Phone: (86) Fax: (86)

Transcription

1 Professor, Ph.D Supervisor, Academician of CAE Shenyang Institute of Automation, Chinese Academy of Sciences Prof. has been with the Shenyang Institute of Automation (SIA), Chinese Academy of Sciences (CAS) since 1967, and had been the director of SIA from 1994 to He is currently the director of Academic Committee of SIA. He received his B.S. in Computer Science from Harbin Institute of Technology in Prof. WANG has been engaged in artificial intelligence and intelligent control, large-scale industrial automation system and engineering application, industrial robot key technology etc. His research has been continuously funded by both national basic and applied research agencies. Prof. WANG is one of the academic leaders in China s robot and automation engineering and technology field. During the period of being SIA director, Prof. WANG headed the establishment of Advanced Manufacturing Technology Research and Development Base, and organized the implementation of several national-level research program, gaining a series of technology achievements with self-owned intellectual property rights. In particular, he exhibited outstanding contributions in industrial robot key technology breakthrough and in promoting the industrialization of China s robot technologies. Prof. WANG took the lead to compose Advanced Manufacturing Technology in China: A Roadmap to 2050, and the strategy planning in Advanced Manufacturing of Innovation 2020 of CAS. His research work has received national recognition through winning several prestigious awards such as State Science and Technology Progress, National Young and Middle-aged Expert with Outstanding Contributions, Ho Leung Ho Lee Foundation Science and Technology Progress Award. Prof. WANG is very active in serving professional communities. He is the Editor-in-Chief of Information and Control, the General Chairman of Liaoning Association for Science and Technology, Deputy Director General of Chinese Association of Automation, Director General of Liaoning Association of Automation. He had been the member of expert committee in advanced manufacturing of National High-tech R&D Program (863 Program). Education B. S. Computer Science, Harbin Institute of Technology Harbin, Heilongjiang, P.R.China

2 Work Experience 1967~present, Shenyang Institute of Automation, Chinese Academy of Sciences 1982~1985, Visiting scholar, Artificial intelligence and robotics, Carnegie Mellon University 1994~2003, Director, Shenyang Institute of Automation, Chinese Academy of Sciences Awards and Honors Top Science and Technology Award in Liaoning Province Science and Technology Congress, 2006 State Science and Technology Progress Award Class II, 2002 CAS Science and Technology Progress Award Class I, 2001 State Science and Technology Progress Award Class II, 2000 CAS Science and Technology Progress Award (8times, Outstanding Award once in 1999) Ho Leung Ho Lee Foundation Science and Technology Progress Award, 2004 National Young and Middle-aged Expert with Outstanding Contributions Professional Services Editor-in-Chief, Information and Control 2012~present, Deputy Director General, Chinese Association of Automation 2003~present, Academician of Chinese Academy of Engineering 2002~present, General Chairman, Liaoning Association for Science and Technology 1997~present, Director General, Liaoning Association of Automation Representative Publications Journal Papers 1. J. Qi, D. Song, C. Wu, J. Han, and T. Wang, "KF-based adaptive UKF algorithm and its application for rotorcraft UAV actuator failure estimation," International Journal of Advanced Robotic Systems, vol. 9, D. Song, C. Wu, J. Qi, J. Han, and T. Wang, "A mit-based nonlinear adaptive set-membership filter for the ellipsoidal estimation of mobile robots' states," International Journal of Advanced Robotic Systems, vol. 9, J. Liu, J. Zhao, W. Liu, and T. Wang, "Gene chip microarray fluorescent spots images ccd scanning and acquiring system," Zhongguo Jiguang/Chinese Journal of Lasers, vol. 37, pp , Z. Wang, T. Wang, M. Yuan, and H. Wang, "Research on working condition recognition in cement rotary kiln using multifractal method," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 30, pp , Z. Wang, T.-R. Wang, M.-Z. Yuan, and H. Wang, "Dynamic model for simulation and control of cement rotary kilns," Xitong Fangzhen Xuebao / Journal of System Simulation, vol. 20, pp , H. Bian, W. Liu, T. Wang, and J. Zhao, "Support generation algorithm based on the vertical slice of STL model," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 28, pp , J. Wu, W. Liu, and T. Wang, "Error analysis for subdivision surfaces," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 43, pp , J. Wu, W. Liu, T. Wang, and J. Zhao, "Implicit surface reconstruction based on mean-shift," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 43, pp , J. H. Wu, W. J. Liu, T. R. Wang, and J. B. Zhao, "A fitting algorithm of subdivision surface from noising and dense triangular meshes," Ruanjian Xuebao/Journal of Software, vol. 18, pp , H. Bian, W. Liu, T. Wang, X. Shang, and K. Zhang, "Scanning mode for laser metal deposition shaping," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 42, pp , 2006.

