001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) Chemical family: Mixture. Product uses: Anti spatter. Solvent Based Anti Spatter (Aerosol) Manufacturer emergency phone number: Section 1: PRODUCT INFORMATION Manufacturer: KCI Inc. 3710 N. Davidson St. Charlotte, N.C. 28205. Chemtrec 800 424 9300. Information phone number: 704 372 8435 TDG classification: Supplier: Same as manufacturer. AEROSOLS UN1950 Class 2.2. Revision Date: 2014/02/07 WHMIS classification: A, D1B, D2A, D2B. DSL status: Appears on DSL. Supplier MSDS date: 2012/08/10. Section 2: HAZARDOUS INGREDIENTS C.A.S. CONCENTRATION % Ingredient Name T.L.V. LD/50 LC/50 124 38 9 17 CARBON DIOXIDE 5000 PPM NOT AVAILABLE 361 GM/M3/2H 200,000 PPM/2H 75 09 2 73 84 METHYLENE CHLORIDE 50 PPM 985 MG/KG RAT ORAL 873 MG/KG MOUSE ORAL 2000 MG/KG RABBIT ORAL 470,000 PPM/30M RAT INHALATION 14400 MG/KG 52000 MG/M3/6H RAT INHALATION Physical state: Liquid (aerosol). Appearance & odor: Chloroform like odor. Clear to white. Odor threshold (ppm): Not available. Section 3: PHYSICAL DATA 1620 16 001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) 1/5
Vapour pressure (mmhg): 390 Vapour density (air=1): 2.9 Volatiles (%) By volume: Not available. By weight: Not available. Evaporation rate (butyl acetate = 1): 14.50 Boiling point ( C): 40 C Freezing point ( C): Not available. ph: Not available. Specific gravity @ 20 C: 1.32 Solubility in water (%): 1.3 Coefficient of water\oil dist.: Not available. VOC: Not available. Flammability: Not flammable. Section 4: FIRE & EXPLOSION DATA Conditions of flammability: Heat, sparks and open flames. Red hot metal. Extinguishing media: Dry chemical. Class B extinguishing agent. Universal aqueous film forming foam. Special procedures: Firefighters should wear the usual protective gear. Wear a self contained breathing apparatus. Use water spray to cool fire exposed containers. Auto ignition temperature ( C): Not available. Flash point ( C), method: None to boiling point. Lower flammability limit (% vol): Upper flammability limit (% vol): Explosion Data Not available. Not available. Sensitivity to static discharge: Not available. Sensitivity to mechanical impact: Contents under pressure. Hazardous combustion products: Not available. Explosive power: Contents under pressure. Do not use or store near heat or open flame. 1620 16 001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) 2/5
Chemical stability: Product is stable. Section 5: REACTIVITY DATA Conditions of instability: Heat, sparks & open flame. Electric arc. High pressure in aluminum system. Red hot metal. Hazardous polymerization: Will not occur. Incompatible substances: Aluminum (Al). Potassium (K). Sodium (Na). Oxygen (O2). Peroxides. Reactive metals. Oxidizers. Strong oxidizing agents. Nitrogen. Hazardous decomposition products: Phosgene. Hydrochloric acid. Oxides of carbon. Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Inhalation, skin and eye contact. Skin absorption. Effects of acute exposure Eye contact: May cause tearing. May cause redness and pain. May cause burning. May cause swelling. Skin contact: Prolonged contact may cause irritation. Prolonged contact may cause defatting of tissue. Prolonged/repeated contact can cause skin drying. Prolonged contact can cause rash (dermatitis). Skin absorption: May be absorbed through the skin. Inhalation: May cause irritation to the respiratory tract. May cause headache and dizziness. May cause confusion. Staggering gait. May cause central nervous system depression. May cause anaesthesia effects. Ingestion: May cause vomiting. Not a likely route of exposure. May cause irritation of mouth and throat. May cause irritation of the gastrointestinal tract. May cause cramps. May cause irritation of the mucous membranes. Effects of chronic exposure: May cause liver and kidney damage. May cause carboxy hemoglobinemia (impaired ability of the blood to transport oxygen). 1620 16 001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) 3/5
LD50 of product, species & route: 1600 mg/kg rat oral. LC50 of product, species & route: 88,000 mg/m3/30min rat inhalation. Exposure limit of material: Not available for mixture, see the ingredients section. Sensitization to product: Not available. Carcinogenic effects: Methylene chloride is a suspected carcinogen (IARC group 2B). Reproductive effects: Not available. Teratogenicity: Not available. Mutagenicity: None known. Synergistic materials: Not available. Section 7: PREVENTATIVE MEASURES Precautionary Measures Gloves/Type: Solvex gloves. Impervious gloves. Respiratory/Type: None required under normal use. Eye/Type: Safety glasses with side shields. Splash proof chemical goggles. Footwear/Type: Safety shoes per local regulations. Clothing/Type: Wear adequate protective clothes. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: General ventilation. Typically 10 air changes per hour. Local exhaust may be necessary for some handling/use conditions. Leak/Spill: Eliminate all sources of ignition. Soak up with an absorbent material. Wear appropriate protective equipment. Use non sparking tools. Flush spillage area with a lot of water. Place in a labelled container for later disposal. Aerosol no major spill is expected. Waste disposal: In accordance with municipal, provincial and federal regulations. Recycle waste where applicable. Do not incinerate. 1620 16 001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) 4/5
Handling procedures and equipment: Avoid breathing vapors/mists. Wear personal protective equipment appropriate to task. Wash thoroughly after handling. Avoid contact with skin, eyes and clothing. Launder contaminated clothing prior to reuse. Storage requirements: Store away from incompatible materials. Keep containers closed when not in use. Store below 48.8 C (120 F). TDG classification: AEROSOLS UN1950 Class 2.2. Special shipping information: See transportation information. Section 8: FIRST AID MEASURES Skin contact: Wash with water and soap. Remove contaminated clothing. If irritation persists, consult a physician. Apply skin cream if skin is dry. Eye contact: Obtain medical attention. Immediately flush with large amounts of water for at least 15 minutes, lifting upper and lower lids. Inhalation: Remove victim to fresh air. If not breathing, qualified personnel should administer artificial respiration. If breathing is difficult, administer oxygen. If irritation occurs, consult a physician. Ingestion: Do not induce vomiting, seek medical attention. Not considered a potential route of exposure. Never give anything by mouth to an unconscious person. If conscious, give one cupful of water or milk. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety. This MSDS was generated by Conform Plus Application Service. Visit us at www.netmsds.com. 1620 16 001 1620 SOLVENT BASED ANTI SPLATTER (AEROSOL) 5/5