Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST09N ST0N ST0N -9 - - - -1-19 ST044 ST0 ST02 ST09 ST0 ST0-2 -29-1 - - - ST044 S -4-1 www.cpsystem.co.kr
ST - S : nclosed Skid type ST - RS : Roller Skid type ST - RS : nclosed Roller Skid type ST044 S ST02S ST09S ST0S -1 - - - ST044 RS ST02RS ST09RS ST0RS ST0RS - - -9-1 - ST044 RS ST02RS ST09RS ST0RS -81-8 -8-8 P SYSTM O.,LT. -2
Shift hain - Normal type General information Item alculation table Value Item Material PS-mid(P+G), RoHs Speed cceleration ending Radius Temperature -0 ~+0 The biggest able inserted Special production S, UV Multiply 8~ and the biggest cable ertificate, TX(x) The biggest Hydraulic Hose inserted Multiply ~ and the biggest hose imension table Shift hain Pitch N Type Size ending RadIus (R) Weight Speed Temperature kg/m m/s Sectionrame compositype tion ST 044N ST 0N ST 02N ST 09N 44 2 9 ST 0N 0 ST 0N 0, 0, 90, 0, 0,,,, 0, 0.9 0.9 1.00 1.0 1.1 1.0 1.4 1.8 1.94 1. 1. 1. 1.2 1.1 1.41 1.1 1.8 1.92 2,, 0, 1,, 2, 0 2. 2.0 2.4 2.1 2. 2.2 2. 2.9. 1 4.0, 0,, 20, 280, 0..1..49.0.1.9 4.00 4.0 4.1.0 0,, 2,, 0, 0, 0 1 4. 4.1 4. 4.8.1.41.4.80.88.0..0.0 8. 8.0, 0,,, 0.8.9.0.08..0.1.2.8.0.14.1.88 8. 8. 9. 9. www.cpsystem.co.kr Length of able hain L = ½ X LS + LP Ordering ST 044N.. R0 / - 00L : ST -0 ~ +0 1 9 1 14 0 1 19 2-0 ~ +0 1 9 1 14 0 1 19 2-0 ~ +0 2 1 0 2 19 1 1 190 222 22 2 22 2 2 2-0 ~ +0 1 8 1 8 0 2 1 228 190 2 28 2 288 2 8 8 0 4 0-0 ~ +0 142 1 1 0 192 1 2 2 2 292 2 8 290 2 42 0 92 0 442 4 492 0 42 2 00 42-0 ~ +0 1 14 1 0 19 1 2 2 28 29 1 2 0 290 4 0 9 0 44 4 49 0 4 00 4 Q ty(set) Length(mm) racket Type : ree nd racket T : Tie Wrap ST : System Tie Wrap 1, 2 and : ST0N ending radius Inside width Normal type (N) Shift hain racket type - ST044, ST0, ST02, ST09, ST0 ixing nd racket () ST 044N, 0N ST 02N, 09N, 0N - ST0 Steel nd racket (S) ST 0N or ST0N, its end parts of cable chain being fixed are used with steel bracket, and it is possible to be installed 1, 2, types of brackets. 1 (imensions in mm) - Value 2
pplication of Shift hain - Shift hain can be applied to all kinds of machine tools and factory lines. ST 044N pplication: Machine tool Location: Italy Remark: Verious stroke and direction ST 0N pplication: Robot arriage line Location: hina Remark: meters ST 09N pplication: Steel manufacturing line Location: Korea Remark: Verious stroke and direction ST 02N ST 0N pplication: Machine tool Location: Japan Remark: Side mounting pplication: Nylon loth cutting machine Location: Italy Remark: 2. meters ustomized Shift hain Shift hain is designed to be able to move in upper, lower and diagonal directions according to machine's movement. hanging a different ending Radius value at the point that the chain movement turn other sides can create the bending radius or the reverse bending radius for the direction that you need, so the machine can move in zigzag direction. Shift hain can be used for special usage such as a zigzag chain, and has an excellent installation scalability in any hazard environment for cable protection with the general chain. If you need special chain installation, please contact our R& center. P SYSTM O.,LT. -4
Shift hain - Normal type Part of Shift hain Normal type 4 2 8 1 9 ❶ Side and (S) unit that connects each side band and between them R is inserted to strengthen clamping force. ❷ ending Radius Unit (R) unit that inserted between each side band. There are supporting points to create durability. ❻ rame Pin (P) The connecting pin for preventing the breakaway of rame connected at Side and, combining and fixing the rame and Side and. or Shift chain(st)02n, 092N, 0N, 0N type, one side of the frame is fixed by inserting a fixing pin to prevent frame open, which caused by any external impact. lso, in case of ST044N, ST0N type, an open side of the frame is fixed by Hook-type frame. ❼ ree nd racket () ❸ ivider (V-S, M, R, T) unit that divides inserted cables horizontally. ❹ Separator (SP) unit that divides inserted cables vertically to prevent twisting and breaking problem. ❺ rame (Hinged Type) (R) Hinged-type frame, open one side, supports connection of both side of side band and have tongue and groove system plate to secure the position of the divider on the frame. - www.cpsystem.co.kr unit that connects at last side band (left&right). It can be fixed stronger using steel washers. ❽ Tie Wrap (TW) unit that ties cables to maintain straightness of them. It can be assembled to bracket directly or installed separately from bracket. ❾ System Tie Wrap (STW) System-Tie Wrap has to be assembled on fixing and moving point of bracket and can be assembled wthout any tie wrap plate. This tie wrap is used to stay the cables on several floors prevent the cables from being twisted and it can also be assemble without any tools or bolt. This tie wrap has two types, one is to assemble inside bracket the other one is outside.
