FILTRATION TECHNOLOGY 2 STAUFF Spin On Filters Quality and Service Worldwide
Spin-On Filters Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 2-2 Doyle Avenue, Unanderra Wollongong, N.S.W 252 AUSTRALIA Tel: +1 2 2 71 18 77 Fax: +1 2 2 71 8 2 Brazil Stauff Brasil Ltda. Av. Gupê 177 Galpão 2 Bloco A Barueri São Paulo CEP 22-12, BRAZIL Tel: +55 ()11-789-92 Fax: +55 ()11-789-921 Canada Stauff Canada Ltd. 8 Milner Avenue Scarborough, Ontário M1B 5N7, CANADA Tel: +1 1 282 8 Fax: +1 1 282 9 China Stauff International Trading (Shangai) Co., Ltd. Shangdian Mansion, Pudong 1, Binzhou Road 212 Shangai, CHINA Tel: +8 21 58 5 5 Fax: +8 21 58 5 8 France Stauff S.A. Z.I. de Vineuil-Blois Sud 2, Avenue du Grain d Or 15 Vineuil-cedex, FRANCE Tel: + 2 5 5 55 5 Fax: + 2 5 2 29 19 India Stauff India Pvt. Ltd. Gat. No. 2, Pune-Nagar Road, Wagholi, INDIA IND-Pune - 1227 Tel: +91 2 75 19 9 Fax: +91 2 75 19 89 Italy Stauff Italia S.R.L. Via Pola 21/2, I-2 Birone di Giussano, ITALY Tel: +9 2 1 21 1 Fax: +9 2 55 New Zealand Stauff Corporation (NZ) Ltd. Unit J. 15 Harris Road, P.O. Box 58517 Greenmount Auckland-NEW ZEALAND Tel: + 9 271 812 Fax: + 9 271 82 United Kingdom Stauff UK Ltd. 2, Coleford Road Darnall Sheffield, S 9 5 P H, ENGLAND Tel: + 112 518 518 Fax: + 112 518 519 USA Stauff Corporation 7 Wm. Demarest Place Waldwick, NJ 7, USA Tel: +1 21 78 Fax: +1 21 78 52 Distributors and warehouses in all industrial countries. Walter Stauffenberg GmbH & Co. KG P. O. Box 175 D-58777 Werdohl Germany Im Ehrenfeld D-58791 Werdohl Germany Tel.: +9 () 2 92 9 1- Fax: +9 () 2 92 25 5 E-mail: sales@stauff.com Internet: http://www. stauff.com Stauff Filtration Technology Stauff Filtration Technology offers a complete range of filtration products and services that will provide the system designer or user with the highest level of contamination control demanded by today s most sophisticated applications. Products include pressure filters, return line filters, elements, spin on filters suction strainers, and filler breathers for various hydraulic, lubrication and fuel oils. Stauff has the technical expertise to provide superior filter element designs for the Stauff original filter housings and also for the interchange element market. Stauff manufactures more than 1, different elements. Many of these are designed to fit into filter housings produced by other companies while maintaining or surpassing the original performance. The Stauff Contamination Control Program includes the diagnostic services including fluid sampling and laser particle counting products needed to monitor the system contamination level. Stauff, through its global network of wholly owned companies and technically qualified distributors, is ideally placed to assist its customers in the total contamination process providing a well balanced filtration solution. Spin-On Filters Page Spin On Heads SLF Series SAF Series,5 SSF Series...9 SSFT Series 1,11 Spin On Elements SF Series 12 SF 5 Series 1,1 SF 7 Series 15...18 SFC 5/ Series 19 SFCT 57/58 Series 2,21 Filter Indicators Clogging Indicators 22 Appendix Quick Reference Guide 2 2
Spin-On Filters SLF 2,, Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections Flow rate By-pass valve Clogging indicators Elements BSP, NPT, or SAE O -Ring thread 2 l/min (7 US GPM) for return line, 7 l/min (2 US GPM) for suction line applications 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the element Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SF series elements For element types and flow characteristics see page 12 Mineral oils, other fluids on request Dimensions 77,5 (,5) 1,7 (1,) 28,5 (1,12) 1,2 (,5) 8,1 () Port See table Connection thread / -1 Outlet port sizes See table below ø2,9 (2x) (,98) Inlet port sizes See table below