Independent Wellhead Products

New Products

Poster

Independent Wellhead Products Weir Independent Line Offers Comprehensive 1500 psi stack-up 3000 psi stack-up 5000 psi stack-up with dual ram BOP High-temp applications available 10K psi BOP offering available 6805 Silsbee Houston, TX 77033 (713)-644-3535 3912 Gilmore Avenue Bakersfield, CA 93308 (661)-325-5026

W2F/W2 Profile Tubing Head WK/WMK/WSK Tubing Head WR/WMR/WSR Tubing Head Model W92 Casing Head WX Tubing Head Belled Nipples Drilling Flanges Companion Flanges Wellhead Equipment

2M psi / 3M psi / 5M psi working pressure ratings available 4M psi / 6M psi / 7.5M psi test pressure ratings Slip flange available with 85M lb. maximum slip load High temperature elastomers available on request Unique V-Style rubber packing ring which energizes under pressure to provide superior seal in slip flange style Slip Flange With Stripper Rubber B1 Adapter With Mandrel B2 Adapter With Mandrel Seaboard W2F / W2 Profile Tubing Head Tubing head with bottom threaded or slip/weld on connection X flanged top connection Specifications W2F/W2 2M psi W2 3M psi W2 5M psi Working Pressure 2M psi 3M psi 5M psi Test Pressure 4M psi 6M psi 7.5M psi Max Load Limit 85M lb Contact Customer Service Hold Down Screws 4 4 4 or 6 Stud Nut Sizes 1 in. 8UN x 7 1/2 in. (12) 1 1/8 in. 8UN x 8 1/2 in. (12) 1 3/8 in. 8UN x 11 1/4 in. (12) Weight 220 lb 285 lb 500 lb Body Material Fabricated/Forged Forged Threaded Suspension Type Slip Flange Mandrel Bottom Thread 4 1/2 in. - 5 1/2 in. - 7 in Bottom Connection LTC Box or SOW Tubing Size 2 in. - 3 in. Side Outlets 2 in. LPO Minimum Bore 4.06 in. - 5.12 in. - 6.38 in. HEIGHT 18 1/2 in. WEIGHT 220 lb 285 lb 500 lb

1.5M psi working pressure 3M psi test pressure Maximum slip load: 65M lb Unique V-Style rubber packing ring which energizes under pressure to provide superior seal in slip style High temperature elastomers available on request Available in both slip style for pumping wells or mandrel style for gas well applications WK WMK WSK Seaboard WK / WMK / WSK Tubing Head 1.5M psi Tubing Head WK/WMK Tubing Head Bottom Thread 4 1/2 in. 5 1/2 in. 7 in. Inner String Size 1 in. to 2 1/2 in. 1 in. to 2 1/2 in. 1 in. to 3 in. Minimum Bore 4.06 in. 5.12 in. 6.38 in. Bottom Connection Working Pressure Test Pressure Max Load Limit Cap Thread Cap Material Type of Suspension Side Outlets Body Material Height Weight Stripper Rubbers 8rd 1.5M psi 3M psi 65M lb 7 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Ductile 12 in. 82 lb N/A Specifications WSK Tubing Head 4 1/2 in. 5 1/2 in. 7 in. 1 in. to 2 1/2 in. 1 in. to 2 1/2 in. 1 in. to 3 in. 4.06 in. 5.12 in. 6.38 in. 8rd 1.5M psi 3M psi 65M lb 7 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Ductile 16 1/2 in. 116 lb 1 in. - 2 1/2 in.

2M psi - 3M psi working pressure rating 4M/6M psi test pressure Maximum slip load: 85M lb High temperature elastomers available Available in both slip style for pumping well or mandrel style for gas well applications Unique V-style rubber packing ring which energizes under pressure to provide superior seal in slip style Seaboard WR / WMR / WSR Tubing Head 2M/3M psi working pressure Tubing Head 2M psi WR/WMR/WSR Tubing Head Bottom Thread 4 1/2 in. 5 1/2 in. 7 in. Inner String Size 1 in. to 2 1/2 in. 1 in. to 3 in. 1 in. to 3 in. Minimum Bore 4.06 in. 5.12 in. 6.38 in. Bottom Connection Working Pressure Test Pressure 8rd or SOW 2M psi 4M psi Max Load Limit 85M lb Cap Thread Cap Material Type of Suspension Side Outlets Body Material WR Height WR Weight WSR Height WSR Weight Stripper Rubbers 8 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Steel 13 3/8 in. 128 lb 19 1/8 in. 183 lb 2 in. - 3 in. Specifications 3M psi WR/WMR/WSR Tubing Head 4 1/2 in. 5 1/2 in. 7 in. 1 in. to 2 1/2 in. 1 in. to 3 in. 1 in. to 3 in. 4.06 in. 5.12 in. 6.38 in. 8rd or SOW 3M psi 6M psi 85M lb 8 5/8 in. 8rd Steel Slip or Mandrel 2 in. LPO Steel 13 3/8 in. 132 lb 19 1/8 in. 187 lb 2 in. - 3 in.

