Contrans P HART Transitter ASD 800 / 810 with Reote Seal for Gauge / Absolute Pressure and Level Span: 60 to 600 (16 abs) (6 kpa to 60,000 kpa) (6 kpa to 1,600 kpa abs) 10/ (624.bp) n Isolation between Process and Transitter with Measuring Media having: High Teperatures and Viscosities Corrosive Ingredients, a Tendency to Polyerization n Prevention of Deposits in the Process Connection Flanges by Extended Reote Seals n Mounting to various DIN or ANSI Flanges n Microprocessor technology n HighTurn down ratio 30 : 1 n Digital counication using the "HART"-Protocol without disturbing the output signal 4...20 A n Lower range value, span and daping are externally adjustable n Transfer response configurable: linear freely prograable PID-controller n "Intrinsic Safety" or "Flaeproof Enclosure" explosion protection or ounting on "Zone 0" n E.M.C. according to IEC 801 The transitter ASD 800 / 810 cobines proven, ature technology with a trend-setting icroprocessor controlled electronic. It is based on a proven, highly-stable easuring sensor, on which a reote seal is fitted. The pressure present is transferred via the diaphrag and the filling liquid to the internal sensing diaphrag in the easuring sensor and converted into an electrical signal by the electronics. The reote seals, which depending on type, are either connected directly to the transitter or via a flexible capillary tube. The length of the capillary tube is deterined by the location and ounting position. Apart fro the high accuracy, with an alost coplete copensation of abient influences, both easuring sensor and electronic provide a substantial increase in functionality. The digital indicator can be so configured that the easured value is shown as a physical unit, percentage value or current. In addition the easuring sensor teperature can be indicated. The process wetted parts of the reote seal can be selected fro various aterials, i.e. Stainless Steel, Hastelloy C or Tantalu, depending upon the required resistance to corrosion. Various filling liquids, for exaple for the food and beverage industry, coplete the spectru of applications. The Transitter ASD 800 / 810 with reote seal is thus an efficient, intelligent eleent, a ust for every type of autoation.
Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Measuring Mechanis Measuring liits ASD 800: -100% ($ -1 ) and +100% of the ax. span ASD 810: 0% and +100% of the ax. span Lower range value Continuously adjustable between the easuring liits Span The in. and ax. span is depending of the Reote Seal Type and the Noinal Pressure. Span values see Table 1 on side 4. The span is continuously adjustable. Characteristic C Linear, rising or falling C Freely prograable Over-ranging liit Order No. V15956AE or V15957AE: ranges # 400 : 10 range 2.5 : 25 range 16 : 32 Order No. V15936AE: ranges 2.5...250 : 2 ties the range end value range 600 : 900 Materials of Process Wetted Parts see Ordering Data Materials of non Process Wetted Parts! Capillary tube: Stainless Steel! Protective tube: Stainless Steel or with PVC covering! Flange: Stainless Steel Power Supply Transitter operating voltage U B,ax DC 45 V U B,in DC 11.5 V Output signal 4...20 A Output signal liits I in 3.5 A, I ax 22.5 A Standard adjustent: I in 3.8 A and I ax 20.5 A Load R # & S ' ' Digital Counication Standardized counication protocol "HART" 5.1 Miniu load for counication: 250 S Recoended lead-length for counication:! screened ulti-wire: ax. 1.5 k! screened two-wire: ax. 3 k Max. perissible voltage ripple of the power supply during counication:! 7 V pp at 50 Hz # f # 100 Hz! 1 V at 100 Hz < f # 200 Hz pp! 0.2 V pp at 200 Hz < f # 300 Hz The following can, for exaple, be configured:! Digital indication of process pressure, teperature, percentage value, current, arbitrary process variables! Daping! Transfer function! Alar signalling I in / Iax! PID Controller; adjustent with five paraeters C Setpoint w C Proportional gain K p C Reset tie Tn C Derivative gain K D C Derivative action tie T D Write-over of paraeters can be prevented by interlocking writeover protection. All stored data is secured even in the event of power supply failure. A detailed description of all functions can be found in the Instructions 42/15-910 EN. General and Safety Data Abient Conditions Storage and transport teperature range -50EC...