Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi
|
|
- Anis Jordan
- 5 years ago
- Views:
Transcription
1 Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Medium Pressure Valves feature: Rising stem design. 316SS wetted parts with a 17-4 P stem provides excellent corrosion resistance. Metal-to-metal seating achieves bubble-tight shut-off, longer stem and seat life, greater durability for repeated open and close cycles. PT and carbon packing with metal back-up rings offers reliable stem to body sealing. Non-rotating stem prevents stem to seat galling. Stem sleeve and packing gland materials have been selected to achieve optimum thread cycle life and reduced handle torque. ll stem sleeve threads are rolled, assuring smooth operation. Safety weep holes for all pressure connections and packing area. Six different valve body patterns, with choice of vee or regulating type stem tip. MXPRO offers a complete line of medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies. ll medium pressure valves and fittings use the medium pressure style connection. This coned and threaded connection features orifice sizes to match the high flow characteristics of the medium pressure valve, fitting and tubing line. Medium Pressure ndex Valves ittings...4 nti-vibration ollet land ssemblies... Tubing....6 oned and Threaded Nipples....7 heck Valves...8 Line ilters...9 ngle ilters Safety ead ssemblies and Rupture iscs Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Maxpro Technologies, nc Klier rive South airview Pennsylvania 1641 Phone: ax: website: ll general terms and conditions of sale, including limitations of MT R6 021 TNOLOS Printed in the US 1
2 Medium Pressure Valves Pressures to 22,00 psi TNOLOS MXMTOR medium pressure valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation). ll medium pressure valves include glands and collars. Ordering nformation Typical catalog number: 21V4MO71 Pressure/Temp. O.. onnection Orifice Rated v* Rating R.T.)** 1/ 4 4M ,00 3/ 8 6M ,00 9/ 16 9M ,00 3/ 4 12M , M ,00 * v values shown are for 2-way straight pattern vee stem valves. or 2-way angle patterns, increase the v value by 0%. ** See page 2 in the Technical Section for Pressure/Temperature Rating hart. 21V 4M 07 1 OPTONS Valve Series O.. Tube 21V 4M 1 / 4 " 6M 3 / 8 " 9M 9 / 16 " 12M 3 / 4 " 16M 1" Stem ody Pattern xtreme temperature 07 V stem 08 RULTN stem (tapered tip for regulating and shutoff) 87 V stem with replaceable seat 88 RULTN stem with replaceable seat 1 two-way straight 2 two-way angle 3 three-way, two on pressure 4 three-way, one on pressure three-way, two-stem manifold option, see below. Number of turns open low oefficient Reference urves (v) Regulating Stem Vee Stem Special esigns for xtreme Temperatures Standard valves are supplied with Teflon/arbon packing and may be operated to 40. igh temperature packing and/or extended stuffing box are available for service from -423 to 1200 by adding the following suffixes to catalog order number. - T standard valve with teflon glass packing to Y standard valve with graphite braided yarn packing to T extended stuffing box valve with graphite braided yarn packing to standard valve with cryogenic trim materials and Teflon packing to LT extended stuffing box valve with teflon packing and cryogenic trim materials to Repair Kits onsult your MXPRO representative for repair kits and valve bodies. Refer to the Tools and nstallation section for proper maintenance procedures % of rated v Positive Locking evice 316 SS Valve ody available in six patterns djustable Packing oned and Threaded Tubing onnections nodized luminum andle Low riction Packing land Non-Rotating Stem (Vee & Regulating esigns) nti-xtrusion Seal Rings Metal to Metal Seating Valve Shown: 21V9MO71 2 ll general terms and conditions of sale, including limitations of MT R6 021