2M psi working pressure (WP) rating 4M psi test pressure rating Maximum slip load: 176M lbs Unique V-style rubber packing ring which energizes under pressure Slips can be attached on the rig floor Saves time and provides safer BOP run through Ability to run through BOP is safer and saves time making it cost effective V-style rubber packing provides superior sealing capabilities Seaboard Model W92 Casing Head The Seaboard TM Model W92 Casing Head suspends casing and isolates the well bore in applications with either rod pumps or gas wells Specifications W92 Casing Head Bottom Thread 7 in. 7 5/8 in. 8 5/8 in. 9 5/8 in. 10 3/4 in. 11 3/4 in. 12 3/4 in. 13 3/8 in. Cap Thread 8 5/8 in. 8rd 10 3/4 in. 8rd 10 3/4 in. 8rd 11 3/4 in. 8rd 12 3/4 in. 8rd 16 in. 8rd 16 in. 8rd 16 in. 8rd Inner String Size 4 1/2 in. 4 1/2 in. to 5 1/2 in. 4 1/2 in. to 7 in. 4 1/2 in. to 7 5/8 in. 4 1/2 in. to 8 5/8 in. 4 1/2 in. to 9 5/8 in. 4 1/2 in. to 9 5/8 in. 4 1/2 in. to 9 5/8 in. Minimum Bore 6.44 in. 7.00 in. 8.00 in. 9.00 in. 10.00 in. 11.00 in. 12.00 in. 12.50 in. Weight 110 lb 134 lb 161 lb 203 lb 231 lb 297 lb 363 lb 431 lb Height 13 5/8 in. 15 7/8 in. Bottom Connection Cap Material Type of Suspension Side Outlets Body Material 8rd or SOW Ductile Slip or Mandrel 2 in. LPO Steel

Available in 2M psi, 3M psi and 5M psi working pressures Available in Slip and Seal design or Mandrel Tubing Hanger Slip and Seal parts available for 1 1/4 in. (1.66 in.) and 1 1/2 in. (1.90 in.) Available for coil tubing applications Availability of 2 7/8 in. EUE 8rd bottom connection which reduces the probability of added connections to adapt from a casing thread to a tubing connection size Seaboard WX Tubing Head 2M, 3M & 5M psi working pressure Tubing Head Small compact design that benefits when running a velocity string in a plunger lift application Availability of 2 7/8 in. EUE 8rd bottom connection which reduces the probability of added connections to adapt from a casing thread to a tubing connection size Sizes 2 7/8 in. UPTBG x 1.66 in. Slip & Seal 2 7/8 in. UPTBG x 1.90 in. Slip & Seal

Rated at 2M psi maximum working pressure 5M psi working pressure available in 4 1/2 in. 7 in. sizes Adapts plain end pipe to a male threaded connection When used with a belled nipple, casing can be cut at desired length and belled nipple can be welded on Seaboard Belled Nipples Slip on weld X male thread SOW Connection Size 8rd (in.) Height (in.) Weight (lb) 4 1/2 x 4 1/2 6 5 1/2 5 1/2 x 5 1/2 6 3/4 7 1/2 7 x 7 7 3/4 16 1/2 8 5/8 x 8 5/8 8 30 1/2 9 5/8 x 9 5/8 8 35 10 3/4 x 10 3/4 8 42