OUTLET INLET 8,1 () ø77,7 (,5) 115,5 (,55) Gauge port (optional) outlet pressure location (suction line) Mounting holes (2x) 1/-2x9,5 (/8 )for NPT and SAE ports M8x9,5 (/8) for BSP ports (1,) Gauge port (optional) inlet pressure location (return line) Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Dimensions in mm (inch) Ordering Code SLF 2 Filter type SLF Port options Code Connection Style 2B BSP G 1 / 2 NPT 1 / NPT B BSP G /8 NPT /8 NPT SAE 9 /1-18 UN Indicator port options No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G 1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF
Spin-On Filters SAF 5,, 7,11 Construction Die cast aluminium head Seals NBR (Buna-N ) Dimensions Port connections Flow rate By-pass valve Clogging indicators Elements BSP, NPT, or SAE O -Ring thread 9 l/min (25 US GPM) for return line, 2 l/min ( US GPM) for suction line applications 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the head Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SF5 series elements For element types and flow characteristics see pages 1...1 Mineral oils, other fluids on request 95 (,75) 8,1 () Port see table (1,75) 22 (,88) Connection thread 1-12 UNF 95 (,75) 28 (9,75) 8 () 7 () 191 (7,51) Mounting holes (2x) 1/-2x17,5 (,7)for NPT or SAE ports M8x17,5 (,7) for BSP ports 1 ø9,2 (,7) clearance for element removal (both element sizes): 19mm (,75) Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Inlet pressure location: 1, (for return line filter) Outlet pressure location:, (for suction filter) Ordering Code Filter type SAF Port options Code Connection Style 5B BSP G 1 /2 5 NPT 1 /2 NPT SAE / -1 UN 7B BSP G / 7 NPT / NPT 11 SAE 1 1 /1-12 UN SAF 7 25 By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) Dimensions in mm (inch) Indicator port options No indicator port 1 Gauge pot drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF
Spin-On Filters SAF 1,1 Construction Die cast aluminium head Seals NBR (Buna-N ) Dimensions Port connections Flow rate By-pass valve Clogging indicators Elements BSP, NPT, or SAE O -Ring thread 128 l/min ( US GPM) for return line, l/min (8 US GPM) for suction line applications 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the head Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SF5 series elements For element types and flow characteristics see pages 1...1 Mineral oils, other fluids on request 92,7 (,5) 8,1 () Port see table,5 (1,8) 2,1 (,91) 1 12 UNF connection thread ø77 (,) 29 (9,8) 19 (7,) OUT IN 5. (1,78) Mounting holes (2x) 1/-2x2.8 (,9) for NPT and SAE inlet and outlet ports M8x2, (,9) for BSP inlet and outlet ports 1 Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Inlet pressure location: 1, (for return line filter) Outlet pressure location:, (for suction filter) 9,2 (,7) Ordering Code Filter type SAF Port options Code Connection Style 1B BSP G1 1 NPT 1 NPT 1 SAE 1 5 /1-12 UN SAF 1 25 By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) Dimensions in mm (inch) Indicator port options No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 5
Spin-On Filters SSF 12 Dimensions Construction Seals Port connections Flow rate By-pass valve Clogging indicators Elements Die cast aluminium head NBR (Buna-N ) seals BSP, NPT, or SAE O -Ring threaded 9 l/min (25 US GPM) for return line, 2 l/min ( US GPM) for suction line applications 12 bar (17 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the head Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SFC5/ series elements For element types and flow characteristics see pages 19...21 Mineral oils, other fluids on request 95 (,75) 8,1 () Port see table (1,75) 22 (,88) Connection G / 95 (,75) 2 (9,21) 8 () 7 () 189 (7,) Mounting holes (2x) 1/-2x17,5 (,7)for NPT or SAE ports M8x17,5 (,7) for BSP ports 1 ø98 (,8) clearance for element removal (both element sizes): 19mm (,75) Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Inlet pressure location: 1, (for return line filter) Outlet pressure location:, (for suction filter) Ordering Code SSF 12 25 Dimensions in mm (inch) Filter type SSF Indicator port options Port options Code Connection Style 12 BSP G / 12N NPT / NPT By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF
