MAXIBOND CEMENT FLAMMABLE

Similar documents
SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

TECH BEAD SEALER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

TECH RUB O MATIC AEROSOL

PANGOFOL WHITE NON FLAMMABLE

TECH CHEMICAL VULCANIZING FLUID

PANGOFOL BLACK NON FLAMMABLE

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

ALVIN LAB METAL. Section 1: PRODUCT INFORMATION. Product uses: Metal patching compound. Chemtrec (24h).

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

LABTONE MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

Material Safety Data Sheet

INACTIVE - MOBIL 1 0W-40

Material Safety Data Sheet

COPPER REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

LIQUID HARDENER (MEKP)

DIAMOND KOTE LEATHER/VINYL RESTORER 118,6118

20 20A WHITE AND PASTEL TINTS

TECH CHEMICAL VULCANIZING FLUID

40 40A WHITE AND PASTEL TINTS

DPD REAGENT #3. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

BESSEY SPATTER RELEASE SOLVENT BASED

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

SULFURIC ACID.24N. Section 1: PRODUCT INFORMATION

PINK LIQUID HAND SOAP

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

ACID DEMAND REAGENT (ADR)

Material Safety Data Sheet

HI TEMP LAB METAL HT 14, HT 24

BASE DEMAND REAGENT (BDR)

Material Safety Data Sheet

Material Safety Data Sheet

CALCIUM INDICATOR LIQUID

CALCIUM INDICATOR LIQUID

SOLVENT BASED ANTI SPLATTER (AEROSOL)

DPD REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

TOTAL HARDNESS REAGENT

Material Safety Data Sheet

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

TOTAL HARDNESS REAGENT

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF PRODUCT

SECTION I - IDENTIFICATION

SECTION I - IDENTIFICATION

BESA GLASS 2.1 VOC URETHANE CLEAR COAT

NYOGEL 781D. Product: 781D Revision Date: 2003/03/26. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

TOPAZ. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

10 10A. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

PEWTER. Section 1: PRODUCT INFORMATION B2, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

130 HIGH GLOSS. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

SECTION I - IDENTIFICATION

PEWTER. Section 1: PRODUCT INFORMATION B2, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

M A T E R I A L S A F E T Y D A T A S H E E T

30 30 WHITE AND TINTS

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15

SECTION I - IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PAGE 1

Bloomco/Division of Double B MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet SWEEPING COMPOUND TY II

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

ALTRO W157 WHITEROCK ADHESIVE

MATERIAL SAFETY DATA SHEET PAGE 1

PENNKOTE LIMITED 1950 BOUNDARY ROAD. - WHITBY, ONTARIO. L1N 8P8 BASE COMPONENT OF ALIPHATIC URETHANE COATING.

MATERIAL SAFETY DATA SHEETS

SAFETY DATA SHEET FOR FALK GMAX 6000

Safety Data Sheet EPI-CLENZ FOAMING INSTANT HAND SANITIZERS

SAFETY DATA SHEET KWIK SOLVE 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBER

Page: 1 SAFETY DATA SHEET Revision Date: 01/24/2008 Print Date: 12/7/2010

CB Glass - Liquid Luster SDS Revision Date 01/12/2016. Safety Data Sheet Craft Center Drive Smithville TN Ext 124

MATERIAL SAFETY DATA SHEET

Emergency Telephone Number Emergency Number : CHEMTREC

MATERIAL SAFETY DATA SHEET PAGE 1

Safety Data Sheet - Gorilla Tape (Black, Silver, White and Camo) Date Revised: 05/21/2015 Date Issued: 05/21/2015

Safety Data Sheet Cytology Fixative Spray

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date: 99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

S A F E T Y D A T A S H E E T

SAFETY DATA SHEET Lead Stop

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

Material Safety Data Sheet

Chemical Name CAS Number Weight % ACGIH TLV ACGIH STEL OSHA PELTWA SKIN Acetone ppm N/A 1000ppm Yes

SAFETY DATA SHEET PVC Cold Bond Cement (CC-PVC-001, CC-PVC-002, CC-PVC-010, CC-PVCF-200) Date Prepared: Aug 25, 2016