Economical method of adapting BOP to wellhead All flanges rated at 2M psi maximum working pressure Adapts a flanged BOP to an independent style or threaded wellhead connection O-ring seal on flange face to wellhead Seaboard Drilling Flanges 2M psi maximum working pressure API Flange Size Max Working Pressure (psi) Thread Size (in.) Ring Gasket No. of Studs Stud Size (in.) For Use With O-Ring Size WDTH 7 1/16 in. 2M 7 5/8 8rd R45 12 1 x 7 1/2 WK 2-440 56 9 in. 3M 7 5/8 8rd R49 12 1 3/8 x 9 1/2 WK 2-440 87 7 1/16 in. 2M 8 5/8 8rd R45 12 1 x 7 1/2 WR 2-443 56 7 1/16 in. 3M 8 5/8 8rd R45 12 1 1/8 x 8 1/2 WR 2-443 56 9 in. 3M 8 5/8 8rd R49 12 1 3/8 x 9 1/2 WR 2-443 87 7 1/16 in. 2M 8 5/8 8rd R45 12 1 x 7 1/2 W92 7 in. 2-444 65 9 in. 3M 8 5/8 8rd R49 12 1 3/8 x 9 1/2 W92 7 in. 2-444 87 11 in. 2M 10 3/4 8rd R53 16 1 1/4 x 9 1/4 W92 8 5/8 in. 2-448 172 11 in. 3M 10 3/4 8rd R53 16 1 3/8 x 10 W92 8 5/8 in. 2-448 171 11 in. 2M 11 3/4 8rd R53 16 1 1/4 x 9 1/4 W92 9 5/8 in. 2-450 164 11 in. 3M 11 3/4 8rd R53 16 1 3/8 x 10 W92 9 5/8 in. 2-450 163 13 5/8 in. 2M 12 3/4 8rd R57 20 1 1/4 x 9 1/2 W92 10 3/4 in. 2-452 156 13 5/8 in. 3M 12 3/4 8rd R57 20 1 3/8 x 10 3/4 W92 10 3/4 in. 2-452 155 13 5/8 in. 2M 16 8rd R57 20 1 1/4 x 9 1/2 13 5/8 in. 3M 16 8rd R57 20 1 3/8 x 10 3/4 W92 11 3/4 in. W92 12 3/4 in. W92 13 3/8 in. W92 11 3/4 in. W92 12 3/4 in. W92 13 3/8 in. 2-458 183 2-458 182

Manufactured to API 6A Specifications Other sizes available Adapts a flange connection to a threaded connection Seaboard Companion Flanges Flanged to Threaded Adapters Description 1 13/16 in. 10M x 2 in. LPO F/5M service 1 13/16 in. 10M x 2 3/8 in. EUE 8rd F/5M service 2 1/16 in. 5M x 2 in. LPO 2 1/16 in. 5M x 2 1/16 in. LPO 5M x 2 3/8 in. EUE 2 9/16 in. 5M x 2 in. LPO 2 9/16 in. 5M x 2 7/8 in. EUE 8rd

W-500FS and W-500FC Flanged Rod Bop W-500F Flanged Rod BOP Single/Dual W-300 and 500T Threaded Rod Blow-Out Preventer W-212 Blow-Out Preventer W-150 Blow-Out Preventer 5K Pumping Tee 3K Pumping Tee High Temperature Double Pack Stuffing Boxes (W-HPSB) High Pressure Double Pack Stuffing Boxes with Flapper Valve (W-HPSBF) Stuffing Box (W-SB) Tee Based Stuffing Box (W-SBT) Inverted Stuffing Box (W-IVSB) Inverted Tee Based Stuffing Box (W-IVSBT) Big Shot (W-BS) Stuffing Box W-Big Shot Tee Based (W-BST) Stuffing Box Double Pack Stuffing Box (W-DPSB) Inverted Double Pack Stuffing Box (W-IVDPSB) Big Shot Double Pack (W-BSDP) Stuffing Box Pollution Controlled Double Pack Stuffing Box (W-PCDP) 5M Stuffing Box Packing Options V-Style Packing BUNA (Soft) Cone Packing Seagold TM HT (Kevlar Brass Filled) Cone Packing HSN Cone Packing PFTE Cone Packing PFTE Filled Cone Packing High Tensile Cone Packing Soft-Lubricated Cone Packing Seagold TM (Brass Filled) Cone Packing Environmental Control Adapter (ECA) High Pressure Lube Upper Gland (W-HPLUG) Lube Upper Gland (W-LUG) Polished Rod Clamps - W-25 series/w-40 series Polished Rod Clamps - W-10S series/w-10d series/w-10t series Polished Rod Lubricator Leveling Plates Rod Rotators Production Equipment

Multiple flange configurations available Integral tee available Test ports available Standard Rams available Blind Rams available Hydraulic Rams available upon request Integral tee design reduces height Seaboard W-500FS and W-500FC Flanged Rod BOP Flanged X Studded Ram BOP Ram & stem are nitride coated to prevent galling Indicating grooves help facilitate correct opened and closed position Available with standard sealing Rams or with ceramic coated rod clamping Rams, to prevent damage to the polished rod. NOTE: Alternative flange sizes/configurations available upon request. Custom pricing may apply.