3 11. Z. Wang, M. Z. Yuan, H. Wang, and T. R. Wang, "Studies on soft-sensor modeling for the quality index of cement clinker," Huagong Zidonghua Ji Yibiao/Control and Instruments in Chemical Industry, vol. 33, pp , J. Wu, W. Liu, and T. Wang, "Adaptive refinement scheme for triangular meshes," Jisuanji Gongcheng/Computer Engineering, vol. 32, pp , J. Wu, W. Liu, T. Wang, and H. Wang, "Estimating curvatures for point-sampled surfaces," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 27, pp , J. H. Wu, W. J. Liu, and T. R. Wang, "Adaptive refinements in subdivision surfaces based on mesh segmentation," Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 12, pp , Y. Zhou, H. Yu, and T. Wang, "Performance analysis and evaluation of control networks," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 27, pp , Y. Zhou, H. Yu, T. Wang, and C. Wu, "DSPN modeling and performance analysis of CSMA/CA communication for CAN," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 27, pp , H. Bian, W. Liu, T. Wang, and J. Zhao, "Selective-subarea offset-scanning path generating algorithm for stereolithography based on profiled outline convex decomposition," Gaojishu Tongxin/Chinese High Technology Letters, vol. 15, pp , X. Fan, Z. Wang, T. Wang, and Y. Sun, "Holistic method to enhance real-time communication for PROFIBUS," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 26, pp , X. Shang, W. Liu, T. Wang, and Z. Wang, "Scanning mode of the metal powder laser shaping," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 41, pp , Z. Wang, X. Shen, J. Chen, Y. Song, T. Wang, and Y. Sun, "Real-time performance evaluation of urgent aperiodic messages in FF communication and its improvement," Computer Standards and Interfaces, vol. 27, pp , J. Wu, W. Liu, and T. Wang, "Subdivision surf aces-based mesh refinement for rapid prototyping," Gaojishu Tongxin/Chinese High Technology Letters, vol. 15, pp , X. Wu, W. Liu, T. Wang, and P. Wen, "Heterogeneous material CAD part modeling under distance field definition," Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, vol. 17, pp , J. Zhang, W. Liu, and T. Wang, "Research on the small region data processing in rapid prototyping manufacture," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 41, pp , Y. Zhou, H. Yu, and T. Wang, "Deterministic and stochastic Petri net with test arc," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 26, pp , Y. Lu, H. Yu, T. Wang, and H. Wang, "Design and realization of foundation Fieldbus prediction function block," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 25, pp , X. Shang, W. Liu, T. Wang, and Z. Wang, "Research on coaxial powder-feed of laser engineered net shaping," Zhongguo Jixie Gongcheng/China Mechanical Engineering, vol. 15, pp , X. F. Shang, W. J. Liu, T. R. Wang, F. Y. Hu, and Y. L. Li, "Laser engineered net shaping technology," Journal of Shanghai University, vol. 8, pp , X. F. Wag, T. R. Wang, and Y. Zhao, "An effective top-down data mining method for long frequents," Jisuanji Yanjiu yu Fazhan/Computer Research and Development, vol. 41, pp , X. Wu, W. Liu, and T. Wang, "Heterogeneous material object modeling for 3D CAD part," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 40, pp , X. Wu, W. Liu, T. Wang, and P. Wen, "Modified polygonal mesh voxelization based on Euclidean distance measurement," Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, vol. 16, pp , X. J. Wu, W. J. Liu, and T. R. Wang, "Functionally graded material modeling based on 3D voxel models," Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 10, pp , 2004.

