HIGH PRESSURE NOZZLES 2010 Catalog 10,000-40,000 PSI 690-2758 Bar
Gardner Denver Water Jetting Systems, Inc. publishes various guides for the safe use of Water Blasting Equipment and also recommends that all personnel are made familiar with "RECOMMENDED PRACTICES FOR THE USE OF MANUALLY OPERATED HIGH PRESSURE WATER JETTING EQUIPMENT" published by the Water Jet Technology Association These publications can be obtained free of charge by contacting Gardner Denver Water Jetting Systems, Inc. 1-800-231-3628 All contents of this catalog are copyrighted 2010 by Gardner Denver Water Jetting Systems, Inc., Houston, Texas. Permission must be granted before reproducing any part of this publication.
CONTENTS HIGH PRESSURE NOZZLES 2010 CATALOG PAGE REFERENCE SECTION 2-5 SELECTION GUIDES/FLOW CHARTS 6 SAPPHIRE INSERT FLOW CHART 7 RIGID LANCE PRESSURE DROPS 8 TUBE SIZE DATA 9-12 PRESSURE DROP CHARTS - WATERBLAST HOSES & FLEX LANCES PAGE 15K NOZZLES 13 15K FEMALE AP STYLE 14 15K FEMALE NPT STYLE 15 15K FEMALE MULTI-GROOVE 16 15K BUTTON TIP NOZZLES 17 15K PENETRATOR NOZZLES 18 15K EVAPORATOR NOZZLES 19 15K TLX NOZZLES 20 15K MALE MACHINE SCREW NOZZLES PAGE 20K NOZZLES 21 20K TLX NOZZLES 22 20K STANDARD NOZZLES 23 20K BUTTON TIP NOZZLES PAGE 40K NOZZLES 24 40K TLX NOZZLES 25 40K STANDARD NOZZLES 26 40K BUTTON TIP NOZZLES 27-29 40K LANCE NOZZLES 30 40K SAPPHIRE NOZZLE INSERTS 31 VIPER HP NOZZLES 31 VIPER ORIFICE & JEWEL ASSEMBLIES PAGE HARD HITTERS 32-33 15K HARD HITTER NOZZLES 34 10K LARGE T.C. HARD HITTERS PAGE FAN TIPS 35-36 10-15K FAN TIP NOZZLES PAGE SURFACE CLEANING 37 ULTRA-POLISHED I.D. STRAIGHT JET 38 SURFACE CLEANING NOZZLES / INSERTS 39 BARRACUDA SELF-ROTATING NOZZLES 40-41 SALO-JET ORBITAL JET NOZZLES PAGE LINE MOLES 42 TUBE SPINNING NOZZLES 43 PINEAPPLE TYPE LINE MOLES 44-45 LINE MOLE INSERTS PAGE ABRASIVE NOZZLES 46-47 ABRASIVE JET CUTTING 48 ABRASIVE JET INJECTOR NOZZLES PAGE SAFETY ACCESSORIES 49 FLEX LANCE SAFETY GUARD 49 ANTI-WITHDRAWAL DEVICE 49 LINE MOLE BLOW-OUT PREVENTER PAGE WARRANTY 50 SAFETY INFORMATION 51-52 CONDITIONS OF SALE & WARRANTY 1
Select the Proper Nozzle Flow Rating Selection Guide Drilled Nozzle Rating Flow Chart FLOW NOZZLE FLOW IN GPM PER ORIFICE AT THIS PRESSURE (PSI) RATING ORIFICE 4,000 5,000 6,000 7,000 8,000 9,000 10,000 NO. DIA./INS. PSI PSI PSI PSI PSI PSI PSI 0.12 0.012 0.218 0.243 0.266 0.288 0.308 0.326 0.344 0.13 0.013 0.255 0.285 0.313 0.338 0.361 0.383 0.404 0.16 0.016 0.387 0.432 0.474 0.512 0.547 0.580 0.612 0.18 0.018 0.490 0.547 0.600 0.648 0.692 0.734 0.774 0.20 0.020 0.604 0.676 0.740 0.799 0.855 0.907 0.956 0.21 0.021 0.666 0.745 0.816 0.881 0.942 0.999 1.053 0.22 0.022 0.731 0.818 0.896 0.967 1.034 1.097 1.156 0.24 0.024 0.870 0.973 1.066 1.151 1.231 1.305 1.376 0.25 0.025 0.944 1.056 1.156 1.249 1.335 1.416 1.493 0.26 0.026 1.021 1.142 1.251 1.351 1.444 1.532 1.615 0.28 0.028 1.184 1.324 1.451 1.567 1.675 1.777 1.873 0.31 0.031 1.452 1.623 1.778 1.921 2.053 2.178 2.296 0.32 0.032 1.547 1.730 1.895 2.047 2.188 2.321 2.446 2 0.036 1.958 2.189 2.298 2.590 2.769 2.937 3.096 3 0.043 2.794 3.123 3.421 3.696 3.951 4.190 4.417 4 0.047 3.337 3.731 4.088 4.415 4.720 5.006 5.277 5 0.052 4.085 4.568 5.003 5.404 5.778 6.128 6.459 6 0.059 5.259 5.880 6.441 6.957 7.438 7.889 8.316 7 0.062 5.808 6.493 7.113 7.683 8.213 8.712 9.183 8 0.067 6.782 7.583 8.306 8.972 9.591 10.173 10.724 9 0.071 7.616 8.515 9.328 10.075 10.771 11.424 12.042 10 0.075 8.498 9.502 10.408 11.242 12.019 12.748 13.437 12 0.082 10.159 11.358 12.442 13.439 14.367 15.238 16.063 14 0.089 11.967 13.380 14.657 15.831 16.924 17.951 18.922 15 0.093 13.067 14.610 16.004 17.286 18.480 19.601 20.661 20 0.106 16.976 18.980 20.791 22.457 24.007 25.464 26.841 30 0.130 25.533 28.547 31.272 33.777 36.109 38.300 40.372 40 0.156 36.768 41.108 45.031 48.639 51.998 55.152 58.135 2
FLOW 15,000 20,000 25,000 30,000 36,000 40,000 RATING PSI PSI PSI PSI PSI PSI NO. 0.421 0.486 0.544 0.596 0.653 0.688 0.12 0.494 0.571 0.638 0.699 0.766 0.807 0.13 0.749 0.865 0.967 1.059 1.160 1.223 0.16 0.948 1.095 1.224 1.341 1.469 1.548 0.18 1.170 1.351 1.511 1.655 1.813 1.911 0.20 1.290 1.490 1.666 1.825 1.999 2.107 0.21 1.416 1.635 1.828 2.003 2.194 2.312 0.22 1.685 1.946 2.176 2.383 2.611 2.752 0.24 1.829 2.111 2.361 2.586 2.833 2.986 0.25 1.978 2.284 2.553 2.797 3.064 3.230 0.26 2.294 2.649 2.961 3.244 3.553 3.746 0.28 2.812 3.247 3.630 3.976 4.356 4.591 0.31 2.996 3.459 3.868 4.237 4.641 4.892 0.32 3.792 4.378 4.895 5.362 5.874 6.192 2 5.410 6.247 6.984 7.650 8.381 8.834 3 6.463 7.463 8.344 9.140 10.012 10.554 4 7.911 9.135 10.213 11.188 12.256 12.919 5 10.184 11.760 13.148 14.403 15.778 16.631 6 11.247 12.986 14.519 15.905 17.423 18.365 7 13.134 15.165 16.955 18.574 20.346 21.447 8 14.749 17.030 19.040 20.858 22.848 24.084 9 16.457 19.003 21.246 23.274 25.495 26.875 10 19.673 22.716 25.397 27.821 30.477 32.125 12 23.175 26.760 29.918 32.774 32.747 34.519 14 25.305 29.219 32.668 35.786 35.902 37.844 15 32.874 37.959 42.440 46.490 45.325 47.777 20 49.445 57.094 63.833 69.926 70.821 74.652 30 71.201 82.215 91.920 100.693 88.837 93.643 40 How to Select the Correct Nozzle Flow Rating 1. Obtain your pump performance data: say 12 GPM @ 10,000 PSI. 2. Calculate pressure loss through hose and fi ttings to the nozzle: say 1,000 PSI. 3. Pressure at Nozzle = 10,000-1,000 = 9,000 PSI, Flow = 12 GPM. 4. On Nozzle Rating Chart, select the column for pressure 9,000 PSI. 5. Move down column until the fl ow nearest to 12 GPM is found, then read across to the left to fi nd the fl ow rating. To order nozzles: Quote the part number shown for the nozzle you have selected and insert the fl ow rating in the parenthesis after the part number. 3Selection Guide
Select the Proper Nozzle Flow Rating Selection Guide Tungsten Carbide Nozzle Rating Flow Chart FLOW NOZZLE FLOW IN GPM PER ORIFICE AT THIS PRESSURE (PSI) RATING ORIFICE 2,000 2,500 3,000 3,500 4,000 5,000 6,000 NO. DIA./INS. PSI PSI PSI PSI PSI PSI PSI 0.15 0.015 0.291 0.325 0.356 0.385 0.412 0.460 0.504 0.16 0.016 0.331 0.370 0.406 0.438 0.468 0.524 0.574 0.18 0.018 0.419 0.469 0.513 0.554 0.593 0.663 0.726 0.20 0.020 0.517 0.579 0.634 0.685 0.732 0.818 0.896 0.21 0.021 0.570 0.638 0.699 0.755 0.807 0.902 0.988 0.22 0.022 0.626 0.700 0.767 0.828 0.885 0.990 1.084 0.24 0.024 0.745 0.833 0.913 0.986 1.054 1.178 1.291 0.25 0.025 0.809 0.904 0.990 1.070 1.143 1.278 1.400 0.26 0.026 0.875 0.978 1.071 1.157 1.237 1.383 1.515 0.28 0.028 1.014 1.134 1.242 1.342 1.434 1.604 1.757 0.29 0.029 1.088 1.216 1.332 1.439 1.539 1.720 1.884 0.31 0.031 1.243 1.390 1.523 1.645 1.758 1.966 2.153 0.32 0.032 1.325 1.481 1.622 1.752 1.873 2.095 2.294 2 0.036 1.677 1.874 2.053 2.218 2.371 2.651 2.904 3 0.043 2.392 2.674 2.930 3.164 3.383 3.782 4.143 4 0.047 2.858 3.195 3.500 3.780 4.041 4.518 4.950 5 0.052 3.498 3.911 4.284 4.627 4.947 5.531 6.059 6 0.059 4.503 5.035 5.515 5.957 6.368 7.120 7.800 7 0.062 4.973 5.560 6.090 6.578 7.033 7.863 8.613 8 0.067 5.807 6.493 7.112 7.682 8.213 9.182 10.058 9 0.069 6.521 7.291 7.987 8.627 9.222 10.311 11.295 10 0.075 7.277 8.736 8.912 9.626 10.291 11.506 12.604 11 0.078 7.871 8.800 9.639 10.412 11.131 12.444 13.632 12 0.082 8.698 9.725 10.653 11.507 12.302 13.754 15.066 14 0.089 10.247 11.456 12.550 13.555 14.491 16.202 17.748 16 0.095 11.675 13.053 14.229 15.445 16.511 18.460 20.222 18 0.100 12.936 14.463 15.844 17.113 18.295 20.454 22.407 20 0.106 14.535 16.251 17.802 19.229 20.556 22.983 25.176 4
FLOW 7,000 8,000 9,000 10,000 15,000 20,000 RATING PSI PSI PSI PSI PSI PSI NO. 0.545 0.582 0.617 0.651 0.797 0.920 0.15 0.620 0.662 0.703 0.741 0.907 1.047 0.16 0.784 0.838 0.889 0.937 1.148 1.325 0.18 0.968 1.035 1.098 1.157 1.417 1.636 0.20 1.067 1.141 1.210 1.276 1.562 1.804 0.21 1.171 1.252 1.328 1.400 1.715 1.980 0.22 1.394 1.490 1.581 1.666 2.041 2.356 0.24 1.513 1.617 1.715 1.808 2.214 2.557 0.25 1.636 1.749 1.855 1.955 2.395 2.765 0.26 1.897 2.028 2.151 2.268 2.778 3.207 0.28 2.035 2.176 2.308 2.433 2.979 3.440 0.29 2.326 2.486 2.637 2.780 3.405 3.931 0.31 2.478 2.649 2.810 2.962 3.628 4.189 0.32 3.137 3.353 3.557 3.749 4.591 5.302 2 4.475 4.784 5.074 5.349 6.551 7.564 3 5.346 5.715 6.062 6.390 7.826 9.037 4 6.544 6.996 7.420 7.822 9.580 11.062 5 8.425 9.006 9.553 10.069 12.332 14.240 6 9.303 9.946 10.549 11.119 13.619 15.725 7 10.864 11.614 12.319 12.985 15.904 18.364 8 12.200 13.043 13.834 14.582 17.859 20.622 9 13.614 14.554 15.436 16.271 19.928 23.011 10 14.724 15.741 16.696 17.599 21.554 24.889 11 16.273 17.397 18.452 19.450 23.822 27.507 12 19.170 20.494 21.737 22.913 28.063 32.404 14 21.842 23.350 24.767 26.106 31.974 36.920 16 24.202 25.873 27.442 28.927 35.428 40.909 18 27.193 29.071 30.834 32.502 39.807 45.965 20 How to Select the Correct Nozzle Flow Rating 1. Obtain your pump performance data: say 12 GPM @ 10,000 PSI. 2. Calculate pressure loss through hose and fi ttings to the nozzle: say 1,000 PSI. 3. Pressure at Nozzle = 10,000-1,000 = 9,000 PSI, Flow = 12 GPM. 4. On Nozzle Rating Chart, select the column for pressure 9,000 PSI. 5. Move down column until the fl ow nearest to 12 GPM is found, then read across to the left to fi nd the fl ow rating. To order nozzles: Quote the part number shown for the nozzle you have selected and insert the fl ow rating in the parenthesis after the part number. 5Selection Guide
Sapphire Insert Assembly Flow Chart Selection Guide 6 ORIFICE DIA./INS. FLOW - GPM @ PRESSURE INDICATED 20 KPSI (1379 Bar) 25 KPSI (1723 Bar) 30 KPSI (2068 Bar) 36 KPSI (2482 Bar) 40 KPSI (2758 Bar) 0.002 0.012 0.013 0.014 0.016 0.017 0.003 0.026 0.030 0.032 0.036 0.037 0.004 0.047 0.053 0.058 0.063 0.067 0.005 0.074 0.082 0.090 0.099 0.104 0.006 0.106 0.118 0.130 0.142 0.150 0.007 0.144 0.161 0.177 0.193 0.204 0.008 0.188 0.210 0.231 0.253 0.266 0.009 0.238 0.266 0.292 0.320 0.337 0.010 0.294 0.329 0.360 0.395 0.416 0.011 0.356 0.398 0.436 0.478 0.503 0.012 0.424 0.474 0.519 0.568 0.599 0.013 0.497 0.556 0.609 0.667 0.703 0.014 0.577 0.645 0.706 0.774 0.815 0.015 0.662 0.740 0.811 0.888 0.936 0.016 0.753 0.842 0.922 1.010 1.065 0.017 0.850 0.950 1.041 1.141 1.202 0.018 0.953 1.066 1.167 1.279 1.348 0.019 1.062 1.187 1.301 1.425 1.502 0.020 1.177 1.316 1.441 1.579 1.664 0.021 1.297 1.450 1.589 1.740 1.835 0.022 1.424 1.592 1.744 1.910 2.013 0.023 1.556 1.740 1.906 2.088 2.201 0.024 1.694 1.894 2.075 2.273 2.396 0.025 1.838 2.055 2.252 2.467 2.600 0.026 1.988 2.223 2.435 2.668 2.812 0.027 2.144 2.398 2.626 2.877 3.033 0.028 2.306 2.578 2.824 3.094 3.261 0.029 2.474 2.766 3.030 3.319 3.499 0.030 2.647 2.960 3.242 3.552 3.744 0.031 2.827 3.161 3.462 3.793 3.998 0.032 3.012 3.368 3.689 4.041 4.260 0.033 3.203 3.581 3.923 4.298 4.530 0.034 3.400 3.802 4.165 4.562 4.809 0.035 3.603 4.029 4.413 4.834 5.096 0.036 3.812 4.262 4.669 5.115 5.391 0.037 4.027 4.502 4.932 5.403 5.695 0.038 4.248 4.749 5.202 5.699 6.007 0.039 4.474 5.002 5.480 6.003 6.327 0.042 5.189 5.801 6.355 6.962 7.338 0.052 7.954 8.893 9.742 10.671 11.249
Rigid Lance Pressure Drop Chart Lancing System flow capacity is almost always limited by lance pressure drop. OD, In. ID, In. @5 GPM PRESSURE DROP, PSI @10 GPM @20 GPM @40 GPM @60 GPM @100 GPM CAPACITY, GPM** PIPE LANCE, 4130 or 304, 25 Ft. 1/8" Sch. 80 Pipe, 15 KPSI 0.405 0.215 480 1900 7800 * * * 9 1/8" Sch. 40 Pipe, 15 KPSI 0.405 0.215 160 630 2500 * * * 13 1/4" Sch. 80 Pipe, 15 KPSI 0.540 0.302 89 350 1400 5700 * * 21 1/4" Sch. 40 Pipe, 10 KPSI 0.540 0.364 35 140 560 2200 5000 * 27 3/8" Sch. 80 Pipe, 10 KPSI 0.675 0.423 16 66 260 1100 2400 6600 39 1/2" Sch. 80 Pipe, 10 KPSI 0.840 0.546 5 18 73 290 660 1800 74 1/2" Sch. 160 Pipe, 15 KPSI 0.840 0.464 10 41 170 660 1500 4100 60 3/4" Sch. 160 Pipe, 15 KPSI 1.050 0.612 3 10 40 170 370 1000 120 1" Sch. 160 Pipe, 10 KPSI 1.320 0.464 1 2 10 38 86 240 204 Selection Guide TUBING LANCE, 4130 or 304 SS 1/8 Hard, 25 Ft. 1/4" OD x.084 Wall, 36 KPSI 0.250 0.083 * * * * * * 1.3 1/4" OD x.070 Wall, 20 KPSI 0.250 0.109 * * * * * * 1.9 3/8" OD x.125 Wall, 36 KPSI 0.375 0.125 7300 * * * * * 3.5 3/8" OD x.086 Wall, 20 KPSI 0.375 0.203 640 2600 * * * * 9 9/16" OD x.156 Wall, 0.563 0.188 950 3800 * * * * 10 36 KPSI 9/16" OD x.125 Wall, 0.563 0.312 75 300 1200 4800 * * 26 20 KPSI 3/4" OD x.156 Wall, 20 KPSI 0.750 0.438 14 55 220 880 2000 5500 60 1" OD x.249 Wall, 20 KPSI 1.000 0.502 7 28 110 450 1000 2800 85 * 10,000 or greater ** Capacity fi gured at pressure drop = 10% of rated pressure. 7