Multiple flange configurations available Integral tee available Test ports available Standard Rams available Blind Rams available Hydraulic Rams available upon request Dual Ram Manual Single Ram Manual Integral tee design reduces height Spare parts are readily available for this design Can be used in conjunction with flanged wellhead equipment Seaboard W-500F Flanged Rod BOP Single/Dual Flanged X Studded Ram BOP NOTE: Alternative flange sizes/configurations available upon request. Custom pricing may apply.

W-300 W-500T W-500T Cross Section Seaboard W-300 and 500T Threaded Rod Blow Out Preventer Available in 4 in. and 5 in. nominal sizes with full opening bore Suitable for low temperature (-50 F), & sour service (NACE MR-01-75) Available in high temperature models 3M psi & 5M psi max pressure rams available in 1 1/4 in., 1 1/2 in. or blind Low pressure (1.5M psi max when closed) BOP body capable of 5M psi shell test when rams are opened. Pressure balanced rams allow use of well pressure to assist in closing process, reducing operator effort Forged alloy steel body eliminates risk of casting porosity Secures well by sealing around the polished rod Connections Box (up) Pin (down) 2 3/8 in. EUE 2 3/8 in. EUE 2 7/8 in. EUE 2 7/8 in. EUE 3 1/2 in. EUE 3 1/2 in. EUE 3 in. LPO 3 1/2 in. EUE 3 in. LPO 3 in. LPO NOTE: 3M psi (ductile) & 5M psi (4130) rams are NOT interchangeable

Packing Gland Packing Cap Ram Screw Ram Ratigan Style Blowout proof ram screw Full opening Reinforced ram block Fusion bonded coating available for corrosive applications Cost effective BOP Body Reliable for customer and end user use Seaboard W-212 Blow-Out Preventer Secures well by sealing around the polished rod Optional Features Fusion bonded corrosion protection coatings available Stainless steel for NACE trim available Specifications W-212 Sizes Available 2 3/8 in. EUE 8rd 2 7/8 in. EUE 8rd 3 1/2 in. EUE 8rd 3 in. LPO Vertical Bore 1.995 in. 2.441 in. 2.992 in. 2.900 in. Body and Cap Material Ram Materials Available Ram Screw and Packing Gland Ram Sizes Connection Handles Working Pressure Ductile Buna, Seagold TM HT, HSN Carbon steel Stainless steel available upon request Blind, 5/8-1 in., 1 1/4 in., 1 1/2 in., 1 3/4in. pin x box Optional 1.5M psi Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or

Packing Gland Packing Cap O-Ring Ram Screw Ram Huber style Quick opening Blowout proof ram block Reinforced ram block O-ring on end caps provide reliable and pressure tight seal Cap with internal threads protected from environment BOP Body ACME thread end-cap eliminates cross threading Seaboard W-150 Blow-Out Preventer Secures well by sealing around the polished rod. Optional Features Fusion bonded corrosion protection coatings available Stainless steel for NACE trim available Specifications W-150 Sizes Available 2 3/8 in. EUE 8rd 2 7/8 in. EUE 8rd 2 1/2 in. LPO 3 in. LPO Vertical Bore 1.995 in. 2.441 in. 2.469 in. 2.900 in. Body and Cap Material Ram Materials Available Ram Screw and Packing Gland Ram Sizes Connection Handles Working Pressure Ductile Buna, Seagold TM HT, HSN Carbon steel Stainless steel available upon request Blind, 5/8-1 in., 1 1/4 in., 1 1/2 in., 1 3/4in. pin x box Optional 1.5M psi Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or

Applications up to 5M working pressure Select sizes available to meet NACE requirements 1 in. bleeder standard Available with corrosion resistant coatings upon request Cost effective Robust and reliable Seaboard 5K Pumping Tee Redirects fluid and gas to a holding tank (wing) from the run EUE 8rd Bottom (in.) EUE 8rd Top (in.) LPO Outlet Side (in.) 1 in. LPO Bleeder on All 2 3/8 2 3/8 2 2 7/8 2 7/8 2 2 7/8 2 7/8 3 3 1/2 3 2 3 1/2 3 1/2 2 3 1/2 3 1/2 3

