IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: January 2018 Void After: January 2019 Dba: Wdi Plbg. Inc. & Wdi Intl 3 Musick Irvine, CA 92618 Identification: Manufacturer's name or trademark, model name or number (or part number), and critical level shall be permanently and legibly marked so as to be visible after installation. The product shall also bear the cupc certification mark. Characteristics: Anti-Siphon type flush tank fill valves to be installed in accordance with the manufacturer's instruction and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada International Plumbing Code (IPC ) This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
Products are in compliance with the following standard(s): ASSE 1002-2015/ASME A112.1002-2015/CSA B125.12-15
MODELS: B1025 B1026 B1030 B1046 B1048 B2026 B2046 B2048 B3026 B3046 B3048 B3111 B3121 B3200 B3260 B3300-X B3310E B3310Y B3500 B3700 B3800L B3800W B3831E B3831L B3831W B3832E B3832L B3832W B3833L B3833W B3834E B3834L B3834W B3835L B3835W B3836L B3836W Description Adjustable Height 8" Screw down toilet fill valve Non-adjustable height anti-siphon fill valve 8" Snap-Cap Fill Valve 8.5" Snap-Cap w/ POM Float Rod 10" Screw down toilet fill valve 10" Snap-Cap fill valve 10" Snap-Cap w/ POM Float Rod 12" Rigid, fixed height shaft 12" Snap-Cap fill valve w/float rod, Anti-Siphon 12" Snap-Cap w/ POM Float Rod 11" Pilot type fill valve 9" 14" Adjustable Pilot type fill valve Side mount anti-siphon fill valve Adjustable Height Shank Plastic anti-siphon with E= 32 mm CL Adjustable Height Shank Plastic anti-siphon with Y= 55 mm CL Adjustable Height plastic Anti-siphon fill valve Adjustable height anti-siphon fill valve 7" overall height w/ a 6" C/L Fixed Shank 8" Fixed Shank Anti-siphon fill valve 8" Fixed Shank Anti-siphon fill valve 8" overall height w/ a 7" C/L Fixed Shank 7" Fixed Shank Anti-siphon fill valve 7" Fixed Shank Anti-siphon fill valve 9" Fixed Shank Anti-siphon fill valve 9" Fixed Shank Anti-siphon fill valve 9" overall height w/ 8" C/L shank 10" Fixed Shank Anti-siphon fill valve 10" Fixed Shank Anti-siphon fill valve 11" Fixed Shank Anti-siphon fill valve 11" Fixed Shank Anti-siphon fill valve 12.5" Fixed Shank Anti-siphon fill valve 12.5" Fixed Shank Anti-siphon fill valve B3800 and B3800E adjustable height B3833 and B3833E fixed shank, 10.75" height B3834 and B3834E Fixed Shank 8.75" height B3835 and B3835E fixed shank, 13" height Page 3 of 6
B3836 and B3836E 14/25" height B3200-C (Fill Valve Side Mount ) W3910 Fill Valve Suffixes: X = M adjustment bottom-in fill valve = Y non-adjustment bottom-in fill valve Page 4 of 6
ADDITIONAL COMPANY INFO: Axent B3910 Description Fill Valve Gerber Plumbing Fixtures Corporation PN 99-646 Description Adjustable height Kohler Company Description 1110423 Non-adjustable height anti-siphon fill valve Larsen Supply Company Description PN 04-4044 8.5" Snap-Cap w/ POM Float Rod PN 04-4027-1 12" Snap-Cap w/ POM Float Rod PN 04-4030-1 10" Snap-Cap w/ POM Float Rod PN 04-4036-1 Adjustable Height 04-4041 Adjustable Height Toto USA Inc. Description B3833E Fixed shank, 10.75" height B3834E Fixed Shank 8.75" B3835E Fixed shank, 13" height *NOTE: TOTO Models may be listed with G-Max or Power Gravity embossed on the cap cover Waxman Industries, Inc. - Consumer Product Group Pilot Pin Style Water Closet Fill Valve CPG 7030-400 & 410 & 450 CPG 7030-500 & 510 & 550 Snap On Cap Ballcocks Page 5 of 6
CPG 7030-600 & 610 & 650 CPG 7030-700 & 712 & 750 Screw Cap Ballcocks CPG 9900100 CPG 0811100A CPG 3026 Oatey Company Description 090214 12" Snap-Cap fill valve w/float rod, Anti-Siphon Page 6 of 6