MATERIAL SAFETY DATA SHEET

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

SAFETY DATA SHEET SR-48

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

Transcription:

MAXIBOND CEMENT FLAMMABLE Product: 658F Chemical family: Mixture. Manufacturer emergency phone number: Section 1: PRODUCT INFORMATION Manufacturer: Truflex/Pang Rubber Products Company, Inc. 200 East Coshocton Street P.O. Box 486 Johnstown, Ohio 43031. Chemtrec 800 424 9300. International: 703 527 3887. Information phone number: 740 967 9015. 800 433 8324. Supplier: Same as manufacturer. Product name: Maxibond cement flammable (MSDS #6583) Product uses: Rubber cement. Catalog number(s): 658F, 659F TDG classification: ADHESIVES UN1133 Class 3 PG II. Labels required: Flammable liquid. Emergency response guidebook number: 128 EmS number: 3 05 Reportable Quantity (DOT): 100 LBS Hazardous Waste Classification: D001 Effective date: 2009/6/22 Revision No.: 5 Last review: 2009/6/22 HMIS H 1 F 3 R 0 PPE Sec. 7 NFPA: MAXIBOND CEMENT FLAMMABLE Page 1 of 6

Section 2: HAZARDOUS INGREDIENTS C.A.S. Concentration% wgt/wgt Ingredient Name ACGIH TLV TWA LD/50 LC/50 142 82 5 ** MIXED ISOMERIC HEPTANES 400 PPM NOT AVAILABLE 103,000 MG/M3/4H RAT INHALATION 64742 89 8 *78 81 SOLVENT NAPHTHA, LIGHT ALIPHATIC 400 PPM NOT AVAILABLE NOT AVAILABLE Section 2A: ADDITIONAL INGREDIENT INFORMATION Note: (supplier). CAS# 64742 89 8: LC50 14000 16000 ppm/4h rat inhalation. CAS# 64742 89 8: LD50 >25,000 mg/kg rat oral. CAS# 64742 89 8: LD50 >5000 mg/kg rabbit dermal. *: Consists of a complex stream of predominantly C6 to C9 hydrocarbons, exact composition varies. **: Naturally present components of light aliphatic naphtha. Physical state: Liquid. Appearance & odor: Light blue. Strong solvent odor. High viscosity liquid. Odor threshold (ppm): Not available. Section 3: PHYSICAL DATA Vapour pressure (mmhg): 124.00 @ 37.7 C (100 F) Vapour density (air=1): 3.30 Volatiles (%) By volume: 100 Evaporation rate (butyl acetate = 1): 3.6 Boiling point ( C): @ 760 mm Hg. 98.3 110 C (209 230 F) Freezing point ( C): Not available. ph: Not applicable. Specific gravity @ 20 C: 0.75 @ 15.5 C (60 F) Solubility in water (%): Not available. Coefficient of water\oil dist.: Not available. VOC: Not available. Section 4: FIRE & EXPLOSION DATA Flammability: Extremely flammable. Conditions of flammability: Vapours are heavier than air and may travel along the ground and be ignited by flames, sparks or other ignition sources at locations distant from the material handling point. Heat, sparks and open flames. MAXIBOND CEMENT FLAMMABLE Page 2 of 6

Extinguishing media: Carbon dioxide, dry chemical, foam. Special procedures: Self contained breathing apparatus required. Firefighters should wear the usual protective gear. Auto ignition temperature: Not available. Flash point ( C), method: 6.7 (20 F) Lower flammability limit (% vol): 1.0 Upper flammability limit (% vol): 8.0 Explosion Data Sensitivity to static discharge: Take precautionary measures against static discharge. Sensitivity to mechanical impact: Not available. Hazardous combustion products: Oxides of carbon (CO, CO2). Various hydrocarbons. Explosive power: Product (even just residue) can ignite explosively. Chemical stability: Product is stable. Conditions of instability: None known. Hazardous polymerization: Will not occur. Section 5: REACTIVITY DATA Incompatible substances: Strong acids. Strong oxidizing agents. Hazardous decomposition products: See hazardous combustion products. Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Skin contact, eye contact, inhalation and ingestion. Effects of acute exposure Eye contact: May cause irritation. May cause redness and tearing. May cause stinging. May cause swelling. Skin contact: May cause severe irritation, drying, cracking. May cause skin burns. May cause mild irritation. May cause redness or burning sensation. Inhalation: May cause metallic taste. May cause weakness and fatigue. May cause respiratory irritation. May cause loss of coordination. May cause unconsciousness. May cause confusion. May cause dizziness and nausea. May cause coma and death. Breathing large amounts may be harmful. May cause light headedness. May cause nose and throat irritation. MAXIBOND CEMENT FLAMMABLE Page 3 of 6