3 TNOLOS Medium Pressure Valves Pressures to 22,00 psi Valve Pattern 2-Way Straight 2-Way ngle 3-Way / 2 on Pressure 3-Way / 1 on Pressure 3-Way / 2-Stem Manifold K K atalog Number 2-Way ngle / Replaceable Seat Stem O.. Tube Orifice imensions K Valve lock Panel Thickness ole 21V4M071 Vee 21V4M081 Reg 1 / V6M071 Vee 21V6M081 Reg 3 / V9M071 Vee 21V9M081 Reg 9 / V12M071 Vee 21V12M081 Reg 3 / V16M071 Vee 21V16M081 Reg V4M072 Vee 21V4M082 Reg 1 / V6M072 Vee 21V6M082 Reg 3 / V9M072 Vee 21V9M082 Reg 9 / V12M072 Vee 21V12M082 Reg 3 / V16M072 Vee 21V16M082 Reg V4M073 Vee 21V4M083 Reg 1 / V6M073 Vee 21V6M083 Reg 3 / V9M073 Vee 21V9M083 Reg 9 / V12M073 Vee 21V12M083 Reg 3 / V16M073 Vee 21V16M083 Reg V4M074 Vee 21V4M084 Reg 1 / V6M074 Vee 21V6M084 Reg 3 / V9M074 Vee 21V9M084 Reg 9 / V12M074 Vee 21V12M084 Reg 3 / V16M074 Vee 21V16M084 Reg V4M07 Vee 21V4M08 Reg 1 / V6M07 Vee 21V6M08 Reg 3 / V9M07 Vee 21V9M08 Reg 9 / V12M07 Vee 21V12M08 Reg 3 / V16M07 Vee 21V16M08 Reg V4M872 Vee 1 / K 21V4M882 Reg 21V6M872 Vee 3 / V6M882 Reg 21V9M872 Vee 9 / V9M882 Reg 21V12M872 Vee 3 / V12M882 Reg 21V16M872 Vee V16M882 Reg ll general terms and conditions of sale, including limitations of - Panel mounting screw thread size UN. ll dimensions are for reference only and are subject to change. MT R6 021 K 3
4 Medium Pressure ittings Pressures to 22,00 psi medium scrap high ultra high TNOLOS MXMTOR medium pressure fittings are designed with the large orifice for use with the 21V series medium pressure valves and medium pressure tubing. ll medium pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees, and crosses. medium scrap high ultra high Tubing land ollar Plug Tubing ap 1 / 4 214M 214M 21P4M 21T4M 3 / 8 216M 216M 21P6M 21T6M 9 / M 219M 21P9M 21T9M 3 / M 2112M 21P12M 21T12M M 2116M 21P16M 21T16M onnection omponents ll medium pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed. 4 lbow Tee ross Straight oupling / Union oupling ulkhead oupling itting Pattern max. panel hole atalog Number 21L4M 4M 1 / L6M 6M 3 / L9M 9M 9 / L12M 12M 3 / L16M 16M T4M 4M 1 / T6M 6M 3 / T9M 9M 9 / T12M 12M 3 / T16M 16M X4M 4M 1 / X6M 6M 3 / X9M 9M 9 / X12M 12M 3 / X16M 16M M 21U4M 216M 21U6M 219M 21U9M 2112M 21U12M 2116M 21U16M onnection O.. Tube ll dimensions are for reference only and are subject to change. See page 2 in the Technical Section for determining operating pressures above room temperature. Orifice 4M 1 / M 3 / M 9 / M 3 / M imensions 214M 4M 1 / M 6M 3 / M 9M 9 / M 12M 3 / M 16M Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling lock Thickness ll general terms and conditions of sale, including limitations of MT R6 021
5 TNOLOS nti-vibration ollet land ssembly Pressures to 22,00 psi MXMTOR anti-vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard medium pressure coned and threaded tube connections. n a normal coned and threaded tube connection, any external mechanical loading on the tubing lines, valves or fittings would be concentrated on the first thread of the tube. This can cause failure of the tube at this thinner cross-section. The anti-vibration collet gland assembly grips the tube behind the connection, supporting the tube at the full cross-section and straight area, moving the loading away from the threaded area. The back part of the assembly has a gland nut that, when tightened properly, compresses a split collet on the tube, providing the beneficial gripping action. ll anti-vibration collet gland assemblies come with a Molybdenum isulfide oating to guard against galling of the stainless components. land Pattern atalog Number Part O.. Tubing imensions (ex.) (ex.) 21V4M omplete ssembly 21V4M 21V4M 21V4M ollet ody Slotted ollet land Nut 1/ V6M omplete ssembly 21V6M 21V6M ollet ody Slotted ollet 3/ V6M land Nut 21V9M omplete ssembly 21V9M 21V9M ollet ody Slotted ollet 9/ V9M land Nut 21V12M omplete ssembly 21V12M 21V12M ollet ody Slotted ollet 3/ V12M 21V16M land Nut omplete ssembly 21V16M 21V16M 21V16M ollet ody Slotted ollet land Nut ll dimensions are for reference only and subject to change. ll general terms and conditions of sale, including limitations of MT R6 021