Tube Size Data Selection Guide BOILER TUBE SIZE DATA OUTSIDE DIAMETER 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 3" 3-1/4" 3-1/2" 4" WALL THICKNESS, BWG WALL THICKNESS, DECIMAL INSIDE DIAMETER 13 0.095 0.805 12 0.109 0.782 11 0.120 0.760 10 0.134 0.732 13 0.095 1.060 12 0.109 1.032 11 0.120 1.010 10 0.134 0.982 9 0.148 0.954 14 0.083 1.334 13 0.095 1.310 12 0.109 1.282 11 0.120 1.260 10 0.134 1.232 13 0.095 1.560 12 0.109 1.532 11 0.120 1.510 13 0.095 1.810 12 0.109 1.782 11 0.120 1.760 10 0.134 1.732 9 0.148 1.704 8 0.165 1.670 7 0.180 1.640 12 0.109 2.032 11 0.120 2.010 10 0.134 1.982 12 0.109 2.282 11 0.120 2.260 10 0.134 2.232 9 0.148 2.204 12 0.109 2.782 11 0.120 2.760 10 0.134 2.732 9 0.148 2.704 8 0.165 2.670 7 0.180 2.640 12 0.109 3.032 11 0.120 3.010 10 0.134 2.982 9 0.148 2.954 8 0.165 2.920 12 0.109 3.282 11 0.120 3.260 10 0.134 3.232 9 0.148 3.204 10 0.134 3.732 9 0.148 3.704 8 0.165 3.670 7 0.180 3.640 6 0.203 3.594 OUTSIDE DIAMETER 1" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2" TUBE SIZE DATA WALL THICKNESS, BWG WALL THICKNESS, DECIMAL INSIDE DIAMETER 20 0.035 0.430 18 0.049 0.402 16 0.065 0.370 15 0.072 0.356 14 0.083 0.334 20 0.035 0.555 18 0.049 0.527 16 0.065 0.495 15 0.072 0.481 14 0.083 0.459 13 0.095 0.435 12 0.109 0.407 11 0.120 0.385 18 0.049 0.652 16 0.065 0.620 15 0.072 0.606 14 0.083 0.584 13 0.095 0.465 12 0.109 0.532 11 0.120 0.510 18 0.049 0.777 16 0.065 0.745 15 0.072 0.731 14 0.083 0.709 13 0.095 0.685 12 0.109 0.657 11 0.120 0.635 18 0.049 0.902 16 0.065 0.870 15 0.072 0.856 14 0.083 0.834 13 0.095 0.810 12 0.109 0.782 11 0.120 0.760 10 0.134 0.732 9 0.148 0.704 18 0.049 1.152 16 0.065 1.120 15 0.072 1.106 14 0.083 1.084 13 0.095 1.060 12 0.109 1.030 11 0.120 1.010 10 0.134 0.982 9 0.148 0.954 18 0.049 1.402 16 0.065 1.370 15 0.072 1.356 14 0.083 1.334 13 0.095 1.310 12 0.109 1.282 11 0.120 1.260 10 0.134 1.232 9 0.148 1.204 8
Pressure Drop Chart 50 Ft. Rubber Water Blast Hose PRESSURE DROP CALCULATED FOR RUBBER WATER BLAST HOSE - 50 FT. SECTIONS PRESSURE DROP - PSI GPM/DIA. 1/4" 3/8" 1/2" 3/4" 1" 6 625 87 22 3-8 1064 148 36 5 1 10 1608 223 55 8 2 12 2253 313 77 11 3 14 2997 416 103 14 4 16 3837 533 132 18 5 18 4771 662 164 23 6 20 5798 805 198 28 7 25 8760 1216 299 42 10 30 12275 1704 419 58 14 35-2266 559 77 19 40-2901 715 99 24 45-3607 889 123 31 50-4384 1080 150 37 55-5229 1288 178 44 60-6142 1514 210 52 65-7123 1755 244 61 70-8170 2013 279 69 75-9282 2287 318 77 80-10459 2576 359 88 85 - - 2882 399 97 90 - - 3204 445 110 95 - - 3542 492 120 100 - - 3993 541 133 110 - - 4644 646 158 120 - - 5419 758 187 130 - - 6325 879 216 140 - - 7256 1009 248 150 - - 8243 1144 281 9Selection Guide
Pressure Drop Charts - Water Blast Hoses / Flex Lances Selection Guide Results obtained from actual pressure drop tests, pumping water through hose assemblies with normal end fittings. 10
Water Blast Hoses / Flex Lances - Pressure Drop Charts Results obtained from actual pressure drop tests, pumping water through hose assemblies with normal end fittings. 11Selection Guide
Pressure Drop Charts - Water Blast Hoses / Flex Lances Selection Guide Results obtained from actual pressure drop tests, pumping water through hose assemblies with normal end fittings. 12
FEMALE NPT NOZZLES AP STYLE Applications/Features: DRILLING LOCATIONS 90 O C2 90 O C1 45 O D 45 O B 15K The AFNPT nozzles feature the slimline design and shorter overall length for ease of movement through almost any size tubing. This is the most economical nozzle in the Gardner Denver Water Jetting Systems nozzle line, featuring high production rates and long service life typical of all GDWJS nozzles. Maximum allowable working pressure = 15,000 PSI (1034 Bar). 45 O D 90 O C2 90 O C1 45 O B A How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77103001-8 describes an AFNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 1/16" NPT 0.375" O.D. 0.875" 1/8" NPT 0.468" O.D. 0.937" 1/4" NPT 0.625" O.D. 1.250" 3/8" NPT 0.875" O.D. 1.480" 1/2" NPT 1.000" O.D. 1.625" 3/4" NPT 1.250" O.D. 2.000" AFNPT 11 77103001-(_) AFNPT 21 77103010-(_) AFNPT 41 77103028-(_) AFNPT 51 77103037-(_) 12 @ D (45 O ) AFNPT 61 77103046-(_) 1 AFNPT 71 77103057-(_) 1 AFNPT 12 77103003-(_) AFNPT 23 77103012-(_) AFNPT 43 77103030-(_) AFNPT 53 77103039-(_) 12 @ D (45 O ) AFNPT 63 77103048-(_) 3 @ B (45O), 12 @ D (45 O ) AFNPT 73 77103058-(_) 1 AFNPT 15 77103005-(_) 3 @ C1 (90 O ), AFNPT 25 77103014-(_) 3 @ C1 (90 O ), AFNPT 45 77103032-(_) 4 @ C1 (90 O ), AFNPT 55 77103041-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) AFNPT 65 77103050-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) AFNPT 75 77103060-(_) 6 @ C1 (90 O ) 12 @ D (45 O ) AFNPT 17 77103007-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) AFNPT 27 77103016-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) AFNPT 47 77103034-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ) AFNPT 57 77103043-(_) 8 @ C1 (90O), 8 @ C2 (90O) AFNPT 67 77103052-(_) 12 @ C1 (90 O ), 12 @ C2 (90 O ) AFNPT 77 77103062-(_) 12 @ C1 (90 O ) 12 @ C2 (90 O ) 13
FEMALE NPT NOZZLES 15K DRILLING LOCATIONS 90 O C2 90 O C1 45 O D 45 O B Applications/Features: A These nozzles are for use with Flex or Rigid Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. Wrench fl ats are provided for ease of installation. Gardner Denver Water Jetting Systems special design features: Slimline design which ensures compact Lance/Nozzle combinations, resulting in greater productivity and longer service life. 45 O D 90 O C2 90 O C1 45 O B Maximum allowable working pressure = 15,000 PSI (1034 Bar). 1/16" NPT 0.375" O.D. 1.250" 1/8" NPT 0.468" O.D. 1.500" 1/4" NPT 0.625" O.D. 1.750" 3/8" NPT 0.875" O.D. 1.750" 1/2" NPT 1.000" O.D. 2.000" FNPT 11 77102001-(_) FNPT 21 77102010-(_) FNPT 41 77102028-(_) FNPT 51 77102037-(_) 12 @ D (45 O ) FNPT 61 77102046-(_) 1 FNPT 12 77102003-(_) FNPT 23 77102012-(_) FNPT 43 77102030-(_) FNPT 53 77102039-(_) 12 @ D (45 O ) FNPT 63 77102048-(_) 12 @ D (45 O ) FNPT 15 77102005-(_) 3 @B(45 O ), 3 @ C1 (90 O ), FNPT 25 77102014-(_) 3 @ B (45O), 3 @ C1 (90 O ), FNPT 45 77102032-(_) 3 @ B(45 O ), 4 @ C1 (90 O ), FNPT 55 77102041-(_) 3 @ B(45 O ), 6 @ C1 (90 O ), 12 @ D (45 O ) FNPT 65 77102050-(_) 3 @ B(45 O ), 6 @ C1 (90 O ), 12 @ D (45 O ) FNPT 17 77102007-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) FNPT 27 77102016-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) FNPT 47 77102034-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ) FNPT 57 77102043-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ) FNPT 67 77102052-(_) 12 @ C1 (90 O ), 12 @ C2 (90 O ) How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77102001-8 describes an FNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 14
MULTI-GROOVE FEMALE NPT NOZZLES 15K Applications/Features: These nozzles are for use with Flex or Rigid Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. Wrench fl ats are provided for ease of installation. The MULTI-GROOVE NPT nozzle features a combination of cleaning power and strong pulling force. This special high production design is found only on Gardner Denver Water Jetting Systems MULTI-GROOVE nozzles. Maximum allowable working pressure = 15,000 PSI (1034 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77103001-8 describes an AFNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 1/16" NPT 0.375" O.D. 1.355" 1/8" NPT 0.468" O.D. 1.625" 1/4" NPT 0.625" O.D. 1.875" MGFNPT 11 77107001-(_) 2 @ B (45 O ), 3 rows 4D (30 O ) MGFNPT 21 77107006-(_) 3 rows 6D (30 O ) MGFNPT 41 77107016-(_) 3 rows 8D (30 O ) MGFNPT 12 77107002-(_) 2 @ B (45 O ), 3 rows 4D (60 O ) MGFNPT 22 77107007-(_) 3 rows 6D (60 O ) MGFNPT 42 77107017-(_) 3 rows 8D (60 O ) MGFNPT 13 77107003-(_) 3 rows 6D (45 O ) MGFNPT 23 77107008-(_) 3 rows 6D (45 O ) MGFNPT 43 77107018-(_) 3 rows 8D (45 O ) MGFNPT 14 77107004-(_) 2 rows 6D (45 O ) MGFNPT 24 77107009-(_) 2 rows 6D (45 O ) MGFNPT 44 77107019-(_) 2 rows 8D (45 O ) 3/8" NPT 0.875" O.D. 1.769" MGFNPT 51 77107021-(_) 3 rows 8D (30 O ) MGFNPT 52 77107022-(_) 3 rows 8D (60 O ) MGFNPT 53 77107023-(_) 3 rows 8D (45 O ) MGFNPT 54 77107024-(_) 2 rows 12D (45 O ) 1/2" NPT 1.000" O.D. 2.0625" MGFNPT 61 77107026-(_) 3 rows 8D (30 O ) MGFNPT 62 77107027-(_) 3 rows 8D (60 O ) MGFNPT 63 77107028-(_) 3 rows 8D (45 O ) MGFNPT 64 77107029-(_) 8 @ C (90 O ) 2 rows 12D (45 O ) 15
BUTTON TIPS WITH FEMALE NPT THREADS 15K Applications/Features: These nozzles are for use with Flex Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. The ULTRA COMPACT design of these BUTTON TIP nozzles enables the cleaning of small diameter tubes with small radius bends. Maximum allowable working pressure = 15,000 PSI (1034 Bar). 1/16" NPT 0.375" O.D. 0.500" 1/8" NPT 0.500" O.D. 0.590" 1/4" NPT 0.625" O.D. 0.825" BTNPT 01 77106037-(_) BTNPT 11 77106001-(_) BTNPT 21 77106010-(_) BTNPT 02 77106038-(_) 6 @ D (60 O ) BTNPT 12 77106002-(_) 8 @ D (60 O ) BTNPT 22 77106011-(_) 8 @ D (60 O ) BTNPT 03 77106039-(_) BTNPT 13 77106003-(_) 12 @ D (45 O ) BTNPT 23 77106012-(_) 12 @ D (45 O ) BTNPT 04 77106040-(_) 3 @ C (90 O ), BTNPT 14 77106004-(_) 4 @ C (90 O ), BTNPT 24 77106013-(_) 4 @ C (90 O ), How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77102001-8 describes an FNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 3/8" NPT 0.875" O.D. 1.000" BTNPT 31 77106019-(_) 12 @ D (45 O ) BTNPT 32 77106020-(_) 12 @ D (60 O ) BTNPT 33 77106021-(_) 12 @ D (45 O ) BTNPT 34 77106022-(_) 4 @ C (90 O ), 12 @ D (45 O ) BTNPT 44 106031-(_) 6 @ C (90 O ), 12 @ D (45 O ) 1/2" NPT 1.000" O.D. 1.125" BTNPT 41 106028-(_) 1 BTNPT 42 106029-(_) 16 @ D (60 O ) BTNPT 43 106030-(_) 16 @ D (30 O ) 16
PENETRATORS ETRATORS WITH FEMALE NPT THREADS 15K Applications/Features: These nozzles are for use with Flex Lances or Rigid Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. PFNPT Nozzles are designed to clean heavily fouled tubes fast an effi ciently. The unique rounded nose construction allows maximum penetration of the forward jets to blast away blockages while permitting smooth travel through the tubes. Maximum allowable working pressure = 15,000 PSI (1034 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77108001-8 describes a PFNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 0.375" O.D. 1.312" 1/8" NPT 0.468" O.D. 1.500" PFNPT 11 3 @ B (60 O ), 2 @ C1 (45 O ), 2 @ C2 (45 O ), 5 @ D (60 O ) PFNPT 21 77108005-(_) 3 @ B (60 O ), 2 @ C1 (45 O ), 2 @ C2 (45 O ), 10 @ D (60 O ) PFNPT 12 77108002-(_) 3 @ B (60 O ), 4 @ C1 (45 O ), 6 @ D (60 O ) PFNPT 22 77108006-(_) 3 @ B (60 O ), 4 @ C1 (45 O ), 10 @ D (60 O ) PFNPT 13 77108003-(_) 3 @ B (60 O ), 3 Radial @ C2 (90 O ), 6 @ D (60 O ) PFNPT 23 77108007-(_) 3 @ B (60 O ), 6 Radial @ C2 (90 O ), 10 @ D (60 O ) 1/4" NPT 0.625" O.D. 1.750" PFNPT 41 77108013-(_) 3 @ B (60 O ), 2 @ C1 (45 O ), 2 @ C2 (45 O ), 10 @ D (60 O ) PFNPT 42 108014-(_) 3 @ B (60 O ), 4 @ C1 (45 O ), 10 @ D (60 O ) PFNPT 43 77108015-(_) 3 @ B (60 O ), 6 Radial @ C2 (90 O ), 10 @ D (60 O ) 3/8" NPT 0.875" O.D. 1.812" PFNPT 51 77108017-(_) 3 @ B (60 O ), 2 @ C1 (45 O ), 2 @ C2 (45 O ), 10 @ D (60 O ) PFNPT 52 77108018-(_) 3 @ B (60 O ), 4 @ C1 (45 O ), 12 @ D (60 O ) PFNPT 53 77108019-(_) 3 @ B (60 O ), 6 Radial @ C2 (90 O ), 12 @ D (60 O ) 1/2" NPT 1.000" O.D. 2.060" PFNPT 61 77108021-(_) 3 @ B (60 O ), 2 @ C1 (45 O ), 2 @ C2 (45 O ), 12 @ D (60 O ) PFNPT 62 77108022-(_) 3 @ B (60 O ), 4 @ C1 (45 O ), 12 @ D (60 O ) PFNPT 63 77108023-(_) 3 @ B (60 O ), 8 Radial @ C2 (90 O ), 12 @ D (60 O ) 17
