Rigid & Inflatable Boats KOLIBRI PONTOON BOATS KOLIBRI Boat Manufacturing Company a. 4, K.Gordienka str. Dnipro, Ukraine t. +8 (06) 7 7 76 f. +8 (06) 7 7 79 t. +8 (096) 148 11 1- service g. 48 8 19.06 N 8 8.0 E e. info@kolibriboats.com w. kolibriboats.com Rigid & Inflatable Boats PRODUCT CATALOGUE 018
ABOUT THE COMPANY TECHNOLOGIES PVC fabric Inflatable boats KOLIBRI made from five-layer PVC (polyvinylchloride) fabric with density of 60-100 g/m² manufactured by the leading chemical enterprises from Belgium, Germany, France, and South Korea. Tight weaving of reinforcing layer ensures high durability and resistance of material to cuts and punctures. Polyvinylchloride layers provide air- and water-tightness of material. Adhesive gel joins all layers into single highly durable compound. Due to plasticizing additives, material obtains elasticity which is important during boat folding and unfolding especially at low temperatures. Material is resistant to UV emission, salt water, fuels, oils and retains its properties at temperatures from -0 C to +60 C. Hot air welding Hot air welding is used for production of internal seams for balloons of KOLIBRI inflatable boats and RIBs. This technology ensures quick and uniform heating of welded materials along their length. As a result, these are durable, hermetic seams resistant to increased load and temperature changes. Weld joining Welds are joined with additional reinforcement from external and internal sides. KOLIBRI Boat Manufacturing Company is considered to be one of the leading Ukrainian manufacturer of the small crafts in Europe since 199. KOLIBRI Boat Manufacturing Company consists of R&D Department, modern boatbuilding factories, which efficiency is more than 70000 pcs per year, production company ROTOFORM, which produces products using rotomolding technology and plastics high-pressure molding. The products of KOLIBRI BMC are produced in accordance with the ISO/CD 618 standard and are being constructed in accordance with Directive 01//EU. Products of KOLIBRI: inflatable boats, RIB with aluminum hull, aluminum crafts, plastic boats, kayaks, pedal boats for water recreation and professional operation. HFAC (high-frequency alternating current) welding Main units, joints, additional equipment and accessories of KOLIBRI inflatable boats are welded on HFAC plants with placement of KOLIBRI logo. Technological process is operated by computer and is currently the most up-to-date method of PVC fabric joining. Hermetic compartments in balloons In accordance with the requirements of the «Regulations of classification and construction of small-size water crafts» (Ukraine) and Directives 01/ / EU to ensure safety of exploitation of small-size boats, tubes of inflatable boats «KOLIBRI» are equipped with bulkheads, separating the boat into to hermetic compartments (depending on the model). To leveling off the pressure in all compartments of inflatable balloon bulkheads have a cone shape. KOLIBRI Boat Manufacturing Company provides -year warranty on inflatable and plastic boats, kayaks, RIBs, and 1-year warranty on optional equipment and accessories of own production. There is the own Service center guided by the principle of maximum help and assistance to the customer with its water craft during its warranty period as well as upon its expiration. We keep in touch with KOLIBRI boats owners at the biggest national boating forums the buyer of our boats knows that we are always there, always in reach, and always ready to help. If you are a fisherman or a hunter, sportsman or amateur of active rest on water, KOLIBRI boat is your best friend and irreplaceable assistant. Gluing Seams, fittings, accessories and additional equipment of KOLIBRI inflatable boats are fixed using double-component industrial glue. Gluing technology using high temperatures and pressure equipment, applied at KOLIBRI Boat manufacturing company factories, is guaranteed durable and reliable glue joint. Movable thwarts Inflatable rowing boats «Super light» and «Profi» as well as all inflatable motor boats KOLIBRI are supplied with adjustable thwarts as a standard equipment. The main advantage of such fixing is smooth, stepless movement of thwarts along the boat length that lets you install the thwarts in the most suitable place.
