Stealth-12 Owners Manual
About Us Table of Contents You re an avid fisherman, getting your first cast in before the sun starts its day. Or maybe you re an adventurer/explorer extraordinaire, mapping out every corner of every body of water the globe has to offer. Perhaps you re a fitness nut looking for new exciting ways to improve your physique. Whatever the reason, you re a seafarer, and the kayak is the ideal vessel for you. Since 1999, Malibu Kayaks has designed high-quality, affordable kayaks for hardcore enthusiasts and curious parties alike. Recreational paddlers love our kayaks, anglers swear by our angler kayaks, and fitness experts enjoy riding the waves on a Malibu Kayaks surf ski. For over a decade we ve created kayaks based on what s important to the kayaker. It s been that way since our humble beginnings. Look for these icons for more information or to purchase accessories: Instructional Video Installation Manual Shop: http://www.codpaddlesports.com/ Copy this link for our Installation Videos and Instructional Manuals: http://www.malibukayaks.com/customer-support/ Getting To Know Your Kayak...1 Anatomy...2 Kayak Packages...4 -Gator Hatch...5 -Adjustable Footrest Pedals & Flush Mount Rod Holder...10 -Center Track...12 -Side Track...14 -Side Bungee Carry Handles...16-3 Piece Hatch...18-6 Round Hatch...24 -X-Seat...26 -Seat Tray...36 -Rectangular Hatch...38 -Backwell Storage/Drain System...40 -Kayak Brass Inserts...42 -Rudder Kit/Motor Inserts...42 -Intake Strainer...44 -Transducer Inserts...44 Optional Features -Trolling Motor Mount...46 -Universal Rudder Kit... 46 -X-Tank...48-4 Round Hatch...52 Transportation...54 INSTALLATION MANUALS INSTRUCTIONAL VIDEOS Maintenance...55 Repair...56 Storage...57 Safety...59 Replacement Parts & Optional Accessories...60 Warranty...62 Expedite Claim...63
Getting To Know Your Kayak Anatomy A kayak has basic features. The front of the kayak is the bow and the rear is the stern. When sitting in the kayak, facing the bow, the left side of the kayak is port and the right side of the kayak is starboard. The hull ID number (KPO sticker) can be found on the starboard side of the kayak at the stern. Port Bow Starboard Soft Grip Handle 1.5 Buckle The gator hatch is one of our patented designs, that allows full access to the hull while providing additional bungee storage and a child seat. In the middle of the boat, there is a cockpit area with foot wells (toward the bow) and a seating area (towards the stern). Inside the cockpit, there are holes that go all of the way through the kayak called scuppers. These scuppers allow the kayak to drain. In the center of the kayak there is the 3 piece hatch that can be used for storage, a livewell bait tank, and a standing platform. The rectangular hatch allows access to the inside of the kayak for extra storage. Like many of our models, the Stealth-14 is equipped with a backwell bungee storage, which is an ideal placement for a 5 gallon live bait bucket. It can also be used as storage for any gear you wish to bring on board and hold securely with our sturdy bungee cord. Threaded eyelets are installed along the rails of the kayak to attach numerous accessories e.g. seat, tackle box, dry bag, etc. Your kayak also has a designed drain system to drain out any water that s inside of the kayak hull. Cockpit Bungee Storage Gator Hatch Seat Scupper Hole Center Track Adjustable Footrest Pedals 6 Hatch Oval Hatch Bungee Side Carry Handle w/ Paddle Holder Front Strap Seating Eyelet 6 Hatch X-Seat Seating Area Threaded Eyelet Flush Mount Rod Holder Back Well Trolling Motor Mount Inserts Rectangular Hatch 5 Gal. Bucket Placement Nylon Bungee Hook Hull Drainage Stern Rudder Kit/Motor Inserts 1 2