ssembly procedure of Shift hain Normal type The assembling process of Shift hain N-Type is like below and users must use rubber hammer with careful combination of ivider and Separator. e careful of different assembling process depending on product specification such as ST044N, 0N Type, ST02N, 09N, 0N Type, ST0N Type etc. 1 Insert R unit to each side band, connect the side bands as many as you need, then do the same process to the other side of side band. ix the separator and divider patterns to the bottom-side frames as needed. 2 ssemble the end brackets on both ends using the same method. or ST0N, assemble steel brackets on both ends. ttach frames to one side groove on the side band, and then the other side. ttach frames to one side groove on the side band, and then the other side. ST 044N, 0N are Hinge Type or Hook Type without frame pin. Insert frame pins to secure the frames and complete carrier. (ST02N, 09N, 0N, 0N are applied with frame pin, and ST044N, 0N are Hinge Type or Hook Type without frame pin.) 4 or ST02N, 09N,0N, and 0N, connect the pin of separator in hole of divider after inserting separator in hole of divider. or ST044N and ST0N, separator fixing pins are not used. 8 ssembled Shift hain N-Type is assembled. ST044N, 0N frame type. P SYSTM O.,LT. -
Shift hain - Normal type Part list of Shift hain Normal type omposition of able chain(standard) = Side band(rh) + rame + Side band(lh) + ending radius Unit + ree end bracket M divider(normal divider) should be applied every second frames to make a section composition. Please refer to below part list and description to understand composition of cable chain. Model ST044N lassification Part number escription SI N ST S044N/(LH) Left side band of ST044N ST- S044N/(RH) Right side band of ST044N NING RIUS ST- R044.R,0,90,0,0 ending radius unit for side band sb-r/m. rame, mm sb-r/m. rame, mm sb-r/m. rame, m sb-r/m. rame, m RM sb-r/m. rame, mm sb-r/m. rame, m sb-r/m.0 rame, 0mm sb-r/m.1 rame, sb-r/m. rame, mm R N RKT ST-044N/S nd bracket of ST044N IVIR sb- V028/M Normal divider sb- V028/S To fix separstors at the both side section S- SP/M. Separator, mm S- SP/M. Separator, mm S- SP/M. Separator, m S- SP/M. Separator, mm SPRTOR S- SP/M. Separator, m S- SP/M.0 Separator, 0mm S- SP/M.1 Separator, S- SP/M. Separator, mm S TW0/0R. Tie wrap for end bracket to fix cables, mm S-TW0/0R. Tie wrap for end bracket to fix cables, m TI WRP S- TW0/0R. Tie wrap for end bracket to fix cables, m S-TW0/0R. Tie wrap for end bracket to fix cables, mm S- TW0/0R. Tie wrap for end bracket to fix cables, m ivider for fixing cables at end bracket SYSTM TI WRP sb V028/W S TW.028 System tie wrap to arrange for cables right after moving bracket or fixing bracket Model ST0N Model ST02N lassification Part number escription SI N NING RIUS ST S0N/(LH) ST- S0N/(RH) ST R0.R,,,,0, Left side band of ST0N Right side band of ST0N ending radius unit for side band RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP SYSTM TI WRP sb-r/m. sb-r/m. sb-r/m. sb-r/m. sb-r/m. sb-r/m. sb-r/m.0 sb-r/m.1 sb-r/m. ST-0N/S sb- V0/M sb- V0/S S- SP/M. S- SP/M. S- SP/M. S- SP/M. S- SP/M. S- SP/M. S- SP/M.0 S- SP/M.1 S- SP/M. S-TW0/0N. S-TW0/0N. S-TW0/0N. S-TW0/0N. S-TW0/0N.0 S-TW0/0N.1 S-TW0/0N. sb V0/W S TW.0 rame, mm rame, mm rame, m rame, m rame, mm rame, m rame, 0mm rame, rame, mm nd bracket of ST0N Normal divider To fix separstors at the both side section Separator, mm