Not to Scale 650mm 152mm 100mm gap RacingSparrow RG65 v1.0 Based on the 75cm boat in the book Build Your Own Radio Controlled Yacht this RG65 design a
|
|
- Corey Montgomery
- 6 years ago
- Views:
Transcription
1 Designer:Bryn Heveldt. VERSION v1.0 Not to Scale 1100mm would be this high as per the maximum height in the class rules. RacingSparrow RG65 VERSION v1.0 The rig stands at 942mm off the deck. You could consider this a B-rig as the class rules permit a mast that is 1100mm from the deck. With a maximum sail area of 2250 cm2. This boat is designed for heavy wind sailing, this gives it a wide range of conditions with one set of sails. Different sized rigs can be added by the individual who wants to take it a step further, which is encouraged by the designer. 180 mm 942 mm The hull must be 650mm or shorter. The hull must have a bowbumper for racing. These plans should produce a race ready boat. For detailed measurement rules and information visit: Note: these plans are very new and untested, at your own risk. But it should be sweet! and sail like a rocket. cheers. Bryn. 98 mm 210 mm Mast 942mm x 7mm diameter. 210 mm Spreader 75mm 75mm Lead Bulb g range.
2 Not to Scale 650mm 152mm 100mm gap RacingSparrow RG65 v1.0 Based on the 75cm boat in the book Build Your Own Radio Controlled Yacht this RG65 design allows the scratch builder to follow the books instructions to build a 65cm version that fits within the RG65 association rules mm 172mm To get more info or buy the book goto: Lead Bulb g range.
3 180 mm Boat Design: RacingSparrow RG65 Designer:Bryn Heveldt. VERSION v1.0 Not to Scale 1100mm would be this high as per the maximum height in the class rules. RacingSparrow RG65 VERSION v mm This is the swing rig setup. For detailed measurement rules and information visit: Lead Bulb g range.
4 Not to Scale 650mm Mast Tube 152mm 100mm gap 172mm Swing Rig Option. Has no stays, simply a carbon or plastic tube fibreglassed to the bulkhead. Several layers of glass, it needs to be very strong. 240mm Lead Bulb 675g
5 Comparison: RS750 / RS-RG65 Designer:Bryn Heveldt. Not to Scale Comparison RacingSparrow RS750 RacingSparrow RG65 RacingSparrow RG65 VERSION v1.0 *Same width(beam) *Same depth *Similar keel depths *No sloped back (transom) *Fuller bow sections *Mast stepped further back *Side stays further back and closer to the gunnels, glued to bulkhead - no need for half bulkhead C2. *bulb weight not tested. this is a trial design. Tuesday 17 November mm gap 1200g-1300g This faint pink line indicates the difference in hull shapes. I ve scaled the 65 up to 75 and overlayed the outlines. You can see there s more buoyancy in the front and the back. The keel and mast step back a cm or so. The 65 s rudder would also be a bit longer than a 750 to scale. This allows for the similar electrics layout as in the book, simply change measurements hatch positions need to change. These plans show the option to have conventional wire stays or a swinging rig supported by a tube in the hull. Lead Bulb g
6 Scale 1:1 When these plans are printed the box around this text should measure 100x20mm. If it doesn t try altering the print settings and scale the printing to 102% for example. Nose Bulkhead A2 Bulkhead C Bulkhead B Lead Bulb g
7 Scale 1:1 When these plans are printed the box around this text should measure 100x20mm. If it doesn t try altering the print settings and scale the printing to 102% for example. Bulkhead G Bulkhead E Bulkhead D Bulkhead F
8 Scale 1:1 When these plans are printed the box around this text should measure 100x20mm. If it doesn t try altering the print settings and scale the printing to 102% for example. C B A CD DE The red lines show a secondary set of bulkheads. These go between each of the main bulkheads. The lettering system is quite straight forward. The extra bulkheads are not required for the build but will help you create a more accurate planked hull. Once the boat is fibreglassed any excess bulkheads can be removed to lighten the hull. BC AB D E G FG F EF E