Applications up to 3M psi working pressure Select sizes available to meet NACE requirements Both EUE and LPO available 1 in. bleeder standard Available with corrosion resistant coatings upon request Some sizes available in 5M psi working pressure Cost Effective Seaboard 3K Pumping Tee Redirects fluid and gas to a holding tank (wing) from the run Reliable for customers Bottom (in.) Bottom LPO EUE 8rd Top (in.) Box Bottom Top LPO EUE 8rd Outlet LPO (in.) LPO Bleeder (in.) 2 3/8 EUE8rd 2 LPO 2 1 2 3/8 EUE 8rd 2 3/8 EUE 8rd 2 1 2 3/8 EUE 8rd 3 LPO 3 1 2 7/8 EUE 8rd 2 LPO 2 1 2 7/8 EUE 8rd 2 3/8 EUE 8rd 2 1 2 7/8 EUE 8rd 2 7/8 EUE 8rd 2 1 2 7/8 EUE 8rd 2 7/8 EUE 8rd 2 1/2 1 2 7/8 EUE 8rd 2 7/8 EUE 8rd 3 1 2 7/8 EUE 8rd 2 1/2 LPO 2 1 2 7/8 EUE 8rd 2 1/2 11 1/2V 2 1 2 7/8 EUE 8rd 3 LPO 2 1 2 7/8 EUE 8rd 3 LPO 3 1 2 1/2 LPO 2 3/8 EUE 8rd 2 1 3 1/2 EUE 8rd 3 LPO 2 1 3 1/2 EUE 8rd 3 LPO 3 1 3 1/2 EUE 8rd 3 1/2 EUE 8rd 2 1 3 1/2 EUE 8rd 3 1/2 EUE 8rd 3 1 3 LPO 3 LPO 3 1

Seaboard 3k Pumping Tee con t Bottom (in.) Bottom LPO EUE 8rd Top (in.) Pin Bottom Top LPO EUE 8rd Outlet LPO (in.) LPO Bleeder (in.) 2 3/8 EUE8rd 2 LPO 2 1 2 3/8 EUE 8rd 2 3/8 EUE 8rd 2 1 2 7/8 EUE 8rd 2 3/8 EUE 8rd 2 1 2 7/8 EUE 8rd 2 7/8 EUE 8rd 2 1 2 7/8 EUE 8rd 2 1/2 LPO 2 1 2 7/8 EUE 8rd 2 1/2 11 1/2V 2 1 2 7/8 EUE 8rd 2 1/2 11 1/2V 3 1 2 7/8 EUE 8rd 3 LPO 2 1 3 LPO 3 LPO 3 1

Upper packing can be replaced under pressure Available with pollution control check valve Available in flanged or threaded versions For improved performance, use in conjunction with W-plug Easily incorporated into any existing wellhead completion Suitable for steam applications Suitable for sour service all materials conform to NACE MR-01-75 requirements Seaboard High Temperature Double Pack Stuffing Boxes (W-HPSB) The W-HPSB Double Pack Stuffing Box is a self-contained, low profile, durable unit designed to operate at pressures up to 3M psi and temperatures up to 650 F

Integrated flapper valve that closes automatically if Polished Rod breaks Suitable for sour service all materials conform to NACE MR-01-75 specifications V- Style upper (primary) packing. Available in 2 3/8 in., 2 7/8 in. & 3 1/2 in. EUE 8RD Male thread Available in 1 1/4 in. & 1 1/2 in. Polished Rod sizes Can be used in conjunction with a W-plug for improved performance Upper packing can be replaced under pressure Seaboard High Pressure Double Pack Stuffing Boxes with Flapper Valve (W-HPSBF) The W-HPSBF Double Pack Stuffing Box with integral flapper valve is designed to reduce cost while increasing productivity. It is a self-contained, low profile, all steel unit, designed to operate at pressures up to 5M psi.

Lube Gland Cap Cone Packing Upper Lube Gland Lower Lube Gland Cost effective Standard in oil and gas industry; fits most applications Low profile Features up to a 3 flex reducing the need for exact alignment with pumping unit 1.5M psi working pressure Ductile material Cone Packing Single Pack Base Available in various thread and packing size combinations Can be used in conjunction with a W-plug for improved performance Seaboard Stuffing Box (W-SB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 4 Bottom Cones 1

Cap Cone Packing Upper Gland Lower Gland Cone Packing Set Follower SBT Base Cost effective solution 1.5M psi working presure Ductile material Available in various thread and packing size combinations Can be used in conjunction with a W-plug for improved performance T-base eliminates one connection, reducing potential leak point Seaboard Tee Based Stuffing Box (W-SBT) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 4 Bottom Cones 1 *Note: Corrosion resistant coatings available contact Customer Service

Inverted Gland Cap Cone Packing Set Superior packing contact with polished rod Self energized inverted packing on the Polished Rod seal protects against pressure spikes Cost effective For improved performance, use in conjunction with W-plug Inverted Ring Available in various thread and packing size combinations WIVSB Base Seaboard Inverted Stuffing Box (W-IVSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available contact Customer Service

