ESS Vehicle Operations Goggle

Transcription

1 ESS Vehicle Operations Goggle The ESS Vehicle Operations Goggle with anti-reflective sleeve is commercially available protective eyewear that provides ballistic and UVA/UVB protection. The ESS Vehicle Ops goggle is designed for soldiers exposed to harsh environments while operating vehicles. The high-density, restricted perimeter filtration provides protection against airborne debris while traveling at high speeds. The ESS Vehicle Ops Goggle is used for vehicle operations involving excessive dust. The ESS Vehicle Operations Goggles do not have designated sizes, as one size fits all. The goggle consists of an injection molded rubber frame with polyurethane foam backing with a foam skin that contacts the face. The rubber frame holds the lens while the foam interface provides a seal between the face and goggle frame. Foam covered vent holes allow some ventilation while limiting dust infiltration. The clear and sunglass lenses are a single piece, simple curve, injection molded high impact polycarbonate design with anti-scratch and anti-fog coatings. The lens has a nominal thickness of 2.4 mm, provides ballistic-fragment protection, and meets US military MIL V-43511C ballistic impact requirements. An Anti-reflective sleeve is included to reduce glint when the goggle is not in use. Weight: Comparable to SWDG ~ 5.1 ounces. Size: One size fits all. Caution: The ESS Vehicle Operations Goggles do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black neoprene rubber, black elastic web strap. Ballistic Lens: 2.4mm thick polycarbonate lens (clear and sunglass). Storage Case. Anti-reflective Sleeve. Requisition Information Units may order the ESS Vehicle Operations Goggles with anti-reflective sleeve by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number: ESS01BK-MCSC. ESS Vehicle Operations Goggles Kit includes: frame, ballistic lenses (clear and smoke gray), storage case, and anti-reflective sleeve. Estimated Unit Cost: $ NSN: Part Number: EL1-50. ESS Vehicle Operations Goggles Clear-Ballistic Replacement Lens (pack of 50). Estimated Unit Cost: $ NSN: Part Number: EL2-50. ESS Vehicle Operations Goggles Smoke Gray-Ballistic Replacement Lens (pack of 50). Estimated Unit Cost: $

2 ESS Land Operations Goggle The ESS Land Operations Goggles with anti-reflective sleeve is commercially available protective eyewear for both prescription and non-prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The ESS Land Operations Goggles do not have designated sizes, as one size fits all. The goggle consists of an injection molded rubber frame with polyurethane foam backing with a foam skin that contacts the face. The rubber frame holds the lens while the foam interface provides a seal between the face and goggle frame. Foam covered vent holes allow some ventilation while keeping dust out. The clear and sunglass lenses are a single piece, simple curve, injection molded high impact polycarbonate design with anti-scratch and anti-fog coatings. The lens has a nominal thickness of 2.4 mm, provides ballistic-fragment protection, and meets US military MIL V-43511C ballistic impact requirements. An Anti-reflective sleeve is included to reduce glint when the goggle is not in use. Weight: Comparable to SWDG ~ 4.1 ounces. Size: One size fits all. CAUTION: The ESS Land Operations Goggles do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Olive Green neoprene rubber, black elastic web strap. Ballistic Lens: 2.4mm thick polycarbonate lens (clear and sunglass). Storage Case. Anti-reflective Sleeve. Units may order the ESS Land Operations Goggles with anti-reflective sleeve by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number: ESS01OV-MLSC. ESS Land Operations Goggles Kit includes: frame, ballistic lenses (clear and smoke gray), storage case, and anti-reflective sleeve. Estimated Unit Cost: $ NSN: Part Number: EL1-50. ESS Land Operations Clear-Ballistic Replacement Lens (pack of 50), Estimated Unit Cost: $ NSN: Part Number: EL2-50. ESS Land Operations Smoke Gray-Ballistic Replacement Lens (pack of 50). Estimated Unit Cost: $