Spin-On Filters SSF 2, 1, 12, 1, 1 Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections BSP, NPT, or SAE O -Ring thread Flow rate 225 l/min ( US GPM) for return line, l/min (12 US GPM) for suction line applications 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) By-pass valve Built into the head Clogging indicators Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 Elements For use with SF7 and SFC57/58 series elements For element types and flow characteristics see pages 15...18 for SF7 see pages 2...21 for SFC57/58 Dimensions Mineral oils, other fluids on request 1 (5,2) 1 (2,) 28 (1,1) 5 (1,87) Ports see table below Connection thread 1-1/2-1 UN and G1-1/ (dual spigot) Mounting holes (2x) 5/1-18 UNCx19,1 (,75) for NPT and SAE ports; M1x19,1(,75)for BSP ports outlet port size see table ø1, (5,) Inlet port size see table 287 (11,) OUT IN 57,2 (2,25) 21 (9,5) 1 Ordering Code Filter type SSF ø12 (5,2) Port options Code Connection Style 1 NPT 1 NPT 1B BSP G 1 2L BSP G1 1 / 12L NPT 1 1 / NPT 12 NPT 1 1 / NPT 1 SAE 1 5 /1-12 UN 1 SAE 1 5 /8-12 UN Note: SSF-2Land SSF-12Lfilters use a wide cut or L shaped element seal. All others use a thin cut element seal SSF 12 25 By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Inlet pressure location: 1, (for return line filter) Outlet pressure location:, (for suction filter) Dimensions in mm (inch) Indicator port options No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 7
Spin-On Filters SSF 15, 18 Construction Die cast aluminium head Seals NBR (Buna-N ) Dimensions Port connections Flow rate By-pass valve Clogging indicators Elements BSP, NPT, or SAE O -Ring thread l/min (8 US GPM) for return line, 11 l/min ( US GPM) for suction line applications 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the head Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SF7 series elements For element types and flow characteristics see pages 15...18 Mineral oils, other fluids on request 17,1 (5,) 7,8 (1,88) 1 (2,) 28 (1,1) Connection thread 1-1/2-1 UNF Outlet port see table below ø1, (5,25) Inlet port see table below (1,) 229 (9,) OUT IN 1, (2,2) Mounting holes (x) 5/1-18 UNCx22,2 (,88) for NPT and SAE ports M1x22,2 (,88) for BSP ports 8,1 () 19,5 (,75) 1 ø128 (5,1) Note: Gauge ports (optional) 1/8 NPTF for NPT and SAE inlet and outlet ports 1/8 BSP for BSP inlet and outlet ports Inlet pressure location: 1, (for return line filter) Outlet pressure location:, (for suction filter) Ordering Code Dimensions in mm (inch) SSF 15 25 Filter type SSF Indicator port options Port options Code Connection Style 15 NPT 1 1 /2 NPT 15B BSP G1 1 /2 18 SAE 1 7 /8-12 UN Note: SSF 15, 15B and 18 filters use a wide cut or L shaped element seal. By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 8