+80EC Transitter Abient teperature inial: dependent of the filling liquid, axial: +80 Mediu teperature at reote seal Directly connected: Abient teperature # 40: ax. +180 Abient teperature +60: ax. +140 inial ediu teperature dependent on the filling liquid (see Table 2, page 4) Reote seal with Running Union and Buna O-ring axial +120 with Capillary tube: dependent on the filling liquid (see Table 2, page 4) with the following restrictions:! Flush diaphrag DN25 / DN 1": axial +250! Flush diaphrag, Mat l: tantalu: axial +220! In-line reote seal DN 25 / DN 1": axial +250 Huidity #95%, annual ean, condensation perissible Aplifier Enclosure, Weight Material Die cast copperfree aluiniu (GD-AlSi) / polycarbonate Protective varnish Epoxy resin, gravel-grey, RAL 7032 Degree of Protection IP 65 (jet waterproof) according to EN 60 529 (/ NEMA standard type 4) Weight! Flange Reote Seals with Flush diaphrag / Extended diaphrag DN 50 / 2", DN 80 / 3": - DN 50, PN 16/40 with Flush diaphrag: approx. 3.3kg - DN 2", Class 300 with Flush diaphrag: approx. 3.7kg - DN 50, PN 16/40 with Extended diaphrag 100: approx. 4.0kg - DN 2", Class 300 with Extended diaphrag 100: approx. 5.4kg - DN 80, PN 16/40 with Flush diaphrag: approx. 5.8kg - DN 3", Class 150 with Flush diaphrag: approx. 5.3kg - DN 80, PN 16/40 with Extended diaphrag 100: approx. 7.5kg - DN 3", Class 150 with Extended diaphrag 100: approx. 7.0kg! Flush Diaphrag Reote Seals DN 25 / DN 1", Miniature Reote Seals, In-line Reote Seals and Fast Coupled Reote Seals: see Diensional Diagras. In addition to the quoted weights, the weight of the transitter, approx. 1.4 kg and the weight of the capillary tube, if fitted at approx. 0.15 kg /, ust be added. Mounting Mounting Instructions! Reote Seal with Capillary Tube: The axiun difference in height between the reote seal and the transitter when ounting the reote seal below the transitter is: with silicone oil (IC) 5 with carbon fluoride (L)2.5 with high teperature oil (IH)5 with vegetable oil (PF)2.5 With an operating pressure < 1000 abs, the transitter ust be ounted below the reote seal. The iniu bending radius of the capillary tube is 75 ; do not kink! Page 2 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Mounting! Flange Reote Seal with Flush / Extended diaphrag The reote seal is ounted at the connecting flange on site. Only gaskets of soft aterials to be used with reote seals having diaphrags and sealing surfaces ade of tantalu (Gasket not supplied).! In-line Reote Seal The reote seal is ounted direct in the process piping between two flanges.! Reote Seal with Fast Coupling The reote seal is ounted directly onto the process via either a Running union or a clap connection.! Miniature Reote Seal The threaded reote seal is screwed with the available threaded process connector.! Transitter The transitter is wall or pipe ounted or by an instruent support fitting according to DIN 16 281, when the transitter is connected to the reote seal with a flexible capillary tube. When the transitter is directly connected to the reote seal then no suppleentary ountings or supports are necessary. Diensions see Diensional Diagras. Transient Response (at reference conditions) (see Instruction 42/15-936 EN for further data) All values are liit values and refers to the output span. The effects identified with a are with reference to the easuring range and are to be ultiplied by the turn-down factor. The ratio range/calibrated span should be as sall as possible. However the liit values and response ties are dependent upon the reote seal and the easuring point. Data for the instruent cobination are first possible after knowledge of all the data subitted in the questionnaire 80/15-105 EN (see pages 13 and 14). Data for transitter (without effect fro the reote seal): Confority including hysteresis and dead band, terinal-based 0.1 % Hysteresis 0.05 % Power supply Voltage effect per Volt 0.005 % The following specifications are valid for a linear transfer function. The effect appearing at the output with non linear transfer functions is dependent on the function and is to be calculated accordingly. Abient teperature effect according to DIN 16 086 Theral change (-20EC...