6 Medium Pressure Tubing Pressures to 22,00 psi TNOLOS MXPRO offers a line of cold drawn thick wall tubing, with flow areas to compliment the large orifice medium pressure valves and fittings. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the medium pressure coned and threaded connections. The standard materials are 304 and 316 stainless steels. Other materials may be provided on special request, depending on the specific material, diameters and lengths. Tubing Tolerances Normal Tubing Tolerance O.. 1/ / / / / / 0.2 3/ / / atalog Number Tube Material its onnection Tube Working Pressure (psi) O to 100º 200º 400º 600º 800º 21TU4M TU4M TU6M TU6M TU9M TU9M-304 1TU9M-316 1TU9M SS 304SS 316SS 304SS 316SS 304SS 316SS 304SS 4M 1 / ,00 18,900 17,430 1,960 1,120 6M 3 / ,00 18,900 17,430 1,960 1,120 9M 9 / ,00 18,900 17,430 1,960 1,120 9M 9 / ,200 13,680 12,616 11,2 10, ,00 18,900 17,430 1,960 1,120 21TU12M SS 12M 3 / 4 1TU12M SS ,200 13,680 12,616 11,2 10,944 21TU16M SS ,00 18,900 17,430 1,960 1,120 16M 1 1TU16M SS ,200 13,680 12,616 11,2 10,944 ll dimensions are for reference only and subject to change. 6 ll general terms and conditions of sale, including limitations of MT R6 021
7 TNOLOS oned and Threaded Nipples Pressures to 22,00 psi MXPRO offers a line of coned and threaded medium pressure tube nipples in a variety of lengths for all standard tube sizes. The coned and threaded medium pressure tube nipples are available in 316 stainless steel. They are also available in the 1,200 psi or 22,00 psi versions for the 9/16, 3/4 and 1 O tube sizes. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXPRO for availability and price. 2.7" 3" atalog Numbers are 316 Stainless Steel material 4" 6" 8" 10" 12" its onnection Tube Working Pressure O.... at 100 (psi) 21N4M N4M N4M N4M N4M N4M N4M M 1 / ,00 21N6M N6M N6M N6M N6M N6M M 3 / ,00 21N9M N9M N9M N9M N9M N9M M 9 / ,00 1N9M N9M N9M N9M N9M M 9 / ,200 21N12M N12M N12M N12M N12M M 3 / ,00 1N12M N12M N12M N12M M 3 / ,200 21N16M N16M N16M N16M M ,00 1N16M N16M N16M N16M M ,200 Standard nipples are not supplied with glands and collars, see ittings on page 4 for these components. See adjacent Tubing page 6, for pressure/temperature rating chart. ll dimensions are for reference only and subject to change. ll general terms and conditions of sale, including limitations of MT R
8 heck Valves Pressures to 22,00 psi TNOLOS O-Ring heck Valves O-Ring heck Valves MXMTOR o-ring check valves provide high quality directional flow control and tight shutoff for liquids and gases. ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316 series stainless steel Spring: 300 series stainless steel O-ring: Viton (-4 to 392 )* all heck Valves all heck Valves MXMTOR ball check valves prevent reverse flow where bubble tight shutoff is not mandatory. These check valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimize pressure drop. heck valves are rated to 660 *. ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316 series stainless steel all and spring: 300 series stainless steel Valve Pattern atalog Number Pressure Rating (psi) O.. Tube onnection Orifice Rated (v) imensions (ex.) O-Ring heck Valves 21O4M 22,00 1/4 4M O6M 22,00 3/8 6M O9M 22,00 9/16 9M low 21O12M 22,00 3/4 12M O16M 22, M all heck Valves 214M 22,00 1/4 4M M 22,00 3/8 6M M 22,00 9/16 9M low 2112M 22,00 3/4 12M M 22, M UTON: RQUNT NSPTONS of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life. ll dimensions are for reference only and subject to change. See page 2 in the Technical Section for determining operating pressures above room temperature. 8 ll general terms and conditions of sale, including limitations of MT R6 021