Imported Gland Cap Cone Packing Set Inverted Ring Follower WIVSBT Base Low Profile Pressure Energized Seal Superior packing contact with the Polished Rod For improved performance, use in conjunction with W-plug 1.5M psi working pressure Ductile Material Reciprocating pump Extremely low profile wells Seaboard Inverted Tee Based Stuffing Box (W-IVSBT) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Split Cone Packing WP Material 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available contact Customer Service

Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Seaboard Big Shot (W-BS) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Reciprocating Rod pump with threaded cap Ability to be used in height restricted applications (Big Shot is 10 in. tall) Can be used in conjunction with a W-plug for improved performance Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring is designed to reduce polished rod scarring Bottom Connection Cone Packing Size 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available - contact Customer Serivce

Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Can be used in conjunction with a W-plug for improved performance Seaboard W-Big Shot Tee Based (W-BST) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring designed to reduce polished rod scarring Bottom X Side Connection Split Cone Packing 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 3/8 in. EUE 8rd PIN X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd PIN X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. PIECES OF SPLIT CONES REQUIRED AMOUNT TOP CONES 5 BOTTOM CONES 1 Note: Corrosion resistant coatings available - contact Customer Service

Lube Gland Upper Lube Lower Lube Cone Packing Set Compression Bolts Double Pack Body Compression Ring Cone Packing Double Pack Base Designed to reduce costly packing maintenance time 1.5M psi working pressure Ductile material Double packing enables primary packing to be changed under pressure Can be used in conjunction with a W-plug for improved performance When properly installed, features a 3 flex reducing the need for exact alignment with pumping unit. Seaboard Double Pack Stuffing Box (W-DPSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Split Cone Packing 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. Pieces of Split Cones Required Amount Top Cones 6 Bottom Cones 1

Inverted Gland Cap Cone Packing Set Inverted Ring Compression Bolt WIVDPSB Body Compression Ring Cone Packing WIVDPSB Base Double Packing allows primary packing to be changed under pressure Self energized inverted packing on the Polished Rod seal protects against pressure spikes Superior Packing contact with Polished Rod Improved performance possible when used in conjunction with the W-plug 1.5M psi working pressure Ductile material Available in various thread and packing size combinations Seaboard Inverted Double Pack Stuffing Box (W-IVDPSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in, 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1 Note: Corrosion resistant coatings available - contact Customer Service

Seaboard Big Shot Double Pack (W-BSDP) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Reciprocating Rod pump with threaded cap Ability to be used in several applications with height restrictions (Big Shot Double Pack is 15 in. tall) Can be used in conjunction with a W-plug for improved performance Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring designed to reduce polished rod scarring Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1 Note: Corrosion resistant coatings avaliable contact Customer Service

Two independently adjustable packing chambers Base has a 1/2 in. NPT test port Unique misaligning feature reduces need for exact alignment with the pumping unit 1.5M psi working pressure maximum Maximum operating temperature: 350 F Pollution Control Adapter acceptable to -50 F Ductile material Adaptable to Environmental Control Adapter (ECA) Can be used in conjunction with a W-plug for improved performance Seaboard Pollution Controlled Double Pack Stuffing Box (W-PCDP) Redirects the fluid and gas into the flow line by sealing off the well Promotes clean and environmentally sound well site hookup Packing can be changed under pressure Features up to a 3 flex reducing the need for exact alignment with pumping unit Flapper closes automatically if Polished Rod breaks Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 in. LP 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1

CP Style (not shown) Max temperature: 650 O F (345 O C) Max burst temperature: 1000 o F (540 O C) Max 30% H 2 S CP Style QT Style Temperature: 500 O F Reciprocating: 1.5M psi (80 bar) Shaft Speed: 2.8M fpm (14 m/s) V-Packing Material composition includes Nitrile elastomer and cotton fabric specifically formulated to be compatible with oil and gas applications Temperature capability: - 20 O F (-29 O C) to 250 O F (121 O C) QT Style V-Packing 5M Stuffing Box Packing Options CP Style Engineered for high H 2 S content wells with long stroke and fast pumping. Specifically designed with a reinforced sealing surface for high abrasives. Considered to be the best extreme service packing in today s market place. QT Style A blend of high-performance Aramid and Fiberglass fibers are impregnated with PTFE, increasing chemical resistance. Its excellent properties and density help provide an extrusion resistant barrier designed to extend the life of the packing. The fiberglass conducts heat while the PTFE mitigates shaft wear. V-Packing Fluid seal rod packing incorporates the proven theory of lip-type action (sealing from pressure), with space provided between each ring designed to provide a perfect, non-binding fluid seal for lubrication of the rod. This packing requires no tightening. It performs best when run loose (finger-tight). Normal operating pressure expands the lip to compensate for wear until the packing is completely worn out.