Separator, mm Separator, m Separator, m Separator, mm Separator, m Separator, 0mm Separator, Separator, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, 0mm Tie wrap for end bracket to fix cables, Tie wrap for end bracket to fix cables, mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket lassification Part number escription SI N NING RIUS RM PIN ST- S02N/(LH) ST-S02N/(RH) ST R0.R,,,,0, S- P/S1 Left side band of ST02N Right side band of ST02N ending radius unit for side band rame pin sb-r0. rame, mm sb-r0. rame, m sb-r0. rame, mm sb-r0. rame, m sb-r0.1 rame, m sb-r0.0 rame, 0mm RM sb-r0.1 sb-r0.1 rame, rame, sb-r0.190 rame, 190mm sb-r0. rame, mm sb-r0.2 rame, 2mm sb-r0.2 rame, 2mm sb-r0. rame, mm R N RKT ST- 02N/S sb- /WH0 sb- V0/M nd bracket of ST02N Steel washer for end bracket Normal divider IVIR sb- V0/S sb- V0/T sb- V0/TP To fix separstors at the both side section T divider T divider pin SPRTOR sb- SP/0.0 SP PIN0 S-TW Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm S-TW Tie wrap for end bracket to fix cables, m TI WRP S-TW Tie wrap for end bracket to fix cables, mm S-TW Tie wrap for end bracket to fix cables, m S-TW0 Tie wrap for end bracket to fix cables, 0mm sb V0/W S TW.0 ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket - www.cpsystem.co.kr
P SYSTM O.,LT. -8 ST09N SI N NING RIUS RM PIN RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP ST- S09N/(LH) ST-S09N/(RH) ST R0.R,,,,0, S-P/S1 sb-r00. sb-r00. sb-r00. sb-r00.0 sb-r00.1 sb-r00.190 sb-r00. sb-r00.20 sb-r00.2 sb-r00. sb-r00.0 sb-r00.0 ST-09N/S sb-/wh00 sb-v00/m sb-v00/s sb-v00/t sb-v00/tp sb-sp/0.0 SP-PIN00 S-TW S-TW S-TW S-TW S-TW0 sb V00/W S TW.00 Left side band of ST09N Right side band of ST09N ending radius unit for side band rame Pin rame, m rame, mm rame, m rame, 0mm rame, rame, 190mm rame, mm rame, 20mm rame, 2mm rame, mm rame, 0mm rame, 0mm nd bracket of ST09N Steel washer for end bracket Normal divider To fix separstors at the both side section T divider T divider pin Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, 0mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket Model lassification Part number escription ST0N SI N NING RIUS RM PIN RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP ST- S0N/(LH) ST-S0N/(RH) ST-R0.R0,, 2,, 0, 0, 0 S-P/S2 ST-0N/S sb-/wh0 sb-v0/m sb-v0/s sb-v0/t sb-v0/tp sb-sp/0.0 SP-PIN0 S-TW S-TW S-TW S-TW S-TW0 sb V0/W S TW.0 Left side band of ST0N Right side band of ST0N ending radius unit for side band rame Pin rame, m rame, mm rame, m rame, m rame, 0mm rame, rame, mm rame, 2mm rame, 2mm rame, 290mm rame, mm rame, 0mm rame, 0mm rame, 4mm rame, 0mm rame, mm rame, 00mm nd bracket of ST0N Steel washer for end bracket Normal divider To fix separstors at the both side section T divider T divider pin Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, 0mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket Model lassification Part number escription sb-r0/. sb-r0/. sb-r0/.1 sb-r0/. sb-r0/.0 sb-r0/.1 sb-r0/. sb-r0/.2 sb-r0/.2 sb-r0/.290 sb-r0/. sb-r0/.0 sb-r0/.0 sb-r0/.4 sb-r0/.0 sb-r0/. sb-r0/.00 ST0N SI N NING RIUS RM PIN RM STL N RKT IVIR SPRTOR TI WRP ST- S0N/(LH) ST-S0N/(RH) ST-R0.R,0,,,0 S-P/S2 ST-S0N/1~2~ sb-v0/m sb-v0/s sb-v0/t sb-v0/tp sb-sp/00.00 SP-PIN S-TW S-TW S-TW S-TW S-TW0 Left side band of ST0N Right side band of ST0N ending radius unit for side band rame Pin rame, m rame, mm rame, m rame, m rame, 0mm rame, rame, mm rame, 2mm rame, 2mm rame, 290mm rame, mm rame, 0mm rame, 0mm rame, 4mm rame, 0mm rame, mm rame, 00mm Steel end bracket of ST0N Normal divider To fix separstors at the both side section T divider T divider pin Separator, 00mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, m Tie wrap for end bracket to fix cables, 0mm Model lassification Part number escription sb-r0/. sb-r0/. sb-r0/.1 sb-r0/. sb-r0/.0 sb-r0/.1 sb-r0/. sb-r0/.2 sb-r0/.2 sb-r0/.290 sb-r0/. sb-r0/.0 sb-r0/.0 sb-r0/.4 sb-r0/.0 sb-r0/. sb-r0/.00
