Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover or steady control of heating and cooling circuits in a 4-pipe system ody made of moulded brass W60N (dezincification-resistant) or W617N With male thread as per ISO 8 Kvs selection with exchangeable orifice plates In combination with valve actuators KM 115(S) and K 11, 113(S) as a control unit Strainer and screw fitting available as accessories Water quality as per VI 035 K015400 Technical data M Parameters Nominal pressure PN16 Valve characteristic Quasi-linear eakage rate lass as per N 166-1 Total angle of rotation 90 (valve closed at 45 ) Operating temperature 5...90 Pressure and temperature data N 764, N 1333 mbient conditions Standards and directives low parameters N 60534, page 3 P 014/68/U luid group II ategory II, liquid No label as per article 4.3 Overview of types Nominal diameter onnection Kvs value without Material Weight orifice plate K015401 N 15 ¾" 1.5 m³/h Moulded brass W60N 0.98 kg K015400 N 15 ¾" 1.5 m³/h Moulded brass W617N 0.98 kg K00411 N 0 ¾".8 m³/h Moulded brass W60N 1.87 kg K00400 N 0 1" 4.5 m³/h Moulded brass W617N 1.77 kg Kvs value without orifice plate. Kvs values can be adapted using orifice plates. Orifice plates for setting the Kvs value Orifice plates for K015400 and K015401 Kvs value Part number 0.5 m3/h Set 0589540001 elivered with 6-way ball valve 0.4 m3/h 0.63 m3/h 1 m3/h Right of amendment reserved 017 r. Sauter 1/9
Orifice plates for K00411 K vs value Part number 0.7 m 3 /h Set 058954000 1 m 3 /h elivered with 6-way ball valve 1.6 m 3 /h.1 m 3 /h Orifice plates for K00400 K vs value Part number 0.5 m 3 /h 05804010 0.4 m 3 /h 058040104 0.65 m 3 /h 058040106 1 m 3 /h 058040110 1.3 m 3 /h 058040113 1.6 m 3 /h 058040116.5 m 3 /h 05804015 3.45 m 3 /h 058040134 ccessories escription 0378133015 1 threaded sleeve, R½", flat-sealing, N 15, with cap nut and flat seal 037813300 1 threaded sleeve, R¾", flat-sealing, N 0, with cap nut and flat seal 0378134015 1 solder nipple, Ø 15, flat-sealing, N 15, with cap nut and flat seal 0361951015 1 screw fitting for male thread with flat seal, N 15 05804000 Insulation shell for K0154** 058040003 Insulation shell for K00411 0378133115 flat-sealing screw fittings 1"-½" 037813310 flat-sealing screw fittings 1"-¾" 037813315 flat-sealing screw fittings 1"-1" 0580090001 Pliers for changing orifice plate on K0154** and K00411 058040001 itting bracket for K0154** and K00411 056033015 Strainer in gun metal, 10 150, mesh aperture 0.5, N 15 05603300 Strainer in gun metal, 10 150, mesh aperture 0.8, N 0 05603305 Strainer in gun metal, 10 150, mesh aperture 0.8, N 5 / Warranty: The technical data and pressure differences indicated here are applicable only in combination with SUTR valve actuators. The warranty does not apply if used with valve actuators from other manufacturers. / efinition of p s : Maximum admissible pressure drop in the event of a malfunction (pipe break after the ball valve) at which the actuator reliably closes the ball valve using the return spring. / efinition of p max : Maximum admissible pressure drop in control mode at which the actuator reliably opens and closes the valve. ctuator KM11510 KM1151 KM115S13 Torque 8 Nm 8 Nm 8 Nm ontrol signal -/3-point -/3-point -/3-point, 0...10 V Running time 10 s 10 s 35/60/10 s Operating voltage 30 V~ 4 V~ 4 V~/V= p [bar] K015401 K015400 K00411 K00400 p max p max p max.0.0.0 /9 Right of amendment reserved 017 r. Sauter
ctuator K1110 K111 K1131 K113S1 Torque 7 Nm 7 Nm 7 Nm 7 Nm ontrol signal -point -point 3-point 0...10 V Running time 90 s 90 s 90 s 90 s Operating voltage 30 V~ 4 V~/V= 4 V~/V= 4 V~/V= p [bar] K015401 K015400 K00411 K00400 p max p s p max p s p max p s p max p s.0.0.0.0.0.0.0.0 escription of operation The 6-way ball valve from SUTR is a compact and precise alternative for regulating heated/chilled ceilings and fan coils in four-pipe systems. It can be used as a regulating valve or a changeover valve. onventional solutions with up to four -way valves, four actuators and two or three controller outputs now only require a 6-way ball valve and an actuator. With a rotation of 90, the 6-way ball valve can go through both sequences for heating and cooling. The two holes arranged at right angles for the balls ensure that the heating and cooling systems can be separated without leakage. The ball valve can be fitted or selected with different orifice plates for the K vs value for heating and cooling, according to the design specifications. 