EX5600-6 SPECIFICATIONS BACKHOE BUCKET CAPACITY: (SAE HEAPED): 34.0 m³ (44.5 CU. YD.) SHOVEL BUCKET CAPACITY (HEAPED): SAE (2:1): 27.0 29.0 m 3 (35.3 38.0 CU. YD.) OPERATING WEIGHT: BACKHOE: 537 000 KG (1,184,000 LB.) LOADING SHOVEL: 533 000 KG (1,175,000 LB.) RATED POWER: 2 X 1119 KW (2 X 1,500 HP)
EX5600-6 DIMENSIONS 10 080 mm (33' 1") Rear-end swing radius 7950 mm (26' 1") Rear-end length 7820 mm (25' 8") 8600 mm (28' 3") 1100 mm (3' 7") 1400 mm (55") 3000 mm (9' 10") 6000 mm (19' 8") 7400 mm (24' 3") 2730 mm (9') 7000 mm (23') 9350 mm (30' 8") STANDARD EQUIPMENT Engine 140-amp alternator Heavy-duty-type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Water filter Radiator reserve tank Fan guard Isolation-mounted engine Pre-lubrication system Auto-idle system Emergency engine stop system Hydraulic System Engine-Pump (EP) control system Optimum Hydraulic System (OHS) Fuel-Saving Pump System (FPS) Hydraulic drive cooling-fan system Forced-lubrication and forced-cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer Cab OPG top guard level ll (ISO) Fluid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Front windshield washer Adjustable reclining seat with air suspension Footrest Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Seat belt Hot and cool box Storage spaces Floor mat Air conditioner with defroster Rearview mirror Evacuation hammer Emergency-escape device Trainer's seat Pilot control shutoff lever Monitor Systems Meters: Hour meter Fuel gauge Hydraulic oil temperature gauge Engine coolant temperature gauge Tachometer Engine oil pressure gauge Engine oil temperature gauge Battery voltage gauge Ambient temperature Pilot lamps (green): Pre-lubrication system Auto-idle Travel mode Warning lamps (red): Alternator Engine stop Coolant overheat Hydraulic oil level Auto-lubrication system Fast-filling Tension Electric lever Emergency engine stop Top valve Engine overrun Coolant level Engine oil pressure Pump transmission oil level indicator Warning lamp (yellow): Exhaust temperature Fuel temperature Engine warning Hydraulic oil overheat Stairway position Electrical equipment box Pump contamination Air cleaner restriction Alarm buzzers: Overheat Engine coolant pressure Engine coolant level Fuel temperature Engine oil pressure Engine oil temperature Air intake manifold temperature Crankcase pressure Pump transmission oil level Hydraulic oil level Stop valve close Fast-filling system panel position Stairway position Electric lever fault Data Logging System Data-Logging Unit (DLU) continuously records the performance of the engine and the hydraulic system; data can be downloaded by PC Satellite data-transmitting system Lights 12 high-brightness working lights 3 entrance lights 8 maintenance-room lights Upperstructure Lockable machine covers 48 700-kg (107,365-lb.) counterweight Hydraulic-drive grease gun with hose reel Folding stairs with wide steps Swing parking brake Undercarriage Travel parking brake Travel motion alarm device Travel motor guard (backhoe only) Hydraulic track adjuster with N2 gas accumulator and relief valve 1400-mm (55-in.) triple-grouser shoes Miscellaneous Standard tool kit Stairs and handrails (ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 12-volt power terminal board Stop valve for transport and reassembly Lincoln auto-lubrication system 4 color monitor cameras (2 front and 2 rear) Engine oil reserve system Hydraulic oil suction pump Fast-Filling System Fast-filling couplers Wiggins fast-filling system for fuel, hydraulic oil, coolant, swing-device oil, pump transmission oil, engine oil, and grease OPTIONAL EQUIPMENT Cold-weather package Travel device guard Travel motor guard 2