4 32. T. Wang, Y. Zhou, H. Yu, and M. Yuan, "Analysis and heuristic scheduling for real-time communication in FF system," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 24, pp. 1-1, J. Zhang, W. Liu, and T. Wang, "Research on adaptive slicing methods of three-dimensional solid models," Zhongguo Jixie Gongcheng/China Mechanical Engineering, vol. 14, pp , J. Zhang, W. Liu, and T. Wang, "Research on the connecting method for boundary compensating curves in rapid prototyping direct slicing," Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 39, pp , J. Y. Zhang, W. J. Liu, T. R. Wang, and X. F. Shang, "Determination of compensation direction for boundary curve in rapid prototyping direct slicing," Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 9, pp , G. Wang, S. Miao, T. Wang, and H. Yu, "Project selecting method with preference information in agile manufacturing," Zhongguo Jixie Gongcheng/China Mechanical Engineering, vol. 13, pp , T. R. Wang and D. K. Qu, "Open system architecture for control system for industrial robot," Jiqiren/Robot, vol. 24, pp , G. J. Wang, Z. J. Chang, T. R. Wang, and H. B. Yu, "Application of FCS in the industry of aluminum electrolysis," Jisuanji Gongcheng/Computer Engineering, vol. 27, pp , T. Wang, F. Zhu, H. Peng, S. Huang, J. Feng, and C. Shao, "Open system for mobile robot," Jiqiren/Robot, vol. 17, pp , Z. Wang, H. Yu, and T. Wang, "Stability condition of polling system with mixed serve," Xiaoxing Weixing Jisuanji Xitong/Mini-Micro Systems, vol. 21, pp , Z. Wang, H. B. Yu, T. R. Wang, and G. N. Song, "Modeling and analysis of fieldbus function block," Yiqi Yibiao Xuebao/Chinese Journal of Scientific Instrument, vol. 22, pp , Conference Papers 1. J. Liu, Y. Feng, W. Liu, and T. Wang, "A microarray image gridding method based on image projection difference sequences analysis and local extrema searching," in 10th World Congress on Intelligent Control and Automation, WCICA 2012, July 6, July 8, 2012, Beijing, China, 2012, pp H. Shi, M. Yuan, and T. Wang, "Design of biodiesel production processes by base-catalyzed transesterification," in 1st International Conference on Energy and Environmental Protection, ICEEP 2012, June 23, June 24, 2012, Hohhot, China, 2012, pp Y. Song, T. Wang, A. Xu, K. Wang, and Z. Yang, "CAN based unified customizable diagnostic measure research and realization," in 2012 UKACC International Conference on Control, CONTROL 2012, September 3, September 5, 2012, Cardiff, United kingdom, 2012, pp Y. Song, T. Wang, A. Xu, K. Wang, and Z. Yang, "Communication security problem and solution in safety-related system," in 2012 International Conference on Systems and Informatics, ICSAI 2012, May 19, May 20, 2012, Yantai, China, 2012, pp E. Gao, W. Liu, and T. Wang, "Interactive mesh segmentation based on graph Laplacian," in 2011 International Conference on Information Technology for Manufacturing Systems, ITMS 2011, May 7, May 8, 2011, Shanghai, China, 2011, pp J. Ma, Y. Zhu, and T. Wang, "An application of immune genetic algorithm for flexible job-shop scheduling problem," in 2010 International Conference on Computer Application and System Modeling, ICCASM 2010, October 22, October 24, 2010, Shanxi, Taiyuan, China, 2010, pp. V11461-V Y. Song, A. Xu, T. Wang, and H. He, "Study on voting safe function block and safety system," in 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010, August 13, August 15, 2010, Dalian, China, 2010, pp T. Wang, Z. Xing, P. Huang, G. Fu, and A. Ma, "An interconnect model for storage array on chip," in 2010 International Conference on Information, Networking and Automation, ICINA 2010, October 17, October 19, 2010, Kunming, China, 2010, pp. V1192-V L. Jun, W. Liu, and T. Wang, "Research and realization of algorithms for gene-chip PCR temperature-tracking control," in 9th International Conference on Electronic Measurement and