ST 044N Hinge hook type Shift hain alculation of the chain length [ + Lp 2 L= Load diagrams selfsupporting length ] 2. 1 Other installation length Vertical with curve above Vertical curve above = max 2.0m Vertical curve below = max m Side Mounted, Unsupported = max 1.0m ST044N-R : Hs: Safe Space 44 Vertical with curve below Hs: Hs H+0 /2 H: 2R+ /2 ending Radius (R) Horizontal application mounted on its side 0 90 0 0 Lp H Loop Length Loof Projection Moving Height 9 9 48 1 19 22 8 2 28 8 (imensions in mm) -9 www.cpsystem.co.kr ST0N-R Layout of the chain
S-TW.00.() S-TW.0 hain cross section ividers(v) ➌ ➊ ➋ ➍ S-TW.00 ➎ ST 044N 0.4.4 80.4.4.4 0.4 1.4.4 2 1. 9. 0 1 4-Ø.(M OLT Holes) 4 oles) 9. 9. 1.. 9. (imensions in mm) ST044 V-W ~mm Separators(SP) 9. ST044 V-T 9. M olt Holes 2-Ø.(M olt Holes) mm 9. hain Type Ordering NO. rame ST 044N S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M.0 S-SP/M.1 S-SP/M. 0 sb-v0/w 1 S-TW.0 It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. + 9. 1. S-TW.0.() + 4 9..8 1. ❺ sb-v028/w 4 9. 9 System tie wrap (STW) 9..2 9. (imensions in mm) S-TW.0.() - +14 + - +14 + 1. 1. ST044 V-S Hole2-Ø.(M Type olt Holes) 0.4.4.4.4.4 90.4 1.4 1.4 1.4 4 9.9. ST044 V-M.8 4.2 Height(Inner) M. olt hole width ST044ST044 V-M V-T 8 4-Ø.(M OLT Holes).8 4.2 9. 29.8 4.2 rame 1. 9.9. ❹ sb-v028/t 4 9..2 ST044 V-S 4 Width(Outer) Height(Outer) 9..8 4.2 hain Type.2.2 9. 29 4.8 4.2 29 4.2.8 29 ST044 V-M 4 29 4.2.8 4.8 9. +14 +14 1. 4 9. 1. +14 +14 ST044 V-S ST044 V-T 4.8 2-Ø.(M 4.2 olt Holes) 2-Ø.(M olt Holes) 2-Ø.(M olt Holes) 4 29 29 4 29 4.2.8 +14 1. 1. ST044 V-S 1. ront point 1. S-TW.0.() 4.2.8 9. 9. 4 4 29 29 4 - +14 + 1. 4 9. 4-Ø.(M OLT Holes) - +14 + - +14 + + +14 -.98 9. 9. 9. 9. 1. S-TW.0.8 1. ❸ sb-v028/m2 9. -Ø.(M olt Holes) -Ø.(M olt Holes) + +14 - + +14 - + +14 - S-TW.0 1.2 2 Tie wrap (TW) S-TW.0 S-TW.0.() Upper side point ttached to racket 4 4 9. 9. 4.9 1. hain Type S-TW.028.() ST 044N Ordering No. S-TW.028. S-TW.028.() S-TW.028. S-TW.028. S-TW.028. S-TW.028. S-TW.028. S-TW.028.0 S-TW.028.1 S-TW.028. S-TW.028.() rame 0 1 Hole Type M olt Holes (imensions in mm) hain Type Ordering No. ST 044N S-TW0/0R. S-TW0/0R. S-TW0/0R. S-TW0/0R. S-TW0/0R. S-TW0/0R. 4 9 0 94 1 142.4 48.9 48.9 48.9 48.9 48.9 90 (imensions in mm) P SYSTM O.,LT. - S-TW.028 9. 8 4-Ø.(M olt Holes) 4-Ø.(M OLT Holes) + Side point + + + ront point 9. - 9. ST044 V-M.(M olt Holes) -Ø.(M olt Holes) -Ø.(M olt Holes) -Ø.(M olt Holes) S-TW.0.() -Ø.(M olt ixing Holes) -Ø.(M Moving point point olt Holes) S-TW.0.() 1. ST044 V-M (imensions in mm) ree end bracket -Ø.(M olt Holes) -Ø.(M olt Holes) 9. 1. 8 9. 9. 0.9 0.9 1.00 1.0 1.1 1.0 1.4 1.8 1.94 0 1 Weight kg/m 8.98 Height (Inner) 1 9 1 14 19 2 ST 044N rame Width (Outer) Height (Outer) S-TW.00.() hain Type ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. System Tie wrap V.W : Tie wrap divider for free end bracket(). ❶ sb-v028/s ❷ sb-v028/m1 S-TW.00.() sb-v028/w.