EX5600-6 SPECIFICATIONS ENGINE Make Cummins Model QSKTA50C Type Water-cooled, 4-cycle, 16-cylinder Aspiration Turbocharged and aftercooled, direct-injection chamber-type diesel engine Gross power @ 1800 min -1 (rpm) (SAE J1995) 1119 kw (1,500 hp) X 2 Net power @ 1800 min -1 (rpm) 1069 kw (1,434 hp) X 2 Maximum torque @ 1400 min -1 (rpm) 6570 N m / 670 kgf m (4,846 lbf ft.) X 2 Piston displacement 50 L (3,051 cu. in.) X 2 Bore and stroke 159 mm X 159 mm (6.3 in. X 6.3 in.) Starting system 24-volt electric motor Batteries 6 X 12 V, 6 X 220 AH Cold starting Ether aided HYDRAULIC SYSTEM Hitachi s Electronic Total Control System (ETS) achieves maximum job efficiency by reducing fuel consumption and noise levels, and maximizes productivity through the optimization of engine-pump functions with excellent controllability, increasing operator comfort. Engine-Pump (E-P) Control Main pumps regulated by electric engine speed-sensing control system. Optimum Hydraulic System (OHS) 12 main pumps and 6-valve system enable both independent and combined operations of all functions. Fuel-Saving Pump System (FPS) Minimizes energy loss with superior performance and fine control. Additional Features Auto-idle system saves fuel and reduces noise. Hydraulic-drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump-drive system. Main Pumps 8 variable-displacement, axial-piston pumps for front attachment and travel. Maximum oil flow 8 X 375 L/min (8 X 99.06 U.S. gal./min.) Main/Swing Pumps 4 variable-displacement, axial-piston pumps for front attachment and swing. Maximum oil flow 4 X 425 L/min ( 4 X 112.3 U.S. gal./min.) Pilot Pump 2-gear pump Maximum oil flow 108 L/min (28.5 U.S. gal./min.) X 2 Relief Valve Settings Implement circuit Swing circuit Travel circuit Pilot circuit 29.4 MPa / 300 kgf/cm² (4,263 psi) 24.5 MPa / 250 kgf/cm² (3,553 psi) 29.4 MPa / 300 kgf/cm² (4,263 psi) 3.9 MPa / 40 kgf/cm² (566 psi) Hydraulic Cylinders High-strength piston rods and tubes adopted for durability. Cylinder-cushion mechanisms provided for boom, arm, bucket, and dump cylinders. Loading shovel bucket cylinders provided with protector. Cylinder Dimensions (Backhoe) Cylinder Dimensions (Loading Shovel) Quantity Bore Rod Diameter Quantity Bore Rod Diameter BE-boom 2 420 mm (16.5 in.) 300 mm (11.8 in.) Boom 2 420 mm (16.5 in.) 300 mm (11.8 in.) BE-arm 1 360 mm (14.2 in.) 260 mm (10.2 in.) Arm 1 360 mm (14.2 in.) 260 mm (10.2 in.) Bucket 1 310 mm (12.2 in.) 230 mm (9.1 in.) Bucket 2 340 mm (13.4 in.) 250 mm (9.8 in.) Dump 2 280 mm (11 in.) 160 mm (6.3 in.) Level 1 420 mm (16.5 in.) 300 mm (11.8 in.) Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for longer life of hydraulic components and protection against oil contamination. Filters are centrally arranged for facilitated maintenance. Quantity Specifications Full-flow filter 6 10 μm High-pressure strainer (in main and swing-pump delivery line) 12 80 mesh Drain filter (for all plunger-type pumps and motors) 1 10 μm Bypass filter 1 5 μm Pilot filter 2 10 μm 3