INFLATABLE ROWING BOATS Super light series Standard set: К-190 К-10 К-0 boat oars thwart pump repair set owner s manual carrying bag Basic color: green 190x10 10x10 0x10 8 8 8 10,9 11, 11,9 100 110 10 1 1 1 - - - 74xx0 74xx0 74xx0 KOLIBRI Boat Manufacturing Company produces three series of inflatable rowing boats. Fabric lightened five-layer PVC fabric 60-70 g/m² Super light series compact one-seat boats, Standard and Profi series full-size inflatable boats with passenger capacity (depending on the model) up to persons and possibility of installation of outboard motor. The main advantages on KOLIBRI rowing boats are their exceptional reliability and durability due to utilization of five-layer PVC fabric with density of 90 g/m² for Standard and Profi series and 60-70 g/m² for Super light series, light weight and small size in transportation state, quick boat assembling, thwarts (for Super light and Profi series), welding of main units on HFAC equipment, factory-mounted hinged transom fixture (for Standard and Profi series), three types of soles sole-carpet, sole-book, air-deck, wide range of KOLIBRI original accessories and additional equipment. High-quality and durable, reliable and unpretentious in use, inflatable boat KOLIBRI is your true friend on water! Oars lightened oar blades 4 Original accessories and optional equipment. Page 1 Seams HFAC welding safety vest
Standard series Profi series K-0T(S) K-40T(S) K-60T(S) K-80T(S) K-80CT(S) K-00CT(S) Standard set: K-0T(S) K-70T(S) K-90T(S) boat with fixings for hinged transom oars thwarts sole-carpet pump repair set owner s manual carrying bag 0х10 4 1, 160 1, 7х4х0 40х10 4 14,6 16, 8х4х0 61х10 4 0,4 0, 100х47х 80х10 4 0,88 0 100х47х 80х140 8 8,1 40, 100хх 00х140 8 0 40, 100хх Basic color: green light-grey Additional colors: camouflage orange dark-grey dark-blue 48х10 70х10 90х10 4 4 4 0,4 1,,6 10 40 60,, 100х47х 100х47х 100х47х Fabric five-layer PVC fabric 70-90 g/m² Seams HFAC welding Seams HFAC welding sole-carpet sole-book air-deck sole-carpet sole-book air-deck Hinged transom built-in fixing Oars full-size blades Hinged transom built-in fixing Oars full-size blades 6 Original accessories and optional equipment. page 1 7
INFLATABLE MOTOR BOATS Standard series КМ-00 КМ-4 КМ-60 КМ-80 КМ-00 КМ-0 00х140 8 0 0 1, 100хх 4х140 8 60 100хх 60х140 8 70 100хх 80х148 9 7 0 100хх 00х160 4 0 410 8 110х7х40 0х160 4 1 480 4 1 110х6х0 KOLIBRI Boat manufacturing company produces four series of inflatable motor boats. Standard series are inflatable boats with fixed transom, thwarts, passenger capacity up to four persons and possibility of installation of outboard motor with power up to 1 hp. Boats are produced from five-layer PVC fabric with density of 90 g/m². Depending on conditions of use you can choose one of the soles: sole-carpet, sole-book, air-deck. Light series is lightened motor boats that produced from five-layer PVC fabric with density of 90 g/m² and equipped with sole-book made of 9 mm waterproof plywood. Profi series is full-size keel inflatable boats produced from highly-durable PVC fabric with density of 1100 g/m² resistant to cuts and punctures, with rigid 1 mm sole (plywood or aluminum), reinforced by aluminum stringers, passenger capacity of up to persons and possibility of installation of outboard motor with power up to 0 hp. SL series is full-size keel inflatable boats produced from highly-durable PVC fabric with density of 1100 g/m² with smoothly narrowing hull with hemispherical stern balloons and cockpit extended by 17-0 cm compared to traditionally shaped boats, rigid 1 mm sole (plywood or aluminum), reinforced by aluminum stringers. Depending on the boat model balloons have up to five independent hermetic compartments and diameter of up to 49 cm which provides perfect stability, great seaworthiness and increased safety when using the boat on open water even under serious seaway. The main advantages of KOLIBRI motor boats are: exceptionally durable PVC fabric highly resistant to cuts and punctures, welding of main units on HFAC plants, thwarts, monolithic support of transom fixture, plywood or fiberglass composite transom, full-size oars, wide range of original KOLIBRI accessories and additional equipment. Multi-day family trip or weekend tour, light or heavily loaded, the battle with waves or quiet glide on the glassy water inflatable motor boat KOLIBRI is a boat that will never let you down! Transom fixture monolitic support Transom wheels plastic, lightened sole-carpet sole-book air-deck
