Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual valve details. ounting: Through-holes in sub-base, threaded. Port Sizes: 1 / ISO#1 3 /8 ISO# 1 / ISO#3 3 / ISO# Operating Pressure: 16 bar (3 psig) for VD bases 10 bar (1 psig) for Universal bases Operating Temperature: -1 º to +80 º ( º to +176 º ) for VD bases -1 º to +0 º ( º to + º ) for Universal bases aterials: Diecast aluminium, steel cap head screws and nuts, nitrile rubber seals. Ordering Information To order select model number, e.g. /P19137 for the Bottom Ported ISO#3 Single Station Sub-base. or VD 3 Sub-bases,quote the required number of bases together with one nd Plate ssembly per island, e.g. off Q/3/3/1 together with 1 off Q/3/3/ for a station valve island. or Universal Sub-bases, quote the required number of bases together with two Single nd Plates per island, e.g. off Q/1/3/7 with 1 off Q/1/3/8 and 1 off Q/1/3/31 for a station valve island. ll Sub-bases and nd Plates are supplied complete with the appropriate seals, nuts and bolts.the interface gaskets and body to base fixing bolts are supplied with individual valve bodies. or technical data on ISO 99-1 interface valve ranges see following sections: ISO STR..18 UTO STR..186 U/000..171 N/**..187.01
VD 3 Base Range, -ported version VD 3 orm orm B orm orm D orm Single Station Sub-base Single Station Sub-base odular Sub-base odular Sub-base Directional ylinder Side Ported Bottom Ported Bottom Ported 1) nd Plates () Port Device (90 ) ISO #1 models /P196 /P19 Q/1/3/1 Q/1/3/ P 8361 ISO # models /P1913 /P19131 Q/3/3/1 Q/3/3/ P 861 ISO #3 models /P19138 /P19137 Q/3/3/1 Q/3/3/ P 861 ISO # models /P191 /P1913 Q/6/3/1 Q/6/3/ P 8661 1) Pilot ports on side VD 3 Base Range, NPT-ported version VD 3 orm orm orm D Single Station Sub-base odular Sub-base odular Sub-base Side Ported Bottom Ported 1) nd Plates () ISO #1 models /P196 Q/1/3/1 Q/1/3/ ISO # models /P1913 Q/3/3/1 Q/3/3/ ISO #3 models /P19138 Q/3/3/1 Q/3/3/ 1) Pilot ports on side ccessories to VD 3 Base Range Transition plate Blanking disk ) Blanking Platte 3) ISO #1 models Q/1/3/ #1 # P 838 Q/1/3/3 ISO # models Q/3/3/ # #3 P 88 Q/3/3/3 ISO #3 models Q/3/3/ #3 # P 88 Q/3/3/3 ISO #3 models Q/3/3/3 #3 #1 Q/6/3/3 ) or ultipressure systems 3) an be used on Universal base too. Overview odel Type ISO Size Port Size Pilot Port Size Weight /P196 Single Station Sub-base Side Ported #1 1/ 1/8 0.16 (0.3) /P1913 Single Station Sub-base Side Ported # 3/8 1/8 0.8 (0.6) /P19138 Single Station Sub-base Side Ported #3 1/ 1/8 0.36 (0.79) /P191 Single Station Sub-base Side Ported # 3/ 1/8 0.98 (.16) /P196 Single Station Sub-base Side Ported #1 NPT1/ NPT1/8 0.16 (0.3) /P1913 Single Station Sub-base Side Ported # NPT3/8 NPT1/8 0.8 (0.6) /P19138 Single Station Sub-base Side Ported #3 NPT1/ NPT1/8 0.36 (0.79) /P19 Single Station Sub-base Bottom Ported #1 1/ 1/8 0.19 (0.) /P19131 Single Station Sub-base Bottom Ported # 3/8 1/8 0.3 (0.70) /P19137 Single Station Sub-base Bottom Ported #3 1/ 1/8 0.0 (0.88) /P1913 Single Station