EX5600-6 SPECIFICATIONS CONTROLS Two Implement Levers Electric joystick-control levers: right lever for boom and bucket control; left lever for swing and arm control. For loading shovel, two pedals open and close bottom-dump bucket. Two Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. UPPERSTRUCTURE Revolving Frame Deep, fully reinforced box section. Heavy-gauge steel plates for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to engines, hydraulic, and electrical components. ISO-compliant stairs and handrails. Sidewalks and stairs include skid-resistant plates. SWING MECHANISM 4 high-torque, axial-piston motors with 2-stage planetary gear bathed in oil. Swing circle with dirt seals features heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Spring-set/hydraulic-released disc-type parking brake is manually releasable. Swing speed 3.3 min -1 (rpm) OPERATOR S CAb Sturdy cab with OPG top guard level II (ISO) helps protect operator from falling objects. Independent, pressurized, 1800 mm (5 ft. 11 in.) wide, 2150 mm (7 ft. 1 in.) high, roomy 7.5 m³ (264.8 cu. ft.) cab with tinted-glass windows features all-round visibility. Air-suspension-type, fully adjustable reclining seat with armrests movable with or without front and swing control levers by slide. Instruments and control panel are within easy reach of operator. Three air-conditioner system. Noise level 75 db(a) in the cab at maximum engine speed under no-load conditionn Eye-level height 7640 mm (25 ft. 1 in.) UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame ensures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials for toughness. Lifetime-lubricated induction-hardened track rollers, idlers, and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster includes N2 gas accumulator with relief valve. Track adjuster protects against abnormal tension. Travel motion alarm device. Shovel-Type Undercarriage Triple-grouser track shoes of induction-hardened cast steel. Shoe width 1400 mm (55 in.) Number of Rollers and Shoes (each side) Upper rollers 3 Lower rollers 7 Track shoes 39 Travel Device Each track driven by high-torque, axial-piston motors, allowing counter rotation of tracks. 2-stage planetary gear plus spur-gear-reduction device. Dual-support-type traction device. Spring-set/hydraulic-released disc-type parking brake is manually releasable. Travel speeds High: 0 2.3 km/h (0 1.43 mph) Low: 0 1.6 km/h (0.99 mph) Maximum traction force 2230 kn / 227 000 kgf (501,324 lbf) Gradeability 58% (30-deg.) maximum WEIGHTS AND GROUND PRESSURE Loading Shovel: Equipped with 29.0-m 3 (38.0-cu. yd.) (SAE heaped) bottom-dump bucket. Shoe Type Shoe Width Operating Weight Ground Pressure Triple Grousers 1400 mm (55 in.) 533 000 kg (1,175,000 lb.) 234 kpa / 2.39 kgf/cm³ (33.9 psi) Backhoe: Equipped with 10.6-m (34 ft.-9 in.) BE-boom, 5.3-m (17 ft.-5 in.) BE-arm, and 34.0-m³ (44.5-cu. yd.) (SAE heaped) bucket. Shoe Type Shoe Width Operating Weight Ground Pressure Triple Grousers 1400 mm (55 in.) 537 000 kg (1,184,000 lb.) 236 kpa / 2.41 kgf/cm³ (34.2 psi) 4
backhoe CONTROL LAYOUT 17 4 10 3 2 7 1 8 9 6 5 11 12 14 15 16 1. Left Console 2. Left Control Lever/Horn Switch 3. Left Travel Pedal 4. Left Travel Lever 5. Right Travel Lever 6. Right Travel Pedal 7. Right Control Lever/Horn Switch 8. Right Console 9. Operator's Seat 10. Bucket-Close Pedal (for loading shovel) 11. Bucket-Open Pedal (for loading shovel) 12. Pilot Control Shutoff Lever 13. Rear Console 14. Emergency Engine-Stop Switch 15. Engine Speed-Control Dial 16. Key Switch 17. Monitor Display 13 SERVICE REFILL CAPACITIES Liters U.S. Gallons Imperial Gallons Fuel Tank 11 300 2,985 2,486 Engine Coolant 2 X 476 2 X 126 2 X 105 Engine Oil Oil Pan 2 X 150 2 X 39.6 2 X 33 Engine Oil Reserve Tank 2 X 205 2 X 54.2 2 X 45.1 Pump Drive 2 X 29 2 X 7.6 2 X 6.4 Swing Device (four units) 4 X 84 4 X 22 4 X 18.5 Travel Final Device (two units) 2 X 340 2 X 90 2 X 74.8 Hydraulic System 6200 1,640 1,360 Hydraulic Tank 2200 581 484 DECK MACHINERY LAYOUT 11 26 12 13 13 16 10 10 5 11 4 3 18 9 13 8 6 14 13 8 9 1 15 4 3 18 5 24 23 1 17 21 24 19 7 2 22 25 20 