Stealth-12 Kayak Packages The Stealth-12 steps up as the well-balanced fishing machine to tackle the fearsome waters. Mid-sized option in our patented Stealth Series comes fully equipped with a Gator Hatch and Center Bait Tank System. Specifications Length: 12 4 Width: 33 Depth: 12 Weight: 57 lbs Max Capacity: 450 lbs The weight stated above is only the base weight. The actual weight of the kayak may vary by accessories on other packages. Packages Fish Finder Standing Platform Large Storage X-Seat Livewell Tank Fish and Dive Rigged, set, and ready to go! Our Fishing and Diving packages come equipped with all the rod holders and hatches you ll ever need. Never fear though, there is still plenty of room left for you to install even more. Fish and Dive Package (overall weight: 86 lbs.) Includes: X-Seat Center Bait Tank Gator Hatch V.3 12 Aluminum Recessed Center Track 18 Aluminum Recessed Side Track (x2) Rectangular Hatch (Stern) 6 Hatch Bungee Storage (Stern) Stern Rod Holders (x2) Rope Carry Handles (Bow & Stern) Bungee Side Carry Handles w/ Paddle Holders (x2) Adjustable Footrest Standing Platform Drain Plug Rudder Inserts 3 4
Stealth- 12 Gator Hatch Gator Hatch Seat (PCM-1911) Child Seat Gator Hatch also provides a patented design seat so your little one can safely join you on board. Gator Hatch Lid Unleash the bungee cord attached to the Gator Hatch Lid for an easy access to dry compartment. 5 6
Stealth- 12 Gator Hatch 1.5 Buckle (PM-1503R) Shock Cord Cleats (PM-1553R) Gator Hatch Bungee Storage (FM-2211R) Gator Hatch Base Lid and Removable Tray Remove Gator Hatch Base Lid to store equipment and your catch of the day in the spacious Gator Hatch Tray. Hull Storage The inside of your kayak can be used to store your equipment before or after your fishing trip. Simply lift the Gator Hatch Tray to access the kayak hull for large storage. 7 8
Stealth- 12 Adjustable Footrest Pedals & Flush Mount Rod Holder a d j u s t press Adjustable Footrest Pedals (PM-1556R) Adjustable Footrest Pedals Foot pedals can easily be adjusted by sliding them across the track. Press/ hold to lift the lever tab and adjust the slide pedal across track for a comfortable position. Flush Mount Rod Holders (PCM-1922R) Flush Mount Rod Holder Mount your gear into one of the fishing rod holders to free your hands and bait a fishing hook. Our Accessory Leash can attach your fishing rod securely to any flush mount rod holder. 9 10
Stealth- 12 Kayak Tracks Center Track 12 Aluminum Recessed Track (MM-4182) Center Recessed Track The 12 Center Recessed Track is specifically designed to mount Scotty and RAM products. 11 12
Stealth- 12 Kayak Tracks Side Recessed Tracks The 18 Side Recessed Tracks are specifically designed to mount Scotty and RAM products. Side Tracks 18 Aluminum Recessed Track (MM-4183) 13 14
Stealth- 12 Side Bungee Carry Handles Side Bungee Carry Handle (PCM-1938R) Side Bungee Carry Handle The side bungee carry handles can be utilized to strap down your paddle. Simply wrap the bungee cord over your paddle and attach it to the nylon lashing hook. Side Bungee Carry Handle Carry your kayak using the side carry handles. 15 16
Stealth- 12 3 Piece Hatch Livewell Bait Tank (PC-1148) Livewell Bait Tank Ideal for fresh live bait and a place to keep catch-and-release fish. Purchase the livewell pump kit for the stealth series and download the instructional manual for installation. Bait Tank Strainer Strainers keep fish contained in the livewell bait tank while filtering out old water. 17 18
Stealth- 12 3 Piece Hatch Standing Platform (PCM-1917S) Standing Platform Patented center standing platform is stable enough for casting your fishing line or stand up paddling. 19 20
Stealth- 12 Clear Hatch Clear Hatch (PCM-1920) Removable Bucket Clear Hatch Instead of opening the oval hatch, use the clear T-Handle to lift the clear hatch to reach into the livewell for bait. This will keep your bait secure in rough waters during your kayaking fishing trip. Removable Bucket The bucket inside the Center Bait Tank is removable; this provides access to the Center Bait Tank. 21 22
Stealth- 12 6 Round Hatch 6 Round Hatch Turn hatch counterclockwise to lift the lid to gain access to the center bait tank. 6 Round Hatch (PCM-1910R) 23 24