9 TNOLOS Line ilters Pressures to 22,00 psi ual-isc Line ilters MXMTOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. ilter elements come standard in the following micron sizes: /8, 8/30, 30/6 (secondary/primary). ilters are rated for temperatures -60 to 660 *. ll line filters come with glands and collars. Materials ody: cover, cover gland: 316 series stainless steel lement: 300 series stainless steel up- Line ilters MXMTOR cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. ilter elements come standard in, 30, or 6 micron sizes and are easily replaced. ilters are rated for temperatures -60 to 660 *. ll line filters come with glands and collars. Materials: ody, cover, cover gland: 316 series stainless steel lement: 300 series stainless steel ual-isc Line ilters low up- Line ilters low atalog Number ual-isc Line ilters up- Line ilters Pressure Rating (psi) O.. Tube onnection Orifice Micron 219M - /8 /8 219M - 8/30 22,00 9/16 9M /30 219M - 30/6 30/6 214M- 214M-30 22,00 1/4 4M M M- 216M-30 22,00 3/8 6M M M- 219M-30 22,00 9/16 9M M M- 2112M-30 22,00 3/4 12M M M- 2116M-30 22, M M-6 6 ilter lement rea (in. 2 ) imensions (ex.) t is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements. ll general terms and conditions of sale, including limitations of MT R6 021 ll dimensions for reference only and are subject to change. See page 2 in the Technical Section for determining operating pressures above room temperature. 9
10 ngle ilters Pressures to 22,00 psi TNOLOS ngle ilters MXMTOR angle filters are used to filter gases or liquids in high pressure systems. The filter elements can be easily changed. The special design allows the exchange of the filter element without the need to first disassemble the filter in front of the tubing. ilter elements are made of sintered material with pore sizes of µm, 30 µm or 6 µm. ilters are rated for temperatures -423 to 660. ll angle filters come with glands and collars. Materials ody: cover, cover gland: 316L series stainless steel lement: 316 stainless steel ngle ilters atalog Number Pressure Rating psi Orifice inches onnection Micron ilter lement reas in 2 imensions (ex) (ex) lock Thickness 214M- 214M-30 22, M M M- 216M-30 22, M M M- 219M-30 22, M M M- 2112M-30 22, M M M- 2116M-30 22, M M-6 6 t is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements. ll dimensions for reference only and are subject to change. 10 ll general terms and conditions of sale, including limitations of MT R6 021
11 TNOLOS Safety ead ssembly Pressures to 22,00 psi MXMTOR safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate ¼ angular rupture disc listed in the chart below. old-down nut torque vs. rupture disc pressure RT ody Safety ead ssembly Rupture isc (not included) old-down Ring old-down Nut urst RT (psi) 30,000 20,000 10,000 0 ¼ ng. isc Torque (ft - lbs) 3/8" NPT emale onnection Safety ead ssembly atalog Number without isc its onnection O.. Tube Pressure Rating (psi) ody Torque (ft - lbs.) (ex.) (ex.) imensions (L.) (..) (..) 21S4M 4M 1/4 22, S6M 6M 3/8 22, S9M 9M 9/16 22, S12M 12M 3/4 22, S16M 16M 1 22, See page 2 in the Technical Section for determining operating pressures above room temperature. ll dimensions for reference only and are subject to change. ¼" ngular Rupture iscs 1/ 4 " angular seat rupture discs are designed to be used with the safety head assemblies that are show above. Minimum rupture disc pressure ratings should be at least 110% of system operating pressure. The standard material is nconel. The pressure ranges indicated in the table below are at room temperature (72 ). Other materials and pressure ranges are available upon request. atalog Number Pressure range (psi) atalog Number Pressure range (psi) atalog Number Pressure range (psi) R ,060 R ,164-1,272 R-100 1,4-1,90 R-170 1,697-1,8 R ,940-2,120 R-200 2,42-2,60 R ,910-3,180 R-300 3,39-3,710 R ,880-4,240 R-400 4,36-4,770 R-000 4,80 -,300 ll dimensions for reference only and are subject to change. R-00,33 -,830 R-6000,820-6,360 R-600 6,30-6,890 R ,790-7,420 R-700 7,27-7,90 R ,760-8,480 R-800 8,24-9,010 R ,730-9,40 R-900 9,21-10,070 R ,700-10,600 R ,670-11,660 R ,640-12,720 R ,610-13,780 R ,80-14,840 R ,0-1,900 R ,20-16,960 R ,490-18,020 R ,460-19,080 R ,430-20,140 R ,400-21,200 R ,370-22,260 R ,340-23,320 ll general terms and conditions of sale, including limitations of MT R
Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationSpecialty Products. Specialty Products Index
Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationHigh Pressure Check Valves
High Pressure heck Valves Pressures to 60,000 psi (4137 bar) O-Ring heck Valves Minimum operating temperature for standard o-ring check valves 0 F (-17.8 ). For low temperature option to -423 F (-252 )
More informationHydrogen Valves, Fittings and Tubing
Hydrogen Valves, Fittings and Tubing utech is a leading brand of high-pressure valves, fittings and tubing designed to meet the critical requirements of today s most severe applications. We prove our commitment
More informationTools & Installation. Tools & Installation Index
L Radius +0 59-2 32 60 +2 A B -0 32 C E F.09" ia. Weep Hole Tools & Installation MAXIMATOR offers manual Coning and Threading tools that are designed to prepare accurate tubing ends to accept the medium,
More informationGeneral Information valve design valve selector guide catalog numbering system warranty terms
CERTIFIED High Equipment Table of Contents 2 eneral Information valve design valve selector guide catalog numbering system warranty terms Low Valves, Fittings and Tubing - 0,000 and 5,000 psi service Taper
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationHigh Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
More informationHIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Ultra Valve cross sections Handle Gland with packing of copper aluminium alloy for smooth running Body Non- stem of 17-4 PH prevents scoring
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationLRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationInstruction Manual Updated 7/26/2011 Ver. 2.2
4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationBall Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
More informationCOMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL
COMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL SPECIFICATIONS: The CARD series air valves are available in 3 pipe sizes, 1, 2 and 4 NPT or socket. Maximum inlet pressure
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationClean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
More informationINSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationTEK-M ANIFOLD 7500A. Manifolds. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys ACCESSORIES
Technology Solutions TEK-M ANIFOLD 7500A Manifolds ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Tek-Manifold 7500A is available
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationInstallation Operation Maintenance
682 Seal Cooler New generation seal cooler to meet and exceed the seal cooler requirements stated in the 4th Edition of API Standard 682 Installation Operation Maintenance Experience In Motion Description
More informationSERIES tough and packed with features. Specialists in Valves, Controls, Pneumatics and Fluid Measurement
AX: 3.6.833 n www.okautomation.com Specialists in Valves, ontrols, Pneumatics and luid Measurement 4 8...tough and packed with features POSITION MONITORING (OPTIONAL) Signaling box with dual mechanical
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationJSHM Series Hand Metering Valves
Hand metering valve for precise manual control of iopharm and Pharmaceutical gas or liquids The JSHM Series allows precision manual adjustment of pharmaceutical liquid and gas flows. These valves are most
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More information3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II 306M User Manual English Version Use for company in Europe who will place the product on the market, please
More informationAvenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationVariable Area Flow Meters
Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more
More informationBinks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP
Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where