+60EC) on zero 0.1 % on span 0.1 % Teperature coefficient (-40...+80) 2) on zero 0.05 %/10K on span 0.05 %/10K Long-ter drift within 6 onths 0.05 % Rise tie according to DIN 16 086 dependent on range and turn-down factor 0.15...1.3 s additional adjustable tie constant 0...60 s Explosion Protection M for Zone 0" Type Approval (Gerany only) according to VbF (Geran Regulations for Flaable Liquids) "Zone 0" Instruent Construction (Gerany only) The instruent cobination consists of 1 reote seal and the associated transitter. The reote seal is installed on the "Zone 0" easuring point. The transitter ust be designed in the "Intrinsic Safety EEx i" or Flaeproof Enclosure EEx d Type of Protection. M for Zone 1" When the transitter is installed in "Zone 1", the type of protection "Intrinsic Safety EEx i" is sufficient. PTB-No. Ex-93.C.4004 (ASD 800/810) Explosion protection Intrinsic Safety "i" Identification Code (DIN EN 50 014): EEx ia IIC T6 Type Approval Certificate: PTB No. Ex-93.C.4004, copy can be obtained under No. 49/15-34 EX. Connected to an intrinsically safe current circuit with the following ax. values: Teperature class U ax I ax P ax Max. abient teperature T6 45 V 130 A 0.5 W 40 EC T5 45 V 130 A 0.8 W 40 EC T4 45 V 130 A 1.0 W 80 EC T4 45 V 130 A 1.2 W 60 EC internal capacitance C # 0.010 µf eq internal inductance is negligably sall Explosion protection Flaeproof Enclosure "d" (Only with Order No. V15936AE...) Identification Code (DIN EN 50 014): EEx d IIC T6 Type Approval Certificate: PTB No. Ex-91.C.1077 Operating conditions: ax. abient teperature 75EC Test Certificat can be obtained under No. 49/15-33 EX. M for Zone 2" BASEEFA Type N Approval (BS 694 Ex N IIC T5 (T : -40 up to +80 ) ab Additionally with turn-down factor >1:10 & 2) With carbon fluoride filling liquid (only Order No. V15936AE...) -20EC...+80EC 08.2000 Page 3 of 20
+ Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Table 1: Type of Construction, Spans and Lengths of Capillary tube with Fast Coupling Reote Seal Type Noinal Diaeter Spans in / ax ax. Length of Capillary Tube Flush Diaphrag DN 50 / DN 2" 100 / 100 16 Extended Diaphrag In-Line Reote Seal DN 25 / DN 1" 1.6 / 250 6 DN 80 / DN 3" 60 / 100 16 DN 50 / DN 2" 160 / 100 16 DN 80 / DN 3" 60 / 100 16 DN 25 / DN 1" 4 / 250 4 DN 40 / DN 1 1/2" 2.5 / 250 6 DN 50 / DN 2" 2.5 / 250 8 DN 80 / DN 3" 2.5 / 250 16 Running Union DN 50 1.3 / 25 -- acc. to DIN 11 851 Clap-connection DN 2" 6 / 40 -- G 1 A 6 / 600 -- Miniature Reote Seal G 1 1/2 A 1.2 / 600 -- With ASD 810 use 400 abs. range. When selecting transitter range please take noinal pressure (PN) of Reote seal into consideration! Table 2: Application Liits: perissible Teperature / Miniu Operating Pressure Attention:! The pressure has to be linearly interpolated between the stated teperatures.! Flush diaphrag reote seals with tantalu diaphrag (Code-No. P02, P05, P08, P11, P14, P17, P20, P23 ) should not be used with operating teperature > 220EC. Filling liquid Silicone Oil Carbon Fuoride High-teperature Vegetable Oil Vacuuproof Oil Design Identification IC L IH PF IC 3 Density at 20 in kg/ 1055 1880 1070 920 1055 Operating Teperature in -30...+250-30...+150-10...+400-10...+250-30...+200 Pressure rating in abs. at 20 > 500 > 1000 > 500 > 500 > 5 100 > 500 > 1000 > 500 > 1000 > 25 150 > 500 > 1000 > 500 > 1000 > 38 200 > 750 --- > 750 > 1000 > 50 250 > 1000 > 1000 > 1000 --- 400 --- > 1000 --- Electrical Connections Functional Diagra-Counication Cable gland or feale thread (standard) One Han 8U plug (option) ~79 Contrans P p + # AS 800 + + UB US I A+ FSK Power supply TEST FSK ode Screw terinals for 0.5...2.5 2 wires CD0037BE.EPS Plug connection diagra 1 61 2 + Socket-insert (view on sockets) RS 232C IBIS Page 4 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Ordering Data Order No. DM DM intern Transitter ASD 800 / ASD 810 V159 AE- Measuring range (ASD 800 for Gauge Pressure / Level) MB 0... 