3 ESS Profile NVG The ESS Profile NVG with anti-reflective sleeve is commercially available protective goggle for non-prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The ESS Profile NVG do not have designated sizes, as one size fits all. The goggle consists of an injection molded rubber frame. The rubber frame holds the lens. Foam covered vent holes allow ventilation while keeping dust out. The clear and sunglass lenses are a single piece, simple curve, injection molded high impact polycarbonate design with antiscratch and anti-fog coatings. The ESS goggle currently does not have an approved laser lens. The lens has a nominal thickness of 2.8 mm, provides ballistic-fragment protection, and meets all ANSI Z87.1 requirements and the MIL-V-43511C ballistic impact test. Clear and sunglass lenses offer 100% UVA/UVB protection and distortion-free optics. An Anti-reflective sleeve is included to reduce glint when the goggle is not in use. Weight: Comparable to SWDG ~ 4.1 ounces. Size: One size fits all. CAUTION: The ESS Profile NVG Goggles do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Neoprene rubber, green black, or tan; black elastic web strap. Ballistic Lens: 2.8mm thick polycarbonate lens (clear and sunglass). Storage Case. Anti-reflective sleeve. Units may order the ESS Profile NVG with anti-reflective sleeve by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number EP01BK1-TSB. ESS Profile NVG Goggles Kit (black) includes: frame, ballistic lenses (clear and sunglass), storage case, and anti-reflective sleeve. Estimated Unit Cost: $ NSN Part Number EP010D1-MSB. ESS Profile NVG Goggles (olive drab), includes: frame, ballistic lenses (clear and sunglass), storage case, and anti-reflective sleeve. Estimated Unit Cost: $ NSN Part Number EP01DT1-MSB. ESS Profile NVG Goggles (desert tan), includes: frame, ballistic lenses (clear and sunglass, storage case, and anti-reflective sleeve. Estimated Unit Cost: $ NSN Part Number: PR1C-50. ESS Profile NVG Goggles Clear-Ballistic Replacement Lens. Estimated Unit Cost: $8.80 per lens; $ per package of 50. NSN Part Number: PR1Y-50. ESS Profile NVG Goggles Smoke Gray-Ballistic Replacement Lens. Estimated Unit Cost: $8.80 per lens; $ per package of 50.

4 Arena FlakJak Goggle The Arena FlakJak Goggle is commercially available protective eyewear for both non-prescription lens wearers and prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The Arena Goggles do not have designated sizes, as one size fits all. The goggle consists of an injection molded rubber frame with ventilation screen, which allow air to flow through to minimize fogging of the lens. The rubber frame holds the lens. The clear and sunglass lenses are a single piece, simple curve, injection molded high impact polycarbonate design with anti-scratch and anti-fog coatings. The lens has provides ballistic-fragment protection, and meets all ANSI Z87.1 requirements and the MIL-V-43511C ballistic impact test. Clear and sunglass lenses offer 100% UVA/UVB protection and distortion-free optics. An Anti-reflective sleeve is included to reduce glint when the goggle is not in use. Size: One size fits all. Caution: The Arena Goggles do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Tan plastic/neoprene rubber. Ballistic Lens: Clear and sunglass. Elastic headband: tan elastic. Storage Case: Tan microfiber. Units may order the Arena Goggle and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I) or DSCP Prime Vendor Contract. NSN: Part Number: SSK-FLK-LF-GL-GP/DT. Arena Goggle Kit includes: frame (tan plastic/neoprene rubber), ballistic lenses (smoke gray and clear), carrying case, cleaning cloth, and retention strap. Estimated Unit Cost: $ NSN: Part Number: AR4-GL-001-NC/CA/B5. Arena Goggle Kit Clear-Ballistic Replacement Lens (Package of 50). Estimated Unit Cost: $ NSN: Part Number: AR4-GL-001-NC/SA/B5. Arena Goggle Kit Smoke Gray-Ballistic Replacement Lens (Package of 50),. Estimated Unit Cost: $ NSN: Part#: SSC-G-BAG/K. Pouch, Goggle/Universal/With One Lens Cloth-Carrier/Khaki. Estimated Unit Cost: $4.31. NSN: Part#: AR4-SA-001-NC/DT. Strap, FlakJak/Desert Tan. Estimated Unit Cost: $12.40.