25 17 21 2 22 23 1. Diesel Engine X 2 2. Engine Radiator X 2 3. Pump-Drive Unit X 2 4. Hydraulic Pump X 12 5. Engine-Pump Bulkhead X 2 6. Hydraulic Tank 7. Fuel Tank 8. Control Valve X 6 9. High-Pressure Strainer X 12 10. Hydraulic Oil Cooler X 2 11. Hydraulic Oil Cooling-Fan Motor X 2 12. Lubricator 13. Swing Device X 4 14. Center Joint 15. Battery Unit 16. Cab 17. Air Filter (outer/inner) X 4 18. Muffler X 4 19. Folding Stairs 20. Fuel Cooler 21. Reserve Tank (coolant) X 2 22. LTA Radiator X 2 23. Transmission Pump Oil Cooler X 2 24. Reserve Tank (engine oil) X 2 25. Fuel Filter (water separator) X 2 26. Ladder 5
EX5600-6 SPECIFICATIONS LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile-strength steel full-box section design. Efficient, automatic level crowing achieved by one-lever control as parallel-link mechanism keeps bucket digging angle constant, and level-cylinder circuit maintains bucket height (auto-leveling crowd mechanism). Feet 65 60 55 50 45 40 35 30 25 20 15 10 5 0 5 10 15 20 25 Meter 20 18 16 14 12 10 8 6 4 2 0 2 4 EH4000ACII 6 20 18 16 14 12 10 8 6 4 2 0 65 60 55 50 45 40 35 30 25 20 15 10 5 0 Ground Line Meter Feet WORKING RANGES bucket CAPACITY Bucket capacity (heaped) 27.0 m 3 (35.3 cu. yd.) 29.0 m 3 (38.0 cu. yd.) A. Minimum digging distance 6150 mm (20 ft. 2 in.) 6400 mm (21 ft.) B. Minimum level crowding distance 9800 mm (32 ft. 2 in.) 10 050 mm (33 ft.) C. Level crowding distance 5550 mm (18 ft. 3 in.) 5350 mm (17 ft. 7 in.) D. Maximum digging reach 16 600 mm (54 ft. 6 in.) 17 000 mm (55 ft. 9 in.) E. Maximum cutting height 18 900 mm (62 ft.) 19 200 mm (63 ft.) E'. Maximum dumping height 13 100 mm (43 ft.) 13 100 mm (43 ft.) F. Maximum digging depth 4550 mm (14 ft. 11 in.) 4800 mm (15 ft. 9 in.) G. Working radius at max. dumping height 8900 mm (29 ft. 2 in.) 8900 mm (29 ft. 2 in.) H. Maximum bucket opening width 2700 mm (8 ft. 10 in.) 2700 mm (8 ft. 10 in.) Arm crowding force on ground 1570 kn / 160 000 kgf (352,950 lbf) 1520 kn / 155 000 kgf (341,595 lbf) Bucket digging force 1710 kn / 174 000 kgf (384,423 lbf) 1590 kn / 162 000 kgf (357,446 lbf) bucket (SAE HEAPED 2:1) Capacity Width Number of Teeth Weight Type Material Density 27.0 m³ (35.3 cu. yd.) 4700 mm (15 ft. 5 in.) 6 43 300 kg (95,460 lb.) Bottom-dump type, general purpose 1900 kg/m³ (3,202 lb./cu. yd.) or less 29.0 m³ (38.0 cu. yd.) 4700 mm (15 ft. 5 in.) 6 44 300 kg (97,664 lb.) Bottom-dump type, general purpose 1800 kg/m³ (3,033 lb./cu. yd.) or less Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear-protection system for your application. Please do not use buckets without proper wear protection for your application. 6
EX5600-6 SPECIFICATIONS backhoe ATTACHMENT Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Feet Meter 65 20 60 55 50 45 18 16 14 E 40 12 35 30 25 10 8 20 6 15 10 5 4 2 D 0 5 10 15 0 2 4 F EH4000ACII G Ground Line 20 6 25 8 8 30 24 22 20 18 16 14 12 10 8 6 4 2 0 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 Meter Feet WORKING RANGES BE-boom length 10.1 m (33 ft. 2 in.) BE-arm length 5.0 m (16 ft. 5 in.) A Maximum digging reach 20 200 mm (66 ft. 3 in.) A' Maximum digging reach (on ground) 19 400 mm (63 ft. 8 in.) B Maximum digging depth 8800 mm (28 ft. 11 in.) B' Maximum digging depth (8-ft. level) 8700 mm (28 ft. 7 in.) C Maximum cutting height 19 700 mm (64 ft. 8 in.) D Maximum dumping height 12 200 mm (40 ft.) D' Minimum dumping height 5200 mm (17 ft. 1 in.) E Minimum swing radius 9900 mm (32 ft. 6 in.) F Maximum vertical wall 4300 mm (14 ft. 1 in.) G Minimum level crowding distance 7200 mm (23 ft. 8 in.) Bucket digging force ISO 1480 kn / 151 000 kgf (332,717 lbf) SAE 1370 kn / 140 000 kgf (307,988 lbf) Arm crowd force ISO 1300 kn / 133 000 kgf (292,252 lbf) SAE 1280 kn / 131 000 kgf (287,755 lbf) bucket (SAE HEAPED 2:1) Capacity Width with Side Cutters Number of Teeth Weight Type Material Density (SAE Heaped) 34.0 m 3 (44.5 cu. yd.) 4630 mm (15 ft. 2 in.) 5 32 700 kg (72,091 lb.) General-purpose bucket 1800 kg/m³ (3,033 lb./cu. yd.) Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear-protection system for your application. Please do not use buckets without proper wear protection for your application. 7
EX5600-6 SHIPPING INFORMATION EX5600-6 components are designed for ease of transportation and on-site assembly. Components can be assembled without welding. UPPERSTRUCTURE Cab Weight: 1750 kg (3,858 lb.) Mainframe assembly Weight: 48 300 kg (106,483 lb.) Fuel cooler unit Weight: 53 kg (117 lb.) Ladder Weight: 846 kg (1,865 lb.) 2830 mm (9 ft. 3 in.) 2500 mm (8 ft. 2 in.) 3240 mm (10 ft. 8 in.) 10 390 mm (34 ft. 1 in.) 825 mm (33 in.) 398 mm (16 in.) 2130 mm (7 ft.) Width: 1880 mm (6 ft. 2 in.) Valve assembly Weight: 7540 kg (16,623 lb.) Fuel tank Weight: 5210 kg (11,486 lb.) Hydraulic oil tank Weight: 6730 kg (14,837 lb.) Mufflers and air cleaners (left / right) Weight: 871 kg (1,920 lb.) X 2 Water tanks (left / right) Weight: 177 kg (390 lb.) X 2 3470 mm (11 ft. 4 in.) 2280 mm (7 ft. 6 in.) 1300 mm (4 ft. 3 in.) 3150 mm (10 ft. 4 in.) Width: 3090 mm (10 ft. 2 in.) Engine unit (left) Weight: 26 500 kg (58,422 lb.) 9240 mm (30 ft. 4 in.) Engine unit (right) Weight: 27 300 kg (60,186 lb.) 9020 mm (29 ft. 7 in.) 3410 mm (11 ft. 2 in.) 3440 mm (11 ft. 2 in.) 2520 mm (8 ft. 3 in.) 3310 mm (10 ft. 11 in.) 3380 mm (11 ft. 1 in.) 2010 mm (6 ft. 7 in.) 3590 mm (11 ft. 10 in.) Width: 3500 mm (11 ft. 6 in.) Width: 402 mm (16 in.) Width: 1100 mm (3 ft. 7 in.) 743 mm (29 in.) 1142 mm (3 ft. 9 in.) Width: 2400 mm (7 ft. 11 in.) Width: 2310 mm (7 ft. 7 in.) Width: 1350 mm (4 ft. 5 in.) Width: 735 mm (29 in.) Width: 2600 mm (8 ft. 6 in.) Width: 2400 mm (7 ft. 10 in.) 8
UPPERSTRUCTURE Box Weight: 953 kg (2,101 lb.) Weight: 75 kg (165 lb.) Counterweight (left) Weight: 24 400 kg (53,973 lb.) Counterweight (right) Weight: 23 800 kg (52,470 lb.) 5240 mm (17 ft. 2 in.) 5240 mm (17 ft. 2 in.) 1780 mm (5 ft. 10 in.) 1810 mm (5 ft. 11 in.) 1370 mm (4 ft. 5 in.) 1014 mm 1420 mm (4 ft. 8 in.) 1420 mm (4 ft. 8 in.) Width: 2000 mm (6 ft. 7 in.) Width: 808 mm (32 in.) Width: 1540 mm (5 ft. 1 in.) Width: 1540 mm (5 ft. 1 in.) Weight: 20 kg (44 lb.) Weight: 25 kg (55 lb.) Weight: 25 kg (55 lb.) Weight: 20 kg (44 lb.) 2180 mm (7 ft. 2 in.) 2460 mm (8 ft. 1 in.) 2460 mm (8 ft. 1 in.) 2180 mm (7 ft. 2 in.) 981 mm (3 ft. 3 in.) 981 mm (3 ft. 3 in.) 981 mm (3 ft. 3 in.) 981 mm (3 ft. 3 in.) Width: 500 mm (20 in.) Width: 392 mm (15 in.) Width: 392 mm (15 in.) Width: 500 mm (20 in.) Cover Weight: 18 kg (40 lb.) Cover Weight: 18 kg (40 lb.) Cover Weight: 11 kg (24 lb.) Cover Weight: 5 kg (11 lb.) Cover Weight: 5 kg (11 lb.) 611 mm (24 in.) 611 mm (24 in.) 510 mm (20 in.) 230 mm (9 in.) 230 mm (9 in.) 905 mm (3 ft.) 940 mm (3 ft. 1 in.) 870 mm (34 in.) 1370 mm (4 ft. 6 in.) 1370 mm (4 ft. 6 in.) Width: 30 mm (1 in.) Width: 30 mm (1 in.) Width: 30 mm (1 in.) Width: 30 mm (1 in.) Width: 30 mm (1 in.) Reserve tanks (left / right) Weight: 370 kg (816 lb.) X 2 Hydraulic oil pump assembly Weight: 54 kg (119 lb.) Weight: 21 kg (46 lb.) Weight: 19 kg (42 lb.) 1430 mm (4 ft. 8 in.) 885 mm (35 in.) 1110 mm (3 ft. 8 in.) 973 mm (3 ft. 2 in.) 573 mm (23 in.) 573 mm (23 in.) 1010 mm 601 mm (24 in.) Width: 508 mm (20 in.) Width: 635 mm (25 in.) Width: 36 mm (1 in.) Width: 136 mm (5 in.) 9
