Effective Date: May 2017 Void After: May Product: Press and Nail Connections File No. M-8332
|
|
- Elaine Roberts
- 6 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: May 2017 Void After: May N. Broadway 6th Floor Wichita, KS Identification: Each fitting, tube and pipe shall be permanently marked with the manufacturer's name or trademark, nominal size. The product shall also have the UMC certification mark. Characteristics: Products covered here include fittings, tube, and pipe with press or nail connection ends combined with other types of connections (e.g., threaded, soldered, and push fit). The press and nail connections are made with(a) copper or copper alloy fittings and Type K, L, and M copper tube; (b) carbon steel fittings and Schedule 10 and 40 carbon steel pipe; or (c) stainless steel fittings and Schedule 5, 10, and 40 stainless steel pipe. Carbon steel fittings and pipe covered by this Standard are not intended to be used in plumbing systems. The fittings shall be installed in accordance with the manufacturer's instructions and the latest edition of the Uniform Mechanical Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 Products are in compliance with the following code(s): Uniform Mechanical Code (UMC ) Products are in compliance with the following standard(s): IAPMO PS ae1
3 MODELS: Mega Press Carbon Steel Coupling P x P with stop / / / Carbon Steel Coupling P x P Without Stop / / / / Carbon Steel Adapter P x M /4 x 3/4 M /4 x 3/4 M x 1 M /4 x 1-1/4 M /2 x 1-1/2 M x 2 M Carbon Steel Adapter P x F /4 x 3/4 F /4 x 3/4 F x 1 F /4 x 1-1/4 F /2 x 1-1/2 F x 2 F /4 x 3/4 F x 3/4 F x 3/4 F /4 x 3/4 F /4 x 3/4 F /4 x 1 F /2 x 3/4 F Page 3 of 6
4 /2 x 3/4 F /2 x 1 F /2 x 1-1/4 F x 3/4 F x 3/4 F x 1 F x 1-1/4 F x 1-1/2 F Carbon Steel Elbow 90 deg. P x P / / / / Carbon Steel Elbow 90 deg. FTG x P / / / / Carbon Steel Elbow 45 deg. P x P / / / / Carbon Steel Elbow 45 deg. FTG x P / / / / Page 4 of 6
5 Carbon Steel Tee P x P x P / / / / /4 x 3/4 x 3/ x 1 x 3/ x 1 x 3/ /4 x 1-1/4 x /2 x 1-1/2 x 3/ /2 x 1-1/2 x 3/ /2 x 1-1/2 x /2 x 1-1/2 x 1-1/ x 2 x 3/ x 2 x 3/ x 2 x x 2 x 1-1/ x 2 x 1-1/2 Carbon Steel Tee P x P x F /4 x 3/4 x 3/4 F /4 x 3/4 x 3/4 F x 1 x 3/4 F x 1 x 3/4 F /4 x 1-1/4 x 3/4 F /2 x 1-1/2 x 3/4 F /2 x 1-1/2 x 3/4 F /2 x 1-1/2 x 1 F /2 x 1-1/2 x 1-1/4 F x 2 x 3/4 F x 2 x 3/4 F x 2 x 1 F x 2 x 1-1/4 F x 2 x 1-1/2 F Carbon Steel Union P x P Page 5 of 6
6 / / / / Carbon Steel Flange P x BP / / / / Carbon Steel Reducer FTG x P /4 x 3/ x 3/ x 3/ /4 x /2 x 3/ /2 x /2 x 1-1/ x x 1-1/ x 1-1/2 Carbon Steel Cap P / / / / Page 6 of 6
Effective Date: April 2018 Void After: April 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: February 2018 Void After: February Product: Bathtubs (Plastic) File No. 3638
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December 2017 Void After: December 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: not available -Rev. 12/1/2017- Void After: Product: Water Closets with Dual Flush Feature File No. 5645
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSuction fittings for use in swimming pools, wading pools, spas, hot tubs, and other aquatic facilities.