5 Uvex XC Spectacle The Uvex XC protective eyewear is manufactured of a lightweight rigid thermoplastic frame combined with a soft elastomer material on the temple that provides comfort at contact points with the face. The frame features ratchet lens adjustment to complete the fitting system and provides extended wear comfort. The Uvex XC can accommodate an optional prescription insert if required. Using an interchangeable dual 9-base wrap-around polycarbonate lens, the Uvex XC protects the entire eye socket area with exceptional peripheral coverage and unobstructed vision. The Uvex XC has engineered a small ventilation space between the frame and lens that vents the eye socket area to help reduce moisture. All lenses have been treated with anti-fog coating to further reduce the level of moisture and control fogging. The lens has a nominal thickness that provides ballistic-fragment protection, and meets US military eyewear ballistic impact requirements and all ANSI Z safety requirements. Size: One size fits all. CAUTION: The Uvex XC do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Materials. Frame: Black thermoplastic. Ballistic Lens: Polycarbonate lens (clear and sunglass with antifog (AF) coating). Temple arms: Black thermoplastic/elastomer pads. Carrying Case: Black cordura nylon. Units may order the Uvex spectacles and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I) or DSCP Prime Vendor Contract. NSN Part Number S99-S3399-MIL. Uvex Spectacle Kit includes: frame with temple arms, ballistic lenses (clear and sunglass), carrying case, fog-repellant cloth, and snap-on neck leash. Estimated Unit Cost: $ NSN Part Number: S6950X. Uvex XC Spectacle Clear Replacement Lens, Antifog Coating, (Package of 10). Estimated Unit Cost: $ NSN Part Number: S6951X. Uvex XC Spectacle Gray Replacement Lens, Antifog Coating, (Package of 10). Estimated Unit Cost: $ NSN Part Number: S99-S3300X-MIL. Uvex XC Spectacle Clear Spectacle Assembly. Estimated Unit Cost: $5.28. NSN Part: Number: S99-S3301X-MIL. Uvex XC Spectacle Gray Assembly. Estimated Unit Cost: $6.72. NSN Part Number: S99-S491-MIL. Uvex XC Spectacle Replacement Carrying Case (Black). Estimated Unit Cost: $3.42. NSN Part Number: S3350. Uvex XC Spectacle Prescription Lens Carrier. Estimated Unit Cost: $13.43.

6 Body Specs PISTOL The Body Specs PISTOL is commercially available protective eyewear for non-prescription lens wearers. The PISTOL provides ballistic and UVA/UVB eye protection; has an adjustable nosepiece to provide some degree of custom fit; has an interchangeable lens system that provides ballistic fragment protection; has anti-fog/scratch resistant coatings; has a streamlined design to fit the face closely and tightly; and can be worn with an included elastic strap under the helmet. The PISTOL comes with 2 ballistic polycarbonate lenses (neutral slate/ clear). Each lens is 2.1mm thick and clear coated with anti-fog solution and scratch resistant coating. The PISTOL weighs 1.1 ounces. The lens has a nominal thickness that provides ballistic-fragment protection, and meets United States military eyewear ballistic impact requirements and all American National Standards Institute (ANSI) Z safety requirements. Size: One size fits all, with adjustable nosepiece. CAUTION: The Body Specs PISTOL do not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black PC Polycarbonate with temple arms. Ballistic Lens: 2.1 mm polycarbonate lens (clear and neutral slate (sunglass)). Elastic headband: Black adjustable elastic. Storage Case: Fitted with clip-on and 2 belt loops for personnel carry, lens storage compartment, & separate frame and headband storage. The case is constructed of a semi hard nylon. Units may order the Body Specs PISTOL and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number PISTOLS-PKG-BLACK. Body Specs PISTOL Kit includes: frame with temple arms, ballistic lenses (clear and sunglass), elastic headband, and storage case, Estimated Unit Cost: $ NSN Part Number P-1C. Body Specs PISTOL Clear Replacement Lens. Estimated Unit Cost: $7.50. NSN Part Number P-1G. Body Specs PISTOL Neutral slate Replacement Lens. Estimated Unit Cost: $7.50. NSN Part Number P-FH. Body Specs PISTOL Replacement Frame (included temples & strap). Estimated Unit Cost: $ NSN Part Number P-H. Body Specs PISTOL Replacement Elastic Strap. Estimated Unit Cost: $3.00. NSN Part Number PN. Body Specs PISTOL Replacement Nose Piece. Estimated Unit Cost: $3.00. NSN Part Number P-P. Body Specs PISTOL Replacement Case. Estimated Unit Cost: $4.00.