X-Seat Seat Adjustments Malibu Kayaks PUSH 3D Mesh Center Hinge Button Recline the X-Seat in 2 easy steps. 1. Push in the center hinge buttons 2. Lean backward or pull seat back forward Seat Adjustment Hinge Side Strap Built In Casting Post Front Buckle UNLOCK PUSH LOCK Front Leg Single Hand Adjustments To put the X-Seat in a permanent unlock mode, perfect for 1 handed adjustments, push in the Center Hinge Button and turn dial counterclockwise until you hear a click. To take the X-Seat out of this mode, rotate dials clockwise. 25 26
PUSH Stealth- 12 Low Position Front Leg Chair Mount Insert X-Seat s front legs into both Chair Mounts. Front Leg Chair Mount (FM-4000-2) Seat Buckle (PM-1551R) Seat Buckle Lay the X-Seat down flat and secure it to the kayak by clipping the buckle. 27 28
PUSH Stealth- 12 Mid. Position 4 Higher Seating Position Kick Stand Flip kick stand up and insert X-Seat s front legs into groove. Kick Stand (FM-4000-1) Back Steps Back Steps Lay the X-Seat down on top of the back steps and secure the X-Seat to the kayak by clipping the buckle. 29 30
PUSH PUSH Stealth- 12 High Position Malibu Kayaks Seat Buckle From any position lay the X-Seat flat and secure the seat bottom to the seat back by clipping the buckle. High Position 31 32
PUSH Stealth- 14 Casting Position Casting Bar Clips Raise the bottom of the X-Seat and secure it with the buckle to the seat back. Find both clips located on the casting bar and pull them outward. Casting Bar Raise Casting Bar to desired height. Lock the Casting Bar in position by pushing in both clips. 33 34
Stealth- 12 Seat Tray Option Seat Tray Easily interchange your X-Seat with the rotomolded adapter seat by screwing the adapter seat to the hull. Screws Seat Tray (PCM-1948) Universal Seating Adapter seat easily interchanges traditional, soft kayak seats. 35 36
Stealth- 12 Rectangular Hatch To access the rectangular hatch, simply lift the T-handle and twist to the left to unlock. Pull T-Handle to lift the hatch. Rectangular Hatch (Rear) (PCM-1916R) The basket inside is removable; this provides access to the kayak hull which can be utilized for large storage. 37 38
Stealth- 12 Backwell Bungee Storage/Drain System Backwell Bungee Storage It is a perfect place to store any extra equipment you would like to bring on board. Backwell Bungee Storage (FM-2211R) Threaded Eyelet w/ Washer (Hull Drainage) (PM-1552R) Hull Drainage Unscrew threaded eyelet, located near the stern of the kayak, to drain out any excess water from inside the hull. 39 40
Stealth- 12 Kayak Brass Inserts Trolling Motor Mount Inserts Located behind the seating area, these inserts are specifically designed to install our quarter inch cross bar. Trolling Motor Mount Inserts Rudder Kit/Motor Mount Inserts Rudder Kit/Motor Inserts Located at the stern of the kayak, the rudder kit/motor inserts are specifically designed to mount our universal rudder kit. 41 42
Stealth-12 Under the Hull Placement for Intake Strainer Scupper hole for X-Tank s Intake Strainer. Placement for Intake Strainer Transducer Inserts Transducer Inserts Your kayak comes with a Lowrance suited transducer mount located at the bottom of the kayak stern. 43 44
Stealth-12 Optional Features Trolling Motor Mount A long crossbar ( 2 x2 x34 ) made of 1/4 steel, built for easy installation and powder coated to resist the elements. (Includes Hardware) Trolling Motor Mount (MM-4167) Universal Rudder Kit (PCM-1927R) Universal Rudder Kit Steer your kayak hands-free with our durable Universal Rudder Kit. Designed to fit most major brand kayaks that have adjustable foot tracks and the ability to access the hull near the stern of the kayak. All assembly parts, foot pedals, and tracks are included. 45 46
Stealth-12 X-Tank Optional Features Dry Storage Easliy adjust your X-Tank into dry storage. Secure X-Tank with bungee. Rectangular Hatch (Rear) (PCM-1916R) Cooler Easliy adjust your X-Tank into a cooler. Secure X-Tank with bungee. 47 48