ST 0N Hinge hook type Shift hain alculation of the chain length [ L= + Lp 2 2. ] Load diagrams selfsupporting length 2. 1 Other installation length Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max 1.0m 1 ST044N-R ST0N-R Layout of the chain : Hs: Safe Space /2 /2 Vertical with curve below ending Radius (R) Horizontal application mounted on its side - www.cpsystem.co.kr 0 ST02N-R Hs: Hs H+ H: 2R+ Vertical with curve above Lp H Loop Length Loof Projection Moving Height 4 92 849 1 2 2 1 28 2 2 2 02 2 4 (imensions in mm)
S-TW.0.() hain cross section ividers(v) ➌ S-TW.0.() ➊ ➍ ➎ rame 4 9 84 1.2 4 9 4 19 4 229 0 1 9. 9. S-TW.0.() Height(Inner) M. olt hole width 2 4 8 9 1 14 18 Side point.9 4.9.9 4 4.8 8.9.9.8 mm sb-v0/w hain Type Ordering NO. ST 0N S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M. S-SP/M.0 S-SP/M.1 S-SP/M. rame S-TW.0 0 1 Tie wrap (TW) ttached to racket 9. 9 4. 9. 4 9. 9..9 1.2 1 2 9. 4 S-TW.00 4 4 8 M olt Holes + + 4-Ø.(M olt Holes) 4-Ø.(M OLT Holes) ~mm S-TW.0 + + Hole Type It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. Upper side point sb-v00/w (imensions in mm) 4-Ø.(M olt Holes) 4-Ø.(M olt Holes).42 ront point 9. ST0 V-W 4 S-TW.0.() 2.2 4-Ø.(M olt Holes) 4-Ø.(M olt Holes) 4-Ø.(M olt Holes).2 Separators(SP) System tie wrap (STW) es) 1.2 S-TW.00 ST0 V-T +1 +1 S-TW.0.() 4-Ø.(M OLT Holes) 4.9.9 4 4.9 9. 4.8 4.2 1.2 +1 +1 9. (imensions in mm) 8.98.9 4 4.9.9 4 1.2 9. 0.8.8 Width(Outer) Height(Outer) 4.9.8.2 9. ST0 V-T 9. sb-v0/w 9. S-TW.0 9. 8.2 4.2-14-14 +1 +1 + + -14-14 +1 +1 + +.8.9 4.8 +1.2.8 9. 1.2 1.2 9 ST0 V-S 4.2.9 ST 0N.2 ST0 V-M + Ø.(M OLT Holes) ST 0N + + 4-Ø.(M OLT Holes) 0 1 Hole Type M olt Holes (imensions in mm) 4 9. (imensions in mm) S-TW.0 hain Type ST 0N sb-v0/w Ordering No.S-TW.0 S-TW0/0N. S-TW0/0N. S-TW0/0N. S-TW0/0N. S-TW0/0N. S-TW0/0N.0 S-TW0/0N.1 S-TW.0 S-TW0/0N. 2 2 22 1.2.00.00. 0 4.. 14.0 80 14. 0.1sb-V0/W P SYSTM O.,LT. - + + 9 8 rame 4 S-TW.0. S-TW.0. S-TW.0.() S-TW.0. S-TW.0. S-TW.0. S-TW.0. S-TW.0.0 S-TW.0.1 S-TW.0.() S-TW.0. S-TW.0.() + Ordering No. hain Type 14 9. hain Type.8 9..2 S-TW.0 ❺ sb-v0/w 9..8 1.2 8.8.2 1.2 9. 9. 9. 8.98 +2 +1.2 S-TW.00.() ST0 V-S 1.2 ront point 8 8 4.2 9..8 8 9..2 ST0 V-M ST0 V-T.8.2 8 ST0 V-M.9.2 1.2 9. 8 4.8 4.2 1.2 9. 9. 8.2 ❹ sb-v0/t ST0 V-S 9. 8 8. 1.2 8... 9.. 4..9.. S-TW.00.() + + +1 +1-14-14. 4 1.8-14 +1 + 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) + + +1 +1-14-14 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) -14 8-Ø.(M olt Holes) 8-Ø.(M olt Holes) 8-Ø.(M olt Holes). ❸ sb-v0/m2 ixing point 9. 1.2 9..8 1.2 1.2 ST0 V-S.2 Moving point 9. 1.2 ST0 V-M 9. ST0 V-M (imensions in mm) ree end bracket 9. S-TW.00.() 1.29..9 9. 94.8 ST 0N 1. 1. 1. 1.2 9. 1.1 1.41 1.2 1.1 1.8 1.92.9 4-Ø(M OLT Holes) 0 1 ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). System Tiewrap ❶ sb-v0/s ❷ sb-v0/m1 Weight kg/m 1 9 1 14 19 2 Height (Inner) 4 +42 + rame Width (Outer) Height (Outer) hain Type ➋ 9. 9. 2
ST 02N Hinge frame-pin lock type Shift hain alculation of the chain length 2. [ L= + Lp 2 2. ] Load diagrams selfsupporting length 2. 1 Other installation length Vertical with curve above Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max 2. ST044N-R 1 1 ST0N-R ST02N-R Layout of the chain : Hs: Safe Space /2 /2 2 Vertical with curve below ending Radius (R) Horizontal application mounted on its side - www.cpsystem.co.kr 2 0 1 2 ST09N-R Hs: Hs H+ H: 2R+ Lp H Loop Length Loof Projection Moving Height 14 0 4 91 1,04 1,20 9 2 29 22 42 4 2 0 4 (imensions in mm)