9 Scale 1:1 When these plans are printed the box around this text should measure 100x20mm. If it doesn t try altering the print settings and scale the printing to 102% for example. BC CD AB
10 Scale 1:1 When these plans are printed the box around this text should measure 100x20mm. If it doesn t try altering the print settings and scale the printing to 102% for example. EF FG DE
Apsara Hard chine version
Apsara Hard chine version Update of the RG65WIKI page. Introduction One often encounter people on forums looking for simple to build hard chine hulls. The RG65 class is ideal for initiation to remote controlled
More informationRADIO CONTROL MODEL YACHT BUDGIE ONE DESIGN CLASS CLASS RULES
1 RADIO CONTROL MODEL YACHT BUDGIE ONE DESIGN CLASS CLASS RULES 1. INTRODUCTION 2. BUDGIE CLASS SPECIFICATION 3. CLASS PHILOSOPHY 4. HULL AND DECK 5. KEEL / BULB AND RUDDER 6. DECK FITTINGS 7. SPARS AND
More informationLITTLE TRI construction
LITTLE TRI construction I have built almost anything that can sail. At the age of 12 my first sail thing, an ice boat. I used skates which had to be mounted on shoes as runners. Big fun, very fast, only
More informationStevenson Projects Building the Hull Top Deck and Bulkheads
Stevenson Projects Building the Hull 1. Print out both piece sheets. 2. Cut out one keel piece and glue it to a piece of balsa wood or dense cardboard. Cut out the second keel piece and glue it to the
More informationDRAGONFLITE 95 RESTRICTED CLASS RULES 2016
DragonFlite Force 95, Restricted Class Rules 2016 2013 Version 1.0 DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 Version 1.0 DF Racing Rules Committee 2016 Introduction The DragonFlite 95 (DF95) project started
More informationConstruction Chapters Index
Construction Chapters Index 9 7 8 Chapters Index c. c. c. c. c. c. c7. c8. c9. c0. c. c. c. c. c. c. c7. Balsa Wood Skeleton Strip Planking Hull Fairing Keel Bulb Mould Lead Bulb Casting Keel Construction
More informationCR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
More informationCONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill
CONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill The Gunboat design is the latest Radio A class from Graham Bantock, optimised to provide the best boat speed below 4 knots and to be as good as possible
More informationINDEX CLASS RULES. ISSUED 3 - June 2007 ONE POINT FIVE CLASS RULES
CLASS RULES INDEX 1. INTRODUCTION 2: 1.5 CLASS SPECIFICATIONS 3: CLASS PHILOSOPH 4: HULL AND DECK 5: KEEL / BULB AND RUDDE 6: DECK FITTINGS 7: SPARS AND RIGGING 8: SAILS ISSUED 3 - June 2007 ONE POINT
More informationAUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for
More informationMiniOpti Optimist RC Dinghy CLASS RULES
MiniOpti Optimist RC Dinghy CLASS RULES 1. GENERAL - CLASS The Mini-Optimist as in the full sized Optimist Dinghy class is a One-Design Class. The objective being that the sailing skills of the skipper
More informationODOM CLASS SPECIFICATIONS
ODOM CLASS SPECIFICATIONS Effective March 1, 2004 1. GENERAL 1.1 Purpose of the Measurement Rules 1.1.1 The ODOM is a One-Design Class as defined by the American Model Yachting Association (AMYA). However,
More informationVALDIVIA BUILD LOG Dr Ron
VALDIVIA BUILD LOG Dr Ron The Robbe kit of the two-masted schooner Valdivia was purchased in 2007, along with the fitting set and propulsion accessories, and has been staring me in the face since then
More informationNo.5550 INTRUCTION MANUAL WARRANTY WARNING. Notice This is not a toy. Assembly and operating of this boat requires adult supervision.