UPPERSTRUCTURE Weight: 15 kg (33 lb.) Weight: 15 kg (33 lb.) Weight: 8 kg (18 lb.) Weight: 9 kg (20 lb.) 970 mm (3 ft. 2 in.) 970 mm (3 ft. 2 in.) 560 mm (22 in.) 546 mm. (21 in.) 550 mm (22 in.) 550 mm (22 in.) 550 mm (22 in.) 605 mm (24 in.) Width: 40 mm (2 in.) Width: 40 mm (2 in.) Width: 40 mm (2 in.) Width: 131 mm (5 in.) Weight: 23 kg (51 lb.) Weight: 12 kg (27 lb.) Weight: 24 kg (53 lb.) Weight: 12 kg (27 lb.) Weight: 23 kg (51 lb.) 1310 mm (4 ft. 4 in.) 399 mm (16 in.) 905 mm (3 ft.) 254 mm (10 in.) 771 mm (30 in.) 992 mm (3 ft. 3 in.) 992 mm (3 ft. 3 in.) 1020 mm 1150 mm (3 ft. 9 in.) 1860 mm (6 ft. 1 in.) Width: 266 mm (10 in.) Width: 266 mm (10 in.) Width: 767 mm (30 in.) Width: 331 mm (13 in.) Width: 265 mm (10 in.) Weight: 17 kg (38 lb.) Weight: 15 kg (33 lb.) Weight: 28 kg (62 lb.) Weight: 16 kg (35 lb.) Weight: 36 kg (79 lb.) 1580 mm (5 ft. 2 in.) 1580 mm (5 ft. 2 in.) 1007 mm 1930 mm (6 ft. 4 in.) 1010 mm 1250 mm (4 ft. 1 in.) 1140 mm (3 ft. 9 in.) 2410 mm (7 ft. 11 in.) 1260 mm (4 ft. 1 in.) 580 mm (23 in.) Width: 348 mm (14 in.) Width: 322 mm (13 in.) Width: 223 mm (9 in.) Width: 55 mm (2 in.) Width: 267 mm (11 in.) Weight: 32 kg (71 lb.) Weight: 35 kg (77 lb.) Weight: 31 kg (68 lb.) Weight: 25 kg (55 lb.) 1140 mm (3 ft. 9 in.) 2410 mm (7 ft. 11 in.) 1140 mm (3 ft. 9 in.) 2510 mm (8 ft. 3 in.) 1010 mm 2150 mm (7 ft. 1 in.) 1010 mm 1880 mm (6 ft. 2 in.) Width: 267 mm (11 in.) Width: 435 mm (17 in.) Width: 394 mm (16 in.) Width: 260 mm (10 in.) 10
UPPERSTRUCTURE Weight: 40 kg (8 lb.) Weight: 290 kg (6 lb.) Guard Weight: 243 kg (5 lb.) Pipe Weight: 42 kg (93 lb.) 1010 mm 2410 mm (7 ft. 11 in.) 2060 mm (6 ft. 9 in.) 2210 mm (7 ft. 3 in.) 884 mm (35 in.) 290 mm (11 in.) 1100 mm (3 ft. 7 in.) 2000 mm (6 ft. 7 in.) Width: 282 mm (11 in.) Width: 881 mm (35 in.) Width: 695 mm (27 in.) Width: 290 mm (11 in.) Pipe Weight: 37 kg (82 lb.) Weight: 171 kg (377 lb.) Weight: 116 kg (256 lb.) Weight: 264 kg (582 lb.) Weight: 261 kg (575 lb.) 290 mm (11 in.) 903 mm (3 ft.) 2330 mm (7 ft. 8 in.) 1120 mm (3 ft. 8 in.) 1400 mm (4 ft. 7 in.) 2000 mm (6 ft. 7 in.) 2060 mm (6 ft. 9 in.) 2420 mm (7 ft. 11 in.) 2060 mm (6 ft. 9 in.) 2420 mm (7 ft. 11 in.) Width: 290 mm (11 in.) Width: 677 mm (27 in.) Width: 677 mm (27 in.) Width: 677 mm (27 in.) Width: 677 mm (27 in.) Weight: 223 kg (492 lb.) Weight: 36 kg (79 lb.) Weight: 30 kg (66 lb.) Weight: 28 kg (62 lb.) Weight: 23 kg (51 lb.) 2060 mm (6 ft. 9 in.) 1470 mm (4 ft. 10 in.) 1190 mm (3 ft. 11 in.) 2510 mm (8 ft. 3 in.) 2060 mm (6 ft. 9 in.) 1010 mm 1010 mm 1990 mm (6 ft. 6 in.) 1300 mm (4 ft. 3 in.) 1140 mm (3 ft. 9 in.) Width: 677 mm (27 in.) Width: 280 mm (11 in.) Width: 391 mm (15 in.) Width: 70 mm (3 in.) Width: 267 mm (11 in.) Weight: 258 kg (569 lb.) Weight: 286 kg (631 lb.) Weight: 120 kg (265 lb.) Weight: 171 kg (377 lb.) Cover Weight: 41 kg (90 lb.) 2060 mm (6 ft. 9 in.) 2350 mm (7 ft. 9 in.) 2060 mm (6 ft. 9 in.) 2420 mm (7 ft. 11 in.) 1400 mm (4 ft. 7 in.) 2000 mm (6 ft. 7 in.) 1120 mm (3 ft. 8 in.) 2330 mm (7 ft. 8 in.) 856 mm (34 in.) 1830 mm (6 ft.) Width: 682 mm (27 in.) Width: 677 mm (27 in.) Width: 797 mm (31 in.) Width: 677 mm (27 in.) Width: 462 mm (18 in.) 11