1 5 4 6 3 Supply for network 1 1 3 4 5 \ Supply for heated/chilled ceiling Return for heated/chilled ceiling Return for network 1 Supply for network Return for network ircuit of K015400 K015401 K00411 Network 1 open Network 1 and closed Network open 100% 90% 80% 70% 60% 50% 40% 30% 0% 10% 0% 0 10 0 30 40 50 60 70 80 90 Pressure relief function on K015400, K015401 and K00411 These 6-way ball valves are equipped with an internal pressure relief function. Right of amendment reserved 017 r. Sauter 3/9
change in the media temperature (closed valve position, 45 ) in the heated/chilled ceiling can cause positive pressure or negative pressure. This could possibly damage the heated/chilled ceiling. The pressure relief function prevents this damage because the pressure in the heated/chilled ceiling is balanced with the pressure in the supply line. ircuit of K00400 Network 1 open Network 1 and closed Network open 100% 90% 80% 70% 60% 50% 40% 30% 0% 10% 0% 0 10 0 30 40 50 60 70 80 90 Material numbers as per IN: K015401, K00411 IN material no. IN designation ody W60N u Zn 36 Pb/s according to N1167 Stem W614N u Zn 39 Pb3 according to N1164 all, polished, chrome-plated W614N u Zn 39 Pb3 according to N1164 Seat PT O-ring PM Material numbers as per IN: K015400, K00400 IN material no. IN designation ody W617N u Zn 40 Pb according to N1164 Stem W614N u Zn 39 Pb3 according to N1164 all, polished, chrome-plated W614N u Zn 39 Pb3 according to N1164 Seat PT O-ring PM dditional technical data SUTR slide rule for valve sizing P100013496 Technical manual on control units 7 000477 001 itting instructions P100015803 / P100015846 / P10001691 KM 115(S) assembly P100001578 K 11/113(S) assembly P10000659 eclaration on materials and the environment M 58.001 itting position! amage to property o not install the 6-way ball valve in a suspended position, because condensate, dripping water etc. may penetrate and damage the actuator! 4/9 Right of amendment reserved 017 r. Sauter
Using with water When using water mixed with glycol or an inhibitor, the compatibility of the materials and seals used in the 6-way ball valve should be clarified with the manufacturer. The material list shown below may be used here. When using glycol we recoend a concentration of 0% to 50%. Right of amendment reserved 017 r. Sauter 5/9
low-rate chart 10 9 8 7 6 5 4 3 p V [kpa] 1 10 100 1000 kvs 4.5 kvs 3.45 kvs.5 kvs 1.6 kvs 1.3 kvs 1.5 150 90 100 80 70 60 50 40 30 0.9 1 0.8 0.7 0.6 0.5 0.4 0.3 0. V [m 3 /h] 0.1 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.0 kvs 1 kvs 0.65 kvs 0.63 kvs 0.4 kvs 0.5 0 15 9 10 8 7 6 5 4 3 1.5 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 V [l/min] 0. 0.01 0.01 0.1 p v [bar] 1 10 6/9 Right of amendment reserved 017 r. Sauter
imension drawing ombination with KM 115(S) 139 70 1 K015400 50 41 3.5 35 3 47 ¾ K015401 50 41 3.5 35 3 47 ¾ K00400 60 45 4 4 45 69 1 K00411 60 47 4.5 41 47 71 ¾ ombination with K 11, 113(S) inch 185 84 K015400 50 41 3.5 35 00.5 1 ¾ K015401 50 41 3.5 35 00.5 1 ¾ inch Right of amendment reserved 017 r. Sauter 7/9
K00400 60 45 4 4 14.5 35 1 K00411 60 47 4.5 41 4.5 45 ¾ ccessories inch Part number 0378133015 3/4" R 1/" 7.5 0378133115 1" 1/" 30 037813310 1" 3/4" 9 037813315 1" 1" 37.5 Part number 0378134015 3/4" Ø 15 10.6 17 Part number 0361951015 3/4" Rp 1/" 17 0560330** c b b H Z101 N b c inch 15 1 38 ½ 54 7 ISO 0 15 43 ¾ 67 34 8-1 5 16 53 1 79 41 H 8/9 Right of amendment reserved 017 r. Sauter
058040001 [] 80 5.5 15 5.5 50 56 9 1 50 6 15 100 14 10 1.5 80 Ø4.5 r. Sauter Im Surinam 55 H-4016 asel Tel. +41 61-695 55 55 www.sauter-controls.com Right of amendment reserved 017 r. Sauter 9/9