60 (6 kpa) 56 10X X10 0... 400 (40 kpa) 56 10X X14 0... 2.5 (250 kpa) 56 20X X18 0... 16 (1600 kpa) 56 20X X22 0... 40 (4000 kpa) 36 20X X24 0... 100 (10000 kpa) 36 20X X26 0... 250 (25000 kpa) 36 20X X28 0... 600 (60000 kpa) 36 10X X30 2) adjusted fro... to... //kpa or in acc. with questionnaire Y04 (data is necessary) Measuring range (ASD 810 for Absolute Pressure) 0... 400 abs. (40 kpa abs.) 0... 2.5 abs. (250 kpa abs.) 0... 16 abs. (1600 kpa abs.) adjusted fro... to... //kpa abs. or in acc. with question- 2) naire (data is necessary) 57 10X X70 57 20X X74 57 20X X78 Vacuu easureent Vacuuproof design (is always necessary with ASD 810 ) 739 Filling liquid (in easuring echanis, only with ASD 800 with Order No. V15936AE...) Silivone oil Carbon fluoride (in. abient teperature -20EC) Output signal 4... 20 A, linear 023 4... 20 A, Characteristic acc. to table of values, ax. 22 pairs: Input (%); Output (%) 221 Electrical connection One Pg 13.5 cable gland 044 Two Pg 13.5 cable gland 268 1 Two / 2-14 NPT feale threads 270 One plug connector (Han 8U) 272 The three-digit code nubers are added to the order nuber, separated by diagonal strokes. Further instruent variations on the next page. 2 2 Possible units:,, Pa, kpa, H2 O, Hg, psi, g/c, kg/c, inches H2 O, inches Hg, feet H2O. 2) Copleted questionnaire (pages 12/13) necessary, when connection via capillary tube takes place and reote seal and transitter are not at the sae height. Y04 070 133 MB OR MWF ELA 08.2000 Page 5 of 20
Transitter ASD 800 / ASD 810 with Attached Reote Seal Additional Ordering Data for ASD 800 / ASD 810 Instruent Options Code-No. DM DM intern Explosion Protection EX Ex-design: EEx ia IIC T6 557 Eex d IIC T6 only with Order No. V15936AE... 558 FM Explosion Proof A and in conjunction with Code-No. 270 552 CSA Intrinsically Safe 561 BASEEFA Type N, Ex N II C T5 274 Indicating instruent Analogue indicating instruent (Scale: 0...100% linear): Noral or Ex "i" design 206 Digital indicating instruent (indicates %. However with Code-No. 415: process pressure): Noral- or Ex-design EEx ia 244 Digital indicating instruent (indicates %. However with Code-No. 415: process pressure): Ex-design EEx d 245 Scale indication... (please define value: e.g. 0...15 ; 4...20 A proportional; only cobi- 416 nable with Code-No. 244/245, not with Code-No. 415) Prograable Paraeter PID-Controller, 415 Paraeter: noinal value in %; K p (0...40); T n in sec. (0,1...3600); K D (0...40); T D in sec. (1...3600) 2) Alar signalling with 3.6 A (standard: 21 A) 417 Maxial output current... 418 (please state value 20...22.5 A; Standard: 20.5 A) Minial output current... 420 please state value 3.5...4 A; Standard: 3.8 A) Electrical Daping TG... 259 (state value to be adjusted, 0...60 s) Tagging on Type plate (axial 32 characters) 205 on Tie-on plate, Mat l stainless steel (axial 32 characters) 202 Mounting bracket Bracket for wall ounting (carbon steel) 141 Bracket and U-bolts for 2" pipe ounting (carbon steel) 142 Bracket for wall ounting (stainless steel) 143 Bracket and U-bolts for 2" pipe ounting (stainless steel) 144 Instructions 3) geran english french The three-digit code nubers are added to the order nuber, separated by diagonal strokes. 3 3 3 Possible units: pressure units, as listed under "adjusted fro... to... ";, c,, inches, feet,, l, rels, gallons, yard, inches, 3 feet, g, kg, t, pounds, short tons, long tons (further units see Technical Inforation: B 92 M 508 V) 2) To optiise the process it is necessary to have the additional facilities available with IBIS and a ode. When no values stipulated-standard values will be prograed i.e. setpoint 50% and K p 1. T n, K D and T D are switched off (0). 3) One geran copy included in the scope of supply - no specification required. Further operating instructions have to be charged (please indicate nuber of copies). Scope of Supply: Supplied against special order: 1 Instructions Power supply e.g. TZN 128 ( 18-8.39 EN), 1 Instruent socket with plug connector Mounting Accessories ( 15-8.98 EN), Counication software IBIS ( 15-6.96 EN), FSK-Mode for the digital Counication ( 15-6.97 EN), Spare Parts Transitter ASD. Z2D Z2E Z2F ANZ MES GA Page 6 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Reote Seal DN 25 / DN 1" (with internal diaphrag) Varianten Code-Nr. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube 699 754 Materials Diaphrag and sealing surface, Material: stainless steel 316 Ti st.st. (1.457 Sealing ring (only with noinal pressure up to PN 63 or 600 psi) PTFE Flange acc. to DIN 2501, Mat l 316 Ti st.st. (1.457 Noinal Diaeter Pressure rating Sealing Surface DN 25 PN 10/40 For D (DIN 2526) P70 DN 25 PN 10/40 For N (DIN 2512) P71 DN 25 PN 63/100 For D (DIN 2526) 701 DN 25 PN 160 For D (DIN 2526) 702 DN 25 PN 250 For D (DIN 2526) 703 acc. to ANSI B 16.5, Mat l 316 Ti st.st. (1.457 Noinal Diaeter Pressure rating Sealing Surface DN 1" Class 150 psi For RF P72 DN 1" Class 300 psi For RF P73 DN 1" Class 600 psi For RF 706 DN 1" Class 1500 psi For RF 707 ANZ MES Filling liquid Silicon oil Vakuuproof design 074 739 MWF Lengths of capillary tube (standard lengths) 1 2 4 6 Special lengths between 1 and 6: Basic price of the next longer standard length plus an extra fee 764 Special Features Capillary tube with PVC protective cover 775 FEP DZ0 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. 755 757 759 760 When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered (Code-No. 739). 08.2000 Page 7 of 20
Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Seal / Extended Diaphrag Seal DN 50 / DN 2" coplete with Flange Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube 699 754 Noinal Diaeter Sealing Surface Diaphrag / Sealing Surface Material DN 50 For E (DIN 2526) 316 L st.st. (1.4404) P00 Hastelloy C P01 Tantalu P02 For V13 (DIN 2513) 316 L st.st. (1.4404) P03 Hastelloy C P04 Tantalu P05 For N (DIN 2512) 316 L st.st. (1.4404) P06 Hastelloy C P07 Tantalu P08 DN 2" For RF (ANSI B 16.5) 316 L st.st. (1.4404) P09 Hastelloy C P10 Tantalu P11 Pressure rating DN 50 PN 16 / 40 P30 PN 64 P31 PN 100 P32 DN 2" Class 150 psi B P33 only in conjunction with Sealing Surface Class 300 psi C P34 For RF Class 600 psi D P35 Flush diaphrag / Extended diaphrag Reote seal with Flush diaphrag (without Extension) P50 Reote seal with Extension (not cobineable with diaphrag aterial Tantalu ) DN 50 / DN 2" Extension, Mat l 316 L st.st. (1.4404) Extension length 50 P51 Extension length 100 P52 Extension length 150 P53 Extension, Mat l Hastelloy C Extension length 50 P54 Extension length 100 P55 Extension length 150 P56 Filling liquid (data always necessary) Silicone oil Carbon fluoride Vegetable oil (suitable for the use in the food and beverage industry) High-teperature oil (not for directly connection, Code-No. 699) Vacuuproof Design Lengths of capillary tube (standard lengths) 1 2 4 6 8 11 16 Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee 074 687 673 663 739 755 757 759 760 761 762 773 Special features Diaphrag with FEP-coating 662 (for Mat l 316 L st.st. (1.4404) and Hastelloy C, ediu teperature #150 ) Capillary tube with PVC protective cover 775 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. For ounting fro Reote seals in Sandwich -construction (additional blank flange required) see 15-8.14 EN. 764 ANZ MWF FEPDZ The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Page 8 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Seal / Extended Diaphrag Seal DN 80 / DN 3" coplete with Flange Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube 699 754 Noinal Diaeter Sealing Surface Diaphrag / Sealing Surface Material DN 80 For E (DIN 2526) 316 L st.st. (1.4404) P12 Hastelloy C P13 Tantalu P14 For V13 (DIN 2513) 316 L st.st. (1.4404) P15 Hastelloy C P16 Tantalu P17 For N (DIN 2512) 316 L st.st. (1.4404) P18 Hastelloy C P19 Tantalu P20 DN 3" For RF (ANSI B 16.5) 316 L st.st. (1.4404) P21 Hastelloy C P22 Tantalu P23 Flange / Pressure rating DN 80 PN 16 / 40 P36 PN 64 P37 PN 100 P38 DN 3" Class 150 psi B P39 only in conjunction with Sealing Surface Class 300 psi C P40 For RF Class 600 psi D P41 Flush diaphrag / Extended diaphrag Reote seal with Flush diaphrag (without Extension) P50 Reote seal with Extension (not cobineable with diaphrag aterial Tantalu ) DN 