EVAPORATORS WITH FEMALE NPT THREADS 15K Applications/Features: These nozzles are for use with Flex Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. Wrench fl ats are provided for ease of installation. The EVNPT Nozzles are designed to clean heavily fouled tubes quickly and effi ciently. The unique rounded nose construction allows maximum penetration of the forward jets to blast away blockages while permitting smooth travel through the tubes. Maximum allowable working pressure = 15,000 PSI (1034 Bar). 0.375" O.D. 0.500" 1/8" NPT 0.500" O.D. 0.590" EVNPT 01 77110027-(_) 3 @ C1 (90 O ), 4 @ D (45 O ) EVNPT 11 77110001-(_) 6 @ C1 (90 O ), EVNPT 02 77110028-(_) 3 @ C1 (90 O ), EVNPT 12 77110002-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) EVNPT 03 77110029-(_) 4 @ C1 (90 O ), EVNPT 13 77110003-(_) 6 @ C1 (90 O ), How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77110001-8 describes a EVNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 1/4" NPT 0.625" O.D. 0.825" EVNPT 31 77110011-(_) 6 @ C1 (90 O ), EVNPT 32 77110012-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) EVNPT 33 77110013-(_) 4 @ C1 (90 O ), 3/8" NPT 0.875" O.D. 1.000" EVNPT 41 77110016-(_) 8 @ C1 (90 O ), EVNPT 42 77110017-(_) 8 @ C1 (90 O ), 1 EVNPT 52 77110022-(_) 8 @ C1 (90 O ), 1 EVNPT 43 77110018-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) EVNPT 53 77110023-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) 1/2" NPT 1.000" O.D. 1.125" BTNPT 41 106028-(_) 1 18
TLX NOZZLES WITH FEMALE NPT THREADS 15K Applications/Features: These nozzles are for use with Flex or Rigid Lances having male NPT threads. They are machined from stainless steel and hardened for longer service life. Wrench fl ats are provided for ease of installation. Gardner Denver Water Jetting Systems special design features: Staggered orifi ces for complete 360O coverage, and either 3 or 4 rows of precision drilled orifi ces for maximum cleaning power. Maximum allowable working pressure = 15,000 PSI (1034 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77109001-8 describes a TLXNPT11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 1/16" NPT 0.375" O.D. 0.500" 1/8" NPT 0.468" O.D. 0.590" 1/4" NPT 0.625" O.D. 0.825" TLXNPT 11 77109001-(_) 4 @ C1 (90 O ), 4 @ C2 (90 O ), 4 @ D (45 O ) TLXNPT 21 77109005-(_) 4 @ C1 (90 O ), 4 @ C2 (90 O ), 4 @ D (45 O ) TLXNPT 41 77109013-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ), TLXNPT 12 77109002-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ), TLXNPT 22 77109006-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ), TLXNPT 42 77109014-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ), TLXNPT 13 77109003-(_) 4 @ C1 (90 O ), 4 @ D1 (45 O ), 4 @ D2 (45 O ) TLXNPT 23 77109007-(_) 6 @ C1 (90 O ), 6 @ D1 (45 O ), 6 @ D2 (45 O ) TLXNPT 43 77109015-(_) 6 @ C1 (90 O ), 6 @ D1 (45 O ), 6 @ D2 (45 O ) TLXNPT 14 77109004-(_) 3 @ B(45 O ), 6 @ C1 (90 O ), 6 @ D1 (45 O ), 6 @ D2 (45 O ) TLXNPT 24 77109008-(_) 8 @C1 (90 O ), 8 @ D1 (45 O ), 8 @ D2 (45 O ) TLXNPT 44 77109016-(_) 8 @ C1 (90 O ), 8 @ D1 (45 O ), 8 @ D2 (45 O ) 3/8" NPT 0.875" O.D. 1.000" TLXNPT 51 77109017-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ), TLXNPT 52 77109018-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ), TLXNPT 53 77109019-(_) 8 @ C1 (90 O ), 8 @ D1 (45 O ), 8 @ C2 (45 O ) TLXNPT 54 771090 -(_) 6 @ C1 (90 O ), 6 @ D1 (45 O ), 6 @ D2 (45 O ) TLXNPT 64 77109024-(_) 6 @ C1 (90 O ), 6 @ D1 (45 O ), 6 @ D2 (45 O ) 1/2" NPT 1.000" O.D. 1.125" TLXNPT 61 77109021-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ), TLXNPT 62 77109022-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ), TLXNPT 63 77109023-(_) 8 @ C1 (90 O ), 8 @ D1 (45 O ), 8 @ D2 (45 O ) 19
MALE MACHINE SCREW THREAD NOZZLES 15K Applications/Features: These nozzles are for use with mechanical type Rigid Tubing or Rigid Pipe Lances having female machine screw threads (UNF or UNC). They are machined from stainless steel and hardened for longer service. Wrench fl ats are provided for ease of installation. The special slimline design ensures that the nozzle diameter is never greater than the diameter of the lance. This compact lance/nozzle combination results in greater productivity and long service life.these features are found only in Gardner Denver Water Jetting Systems MMS Nozzles. Maximum allowable working pressure = 15,000 PSI (1034 Bar). 12-28 UN 0.250" O.D. 1.067" 1/4-28 UN 0.312" O.D. 1.187" 5/16-24 UN 0.375" O.D. 1.455" MMS 11 77104001-(_) MMS 21 77104010-(_) 6 @ B (45 O ) MMS 31 77104019-(_) MMS 13 77104003-(_) MMS 23 77104012-(_) MMS 33 77104021-(_) MMS 15 77104005-(_) 3 @ C1 (90 O ), MMS 25 77104014-(_) 3 @ C1 (90 O ), MMS 35 77104023-(_) 4 @ C1 (90 O ), MMS 17 77104007-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) MMS 27 77104016-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) MMS 37 77104025-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77104001-8 describes a MMS11 nozzle with a fl ow rating of 10 GPM at 10,000 PSI. 5/16-18 UN 0.375" O.D. 1.500" MMS 41 77104028-(_) MMS 43 77104030-(_) MMS 45 77104032-(_) 4 @ C1 (90 O ), 12 @ D (45 O ) MMS 47 77104034-(_) 6 @ C1 (90 O ), 6 @ C2 (90 O ) 3/8-16 UN 0.562" O.D. 1.750" MMS 51 77104037-(_) 12 @ D (45 O ) MMS 53 77104039-(_) 12 @ D (45 O ) MMS 55 77104041-(_) 4 @ C1 (90 O ), 12 @ D (45 O ) MMS 57 77104043-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ) 1/2-20 UN 0.687" O.D. 1.875" MMS 61 77104046-(_) 12 @ D (45 O ) MMS 63 77104048-(_) 3 @ B(45 O ), 12 @ D (45 O ) MMS 65 77104050-(_) 6 @ C1 (90 O ), 12 @ D (45 O ) MMS 67 77104052-(_) 8 @ C1 (90 O ), 8 @ C2 (90 O ) 20
20K TLX NOZZLES Applications/Features: These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type Medium Pressure threads. The TLX Nozzle features a special metal-to-metal seat design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 20,000 PSI. Wrench fl ats are provided for ease of installation on the lance. 20K Maximum allowable working pressure = 20,000 PSI (1379 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77134001-2 describes a 20KTLX01 nozzle with a fl ow rating of 4.3 GPM at 20,000 PSI. 1/4" MP 0.375" O.D. 1.337" 3/8" MP 0.468" O.D. 1.650" NOZZLE TYPE: NOZZLE TYPE: 20KTLX 01 77134001-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KTLX 11 77134004-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KTLX 02 77134002-(_) 20KTLX 12 77134005-(_) 20KTLX 03 77134003-(_) 3 @ C1 (90 O ), 20KTLX 13 77134006-(_) 3 @ C1 (90 O ), 20KTLX 04 77134010-(_) 3 @ C1 (90 O ), 20KTLX 14 77134011-(_) 3 @ C1 (90 O ), 9/16" MP 0.687" O.D. 2.000" NOZZLE TYPE: 20KTLX 21 77134007-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KTLX 22 77134008-(_) 2 @ B (45 O ), 20KTLX 23 77134009-(_) 3 @ C1 (90 O ), 20KTLX 24 77134012-(_) 4 @ C1 (90 O ), Note: Must specify Right Hand or Left Hand nozzles when ordering. 21
20K STANDARD NOZZLES Applications/Features: 20K These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type Medium Pressure threads. This Nozzle features a special metal-to-metal seating design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 20,000 PSI. Wrench fl ats are provided for ease of installation on the lance. Maximum allowable working pressure = 20,000 PSI (1379 Bar). 1/4" MP 0.375" O.D. 1.225" 3/8" MP 0.468" O.D. 1.375" 20KSTD 01 77134101-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KSTD 11 77134104-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KSTD 02 77134102-(_) 20KSTD 12 77134105-(_) 20KSTD 03 77134103-(_) 3 @ C (90 O ), 20KSTD 13 77134106-(_) 3 @ C (90 O ), 20KSTD 04 77134111-(_) 3 @ C (90 O ), 20KSTD 14 77134112-(_) 3 @ C (90 O ), How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77134101-2 describes a 20KSTD01 nozzle with a fl ow rating of 4.3 GPM at 20,000 PSI. 9/16" MP 0.687" O.D. 1.562" 20KSTD 21 77134107-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KSTD 22 77134108-(_) 20KSTD 23 77134109-(_) 3 @ C (90 O ), 20KSTD 24 77134113-(_) 4 @ C (90 O ), Note: Must specify Right Hand or Left Hand nozzles when ordering. 22
20K MEDIUM PRESSURE BUTTON TIPS Applications/Features: These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type Medium Pressure threads. 20K This Nozzle features a special metal-to-metal seating design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 20,000 PSI. Wrench fl ats are provided for ease of installation on the lance. Maximum allowable working pressure = 20,000 PSI (1379 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77134201-2 describes a 20KBT01 nozzle with a fl ow rating of 4.3 GPM at 20,000 PSI. 1/4" MP 0.375" O.D. 1.225" 3/8" MP 0.468" O.D. 1.375" NOZZLE TYPE: NOZZLE TYPE: 20KBT 01 77134201-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KBT 11 77134204-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KBT 02 77134202-(_) 20KBT 12 77134205-(_) 20KBT 03 77134203-(_) 3 @ C (90 O ), 20KBT 13 77134206-(_) 3 @ C (90 O ), 20KBT 04 77134211-(_) 3 @ C (90 O ), 20KBT 14 77134212-(_) 3 @ C (90 O ), 20KBT 24 77134213-(_) 4 @ C (90 O ), 9/16" MP 0.687" O.D. 1.562" NOZZLE TYPE: 20KBT 21 77134207-(_) 2 @ B (45 O ), 2 @ C (90 O ), 20KBT 22 77134208-(_) 20KBT 23 77134209-(_) 3 @ C (90 O ), Note: Must specify Right Hand or Left Hand nozzles when ordering. 23
40K TLX NOZZLES Applications/Features: These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. 40K The TLX Nozzle features a special metal-to-metal design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 40,000 PSI. Wrench fl ats are provided for ease of installation on the lance. Maximum allowable working pressure = 40,000 PSI (2758 Bar). 1/4" HP 0.375" O.D. 1.337" 3/8" HP 0.468" O.D. 1.650" 40KTLX 31 77135007-(_) 2 @ C1 (90 O ), 4 @ D (45 O ) 40KTLX 01 77135001-(_) 2 @ C1 (90 O ), 4 @ D (45 O ) 40KTLX 32 77135008-(_) 4 @ C1 (90 O ) 40KTLX 02 77135002-(_) 4 @ C1 (90 O ) 40KTLX 33 77135009-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KTLX 03 77135003-(_) 2 @ B (45 O ), 3 @ D (45 O ) How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77135001-2RH describes a 40KTLX01-RH is a right handed nozzle with a fl ow rating of 5.874 GPM at 36,000 PSI. 9/16" HP 0.687" O.D. 2.000" 40KTLX 11 77135004-(_) 2 @ C1 (90 O ), 4 @ D (45 O ) 40KTLX 12 77135005-(_) 4 @ C1 (90 O ) 40KTLX 13 77135006-(_) 2 @ B (45 O ), 3 @ D (45 O ) Note: Must specify Right Hand or Left Hand nozzles when ordering. 24
40K STANDARD NOZZLES Applications/Features: These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. This Nozzle features a special metal-to-metal seating design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 40,000 PSI 40K Wrench fl ats are provided for ease of installation on the lance. Maximum allowable working pressure = 40,000 PSI (2758 Bar). How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77135101-2LH describes a 40KSTD11-LH standard nozzle with a fl ow rating of 5.874 GPM at 36,000 PSI. 1/4" HP 0.375" O.D. 1.232" 3/8" HP 0.468" O.D. 1.375" 9/16" HP 0.687" O.D. 1.562" NOZZLE TYPE: NOZZLE TYPE: NOZZLE TYPE: 40KSTD 11 77135108-(_) 2 @ C (90 O ), 3 @ D (45 O ) 40KSTD 11 77135101-(_) 2 @ C (90 O ), 3 @ D (45 O ) 40KSTD 11 77135104-(_) 2 @ C1 (90 O ) 3 @ D (45 O ) 40KSTD 12 77135110-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KSTD 12 77135102-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KSTD 12 77135105-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KSTD 13 77135111-(_) 4 @ D (45 O ) 40KSTD 13 77135103-(_) 4 @ D (45 O ) 40KSTD 13 77135106-(_) 4 @ D (45 O ) 40KSTD 14 77135112-(_) 4 @ C (90 O ) 40KSTD 14 77135113-(_) 4 @ C (90 O ) 40KSTD 14 77135107-(_) 4 @ C (90 O ) Note: Must specify Right Hand or Left Hand nozzles when ordering. 25