Spin-On Filters SSF 2,25 Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections Flow rate By-pass valve Clogging indicators Elements BSP, NPT, or SAE flange 5 l/min (12 US GPM) for return line, 12 l/min (5 US GPM) for suction line applications 12 bar (17 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve - C to +1 C (-22 F to 212 F) Built into the head Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable See page 22 For use with SF7 and SFC57/58 series elements For element types and flow characteristics see pages 15..18 for SF7 see pages 2...21 for SFC57/58 Mineral oils, other fluids on request Dimensions SSF 2 Dimensions SSF 25 ø12 (5,19) Inlet/Outlet ports see table below SFC 57 L=18 (7,9) SFC 58 L= 22 (8,9) 72 (2,8) SFC 57 L=18 (7,9) SFC 58 L= 22 (8,9) G1 1/2 H1 G1 1/2 (1,) (1,) 17 (5,9) dual spigot G1 1/ and 1-1/2-1 UNF 1 (5,51) 8 (,1) (1,2) SFC 57 L= 18 (7,9) SFC 58 L= 22 (8,9) (2,) ø12 (5,19) ø12 (5,19) 2 (1,2) dual spigot G1 1/ and 1-1/2-1 UNF 5 (2,2) 1 (5,28) 5 (2,5) ø12 (5,19) M1 15 (5,91) 28 (11,18) Ordering Code Dimensions in mm (inch) Filter type SSF SSF 2N 25 Port options Code Connection Style 2B BSP G1 1 /2 2N NPT 1 1 /2 NPT 2S SAE 1 7 /8-12 UN 25 NPT&SAE Flange 11 /2 NPT & 2 SAE Code 1 Flange 25B BSP&SAE Flange G1 1 / & 1 1 /2 SAE Code 1 Flange Note: SSF-2 and SSF-25 filters use a wide cut or L shaped element seal. By-pass options No by-pass,2 bar ( PSI) 5, bar (5 PSI) 15 1 bar (15 PSI) 25 1,7 bar (25 PSI) Indicator port options No indicator port 1 Gauge port drilled-return 2 Gauge port drilled-suction All gauge ports drilled 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 9
Tank Top Spin-On Filters SSFT 12 Construction Die cast aluminium head Seals NBR (Buna-N ) Dimensions Port connections Flow rate By-pass valve Clogging indicators Elements BSP and NPT 75 l/min (2 US GPM) 7 bar (1 PSI) working pressure - C to +1 C (-22 F to 212 F) 1 bar (15 PSI) by-pass in filter element Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SFT5/ series elements For element types and flow characteristics see pages 19...21 Mineral oils, other fluids on request ø98 (,8) Connection thread G / 1 5 (,55) (1,97) SFCT 5.. [=15 (5,71)] SFCT.. [=19 (7,8)] 25 (,98) G / or / NPT 1 (,) G / or / NPT 5 (1,8) 7 (2,99) Dimensions in mm (inch) Ordering Code SSFT 12 1 Filter type SSFT Port options Code Connection Style 12B BSP G / 12 NPT / NPT Indicator port options No indicator port 1 Gauge port drilled-return 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 1
Tank Top Spin-On Filters SSFT 2 Construction Die cast aluminium head Seals NBR (Buna-N ) Dimensions Port connections Flow rate By-pass valve Clogging indicators Elements BSP and NPT 2 l/min (5 US GPM) 7 bar (1 PSI) working pressure - C to +1 C (-22 F to 212 F) 1 bar (15 PSI) by-pass in filter element Gauge indicator with colored segments Electrical.5...2.5 bar (5...5 PSI) adjustable see page 22 For use with SFT57/58 series elements For element types and flow characteristics see pages 2...21 Mineral oils, other fluids on request ø12 (5,2) 5 (1,97) 2 7 (1,) (,78) (2,87) SFCT 57.. [=18 (7,1)] SFCT 58.. [=22 (8,9)] Connection thread G 1 1/ and 1 1/2-1 UN dual spigot (2,) 15 (5,2) G 1 1/2 or 1 1/2 NPT Ordering Code Filter type SSFT Port options Code Connection Style 2B BSP G 1 1 /2 2 NPT 1 1 /2 NPT SSFT 2 1 Dimensions in mm (inch) Indicator port options No indicator port 1 Gauge port drilled-return 9 Special Note: Standard gauge port for BSP connection port is G1/8. Standard gauge port for NPT and SAE connection port is 1/8 NPTF 11
Spin-On Elements SF Series Stauff SF series spin-on elements are used with the Stauff SLF spin on filters. Seals NBR (Buna-N ) By-pass valve 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Built into the element Mineral oils, other fluids on request Dimensions and Ordering Code Paper SF 1-18 SF 25-1 Flow Characteristics The following characteristics are valid for mineral oils with a density of,85 kg/dm and the kinematic viscosity of mm 2 /s. The characteristics have been determined in accordance to ISO 98. Average pressure drop through a clean filter assembly. Diameter 1 m 25 m 77,7 77,7 (,5) (,5) Length 88,5 88,5 (,9) (,9) Element Thread /-1 UNF /-1 UNF Beta Ratio ß1 2 ß25 2 Dirt Holding ACFTD (g) Filtration Area 825,2 825,2 cm cm2 2 (127,9 in 2 ) (127,9 in 2 ) By-pass 1,2 bar,7 bar setting (18 PSI) (1 PSI) 25 2 15 1 5 2. 1. 1.2.8. Spin-on Filter Assembly SF.... 1 2 2.5 5 7.5 SF1-18 SF25-1 Q in US GPM Maximum Working Pressure Carton Quantity Carton Weight 1 bar 1 bar (2 PSI) (2 PSI) 12 12, kg, kg (8 lb) (8 lb) 12