More informationVB-7211 Series. Application. Features. Applicable Literature. 1/2" to 1-1/4" Union End NPT Stem Up Open, Two-Way Valves General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VB-7211 Series 1/2" to 1-1/4" Union End NPT Stem Up Open, Two-Way Valves General Instructions Application VB-7211 series stem
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationModel 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual
10-12 Steel Pipe Squeezer Sch. 40 & Sch. 80 Operations Manual 1.0 Introduction This manual is issued as a basic operation manual covering the Regent Model 7989T, Pipe Squeezer and Pump as manufactured
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationSample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
More informationGo to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
More informationMedium Pressure Products MPI Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range. Catalog 4234 Revised, September 2003
Medium Pressure Products Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range Catalog 4234 Revised, September 2003 Fittings Medium Pressure Fittings Introduction Parker Hannifin Fittings* have
More informationVCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
More informationVB-7263 Series. Application. Features. Applicable Literature
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VB-7263 Series 1/2" to 2" Screwed NPT Stainless Steel Trim with Teflon Disc Stem Up Closed, Two-Way Valves General Instructions
More informationINSTALLATION, OPERATING & MAINTENANCE MANUAL WATER DRAIN VALVE
INSTALLATION, OPERATING & MAINTENANCE MANUAL WATER DRAIN VALVE Contents 1 Introduction 1. Introduction... 3 2. Specification... 4 3. Installation... 7 4. Operation...11 5. Maintenance...14 This Water Drain
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationDescription Advanced Features Typical Applications
Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied
More informationGauge Valves / Multi-Port Valves & Air Distribution Manifolds
auge Valves / Multi-Port Valves & ir istribution Manifolds OV Series Orifice valves 6,000 psi and 10,000 psi rated V Series Multi-port gauge valves 6,000 psi and 10,000 psi rated PV Series Rising plug
More informationBladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?
General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of
More informationIntru-lok Flareless Bite Type Fittings
Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2
More informationTHE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)
THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationParker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
More informationSECTION I REGULATORS
SECTION I REULATORS Applications Pressure Regulation for Steam Distribution Single Point or Multiple Use Applications Pressure Control for Steam Plants District Heating Systems Single Stage Reduction Stations
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationJSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
More informationKECKLEY INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS TYPE NO. 7 FLOAT VALVE
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS TYPE NO. 7 FLOAT VALVE APPLICATION/SERVICE: The NO. 7 internally piloted valves are recommended where tight closing is essential. The NO. 7 is most
More informationVB-7213 Series. Application. Features. Applicable Literature. 1/2" to 2" Screwed NPT Stem Up Open, Two-Way Valves General Instructions
VB-7213 Series 1/2" to 2" Screwed NPT Stem Up Open, Two-Way Valves General Instructions Application VB-7213 series single seat, stem up open, two-way valves control water from 20 to 281 F (-7 to 138 C)
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationPlant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle
More informationVB-7323 Series. Application. Features. Applicable Literature. 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions
VB-7323 Series 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions Application VB-7323 series three-way diverting valves control hot or chilled water in heating or air conditioning systems.