40K HIGH PRESSURE BUTTON TIPS Applications/Features: These nozzles are designed specifi cally for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. 40K This Nozzle features a special metal-to-metal seating design which eliminates the use of gland nuts and collars. Manufactured from high strength stainless steel for maximum service life, these nozzles are engineered to withstand the rigors of high pressure applications using 40,000 PSI. Wrench fl ats are provided for ease of installation on the lance. Maximum allowable working pressure = 40,000 PSI (2758 Bar). 1/4" HP 0.375" O.D. 1.232" 3/8" HP 0.468" O.D. 1.375" 40KBT 11 77135208-(_) 2 @ C (90 O ), 3 @ D (45 O ) 40KBT 11 77135201-(_) 2 @ C (90 O ), 3 @ D (45 O ) 40KBT 12 77135210-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KBT 12 77135202-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KBT 13 77135211-(_) 4 @ D (45 O ) 40KBT 13 77135203-(_) 4 @ D (45 O ) 40KBT 14 77135212-(_) 4 @ C1 (90 O ) 40KBT 14 77135213-(_) 4 @ C (90 O ) How To Order: Specify nozzle type or part number from this chart and fl ow rating from pages 2-3. Example: 77135101-2 describes a 36KBT11 nozzle with a fl ow rating of 5.874 GPM at 36,000 PSI. 9/16" HP 0.687" O.D. 1.562" 40KBT 11 77135204-(_) 2 @ C (90 O ) 3 @ D (45 O ) 40KBT 12 77135205-(_) 2 @ B (45 O ), 3 @ D (45 O ) 40KBT 13 77135206-(_) 4 @ D (45 O ) 40KBT 14 77135207-(_) 4 @ C (90 O ) Note: Must specify Right Hand or Left Hand nozzles when ordering. 26
40K TUBE CLEANING WITH SAPPHIRE INSERTS FEMALE 9/16" RH BUTTON END REQUIRES BRASS BUTTON #77408001 Requires Sapphire Inserts (See Page 30 for Selection) See Sapphire Flow Chart on Page 6. 40K PART NO. # JETS DIAMETER, IN., IN. 77408275 4 @ 40 O /60 O.995" O.D. 2.00" OVERALL 77408276 3 @ 15 O.995" O.D. 2.00" OVERALL 77408277 6 @ 30 O /40 O /60 O.995" O.D. 2.00" OVERALL 77408278 4 @ 20 O.995" O.D. 2.00" OVERALL 77408279 4 @ 10 O.995" O.D. 2.75" OVERALL 77408280 2 @ 20 O.995" O.D. 2.00" OVERALL 77408281 2 @ 80 O.995" O.D. 1.50" OVERALL 77408282 2 @ 90 O.995" O.D. 1.575" OVERALL 77408241 4 @ 30 O.995" O.D. 3.125" OVERALL 77408242 4 @ 45 O.995" O.D. 3.125" OVERALL 77408243 4 @ 60 O.995" O.D. 3.125" OVERALL 77408244 2 @ 20 O.995" O.D. 2.475" OVERALL 77408247 4 @ 45 O /60 O.995" O.D. 3.125" OVERALL 77408248 4 @ 20 O.995" O.D. 3.125" OVERALL 27
40K TUBE CLEANING WITH SAPPHIRE INSERTS MALE 7/16"-20 RH BUTTON END REQUIRES BRASS BUTTON #77408001 Requires Sapphire Inserts (See Page 30 for Selection) See Sapphire Flow Chart on Page 6. 40K PART NO. # JETS DIAMETER, IN., IN. 77408218 4 @ 20 O.455" O.D. 1.368" OVERALL 77408219 3 @ 30 O.455" O.D. 1.368" OVERALL 77408220 3 @ 45 O.455" O.D. 1.368" OVERALL 77408221 2 @ 45 O.455" O.D. 1.368" OVERALL 77408222 2 @ 20 O.455" O.D. 1.368" OVERALL 77408225 4 @ 30 O.650" O.D. 1.460" OVERALL 77408226 2 @ 30 O.650" O.D. 1.460" OVERALL 77408227 6 @ 10 O /15 O /25 O.650" O.D. 1.460" OVERALL MALE 9/16"-18 RH BUTTON END REQUIRES BRASS BUTTON #77408001 Requires Sapphire Inserts (See Page 30 for Selection) See Sapphire Flow Chart on Page 6. PART NO. # JETS DIAMETER, IN., IN. 77408240 4 @ 20 O 1" HEX, 1.155" MAX O.D. 2.455" OVERALL 28
40K TUBE CLEANING WITH SAPPHIRE INSERTS FEMALE 5/16"-24 RH (NG-UHP) Requires Sapphire Inserts (See Page 30 for Selection) See Sapphire Flow Chart on Page 6. PART NO. # JETS DIAMETER, IN., IN. 77408260 3 @ 8 O.417" O.D. 2.345" OVERALL 77408261 3 @ 20 O.468" O.D. 1.867" OVERALL 77408263 3 @ 30 O.468" O.D. 1.810" OVERALL 40K FEMALE 3/8"-24 RH (NG-UHP) Requires Sapphire Inserts (See Page 30 for Selection) See Sapphire Flow Chart on Page 6. PART NO. # JETS DIAMETER, IN., IN. 77408200 2 @ 10 O.495" O.D. 1.795" OVERALL 77408201 2 @ 20 O.495" O.D. 1.795" OVERALL 77408202 2 @ 30 O.495" O.D. 1.795" OVERALL 77408203 2 @ 45 O.495" O.D. 1.795" OVERALL 77408212 3 @ 45 O.495" O.D. 1.795" OVERALL 77408205 3 @ 30 O.495" O.D. 1.795" OVERALL 77408207 3 @ 50 O.587" O.D. 2.05" OVERALL 29
40K SAPPHIRE INSERT ASSEMBLIES HEX PLUG ASSY: PART #77408162H SLOTTED JEWEL SCREW M4 x.05 PART #77408023 JEWEL SCREW M4 x.05 PART #77408023 PART #77408144 SLOTTED PLUG ASSY. PART #77408024S SLOTTED SCREW PART #77408023 SLEEVE PART #77408163 HEX STYLE PLUG PART #77408144 SLOTTED PLUG PART #77408024 SAPPHIRE 40K SIZE SAPPHIRE ORIFICE PART NO. SLOTTED JEWEL ASSEMBLY PART NO. HEX JEWEL ASSEMBLY PART NO. 0.002 77408110-002 77408110-002S 77408110-002H 0.003 77408110-003 77408110-003S 77408110-003H 0.004 77408110-004 77408110-004S 77408110-004H 0.005 77408110-005 77408110-005S 77408110-005H 0.006 77408110-006 77408110-006S 77408110-006H 0.007 77408110-007 77408110-007S 77408110-007H 0.008 77408110-008 77408110-008S 77408110-008H 0.009 77408110-009 77408110-009S 77408110-009H 0.010 77408110-010 77408110-010S 77408110-010H 0.011 77408110-011 77408110-011S 77408110-011H 0.012 77408110-012 77408110-012S 77408110-012H 0.013 77408110-013 77408110-013S 77408110-013H 0.014 77408110-014 77408110-014S 77408110-014H 0.015 77408110-015 77408110-015S 77408110-015H 0.016 77408110-016 77408110-016S 77408110-016H 0.017 77408110-017 77408110-017S 77408110-017H 0.018 77408110-018 77408110-018S 77408110-018H 0.019 77408110-019 77408110-019S 77408110-019H 0.020 77408110-020 77408110-020S 77408110-020H 0.021 77408110-021 77408110-021S 77408110-021H 0.022 77408110-022 77408110-022S 77408110-022H 0.023 77408110-023 77408110-023S 77408110-023H 0.024 77408110-024 77408110-024S 77408110-024H 0.025 77408110-025 77408110-025S 77408110-025H 0.026 77408110-026 77408110-026S 77408110-026H 0.027 77408110-027 77408110-027S 77408110-027H 0.028 77408110-028 77408110-028S 77408110-028H 0.029 77408110-029 77408110-029S 77408110-029H 0.030 77408110-030 77408110-030S 77408110-030H 0.031 77408110-031 77408110-031S 77408110-031H 0.032 77408110-032 77408110-032S 77408110-032H 0.033 77408110-033 77408110-033S 77408110-033H 0.034 77408110-034 77408110-034S 77408110-034H 0.035 77408110-035 77408110-035S 77408110-035H 0.036 77408110-036 77408110-036S 77408110-036H 0.037 77408110-037 77408110-037S 77408110-037H 0.038 77408110-038 77408110-038S 77408110-038H 0.039 77408110-039 77408110-039S 77408110-039H 0.042 77408110-042 77408110-042S 77408110-042H 0.052 77408110-052 77408110-052S 77408110-052H 30
40K HIGH PRODUCTION VIPER TM SERIES HEADS #77408185-LM Material: 15-5 Stainless Steel Dimensions: 4.5 Inches Long, 1.99 Inches Diameter 40,000 PSI (2758 Bar) MAWP Specify fl ow rate and pressure for nozzle confi guration. Refer to Sapphire Chart on Page 6. Consult sales for proper jets. 40K ORIFICE ASSEMBLIES & JEWELS FOR VIPERS PATENTED HIGH-COHESIVE ORIFICE ASSEMBLIES 40K JET SIZE PART NO. JET SIZE PART NO. JET SIZE PART NO. JET SIZE PART NO. 0.005 77408182-005 0.014 77408182-014 0.023 77408182-023 0.034 77408182-034 0.006 77408182-006 0.015 77408182-015 0.024 77408182-024 0.035 77408182-035 0.007 77408182-007 0.016 77408182-016 0.025 77408182-025 0.036 77408182-036 0.008 77408182-008 0.017 77408182-017 0.026 77408182-026 0.038 77408182-038 0.009 77408182-009 0.018 77408182-018 0.027 77408182-027 0.039 77408182-039 0.010 77408182-010 0.019 77408182-019 0.028 77408182-028 0.043 77408182-043 0.011 77408182-011 0.020 77408182-020 0.030 77408182-030 0.049 77408182-049 0.012 77408182-012 0.021 77408182-021 0.031 77408182-031 0.052 77408182-052 0.013 77408182-013 0.022 77408182-022 0.032 77408182-032 PLUG 77408182-P SAPPHIRE ORIFICE ASSEMBLIES Refer to Sapphire Chart on Page 6. SAPPHIRE ORIFICE ASSY. VIPER NOZZLE JEWEL SCREW #77408199 3/8-24 R.H. JET SIZE PART NO. JET SIZE PART NO. JET SIZE PART NO. JET SIZE PART NO. 0.006 77408191-006 0.019 77408191-019 0.032 77408191-032 0.043 77408191-043 0.007 77408191-007 0.020 77408191-020 0.033 77408191-033 0.044 77408191-044 0.008 77408191-008 0.022 77408191-022 0.034 77408191-034 0.045 77408191-045 0.010 77408191-010 0.024 77408191-024 0.035 77408191-035 0.047 77408191-047 0.011 77408191-011 0.025 77408191-025 0.036 77408191-036 0.048 77408191-048 0.012 77408191-012 0.026 77408191-026 0.037 77408191-037 0.052 77408191-052 0.013 77408191-013 0.027 77408191-027 0.038 77408191-038 0.055 77408191-055 0.014 77408191-014 0.028 77408191-028 0.039 77408191-039 0.015 77408191-015 0.029 77408191-029 0.040 77408191-040 0.016 77408191-016 0.030 77408191-030 0.041 77408191-041 0.018 77408191-018 0.031 77408191-031 0.042 77408191-042 PLUG 77408191-P 31
1/4 MEG. HARD HITTERS - MALE NPT HARD HITTERS 1/4" MEG. HARD HITTER (MALE NPT) See Flow Chart on Pages 2 and 3. Applications/Features: These nozzles are designed for use with Gardner Denver 10,000/15,000 PSI Hand Held Control Guns for bringing exceptional cutting and cleaning power to external surfaces. They are machined from stainless steel and hardened for longer service life. The design of these nozzles includes wrench fl ats for ease of installation on the gun. An internal guide vane stabilizes turbulence to provide maximum spray impact. Maximum allowable working pressure = 15,000 PSI (1034 Bar). GUN BARREL STYLE HARD HITTER (MALE NPT) See Flow Chart on Pages 2 and 3. JET SIZE Applications/Features: These nozzles are designed for use with Gardner Denver 10,000/15,000 PSI Hand Held Control Guns for bringing exceptional cutting and cleaning power to external surfaces. They are machined from stainless steel and hardened for longer service life. The design of these nozzles includes wrench fl ats for ease of installation on the gun. Maximum allowable working pressure = 15,000 PSI (1034 Bar). JET SIZE PART NO. JET SIZE PART NO. #2 0.036 77112054 #11 0.078 77112070 #3 0.043 77112055 #12 0.082 77112072 #4 0.047 77112056 #12.5 0.084 77112073 #4.5 0.050 77112057 #13 0.085 77112074 #5 0.052 77112058 #15 0.093 77112076 #5.5 0.055 77112059 #16 0.095 77112077 #6 0.059 77112060 #18 0.100 77112078 #6.5 0.060 77112061 #20 0.106 77112079 #7 0.062 77112062 #25 0.118 77112080 #7.5 0.065 77112063 #30 0.130 77112082 #8 0.067 77112064 #35 0.140 77112083 #8.5 0.069 77112065 #40 0.156 77112084 #9 0.071 77112066 #50 0.167 77112085 #9.5 0.073 77112067 #60 0.187 77112095 #10 0.075 77112068 JET SIZE PART NO. JET SIZE PART NO. #021 0.021 77111002 #10 0.075 77111020 #024 0.024 77111003 #10.5 0.077 77111021 #026 0.026 77111004 #11 0.078 77111022 #031 0.031 77111005 #11.5 0.080 77111023 #2 0.036 77111006 #12 0.082 77111024 #3 0.043 77111007 #12.5 0.084 77111025 #4 0.047 77111008 #13 0.085 77111026 #4.5 0.050 77111009 #14 0.089 77111027 #5 0.052 77111010 #15 0.093 77111028 #5.5 0.055 77111011 #16 0.095 77111029 #6 0.059 77111012 #18 0.100 77111030 #6.5 0.060 77111013 #20 0.106 77111031 #7 0.062 77111014 #25 0.118 77111032 #7.5 0.065 77111015 #27 0.125 77111033 #8 0.067 77111016 #30 0.130 77111034 #8.5 0.069 77111017 #35 0.140 77111035 #9 0.071 77111018 #40 0.156 77111036 #9.5 0.073 77111019 #50 0.167 77111037 32