5 Instruments, ICEMI 2009, August 16, August 19, 2009, Beijing, China, 2009, pp A. D. Xu, Y. Song, H. B. Yu and T. R. Wang, Research On Improved Function Block Based Redundancy, in ICICTA: nd International Conference on Intelligent Computation Technology and Automation, vol. IV, Proceedings, 2009, pp Z. Wang, M. Yuan, B. Wang, H. Wang, and T. Wang, "Dynamic model of cement precalcination process," in 27th IASTED International Conference on Modelling, Identification, and Control, February 11, February 13, 2008, Innsbruck, Austria, J. Bai, C. Zang, T. Wang, and H. Yu, "A mobile agents-based real-time mechanism for wireless sensor network access on the Internet," in 2006 IEEE International Conference on Information Acquisition, ICIA 2006, August 20, August 23, 2006, Weihai, Shandong, China, 2006, pp F. Xing, W. Liu, and T. Wang, "Real-time sensing and control of metal powder laser forming," in 6th World Congress on Intelligent Control and Automation, WCICA 2006, June 21, June 23, 2006, Dalian, China, 2006, pp Y. Zhou, T. R. Wang and H. B. Yu, DSPN modeling and performance analysis of PROFIBUS," in WCICA 2006: Sixth World Congress on Intelligent Control and Automation, Vols 1-12, 2006, pp J. H. Wu, W. J. Liu and T. R. Wang, "Adaptive refinement scheme for subdivision surfaces based on triangular meshes," in International Conference on Computer-Aided Design and Computer Graphics-CAD GRAPHICS, 2005, pp Y. Zhou, H. B. Yu, and T. R. Wang, DSPN model and performance analysis of FF MAC sub-layer, " in International Conference on Mechanical Engineering and Mechanics, Vols 1-2, pp , Y. Lv, H.-B. Yu, T.-R. Wang, and Z. J. Yang, "Fieldbus interoperation technologies," in WCICA Fifth World Congress on Intelligent Control and Automation, Conference Proceedings, June 15, June 19, 2004, Hangzhou, China, 2004, pp Y. Zhou, H. B. Yu, T. R. Wang, Z. F. Wang, and C. D. Wu, "DSPN model and performance analysis of WorldFIP MAC sub-layer," in IECON th Annual Conference of IEEE Industrial Electronics Society, November 2, November 6, 2004, Busan, Korea, Republic of, 2004, pp X. F. Wang, J. Lu, and T. R. Wang, "Correlativity sets based theoretical frameworks of data mining," in 2003 International Conference on Machine Learning and Cybernetics, November 2, November 5, 2003, Xi'an, China, 2003, pp Z. Wang, S. Li, Y. Song, T. Wang, and Y. Sun, "Realtime Evaluation and Improvement of FF on Aperiodic Messages," in The 29th Annual Conference of the IEEE Industrial Electronics Society, November 2, November 6, 2003, Roanoke, VA, United states, 2003, pp X. Wu, W. Liu, and T. Wang, "Voxel-based model and its application in advanced manufacturing," in Fourth International Conference on Virtual Reality and Its Applications in Industry, October 23, October 25, 2003, Tianjin, China, 2004, pp H. Yin, Z. Wang, T. R. Wang, Y. Song, T. Fang, and Y. Sun, "Mean Cyclic Period of Polling Model with Double Classes of Objects in Each Queue," in The 29th Annual Conference of the IEEE Industrial Electronics Society, November 2, November 6, 2003, Roanoke, VA, United states, 2003, pp Y. Zhou, T. R. Wang, H. B. Yu, and M. Z. Yuan, "An optimizing heuristic algorithm for schedule table of FF system," in The 29th Annual Conference of the IEEE Industrial Electronics Society, November 2, November 6, 2003, Roanoke, VA, United states, 2003, pp X. J. Wu, W. J. Liu and T. R. Wang, "A new method on converting polygonal meshes to volumetric datasets," in 2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, vols 1-2, pp , X. F. Wang, T. R. Wang, and Y. Zhao, "An effective projection-reduction algorithm for mining long frequents," in Proceedings of 2002 International Conference on Machine Learning and Cybernetics, November 4, November 5, 2002, Beijing, China, 2002, pp Y. Zhou, Z. Wang, H. B. Yu, and T. R. Wang, "A new method to build the FF schedule time list," in New Technologies for Computer Control 2001, 2002, pp

6 27. Y. Zhou, M. Z. Yuan, T. R. Wang, and H. B. Yu, Periodic messages and function blocks scheduling in FF system, in 2001 International Conference on Info-Tech and Info-Net Proceedings, 2001, pp T. Wang, Z. Wang, H. Yu, Y. Zhou, and G. Song, "Wait time for multi-messages polling system under mixed service," in Proceedings of the 3th World Congress on Intelligent Control and Automation, June 28, July 2, 2000, Hefei, China, 2000, pp Z. Wang, T. Wang, M. Yuan, and H. Yu, "Research and implementation of fieldbus reliability," in Proceedings of the 3th World Congress on Intelligent Control and Automation, June 28, July 2, 2000, Hefei, China, 2000, pp