hain cross section ividers(v) + 1.8 ST 02N S-TW.00.() 0.8 0.8 0 8 0 0 2 0 0.8 Hole Type. 2 41 19. 4-Ø.2(M olt Holes) 4-Ø.2(M olt Holes) 4-Ø.2(M olt Holes) V-S Height(Inner)ST 02 M. olt hole width 1 0 1 1 190 2 2 ST 02 V 1 19. (imensions in mm) ST 02 V-T 4-Ø.2(M olt Holes) 4-Ø.2(M olt Holes) Separators(SP) ST 02 V-W ~mm M olt Holes 14 mm 42 sb-v0/w S-TW.0 hain Type ST 02N (imensions in mm) Ordering NO. 1 sb-sp/0.0.8 S-TW.0 System tie wrap (STW) 28 rame ST 02 V-T 14 94.8 2 2 19 222 22 22 2 2 2 41. ❹ sb-v0/w. ST 02 V-S - -.8 8 02 V-M Width(Outer)ST Height(Outer) 4-Ø(M OLT Holes) 41 2 19. +42 + 41 2. 41 2 Type hain.8 8 2 41 2 41 14. - - - 41 2 19 41 2 41 2 ront point 0.8 0.8 42 19 94.8 S-TW.0.() 19 419 ST 02 V-M - + 4 14. 419 19. 14. 14. ST 02 V-T V-M STST 02 V-M 19 4 19. ST 02 V-S 19 4 0.8 4 ❸ sb-v0/t - + + - + - 4 - + 4 - + - + + - + 4 19 19 4 0.8 + - + -. 0.8 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) 8-Ø.2(M +42 olt Holes) 8-Ø.2(M olt Holes) ixing point 14. 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) ❷ sb-v0/m. ST 02 V-M 8-Ø.2(M olt Holes) 2 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) 4-Ø(M OLT Holes) (imensions in mm) ree end bracket Moving point S-TW.0.() ❶ sb-v0/s System Tiewrap 0 2. 2.0 2.4 2.1 2. 2.2 2. 2.9. 1 4.0 0.8 1 0 S-TW.0.() 1 1 190 2 2 Weight kg/m Height (Inner) 2 2 19 222 22 22 2 2 ST 02N rame Width (Outer) Height (Outer) 0.8 hain Type 4- Ø(M OLT Holes) ➍ ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). + ➋ ➌ ➊ 2 0.8 0.8 0.8 S-TW.00.() Tie wrap (TW) sb-v0/w S-TW.0 S-TW.00 sb-v00/w S-TW.00.(). 0.8 ront point 0.8 8.98 4-Ø.(M OLT Holes) Ordering No. ST 02N S- TW S-TW S-TW S-TW S-TW0 8 98 2 141 9 148 4 (imensions in mm).9 9 2 9. 1.2 sb-v0/w. hain Type M olt Holes (imensions in mm). 2 9. + + 4. S-TW.0 Hole Type 8 S-TW.0.() 4-Ø.(M OLT Holes) 1 0 1 1 190 2 2 4. S-TW.0. S-TW.0.() S-TW.0. S-TW.0. S-TW.0. S-TW.0.1 S-TW.0.0 S-TW.0.1 S-TW.0.1 S-TW.0.190 S-TW.0. S-TW.0.2 S-TW.0.2 S-TW.0. rame 8.98 4 Ordering No. hain Type S-TW.0.() ST 02N 1 + + sb-v00/w sb-v0/w S-TW.0 8.98 4-Ø.(M OLT Holes) 1 S-TW.0 4 4 8.98 S-TW.00 +2 +1 4-Ø.2(M olt Holes) +2 +1 Side point 8-Ø.2(M OLT Holes) Upper side point S-TW.00.8 oles) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. 1.8 +2 +1 P SYSTM O.,LT. -14 9. 9. 9
Hinge frame-pin lock type Shift hain alculation of the chain length 2. [ L= + Lp 2 2. ] Load diagrams selfsupporting length 2. 1 Other installation length Vertical with curve above Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max.0m 1 ST0N-R 1 1 ST02N-R ST09N-R Layout of the chain : Hs: Safe Space /2 /2 9 Vertical with curve below ending Radius (R) Horizontal application mounted on its side - www.cpsystem.co.kr 0 20 280 0 ST0N-R0 Hs: Hs H+ H: 2R+ m ST 09N Lp H Loop Length Loof Projection Moving Height 80 8 1,0 1,0 1,0 1, 4 4 428 9 29 2 4 42 42 8 (imensions in mm)