Used in the Seaboard TM W-HPLUG, this V-style Nitrile compound is rated to 250 F (121 O C) This secondary packing seal is designed to help prevent costly environmental spills Environmentally friendly Seaboard V-Style Packing Used in the Seaboard W-HPLUG, this V-style Nitrile compound is rated to 250 F. This secondary packing seal is designed to help prevent costly environmental spills. V-Style Packing Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Packing Sizes: 2 1/2 in. OD X 3 1/8 in. High Standard, HSN or Moly Filled Nylon

Sweet crude production with high oil to water ratios Low abrasive content Max temperature: 110 F (43 C) Max 2% H 2 S Normal conditions, standard Buna rubber Extended shelf life Seaboard BUNA (Soft) Cone Packing General Service Sweet crude production with high oil to water ratios and low abrasive content Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Engineered for high H 2 S wells with long stroke and fast pumping Specifically designed with reinforced sealing surface for high abrasives Max temperature: 650 F (345 C) Max burst temperature: 1000 F (540 C) Max 30% H 2 S Considered to be one of the best extreme service packings in today s market place. Extended shelf life Seagold HT (Kevlar Brass Filled) Cone Packing Specialty Service Engineered for high H 2 S wells with long stroke and fast pumping. Specifically designed with reinforced sealing surface for high abrasives. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or

Well suited for higher gas to oil ratios than conventional general service packing Designed to withstand high concentrations of hydro carbons and increase production temperatures for extended periods of time Max temperature: 355 F (180 C) Max 8-10% H 2 S Higher tolerance to CO 2 concentrations Extended shelf life Seaboard HSN Cone Packing Specialty Service Well suited for higher gas to oil ratios than conventional general service packing. Designed to withstand high concentrations of hydro carbons, and increase production temperatures for extended periods of time. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Built with PFTE rope packing to create an inner seal around the polished rod Designed to reduce heat & polished rod wear, and extend the life of the rubber cone housing Works well on worn polished rods, not recommended for scored polished rods Max temperature: 500 F (250 C) Max 5-8% H 2 S Reliable long life on pump Extended shelf life Seaboard PFTE Cone Packing Specialty Service The PFTE Cone Packing is built with PFTE rope packing to create an inner seal around the polished rod. It is designed to reduce heat & polished rod wear and extend the life of the rubber cone housing. It works well on worn rods but, is not recommended for scored polished rods. Sizes 1in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Sweet crude production with long strokes and rapid pumping cycles Works well with gas locking wells when added lubrication is needed Max temperature: 110 F (43 C) Max 2% H 2 S Reduces friction and lowers temperatures Extended shelf life Seaboard PFTE Filled Cone Packing Cone Packing - General Service PFTE Filled Cone Packing has sweet crude production with long strokes and rapid pumping cycles. It works well with gas locking wells when added lubrication is needed. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

for low gas to oil ratio, and high water cut wells This packing has a high tensile strength at 2M psi Red: 1.5M psi, Green: 2M psi Max Temperature: 400 F (200 C) Max 15% H 2 S Reliable, long life on pump for end users Extended shelf life Seaboard High Tensile Cone Packing Specialty Service Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Recommended for wells pumping off or not on a timer Sweet crude production with high oil to water ratios Low abrasive content Max temperature: 110 F (43 C) Max 2% H 2 S Reduces polished rod squealing, with added wax lubrication Extended shelf life Seaboard Soft-Lubricated Cone Packing General Service Recommended for wells pumping off or not on a timer. Sweet crude production with high oil to water ratios. Low abrasive content. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Best suited for wells producing medium to heavy oil Handles moderate produced heat along with higher than average friction heat Can be used with moderate abrasives when additional lubrication is not required Max temperature: 130 F (70 C) Max 5% H 2 S Sweet to moderate sour crude production with high oil to water ratios Reduces deposit buildup and dissipates heat Seagold (Brass Filled) Cone Packing General Service Brass Filled Cone Packing is best suited for wells producing medium to heavy oil 20-30 API. Handles moderate produced heat along with higher than average friction heat and can be used with light to moderate abrasives when additional lubrication is not required. Composite brass impregnated rubber helps dissipate friction heat, while maintaining rubber integrity Acts as a cleaner scraping residual oil away from the turn around. Extended shelf life Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or