INTRUCTION MANUAL WARRANTY Thunder Tiger guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under warrant will in no case exceed the cost of the
More informationMARIA HF31. SCALE: 1/72 Length: 365 mm width: 85mm height: 295 mm
MARIA HF31 SCALE: 1/72 Length: 365 mm width: 85mm height: 295 mm HISTORY: Maria HF 31 is a fishing Ewer whose home base was Finkenwerder in northern Germany. Maria HF31 operated in the North Sea for more
More informationINTERNATIONAL 420 CLASS MEASUREMENT FORM & MEASUREMENT CERTIFICATE
INTERNATIONAL 420 CLASS MEASUREMENT FORM & MEASUREMENT CERTIFICATE BOAT DETAILS NATIONAL LETTERS OFFICIAL SAIL NUMBER FIRST OWNER OF HULL RE-REGISTRATION (if change of Nationality) Authority: International
More informationThe USA Canterbury J. Class Rules
Canterbury J Class Owners Association The USA Canterbury J Class Rules 2010 As Accepted 2008 and Revised February 2010 Published March 2010 The Canterbury J Class Rules ~ 2008 Page 1 of 10 THE CANTERBURY
More informationIn each step, the needed parts are shown the number right below. Locate all parts for the step.
Tools Required for Assembly Phillips Screwdriver, Med Needle Nose Pliers Sandpaper (#400 grit) Hobby Knife Scissors CA Instant Glue Rubbing Alcohol Drill Bit 1/16", 1.6mm 5/64, 2mm 1/8, 3mm 5/32, 4mm Before
More informationINTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM
INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM 2014 Authority: * International Sailing Federation, Ariadne House, Town Quay, Southampton, Hampshire, SO14 2AQ, UK IN ORDER TO OBTAIN A MEASUREMENT CERTIFICATE
More informationCLASS RULES OF THE AUSTRALIAN 13FT SKIFF
CLASS RULES OF THE AUSTRALIAN 13FT SKIFF TABLE OF CONTENTS 1. THE OBJECTS OF THE RULES... 2 2. RULES TO BE FOLLOWED WHEN BUILDING A SKIFF... 2 3. THE HULL... 3 4. CENTREBOARDS AND RUDDERS...3 5. WEIGHT...
More informationO K D I A MEASUREMENT FORM INTERNATIONAL OK DINGHY CLASS
O K D I A 2010 MEASUREMENT FORM INTERNATIONAL OK DINGHY CLASS NOTES GENERAL 1. The builder shall pay the current building fee to the National OK Dinghy Association which shall issue a building fee receipt
More informationGREEK TRIREME, 480 B.C. Scale: 1/72 Length: 515mm Width: 180mm Height: 220mm
GREEK TRIREME, 480 B.C. Scale: 1/72 Length: 515mm Width: 180mm Height: 220mm HISTORY: The model represents a Greek Trireme from the age of battle of Salamis (480 B.C.). The crew were 170 oarsmen and about
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2011 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More informationVikings ship GOKSTAD, 9 th century Scale: 1/72 Length: 305mm Width: 135mm Height: 182mm
Vikings ship GOKSTAD, 9 th century Scale: 1/72 Length: 305mm Width: 135mm Height: 182mm HISTORY: This model represents a Viking ship found in year 1880 near village Gokstad in Norway. The ship was built
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2013 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More informationDRAGONFLITE 95 RESTRICTED CLASS RULES 2016
DragonFlite Force 95, Restricted Class Rules 2016 2013 Version 1.2 1.0 DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 Version 1.2 DF Racing Rules Committee 2016 Introduction The DragonFlite 95 (DF95) project
More informationMeasurement Rules RG-65 CLASS
Measurement Rules RG-65 CLASS 2014 MEASUREMENT RULES RG-65 CLASS The RG-65 is a Radio Controlled monohull development class, where all isn t prohibited in these rules of measurement is allowed. MEASUREMENT
More informationClubSwan 50 the revolution is here
ClubSwan 50 ClubSwan 50 the revolution is here Nautor s Swan has always offered high performance racing yachts to complement its classic range of cruising Swans, yachts such as the 39, the 441 in Racing
More informationIntroduction. low deck spinnaker launching and retrieval system for quick and easy sail handling to allow the real focus to be on sailing.
