DHR0 LED TECHNICAL MANUAL SIN CE 9 Den Haan Rotterdam
TABLE OF CONTENTS Disclaimer Technical data Dimensions Available models Exploded view - base mounting Exploded view - side mounting Exploded view - retrofit Exploded view - hoistable Electrical specification Lifetime Control Positioning sidelights Positioning all-round lights Mounting Page Page Page Page Page Page Page Page 9 Page 0 Page 0 Page Page Page DISCLAIMER Den Haan Rotterdam B.V. is not responsible or liable for (in)direct or consequential damages from the use or application of this equipment and manual. All illustrations in this manual are for illustrative purposes only. This manual is not intended to cover every possible detail about the product and its maintenance. Den Haan Rotterdam B.V. does not assume responsibility or reliability for actual use based on the text, illustrations and diagrams. Copyright, Den Haan Rotterdam B.V. Version.0 December 0 This document contains proprietary information that is protected by copyright. All rights reserved.
TECHNICAL DATA Application: Ÿ For all sea-going vessels with a length of less than 0 metres Ÿ Rhine and European inland navigation Construction: Ÿ According to International Regulations for Preventing Collisons at Sea; COLREG and latest amendments Ÿ Conform Rhine and European inland navigation rules Ÿ In compliance with the Directives 9/9/EC and //EC, following the European standard: EN (00) AC(00), Inland navigation vessels and sea-going vessels navigation light Materials: Ÿ Housing: Seawater resistant aluminium, hard anodised, matt black Ÿ LED driver: epoxy potted Ÿ Screen: Seawater resistant aluminium, hard anodised Ÿ Lens: Borosilicate glass Ÿ Base: Delrin black Min. visibilty: Sector lights Starboard - bright Port - bright Masthead - bright Stern - bright Towing - bright NM NM NM NM NM All-round - bright - bright - bright - bright - bright Electrical insulation class: I, (grounded) / III Powersupply: VDC -0% +0% Protection class: IP X life time: 0,000 Hours Operation temperature: - C up to + C Mounting: Base, side or hoistable NM NM NM NM NM
DIMENSIONS Base mounting 9 0 Ø Ø PG9 Side mounting Ø0 0 Pg9 Ø Ø0 M Retrofit Ø The DHR0 Retrofit is designed to easily screw it in the original DHR mounting base with bajonet socket. This makes your navigation light the most easy upgrade ever done. The mounting base is not included, because it is already on the vessel. If not, then the DHR0 base mounted version is recommended. Hoistable 0 Appr. PG9 All dimensions in mm.
AVAILABLE MODELS Base Mounted Sector lights Min. Visibility Colour Power Art. Code Starboard Port Masthead Stern Towing NM 0.0.00.00 0.0.00.00 0.0.00.00 0.0.00.00 0.0.09.00 All-round lights Min. Visibility Colour 0.0.00.00 0.0.00.00 0.0.00.00 0.09.00.00 0.0.00.00 Sector lights Min. Visibility Colour Power Art. Code Starboard Port Masthead Stern Towing NM 0.0.00.0 0.0.00.0 0.0.00.0 0.0.00.0 0.0.09.0 All-round lights Min. Visibility Colour All-round lights Min. Visibility Colour Art. Code Side Mounted Retrofit Art. Code 0.0.00.0 0.0.00.0 0.0.00.0 0.09.00.0 0.0.00.0 Hoistable Art. Code 0.0.00.0 0.0.00.0 0.0.00.0 0.09.00.0 0.0.00.0
EXPLODED VIEW - BASE MOUNTING 9 0 Item Part Material Cover Gasket DHR0 Glass Tube Screen side lights masthead stern Heatsink triangle LED PCB (Starboard / ) (Port / red) (Masthead / Stern / ) (Towing / ) Housing Side and Base LED driver O-Ring DHR0 Base plate Cable gland Pg 9 Membrane Vent Neoprene - shore 0 Borosilicate glass Seawater resistant aluminium, hard anodized 9 0 Quantity Seawater resistant aluminium MC-PCB, aluminum. mm Led platinum dragon PCB - Potting matrial: Polyurethaan Neoprene - shore 0 Delrin black Body: Polyamide - Seal: Neoprene Body: Silicone rubber - Membrane: eptfe Number 0.99.00.90 0.99.00. 0.99.00. 0.99.00.0 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00.0 0.99.00.
