59073 Ahoy Matey PIRATE SHIP IMPORTANT SAFETY INSTRUCTIONS. PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. FOR AGES 5+ ADULT SET UP IS REQUIRED.
Part List 1 Inflatable Ahoy Matey 2 Inflatable sword x 1 3 Water blaster x 1 4 Inflatable steering wheel x 1 PIRATE SHIP x 1 5 Repair patch x 1 BANZAI 59073 20120910 1
Safety Information Warning! To avoid the risk of serious injury or death; Adult supervision required. Adult assembly required. This product is intended to be used as a toy and not as a personal flotation device. Do not hang on, stand on or tackle this product. Do not use a high pressure pump to inflate. Do not over-inflate. Do not use electric air pump if water or moisture is present. This may result in electric shock. Use product in swimming pool only. Read all instructions before using this product. Never drive this product over other swimmers. Do not dive underneath this product. Disregard and not following the instructions from manual and warnings could result in injury or death, especially for children. Only for use in water in which the child is within its depth. Do not shoot water blaster cannon directly at person s eyes or face. While every attempt is made to embody the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury resulting from use. All merchandise is sold on this condition, which no representative of the company can waive or change. SAFETY CHECKLIST: READ BEFORE USING Setup 1. The inflation and deflation of the product should be done by an adult or in the presence of an adult. 2. All inflatables are temperature sensitive, therefore never unfold or inflate in temperatures below 50 F. 3. Once inflated, make sure that the product does not come in contact with stones, gravel or other sharp objects which could puncture the inflatable. 4. Do not use compressed air to inflate the product. Use a hand or foot pump. Do not over inflate. 5. Please inflate the air-chamber in correct sequence as shown. You should be able to see some crease at welding seams. 6. To inflate product, pinch the stem of the safety valve to allow air in. When fully inflated, close safety valve by pushing it down gently. To deflate, pull up safety valve and press stem together to let the air out. 7. To prevent premature material fatigue, refrain from exposing the product to sunlight unnecessarily. Over sun exposure may cause leakage. Use 1. This is a toy and not a life saving flotation device. It should not be used as such. 2. Attention! This product should be used in water level no higher than the neck of a standing child and under adult supervision. 3. There should be a minimum of 6 ft (183cm) between the product rafts and the swimming pool wall to prevent the possibility of the child falling off and hitting their head on the edge of the pool s wall. 4. Do not allow anyone to use this product who weighs over 100 lbs (45kg). After use 1. Carefully deflate, dry, roll up and store this product when not in use. 2. Do not store this product indoors or in a closed container until it is completely dry. 3. Store this product in a secure place, away from children, to prevent suffocation. 2 BANZAI 59073 20120910
Safety Information Repair patch instructions For your convenience, a repair patch has been included to repair holes in the inflatable section. Do not use the patch for holes or rips on the seam. In the event of an accidental puncture, cut out a suitably sized patch. Make sure you round the corners of your repair patch to avoid peeling. Make sure the area to be patched is clean and dry. Press patch firmly over the puncture. Do not inflate for 20 minutes. BANZAI 59073 20120910 3
Setup Instructions 1. Placement diagram: Use in swimming pools only, not on pavement or other hard surfaces. 1. 2. Roll out this product. Inspect for holes, tears or other damage. 2. 3. Insert the water blaster into the hole of this product before inflating. 4. Inflate this product with AIR. NOTE: For easy air inflation use a manual air pump designed specifically for plastic inflatables. 4. 3. 4 BANZAI 59073 20120910
Setup Instructions 4. BY MOUTH: Remove the air valve plug and squeeze the base of the valve causing the inner flap to open for inflation. Do not over inflate the item. Once the item is completely inflated, then insert the air valve plug to seal it shut. BY PUMP: Remove the air valve plug and insert air pump nozzle into the valve. The air pump nozzle should be inserted deep enough to open the inner valve flap. Be careful not to over inflate the item. Once the product is completely inflated, quickly remove the air pump nozzle and re-insert the air valve plug to seal it shut. 4. 5. OR NOTE: Fill inflatable with air until it is firm and solid. If there is any straining at the seams, the item is over inflated. If any seam begins to strain, immediately stop inflation and release air to reduce the pressure until all signs of stress on the inflatable are gone. DO NOT use the inflatable if there is straining at the seams. Use of an over-inflated item may result in serious injury, paralysis or death. 5. The flexible tubing from the water blaster should be inserted into the hole of the float so that it submerses in the pool water. BANZAI 59073 20120910 5
Use Instructions, After Use and Storage How to play Climb aboard the Ahoy Matey Pirate Ship if you dare! With your pick of weapons (the sword or water-blaster), you ll easily scare off all of your enemies. Or, steer your ship back to land and search for buried treasure. Either way, you and your friends are guaranteed to have a jolly good time! 1. When this product is completely dry carefully deflate it. 1. Pull out the water blaster and tubing from the hole of this product after deflating. 2. When this product is completely dry, carefully roll it up and store in a secure location away from children. Do not store it indoors or in a closed container until it is completely dry. 2. 6 BANZAI 59073 20120910
DO NOT RETURN TO STORE THIS PRODUCT CANNOT BE RETURNED FOR A REFUND AFTER IT HAS BEEN UNPACKED AND USED. FOR QUESTIONS OR PROBLEMS WITH THIS PRODUCT, PLEASE CONTACT CUSTOMER SERVICE AT CUSTOMERSERVICE@TOYQUEST.COM PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. COLORS AND CONTENTS MAY VARY. LOS ANGELES, CA 90064. ALL RIGHTS RESERVED MADE IN CHINA www.toyquest.com