Spin-On Elements SF5 Series Stauff SF5 series spin-on elements are used with the Stauff SAF series spin on filters. Seals NBR (Buna-N ) seals 1 bar (2 PSI) working pressure,maximum pressure differential of 5.5 bar (8 PSI) for any application with no bypass valve -2 C to 1 C (-25 F to 212 F) Mineral oils, other fluids on request Dimensions and Ordering Code Paper Microglass Water Absorbing SF 52 SF 521 SF 51 SF 511 SF 59 SF 55 SF 5 SF 52-W 1 m 1 m 25 m 25 m m 1 m 25 m 1 m water absorb Diameter 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 (.7) (.7) (.7) (.7) (.7) (.7) (.7) (.7) Length 1. 2.2 1. 2.2 1. 1. 1. 1 (5.7) (8.) (5.7) (8.) (5.7) (5.7) (5.7) (5.25) Element Thread 1-12 UNF 1-12 UNF 1-12 UNF 1-12 UNF 1-12 UNF 1-12 UNF 1-12 UNF 1-12 UNF Beta Ratio ß1 2 ß1 2 ß25 2 ß25 2 ß 75 ß12 75 ß25 75 ß1 2 Dirt Holding Capacity ACFTD (g) Water holding 1. 22 2. 1.2 19 11 2 capacity 12 ml (5.5 oz) Filtration Area 2 cm2 881 cm 2 2212 cm 2 88 cm 2 2519 cm 2 25 cm 2 25 cm 2 1225 cm 2 (57.5 in 2 ) (1.7 in 2 ) (2.9 in 2 ) (525.1 in 2 ) (9. in 2 ) (72.7 in 2 ) (72.7 in 2 ) (19 in 2 ) Maximum Working Pressure 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar.9 bar (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (1 PSI) Carton Quantity 12 12 12 12 12 12 12 12 Carton Weight. kg 8. kg. kg 8.8 kg 8. kg 8. kg 8. kg 8. kg (1.9 lb) (18.5 lb) (1.2 lb) (19. lb) (19 lb) (19 lb) (19 lb) (19 lb) 1
Spin-On Elements SF5 Series Flow Characteristics The following characteristics are valid for mineral oils with a density of,85 kg/dm and the kinematic viscosity of mm 2 /s. The characteristics have been determined in accordance to ISO 98. 1 8 2,75,,5,,15 Spin-on Filterhead SAF-5/ 1 8 2,5,,,2,1 Spin-on Filterhead SAF-7/11 7,5,5,5,,,2,1 Spin-on Filterhead SAF-1/1, 25 5 75 1, 25 5 75 1, 25 5 75 1 5 1 15 2 25 Q in US GPM 5 1 15 2 25 Q in US GPM 5 1 15 2 25 Q in US GPM 7,5,5 Spin-on Filterelement SF52 7,5,5 Spin-on Filterelement SF521 7,5,5 Spin-on Filterelement SF51,,,,5,,5,,5,,2,2,2,1,1,1, 8 12 1, 8 12 1, 8 12 1 1 2 Q in US GPM 1 2 Q in US GPM 1 2 Q in US GPM 7,5,5,,5,,2 Spin-on Filterelement SF511,5 1, 8,,2 Spin-on Filterelement SF59 7,5,5,,5,,2 Spin-on Filterelement SF5,1 2,1,1, 8 12 1, 8 12 1, 8 12 1 1 2 Q in US GPM 1 2 Q in US GPM 1 2 Q in US GPM 7,5,5 Spin-on Filterelement SF55,5,,,2,1, 8 12 1 1 2 Q in US GPM 1
Spin-On Elements SF7 Series Stauff SF7 series spin-on elements are used with the Stauff SSF 2, 2, 25, 1, 12, 1, 1, 15, and 18, series spin on filters. Seals NBR (Buna-N ) Dimensions and Ordering Code Microglass 1 bar (2 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Mineral oils, other fluids on request SF 72-MG SF 7-MG SF 7-MG SF 7-MG SF 77-MG SF 7-MG SF 71-MG SF 728-MG SF 72-MG 1 m m m m m 12 m 12 m 25 m 25 m Diameter Length 128 128 128 128 128 128 128 128 128 (5,) (5,) (5,) (5,) (5,) (5,) (5,) (5,) (5,) 27 18 27 18 27 18 27 18 27 (1,) (,) (1,) (,) (1,) (,) (1,) (,) (1,) Element Thread 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF Beta Ratio ß1 2 ß 2 ß 2 ß 2 ß 2 ß12 2 ß12 2 ß25 2 ß25 2 Dirt Holding Capacity ACFTD (g) 1 7 5 5 8 59 5 7 Filtration Area 817 cm 2 51 cm 2 817 cm 2 51 cm 2 72 cm 2 51 cm 2 7522 cm 2 51 cm 2 817 cm 2 (12 in 2 ) (28 in 2 ) (12 in 2 ) (28 in 2 ) (111 in 2 ) (28 in 2 ) (11 in 2 ) (28 in 2 ) (12 in 2 ) Maximum Working Pressure 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) Carton Quantity Carton Weight 11,8 kg 8,2 kg 11,8 kg 8,2 kg 11,8 kg 8,2 kg 11,8 kg 8,2 kg 11,8 kg (2,1 lb) (18 lb) (2,1 lb) (18 lb) (2,1 lb) (18 lb) (2,1 lb) (18 lb) (2,1 lb) 15