Meets NEC Class 1, Div. 1 requirements 2 connections for assembly Long travel float Both Normally Open and Closed contacts Corrosion resistant components Used in conjunction with Seaboard TM W-H Plug Reduces spills due to leakage Seaboard Environmental Control Adapter (ECA) Adaptable to any W - Series Stuffing Box Container Stainless Steel Plastic (Not Shown) Switch Explosion Proof Standard

Provides a secondary seal Uses V-Style packing Fits any Seaboard TM W-series stuffing box Promotes clean and environmentally sound well site hookup Seaboard High Pressure Lube Upper Gland (W-HPLUG) Upper Secondary Seal High Pressure Lube Upper Gland (W-HPlug) Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Standard on Seaboard TM models Zerk fitting for maintenance Ductile iron material Designed to extend packing life and reduce maintenance cost Top split cone balances oil film on the Polished Rod Seaboard Lube Upper Gland (W-LUG) Upper Lubricating Gland Lube Upper Gland (W-Lug) Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.

Available in standard rod sizes Features 4140 heat treated steel hinge pins Phosphate coated Steel body material 9 in. rotating diameter Cost effective W-25 Series W-40 Series Reliable Seaboard Polished Rod Clamps Friction type clamp Specifications W-25 Series W-40 Series Rated Load 25,000 lb 40,000 lb Polished Rod Size 1 1/8 in., 1 1/4 in., 1 1/2 in. 1 1/8 in., 1 1/4 in., 1 1/2 in. Recommended Min / Max Bolt Torque 250/300 ft-lbf 500/550 ft-lbf Weight 10.5 lb 25 lb Height 4 1/8 in. 6 3/4 in.

Individually hinged Available in standard rod sizes Features heat treated 4140 steel hinge pins Phosphate coated Steel Body Material Rotating Diameter 5 3/4 in. Can be individually torqued Compact design W-10S SERIES W-10D SERIES W-10T SERIES Reduced size with no decrease in weight load capacity Seaboard Polished Rod Clamps Indention type clamps W-10S Series 1 Bolt Specifications W-10D Series 2 Bolt W-10T Series 3 Bolt Rated Load 13,000 lb 26,000 lb 40,000 lb Polished Rod Size 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. Weight 3.75 lb 7.5 lb 11.25 lb Height 2 1/2 in. 5 in. 7 1/2 in. Recommended Min/Max Bolt Torque 225/250 ft-lbf

Provides convenient Polished Rod lubrication Easy installation. Use with any style of stuffing box Lubrication extends stuffing box packing life Uses replaceable felt wicks Available for all Polished Rod sizes 5 1/2 in. height Single completion Designed to prevent premature packing failure due to lack of lubrication on the Polished Rod Seaboard Polished Rod Lubricator Rod Lubricator with Wicks For use in heavy water to oil well applications Applies when the unit first begins rotation The Polished Rod Lubricator is easily installed and can be used with any style of stuffing box. Lubrication extends stuffing box packing life and the lubricator uses replaceable felt wicks. Available for all polished rod sizes. Sizes Sizes: 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 3/4 in.

When Used WITH A Rod Rotator Can be installed under the Rod Rotator or under the Polished Rod Clamp if Rod Rotators aren t used Available in most common Polished Rod sizes Designed to ensure uniform engagement between the Polished Rod Clamp and the carrier bar Designed to help minimize Polished Rod breaks When Used WITHOUT A Rod Rotator Seaboard Leveling Plates The use of leveling plates can help compensate for misalignment of the carrier bar of up to 2 in any direction. Sizes 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 3/4 in.

Slow gear allows rod gear torque to easily disperse downhole Ductile body material Helical gear rotation Polished Rod sizes 1 1/8 in. to 1 1/4 in. W-164 W-302 W-252 W-302SG Seaboard Rod Rotators Rod rotation is one of the most effective means of reducing rod coupling and tubing wear, especially when used in conjunction with rod guides. Seaboard rod rotators are available in maximum recommended loads ranging from 13,000 40,000 lbs. Specifications W-164 W-252 W-302 W-302SG Max. Recommended Load (lb) 13,000 33,000 40,000 40,000 Required Bridal Clearance Width (in.) 4 6 7 7 Polished Rod Sizes 1 1/8 in. to 1 1/4 in. 1 1/8 in. to 1 1/2 in. 1 1/8 in. to 1 3/4 in. 1 1/8 in. to 1 3/4 in. Height (in.) 4 1/4 5 1/2 6 1/2 6 1/2 Weight (lb) 18 35 47 47 Standard Actuator Cable Length (ft.) 16 16 25 25 90 Lever Pull Per Revolution 24 28 77 154 Patent Pending - New & Improved Ratchet Pawl design on the W-164, W-302 & W-302SG