7 Oakley SI M Frame (Military) The Oakley M-Frame military design is compliant with all ANSI Z optical performance and protection requirements and MIL-PRF Vo ballistic requirements. The lens material blocks UVA, UVB, UVC and harmful blue light. The Oakley M-Frame military design is compatibility with PASGT, CVC and MICH helmets. The Oakley M Frame does not have designated sizes, as one size fits all. Expanded peripheral vision and enhanced protection is provided via lateral contouring. The lens geometry minimizes refraction and allows extended upper/lower/lateral viewing fields. The Oakley M Frame is of a lightweight design, 1.05 oz total weight. The three-point fit design minimizes the need for adjustment and improves comfort. Size: One size fits all. CAUTION: The Oakley M Frame do spectacles not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black. Ballistic Lens: Plutonite (Grey and Clear Strike). Storage Case: Microclear storage/cleaning bag and storage case. Units may order the Oakley M Frame and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number: Oakley M Frame Kit with includes: frame, ballistic lenses (clear strike and gray), and storage case, Estimated Unit Price: $ NSN Part Number: Oakley SI M Frame Strike Clear Replacement Lens. Estimated Unit Price: $ NSN Part Number: Oakley SI M Frame Strike Gray Replacement Lens. Estimated Unit Price: $ NSN Part Number: Oakley SI M Frame Replacement Storage Case. Estimated Unit Price: $ NSN Part Number: Oakley SI M Frame Micro Bags. Estimated Unit Price: $ (Bag of 5).

8 Revision Sawfly USA Military Eyewear System The Revision Sawfly USA Military Eyewear System provides ballistic and UVA/UVB/UVC eye protection in a sized spectacle (regular and large). The Sawfly is a single shield system that provides ballistic fragment protection; extensive field of view; maximum air ventilation; fits the face closely and comfortably; allows for easy shield interchangeability; can accommodate an optional prescription insert; has adjustable arms and retention strap for proper/secure fit; weighs only 1 ounce; and is DEET resistant. The frame, constructed from tough, high impact Nylon, is designed to allow maximum field of view for both sizes. For fitting the general populace: 80% prefer size regular size; 20% prefer large size. The spectacles meet military eyewear ballistic impact resistance requirements and ANSI Z87.1 safety requirements. The system comes with 2 polycarbonate lens shields (solar/clear). The interchangeable, 2.2 mm thick polycarbonate shields are optically correct, distortion free, have scratch-resistant coating on both sides, give 100% UVA/B/C protection, and lock securely into the frame. Size: Two sizes regular and large. CAUTION: The Revision Sawfly USA Military Eyewear System does not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: High-impact nylon frame with adjustable arms. Ballistic Shields: Polycarbonate shields with anti-scratch coating (1 each solar and clear). Elastic headband: Black elastic adjustable retention strap. Storage Case: Semi-rigid storage case holds extra shield. Pouch: Protective microfiber mitt doubles as a cleaning cloth. Units may order the Sawfly and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number: Sawfly USA Military Kit (size regular) includes: frame, ballistic lenses (clear and sunglass), elastic headband, storage case, and microfiber mitt. Estimated Unit Cost: $ NSN, Part Number: Sawfly USA Military Kit (size large) includes: frame, ballistic lenses (clear and sunglass), elastic headband, storage case, and microfiber mitt. Estimated Unit Cost: $ NSN Part Number: Clear Replacement Shield with Nosepiece (size regular), (Package of 10). Estimated Unit Cost: $ NSN Part Number: Clear Replacement Shield with Nosepiece (size large), (Package of 10). Estimated Unit Cost: $ NSN Part Number: Solar Replacement Shield with Nosepiece (size regular), (Package of 10). Estimated Unit Cost: $ NSN Part Number: Solar Replacement Shield with Nosepiece (size large), (Package of 10). Estimated Unit Cost: $ NSN Part Number: Retention Head Strap Replacement One size, (Package of 10). Estimated Unit Cost: $ NSN , Part Number: Prescription Carrier Insert for Sawfly specs, (Package of 10). Estimated Unit Cost: $115. NSN , Part Number: Anti-fog, Anti-static Lens Cleaning Spray 1 fluid ounce bottle, (Package of 10). Estimated Unit Cost: $24.00.