TUNGSTEN CARBIDE HEX & SLIMLINE MALE NPT JET SIZE PART NO. JET SIZE PART NO. #026 0.026 77114004 #10 0.075 77114020 #031 0.031 77114005 #10.5 0.077 77114021 #1.4 0.028 77115063 #11 0.078 77114022 #1.8 0.034 77115064 #11.5 0.080 77114023 #2 0.036 77114006 #12 0.082 77114024 #2.5 0.039 77115062 #12.5 0.084 77114026 #3 0.043 77114007 #13 0.085 77114027 #4 0.047 77114008 #14 0.089 77114028 #4.5 0.050 77114009 #15 0.093 77114029 #5 0.052 77114010 #16 0.095 77114030 #5.5 0.055 77114011 #18 0.100 77114031 #6 0.059 77114012 #20 0.106 77115061 #6.5 0.060 77114013 #25 0.118 77114032 #7 0.062 77114014 #27 0.125 77114033 #7.5 0.065 77114015 #30 0.130 77114034 #8 0.067 77114016 #35 0.140 77114035 #8.5 0.069 77114017 #40 0.156 77114036 #9 0.071 77114018 #50 0.167 77114037 #9.5 0.073 77114019 JET SIZE PART NO. JET SIZE PART NO. #021 0.021 77115002 #10 0.075 77115020 #024 0.024 77115003 #10.5 0.077 77115021 #026 0.026 77115004 #11 0.078 77115022 #031 0.031 77115005 #11.5 0.080 77115023 #2 0.036 77115006 #12 0.082 77115024 #2.5 0.039 77115062 #13 0.085 77115026 #3 0.043 77115007 #14 0.089 77115027 #4 0.047 77115008 #15 0.093 77115028 #4.5 0.050 77115009 #16 0.095 77115029 #5 0.052 77115010 #18 0.100 77115030 #5.5 0.055 77115011 #20 0.106 77115031 #6 0.059 77115012 #21 0.109 77115061 #6.5 0.060 77115013 #25 0.118 77115032 #7 0.062 77115014 #27 0.125 77115033 #7.5 0.065 77115015 #30 0.130 77115034 #8 0.067 77115016 #35 0.140 77115035 #8.5 0.069 77115017 #40 0.156 77115036 #9 0.071 77115018 #50 0.165 77115037 #9.5 0.073 77115019 TUNGSTEN CARBIDE HARD HITTER (SLIMLINE MNPT) See Flow Chart on Pages 4 and 5. Applications/Features: These nozzles are designed for use with Gardner Denver 10,000/15,000 PSI Hand Held Control Guns for bringing exceptional cutting and cleaning power to external surfaces. The Slimline Style can also be used with pineapple type sewer cleaning nozzles. Both of these nozzles are stainless steel with tungsten carbide orifi ce inserts and straightening vanes. The Tungsten Carbide Hex MNPT hard Hitter (below) includes a special fl ow straightener. The Slimline Style has wrench fl ats for ease of installation on the gun. Maximum allowable working pressure = 15,000 PSI (1034 Bar). TUNGSTEN CARBIDE HARD HITTER (HEX. MNPT) See Flow Chart on Pages 8 and 9. TUNGSTEN CARBIDE ORIFICE INSERT VANE HARD HITTERS 33
LARGE TUNGSTEN CARBIDE HARD HITTERS HARD HITTERS 3/4" NPT TUNGSTEN CARBIDE NOZZLE ASSEMBLY (MNPT) See Flow Chart on Pages 4 and 5. The LARGE TUNGSTEN CARBIDE SOLID STREAM NOZZLES are designed for special high flow applications in surface cleaning. they are rated for pressures up to 10,000 PSI. FLOW RATES ORIFICE SIZE THREAD SIZE Applications/Features: COMPLETE ASSY. PART NO. CARBIDE INSERT ONLY PART NO. 0.094 3/4" NPT 77115060 77115059 0.109 3/4" NPT 77115044 77115038 0.125 3/4" NPT 77115050 77115051 0.140 3/4" NPT 77115047 77115065 0.156 3/4" NPT 77115045 77115039 0.165 3/4" NPT 77115052 77115054 0.172 3/4" NPT 77115053 77115055 0.187 3/4" NPT 77115046 77115040 0.203 3/4" NPT 77115058 77115041 0.218 3/4" NPT 77115048 77115056 0.250 3/4" NPT 77115049 77115042 0.312 3/4" NPT 77115057 77115043 These Hi-Flow Tungsten Carbide Nozzles are designed for use with high horsepower pumping units fi nding use in paper mills, power plants, reactor vessels, tube bundle cleaners and tank cleaners. The Nozzle Holders are machined from stainless steel for durability and can be used many times over by replacing the insert. The fi eld replaceable carbide insert can be installed in just a few minutes. This exclusive quick change feature is found only on Gardner Denver Water Jetting Systems Hi-Flow Carbide Nozzles. Maximum allowable working pressure = 10,000 PSI (689 Bar). ORIFICE 2 KPSI 4 KPSI 6 KPSI 8 KPSI 10 KPSI 12 KPSI 14 KPSI 16 KPSI 18 KPSI 20 KPSI 0.094 11 16 19 22 25 27 30 32 34 35 0.109 15 21 26 29 33 36 39 42 44 47 0.125 19 27 34 39 43 47 51 55 58 61 0.140 24 34 42 49 54 60 64 69 73 77 0.156 30 43 52 60 67 74 80 85 90 95 0.165 34 48 58 68 75 83 89 95 101 107 0.172 38 54 66 76 85 93 101 108 114 121 0.187 43 61 75 87 97 106 115 123 130 137 0.203 51 72 88 102 114 125 135 144 153 161 0.218 59 83 102 118 132 144 156 167 177 186 0.250 77 110 134 155 173 190 205 219 232 245 0.312 121 171 209 241 270 295 319 341 362 381 34
15 O, 25 O & 40 O STANDARD FAN TIP NOZZLES 15 O FAN TIP NOZZLES (MNPT) See Flow Chart on Pages 2 and 3. Applications/Features: These nozzles are designed primarily for use with Gardner Denver 10,000/15,000 PSI Hand Held Control Guns for general surface cleaning applications. They are available in 15 O, 25 O and 40 O fan angles. Both of these nozzles are machined from stainless steel. Maximum allowable working pressure = 15,000 PSI (1034 Bar). JET SIZE PART NO. JET SIZE PART NO. #1 0.026 77116000 #10 0.075 77116016 #1.5 0.031 77116001 #10.5 0.077 77116017 #2 0.036 77116002 #11 0.078 77116018 #3 0.043 77116003 #12 0.082 77116020 #3.5 0.045 77116049 #12.5 0.084 77116021 #4 0.047 77116004 #13 0.085 77116022 #4.5 0.050 77116005 #14 0.089 77116023 #5 0.052 77116006 #15 0.093 77116024 #5.5 0.055 77116007 #16 0.095 77116025 #6 0.059 77116008 #18 0.100 77116026 #6.5 0.060 77116009 #20 0.106 77116027 #7 0.062 77116010 #25 0.118 77116028 #7.5 0.065 77116011 #30 0.130 77116030 #8 0.067 77116012 #35 0.140 77116029 #8.5 0.069 77116013 #40 0.156 77116032 #9 0.071 77116014 #50 0.167 77116033 FAN TIPS 40 O FAN TIP NOZZLES (MNPT) See Flow Chart on Pages 2 and 3. JET SIZE PART NO. #2 0.036 77116060 #4 0.047 77116065 #5 0.052 77116066 #6 0.059 77116068 #7 0.062 77116070 #10 0.075 77116057 #15 0.093 77116058 #20 0.106 77116059 25 O FAN TIP NOZZLES (MNPT) See Flow Chart on Pages 2 and 3. JET SIZE PART NO. JET SIZE PART NO. #1 0.026 77116069 #8 0.067 77116044 #2 0.036 77116034 #8.5 0.069 77116045 #3 0.043 77116035 #9 0.071 77116046 #4 0.047 77116036 #9.5 0.073 77116047 #4.5 0.050 77116037 #10 0.075 77116048 #5 0.052 77116038 #11 0.078 77116050 #5.5 0.055 77116039 #12 0.082 77116052 #6 0.059 77116040 #13 0.085 77116054 #6.5 0.060 77116041 #14 0.089 77116055 #7 0.062 77116042 #15 0.093 77116056 #7.5 0.065 77116043 #50 0.167 77116031 35
15 O & 25 O TUNGSTEN CARBIDE FAN TIPS 15 O TUNGSTEN CARBIDE FAN TIP NOZZLES (MNPT) See Flow Chart on Pages 4 and 5. JET SIZE PART NO. JET SIZE PART NO. #1 0.031 77117030 #7 0.062 77117041 #2 0.036 77117033 #8 0.067 77117043 #3 0.043 77117034 #9 0.071 77117045 #4 0.047 77117035 #10 0.075 77117047 #5 0.052 77117037 #12 0.082 77117051 #5.5 0.055 77117038 #15 0.093 77117055 #6 0.059 77117039 FAN TIPS Applications/Features: These nozzles are designed for use with Gardner Denver 10,000/15,000 PSI Hand Held Control Guns for general surface cleaning applications. They are available in 15 O and 25 O fan angles from stock and other fan angles can be ordered. Both of these nozzles are stainless steel with tungsten carbide orifi ce inserts. Maximum allowable working pressure = 15,000 PSI (1034 Bar). 25 O TUNGSTEN CARBIDE FAN TIP NOZZLES (MNPT) See Flow Chart on Pages 4 and 5. JET SIZE PART NO. JET SIZE PART NO. #2 0.036 77117002 #7 0.062 77117010 #3 0.043 77117003 #8 0.067 77117012 #4 0.047 77117004 #9 0.071 77117014 #4.5 0.050 77117005 #10 0.075 77117016 #5 0.052 77117006 #13 0.085 77117022 #6 0.059 77117008 #15 0.093 77117024 36
ULTRA-POLISHED I.D. STRAIGHT JET NOZZLES Applications/Features: These nozzles are designed primarily for use with the Jetting Systems brand Shellside Cleaners, yet they have use in a wide range of applications. The Ultra Straight Jet 1/2" Female NPT and Ultra Straight Jet 1/2" Male NPT nozzle holders, with straight jet nozzles with carbide inserts. Orifi ces of the nozzles range from 0.062" to 0.172". Orifi ces of the Ultra Polished ID Jet Straight Carbide Inserts range from 0.062" to 0.172". Our knowledgeable sales staff will be happy to recommend the ideal nozzle assembly for your application. Each of these nozzles is made to screw onto the arm assembly with a little Tefl on TM Tape. Maximum allowable working pressure = 15,000 PSI (1034 Bar). ULTRA STRAIGHT JET 1/2" FEMALE NPT ORIFICE PART NO. Close-up of the articulated arm of the Arm-Type Shellside Cleaner showing rotary nozzle assembly. HOLDER 66SNP8FXXX 0.062 66SNP8F062 0.078 66SNP8F078 0.089 66SNP8F089 0.109 66SNP8F109 0.125 66SNP8F125 0.140 66SNP8F140 0.156 66SNP8F156 0.166 66SNP8F166 0.172 66SNP8F172 CARBIDE INSERTS ORIFICE PART NO. 0.062 66CNP06203 0.078 66CNP07803 0.089 66CNP08903 0.109 66CNP10903 0.125 66CNP12503 0.140 66CNP14003 0.156 66CNP15603 0.166 66CNP16603 0.172 66CNP17203 0.203 66CNP20307 1.25" 4.50" 4.50" 1.25" ULTRA STRAIGHT JET 1/2" MALE NPT CARBIDE INSERT REQUIRED FOR THESE ULTRA STRAIGHT JET NOZZLES ORIFICE PART NO. HOLDER 66SNP8MXXX 0.062 66SNP8M062 0.078 66SNP8M078 0.089 66SNP8M089 0.109 66SNP8M109 0.125 66SNP8M125 0.140 66SNP8M140 0.156 66SNP8M156 0.166 66SNP8M166 0.172 66SNP8M172 SURFACE CLEANING 37
20K SURFACE CLEANING NOZZLES 20K TUNGSTEN CARBIDE QUICK CHANGE NOZZLE BODY See Flow Chart on Pages 4 and 5. CAP #77600043 O-RING #2209212 BODY #77600044-1 ASSEMBLY #77600044 9/16" MEDIUM PRESSURE CONNECTION QUICK CHANGE TUNGSTEN CARBIDE NOZZLE 20K TUNGSTEN CARBIDE SURFACE CLEANING NOZZLE INSERTS SURFACE CLEANING ORIFICE PART NO. ORIFICE PART NO. 0.021 77133001 0.043 77133012 0.022 77133002 0.047 77133013 0.024 77133003 0.051 77133014 0.026 77133005 0.052 77133015 0.028 77133006 0.054 77133017 0.029 77133007 0.055 77133016 0.031 77133008 0.059 77133021 0.032 77133009 0.062 77133018 0.036 77133010 0.071 77133024 0.037 77133004 0.076 77133026 0.041 77133011 20K TUNGSTEN CARBIDE HIGH IMPACT FAN JET INSERTS ORIFICE PART NO. ORIFICE PART NO. 0.021 77133050 0.041 77133060 0.022 77133051 0.043 77133061 0.023 77133076 0.047 77133062 0.024 77133052 0.050 77133063 0.026 77133054 0.052 77133064 0.028 77133055 0.055 77133065 0.031 77133057 0.057 77133066 0.032 77133058 0.059 77133067 0.036 77133059 0.075 77133075 PART #77133004 PART #77133006 38
BARRACUDA 10/20-40K ROTARY NOZZLES No air required Rotation speed control 2 or 4 jet confi guration Easy fi eld maintenance Replaceable nozzle tips Less than 3 Lbs. full weight Less maintenance than air-powered tools NPT Adapters 3/8" & 1/2" Applications/Features: The Barracuda sets the industry standard for speed controlled rotary shotgun tools. Barracudas are available in 15K, 20K and 40K PSI models. These lightweight tools adapt to any high pressure pump and are simple to maintain. The Barracuda is excellent for diffi cult and irregular surfaces where a hand-held operator can more effi ciently maneuver the cleaning head. Our leak-free seak design combined with centrifugal speed control delivers more power to the surface for superior results. We recommend 4-port heads for larger surface areas and 2-port heads for removal of thick deposits. Barracuda self-rotary tools eliminate the need for expensive and complicated compressed air. The BC-H9-C and BC-H9LF-C can handle pressures from 28K - 40K PSI. Both of these models feature 4 jets with speed control rotation. The BC-H9-C is for 4-8 GPM, and the BC-H9LF-C is for 3-4 GPM. 20K & 40K BARRACUDA SPECS MODEL PRESSURE FLOW DIAMETER INLET JETS 77STBC-K 77STBC-K-P2 77STBC-H9-C 77STBC-H9LF-C 10/20K PSI JETTING CHART PRESSURE IN KPSI 20K PSI 15 GPM 7.8 In. 1.8 In. 9/16" MP 2 1400 Bar 57 LPM 200 mm 46 mm AP4 & AP2 NOZZLE I.D. - INCHES.018.020.022.024.026.029.032.035.038.042.047 10 5.5 6.5 7.6 9.2 11.4 Jetting Flow 15 4.4 5.5 6.7 8.0 9.4 20 4.4 5.1 6.4 7.7 20K PSI 15 GPM 7.8 In. 1.8 In. 9/16" MP 4 1400 Bar 57 LPM 200 mm 46 mm 40K PSI 8 GPM 7.8 In. 1.8 In. 9/16" HP 4 2800 Bar 30 LPM 200 mm 46 mm 40K PSI 4 GPM 7.8 In. 1.8 In. 9/16" HP 4 2800 Bar 15 LPM 200 mm 46 mm 77STBC-K-AP4 2 Jets 1/4" NPT Ports in GPM 10 5.2 6.1 7.2 8.8 10.6 Jetting Flow 15 4.3 5.2 6.3 7.5 8.8 20 4.9 6.1 7.3 77STBC-K-P2AP4 4 Jets 1/8" NPT Ports in GPM SURFACE CLEANING 40K PSI JETTING CHART PRESSURE IN KPSI OS7 NOZZLE I.D. - INCHES.014.015.016.017.018.019.020.021.022.023 32 3.1 3.5 4.5 5.0 5.6 6.1 6.7 7.4 36 2.9 3.3 3.8 4.8 5.3 5.9 6.5 7.1 40 3.0 3.5 5.6 6.2 6.9 BC-H9LF-C Flow - GPM BC-H9-C Jetting Flow - GPM 39
SALO-JET ORBITAL JET NOZZLES HIGH PERFORMANCE ORBITAL JET NOZZLES Pressures from 10,000-36,000 PSI Combines the power of a solid jet with the coverage of a fan jet. Easy maintenance, simple field overhaul Increased productivity Light weight, simple to operate Applications/Features: Gardner Denver Water Jetting Systems proudly offers the Salo-Jet Orbital Jet Nozzle for waterjet cleaning and surface preparation applications. SURFACE CLEANING Inlet Body Rotor Seat The Salo-Jet s jets are directed at a 20 O angle for broad coverage to increase the production rate over many standard blast nozzles on the market. It effectively combines rotation plus the power of a solid jet and the coverage area of a fan jet. The Salo-Jet is quickly fi eld overhauled by changing its rotor and seat. Each Salo-Jet is shipped fuly tested and certifi ed in its own case. Ideal for use in: Concrete cleaning and hydrodemolition Casting cleaning Scale removal Surface preparation Offshore cleaning ITEM MAWP INLET DIMENSIONS WEIGHT PART NO. SALO-JET 800 SALO-JET 1500 SALO-JET 2500 10 KPSI 800 Bar 20 KPSI 1500 Bar 36 KPSI 2500 Bar 3/8" or 1/2" NPT 1-3/4" x 5-1/8" 43 x 130 mm 9/16" MP 2" x 5-1/4" 50 x 134 mm 9/16" HP 2" x 5-1/4" 50 x 134 mm Note: Must specify Flow and Pressure when ordering. 1.5 Lbs. 0.7 Kg 2.6 Lbs. 1.2 Kg 2.6 Lbs. 1.2 Kg 77SAF238NF 3/8" 77SAF312NF 1/2" 77SAF916MPLH 77SAF25HPLH 40