More informationVB-7273 Series. Application. Features. Applicable Literature
VB-7273 Series 1/2" to 2" Screwed NPT Stainless Steel Trim Stem Up Open, Two-Way Valves General Instructions Application VB-7273 series single seat, stem down to close, two-way valves control water from
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationInstallation Instructions
48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical
More informationCentury Valve. Flow Control. Century Valve Hand Valves, Large Bore, Severe Service, and Isolation Valves. Total Flow Control Solutions.
Century Valve Bore Sizes: 1/8 [3.2 mm] 3/16 [4.8 mm] 5/16 [8 mm] 3/8 [9.5 mm ] 7/16 [11 mm] 5/8 [16 mm] Straight through (roddable) and globe-pattern models. Needle (rising plug) and ball stem end models.
More informationMultiple Connection Manifolds
ultiple onnection anifolds PNUAYN, IN. atalog 2400 Phone 763-559-0177 ax 763-559-0547 eatures l 2 to 10 stations l Inline anifolds, 90 anifolds, ual Air, unction locks and Terminal locks l ustom designs
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationFilter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator
More informationTelefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
More informationCover headline. Cover subheadline. Check Valves
Check Valves Cover headline Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Cover subheadline EATON Screw-In Cartridge Valves E-VLSC-MC-E December
More informationMAINTENANCE PROCEDURE FOR X 650
MAINTENANCE PROCEDURE FOR X 650 X 650 25. juli 2005-1/6 MAINTENANCE PROCEDURE FOR X 650 2 ND STAGE WARNING: This maintenance procedure is only for appointed Scubapro technicians that completed a course
More informationINSTALLATION & MAINTENANCE INSTRUCTION
ARCHON Industries, Inc Liquid Level Gauges Models: BT-LLG ND-LLG INSTALLATION & MAINTENANCE INSTRUCTION Instruction No.: 1014.2 Revision Issued: 3/01/03 Approved: Engineering Manager Warning ONLY QUALIFIED
More informationCA16 and CA16S-14 Air and Gas trap Installation and Maintenance Instructions
1483250/3 IM-P148-10 ST Issue 3 CA16 and CA16S-14 Air and Gas trap Installation and Maintenance Instructions 1 General safety information CA16 and CA16S-14 ½" and ¾" 2 General product information 3 Installation
More informationModel PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure
More informationSpilt body Flange ball valve. TC-205MFF-PN1640 User Manual English Version. Document No: TC-205MFF-PN1640.Ur-manual. Date: 2007/04/2617. Version: 1.
Spilt body Flange ball valve TC-205MFF-PN1640 Series PED Category I,II TC-205MFF-PN1640 User Manual English Version Use for company in Europe who will place the product on the market, please amend which
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationMounting and Operating Instructions EB 2172 EN. Series 43 Temperature Regulators. Type 43-5 and Type Type Type 43-6
Series 43 Temperature Regulators Type 43-5 and Type 43-7 Type 43-6 Type 43-6 Type 43-7 with flanged valve body, DN 32 to 50 Type 43-5 Type 43-7 with welding ends Mounting and Operating Instructions EB
More informationLRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
More informationLogic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)
Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationHip Air Operated Valves
Hydraulic & Offshore Supplies Hip Air Operated s YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Air Operated s High Pressure Equipment Company
More informationRHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
More information(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationInstallation Instructions
Installation Instructions TM Five Star Seal 80 Series Dual, Cartridge Mounted, Flexible Stator Pusher Seal Designed for General Service Applications 86 and 87 Experience In Motion Description The 86/87
More informationINDUSTRIAL VALVES MODELS: C62-A; C62-D. INSTRUCTION MANUAL Installation Operation Parts Service DIAPHRAGM BYPASS PRESSURE REGULATING VALVES
INSTRUCTION MANUAL Installation Operation Parts Service IMPORTANT Record your Regulator model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationRegulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)
eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof
More information