Light series Profi series Standard set: boat with fixed transom bow roller with anchor rope fixing sole-book oars with adjustable clutch thwarts pump repair set owner s manual boat carrying bag sole bag КМ-80DL КМ-00DL КМ-0DL KM-4D KM-60D KM-80D КМ-00D КМ-0D КМ-60D Basic color: green light-grey Additional colors: camouflage orange dark-grey dark-blue 80х160 0х160 0х160 4 4 4 4+1 4+1 4+1 4 47 49 0 400 470 4 10 1 100хх 110х7х40 110х6х0 4х140 8 +1 7 60 100хх 60х14 8 +1 4 70 100хх 8х148 9 +1 48 0 100хх 0х160 4 +1 400 10 100х7х40 0х160 4 +1 8 470 4 1 110х6х0 60х160 4 +1 6, 60 0 110х6х0 Soft cover for thwart Oar clutch collet Transom waterproof plywood or fiberglass composite collet Oar clutch plywood aluminum Transom wheels plastic, lightened -book, consists of several parts made of waterproof plywood (9 mm) joined with PVC stripes Transom waterproof plywood or fiberglass composite reinforced by aluminum stringers 10 Original accessories and optional equipment. Page 1 Transom wheels plastic, lightened Original accessories and optional equipment. Page 1 11
SL series ACCESSORIES Standard set: boat with fixed transom bow roller with anchor rope fixing plywood sole reinforced by aluminum stringers oars with adjustable collet connector thwarts pump repair set owner s manual boat carrying bag sole bag Basic color: green light-grey Additional colors: camouflage orange dark-grey dark-blue КМ-0DSL КМ-60DSL КМ-400DSL КМ-40DSL 0х160 70х160 408х180 4 4 49 4+1 4+1 4+1 7,1 61,4 88 470 60 660 4 6 1 0 110х6х0 110х6х0 10х70х 40х190 49 4+1 101 890 6 10х70х MPN 1.007. - 1.010.47 MPN 1.107. - 1.110.47 Under-seat bag MPN.001. -.006.47 Bow storage bag Oar clutch collet Soft cover for thwart MPN.01.0. -.19.0.47 Protective canopy MPN.101.0.1.106.0.47 Bimini Top MPN 4.001.7-1.00.0 Safety vest with a storage bag MPN 1.011.0.6 Hinged transom + fastening set MPN 1.01.0.00 Universal MPN 1.016.6 Transom wheels, plastic plywood aluminum Transom waterproof plywood or fiberglass composite MPN 11.00.6 MPN 1.00.6 Holder for spinning rods MPN 1.0.0 Inflatable chair reinforced by aluminum stringers 1 See more original accessories and optional equipment on www.kolibriboats.com 1
KOLIBRI PONTOON BOATS P-00F Fishing P-00S Standard P-600F Fishing P-600S Standard P-700S Standard KOLIBRI PONTOON BOATS. Technical specifications Модель P-00F Fishing P-00S Standard P-600F Fishing P-600S Standard P-700S Standard Length overall Width overall Length inside m m m,1, 4,7,1, 4,7 6,1,,6 6,1,,6 7,1, 6,6 Width inside Passengers capacity m persons, 6, 6, 8, 8, 10 Loading capacity kg 740 700 80 70 860 Bare Boat weight Engine max Engine weight max Body type kg hp kg 600 60 10 707 60 70 80 800 80 10 170 170 Catamaran type, with hermetic chambers 91 11 170 Number of chambers pcs 6 (х) 6 (х) 8 (х4) 8 (х4) 8 (х4) Bottom type Aluminium pontoons EN AW08-H111 14 Boat design category CE 01//EU С С С С С Spacious deck with fishing area, equipped with rotating and folding seats, rod-holders and other appliances for successful fishing, as well as seating area with a re table with cup holders KOLIBRI PONTOON BOATS multi-hull catamaran-type boat designed for fishing, hunting and recreation on the water. Each hull of pontoon boats has subdivision for - (depends on model) watertight compartments which provides stability and high level of safety. The deck of the boat made of aluminum profiles with antiskid surface and is easy for cleaning and gives additional strength to the boat. Deck size is up to 8.0x. m with fences made of aluminum profile, equipped with comfortable weather-proof furniture and accessories for fishing and recreation on the water. The manufacturer offers standard equipment set and various options for color design of the fences and upholstery, wide range of steering consoles with steering wheels, engine remote controls, control panels, windshields, captain s seats, fuel systems with fuel tanks of different capacities, a kitchen unit with sink and refrigerator, a Bimini Tops and many more. Boat hulls are made of marine grade aluminum alloy EN AW08-H111. Аt the stern of the hulls very convenient built-in steps KOLIBRI Boat Manufacturing Company, 018. All right reserved Trademarks and graphic images of logos of KOLIBRI, KOLIBRI Rigid & Inflatable Boats are owned by KOLIBRI Boat Manufacturing Company. Photoes, images, texts, information data, as well as the design of this catalogue are the exclusive property of KOLIBRI BMC, and cannot be used either together or separately without the written permission of the copyright holder. This print edition is for informational purposes only and under no circumstances is a public offer. KOLIBRI BMC the right to make alterations in the design, construction and component parts of the products without additional notification. All technical data are subject to change without notice. The products details and specifications may be changed from specified herein. KOLIBRI BMC is not responsible for any spelling mistakes and/or errors in the printing process of this Catalogue. Appearance, colour and configuration of products may vary slightly from those shown in the pictures published. For current information concerning the configuration and cost of the products, you are kindly requested to contact company dealers or directly the manufacturer. Welded aluminum steering console with forward seat and locker