Disclosure to Promote the Right To Information

Transcription

1 इ टरन ट म नक Disclosure to Promote the Right To nformation Whereas the Parliament of ndia has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of ndian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. ज न1 क अ+धक र, ज 1 क अ+धक र Mazdoor Kisan Shakti Sangathan The Right to nformation, The Right to Live प0र 1 क छ ड न' 5 तरफ Jawaharlal Nehru Step Out From the Old to the New S (1983): Taper Male Stud Tee Body (Stud Run) for Oil-Hydraulic Couplings, Part : Made from Bar Stock [PGD 17: Fluid Power Fittings, Hoses and Hose Assemblies]! न $ एक न' भ रत क +नम-ण Satyanarayan Gangaram Pitroda nvent a New ndia Using Knowledge! न एक ऐस खज न > ज कभ च0र य नहB ज सकत ह ह Bhartṛhari Nītiśatakam Knowledge is such a treasure which cannot be stolen

2

3

4 U DC : : S : (Part ) tancard 4 %CCiF)catj~ jcct,o, ndian Standard 1 E3 SPECFCATON FOR UCKN*W~ER MALE STUD TEE BODY ( STUD RUN ) iprocal Exchan& %@R OL-HYDRAULC COUPLNGS *s ~inistfy of Railway> a ma.,.,, PART MADE FROM BAR STOCK 1. Scope - Specifies dimensions, material and other requirements for taper male stud tee bcdy (stud un) made from bar stock for use in oil-hydraulic system.!. Dimensions - Shall be as given in Table Material - Steel conforming to designation 14C14S14 of S : 1570 (Part ll)-1979 Schedules or wrought steels : Part Carbon and carbon manganese free cutting steels (first revision), or any ther steel as agreed to between the user and the manufacturer.!. Surface Protection - The taper male stud tee body (stud run) shall be phosphated to Class A2 of S : Phosphate treatment of iron and steel for protection against corrosion, unless otherwise agreed to between the user and the manufacturer. 5, General Requirements 5.1 These taper male stud tee bodies (stud run) are intended for assembly in accordance with Type A )f S : Stud run tee coupling assemblies for oil-hydraulic systems. 5.2 For details not covered in this standard, reference shall be made to S : 8805 (Part General requirements for ferrule type couplings used in oil-hydraulic systems : Part General. 6. Designation - A taper male stud tee body (stud run) of light series L for 6 mm outside diameter of tube and conforming to this standard shall be designated as: Stud Run Tee -Body L6 S : (Part ) 7. S Certification Marking - Details available with the ndian Standards nstitution. EXPLANATORY NOTE This standard covers taper male stud tee body made from bar stock only. The tee-bodies made from forging are covered in S : (Part )-1983 Taper male stud tee body (stud run) for oil-hydraulic couplings : Part Made from forgings. ln the preparation of this standard, assistance has been derived from the following standards: BS : 4368 Carbon and stainless steel compression couplings for tubes Part : 1972 Heavy series (metric) Part : 1974 Light series (metric). British Standards nstitution (BS) DN 3913 : 1966 Non-soldered taper-bush type pipe unions; L union used as an adaptor with taper thread on screwed-in-end for use with union nut. Deutsches lnstitut fiir Normung (DN). Adopted 28 Jmuary May 1983, S NDAN STANDARDS NSTTUTON MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG. NEW DELH HO002 Gr 1

5 S:10453 (Part ) TABLE 1 DMENSONS FOR TAPER MALE STUD TEE BODY (STUD RUN) MADE FROM BAR STOCK ( Clause 2 ) All dimensions in millimetres. NY t Series Outside Dia of Tube Dt d 8411 h% $3 a h: M8xl M 12x M 14x Light L M 16x1 5 M 18x M 22x M 26x M 14x M 16x Heavy H M 18x1 5 M 20x M 22x1 5 M 24x _ txrernar taper tnreaos contorming to S : Dimensions for pipe threads where pressure tight joints are required on the threads (secondrevision). TThreads on tube ends as per S : S0 metric screw threads class 6 g. 2 Primed at Printrade. New Delhi, ndia