80 / DN 3" Extension, Mat l 316 L st.st. (1.4404) Extension length 50 P57 Extension length 100 P58 Extension length 150 P59 Extension, Mat l Hastelloy C Extension length 50 P60 Extension length 100 P61 Extension length 150 P62 Filling liquid (data always necessary) Silicone oil Carbon fluoride Vegetable oil (suitable for the use in the food and beverage industry) High-teperature oil (not for directly connection, Code-No. 699) Vacuuproof Design Lengths of capillary tube (standard lengths) 1 2 4 6 8 11 16 Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee 074 687 673 663 739 755 757 759 760 761 762 773 Special features Diaphrag with FEP-coating 662 (for Mat l 316 L st.st. (1.4404) and Hastelloy C, ediu teperature #150 ) Capillary tube with PVC protective cover 775 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. For ounting fro Reote seals in Sandwich -construction (additional blank flange required) see 15-8.14 EN. 764 ANZ MWF FEPDZ The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. 08.2000 Page 9 of 20
Transitter ASD 800 / ASD 810 with Attached Reote Seal In-Line Reote Seal DN 25...DN 80 / DN 1"... 3" Options Code-Nr. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube 699 754 Pressure rating PN 6... PN 400 or Class 150 psi...class 2500 psi Connection acc. to DIN 2501 or ANSI B 16.5 Diaphrag and Sealing surface, Material 316 Ti st.st. (1.457 Noinal diaeter Sealing surface DN 25 / DN 1" For E (DIN 2526) / For RF 740 DN 40 / DN 1 1/2" For E (DIN 2512) / For RF 741 DN 50 / DN 2" For E (DIN 2526) / For RF 742 DN 80 / DN 3" For E (DIN 2526) / For RF 743 Diaphrag and Sealing surface, Material Hastelloy C Noinal diaeter Sealing surface DN 25 / DN 1" For E (DIN 2526) / For RF 744 DN 40 / DN 1 1/2" For E (DIN 2512) / For RF 795 DN 50 / DN 2" For E (DIN 2526) / For RF 749 DN 80 / DN 3" For E (DIN 2526) / For RF 727 Filling liquid Silicone oil Carbon fluoride High teperature oil Vegetable oil Vacuuproof Design Lengths of capillary tube 1 755 2 757 4 (axial lengths with DN 25 / ANSI 1") 759 6 (axial lengths with DN 40 / ANSI 1 1/2") 760 8 (axial lengths with DN 50 / ANSI 2") 761 11 762 16 (axial lengths with DN 80 / ANSI 3") 763 Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee 764 Special Features Capillary tube with PVC protective cover 775 FEP DZ0 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. 074 687 663 673 739 ANZ MES MWF When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Page 10 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Fast Coupled Reote Seals DN 50 / DN 2" Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) 699 Mounting to pressure-easuring echanis with capillary tube with Running Union acc. to DIN 11 851 Noinal diaeter Pressure rating Process wetted parts DN 50 PN 25 316 Ti st.st. (1.457 712 DN 50 PN 25 Hastelloy C 713 with Clap-Connection Noinal diaeter Pressure rating Process wetted parts DN 2" PN 40 316 Ti st.st. (1.457 716 DN 2" PN 40 Hastelloy C 726 MES Sealing ring (O-ring) (only in conjunction with running union acc. DIN 11 85 Buna (tax 120 ) PTFE Filling liquid Silicone oil Carbon fluoride Vegetable oil Vacuuproof Design Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. 714 715 074 687 673 739 MWF The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Miniature Reote Seal Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) 699 with Spigot acc. to DIN 16 288 2) Process connection Pressure rating Process wetted parts G 1 A PN 600 316 Ti st.st. (1.457 G 1 A PN 600 Hastelloy C G 1 1/2 A PN 600 316 Ti st.st. (1.457 G 1 1/2 A PN 600 Hastelloy C Filling liquid Silicone oil Carbon fluoride Vegetable oil Vacuuproof Design Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. 708 710 709 711 074 687 673 739 MES MWF When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. 08.2000 Page 11 of 20