UPPERSTRUCTURE Weight: 17 kg (37 lb.) Weight: 18 kg (40 lb.) Weight: 18 kg (40 lb.) Weight: 31 kg (68 lb.) Guard Weight: 243 kg (536 lb.) 982 mm (3 ft. 3 in.) 1080 mm (3 ft. 6 in.) 1010 mm 1220 mm (4 ft.) 1000 mm (3 ft. 3 in.) 1290 mm (4 ft. 3 in.) 1140 mm (3 ft. 9 in.) 1730 mm (5 ft. 8 in.) 884 mm (35 in.) 2000 mm (6 ft. 7 in.) Width: 189 mm (7 in.) Width: 223 mm (9 in.) Width: 70 mm (3 in.) Width: 267 mm (11 in.) Width: 695 mm (27 in.) Weight: 67 kg (148 lb.) Weight: 96 kg (212 lb.) Weight: 112 kg (247 lb.) Weight: 78 kg (172 lb.) Weight: 85 kg (187 lb.) 1280 mm (4 ft. 2 in.) 1840 mm (6 ft. 1 in.) 1290 mm (4 ft. 3 in.) 1720 mm (5 ft. 8 in.) 1290 mm (4 ft. 3 in.) 1770 mm (5 ft. 9 in.) 1290 mm (4 ft. 3 in.) 1680 mm (5 ft. 6 in.) 1290 mm (4 ft. 3 in.) 1690 mm (5 ft. 7 in.) Width: 620 mm (24 in.) Width: 719 mm (28 in.) Width: 687 mm (27 in.) Width: 552 mm (22 in.) Width: 577 mm (23 in.) Weight: 21 kg (46 lb.) Weight: 5.8 kg (13 lb.) Bracket assembly Weight: 18 kg (40 lb.) Bracket assembly Weight: 18 kg (40 lb.) Cover Weight: 22 kg (49 lb.) Weight: 53 kg (117 lb.) 1120 mm (3 ft. 8 in.) 1590 mm (5 ft. 3 in.) 710 mm (28 in.) 1320 mm (4 ft. 4 in.) 1320 mm (4 ft. 4 in.) 1660 mm (5 ft. 5 in.) 781 mm (31 in.) 409 mm (16 in.) 180 mm (7 in.) 180 mm (7 in.) 240 mm (9 in.) 340 mm (13 in.) Width: 131 mm (5 in.) Width: 50 mm (2 in.) Width: 110 mm Width: 110 mm Width: 200 mm (8 in.) Width: 710 mm (28 in.) Cover Weight: 5.8 kg (13 lb.) Bolt assembly Weight: 31 kg (68 lb.) X 4 Bolt assembly Weight: 30 kg (66 lb.) X 10 Washers Weight: 0.8 kg (2 lb.) X 62 Bolts Weight: 11.2 kg (25 lb.) X 62 303 mm (12 in.) 700 mm (28 in.) 100 mm 1390 mm (4 ft. 7 in.) 115 mm (5 in.) 100 mm 1390 mm (4 ft. 7 in.) 100 mm 100 mm 545 mm (21 in.) 98 mm Width: 50 mm (2 in.) Width: 115 mm (5 in.) Width: 100 mm Width: 20 mm (1 in.) Width: 85 mm (3 in.) 12
UNDERCARRIAGE Track center-frame assembly Weight: 48 500 kg (106,924 lb.) Track side-frame assembly Weight: 46 000 kg (101,413 lb.) X 2 Stopper Weight: 17 kg (38 lb.) 2070 mm (6 ft. 9 in.) 3970 mm (13 ft.) 2180 mm (7 ft. 2 in.) 1060 mm (3 ft. 6 in.) 224 mm (9 in.) 8750 mm (28 ft. 8 in.) Width: 6120 mm (20 ft. 1 in.) Width: 2680 mm (8 ft. 10 in.) Width: 19 mm (1 in.) Spacers Weight: 7.1 kg (16 lb.) X 56 Bolts Weight: 10.1 kg (22 lb.) X 56 Spacers Weight: 18 kg (40 lb.) X 24 Bolts Weight: 14.6 kg (32 lb.) X 24 Track links Weight: 7950 kg (17,527 lb.) X 6 Track links Weight: 7160 kg (15,785 lb.) X 2 Support Weight: 114 kg (251 lb.) Ladder Weight: 32 kg (71 lb.) 395 mm (16 in.) 395 mm (16 in.) 4800 mm (15 ft. 9 in.) 125 mm (5 in.) 1600 mm (5 ft. 3 in.) 5470 mm (17 ft. 11 in.) 4940 mm (16 ft. 2 in.) 490 mm (19 in.) Width: 1400 mm (4 ft. 7 in.) Width: 1400 mm (4 ft. 7 in.) Width: 125 mm (5 in.) Width: 600 mm (24 in.) Motor cover Weight: 83 kg (183 lb.) Motor cover Weight: 69 kg (152 lb.) Motor cover Weight: 98 kg (216 lb.) Motor cover Weight: 72 kg (159 lb.) Motor cover Weight: 92 kg (203 lb.) 2370 mm (7 ft. 9 in.) 2370 mm (7 ft. 9 in.) 2370 mm (7 ft. 9 in.) 2370 mm (7 ft. 9 in.) 2370 mm (7 ft. 9 in.) 114 mm 110 mm 114 mm 110 mm 130 mm (5 in.) 360 mm (14 in.) 330 mm (13 in.) 540 mm (21 in.) Width: 114 mm Width: 95 mm Width: 114 mm Width: 95 mm 780 mm (31 in.) 660 mm (26 in.) 940 mm (3 ft. 1 in.) 660 mm (26 in.) 780 mm (31 in.) Width: 800 mm (31 in.) Width: 800 mm (31 in.) Width: 800 mm (31 in.) Width: 800 mm (31 in.) Width: 819 mm (32 in.) 13
backhoe ATTACHMENTS Bucket assembly 3 Capacity (SAE heaped): 29.0 m (38.0 cu. yd.) Weight: 32 700 kg (72,091 lb.) Arm assembly Weight: 37 300 kg (82,232 lb.) 6780 mm (22 ft. 3 in.) 3700 mm (12 ft. 2 in.) 3420 mm (11 ft. 2 in.) 4700 mm (15 ft. 5 in.) Width: 4260 mm (14 ft.) Width: 2350 mm (7 ft. 8 in.) Boom assembly Weight: 40 400 kg (89,067 lb.) s Weight : 19.4 kg (42.7 lb.) X 2 2140 mm (7 ft.) 3650 mm (11 ft. 11 in.) 817 mm (32 in.) Width: 144 mm (6 in.) 10 690 mm (35 ft.) Width: 2770 mm (8 ft. 10 in.) Boom cylinders Weight: 6880 kg (15,168 lb.) X 2 Arm cylinders Weight: 4690 kg (10,340 lb.) X 2 5770 mm (18 ft. 11 in.) 754 mm (30 in.) 4720 mm (15 ft. 6 in.) 685 mm (27 in.) Width: 640 mm (25 in.) Width: 865 mm (34 in.) Clamp assembly Weight: 49 kg (108 lb.) 185 mm (7 in.) 2500 mm (8 ft. 2 in.) Width: 100 mm 14