9 Wiley X PT-1 Spectacle The Wiley X PT-1 spectacle is a commercially available interchangeable, single shield design for eye protection. Lens meets and exceeds ANSI Z , ANS Z80.3 safety / optical standards. Lens provides U.V. protection. The PT-1 does not have designated sizes, as one size fits all. Lens has scratch resistant coatings for longer life. Lens can be interchanged based on time of day and environment. Frame provides a 90-degree wrap-back, eliminating tunnel vision. Clear, non-slip rubber nosepiece is adjustable. Neoprene rubber temple tips grip head and hold frame firmly balanced. Includes 2 sets, shatterproof polycarbonate lenses (smoke green, clear). Micro Fiber case is included for cleaning and storage. Size: One size fits all. CAUTION: The Wiley-X PT 1 spectacle do does not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black plastic/neoprene rubber, Clear, non-slip rubber nose piece. Ballistic Lens: 8 Base, 2.3mm thick shatterproof polycarbonate (clear and sunglass). Strap: Elastic. Storage Case: Black microfiber. Units may order the Sawfly and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN: Part Number: PT-1SC. Wiley X PT-1 Spectacle Kit includes: frame, lenses (clear and sunglass), elastic strap, and carrying case. Estimated Unit Cost: $ NSN: Part Number: PT-1C. Wiley X PT-1 Single Lens System (clear). Estimated Unit Cost: $ NSN: Part Number: PT-1S. Wiley X PT-1 Single Lens System (smoke green), Estimated Unit Cost: $

10 Wiley-X SG-1 Spectacle System The Wiley-X SG-1 Spectacle System is commercially available protective eyewear for nonprescription lens wearers. The eyewear provides ballistic and UVA/UVB eye protection. The Wiley-X SG-1 is a dual lens eyewear that uses a foam seal around each eye socket to prevent infiltration of wind and dust. The system provides two functions in one: converting from a spectacle to low profile goggle. The lenses provide ballistic fragment protection (clear and sunglass) and have anti-fog and scratch resistant coatings. "Ultra-Foam" seals the eye orbits. The temples disengage with a push of a button and can be replaced with a snap loaded adjustable elastic headband. The frame provides a 90-degree wrap-back. Size: One size fits all. Caution: The Wiley-X SG-1 System does not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black plastic/neoprene rubber. Ballistic Lens: 2.1 mm polycarbonate lens (clear and sunglass). Elastic headband: Black elastic. Temple arms: Black plastic/neoprene rubber. Storage Case: Black microfiber. Units may order the Wiley-X SG-1 and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN Part Number: SG-1. Wiley-X SG-1 Spectacle Kit includes: frame with temple arms, ballistic lenses (clear and sunglass), elastic headband, and storage case. Estimated Unit Cost: $ $ NSN Part Number: SG-1C. Clear-Ballistic Replacement Lens. Estimated Unit Cost: $ NSN Part Number: SG-1G. Green Smoke-Ballistic Replacement Lens. Estimated Unit Cost: $ NSN Part Number: SG-1F. Replacement Frame (included temples & strap). Estimated Unit Cost: $ NSN Part Number: SG-1E. Elastic Strap Replacement. Estimated Unit Cost: $8.46. NSN Part Number: SG-1T. Replacement Temples. Estimated Unit Cost: $8.45.