hain cross section ividers(v) 2 44 2 44 2 44 14.. 14. 8.2. 14..... Width(Outer) Height(Outer) 1 8 1 8 2 228 ST 09N 2 8 28 S-TW.0.() 288 8 8 4 ST 09 V-S 2 rame Height(Inner) M. olt hole width ST 9 V-R S-TW.0.() 0 1 190 20 2 2 0 0 49 4 99 4 9 149 19 9 199 9 299 49 19..8 ST 09ST V-T 09 V-T 4-Ø(M olt Holes)4-Ø(M olt Holes) 19. -2-2 Hole Type ST 09 V-T -2-2 ST 09 ST 09V-R V-R 4-Ø(M olt Holes)4-Ø(M olt Holes) -2. hain Type ST 09 V-M +.. 4- Ø(M OLT Holes) 19. 4-Ø(M ST olt Holes) ST 09 V-S 09 V-S 2 8.2 44 2 2. 2 2 ❹ sb-v00/w + 14. 14. 14. 14..9.8. 2.8 2.8.8 ST ST 099 V-R V-M 8.2 8.2.8.8 ST 09 V-S 2 2.9.9. 14.. ront point 44 2 ST 09 V-M ST 09 V-M.8. ❹ sb-v00/t 44 2 2 8.2 14. 14. 14. 14.. 44 2 2 2.8.8.8.8.8.8.8.8.8.8 -.8 + 44 2 2 44.. - - + + + - - + + 2 44 8-Ø(M olt Holes)8-Ø(M olt Holes) + + - - + + - - 8-Ø(M olt Holes)8-Ø(M olt Holes) 14. ST 09 V-M ixing point 8-Ø(M olt Holes) 8-Ø(M olt Holes) 8-Ø(M olt Holes)8-Ø(M olt Holes) ❷ sb-v00/m ❸ sb-v00/r 8-Ø(M olt Holes) Moving point + System Tiewrap (imensions in mm) ree end bracket 8-Ø(M olt Holes) ➎ 4- Ø(M OLT Holes).8.8 ❶ sb-v00/s..1..49.0.1.9.9 4.00 4.0 4.1.0.8.8 + 0 1 190 20 2 2 0 0 Weight kg/m + Height (Inner) ➋ ➍ ssemble divider every second frame. V.T : pplied to rame 2~0. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). 1 8 1 8 2 228 2 8 28 288 8 8 4 ST 09N rame Width (Outer) Height (Outer).8 hain Type ➌ ➊ 19. (imensions in mm) Separators(SP) ST 09 V-W ~0mm M olt Holes mm (imensions in mm) +42 + System tie wrap (STW) hain Type Ordering NO. ST 09N sb-sp/0.0 4-Ø(M OLT Holes) It is a unit to classify each cable for +42 + 94.8 Upper side point 1.8.4 14.8 8 42 S-TW.0 1.8 2 4. sb-v0/w 4. sb-v0/w S-TW.0 +2 +1 14 ST 09N 1 sb-v0/w 9 148 sb-v00/w 8 98 2 141 42 S-TW.00. S- TW S-TW S-TW S-TW S-TW0 S-TW.0 M olt Holes S-TW.0 Ordering No. sb-v00/w.8 8 hain Type 1.8 28 S-TW.00.8 8.98 1 (imensions in mm) sb-v0/w (imensions in mm) 8.98. 2 0.8 S-TW.00.(). 8-Ø.2(M OLT Holes) 0 1 190 20 2 2 0 0 Hole Type.8 ST 09N +2 +1 S-TW.00.() rame 1.8 S-TW.00. S-TW.00. S-TW.00. S-TW.00.0 S-TW.00.1 S-TW.00.190 S-TW.00. S-TW.00.20 S-TW.00.2 S-TW.00.2 S-TW.00. S-TW.00.0 S-TW.00.0 0.8 S-TW.00.() Ordering No..8 hain Type 1 28 94.8 94.8 14 4-Ø(M OLT Holes).8 Side point +42 + 4-Ø(M olt Holes) +42 + ront point.8 8 94.8 It can either be installed to free end bracket or installed separately according its application environment. OLT Holes) Tie wrap (TW) preventing entanglement of cables. S-TW.0.() P SYSTM O.,LT. -1 S-TW.00 sb-v00/w S-TW.0 sb-v0/w
ST 0N Hinge frame-pin lock type Shift hain alculation of the chain length 2. [ L= + Lp 2 2. ] Load diagrams selfsupporting length 2. 1 Other installation length Vertical with curve above Vertical curve above = max.0m Vertical curve below = max 0m Side Mounted, Unsupported = max.0m ST02N-R 1 1 ST09N-R ST0N-R0 Layout of the chain : Hs: Safe Space /2 /2 0 Vertical with curve below ending Radius (R) Horizontal application mounted on its side -1 www.cpsystem.co.kr 0 2 0 0 0 ST0N-R2 Hs: Hs H+0 1 H: 2R+ Lp H Loop Length Loof Projection Moving Height 1,04 1,9 1, 1,42 1,80 1, 2,01 44 494 44 4 44 94 94 48 8 08 08 808 908 1, (imensions in mm)
ividers(v) hain cross section.4.8. 8.2 14. 14. 14. 14.. ST0V-R V-M ST0.8.8 88.4.4 8.2 8.2.4 8.8.8 ❹ sb-v0/t. ST0 V-S ❸ sb-v0/r.. 8.8 8.4.4.8 8.8 8 8.4.4.4.8.4 System Tiewrap ❷ sb-v0/m 8.8 8.4.4.4 8.8 8.8 ❶ sb-v0/s 1 4. 4.1 4. 4.8.1.41 14..4.80.88.0 ST0 V-M..0.0 8. 8.0 8.4.4.8 8.8 8.8 8 1 0 1 2 2 290 0 0 4 0 00 Weight kg/m.8 8 Height (Inner).8 8 142 1 192 2 2 292 2 42 92 442 492 42 2 42 ST 0N rame.4 Width (Outer) Height (Outer) ➎ ➋ ➍ ssemble divider every second frame. V.T : pplied to rame ~00. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). hain Type ➌ ➊ 8.2.4.4 (imensions in mm) 0 1 1 2 2 290 0 0 4 0 00 ST 0N 9 8 Height(Outer) rame 1 0 1 2 2 290 0 0 4 0 00 9 Height(Inner) M. olt hole9width -28 +29 Hole Type 90 1 1 0 190 20 2 290 90 4 490 8.4.8 8.8 8-28 +29 - - 4-Ø(M olt Holes) 42 Separators(SP) 9 8 4-Ø(M olt Holes) 28 19. - ST0 V-T 19. (imensions in mm) ST0 V-W ~00mm - 4-Ø(M olt Holes) 4 84 ST0 V-T ST0 V-T mm 4 84 hain Type 9 Width(Outer) 14. ront point 14 4-Ø(M olt Holes) 4-Ø(M olt Holes) hain Type Ordering NO. ST 0N sb-sp/00.00 Tie wrap (TW) M olt Holes 9 8 9 - ST0 V-R 8 8 84 84 84 84 ST0 V-S 8 8 8 9 9 8.2. ST0 V-M 4 14. 8 19. 19. ❹ sb-v0/w 4 14. ST0 V-R ST0 V-R 8-Ø(M olt Holes) 14. 14.. ST0ST0 V-S V-S 84 4.8 8.8 8 +29-28 +29-28 8-Ø(M olt Holes) 8-Ø(M olt Holes) -28.4 +29 +29.4-28 +29-28 8-Ø(M olt Holes) ixing point ST0 V-M ST0 V-M 84 Moving point.. 14. 8-Ø(M olt Holes) 8-Ø(M olt Holes) 8-Ø(M olt Holes) -28-28 +29.8 +29 8 olt Holes) 8-Ø(M olt8-ø(m Holes) 14. 84 Holes) 14...4 ree end bracket 4. 4... 2 (imensions in mm) hain Type System tie wrap (STW) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. + + 4- Ø(M OLT Holes) + + ST 0N Upper side point Ordering No. ST 0N S-TW.0. S-TW.0. S-TW.0.1 S-TW.0. S-TW.0.0 S-TW.0.1 S-TW.0. S-TW.0.2 S-TW.0.2 S-TW.0.290 S-TW.0. S-TW.0.0 S-TW.0.0 S-TW.0.4 S-TW.0.0 S-TW.0. S-TW.0.00 14 2 4- Ø(M OLT Holes).4 2 Side point + + 4-Ø(M olt Holes) + + 2 S- TW S-TW S-TW S-TW S-TW0 hain Type 0(M OLT Holes) ront point Ordering No. rame 1 0 1 2 2 290 0 0 4 0 00 8 98 2 141 9 148 Hole Type M olt Holes P SYSTM O.,LT. - S-TW.0.()
ST 0N Hinge frame-pin lock type Shift hain alculation of the chain length 2. [ L= + Lp 2 2. ] Load diagrams selfsupporting length 2. 1 Other installation length Vertical with curve above Vertical curve above = max.0m Vertical curve below = max 0m Side Mounted, Unsupported = max 4.0m ST09N-R 1 ST0N-R0 1 ST0N-R2 Layout of the chain : Hs: Safe Space 0 Vertical with curve below Hs: Hs H+80 1 H: 2R+1 1 ending Radius (R) Horizontal application mounted on its side -19 www.cpsystem.co.kr 0 0 Lp H Loop Length Loof Projection Moving Height 1,2 1, 1,80 2, 2, 1 1 4 8 928 9 1,0 1,0 (imensions in mm)
hain cross section ividers(v) ➋ ➊ 1 1 2 1 1 hain Type ST 0N 2 2 2 2 Height(Outer) 1 rame 1 0 1 2 2 290 0 0 4 0 00 0 8. 8. 0 ST 0 V-S 0 1.2 (imensions in mm) ST 0 V-T Separators(SP) 2 Height(Inner) 2. 2. 0 0 2. 2. 0 0 2. 2. 0 0 0 0 2. 0 2. 0 0 281.2 281.2 9 22 ~00mm 2 mm Hole Type hain Type Ordering NO. ST 0N sb-sp/00.00 M olt Holes Tie wrap (TW) (imensions in mm) 2 0 0 0 0 ST 0 V-M 9 9 STST 0 0 V-M V-MST ST 00 V-T V-T ST ST 00 V-S V-S.9 49. -1 49. -1-29 -29 +4 +4 99 1 0 0 49. -1 49. -1-29 -29 +4 0 +4 2222. 1 0 4-Ø(M olt 4-Ø(M Holes) olt Holes) 2222 1 +4-29 -1 49. +4-29 -1 49. 0 0 4-Ø(M olt 4-Ø(M Holes) olt Holes) +4-29 -1 49. +4 0-29 -1 49. ixing28point.. ❸ sb-v/t 22 4-Ø(M 4-Ø(M olt Holes) olt Holes).9.9 1 4-Ø(M 4-Ø(M olt Holes) olt Holes) Moving point 2222 28 2. 0 ree end bracket 9 9 ST ST 00 V-M V-M (imensions in mm) 9 22 ❷ sb-v/m 8. 0 8. 1 ❶ sb-v/s.8.9.0.08..0 2222.1.2.8.0.14.1.88 8. 8. 9. 9. 8. 8. 1 0 1 2 2 290 0 0 4 0 00 Weight kg/m 8. 8. Height (Inner) 1 14 19 2 28 29 4 9 44 49 4 4 ST 0N rame Width (Outer) Height (Outer) 2. 2. 0 0 hain Type ➌ ssemble divider every second frame. V.M : Normal ivider. V.T : pplied to rame ~00. 4. 4... 2 hain Type Ordering No. ST 0N S- TW S-TW S-TW S-TW S-TW0 8 98 2 141 9 148 (imensions in mm) P SYSTM O.,LT. -