Contractor's Material and Test Certificate for Underground Piping

Similar documents
For models: 660 EF/EFO

Terminating Head

MODEL : LDF7810WW/ LDF7810BB/ LDF7810ST LDF7811WW/LDF7811BB / LDF7811ST LDS5811WW/ LDS5811BB/ LDS5811ST LDF6810WW/LDF6810BB / LDF6810ST

it500 Internet Thermostat

Gripping force, O.D. gripping. MPZ 20 / 4 bar MPZ 20 / 6 bar. MPZ 20-AS / 4 bar MPZ 20-AS / 6 bar. Gripping force, I.D. gripping

Pneumatic level indicator Unitel

AMP-O-MATIC* Side-Feed Stripper-Crimper III Machine No [ ] customer manual TOOLING ASSISTANCE CENTER

Chlorine ball-valve. Operating instructions. Read the operating manual! The user is responsible for installation and operation related mistakes!

Product Information. Gripper for small components MPG-plus

Product Information. Long-stroke gripper PHL

Product Information. Gripper for small components MPG 32

Bourdon tube pressure gauges for chemical applications with electrical contact

Product Information. Gripper for small components MPG 50

Product Information. Long-stroke gripper PFH-mini

'!' CORDOVA BRANDON GREEN

Fully encapsulated. Reliable. Precise. DPZ-plus Sealed Gripper

Instrumentation. Pumps Valves Instrumentation

THE STATE OIL AND GAS BOARD OF MISSISSIPPI ORDER. This day this cause came on to be heard on the petition

Operating manual. ProSpray Airless high-pressure spraying unit. Model: Original operating manual. ProSpray 3.39

Product Information. Long-stroke gripper PSH 42

Product Information. Gripper for small components MPG 80

Product Information. Universal gripper PZN-plus

Product Information. Radial gripper PRG 52

ValVes InstrumentatIon Product overview

Evaluation of a Center Pivot Variable Rate Irrigation System

Product Information. Gripper for small components MPG-plus 40

1 Exam Prep. Tabs and Highlights

Product Information. Long-stroke gripper PHL 50

ASSEMBLY INSTRUCTIONS. TECHART roof spoiler

Product Information. Long-stroke gripper PHL 63

FK240 FLAT SOLAR COLLECTORS ROOF-TOP INSTALLATION FOR WORCESTER SOLAR SYSTEMS

Superconducting Nanowire Single- Photon Detection System

ST70+ Installation Guide

Product Information. Universal gripper PGN-plus 40

Product Information. Universal gripper PZN-plus 40

Product Information. Universal gripper PGN-plus 80

Product Information. Gripper for small components MPG-plus 32

ST70+ User Reference Manual. Document reference: Date: January 2009

Product Information. Universal gripper PGN-plus-P 100

Nonvoting. A.J. Bartosic, Rohm & Haas Go., PA Herman H. Spaeth, Novato, CA (Member Emeritus) Staff Liaison: Waiter P. Sterling

Bourdon tube pressure gauges for chemical applications with glycerine filling

Product Information. Universal gripper PGN-plus 160

Operating manual. Airless high-pressure spraying unit Exclusive Suppliers of. Maxi Spray 21.XL (PS 3.20)

Product Information. Long-stroke gripper PHL 40

Availability assessment of a raw gas re-injection plant for the production of oil and gas. Carlo Michelassi, Giacomo Monaci

Bourdon tube pressure gauges for chemical applications EN 837-1

Product Information. Universal gripper PGN-plus 200

Bourdon tube pressure gauges for industrial applications

I"IKOEHRING ~ CRANES& KOEHRING HYDRAULIC EXCAVATOR EXCAVATORS. 6620LC Beginning with Ser. No Serial No.

TECHNICAL DATA. TRIMPAC Model B-5 & B-5B

THIS DOCUMENT IS BEST QUALITY AVAILABLE. THE COPY FURNISHED TO DTIC CONTAINED A SIGNIFICANT NUMBER PAGES WHICH DO NOT

Bourdon tube pressure gauges for chemical applications (glycerine filling) EN 837-1

Propane Safety. What to Do in Case of Emergency How to Use Propane Safely Propane Scratch-and-Sniff Test Appliance Safety and Maintenance Tips

Reduced drift, high accuracy stable carbon isotope ratio measurements using a reference gas with the Picarro 13 CO 2 G2101-i gas analyzer

LTC Vacuum Blasting Machine (Metal) Baseline Report: Greenbook (Chapter) Topical Report July 31,1997