Spin-On Elements SF7 Series Paper Stainless Wire Mesh Water Absorbing SF 72 SF 721 SF 71 SF 711 SF 79 SF 791 SF 721-W 1 m 1 m 25 m 25 m 125 m 125 m 1 m water absorb Diameter 128 128 128 128 128 128 128 (5,) (5,) (5,) (5,) (5,) (5,) (5,) 18 27 18 27 18 27 27 Length (,) (1,) (,) (1,) (,) (1,) (1,) Element 1 Thread 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF 1 1 /2-1 UNF Beta Ratio ß1 2 ß1 2 ß25 2 ß25 2 n/a n/a ß1 2 Dirt Holding Capacity ACFTD (g) Water holding 2 2 n/a n/a capacity ml (15 oz) Filtration Area 77 cm 2 81 cm 2 77 cm 2 81 cm 2 129 cm 2 22 cm 2 cm 2 (57 in 2 ) (15 in 2 ) (57 in 2 ) (15 in 2 ) (2 in 2 ) (15 in 2 ) (88 in 2 ) Maximum Working Pressure Carton Quantity Carton Weight 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI) (2 PSI), kg 7,9 kg,7 kg 9, kg 8,2 kg 11,8 kg 11,8 kg (1, lb) (17.5 lb) (1.9 lb) (2, lb) (18 lb) (2,1 lb) (2,1 lb) 1
Spin-On Elements SF7 Series Flow Characteristics The following characteristics are valid for mineral oils with a density of,85 kg/dm and the kinematic viscosity of mm 2 /s. The characteristics have been determined in accordance to ISO 98. 15 1. 12.8 Spin-on Filter Head SSF 2/1/12/1/1 15 1. 12.8 Spin-on Filter Head SSF 15/18.75 25. 2 Spin-on Filter Head SSF 2/25 9. 9. 15.5.. 1..2.2 5.15. 1 2 25. 1 2 25. 15 5 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 8 12 Q in US GPM 15 1, 12,8 9,, SF72-MG 15 1, 12,8 9,, SF7-MG,75 1, 8,5, 7-MG,2,2 2,15, 8 12 1, 5 1 15 2 25, 1 2 25 1 2 Q in US GPM 15 5 Q in US GPM 25 5 75 87,5 Q in US GPM 15 1, 12,8 9,, SF7-MG 7,5,5,,5,,2 SF77-MG,75 1, 8,5, 7-MG,2,1 2,15, 1 2 25, 1 2 25, 1 2 25 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 7,5,5 SF71-MG 7,5,5 SF728-MG 7,5,5 SF72-MG,,,,5,,5,,5,,2,2,2,1,1,1, 1 2 25, 1 2 25, 1 2 25 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 17
Spin-On Elements SF7 Series Flow Characteristics The following characteristics are valid for mineral oils with a density of,85 kg/dm and the kinematic viscosity of mm 2 /s. The characteristics have been determined in accordance to ISO 98..75 1. 8.5 SF 72.75 1. 8.5 SF 721 15 1. 12.8 9. SF 71... 2.15 2.15.2. 1 2 25. 1 2 25. 1 2 25 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM.75 1. 8 SF 711 1.5.1 SF 79/91 SF79 SF791.5..75.5 2.15. 1 2 25. 1 2 25 25 5 75 87,5 Q in US GPM 25 5 75 87,5 Q in US GPM 18
Spin-On Elements SFC 5,, SFCT 5, Series Stauff SF5 and SFC series spin-on elements are used with the Stauff SSF12 series spin on filters with G / threaded posts. Stauff SFCT 5 and SFCT series spin-on elements have an internal 1 bar (15 PSI) by-pass and anti-drain back diaphragm for use with Stauff SSFT 12 tank top spin-on filters. Seals NBR (Buna-N ) seals 12 bar (17 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Mineral oils, other fluids on request Dimensions and Ordering Code Paper Microglass Wire Mesh Brass Mesh SFC 51E SFC 1E SFC 525E SFC 25E SFC 51AE SFC 1AE SFC 5E SFC E SFC 5125E SFC 125E SFCT 51E SFCT 1E SFCT 525E SFCT 25E SFCT 51AE SFCT 1AE SFCT 5E SFCT E SFCT 512E SFCT 12E 1 m 1 m 25 m 25 m 1 m 1 m m m 125 m 125 m Diameter 98 98 98 98 98 98 98 98 98 98 (,8) (,8) (,8) (,8) (,8) (,8) (,8) (,8) (,8) (,8) Length Element Thread 15 19 15 19 15 19 15 19 15 19 (5,7) (7,5) (5,7) (7,5) (5,7) (7,5) (5,7) (7,5) (5,7) (7,5) G / G / G / G / G / G / G / G / G / G / Beta Ratio ß1 2 ß1 2 ß25 2 ß25 2 ß1 75 ß1 75 n/a n/a n/a n/a By-pass Setting (SFCT Series only) 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) Maximum Working Pressure Carton Quantity Carton Weight 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) 1 1 1 1 1 1 1 1 1 1,9 kg 1, kg,9 kg 1, kg,9 kg 1, kg,9 kg 1, kg,9 kg 1, kg (2 lb) (2, lb) (2 lb) (2, lb) (2 lb) (2, lb) (2 lb) (2, lb) (2 lb) (2, lb) 19