11 ESS ICE-2 Spectacle System The ESS ICE-2 spectacles are a lightweight (1.2 ounces) eye protection system that offers highballistic impact resistance, unrestricted field of view, and interchangeable lenses for effective eye protection in any light condition. A set of two 2.4mm high-impact polycarbonate lenses (clear and smoke gray) are provided with the system. The ICE-2 can accommodate an optional prescription insert if required. The prescription carrier for the ICE 2 has an adapter when will make it compatible with the ESS Profile NVG. The ESS ICE-2 spectacles have adjustable temples that can be made longer or shorter, and have malleable ear bends that custom fit to any user. The spectacles come with a carrying pouch with divided lens pockets, a belt loop and a clip attachment, fog repellent cloth, and a snap-on neck leash. The ESS ICE-2 modular design allows for quick interchange of all product components. Size: One size fits all. Caution: The ESS ICE-2 Spectacle System does not have an approved laser protection lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. Frame: Black plastic/neoprene rubber. Ballistic Lens. Elastic headband: Black elastic. Temple arms: Black plastic/neoprene rubber. Storage Case: Black microfiber. Units may order the ESS ICE-2 and/or replacement parts by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I). NSN: Part Number: ESSICE-2. Eye Safety Systems (ESS) Interchangeable Component Eyeshield (ICE) 2 Kit (smoke gray (sunglass) and clear lens), carrying case, fog repellent cloth, and snap-on neck leash. Estimated Unit Cost: $ NSN: Part Number: ESSICEL1-50. ESS ICE2 Clear Replacement Lens, (package of 50 each). Estimated Unit Cost: $ NSN: Part Number: ESSICEL2-50. ESS ICE2 Smoke Gray Replacement Lens, (package of 50 each). Estimated Unit Cost: $ NSN: Part Number: ESSICEKIT. ESS ICE2 Replacement Frame. Estimated Unit Cost: $7.35. NSN Part Number: 1ESSICECS. ESS ICE2 Replacement Carrying Pouch. Estimated Unit Cost: $6.84. NSN: Part Number: ESSFOG24. Replacement Fog Repellent Cloth, (package of 24 each). Estimated Unit Cost: $ NSN: Part Number: ESSLSH-24. ESS ICE2 Replacement Snap-on Neck Leash, (package of 24 each). Estimated Unit Cost: $ NSN: Part Number: EPPRSC-P. ESS ICE2 Prescription Insert. Estimated Unit Cost: $18.08.

12 REQUISITIONING POCS a. Procurement agent for commercial products using Prime Vendor Contract: DSCP Contracting Officer: Technical Buying Point of Contact: Ms. Diane Neff Ms. Shirley Jones / FAX: / DSN dneff@dscp.dla.mil Shirley.B.Jones@dla.mil Fax DSCP-IDA Defense Supply Center Philadelphia 700 Robbins Avenue Philadelphia, PA Website: b. Procurement agent for commercial products using long-term contract: Mr. Thomas Laskowski Defense Supply Center Philadelphia DSCP-IDAC 700 Robbins Avenue, Building 3D Philadelphia, PA Phone: FAX: thomas.laskowski@dla.mil c. Logistics Manager: Mr. Myron Pross Product Manager Clothing and Individual Equipment (Philadelphia) 700 Robbins Ave., P.O. Box Philadelphia, PA mpross@dscp.dla.mil Phone: DSN ( ) Technical POCS. For all protective eyewear listed, contact: Assistant Product Manager for Chemical Clothing and Protective Eyewear Ms. Sarah Morgan-Clyborne Product Manager Clothing and Individual Equipment ATTN: SFAE-SDR-CIE sarah.morgan-clyborne@peosoldier.army.mil Phone: (703) /FAX: (703) Mr. Harold Moody or Ms. Michelle Markey U.S. Army Research, Development and Engineering Command Army Soldier Systems Engineering Team (ASSET) ATTN: AMSRD-NSC-IP-A Kansas Street, Natick, MA harold.moody@natick.army.mil/phone: DSN ( ) michelle.markey@natick.army.mil/phone: DSN ( )