Service Manual 3014 / Front-Side Applicator. Made in Germany

MICROWAVE ANTENNAS KS HORN-REFLECTORAND WAVEGUIDE SYSTEM INSTALLATION ANTENNA ASSEMBLY

{_~ hn P. Morello, NY Fire Dept., NY

Combustion Manager W-FM / Installation and operating instruction. info. V esc SIEMENS LMV27.210A2WH W-FM5 VSD X64 AIR X56 VSD X74

III. Identify the initial installation requirements for standpipe systems

Bourdon tube pressure gauges for industrial applications EN 837-1

TECHNICAL DATA. Trimpac 244a. September 16, 2013

Wet pipe low flow foam/water system

Plate & Frame Heat Exchangers

h at p.;ge 1 15 Floracraft" Corporation P.O. Box 400 One Longfellow Place

YONLEY PUD PRELIMINARY APPLICATION

TECHNICAL DATA. Trimpac 251a. Spetember 16, 2013

2017 GIRLS CENTRAL DISTRICT PLAYER DEVELOPMENT GUIDE

Risk analysis of natural gas pipeline

Product Information. Universal gripper PGN-plus 300

FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate

Analysis of Hold Time Models for Total Flooding Clean Extinguishing Agents

Aerator Performance in Reducing Phenomenon of Cavitation in Supercritical Flow in Steep Channel Bed

2018 GIRLS DISTRICT-SPECIFIC PLAYER DEVELOPMENT GUIDE

Coastal Engineering Technical Note

DESIGN DATA A WET PIPE BLADDER TANK FOAM/WATER SYSTEM WITH HYDRAULICALLY ACTUATED DELUGE CONCENTRATE CONTROL VALVE

Planning of production and utility systems under unit performance degradation and alternative resource-constrained cleaning policies

Oklahoma Corporation Commission Oil & Gas Conservation Division Post Office Box Oklahoma City, Oklahoma Rule 165:

2017 GIRLS DISTRICT-SPECIFIC PLAYER DEVELOPMENT GUIDE

Pedestrian Facilities Planning on Tianjin New Area program

USER MANUAL. English. For Sales & Service Contact

TECHNICAL DATA SINGLE INTERLOCKED PREACTION SYSTEM WITH PNEUMATIC RELEASE

Product Information. Universal gripper PZN-plus 64

Model: 720-UL INSTALLATION OPERATION MAINTENANCE. Bermad Pressure Reducing Valve IOM. Model: FP -720-UL Sizes: 2"-12" BERMAD. Application Engineering

DRAFT FOR PUBLIC CONSULTATION INTERCONNECTION AGREEMENT v.2.0 FOR IP KULATA/SIDIROKASTRO DEFINITIONS, BUSINESS RULES, EXCEPTIONAL EVENT

PROPOSED CHANGE TO THE 2015 ONTARIO FIRE CODE (O. Reg. 213/07, as amended current to January 1, 2015)

senes EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 o. 2 Double pneumatic control Spool valves series E

TECHNICAL DATA. Trimpac 257a. September 16, 2013

TECHNICAL DATA. Trimpac 256a. October 31, 2013

DETECTION AND REFACTORING OF BAD SMELL

San Antonio Water System Standard Specifications for Construction ITEM NO. 841 HYDROSTATIC TESTING OPERATIONS

INSTALLATION, OPERATION AND MAINTENANCE GUIDE

AGA / API Auditing Requirements of Fiscal Gas Metering Systems and FCRI Experiences

Numerical Study of Occupants Evacuation from a Room for Requirements in Codes

1 K. Prepared for: Naval Surface Weapons Center. 30 June 1975 DISTRIBUTED BY: InfimitiM Strvict U. S. DEPARTMENT OF COMMERCE AD-A

Engineering Analysis of Implementing Pedestrian Scramble Crossing at Traffic Junctions in Singapore

Instruction manual REF LCH11/16/21, LPH11/16/21. 1 Explanation of symbols. 2 Safety 2.1 Description of danger levels. See chapter 2.

Budgets and Standardized Accounting for Golf Course Maintenance

CAUTION When using any equipment, always follow the manufacturer s instructions for safe operation.