Spin-On Elements SFC 57, 58, SFCT 57, 58 Series Stauff SFC 57 and SFC 58 series spin-on elements are used with the Stauff SSF2, 2, 25, 1, 12, 1, 1, 15 and 18 series spin on filters with G 1 1/ threaded posts. Stauff SFCT 57 and SFCT 58 series spin-on elements have an internal 1 bar (15 PSI) by-pass and anti-drain back diaphragm for use with Stauff SSFT 2 tank top spin-on filters. Seals NBR (Buna-N ) seals 12 bar (17 PSI) working pressure, maximum pressure differential of 5,5 bar (8 PSI) for any application with no by-pass valve -2 C to +1 C (-25 F to 212 F) Mineral oils, other fluids on request Dimensions and Ordering Code Paper Microglass Wire Mesh Brass Mesh SFC 571E SFC 581E SFC 5725E SFC 5825E SFC 571AE SFC 581AE SFC 57E SFC 58E SFC 57125E SFC 58125E SFCT 571E SFCT 581E SFCT 5725E SFCT 5825E SFCT 571AE SFCT 581AE SFCT 57E SFCT 58E SFCT 57125E SFCT 58125E 1 m 1 m 25 m 25 m 1 m 1 m m m 125 m 125 m Diameter 12 12 12 12 12 12 12 12 12 12 (5,2) (5,2) (5,2) (5,2) (5,2) (5,2) (5,2) (5,2) (5,2) (5,2) Length Element Thread 18 22 18 22 18 22 18 22 18 22 (7,1) (8,9) (7,1) (8,9) (7,1) (8,9) (7,1) (8,9) (7,1) (8,9) G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / G 1 1 / Beta Ratio ß1 2 ß1 2 ß25 2 ß25 2 ß1 75 ß1 75 n/a n/a n/a n/a By-pass Setting (SFCT Series only) 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar 1 bar (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) (15 PSI) Maximum Working Pressure Carton Quantity Carton Weight 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar 12 bar (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) (17 PSI) 1 1 1 1 1 1 1 1 1 1 1, kg 1,85 kg 1, kg 1,85 kg 1, kg 1,85 kg,9 kg 1, kg,9 kg 1, kg ( lb) ( lb) ( lb) ( lb) ( lb) ( lb) (2 lb) (2, lb) (2 lb) (2, lb) 2
Spin-On Elements SFC, SFCT Series Flow Characteristics The following characteristics are valid for mineral oils with a density of,85 kg/dm and the kinematic viscosity of mm 2 /s. The characteristics have been determined in accordance to ISO 98. Spin-on Filter Housing SSF12 Spin-on Filter Housing SSFT12/2 25 2,75, 25 2,75, SSFT 12 15,5 15,5 SSFT 2 1, 1, 5,15 5,15, 5 1 15, 1 2 1 2 Q in US GPM 25 5 75 Q in US GPM 7,5,5,5,,,2 s SFC/SFCT 5.. 1AE 1E 25E/25AE,1 E 125E, 8 12 7,5,5 s SFC/SFCT..,5 1AE 1, 25AE 8,,2 1E,1, 25E E 125E 2 8 12,75,,5, s SFC/SFCT 57.. 1AE 25AE 1E 25E,15, E 125E 1 2 1 2 Q in US GPM 1 2 Q in US GPM 25 5 75 Q in US GPM 1 8 2,75,,5 s SFC/SFCT 58.. 1AE 25AE, 1E,15 25E E, 125E 1 2 25 5 75 Q in US GPM 21
Filter Indicators Visual Indicators Vacuum Gauges, Suction Line Applications GV-5 GV-1 Red Area Red Area Yellow Area Type Thread Type G GV-5B / GV-1B / G-12B / CI-2B G 1 /8 GV-5 / GV-1 / G-12 / CI-2 1 /8 NPTF 7 (1,8),7 (1,21) Pressure Gauges, Return Line Applications CI-12 Yellow Area Green Area For use with PSI filter by-pass valve,2 bar ( PSI) Red Area CI-2 Yellow Area Green Area For use with 5PSI filter by-pass valve,5 bar (5 PSI) Red Area 1 /8 NPT G ø8,1 () Yellow Area Green Area Green Area Electrical Indicator Brass Internals For use with 15PSI filter by-pass valve 1, bar (15 PSI) Type For use with 25PSI filter by-pass valve 1,7 bar (25 PSI) Thread Type EPS-1B / EVS 1B G 1 /8 EPS-1 / EVS 1 1 /8 NPT 1 (1.22) 1 (1.22) 1 (1.22) 7 (1.85) 1 (1.22) 7 (1.85) EPS-1 T EVS-1 G Can Be Field Installed All dimensions in mm (inch) EPS-1 (Pressure) EVS-1 (Vacuum) Electrical 7Amp 125/25 VAC 7Amp 125/25 VAC Protection DIN 5 IP5 DIN 5 PIP5 Temperature Range - C to +8 C (- F to 18 F)Ambient & Medium - C to +8 C (- F to +18 F)Ambient & Medium Diaphragm Material Epichlorohydrin Standard Epichlorohydrin Standard Housing Material Zinc Plated Steel Standard Aluminum AL22 MAXIMUM OVER Pressure 25 Bar (5 PSI) :1 Safety Factor 25 Bar (5 PSI) ADJUSTMENT RANGES.5/2.5 Bar (5/5 PSI) 15/1 mbar (5/ in Hg) Dead Band 2% 25% Maximum Pressure 25 Bar (5 PSI) 25 Bar (5 PSI) Welted Area Material Elastomer & Zinc Plated Steel Brass Elastomer & Anodized Aluminum 1SS Optional Weight Steel Housing.11 Kg (.2 lb).25 Kg (.5 lbs.) Repeatability ±2% at 2 C (7 F) Ambient Temperature ±2% at 2 C (7 F) Ambient Temperature Hirschmann Connector With Strain Relief 22