Transitter ASD 800 / ASD 810 with Attached Reote Seal Questionnaire 80/15-105-1 EN (page 1 of 2) Location Measuring instruents with reote seals for easuring gauge pressure, differential pressure, flowrate and level The inforation given in this questionnaire is binding for the technical design of easuring syste. The HARTMANN & BRAUN AG can only guarantee satisfactory easureent results when exact and correct inforation is provided. The questions identfied by will be answered by Hartann & Braun. Copany Custoer nuber: Measuring-point nuber: Level Measureent H&B offer nuber: H&B contract nuber: Position nuber: 1 Mediu to be easured Measuring instruent with one reote seal (see Fig. Measuring instruent with two reote seals (see Fig. 2) 2 3 4 5 6 7 Operating data of the ediu to be easured which will be referred to for the calculation and design Teperatures Process pressure Density Density of the gas above the process Process variable (e.g. 0... 5 0... 20A) Elevation between reote seal and easuring instr. Instruent above the reote seal Instruent below the reote seal Difference in elevation of the two reote seals Tank diensions: Difference in height of levels Diension: fro lower reote seal up to lower level fro lower reote seal up to upper level Capillary tube length + (HP) side (LP) side Additional data Process teperature range Average abient teperature at the easuring instr. Average abient teperature at the capillary tube t a a c b d M + t M t um t uk kg/ 3 0/4...20A) t p e c b d M G fro... to... t M fro... to... t um t uk kg/ 3 3 kg/ 0/4...20A) 8 Data of liits which for exaple can occur with cleaning processes or blowing through (not easuring operation) Teperature Pressure t ax t in pax pin t ax t in pax pin Note: Reote seals with silicone oil (standard) ay be ounted up to a axiu of 5 below the easuring instruent. Measuring instruent Fig. 1 Fig. 2 Reote seal H 2 Measuring H 2 instruent H 1 lower level H 2 upper level a+ 0 a c H 1 H 1 b d Reote seal Tank open to the atosphere Reote seal c b d e Pressuretight closed tank M01281E1.EPS Page 12 of 20 08.2000
Transitter ASD 800 / ASD 810 with Attached Reote Seal Questionnaire 80/15-105-1 EN (page 2 of 2) Gauge pressure, Differential pressure and Flowrate Measureent 1 Mediu to be easured Measuring instruent with one reote seal (see Fig. 3) Measuring instruent with two reote seals (see Fig. 4) 2 3 4 Operating data of the ediu to be easured which will be referred to for the calculation and design Teperatures Process pressure Measuring span Differential pressure Density of the gas above the process Process variable (e.g. 0... 500 0... 20A) Elevation between reote seal and easuring instr. Instruent above the reote seal Instruent below the reote seal Difference in elevation of the two reote seals 5 Capillary tube length + (HP) side (LP) side 6 Additional data Process teperature range Average abient teperature at the easuring instr. Average abient teperature at the capillary tube t p a a M M + t M fro... to... t um t uk kg/ 3 0/4...20A t p1 p2 M p p 1 p 2 M e t M fro... to... t um t uk kg/ 3 0/4...20A 7 Data of liits which for exaple can occur with cleaning processes or blowing through (not easuring operation) Teperature Pressure t ax t in pax pin t ax t in pax pin Note: Reote seals with silicone oil (standard) ay be ounted up to a axiu of 5 below the easuring instruent. Measuring instruent Fig. 3 Fig. 4 Reote seal p2 h+ Measuring instruent 0 p 1 e Piping h Reote seal Piping p1 Measuring instruent Reote seal e.g. also with filter easureents; in front of and behind the filter Copiled:,Date 19 Copany stap (Signature) M01282E1.EPS 08.2000 Page 13 of 20
Flush Diaphrag Seal / Extended Diaphrag Seal DN 50 / DN 2", DN 80 / DN 3" coplete with Flange Diensional Diaphrag Sealin rings and fixing aterials not supplied! Directly Connected M Flush diaphrag reote seals Mounting with Capillary Tube M Flush diaphrag reote seals M Extended diaphrag reote seals M Extended diaphrag reote seals For V13 Sealing Surface Sealing Surfaces: For E (DIN 2526), For N (DIN 2512), For RF (ANSI B16.5) Noinal diaeter DN Pressure rating PN i D i k Extension-i d 1 i d 2 i d 3 t b Screws Nuber Thread PN 16/40 165 125 51 57 102 3 +0.5 20 4 M 16 50 PN 64 180 135 51 57 102 3 +0.5 26 4 M 20 PN 100 195 145 51 57 102 3 +0.5 28 4 M 20 PN 16/40 200 160 76 75 138 3 +0.5 24 8 M 16 80 PN 64 215 170 76 75 138 3 +0.5 28 8 M 20 PN 100 230 180 76 75 138 3 +0.5 32 8 M 24 class 150 152.4 120.6 51 57 92.1 3 +0.5 17.4 4 M 18 2" class 300 165.1 127.0 51 57 92.1 3 +0.5 20.6 8 M 18 class 600 165.1 127.0 51 57 92.1 6.35 31.75 8 M 18 class 150 190.5 152.4 76 75 138 3 +0.5 22.2 4 M 16 3" class 300 209.5 168.3 76 75 138 3 +0.5 27.0 8 M 20 class 600 209.5 168.3 76 75 138 6.35 38.05 8 M 20 Page 14 of 20 08.2000