Instruction manual REF LBH11, LBH11P. 1 Explanation of symbols. 2 Safety 2.1 Description of danger levels. See chapter 2. Safety

Transcription:

UNDERGROUND PPNG 13-97 Contractors Materal and Test Certfcate for Underground Ppng PROCEDURE Upon completon of work, nspecton and tests shall be made by the contractors representatve and wtnessed by an owners representatve. All defects shall be corrected and system left n servce before contractors personnel fnally leave the job. A certfcate shall be flled out and sgned by both representatves. Copes shall be prepared for approvng authortes, owners, and contractor. t s understood the owners representatves sgnature n no way prejudces any clam aganst contractor for faulty materal. poor workmanshp, or falure to comply wth approvng authortys requrements or local ordnances. Property name Property address Accepted by approvng authortes (names) Date Plans Address nstallaton conforms to accepted plans D Yes D No Equpment used s approved D Yes D No f no, state devatons Has person n charge of fre equpment been nstructed as to locaton o DYes No control valves and care and mantenance of ths new equpment? f no, explan nstructons Have copes of approprate nstructons and care and mantenance DYes D No charts been left on premses? f no, explan Locaton Supples buldngs Underground ppes and jonts Ppe types and class j Type jont Ppe conforms to standard D Yes n No Fttngs conform to standard D Yes D No f no, explan Jonts needed anchorage clamped, strapped, or blocked n DYes D No accordance wth f no, explan standard Test descrpton Flushng: Flow the requred rate untl water s clear as ndcated by no collecton of foregn materal n burlap bags at outlets such as hydrants and blow-ots. Flush at flows not less than 390 gpm (1 476 Umn) for 4-n. ppe, 880 gpm (3331 Umn) for 6-n. ppe, 1560 gpm (5905 Umn) for 8-n. ppe, 2440 gpm (9235 Umn) for 10-n. ppe, and 3520 gpm (1 3,323 Umn) for 12-n. ppe. When supply cannot produce stpulated flow rates, obtan maxmum avalable. Hydrostatc: Hydrostatc tests shall be made at not less than 200 ps (13.8 bar) for 2 hours or 50 ps (3.4 bar) above statc pressure n excess of 150 ps (1 0.3 bar) for 2 hours. Leakage: New ppe lad wth rubber gasketed jonts shall, f the workmanshp s satsfactory, have lttle or no leakage at the jonts. The amount of leakage at the jonts shall not exceed 2 quarts per hour (1.89 Uhr) per 1 DO jonts rrespectve of ppe dameter. The leakage shall be dstrbuted over all jonts. f such leakage occurs at a few jonts, the nstallaton shall be consdered unsatsfactory and necessary repars made. The amount of allowable leakage specfed above can be ncreased by 1 flud ounce per nch valve dameter per hr. (30 mu25 mm/hr) for each metal seated valve solatng the test secton. f dry barrel hydrants are tested wth the man valve open so the hydrants are under pressure, an addtonal 5 ounces per mnute (1 50 mumn) leakage s permtted for each hydrant. New underground ppng flushed accordng to r: Yes D No standard by (company)!f no, explan How flushng flow was obtaned Through what type openng Flushng D Publc water D Tank or reservor 0 Fre pump D Hydrant butt D Open ppe tests Lead-ns flushed accordng to standard by (company) D Yes! c No f no, explan How flushng flow was obtaned Through what type openng LJ Publc water Cl Tank or reservor D Fre pump D Y connecton to flange LJ Open ppe and spgot FGURE 10.10.1 Sample of Contractors Materal and Test Certfcate for Underground Ppng. 2002 Edton

13-98 NST/1.LL\.TON OF SPRNKLER SYSTEMS All new underground ppng hydrostatcally tested at Jonts covered Hydrostatc test ps for hours DYes D No Total amount of leakage measured Leakage gallons hours test Allowable leakage Hydrants Control valves Number nstalled gallons Type and make hours All operate satsfactorly DYes D Water control valves left wde open DYes D No no, state reason Hose threads of lre department connectons and hydrants nterchangeable wth DYes D No those of fre department answerng alarm No Date lett n servce Remarks Name of nstallng contractor Sgnatures For property owner (sgned) For nstallng contractor (sgned) Addtonafexplanaton and notes Tests wtnessed by J Ttle Ttle 1 Date 1 Date