Stealth-12 X-Tank Optional Features Battery Compartment Easily adjust the X-Tank to a battery compartment. Secure X-Tank with bungee. Rectangular Hatch (Rear) (PCM-1916R) Livewell Tank Easily adjust the X-Tank to a livewell tank. Secure X-Tank with bungee. 49 50
Stealth-12 Optional Features 4 Round Hatch Install our 4 round hatch to get interior access for additional hardware installation projects like rudders or a trolling motor. (Includes Hardware) 4 Round Hatch (PCM-1909) 51 52
Stealth-14 Transportation Tie Down Straps and Roof Rack Pads are available on codpaddlesports.com Step 1 Step 3 Step 2 Step 1 1 2 Step 2 After strapping down your kayak to your roof rack make sure to strap it down to the front and back bumper of your vehicle. Tie one end of the strap to front carry handle and the other end to your tow hook. This will prevent your kayak from swaying while making turns. Pull Strap under rack. Throw both ends of strap over kayak 3 4 Step 3 Tie one end of the strap to the stern carry handle and the other end to your vehicle back bumper. Pull loose end under rack. Insert loose end into buckle and tighten gently. NOTE: Avoid over-tightening any of the straps holding your kayak in place. Too much tension could potentially distort the hull. 53 54
Maintenance Repair After every use, it is recommended to thoroughly rinse your kayak with water. Make sure to rinse foot pegs and all hardware with plenty of fresh water after paddling in saltwater, brackish or polluted water. Kayak Wash Recommended supplies: - Bucket - Sponge - Soft cloth - Garden hose - Wash soap solution In preparation, fill your bucket with water and add a cap or two full of soap. Next, find a clean and flat area to wash your kayak. Utilize kayak cradles or stands if you have them, if not, a deck or grassy lawn works great. Patching Holes Super linear polyethylene is very durable and can be repaired if the need arises. Cracks or deep gouges can be welded with a suitable heat gun and resin powder. Marine goop is also a very inexpensive way to seal a pin-hole leak or other small patching areas. Instructions for Patching Holes: Be sure NOT to leave soldering iron in one area too long; you can burn a hole in your kayak. The cooling process takes about 10 minutes. Test area when finished. In some cases you might need to add a second application depending on the size of the repair. Items needed: color plastic to match your kayak and a pencil-grip soldering iron (Approximately 25 watt). 1 2 First, wash down the kayak with your garden hose to remove any surface dirt, pollen, debris, sea salt, etc. While the kayak is still wet, take your sponge and soak it in the soap/water solution. Wash down the entire kayak with the soap/ water solution. This will remove any stubborn dirt and debris. Be careful not to remove decals while scrubbing your kayak. After you scrub down the surface with soap/water solution, rinse down the kayak with your garden hose again to remove any excess suds. Remove threaded eyelet that is located near the stern to drain out any excess water that might be inside the hull. Let your kayak air dry, or towel dry the surface if you prefer. Turn your kayak over and make sure the hull is completely dry. Use a hot soldering iron to melt a piece of plastic. Apply consistently around the patching area. 3 h inside crack or hole and surround Patch inside crack or hole and surrounding area, leaving a little extra for finishing. If crack is deep let the patching dry then apply another layer. Kayak UV Protection As a finishing touch, to prevent damages from harmful UV radiation we suggest a quality UV protection. 303 Aerospace Protection can be applied as a sunscreen for your kayak. Smooth over with soldering iron and Smooth over with soldering iron and finish surface with shaver. Installation manual is available Repair Kit is available on codpaddlespots.com 55 56
