Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it
The valves in series 06 are swing wafer check valves, manufactured in accordance with the most severe product norms and in conformity with the quality requirements of EN ISO 900. They are available in the following versions: 06-M6.4 > with carbon steel body suitable for heating and conditioning purposes (HVAC), water treatment and distribution, agricultural applications, compressed air circuits, oils and hydrocarbons. 06-M6.6 > in stainless steel CF8M suitable for chemical plants, food processing and general industrial purposes. (Please ensure the choice of the corresponding item) YES: for installing in horizontal or vertical position.. Compact design.. The special profile with centring lugs (DN 3-0) allows mounting between flanges: PN6-0 - 6 - - ANSI 0. 3. The spring allows mounting in all positions. 4. No need for supplementary sealing during installation, thanks to the O-ring seal.. The rounded shape of the shutter reduces head losses and limits the turbulence downstream. 6. The positioning hole simplifies installation. 6 4 3 In conformity with directive 97/3/CE PED Construction and testing norms (correspondences): Flanges: EN 09, ANSI B6. Design: EN344, EN334 Marking: EN9 Testing: 00% testing in accordance with EN 66 www.brandoni.it 39
Swing wafer check valve 06-M6 DN3-0 H H 6 8 3 Q A P C 06-M6 DN300-400 7 4 8 Q A P C 40 www.brandoni.it
Materials 3 4 6 7 8 Component Body Disc Plate DN 3-0 Plate DN 300-400 O-ring Spring Eyebolt Screw Material ASTM A3 gr. CF8M, ASTM A6 gr. WCB ASTM A3 gr. CF8M, ASTM A6 gr. WCB ASTM A3 gr. CF8M AISI 36 NBR, FKM (Viton ), PTFE AISI 30 AISI 36 Stainless steel A Dimensions (mm) DN 3 40 0 6 80 00 0 00 0 300 30 400 P 0 6, 33 43 3 7 96 8 64 00 4 84 33 A Not standardized 6 6 8, 8, 3, 9 34, 36 38 3 38 4 C 77 86, 99 8 34 4 84 08 64 37 80 440 490 H 83, 88,7 98, 07 3 38 37 69 47 - - - H 4 49 3 63 73 9 9 49 67 40 - - - Q 8 30 44 6 70 80 96 69 30 70 30 Weight (kg) kg 0,43 0,4 0,8,,86,4 3,,3 8,,4 7,6 7,8 36, www.brandoni.it 4
Swing wafer check valve Maximum pressure Temperature Fluids * Hazardous gases Non-hazardous gases Hazardous liquids Non-hazardous liquids NO bar DN 3-00 6 bar DN 0-300 bar DN 0-300 bar DN 3-00 6 bar DN 0-400 bar DN 3-00 6 bar DN 0-400 * : Hazardous gas, liquids (explosive, inflammable, toxic) in accordance with 97/3/CE PED and 67/48/EEC Minimum pressure Minimum counterpressure refer to chart 0,3 bar Temperature min C Max C continuous peak NBR -0 00 0 FKM (Viton ) -0 0 70 PTFE -0 00 - NB: the maximum working pressure decreases while the temperature increases; please refer to pressure/temperature chart Pressure/temperature chart 4 3 68 04 40 76 48 84 30 36 39 F bar psi 30 43 0 90 0 4-0 0 0 40 60 80 00 0 40 60 80 00 C 4 www.brandoni.it
Head loss Fluid: water (m HO = 0,098bar) m HO 0 DN 3 DN 40 DN 0 DN 6 DN 80 DN 00 DN DN 0 DN 00 DN 0 DN 300 0 8 6 DN 30 DN 400 4 3 0,8 0,6 0, 0 0 30 0 00 00 300 00 000 000 000 mc/h Kv-DN chart DN 3 40 0 6 80 00 0 00 0 300 30 400 Kv mc/h 3 4 4 7 40 08 34 093 670 00 380 4840 Cracking pressure (mmho) Flow direction DN 3 40 0 6 80 00 0 00 0 300 30 400 with spring 3 0 94 98 96 74 6 30 44 60 with spring 4 38 6 30 0 06 6 30 36 38 without spring 80 73 70 70 76 68 00 00 0 9 93 9 www.brandoni.it 43
Swing wafer check valve Versions Carbon steel body 06 DN 3-0 investment casting DN 300-400 from solid bar 06.430 Body: Carbon steel O-ring: NBR Temp: -0 +00 C 06.43 Body: Carbon steel O-ring: FKM Temp: -0 +0 C 06.433 Body: Carbon steel O-ring: PTFE Temp: -0 +00 C Available with art. No. M6 with spring M6 DN 3-0 investment casting M6.430 See 06.430 M6.43 See 06.43 M6.433 See 06.433 Body in AISI 36 06 DN 3-0 investment casting DN 300-400 from solid bar 06.60 Body: AISI 36 O-ring: NBR Temp: -0 +00 C 06.6 Body: AISI 36 O-ring: FKM Temp: -0 +0 C 06.63 Body: AISI 36 O-ring: PTFE Temp: -0 +00 C Available with art. No. M6 with spring M6 DN 3-0 investment casting M6.60 See 06.60 M6.6 See 06.6 M6.63 See 06.63 44 www.brandoni.it
Instruction and Recommendations The information provided here is delivered with each product, and contains Instruction for use and maintenance ; it is also available on our website: www.brandoni.it (download section) STORING Keep in a closed and dry place. MAINTENANCE The valve does not require maintenance. RECOMMENDATIONS Before carrying out maintenance or dismantling the valve: - be sure that the pipes, valves and fluids have cooled down, - decrease the pressure and drain the lines and pipes in case of toxic, corrosive, inflammable or caustic liquids. Temperatures above 0 C and below 0 C might cause damage to people. INSTALLATION - Handle with care. - Be sure to install in accordance with the flow direction. - Do not weld the flanges to the piping after installing the valve. - Water hammers might cause damage and ruptures. Inclination, twisting and misalignments of the piping may subject the installed valve to excessive stresses. It is recommended that elastic joints be used in order to reduce such effects as much as possible. - When working with high temperature fluids, take care not to burn yourself - Do not dismantle or maintain the valve while the plant is under pressure - Use the O hole for harnessing and lifting. NOTE. This valve is unidirectional: install in accordance with the flow direction arrow indicated on the body. INSTALLATION - Install near the counter flanges, leaving a space in which to place the valve. - Place bolts in the lower holes of the flanges, and position the valve, placing the centring lugs (for DN 3-0) or the body of the valve (DN 300-400) on the bolts. - Insert the remaining bolts. Check that the valve is correctly aligned and tighten the bolts crosswise. DN3-0: suitable for mounting between flanges PN6-0-6-ANSI 0; DN300-400: suitable for mounting between flanges PN0-6-ANSI 0. www.brandoni.it 4