Sub-base Bottom Ported # 3/ 1/8 0.7 (1.8) Q/1/3/1 odular Sub-base Bottom Ported #1 1/ 1/8 0. (0.3) Q/3/3/1 odular Sub-base Bottom Ported # 3/8 1/8 0.36 (0.79) Q/3/3/1 odular Sub-base Bottom Ported #3 1/ 1/8 0.7 (1.8) Q/6/3/1 odular Sub-base Bottom Ported # 3/ 1/8 1.0 (3.08) Q/1/3/1 odular Sub-base Bottom Ported #1 NPT1/ NPT1/8 0. (0.3) Q/3/3/1 odular Sub-base Bottom Ported # NPT3/8 NPT1/8 0.36 (0.79) Q/3/3/1 odular Sub-base Bottom Ported #3 NPT1/ NPT1/8 0.7 (1.8) Q/1/3/ odular Sub-base nd Plates () #1 3/8 0. (0.8) Q/3/3/ odular Sub-base nd Plates () # 1/ 0.3 (0.7) Q/3/3/ odular Sub-base nd Plates () #3 1 0.66 (1.) Q/6/3/ odular Sub-base nd Plates () # 1 1.30 (.86) Q/1/3/ odular Sub-base nd Plates () #1 NPT3/8 0. (0.8) Q/3/3/ odular Sub-base nd Plates () # NPT1/ 0.3 (0.7) Q/3/3/ odular Sub-base nd Plates () #3 NPT1 0.66 (1.) or dimensions and drawings see next page. N/**..187.0
I ISO 99-1 Sub-bases VD 3 Sub-base Options Single Station Sub-base Side Ported (orm ) P 1 D Q Single Station Sub-base Bottom Ported (orm B ) B */P196 */P1913 */P19138 /P191 Dimension ISO#1 ISO# ISO#3 ISO# 8 (1,88) 7 (,8) 71 (,8) 8 (3,0) I 1 3 O N B, (0,) 6 (0,) 6,6 (0,6) 9 (0,36) 1 / ( or NPT) 3 /8 ( or NPT) 1 / ( or NPT) 3 / D 1 /8 ( or NPT) 1 /8 ( or NPT) 1 /8 ( or NPT) 1 /8 3 (1,8) 0 (1,60) 3 (1,8) (1,68) 10 (0,0) 13 (0,) 18 (0,7) 19 (0,76) 11,3 (0,) 1 (0,6) 17 (0,68) 19 (0,76) 3, (0,9) 30 (1,0) (0,88) 30 (1,0) I 110 (,0) (,96) 19 (,96) 186 (7,) (0,96) 30 (1,0) 3 (1,8) (1,68) 3 (1,7) 6 (,) 68 (,7) 90 (3,60) 8 (,3) 7 (,96) 90 (3,60) 111 (,) 98 (3,9) 1 (,8) 136 (,) 170 (6,80) N 8 (3,36) 9 (3,80) 119 (,76) 18 (,9) O 1, (0,8) 6 (1,0) 17 (0,67) (0,88) P 11, (0,) 1 (0,) 17 (0,67) (0,88) Q (,16) 6 (,) 7, (,93) 99, (3,91) * Insert for -ported version or for NPT-ported version. Q O D I P 3 1 B 1 N /P19 /P19131 /P19137 /P1913 Dimension ISO#1 ISO# ISO#3 ISO# 6 (1,8) 6 (,8) 71 (,8) 8 (3,0) B 7 (0,8) 8 (0,3) 10 (0,0) 1 (0,60) 3 (0,9) 7 (1,08) 3 (1,36) 0 (1,60) D, (0,) 6,6 (0,6) 6,6 (0,6) 9 (0,36) 1 / 3 /8 1 / 3 / 1 /8 1 /8 1 /8 1 /8, (0,) 6,6 (0,) 6,6 (0,6) 9 (0,30) 30 (1,0) 3 (1,0) 3 (1,8) 8 (1,) I 10 (0,0) 13 (0,) 18 (0,7) 19 (0,76) (0,0) 6, (0,) 9 (0,36) 9, (0,38) 110 (,0) (,96) 19 (,96) 186 (7,) (0,88) 8 (1,) 3 (1,36) (1,80) 6 (1,8) 6 (,) 68 (,7) 90 (3,60) N 6 (,8) 73 (,96) 90 (3,60) 111 (,) O 98 (3,9) 1 (,8) 136 (,) 170 (6,80) P 8 (3,36) 9 (3,80) 119 (,76) 18 (,9) Q (,16) 6 (,) 7, (,93) 99, (3,91) odular Sub-bases and nd Plates (orm and D ) T D +(n x ) B+(n x ) 1 /8 ( or NPT) 1 1 1 1 3 3 O P Q S S R Sub-base Q*/1/3/1 Q*/3/3/1 Q*/3/3/1 Q/6/3/1 nd Plates Q*/1/3/ Q*/3/3/ Q*/3/3/ Q/6/3/ Dimension ISO#1 ISO# ISO#3 ISO# (1,76) (,08) 60 (,0) 60 (,0) B (0,88) 6 (1,0) 30 (1,0) 30 (1,0) 3 (1,7) 6 (,8) 71 (,8) 8 (3,8) D 11 (0,) 13 (0,) 1 (0,60) 1 (0,60) 1, (0,06) (0,0) 6 (0,) 8 (0,3) 7, (0,30) 6 (0,) 8 (0,3) 9 (0,36) (0,88) 6 (1,0) 30 (1,0) 30 (1,0) 8 (1,) 3 (1,0) (,08) 6 (,8) I 7 (0,8) 9 (0,36) (0,8) (0,8) 8, (0,3) 9 (0,36) 10 (0,0) 10 (0,0) 6 (1,0) 30 (1,0) 38 (1,) (,0) 1 / ( or NPT) 3 /8 ( or NPT) 1 / ( or NPT) 3 / ( or NPT) O 6 (1,8) 7 (1,88) 6 (,) 8 (,3) P 1 (0,8) (0,88) 31 (1,) 8 (1,) Q (0,96) (0,96) 3 (1,36) 8 (1,) R 110 (,0) 13 (,0) 190 (7,60) 1 (8,60) S 8 (1,) 3 (1,36) (,08) (,16) T 3 /8 ( or NPT) 1 / ( or NPT) 1 ( or NPT) 1 Inclusive of screws, nuts, washers and O-Rings. * Insert for -ported version or for NPT-ported version ll dimensions in mm (inch)! N/**..187.03