EXPLODED VIEW - SIDE MOUNTING 9 0 Item Part Material Quantity Neoprene - shore 0 Borosilicate glass Seawater resistant aluminium, hard anodized Cover Gasket DHR0 Glass Tube Screen side lights masthead stern Heatsink triangle LED PCB Seawater resistant aluminium MC-PCB, aluminum. mm 9 0 (Starboard / ) (Port / red) (Masthead / Stern / ) (Towing / ) Housing Side and Base LED driver O-Ring DHR0 Cable gland Pg 9 Gasket DHR0 Side Side mounting piece Membrane Vent Led platinum dragon PCB - Potting matrial: Polyurethaan Neoprene - shore 0 Body: Polyamide - Seal: Neoprene Neoprene - shore 0 Delrin black Body: Silicone rubber - Membrane: eptfe Number 0.99.00.90 0.99.00. 0.99.00. 0.99.00.0 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00.
EXPLODED VIEW - RETROFIT Item Part Material Cover Gasket DHR0 Glass Tube Heatsink triangle LED PCB (Starboard / ) (Port / red) (Masthead / Stern / ) (Towing / ) Housing Retrofit (Only Retrofit) LED driver Gasket Retrofit (Only Retrofit) Neoprene - shore 0 Borosilicate glass Seawater resistant aluminium MC-PCB, aluminum. mm Led platinum dragon PCB - Potting matrial: Polyurethaan Neoprene Quantity Number 0.99.00.90 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00.
EXPLODED VIEW - HOISTABLE 9 0 Item Part Material Cover Gasket DHR0 Glass Tube Heatsink triangle LED PCB (Starboard / ) (Port / red) (Masthead / Stern / ) (Towing / ) Housing Side and Base LED driver O-Ring DHR0 Base plate hoistable Cable gland Pg 9 Membrane Vent Gasket suspension bracket suspension bracket Neoprene - shore 0 Borosilicate glass Seawater resistant aluminium MC-PCB, aluminum. mm Led platinum dragon PCB - Potting matrial: Polyurethaan Neoprene - shore 0 Body: Polyamide - Seal: Neoprene Body: Silicone rubber - Membrane: eptfe Neoprene - shore 0 Stainless steel 9 0 Quantity 9 Number 0.99.00.90 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00. 0.99.00.9 0.99.00. 0.99.00. 0.99.00.
ELECTRICAL SPECIFICATION Power VDC Output LED DRIVER LEDS Flashing 0 P/min Retrofit + +VDC 0VDC PE - PE Close to Flash LED PCB LED driver Grounding (PE) is not required, but gives better ESD/EMI protection Navigation light Power supply Nomale voltage Typical wattige* Typical current* All types 0mA VDC ma Minimum operating current >0mA Error current Inrush current <0mA 0A * Depends on temperature, LED colour and LED production series LIFETIME CONTROL Measurements of the navigation light and specifications retrieved from the OEM, show a conformity with the minimum requirements of COLREG at an operational lifetime of 0.000 hrs. To guarantee a proper use of the LED navigation lights, we as a manufacturer advise the following: Ÿ Use the navigation light in combination with a DHR-specified control system, which monitors the status and operational life time of each individual navigation light Ÿ Each navigation light needs to undergo a quality check at least every years of use to verify it still meets the requirements of COLREG 0
POSITIONING SIDE LIGHTS Power-driven vessels Paint the inside matt black Paint the inside matt black K Parallel to the keel line Parallel to the keel line K- 9,, J J H H L L Sailing vessels J L H K J J J 00 00 00 00 00 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 [mm] L Disclaimer: Ÿ The minimum luminous intensity requirements in the forward direction are only guaranteed if the sidelights are mounted in accordance with this drawing and table. Ÿ This is an illustration to indicate the dimentions of the inboard screens, relative to the keel line of the vessel. By no means may this image be used to determine the position of the sidelights on the vessel. For positioning the lights at the vessel always check for compliance with COLREG or local rules.
POSITIONING ALL-ROUND LIGHTS S [mm] D [mm] D 00 0 0 0 0 00 000 00 00 00 00 S Diagram for choosing the minimum distance between obstacle and mounting plate Disclaimer: This is an illustration to indicate the position of the all-round light so not to be obscured by mast, topmasts or structures within the angular sector of more than degrees. By no means may this image be used to determine the position of the all-round lights on the vessel. For positioning the lights on the vessel always check for compliance with COLREG or local rules.
MOUNTING Base mounting M x L L=+P Min. Ø0 Ø P Remarks: Ÿ The mounting plate for navigation lights should be at least mm Ÿ The permissible torque should be, Nm Ÿ Use only A-grade stainless steel fasteners Side mounting M x L M x L L=0+W L=0+W W W Ø 0 Ø, Remarks: Ÿ The permissible torque should be Nm for M and Nm for M Ÿ Use only A-grade stainless steel fasteners All dimensions in mm.
ADVANCED MARITIME SIGNALLING SOLUTIONS SIN C E 9 Den Haan Rotterdam Fascinatio Boulevard 909 VA Capelle a/d IJssel T + (0) 0 0 E Sales@dhr.nl www.dhr.nl