Storage Storage Storage Do s Storage Don t s Storing your kayak cockpit side up on cross bars can dent the bottom. Always store your kayak indoors or under cover to protect from harsh weather, direct sunlight and other elements. On its side over a long period of time it can deform or dent the sides. Storing your boat upside down on crossbars or hanging from wide strapping around the cock pit area are the best ways to keep the kayak stored. Never hang the kayak by handles or by the scuppers. It will distort the kayak hull. You could also store your kayak on its stern standing against a wall. Make sure to strap your kayak to prevent it from tipping over. Never use a wheel cart as a storage platform for your kayak. A wheel cart should only be used for transportation. 57 58
Safety Kayak Safety Suggestions There are basic safety rules that all kayakers should follow. Get paddlesports instructions from a licensed or certified instructor. Obtain certified first aid and rescue training and carry first aid rescue equipment. For your first time on a kayak we recommend beginning in calm water. You can get the feel of the kayak and distributions of your weight. Practice getting in and out of the kayak until you re comfortable. Never exceed the weight capacity of your kayak; check your equipment for wear and tear before you paddle. Contact our technical support before making any modification to your kayak. Always do the following checkup before launching your kayak: Always - Wear a Coast Guard approved personal flotation device - Dress appropriately for weather conditions; cold water and/ or weather can result in hypothermia; apply sunscreen and other sun protective clothing - Inspect your equipment prior to each use for signs of possible wear or potential failure. - Tie a leash to your paddle - Always carry a spare paddle - Scout unfamiliar waters - Be aware of river water levels, tidal changes, wind conditions, obstacles in and above the water and weather changes - Always make sure that your hatch is secure - Make sure drain plugs are properly installed - Test the rudder kit system (if applicable) - Test the navigation device (if applicable) Never - Never go alone and always file a float plan - Never go in flood and/or fast moving water conditions - Never exceed your ability and be aware of your limitations - Never use alcohol or mind-altering drugs prior to or while using this product - Never open your hatches in unstable water conditions - Never remove the foam pieces inside the hull. They are installed for additional flotation and safety reasons. (If applicable) Replacement Parts and Optional Accessories The list below refers to a specific category for each replacement part and accessories that you can find at http://www.codpaddlesports.com/ Replacement Parts X-Seat-FM-4000 X-Seat-Front Leg Boot-FM4000-2 X-Seat-Kickstand-FM-4000-1 Fishing Gear Flush Mount Fishing Rod Holder - PCM-1922R Handles Soft Grip Carry Handles - PCM-1938R Side Bungee Carry Handles - PCM-1906R Hardware Parts 1.5 Buckle Set - PM-1503R Bungee Cord Kit - FM-2211R Nylon Lashing Hook - PCM-1921R Shock Cord Cleat - PM-1553R Square Handle Washer - PCM-1905R Threaded Eyelet - PCM-1550R Threaded Eyelet with Base - PM-1551R Threaded Eyelet with Washer - PM-1552R Hatches Gator Hatch V3 - PM-1530 3 Piece Hatch - Side Hatch - PCM-1917S 3 Piece Hatch - Side Hatch Dry Bag - PCM-1917B 3 Piece Hatch - T-Handle - PCM-1917C 6 Round Hatch with Bucket - PCM-1910R 8 Round Hatch with Bucket - PCM-1911R Gator hatch Trim Seal, Top Gasket - PM-1524R Oval Center Bait Hatch with Clear Cap - PCM-1917-2R Small Rectangular Hatch With Removable Bag - PMC-1916R Misc. Parts Adjustable Foot Peg System - PM-1556R 6 Aluminum Recessed Track - MM-4181 12 Aluminum Recessed Track - MM-4182 59 60