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July 2016 Void After: July Product: ABS-DWV Pipe and Fittings File No. 9266
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1149 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
More informationSubmittal Package. Viega MegaPress Fitting System. Chilled Water. Hydronic Heating. Fire Protection. Low Pressure Steam. Compressed Air (no oil)
Viega MegaPress Fitting System Chilled Water Hydronic Heating Fire Protection Low Pressure Steam Compressed Air (no oil) Industrial Gases Vacuum 1 of 11 Viega MegaPress Fitting System Viega MegaPress is
More informationCalifornia Lead Plumbing Law Devices and Components
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING.
ICC-ES Report PMG-1407 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationEffective Date: May Rev. 6/18/2018- Void After: May Product: Plumbing Fixture Fittings File No. 3489
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
More informationEVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS.
ICC-ES Report PMG-1171 Reissued 11/2018 This report is subject to renewal 11/2019 EVALUATION SUBJECT: UNDERGROUND SINGLE WALL & DOUBLE WALL INSULATED DUCT FOR HVAC DIRECT BURIAL APPLICATIONS AND UNDERGROUND
More informationEVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1256 Reissued 10/2017 This report is subject to renewal 06/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
More informationEffective Date: October Rev. 1/29/2018- Void After: October Product: Lead Free Plumbing Products File No. 6544
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July 2018 Void After: July Product: Plumbing Fixture Fittings File No. 4155
IAPMO Researh and Testing, In. is a produt ertifiation body whih tests and inspets samples taken from the supplier's stok or from the market or a ombination of both to verify ompliane to the requirements
More informationMATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE
MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE THINK GLOBALLY, ACT LOCALLY CONTENTS Propex DZR fittings and pex 2 Why depend on Propex hot and cold piping system 3 Cross linked polyethylene
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationSeries 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints
More informationOriginally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018
ITW BUILDING COMPONENTS GROUP INC. ITW ALPINE HANGERS AND ANCHORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION ITW Alpine Hangers and Anchors recognized in this report has
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationEffective Date: February Rev. 7/13/2018- Void After: February Product: Plumbing Fixtures (Stainless Steel) File No.
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationASSE International Product (Seal) Listing Program
ASSE International Product (Seal) Listing Program ASSE 1070-2015 / ASME A112.1070-2015 / CSA B125.70-15 Performance Requirements for Water Temperature Limiting Devices Manufacturer: Contact Person: E-mail:
More informationSpecification For Water Meters. Pr10068
Specification For Water Meters Pr10068 Documents Details This document is only valid on the day it was printed. Version Review Revision Date issued Reviewed by Approved by Date approved Revision type 0.1
More informationBSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: Developed for the sterile filtration of air and gases in compressed gas applications as well as venting applications. High dirt holding capacity at a low
More informationButtweld Fittings ANSI B16.9, ANSI B16.28, MSS-SP-43, MSS-SP-95, MSS-SP-97
uttweld Fittings NSI 16.9, NSI 16.28, SS-SP-43, SS-SP-95, SS-SP-97 90 LR ELOWS 45 LR ELOWS 180 LR ELOWS 90 SR ELOWS oncentric and eccentric reducers, equal and reducing tees, 45 and 90 elbows, buttweld
More informationForged Brass Bellows Valves
Forged Brass Bellows Valves Designed Specifically For High Purity Gas Service Size Range - 0.625" to 4.125" Outer Diameter Size Product Features: Forged Brass Bodies - No Sand Castings Clean Area Assembled
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationLOKRING Stainless Steel (SS40) and Carbon Steel (CS) Pipe Fittings Table of Contents
38376 APOLLO PARKWAY WILLOUGHBY, OHIO USA 44094 www.lokring.com LOKRING Stainless Steel (40) and Carbon Steel (CS) s Table of Contents Information Page 2.. Design Page 3-4.. Pressure and Temperature Ratings
More informationFlexible hoses - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0183 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More informationTOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
More informationTechnical Data. UL Listing is based on the following criteria:
Worldwide Contacts www.tyco-fire.com DV-5 Deluge Valve with Trim Inch and 6 Inch (DN and DN5) General Description The TYCO DV-5 Deluge Valve with Trim is a diaphragm-style valve that depends upon water
More informationGUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES
GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES ESYD G-DIAKRIB/01/01/26-03-2015 1/6 ESYD G-DIAKRIB Issue: 01 Revision: 01 Issue Date: 28-11-2007
More informationPresented to the IAPMO Standards Review Committee on March 7, 2016
Summary of Substantive Changes between the 2015 edition of ASSE 1070/ASME A112.1070/CSA B125.70, Water Temperature Limiting Devices, the 2004 edition of ASSE 1070, Water Temperature Limiting Devices, and
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationNominal size dim 63mm. Option with case dim 50 mm. Aluminium, white with black lettering
Ed.17.01 Application Industrial pressure gauge with liquid filling. Intented where pulsation or vibration exists. Suitable for media that will not attack copper alloy parts Design EN 837-1 Series Serie
More informationREVERSE OSMOSIS INSTALLATION Watermark 4 Stage
REVERSE OSMOSIS INSTALLATION Watermark 4 Stage BRIEF TECHNICAL ASPECT OF THE WATER TREATMENT SYSTEM The Filter Systems Australia Water Treatment System utilizes a process called reverse osmosis (RO). As
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationEPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
More informationHuat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
More informationSeries MG Mixing Tubes
Series MG Mixing Tubes Fuel gas / air mixers 30-60.8-1 Air/fuel gas mixing devices for use with all MAXON premix burner systems to provide thorough blending of air/gas mixture. Mixing tubes available for
More informationCold Press joint technology has been around for over a century.
Cold Press joint technology has been around for over a century. Since the first design was patented, there have been a number of important evolutionary modifications. The focus of these improvements have
More informationMIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationYORKEX HARD KUTERLON PLASTIC COATED. Wall 10mtr 25mtr
YORKSHIRE COPPER TUBE BS EN1057 YORKEX H/HARD YORKEX CHROME YORKEX HARD (T/X) PLATED O/D Press O/D Press O/D Press Wall Stock Lth 65C Wall Stock Lth 65C Wall Stock Lth 65C MM 3mtr 6mtr Bar MM 3mtr 6mtr
More informationa pilot sprinkler were to be closed after its initial operation, for example a remote manual control station).
Technical Services: Tel: (800) 8-9 / Fax: (800) 9-00 Model DV- Deluge Valve, Diaphragm Style, -/ thru 8 Inch (DN40 thru DN00), Deluge System Dry Pilot Actuation General Description The Model DV- Deluge
More informationTECHNICAL DATA OBSOLETE
April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,
More informationTECHNICAL DATA OBSOLETE
June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
More informationCode Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issue Date: 11-16-2009 Revision Date: 11-29-2018 Renewal Date: 11-18-2019 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications Marshall Stamping Company
More informationStainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com Top Line precision crafted Tube
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More informationType 1367 High-Pressure Instrument Supply System with Overpressure Protection
Instruction Manual D100343X012 Type 1367 November 2017 Type 1367 High-Pressure Instrument Supply System with Overpressure Protection TYPE 252 FILTER 2ND-STAGE TYPE 67CF FILTER-STYLE REGULATOR INLET TYPE
More informationPVC Push Fit System. No glue. No wait. Just push and go.
PVC Push Fit System No glue. No wait. Just push and go. Join the revolution. A technical leader for over 50 years, LASCO fittings are relied upon worldwide. Now with the launch of their revolutionary
More informationPrestolok PLS Stainless Steel Push-to-Connect Fittings
Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance
More informationEVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS
ICC-ES Report ESR-1681 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING
More informationCode Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issued: 11-16-2009 Renewal Due: 11-18-2018 Revised: 11-28-2017 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications MARSHALL STAMPING COMPANY 355 Glade Mills
More informationPiece Weight. List Price. Basket Strainer-Plastic. Wash Tray Plug. TIP TOE Tub Drain. Shower Drain Grids
PLUMBING SPECIALTIES PS_1018 EFFECTIVE OCTOBER 1, 2018 (SUPERCEDES PS_0918) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Bath Coupling Elbow 123-096
More informationI am transmitting to you herewith the following decision of the Standards Council.