LOADER ATTACHMENTS Front bucket 3 Capacity (SAE heaped): 29.0 m (38.0 cu. yd.) Weight: 19 300 kg (42,549 lb.) Rear bucket Weight: 20 500 kg (45,195 lb.) s Weight: 28 kg (62 lb.) X 2 3370 mm (11 ft.) 1700 mm (5 ft. 7 in.) 3540 mm (11 ft. 7 in.) 4000 mm (13 ft. 1 in.) 867 mm (34 in.) 3340 mm (12 ft.) Width: 4780 mm (15 ft. 8 in.) Width: 4790 mm (15 ft. 9 in.) Width: 50 mm (2 in.) Arm assembly Weight: 21 300 kg (46,958 lb.) Boom assembly Weight: 36 400 kg (80,248 lb.) 5860 mm (19 ft. 3 in.) 8660 mm (28 ft. 5 in.) 2490 mm (8 ft. 2 in.) 2710 mm (8 ft. 11 in.) Width: 3210 mm (10 ft. 6 in.) Width: 3210 mm (10 ft. 6 in.) Arm cylinder Weight: 4320 kg (9,524 lb.) Boom cylinders Weight: 6600 kg (14,551 lb.) X 2 Level cylinder Weight: 3840 kg (8,466 lb.) 4500 mm (14 ft. 9 in.) 691 mm (27 in.) Dump cylinders Weight: 985 kg (2,172 lb.) X 2 Teeth Weight: 250 kg (551.1 lb.) X 6 1980 mm (6 ft. 6 in.) 440 mm (17 in.) 785 mm (31 in.) 5600 mm (18 ft. 4 in.) 640 mm (25 in.) 3240 mm (10 ft. 8 in.) Width: 790 mm (31 in.) Width: 640 mm (25 in.) Width: 1050 mm (3 ft. 5 in.) Bucket cylinders Weight: 4060 kg (8,951 lb.) X 2 565 mm (22 in.) 4910 mm (16 ft. 1 in.) 360 mm (14 in.) 680 mm (26 in.) Width: 980 mm (3 ft. 3 in.) Width: 443 mm (17 in.) Width: 380 mm (15 in.) Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. 15
Load Radius LIFTING CAPACITIES RATING OVER SIDE OR 360 DEGREES RATING OVER FRONT UNIT 1000 KG (1,000 Lb.) Load-Point Height Lifting Capacity Conditions BE-boom: 10.1 m (33 ft. 2 in.) BE-arm: 5.0 m (16 ft. 5 in.) Bucket SAE: 34.0 m³ (44.5 cu. yd.) Shoe: 1400 mm (55 in.) Load-Point Height 14 m (45 ft. 11 in.) 12 m (39 ft. 4 in.) 10 m (32 ft. 10 in.) 8 m (26 ft. 3 in.) 6 m (19 ft. 8 in.) 4 m (13 ft. 1 in.) 2 m (6 ft. 7 in.) 0 (Ground) 2 m ( 6 ft. 7 in.) 4 m ( 13 ft. 1 in.) LOAD RADIUS At Maximum Reach 8 m (26 ft. 3 in.) 10 m (32 ft. 10 in.) 12 m (39 ft. 4 in.) 14 m (45 ft. 11 in.) 16 m (52 ft. 6 in.) meter (ft. in.) *33.5 *33.5 *34.1 *20.8 17.9 m (*73.9) (*73.9) (*75.1) (*45.9) (58 ft. 9 in.) *40.9 *40.9 *34.2 *19.9 18.8 m (*90.2) (*90.2) (*75.4) (*43.9) (61 ft. 8 in.) *39.2 *39.2 *39.5 *39.5 *35.7 *19.8 19.2 m (*86.4) (*86.4) (*87.1) (*87.1) (*78.7) (*43.7) (63 ft.) *36.4 *36.4 *42.0 *42.0 *43.2 *43.2 *38.7 *20.3 19.4 m (*80.2) (*80.2) (*92.6) (*92.6) (*95.2) (*95.2) (*85.3) (*44.8) (63 ft. 8 in.) *55.2 *55.2 *51.5 *51.5 *48.4 *48.4 *43.5 *21.5 19.4 m (*122) (*122) (*113.5) (*113.5) (*106.7) (*106.7) (*95.9) (*47.4) (63 ft. 8 in.) *90.1 *90.1 *69.9 *69.9 *56.5 *56.5 48.6 *23.6 19.0 m (*199) (*199) (*154.1) (*154.1) (*124.6) (*124.6) (*107.1) (*52) (62 ft. 4 in.) *92.1 *92.1 *71.8 *71.8 *56.8 *56.8 *47.1 *26.7 18.4 m (*203) (*203) (*158.2) (*158.2) (*125.2) (*125.2) (*103.8) (*58.9) (60 ft. 4 in.) *88.9 *88.9 *136.5 *136.5 *53.2 *53.2 (*196) (*196) (*300.9) (*300.9) (*117.2) (*117.2) *99.5 *99.5 *79.9 *79.9 *61.8 *61.8 *44.2 *44.2 (*219.4) (*219.4) (*176.1) (*176.1) (*136.2) (*136.2) (*97.4) (*97.4) *91.6 *91.6 *78.2 *78.2 *63.8 *63.8 *47.1 *47.1 (*201.9) (*201.9) (*172.4) (*172.4) (*140.7) (*140.7) (*103.8) (*103.8) Notes: *Indicates load limited by hydraulic capacity. 1. Ratings are based on SAE J1097. 2. Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) loaded on the back of the bucket. www.hitachimining.com Specifications and design subject to change without notice. DKEX5600HT Litho in U.S.A. (11-10)