SALO-JET ORBITAL JET NOZZLES How to Order the Salo-Jet Nozzle: You must specify fl ow and pressure from the chart below. The rotors and seat assemblies are specific to each flow and pressure rating. ORIFICE PRESSURE IN PSI DIAM. 10K 12K 14K 16K 18K 20K 22K 24K 26K 28K 30K 32K 34K 36K 0.026 3.01 3.11 3.20 3.30 0.028 3.49 3.60 3.72 3.82 0.030 4.01 4.14 4.27 4.39 0.031 4.24 4.40 4.56 4.71 4.85 4.99 0.033 4.79 4.97 5.15 5.32 5.48 5.64 0.035 4.71 4.94 5.16 5.37 5.57 5.77 5.96 6.14 6.32 0.037 5.25 5.51 5.75 5.98 6.21 6.43 6.64 6.84 7.04 0.039 4.11 4.51 4.87 5.20 5.52 5.82 6.10 6.37 6.63 6.88 7.12 7.36 7.58 7.80 0.041 4.53 4.97 5.36 5.74 6.08 6.41 6.73 7.02 7.31 7.59 7.85 8.11 8.36 8.60 0.043 4.98 5.45 5.89 6.29 6.68 7.04 7.38 7.71 8.02 8.33 8.62 8.90 9.18 9.44 0.045 5.44 5.96 6.44 6.88 7.30 7.69 8.07 8.43 8.77 9.10 9.42 9.73 10.03 10.32 0.047 5.92 6.49 7.01 7.49 7.95 8.37 8.78 9.17 9.55 9.91 10.26 10.59 10.92 0.049 6.43 7.04 7.60 8.13 8.62 9.09 9.53 9.95 10.36 10.75 11.13 11.49 0.051 6.95 7.61 8.22 8.79 9.32 9.83 10.31 10.77 11.21 11.63 0.053 7.50 8.21 8.87 9.48 10.06 10.60 11.12 11.61 0.055 8.06 8.83 9.54 10.20 10.81 0.057 8.65 9.47 10.23 10.94 0.059 9.25 10.14 10.95 0.061 9.88 10.82 0.063 10.53 SURFACE CLEANING Repair Kit: Consists of Rotor and Seat Rotor Seat Repair Kit: Part #77SAF123/XXXX - Specify Flow and Pressure 41
10-20K TUBE SPINNING NOZZLES 45 o Back 90 o Spinning Nozzle Technology for Superior Tube Cleaning The patented spiral grooves in the sleeve creates a powerful 360 O cleaning pattern. You can select from three (3) spinning sleeve combinations to take care of all your tough cleaning problems. Puller Polisher Puller- Polisher 4 @ 45 o Back 4 @ Radial 2 @ Radial 2 @ 45 o Back NPT for 15,000 PSI / 1034 Bar NOZZLE ASSEMBLY PULLER POLISHER PULLER- POLISHER 1/16" NPT (.390" Diam.) 77SA6010.0116 77SA6010.4116 77SA6010.2116 1/8" NPT (.470" Diam.) 776312 776312.4 776312.2 1/4" NPT (.710" Diam.) 776318 776318.4 776318.2 LINE MOLES MP for 20,000 PSI / 1279 Bar NOZZLE ASSEMBLY PULLER POLISHER PULLER- POLISHER 1/4" MP (.390" Diam.) - - 77SA6010.2114ML 3/8" MP (.470" Diam.) 776312.20 776312.420 776312.220 9/16" MP (.710" Diam.) 776318.20 776318.420 776318.220 Front Nozzle Drilling Configurations: Specify When Ordering NOTE: Front nozzle orifi ce confi guration is based on total fl ow and pressure for the nozzle. Front Nozzle 45 o Back 45 o Back 90 o 45 o Forward 0 o Forward 45 o Forward 42
PINEAPPLE-TYPE LINE MOLE NOZZLES APLM #77118001 BPLM 1/2" NPT #77118002-1 BPLM 9/16" MP #77118200 20 KPSI BPLM 3/4" NPT #77118002 CPLM #77118003 DPLM #77118004 EPLM #77118005 MOLE TYPE DIRECTION OF PORTS APLM 1 FRNT (3/4 FNPT), 3 FWD (45 O ), 8 BACK (15 O ), 8 BACK (45 O ) APLM RADIAL BPLM RADIAL BPLM 1/2" NPT *BPLM 9/16" MP BPLM RADIAL BPLM 3/4" NPT 1 FRONT, 3 FORWARD (45 O ), 8 SIDE (90 O ), 8 BACK (45 O ) 1 FRONT, 3 FORWARD (45 O ), 6 SIDE (90 O ), 6 BACK (45 O ) FRONT, 3 FORWARD (45 O ), 6 BACK (15 O ), 6 BACK (45 O ) 1 FRONT, 3 FORWARD (45 O ), 6 BACK (15 O ), 6 BACK (45 O ) 1 FRONT, 3 FORWARD (45 O ), 6 SIDE (90 O ), 6 BACK (45 O ) 1 FRONT, 3 FORWARD (45 O ), 6 BACK (15 O ), 6 BACK (45 O ) x DIAMETER INLET x PORT DIA. PART NO. 3-3/4" x 3" DIA. 1" NPT x 1/4" NPT 77118001 3-3/4" x 3" DIA. 1" NPT x 1/4" NPT 77118001-1 3-1/2" x 2-1/4" DIA. 3/4" NPT x 1/4" NPT 77118002-SP 3-1/2" x 2-1/4" DIA. 1/2" NPT x 1/4" NPT 77118002-1 3-1/2" x 2-1/4" DIA. 9/16" MP x 1/4" NPT 77118200 20 KPSI 3-1/2" x 2-1/4" DIA. 1/2" NPT x 1/4" NPT 77118002-1SP 3-1/2" x 2-1/4" DIA. 3/4" NPT x 1/4" NPT 77118002 CPLM 1 FRONT, 3 BACK (45 O ) 2-1/2" x 1-5/8" DIA. 1/2" NPT x 1/4" NPT 77118003 DPLM 1 FRONT, 3 FORWARD (45 O ), 6 BACK (15 O ), 6 BACK (45 O ) EPLM 1 FRONT, 3 FORWARD (45 O ), 6 BACK (45 O ) See Line Mole Inserts pages 44 & 45. 3-1/2" x 1-5/8" DIA. 3/4" NPT x 1/8" NPT 77118004 2-3/4" x 1-1/8" DIA. 1/2" NPT x 1/16" NPT 77118005 LINE MOLES 43
LINE MOLE NOZZLE INSERTS STAINLESS #77118015 TUNGSTEN #77118056 STAINLESS #77118055 STAINLESS #77118062 STAINLESS STEEL LINE MOLE JET INSERTS (1/4" NPT) See Flow Chart on Pages 2 and 3. SIZE PART NO. SIZE PART NO. SIZE PART NO. SIZE PART NO. PLUG 77118006 0.028 77118040 0.059 77118020 0.093 77118036 0.031 77118013 0.060 77118021 0.095 77118106 0.014 77118096 0.036 77118014 0.062 77118022 0.100 77118043 0.016 77118009 0.038 77118103 0.067 77118039 0.106 77118104 0.018 77118090 0.039 77118079 0.070 77118037 0.109 77118034 0.020 77118091 0.040 77118060 0.075 77118033 0.118 77118105 0.021 77118010 0.043 77118015 0.078 77118082 0.125 77118035 0.024 77118011 0.047 77118016 0.080 77118121 0.140 77118148 0.025 77118123 0.050 77118017 0.082 77118041 0.156 77118109 0.026 77118012 0.052 77118018 0.085 77118038 0.219 77118100 0.027 77118012 0.055 77118019 0.089 77118042 LINE MOLES TUNGSTEN CARBIDE LINE MOLE JET INSERTS (1/4" NPT) See Flow Chart on Pages 4 and 5. SIZE PART NO. SIZE PART NO. SIZE PART NO. PLUG 77118006 #5 0.052 77118026 #13 0.085 77118094 #021 0.021 77118048 #5.5 0.055 77118027 #14 0.089 77118093 #024 0.024 77118056 #6 0.059 77118095 #15 0.093 77118032 #026 0.026 77118098 #7 0.062 77118028 #18 0.100 77118108 #028 0.028 77118057 #7.5 0.065 77118099 #20 0.106 77118084 #1.5 0.031 77118023 #8 0.067 77118029 #21 0.109 77118046 #2 0.036 77118059 #8.5 0.069 77118107 #25 0.118 77118085 #2.2 0.037 77118097 #9 0.071 77118044 #27 0.125 77118047 #2.5 0.039 77118101 #9.5 0.073 77118045 #30 0.130 77118134 #3 0.043 77118058 #10 0.075 77118122 #35 0.140 77118074 #4 0.047 77118025 #11 0.078 77118092 #40 0.156 77118087 #4.5 0.050 77118073 #12 0.082 77118072 #50 0.167 77118083 44
LINE MOLE NOZZLE INSERTS STAINLESS #77118015 TUNGSTEN #77118056 STAINLESS #77118055 STAINLESS #77118062 STAINLESS STEEL LINE MOLE JET INSERTS (1/8" NPT) See Flow Chart on Pages 2 and 3. SIZE PART NO. SIZE PART NO. SIZE PART NO. PLUG 77118031 0.031 77118053 0.071 77118117 0.036 77118054 0.075 77118071 0.016 77118136 0.040 77118055 0.078 77118114 0.018 77118312 0.043 77118110 0.085 77118077 0.020 77118137 0.047 77118116 0.089 77118112 0.021 77118138 0.050 77118132 0.093 77118118 0.022 77118049 0.052 77118075 0.095 77118111 0.024 77118050 0.055 77118078 0.100 77118113 0.025 77118125 0.059 77118129 0.109 77118139 0.026 77118051 0.062 77118076 0.130 77118143 0.028 77118052 0.067 77118140 0.140 77118144 STAINLESS STEEL LINE MOLE JET INSERTS (1/16" NPT) See Flow Chart on Pages 2 and 3. LINE MOLES SIZE PART NO. SIZE PART NO. SIZE PART NO. PLUG 77118030 0.029 77118131 0.050 77118102 0.022 77118062 0.031 77118065 0.052 77118069 0.024 77118063 0.034 77118066 0.060 77118119 0.025 77118126 0.036 77118067 0.065 77118141 0.026 77118127 0.040 77118128 0.068 77118142 0.027 77118061 0.042 77118068 0.093 77118145 0.028 77118064 0.047 77118070 0.100 77118146 45
ABRASIVE JET CUTTING NOZZLES CUTTING 9/16" O.D. Tube Tube-Nozzle Adapter (FTNAH-60563-AE) Orifice Cone (FOC-610xx) Nozzle Body (FNB-600) Cutting Nozzle Holder (FSNH-83094) (FSNH-83125) FACNH-600 For Applications Up To 40,000 PSI 0 1/2" 1" SCALE: ONE INCH O-Ring Seal (FOS-600) Cutting Nozzle (FSN-83094) (FSN-83125) Abrasive Feed Tube (FFT-600) Set Screw (FSS-600) 9/16" O.D. Tube Tube-Nozzle Adapter (Various Types) Orifice Cone (FOC-610xx) Nozzle Body (FNB-600) Abrasive Entry Cone (FEC-60090) (FEC-60120) Locking Nut (FLN-600) 0 1/2" 1" SCALE: ONE INCH DESCRIPTION: This group of patented nozzles is designed for waterjet blasting applications in which selected additives are introduced to enhance the productivity. These additives could vary widely depending on the nature of the job. In most waterjetting applications, the additives are likely to be some kind of abrasives: they could be water soluble or insoluble, soft or hard, solid or liquid. These abrasive blasting nozzles are ideally suited for wet blasting with all types of additives. INTENDED USE: These products are designed primarily for abrasive waterjet cutting of a wide range of materials for various purposes. PRESSURE RATING: These nozzles are rated for use at water pressures up to 60,000 PSI but their actual working pressure will be determined by the pressure capability of other components such as tubes, hoses and adapters. FACNH-602 For Applications Up To 40,000 PSI O-Ring Seal (FOS-600) Nozzle Extension (FNE-600) TC Cutting Nozzle (FSN-33094) (FSN-33125) (FSN-36094) (FSN-36125) (FSN-36150) Abrasive Feed Tube (FFT-600) Set Screw (FSS-600) FLOW RATE: Suitable for use at less than 1.0 GPM to more than 10 GPM. AVAILABLE MODELS: There are currently two standard models to choose from: Type 600 and Type 602. The numerals indicate the type of cutting nozzle involved. FACNH-600 with 600-Series orifi ce cone rated for up to 40,000 PSI (2758 Bar). FACNH-602 with 600-Series orifi ce cone rated for up to 40,000 PSI (2758 Bar). TUBE-NOZZLE ADAPTER SIZES: This group of nozzles adapt to water supply tubes using three types of tube fi ttings: NPTF (National Pipe Threads Female) tube fi tting of 1/2" diameter for applications at water pressures below 15,000 PSI (1034 Bar). Medium Pressure (20,000 PSI or 1379 Bar) AE tube fi tting of 9/16" O.D. High Pressure (60,000 PSI or 4137 Bar) AF tube fi tting of 9/16" O.D. Adapters for other tube fi ttings are available on special order. ABRASIVE FEED TUBE: These abrasive blasting nozzles are fi tted with a replaceable feed tube for connecting the nozzle body to the plastic supply tube for the additives so as to protect the nozzle body. ABRASIVE HOSES: Gardner Denver Water Jetting Systems recommends the use of hard plastic hoses for transporting solid additives from a container to the nozzle. ABRASIVE FEED RATE: The optimum feed rate of additives to these nozzles is a function of several factors including the type of nozzle involved. The basic rule of thumb in determining the appropriate feed rate is to let the nozzle decide by itself. In other words, let the vacuum generated by the nozzle decide the amount of additives to be sucked into the nozzle, and provisions must be made to facilitate this process. There must not be any air leakage along the transport tube from the nozzle to the container, and the air is to be introduced only at the entrance of the plastic tube together with the additives. A suitable additive on-off valve with metering capability should be placed at this entrance. ASSY. PART # CONNECTION MAX FLOW, GPM STYLE FACNH-600 9/16" AF TUBE FITTING UP TO 10 GPM 1 PIECE CARBIDE FACNH-602 9/16" AF TUBE FITTING UP TO 10 GPM 2 PIECE CARBIDE 46