Directional ylinder Port Device (orm ) odel No. P8361 P861 P891 P8661 Dimension ISO#1 ISO# ISO#3 ISO# 1 / 3 /8 1 / 3 / B 19 (0,7) 3 (0,89) 7 (1,0) 33 (1,8), (0,1) 6,6 (0,) 9 (0,3) 9 (0,3) D 10 (0,39) 11 (0,) 1 (0,8) 1 (0,8) 13 (0,0) 1 (0,8) 19 (0,7) 6 (1,01) 7, (0,30) 6 (0,) 8 (0,31) 9 (0,3) 71 (,76) 86 (3,3) 130 (,07) 1 (,3) 3 (0,11) 3 (0,11) 3 (0,11) 3 (0,11) I 110 (,9) 13 (,6) 190 (7,1) 1 (8,38) (0,6) 1 (0,) 17 (0,66) 3 (0,89) 37 (1,) 0 (1,6) (1,7) 6 (,3) (0,97) 6 (1,01) 9 (1,13) (1,71) (0,8) 9 (1,13) 36 (1,) 1 (1,60) N (1,6) (,1) 70 (,73) 80 (3,) O 1, (0,06) (0,19) 6 (0,) 8 (0,31) P 9 (3,70) 11 (,8) 168 (6,) 18 (7,16) Q 1, (0,0) 1, (0,0) 1, (0,0) 1, (0,0) R,7 (0,) 6,8 (0,6) 9 (0,3) 9 (0,3) Weight 0.3 (0.77) 0.70 (1.) 1.0 (.88).60 (.73) Inclusive of screws and O-Rings. Transition Plate odel No. Q/1/3/ Q/3/3/ Q/3/3/ Q/3/3/3 Dimension ISO#1 # ISO# #3 ISO#3 # ISO#3 #1 (0,97) 0 (1,6) 0 (1,6) 3 (1,36) B 6 8 6 8 10 8 Weight 0.3 (0.77) 0.6 (1.) 0.90 (1.98) 0.60 (1.33) Inclusive of screws, washers and O-Rings. ll dimensions in mm (inch)! N/**..187.0
Universal Base Range odular Sub-base Single nd Plate Single nd Plate Transition Plate Blanking Disk Side and Bottom Ported ll Ports closed nd Ports open ISO #1 models Q/1/3/7 Q/1/3/8 Q/1/3/31 Q/1/3/9 #1 # /P3173 ISO # models Q/3/3/7 Q/3/3/8 Q/3/3/31 /P317 odular Sub-base B N 1 Side and Bottom Ports. Pilot ports on bottom. Inclusive of screws, nuts, washers, O-rings and two plugs for ports +. odel ISO Size B N Weight Q/1/3/7 #1 106 (,) 3 (1,7) 36 (1,) 9 (3,68), (0,) 1/ 1/8 18 (0,7) 6 (,6) 11, (0,) (0,8) 3 (0,90) 0.16 (0.3) Q/3/3/7 # 0 (,80) 6 (,) 6 (1,8) 10 (0,8) 6, (0,6) 3/8 1/8 (0,96) 68 (,7) 19 (0,76) 1 (0,60) 9 (1,1) 0.3 (0.77) Single nd Plates odel onnections Q/1/3/8, Q/3/3/8 Q/1/3/31, Q/3/3/31 ll ports closed nd Ports open 1 1 1 onnections can be in end, bottom or top. Drill dimension for opening the ports: ø 8 mm drill for 1 / port ø 1 mm drill for 3 /8 port ø 1 mm drill for 1 / port B Inclusive of screws, nuts, washers and O-rings. T Note: These nd Plates can also be used as Intermediate Supply and xhaust odules! odel ISO Size B T Weight Q/1/3/8, Q/1/3/31 #1 106 (,) (0,88) 36 (1,) 9 (3,68), (0,) 3/8 1/ (1,76) (1,00) 9 (0,36) 0.13 (0.8) Q/3/3/8, Q/3/3/31 # 0 (,80) 9 (1,16) 6 (1,8) 10 (,08) 6, (0,6) 1/ 1/ 8 (,3) 31 (1,) 7 (0,8) 0.3 (0.0) Transition Plate ISO #1 # Blanking Plate or ultipressure systems! 11 6 0 odel Weight Q/1/3/9 0.3 (0.0) Inclusive of screws, nuts, washers and O-rings! odel ISO Size Weight /P3173 #1 0.01 (0.0) /P317 # 0.03 (0.06) ll dimensions in mm (inch)! N/**..187.0
Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/**..187.06