Flush Diaphrag Reote Seals DN 25 / DN 1", Miniature Reote Seals Diensional Diagras Flush Diaphrag Reote Seals DN 25 / DN 1" with internal Diaphrag PN 10/40 or Class 150 / 300 Miniature Reote Seals PN 63... 250 or Class 600 / 1500 DN (G) PN Diensions in d M SW d l h Weight in kg G 1 A 600 25 41 39 28 64 0.3 G 1 1/2 A 600 40 55 60 30 50 0.5 effective diaphrag diaeter d M SW width across flats Connection acc. to DIN 2501 DN PN Diensions in D k d 4 b f H d 2 G 2 25 10 / 40 115 85 68 22 2 -- 14 -- 1.5 63 / 100 140 100 68 24 2 52 -- 4xM16 3.2 25 160 140 100 68 24 2 52 -- 4xM16 3.6 250 150 105 68 28 2 56 -- 4xM20 4.0 Connection acc. to ANSI B 16.5 DN Class Diensions in D k d 2 d 4 b f H G 2 UNC 1" 1" 150 110 79.5 16 51 22 2 -- -- 1.4 300 125 89 20 51 22 2 -- -- 1.7 600 125 89 -- 51 25 7 53 4x5/8" 3.6 1500 150 101.5 -- 51 36 7 64 4x7/8" 4.0 08.2000 Page 15 of 20
In-Line Reote Seals, Fast Coupeld Reote Seals Diensional Diagras In-Line Reote Seals (witout flanges) Fast Coupled Reote Seals M with Running Union DN 50, PN 25 ax SW27 width across flats 27 Connection acc. to DIN 2501 / acc. to ANSI B 16.5 acc. to DIN 11 851 DN in / inch PN in / psi Diensions in D L H Weight in kg Diensions in Design Weight d M D H ca. k G 2 in kg 25 / 1" 6...400 / 150...2500 63 60 110 1.4 52 92 57 22 Rd 78 x1/6 For D-F 0.8 40 / 1 1/2" 50 / 2" 6...400 / 150...2500 6...400 / 150...2500 85 60 132 2.2 95 60 187 2.5 M with Clap-connection DN 2", PN 40 ax 80 / 3" 6...400 / 150...2500 130 60 222 4.0 Diensions in d M D H ca. h ca. Weight in kg 40 75 58 35 0.75 effective diaphrag diaeter d M Page 16 of 20 08.2000
Transitter ASD 800 / ASD 810 for Flush / Extended Diaphrag Reote Seals and Fast Coupled Reote Seals Diensional Diagras Errors and oissions excepted. All diensions in illieters (). 1 Reote seal connection 2 Electrical connection: Pg 13.5 cable gland or two cable glands, one each on the righr and left or 1/2-14 NPT feale threads on both sides or one Han 8U plug. 3 Type plate 4 Locking excenter (only with EEx d - design) Order No. V15956AE-... V15957AE-... Order No. V15936AE-... Di. "a" 141 148 5 Enclosure cover (electrical connection, connection for digital- / analogue indicating instruent) 6 Tie-on plate e.g. for tag nuber (option) 7 T-slot for screws when wall or pipe ounting Di. "b" 187 194 With digital indicating instruent plus 29. With analogue indicating instruent plus 24. 2) With directly connected reote seal the length (height) of the reote seal ust be added to diensions "a" and b (see corresponding diensional diagra). 08.2000 Page 17 of 20
Transitter ASD 800/ASD 810 for Miniature / In-Line Reote Seals and Flush Diaphrag Reote Seals DN 25 / DN 1" (up PN 63 / Class 600) Diensional Diagras Errors and oissions excepted. All diensions in illieters (). ~28 ~68 3 78 Contrans 5 a 34 67 b c 18 1 102 53 37.5 MA1027X1.EPS 6 7 44 34 ~79 2 4 ø82 1 Reote seal connection 2 Electrical connection: Pg 13.5 cable gland or two cable glands, one each on the righr and left or 1/2-14 NPT feale threads on both sides or one Han 8U plug. 3 Type plate 4 Locking excenter (only with EEx d - design) Order No. V15956AE-... V15957AE-... Order No. V15936AE-... Di. "a" 124 120 Di. "b" 169 165 Di. "c" 151 147 5 Enclosure cover (electrical connection, connection for digital- / analogue indicating instruent) 6 Tie-on plate e.g. for tag nuber (option) 7 T-slot for screws when wall or pipe ounting With digital indicating instruent plus 29. With analogue indicating instruent plus 24. With directly connected reote seal the length (height) of the reote seal ust be added to diension "c" (see corresponding diensional diagra). Page 18 of 20 08.2000
08.2000 Page 19 of 20
ABB Autoation Products GbH Schillerstraß e 72 D-32425 Minden Tel. +49(0)571 830-0 Fax +49(0)571 830-1846 http://www.abb.de/autoation Subject to technical changes. Printed in the Fed. Rep. of Gerany 10/ 08.2000