20K ABRASIVE INJECTOR NOZZLES FABNM-600 For 10,000 to 20,000 PSI Applications PRESSURE RATING: These nozzles are rated for use at water pressures up to 20,000 PSI (1379 Bar) but their actual working pressure will be determined by the pressure capability of other components such as tubes, hoses and adapters. FLOW RATE: Suitable for use at less than 1.0 GPM to more than 10 GPM. AVAILABLE MODELS: FABNM-600 with 600-Series orifi ce cone rated for up to 20,000 PSI (1379 Bar). TUBE-NOZZLE ADAPTER SIZES: This group of nozzles adapt to water supply tubes using two types of tube fi ttings: NPTF (National Pipe Threads Female) tube fi tting of 1/2 diameter for applications at water pressures below 15,000 PSI (1034 Bar). Medium Pressure (20,000 PSI or 1379 Bar) AE tube fi tting of 9/16 O.D. ABRASIVE FEED TUBE: These abrasive blasting nozzles are fi tted with a replaceable feed tube for connecting the nozzle body to the plastic supply tube for the additives so as to protect the nozzle body. ABRASIVE HOSES: Gardner Denver recommends the use of hard plastic hoses for transporting solid additives from a container to the nozzle. DESCRIPTION: This group of patented nozzles is designed for waterjet blasting applications in which selected additives are introduced to enhance the productivity. These additives could vary widely depending on the nature of the job. In most waterjetting applications, the additives are likely to be some kind of abrasives: they could be water soluble or insoluble, soft or hard, solid or liquid. These abrasive blasting nozzles are ideally suited for wet blasting with all types of additives. INTENDED USE: These products are designed primarily for abrasive waterjet cleaning, polishing, and blasting of a wide range of materials for various purposes such as the removal of paint, coating, rust and mill scales. ABRASIVE FEED RATE: The optimum feed rate of additives to these nozzles is a function of several factors including the type of nozzle involved. The basic rule of thumb in determining the appropriate feed rate is to let the nozzle decide by itself. In other words, let the vacuum generated by the nozzle decide the amount of additives to be sucked into the nozzle, and provisions must be made to facilitate this process. There must not be any air leakage along the transport tube from the nozzle to the container, and the air is to be introduced only at the entrance of the plastic tube together with the additives. A suitable additive on-off valve with metering capability should be placed at this entrance. CUTTING 47
ABRASIVE INJECTOR NOZZLES Applications/Features: This nozzle is designed for the ultimate in effi ciency and production for abrasive injection applications. The Inlet Adapter, Abrasive Injection Body and Nozzle Holder are made of stainless steel for corrosion resistance and durability. The Tungsten Carbide Nozzle Insert is designed to withstand the wearing action of the abrasive and water, and to maintain a good, even spray pattern. The interchangeable Blasting Nozzle is easily replaced to suit different pressure requirements and fl ow rates. This enables this Abrasive Injector Nozzle to be used with almost any water jetting unit. Refer to page 39 for the selection of the correct Blasting Nozzle. See Flow Chart on Pages 2 and 3. Maximum allowable working pressure = 10,000 PSI (689 Bar). CUTTING ITEM QUANTITY PART NO. ABRASIVE INJECTOR COMPLETE ASSY. COMPLETE 77510019A INLET ADAPTER 1 77510020 HOUSING FOR SAND EDUCTOR 1 77510021A SAND EDUCTOR T.C. NOZZLE (0.187 Standard) 1 77510015A O-RING 1 77510023 1/2" 45 O GALVANIZED ELBOW 1 77510025 48
SAFETY ACCESSORIES Assy. #77209001 Complete Guard Assy., Standard Assy. #77209036 Complete Guard Assy., Large FLEX LANCE SAFETY GUARD Applications/Features: The Gardner Denver Water Jetting Systems Flexible Lance Safety Guard reduces the danger from a live nozzle (i.e. pressurized) while it is being withdrawn from a tube sheet. This minimizes the risk of operator injury resulting from a live nozzle exiting a tube unexpectedly. The nozzle cannot be pulled out of the Flexible Lance Safety Guard thereby protecting the operator from high pressure spray. Three sizes of lance stop are provided with each complete assembly: 0.323", 0.442" and 0.510". ANTI-WITHDRAWAL DEVICE Applications/Features: The VE-70000 meets the safety requirements for tube and pipe cleaning operations. It offers tremendous versatility and a very durable design. It adapts easily to either vertical or horizontal applications, offers a wide range of expansion to accomodate different tube sheet sizes and is made of stainless steel with aluminum handles and a Lexan plate. ASSEMBLED WEIGHT MODEL VE-70000 APPLICABLE HOSE SIZES 22 LBS. / 10 Kg 4, 5, 6, 8, 13 MM Applications/Features: These devices are designed specifi cally to increase operator safety. They help prevent the nozzle from backing out of the pipe. Several options are available including jigs for small diameter pipes, for pipes with various fl ange bolt circle diameters, and adaptors for pipes with no fl ange entry. LINE MOLE BACKOUT PREVENTERS BJ-325 Extensions for 15" - 26" Pipes BJ-340 No-Flange Kit Handles hose O.D.s from 9/16" to 1-7/16" BJ-305 for 2" - 6" Pipes User is responsible for securing to pipe. Handles hose O.D.s from 3/8" to 9/16". BJ-310 for 4" - 8" Pipes Includes clamp for securing to pipe. Handles tool O.D.s of 1-1/2" diameters or larger. BJ-320 for 5" - 17" Pipes Handles hose O.D.s from 9/16" to 1-7/16" SAFETY 49
SAFETY INFORMATION INTRODUCTION Gardner Denver Water Jetting Systems is dedicated to serving the Water Blasting Industry with the highest quality equipment and replacement parts. These products have been carefully designed to safely deliver water at high pressure. Any equipment operating at high pressure can be hazardous if not used correctly by trained personnel. Great care must be taken during installation, operation and maintenance of all high pressure nozzles. Incorrect usage can cause serious bodily injury and even death. Before using any Gardner Denver product, it is strongly recommended that the operator reads and understands the Recommended Practices for the Use of Manually Operated High Pressure Water Blasting Equipment published by the U. S. Water Jet Technology Association (WJTA). A copy of this publication can be obtained from Gardner Denver Water Jetting Systems or directly from the WJTA. If any question arises regarding the use of any Gardner Denver Water Jetting Systems nozzles or any additional information is required, call us at 1-800-231-3628. NOZZLE SAFETY PROCEDURES 1. INSPECT NOZZLE prior to using to ensure that all orifi ces are unobstructed. Blocked orifi ces could result in dangerous over-pressurizing of pumping equipment. 2. DISCARD NOZZLE IF: (a) The nozzle shows any signs of cracking or damage, particularly to threaded connections. (b) The nozzle shows signifi cant wear to sidewall at any point. (c) The ability of the nozzle to hold pressure is at question. 3. USE TEFLON TM TAPE and PST TM Never-Seize or Tefl on TM based Never-Seize on all Male NPT threads before installing the nozzle. For those nozzles with machine screw threads use a good quality anti-seize compound. 4. USE WRENCH FLATS ON NOZZLES (if available) and an open ended wrench whenever possible, to install nozzles. A properly adjusted pipe wrench can be used for tightening nozzles which do not have wrench fl ats. Remember: DO NOT OVERTIGHTEN. Avoid deep wrench marks which can severely weaken the nozzle. 5. NOZZLE FLOW RATINGS must be compatible with pump fl ow and pressure rating to avoid dangerous over-pressurizing of the system. 6. NOZZLES THAT USE REPLACEMENT INSERTS (e.g. carbide, sapphire or steel) must be inspected for wear and damage before installing new inserts. Discard any nozzle which shows signs of deterioration. Use only Gardner Denver replacement inserts to ensure a correct fi t and reliable performance. SAFETY 50
CONDITIONS OF SALE & WARRANTY The description and specifi cations contained in this Quotation were in effect on the date of this Quotation. Gardner Denver, Inc. (hereinafter referred to as Seller) reserves the right to discontinue models or change specifi cations or design, including related items/equipment on the product or related engineered packaged system without notice and without incurring any obligation. General - Sellers prices are based on these sales terms and (i) this document, together with any additional writings signed by Seller, may not be modifi ed, supplemented, explained or waived by parol evidence. Buyer's Purchase Order, a course of dealing, or in any other way except in waiting signed by an authorized representative of Seller, and (ii) these terms are intended to cover all activity of Seller and Buyer hereunder, including sales and use of products and all related matters, including technical advice and services. Any references by Seller to Buyer specifi cations and similar requirements are only to describe the products covered hereby and no warranties or other terms therein shall have any force or effect. Catalogs, circulars and similar pamphlets of the Seller are issued for general information purposes only and shall not be deemed to modify the provisions hereof. (iii) This document is valid for thirty (30) days, subject to cancellation or change at any time prior to acceptance and acknowledgment by Seller. Cancellation Policy - Purchase orders accepted by Gardner Denver may be canceled only with Gardner Denver's written consent. Any cancellation at customer's request may result in a cancellation charge equal to: (a) if standard equipment, 20% of; and (b) if non-standard or special order equipment, one hundred per cent (100%) of the full contract price for equipment before any discount billable to customer. Governing Law - The language herein shall be construed and enforced under the Uniform Commercial Code as in effect in the State of Texas on the date hereof. Payment - Invoices submitted by Seller under this order are payable only in funds which are accepted at par in Houston, Texas. Whenever reasonable grounds for insecurity arise with respect to due performance by Buyer, Seller may demand different terms of payment from those specifi ed on the face of this Order and/or may demand assurance of Buyers due performance. Any such demand may be oral or in writing, and Seller may, upon the making of such demand, stop production and suspend shipments hereunder. If within the period stated in such demand Buyer fails or refuses to comply with the demand or demands of Seller, Seller may at its option, treat such failure or refusal as a repudiation of the portion of this Order which has not been fully performed, or may resume production and make shipment under reservation of possession or of a security interest and/or may demand payment against tender of documents of title. Taxes - Any sales, use or other similar type taxes imposed on this sale or on this transaction are not included in the price. Such taxes shall be billed separately to the Buyer. Seller will accept a valid exemption certifi cate from the buyer, if applicable; however, if an exemption certifi cate previously accepted is not subsequently recognized by the government taxing authority involved and the Seller is required to pay the tax covered by such exemption certifi cate, Buyer agrees to promptly reimburse Seller for the taxes paid. Transportation-Risk of Loss - Unless otherwise specifi ed, all prices are F.O.B. Sellers or suppliers shipping point. Title to products passes and risk of loss shall be the responsibility of Buyer when the products are put in possession of the carrier. Seller does not assume any responsibility for breakage, loss or damage in transit. Any claim on account of damaged products or short count shall be deemed waived by Buyer unless made within ten (10) days from the date of delivery of products to which such claims relates. Performance, Inspection and Acceptance - A. All products shall be fi nally inspected and accepted within ten (10) days after receipt at point of delivery. All claims whatsoever by Buyer (including claims for shortages) excepting only those provided for under the Warranty and Limitation of Liability and Patent Clauses hereof, must be asserted in writing by Buyer within said 10-day period or they are waived. If this contract involves partial performances, all such claims must be asserted within said 10-day period for each partial performance. There shall be no revocation of acceptance. Rejection may be only for defects substantially impairing the value of the products and the Buyer's remedy for lesser defects shall be those provided for under the Warranty and Limitation of Liability clause. B. Seller shall not be responsible for non-performance or delays in performance occasioned by any causes