August 8, 2006 Joseph Sternola Permagas, Inc. 2317 N. Machias Road Lake Stevens, WA 98258 Re: IAPMO Standards Council Decision TIA UPC-016-06 Decision Date: August 8, 2006** Uniform Plumbing Code Dear
More informationFlexible & Intelligent
Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility
More informationSHARKBITE. PEX Plumbing a Better Home
SHARKBITE PEX Plumbing a Better Home Benefits of SharkBite PEX PROUDLY AMERICAN MADE Health/Safety No glue, solder, or solvents required for the connection process, which keeps potentially dangerous chemicals
More informationSpeed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationWater Hammer Arrestors
Water Hammer rrestors watts.com What is Water Hammer? T he noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage
More informationHalsey Taylor Owners Manual
Halsey Taylor Owners Manual Wall Mount Steel Refrigerated Fountains INSTALLER These series fountains are among the easiest to install Fountains on the market today. To assure you install these models easily
More informationTECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
More informationCast Pressure Fittings
s Catalog LT-CP1018 Effective Date: October, 2018 CAST PRESSURE FITTINGS Sweat x FNPT Elbow Elbows 302-283 1/2 Sweat x FNPT Elbow 25/1 302-283NL 1/2 Sweat x FNPT Elbow 25/1 302-284 3/4 Sweat x FNPT Elbow
More informationINSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
More informationANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS
Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series
More informationDIVISION: 06--WOOD AND PLASTICS SECTION: Wood, Plastic and Composite Fastenings
DIVISION: 06--WOOD AND PLASTICS SECTION: 060523 -- Wood, Plastic and Composite Fastenings REPORT HOLDER: ITW BUILDING COMPONENTS GROUP, INC. 2400 LAKE ORANGE DRIVE, SUITE 150 ORLANDO, FLORIDA 32837 (800)
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationSIZING AND CAPACITIES OF GAS PIPING
SIZING AND CAPACITIES OF GAS PIPING A.1 General piping considerations. The first goal of determining the pipe sizing for a fuel gas piping system is to make sure that there is sufficient gas pressure at
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
More informationInstallation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationPipe Thread Connection 1/2 inch NPT. Friction Loss Refer to Figure 3
Worldwide Contacts www.tyco-fire.com Model B-1 Pipe Line Strainer General Description The Model B-1 Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply connection
More informationFlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number
3M Water Filtration Products FlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number 56123-06 Installer: Please leave this manual with owner/operator. End User: Please retain for
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8655-4 First edition 2002-09-15 Piston-operated volumetric apparatus Part 4: Dilutors Appareils volumétriques à piston Partie 4: Diluteurs Reference number ISO 8655-4:2002(E)
More informationtubepress press procedure
tubepress press procedure tubepress 15mm up to 35mm tubepress 15 mm up to 35 mm 1. The tube ends must be clean with no scratches or grooves. Remove end caps. Cut tube to length. 2. Deburr tube inside and
More informationMODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve) 1¼", 1½", 2", 2½", 76.1mm, 3", 4", 6",165.1mm, 8"
4077 Airpark Dr. Standish, MI 48658 989-846-4583 www.globesprinkler.com Technical Support 989-414-2600 techservice@globesprinkler.com MODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve)
More informationTECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY
Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationTECHNICAL DATA. Q= Cv S
Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationOriginally Issued: 10/08/2010 Revised: 10/30/2015 Valid Through: 10/31/2016
EVALUATION SUBJECT: ITW ALPINE HANGERS AND ANCHORS REPORT HOLDER: ITW Building Components Group Inc. 13825 W. Business Center Dr. Unit A Lake Forest, IL 60045 (800) 521-9790 www.alpineitw.com CSI Division:
More informationTECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13
Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More informationIAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints
IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing
More informationCompact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
More informationCOPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/
COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1
More informationLJ1-25 LouieJRtm Tapping Machine
1/21/08 WARNING: Before using this product, read owners manual and follow all Safety Rules and Operating Instructions. LJ1-25 LouieJRtm Tapping Machine OPERATIONS MANUAL & OPERATING INSTRUCTIONS 30230
More information