May cause central nervous system depression. May cause headaches and drowsiness. Ingestion: May cause nausea, vomiting and diarrhea. May cause gastro intestinal irritation. No hazard known for ingestion of small quantities. Aspiration hazard if swallowed. May cause central nervous system depression. Effects of chronic exposure: May affect the central nervous system. May cause kidney effects. May cause liver effects. LD50 of product, species & route: Not available for mixture, see section 2A. LC50 of product, species & route: Not available for mixture see section 2A. Exposure limit of material: See hazardous ingredients section. Sensitization to product: Not available. Carcinogenic effects: Not listed as a carcinogen. Reproductive effects: Not available. Teratogenicity: Not available. Mutagenicity: Not available. Synergistic materials: Not available. Precautionary Measures Gloves/Type: Section 7: PREVENTATIVE MEASURES Respiratory/Type: Chemical resistant gloves. Polyvinyl alcohol gloves. Nitrile gloves. Footwear/Type: NIOSH approved respirator, if necessary. (negative pressure type). Impervious boots. Clothing/Type: Impervious clothing. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: Explosion proof ventilation equipment. Local exhaust and/or general ventilation. Provide sufficient mechanical ventilation to maintain exposure below TLV. MAXIBOND CEMENT FLAMMABLE Page 4 of 6

Leak/Spill: Recover using a pump. Eliminate all sources of ignition. Dike area to prevent spreading. Evacuate all non essential personnel. Prevent entry into drains, sewers, and other waterways. Absorb residual material with sand or other absorbent material. Stop leak if without risk. Wear appropriate protective equipment. Ground handling equipment. Transfer to an approved container for disposal. Notify the appropriate authorities as required. Waste disposal: In accordance with municipal, provincial and federal regulations. Handling procedures and equipment: Keep away from heat, sparks, and open flame. Use adequate ventilation. Wash thoroughly after using, particularly before eating or smoking. Wear personal protective equipment appropriate to task. Empty containers containing residue may cause a hazard. Do not cut, grind, weld or drill empty container. Use proper grounding procedures. Avoid contact with skin, eyes and clothing. Avoid breathing vapor, fumes or mist. Launder contaminated clothing prior to reuse. Do not ingest. Storage requirements: Store away from all sources of ignition. Store away from strong acids or oxidizers. Special shipping information: See transportation information. Section 8: FIRST AID MEASURES Skin contact: Remove contaminated clothing. Wash with mild soap and water. Consult a physician if irritation persists. Eye contact: Flush with water for at least 15 minutes, holding eyelids open with fingers. Consult a physician if irritation persists. Inhalation: Keep person warm and at rest. Remove victim to fresh air. If breathing is difficult administer oxygen. If not breathing, have qualified person give artificial respiration. Obtain medical attention. Ingestion: If victim is drowsy or unconscious, place on left side with head down. Do not leave individual unattended. Never give anything by mouth to an unconscious person. Do not induce vomiting, seek immediate medical attention. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety. MAXIBOND CEMENT FLAMMABLE Page 5 of 6

Data prepared by: Global Safety Management 3340 Peachtree Road, #1800 Atlanta, GA 30326 Phone: 877 683 7460 Fax: (877) 683 7462 See www.techtirerepairs.com for the latest MSDSs. Web: www.globalsafetynet.com Email: info@globalsafetynet.com. MAXIBOND CEMENT FLAMMABLE Page 6 of 6