beyond Sellers reasonable control, including but not limited to, labor diffi culties, delays of vendors or carriers, acts of God or the public enemy, governmental actions and material shortages. Any delays so occasioned shall affect a corresponding extension of Sellers performance dates which are, in any event, understood to be approximate. In no event shall Buyer be entitled to damages, incidental, consequential or otherwise, for late performance or a failure to perform under the terms of this paragraph. C. If Buyer wrongfully rejects or revokes acceptance of items tendered under this Agreement or repudiates this Agreement, Seller shall have the right to recover as damages the price stated herein. Upon recovery of the price, the items involved shall become the property of the Buyer. D. Buyers representatives may inspect ordered goods at the plant during business hours prior to shipment, and inspection shall be in such manner as not to interfere with Sellers business operations. Warranty and Limitation of Liability - Seller warrants that the goods to be supplied hereunder will conform to the description on the face hereof, that the Seller will convey good title thereto; that such goods will be delivered free of any lawful security interest or other lien or encumbrance unknown to the Buyer; and that such goods will be free from defects in material and workmanship as follows: Pumps - For a period of one year from date of shipment, except wear parts. No warranty is made, either express or implied, for any defects, failures or malfunctions resulting from corrosion, misapplication, overpressurization, improper suction pressure or other misuse. Determination by Seller as to the cause of damage or defects shall be conclusive. Engines or Motors - Not warranted by Seller, but subject to warranty of original manufacturer. V-Belts - Not warranted. Skids, Trailers (excluding tires), Hose Reels and Hose Racks - For one year from date of shipment. Relief Valves - For six months from date of shipment. Gauge Snubbers - Not warranted. 51
Pressure Gauges, Hydro-Valves, High Pressure Manifolds - for ninety days from date of shipment. High Pressure Hose, Quick Connect Couplings - Not warranted. Abras-I-Jector, Fail-Safe Guns, Rigid Lances - For ninety days from date of shipment. Nozzle Tips, Tipholders, Carbide Inserts, Extensions, Miscellaneous Fittings - Not warranted. Flexible Lances - Hose - Not warranted. Coupling warranted for sixty days from date of shipment. Gardner Denver, Inc. products components and/or accessories not designated in this warranty are not warranted. SELLER MAKES NO WARRANTY EXPRESSED, IMPLIED OR STATUTORY, EXCEPT AS IS EXPRESSLY SET FORTH HEREIN. THE IMPLIED WAR- RANTY OF FITNESS FOR PARTICULAR PURPOSE IS EXPRESSLY EXCLUDED AND DISCLAIMED. During the warranty period specifi ed herein Seller will, as its option either repair or replace free of charge, F.O.B. Seller, such warranted equipment or parts as appear to Seller, upon inspection, to have been defective in materials or workmanship, providing Buyer promptly notifi es Seller in writing of the defect and promptly delivers defective equipment or parts to Seller, freight prepaid. Seller does not warrant any equipment or accessories, manufactured by others to be free of defects in materials and workmanship. If Seller determines such equipment or accessories to be defective in materials or workmanship, repair or replacement thereof is limited to allowance made to Seller by the original manufacturer, if any. SELLER SHALL NOT BE LIABLE FOR DAMAGES, CONSEQUENTIAL, INCIDENTAL, OR OTHERWISE CAUSED BY DEFECTIVE EQUIPMENT OR ACCESSORIES. SELLER'S LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE EQUIPMENT OR PARTS AS SET FORTH HEREINABOVE. SELLER WILL GRANT NO ALLOWANCE FOR ANY REPAIRS OR ALTERATIONS MADE BY BUYER WITHOUT WRITTEN CONSENT OF SELLER. Patents - Seller agrees to assume the defense of any suit for infringement of any United States patents brought against Buyer to the extent such suit charges infringement of an apparatus or product claim by Sellers product in and of itself, provided (i) said product is built entirely to Seller's design, (ii) Buyer notifi es Seller in writing of the fi ling of such suit within ten (10) days after service of process thereof, and (iii) Seller is given complete control of the defense of said suit, including the right to defend, settle and make changes in the product for the purpose of avoiding infringement. Seller assumes no responsibility for charges of infringement of any process or method claims unless infringement of such claims is the result of following specifi c instructions furnished by the Seller. Buyer agrees, for the products delivered under this Order, to indemnify Seller against all judgements, decrees and costs resulting from any United States Letters Patent to the extent that such infringement arises from designs, specifi cations or instructions furnished or expressly or impliedly required by Buyer. The sale of products covered by this Order shall not grant to Buyer any right or license of any kind under any patent owned or controlled by Seller or under which Seller is licensed but the foregoing shall not be understood to limit in any way the right of the Buyer to use and sell such goods in the event that such goods as sold hereunder are covered by any such patent. Indemnity - Buyer shall release, hold harmless, indemnify and defend Seller from and against any loss, liability, claim, suits and costs caused by, arising out of, or relating to the use or design of goods supplied hereunder or the design of the packages or containers in which they are shipped if such goods, packages or containers are made in compliance with Buyers design or specifi cations. Buyer will, on demand, reimburse Seller for all costs and expenses, including reasonable attorneys' fees incurred by Seller in enforcing any of its rights against Buyer under this contract. Orders - All orders are subject to acceptance and approval by Sellers Credit Department and are not binding until and unless so approved and accepted. Written acknowledgment of an order shall constitute acceptance and will thereby be a binding contract which cannot be modifi ed or cancelled by Buyer without written consent of Seller. Partial Shipments - Partial shipment of an order will not be made without Buyers knowledge or consent. In the event complete shipment cannot be made by the required date, Buyer will be notifi ed and asked whether entire shipment should be held or partial shipment made. If partial shipment with Buyer's approval is made, excess freight charges, if any, will be billed to the Buyer. Special Tooling - Notwithstanding any tool, die or pattern charges or amortization in connection herewith, all special tooling and related items shall be and remain the property of the Seller. Affidavits - Orders requiring affi davits or certifi cates of compliance must so state when orders are entered. Revisions to an order after it has been put into the production schedule may result in additional charges and/or delays in shipment date. International Shipments - Shipments to delivery points outside of the continental United States will be made only upon the Sellers prior receipt of the following documentation in form and substance acceptable to the Seller: A. Written evidence of establishment of irrevocable letter of credit in favor of Seller for an amount equal to or exceeding the full contract price hereunder, and on terms acceptable to the Seller. B. Import certifi cate properly issued by destination country where required. C. Where shipment is FAS port or vessel, written instructions to the Seller specifi cally identifying loading berth where equipment is to be delivered. Credit Terms - If the terms of payment hereunder call for any extension of credit by Seller to Buyer, Buyer hereby agrees that prior to payment in full, (i) the equipment sold hereunder is subject to a vendors lien and security interest in favor of Seller and (ii) Buyer will promptly execute and deliver to Seller such security agreements, Uniform Commercial Code fi nancing statements and other documents as are requested by Seller to refl ect this retention of a security interest. Past Due Accounts - Unless specifi cally provided for in the contract or in other written evidence of the agreement of Buyer and Seller, all amounts due hereunder that remain unpaid for more than 30 days after the payment date shall bear interest at the highest contract rate allowed by the state law governing this transaction. Warning: Gardner Denver products are potentially hazardous equipment and may impose a risk of harm if not used properly and in accordance with instructions provided by Gardner Denver or other manufacturer's instructions. By its acknowledgment and acceptance of these Terms and Conditions of Sale, Buyer acknowledges that it has been provided with these instructions for the safe use of the products, and its component and accessory parts, and that it will properly advise its employees (and any other persons reasonably expected to make use of the products) of the use of the equipment, including, but not limited to, instructions as to the proper safety devices to be worn or utilized in connection with the operation of the products, subject only to any express warranty provided by Gardner Denver herein, and, without limiting any other indemnity provided by Buyer under these Terms and Conditions of Sale, Buyer does and shall release, hold harmless, indemnify and defend Gardner Denver from and against any loss, liability, claim, suit and costs (including attorney's fees) third party or otherwise, caused by, or arising out of or relating to the operation of, the products. 52
The Complete Source for HIGH PRESSURE WATER BLASTING Gardner Denver Water Jetting Systems, Inc. is the one stop source for all your waterblasting needs. We manufacture the most complete line of waterjetting systems at our state-of-the-art facility in Houston, Texas. Our extensive product range includes: Liqua-Blaster diesel and electric waterjetting units with pressures to 40,000 PSI, and 2,000 HP. Partek Pumps - 5-40 Kpsi, and 60-2,000 HP. Gardner Denver Water Jetting Systems, Inc. also offers replacement parts for many popular pump brands including NLB, American Waterblaster and Geoquip. We specialize in products that can handle pressures from 5,000 to 40,000 PSI. Call us to see how you can benefi t from dealing with a direct manufacturer with a complete product line, eager customer service and on-time delivery. Gardner Denver Water Jetting Systems, Inc. is an O.E.M. supplier for Polyfl ex Ultra High Pressure Thermoplastic Hose, and StoneAge water blasting tools and accessories. 10,000-15,000 PSI 15K Dry Shut Guns 15K Dump Style Control Guns HI-FLOW Foot Guns (125 GPM) Nozzles Flow Splitters Fittings Flex and Rigid Lances Rupture Discs Pressure Regulating Valves Auto Throttle Controls and Much More! 20,000 PSI 20K Dry Shut Guns 20K Dump Style Control Guns Nozzles Flow Splitters Hoses Fittings Flex and Rigid Lances Rotary Nozzles and Much More! 40,000 PSI Vulcan Series Rotary Control Gun Multi-Mode TM Control Valve 40K Dump Style Foot and Hand Guns 40K Rotary Line Cleaners/Flex Lancers Sapphire Nozzle Assemblies Couplers Rigid Lances (Autoclave and Button Seal) Replacement Wear Components for Intensifi ers Safety Equipment Rigid Lance Safety Holders Safety Whip Hoses Hose Whip Checks TurtleSkin TM Water Armor Safety Shroud Assemblies Strain Relief Whip Hoses Line Mole Backout Preventers Call us for all of your Water Blasting Needs! 1-800-231-3628 12300 North Houston-Rosslyn Road Houston, TX 77086
GARDNER DENVER WATER JETTING SYSTEMS, INC. 12300 N. Houston-Rosslyn Road Houston, TX 77086 USA Tel: 281-448-5800 Fax: 281-448-7500 Toll Free in North America: 1-800-231-3628