13-190 NSTALLATON OF SPRNKLER SYSTEMS Contractors Materal and Test Certfcate for Aboveground Ppng PROCEDURE Upon completon of work, nspecton and tests shall be made by the contractors representatve and wtnessed by an owners representatve. All defects shall be corrected and system left n servce before contractors personnel fnally leave the job. A certfcate shall be flled out and sgned by both representatves. Copes shall be prepared for approvng authortes, owners, and contractor. t s understood the owners representatves sgnature n no way prejudces any clam aganst contractor for faulty materal, poor workmanshp, or falure to comply wth approvng authortys requrements or local ordnances. Property name Property address Date Accepted by approvng authortes (names) Plans Address nstallaton conforms to accepted plans 0 Yes 0 No Equpment used s approved 0 Yes 0 No f no, explan devatons Has person n charge of fre equpment been nstructed as 0 Yes 0 No to locaton of control valves and care and mantenance of ths new equpment? f no, explan nstructons Locaton of system Have copes of the followng been left on the premses? 0 Yes 0 No. System components nstructons 0 Yes 0 No 2. Care and mantenance nstructons 0 Yes 0 No 3. NFPA25 0 Yes 0 No Supples buldngs Make Mode! Year of Orfce manufacture sze!! Quantty Sprnklers Ppe and fttngs Type of ppe Type of fttngs Temperature ratng Maxmum tme to operate Alarm Alarm devce j through test connecton valve or Type Make Model : Mnutes Seconds flow ndcator! Dry valve Q.O.D.! Make Model Seral no. Make Model Seral no. Dry ppe Tme to trp Tme water Alarm! operatng through test Water Ar Trp pont reached operated connecton 1,2 ar pressure test outlet 1,2 test pressure pressure properly Mnutes Seconds/ ps ps ps Mnutes! Seconds \ Yes No Wthout 0.00. Wth! O.O.D. J ll no, explan 1 Measured from tme nspectors test connecton s opened 2 NFPA 3 only requres the 60-second lmtaton n specfc sectons FGURE 16-1 Contractors Materal and Test Certfcate for Abovecround " P p na-. " 2002 Edton

1 SYSTEMS ACCEPTA...NCE 13-191 Operaton D Pneumatc D Electrc 0 Hydraulcs Ppng supervsed D Yes 0 No Detectng meda supervsed D Yes 0 No Deluge and preacton valves Does valve operate from the manual trp, remote, or both control statons? s there an accessble faclty n each crcut for testng? Make Model D Yes D No f no, explan D Yes n No Does each crcut operate Does each crcut operate Maxmum tme to supervson loss alarm? valve release? operate release Yes No Yes No Mnutes Seconds Locaton Make and Settng Statc pressure Resdual pressure Pressure and floor, model reducng valve test Test descrpton (flowng) nlet (ps) Outlet (ps) nlet (ps) Outlet (ps) Flow rate Flow (gpm) Hvdrostatc: Hydrostatc tests shall be made at not less than 200 ps (13.6 bar) for 2 hours or 50 ps (3.4 bar) above statc pressure n excess of 150 ps (1 0.2 bar) for 2 hours. Dfferental dry-ppe valve clappers shall be left open durng the test to prevent damage. All aboveground ppng leakage shall be stopped. Pneumatc: Establsh 40 ps (2.7 bar) ar pressure and measure drop, whch shall not exceed -v, ps (0.1 bar) n 24 hours. Test pressure tanks at normal water level and ar pressure and measure ar pressure drop, whch shall not exceed 1 Y2 ps (0. bar) n 24 hours. All ppng hydrostatcally tested at ps (-bar) for hours Dry ppng pneumatcally tested DYes D No Equpment operates properly DYes 0 No f no, state reason Do you certfy as the sprnkler contractor that addtves and corrosve chemcals, sodum slcate or dervatves of sodum slcate, brne, or other corrosve chemcals were not used for testng systems or stoppng leaks? D Yes D No Dran Readng of gauge located near water Resdual pressure wth valve n test Tests test supply test connecton: ps ( bar) 1 connecton open wde: ps ( bar) Underground mans and lead-n connectons to system rsers flushed before connecton made to sprnkler ppng Verfed by copy of the Contractors Materal and Test D Yes D No Other Explan Certfcate for Underground Ppng. Flushed by nstaller of underground sprnkler ppng D Yes D No f powder-drven fasteners are used n concrete, D Yes 0 No f no, explan has representatve sample testng been satsfactorly completed? Blank testng Number used Locatons Number removed gaskets Weldng ppng DYes D No l yes... Do you certfy as the sprnkler contractor that weldng procedures comply n Yes CJ No wth the requrements of at least AWS 82.? Weldng Do you certfy that the weldng was pertormed by welders qualfed n D Yes [J No complance wth the requrements of at least AWS 82.1? Do you certfy that the weldng was carred out n complance wth a 0 Yes D No documented qualty control procedure to ensure that all dscs are retreved that openngs n ppng are smooth, that slag and other weldng resdue are removed, and that the nternal dameters of ppng are not penetrated? Cutouts Do you certfy that you have a control feature to ensure that LJ Yes LJ No (dscs) all cutouts (dscs) are retreved? FGURE 16.1 Contnued 2002 Edton

13-192 NST/1LLATON OF SPRlNKLER SYSTEMS Hydraulc Nameplate provded., f no, explan data nameplate 0 Yes 0 No Remarks Date lett n servce wth all control valves open Name of sprnkler contractor Sgnatures Tests wtnessed by For property owner (sgned) Ttle Date For sprnkler contractor (sgned) Ttle Date Addtonal explanatons and notes