Spin-On Filters Quick Reference Guide Spin-On Filter Heads Spin-OnFilter Element Type Size Port Post Max. Flow Rate* Catalog Seal SFC 5XX SFC 57XX SFCT 5XX SFCT 57XX SF XX SF 5XX SF 7XX l/min US GPM Page Thin Wide SFC XX SFC 58XX SFCT XX SFCT 58XX SLF 2B G1/ / -1 UNF 19 5 12 SLF 2 1/ NPT / -1 UNF 19 5 12 SLF B G /8 / -1 UNF 19 7 12 SLF /8 NPT / -1 UNF 2 7 12 SLF 9/1-18UNF, # SAE / -1 UNF 2 7 12 SAF 5B G1/2 1-12 UNF 15 SAF 5 1/2 NPT 1-12 UNF 15 1-1 SAF / -1 UN, #8 SAE 1-12 UNF 15 1-1 SAF 7B G / 1-12 UNF 9 25 1-1 SAF 7 / NPT 1-12 UNF 9 25 1-1 SAF 11 1 1/1-12 UN, #12 SAE 1-12 UNF 9 25 1-1 SAF 1B G1 1-12 UNF 128 5 1-1 SAF 1 1 NPT 1-12 UNF 128 5 1-1 SAF 1 1 5/1-12 UN, #1 SAE 1-12 UNF 128 5 1-1 SSF 12 G / G / 9 25 19-21 SSF 12N / NPT G / 9 25 19-21 SSF 1B G1 G 1 1/ + 1 1/2-1 UNF 17 5 7 X 2-21 SSF 1 1 NPT G 1 1/ + 1 1/2-1 UNF 17 5 7 X 15-18 2-21 SSF 2L G 1 1/ G 1 1/ + 1 1/2-1 UNF 225 7 X 15-18 2-21 SSF 12 1 1/ NPT G 1 1/ + 1 1/2-1 UNF 225 7 X 15-18 2-21 SSF 12L 1 1/ NPT G 1 1/ + 1 1/2-1 UNF 225 7 X 15-18 2-21 SSF 1 1 5/1-12 SAE, #1 SAE G 1 1/ + 1 1/2-1 UNF 225 7 X 15-18 2-21 SSF 1 1 5/8-12 SAE, #2 SAE G 1 1/ + 1 1/2-1 UNF 225 7 X 15-18 2-21 SSF 15B G1-1/2 1 1/2-1 UNF 8 8 X 15-18 SSF 15 1 1/2 - NPT 1 1/2-1 UNF 8 8 X 15-18 SSF 18 1 7/8-12 SAE, #2 SAE 1 1/2-1 UNF 8 8 X 15-18 SSF 2B G1-1/2 G 1 1/ + 1 1/2-1 UNF 5 12 9 X 15-18 2-21 SSF 2N 1 1/2 NPT G 1 1/ + 1 1/2-1 UNF 5 12 9 X 15-18 2-21 SSF 2S 1 7/8-12 UN, SAE # 2 G 1 1/ + 1 1/2-1 UNF 5 12 9 X 15-18 2-21 SSF 25B G1-1/ and 1-1/2 SAE Flange G 1 1/ + 1 1/2-1 UNF 5 12 9 X 15-18 2-21 SSF 25 1 1/2 - NPT and 2 SAE Flange G 1 1/ + 1 1/2-1 UNF 5 12 9 X 15-18 2-21 SSFT 12B G/ G/ 75 2 1 19-21 SSFT 12 / NPT G / 75 2 1 19-21 SSFT 2 G 1 1/2 G 1 1/ + 1 1/2-1 UNF 2 5 11 X 2-21 SSFT 2 1 1/2 NPT G 1 1/ + 1 1/2-1 UNF 2 5 11 X 2-21 * Note : Reflects nominal flow rate for return line application. Actual flow rate will depend on element selected. The numbers above reference the page in the catalog 2
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 2-2 Doyle Avenue, Unanderra Wollongong, N.S.W 252 AUSTRALIA Tel: +1 2 2 71 18 77 Fax: +1 2 2 71 8 2 Brazil Stauff Brasil Ltda. Av. Gupê 177 Galpão 2 Bloco A Barueri São Paulo CEP 22-12, BRAZIL Tel: +55 ()11-789-92 Fax: +55 ()11-789-921 2 Canada Stauff Canada Ltd. 8 Milner Avenue Scarborough, Ontário M1B 5N7, CANADA Tel: +1 1 282 8 Fax: +1 1 282 9 China Stauff International Trading (Shangai) Co., Ltd. Shangdian Mansion, Pudong 1, Binzhou Road 212 Shangai, CHINA Tel: +8 21 58 5 5 Fax: +8 21 58 5 8 France Stauff S.A. Z.I. de Vineuil-Blois Sud 2, Avenue du Grain d Or 15 Vineuil-cedex, FRANCE Tel: + 2 5 5 55 5 Fax: + 2 5 2 29 19 Germany Walter Stauffenberg GmbH & Co. KG P.O. Box 175, D-58777 Werdohl, GERMANY Tel: +9 () 2 92/91- Fax: +9 () 2 92 25 5 India Stauff India Pvt. Ltd. Gat. No. 2 Pune-Nagar Road, Wagholi IND-Pune - 1227 Tel: +91 2 75 19 9 Fax: +91 2 75 19 89 Italy Stauff Italia S.R.L. Via Pola 21/2 I-2 Birone di Giussano Tel: +9 2 1 21 1 Fax: +9 2 55 New Zealand Stauff Corporation (NZ) Ltd. Unit J. 15 Harris Road, P.O. Box 58517 Greenmount Auckland-NEW ZEALAND Tel: + 9 271 812 Fax: + 9 271 82 United Kingdom Stauff UK Ltd. 2, Coleford Road Darnall Sheffield, S 9 5 P H, ENGLAND Tel: + 112 518 518 Fax: + 112 518 519 USA Stauff Corporation 7 Wm. Demarest Place Waldwick, NJ 7, USA Tel: +1 21 78 Fax: +1 21 78 52 Globally available through distributors in all industrial countries Stauff 2 KLD&DMP www.stauff.com Ordering Code # : SFT - 2-8A - US