Datasheet -- Pressure Sensors: Measurement Type: Absolute; 0 psia to 150 psia, Unamplified, Representative photograph, actual product appearance may vary. Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. Features Low Cost High-Impedance Bridge Absolute and Differential (Gauge) Low Noise Low Power Consumption for Battery Power Typical Applications Medical Instrumentation Barometric Measurement Pneumatic Controls Battery Powered Equipment Description The SX Series pressure sensors provide the lowest cost components for measuring pressures up to 150 psi. These sensors are designed for use with non-corrosive, non-ionic media, such as air and dry gases. Convenient pressure ranges are available to measure differential, gauge, and absolute pressures from 0 psi to 1 psi (SX01) up to 0 psi to 150 psi (SX150). The Absolute (A) devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The differential (D) devices allow application of pressure to either side of the diaphragm and can be used for gauge or differential pressure measurements. This product is packaged in either the standard low cost chip carrier button package, a plastic ported N package, or a DIP package. file:///c /Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20.htm (1 of 5)15/03/2005 02:20:31 ã
Datasheet -- All packages are designed for applications where the sensing element is integral to the OEM equipment. These packages can be o- ring sealed, epoxied, and/or clamped onto a pressure fitting. A closed-bridge four pin SIP configuration is provided for electrical connection to the Button or N Package. The DIP Package mounts on a PC board like a standard IC with through-hole pins. This extremely small size package enables the use of multiple sensors in applications with limited space. Measurement Type Signal Conditioning Pressure Range Maximum Overpressure Supply Voltage Compensated Output Calibration Product Specifications Absolute Unamplified 0 psia to 150 psia 200 psia 12 Vdc max. Response Time 100 µs Termination Port Style Package Style Typical Sensitivity Full Scale Span Zero Pressure Offset Linearity, Repeatability & Hysteresis Error Repeatability Input Resistance Output Resistance No No PCB No Port Button 0.15 mv/v/psi 75 mv min., 110 mv typ., 150 mv max. -35.0 mv min., -20.0 mv typ., 0.0 mv max. - 0.5 min., 0.2 typ., 0.5 max. % Full Scale Span 0.5 % span 4.1 kohms typ. 4.1 kohms typ. file:///c /Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20.htm (2 of 5)15/03/2005 02:20:31 ã
Datasheet -- Operating Temperature Range Storage Temperature Range Media Compatibility UNSPSC Code 411121 UNSPSC Commodity Comment Availability Series Name -40 C to 85 C [-40 F to 185 F] -55 C to 125 C [-67 F to 257 F] Clean, dry gases only 411121 Transducers Lead Temperature Soldering 2 s to 4 s at 250 C [482 F] Global SX Series file:///c /Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20.htm (3 of 5)15/03/2005 02:20:31 ã
Datasheet -- [Electrical Connections] file:///c /Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20.htm (4 of 5)15/03/2005 02:20:31 ã
Datasheet -- [Equivalent circuit] PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. MISUSE OF DOCUMENTATION The information presented in this product sheet (or catalog) is for reference only. DO NOT USE this document as product installation information. Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Copyright Honeywell Inc.1998-2004 All rights reserved. file:///c /Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20.htm (5 of 5)15/03/2005 02:20:31 ã