Replacement Parts and Optional Accessories Warranty Optional Accessories Fishing Gear 5 Gal. Bucket with Pump Kit - PCM-1934 Hatches 4 Round Hatch - PCM-1909R Pump Kits Livewell Pump Kit - Stealth Series PC-1148 Rudder Kit Universal Rudder Kit - PCM-1927R Transportation Gear Tie Down Straps - FCM-2400R Multi-Purpose Roof Rack System - FC-2001 Trolling Motor Mount - MM-4167 X-Tank X-Tank-Black- EC-4008 Limited Lifetime Warranty Visit our website to fill out the form and please print a copy for yourself. Crack of Dawn Paddle sports dba Malibu Kayaks warrants, as a limited lifetime warranty, this kayak purchased is to be free of manufacturing defects in workmanship and materials from the original date of consumer purchase. This warranty is effective as long as there is proof of purchase from an authorized Malibu Kayaks dealer and applies only to the original owner. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Malibu Kayaks reserves the right to choose the final warranty resolution. The option to repair or replace parts of a given kayak is determined against damages and in the discretion of Malibu Kayaks. Some exclusions may apply. This warranty is valid only in the U.S.A. Malibu Kayaks is not liable for any injury or damage to person or property sustained as a result of the use of kayaks manufactured by Malibu Kayaks. The user of any such kayak acknowledges and assumes any and all risk associated with the use of such kayak including death, waives any and all claims against Crack of Dawn Paddlesports dba Malibu Kayaks, its agents and assigns. Malibu Kayaks reserves the right to change its products without notice while not incorporating those changes into completed and purchased products in the possession of dealers or consumers. This Warranty Does Not Cover The Following: 1. Normal wear and tear or as a result of abuse or failure to maintain kayak. 2. Discoloration due to excessive sun exposure. 3. Damage caused by alterations, modifications, storage or mooring to kayak. 4. Transportation of kayaks; significant or incidental damage to kayak and/or personal property. 5. Damage due to failure of following procedures and instructions provided. 6. Kayaks purchased from an unauthorized dealer or consumer resale. 7. Factory 2nds (Kayaks purchased as a blem). 61 62
Expedite Claim Steps to Expedite Claim In the unlikely event that your kayak has any manufacturing defects, photos, proof of purchase, and description of your claim are required. All warranty claims are subject to any exclusion and in lieu of provided evidence decided upon the discretion of Malibu Kayaks. For all kayak warranty claims visit the link below: http://www.malibukayaks.com/customer-support/ Please fill out our Warranty Claim Form and submit photos or files to Support@malibukayaks.com After receiving the above items, Malibu Kayaks may request to have your kayak returned to the original dealer for inspection. Malibu Kayaks will warrant the right to either exchange or repair your kayak. Depending upon date of purchase and damage to the kayak Malibu Kayaks may repair/replace kayak, some fees may apply. All shipping cost will be paid by customer. If you are unable to get a replacement kayak from an authorized dealer, Malibu Kayaks will ship the warranty replacement kayak (shipping fees will apply). Kayak serial # must be cut and mailed to Malibu Kayaks to finalize all kayak replacement claims. Once your claim is approved you may be required to provide proof of disposal of your original kayak. Please do not dispose of your kayak prior to your claim being approved. Exclusions Kayaks that are structurally altered or subjected to stress beyond the physical limits of the materials used in hull or components, or damaged as a result of abnormal use are considered as damage done by the user and void of Malibu Kayaks warranty. Warranty does not cover un-recommended/unauthorized alterations or unauthorized repair. Warranty and Replacement Parts Any part/parts replaced or repaired hereafter shall be warranted as an original part/parts purchased by the consumer. 63 64
www.malibukayaks.com 7110 E Jackson St. Paramount, CA 90723 T: 562.630.6282