Introduction The Farr 280 One Design is a new production racing sailboat by Farr Yacht Design that will deliver the excitement of grand prix racing to the under-30 one design arena. As a modern one design,
More informationWATER-FREE IOM MEASUREMENT IOMICA, 2005 March 4
WATER-FREE IOM MEASUREMENT IOMICA, 2005 March 4 The IOM has grown to become the most broadly accepted radio sailing class worldwide. To a large degree that success can be attributed to a strong set of
More informationA Basic Guide to Europe Dinghy Rigging
The Basics: A Basic Guide to Europe Dinghy Rigging Use the smallest blocks available for the line size. Most of the blocks on your boat will be micro blocks. Examine all of your rigging and ensure that
More informationSupernova Class Rules
Supernova Class Rules 1. Introduction 1.1. The Supernova is a strict One-Design hull single-handed hiking dinghy designed by Mark Giles to promote close competitive racing. It was designed using the fundamental
More informationStar 45 Short Kit Build by Bob Szczepanski
Star 45 Short Kit Build by Bob Szczepanski An old used Star 45 showed up at our pond one day last Fall. Nostalgia struck and I was hooked! A flood of memories sailing an International Star boat on Lake
More informationCATBOX. A Puddle Duck Racer. By Jim Michalak
CATBOX A Puddle Duck Racer By Jim Michalak CAT BOX HULL SPECIFICATIONS 1. Bow transom from 1/4" plywood. Top and bottom edges framed with 3/4 x 1-1/2" lumber with bevels as shown. Mark centerlines boldly.
More informationSealing kit manual. For sealing of conventional mast sections C156-C304 and furling mast sections F176-F305. Comes with sealing kit
597-182-E 2015-01-16 Sealing kit manual For sealing of conventional mast sections C156-C304 and furling mast sections F176-F305. Comes with sealing kit 312-322-10 2 1. General information This sealing
More informationMelges 24 Measurement Handbook. Provided by the United States Melges 24 Class Association
Melges 24 Measurement Handbook Provided by the United States Melges 24 Class Association Table of Contents Page Introduction 3 Illustration 1 Deck Layout 4 Illustration 2 Measurement Data Points 5 Illustration
More informationGS 48 Performance $955,000
GS 48 Performance $955,000 Specifications Boat Details Price $955,000 Boat Brand Grand Soleil Model 48 Performance Length 0.00 Year 2018 Category Sail Hull Style Single Hull Type GRP Power Type Sail Stock
More information1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
More informationConstitution Instructions
Constitution Instructions This kit will build a 1:48 scale hull for the USS Constitution frigate. The kit contains the following parts. 1/8 deck with laser etched deck lines 1/8 railing Ribs Center keel
More informationMake Model Length Price Year Condition. Beneteau First m EUR 14, Used. Boat Name Hull Material Draft Number of Engines Fuel Type
Beneteau First 30 Make Model Length Price Year Condition Beneteau First 30 8.9 m EUR 14,950 1980 Used Boat Name Hull Material Draft Number of Engines Fuel Type KayJay Fibreglass (GRP) 1.67 m 1 Diesel This
More informationMaintenance. Since your boat has a relatively high building number, you probably have some small interior changes to the old standard:
Maintenance You were asking for tips of maintenance. The boat was made from the best materials available in those days, and you may find the boat being in a remarkable good condition after all these years.
More informationStep 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the seam joint is.
WhiplashGV Instruction Manual Email: Brian@Blazermarine.com Phone: 513-598-1769 Step 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the
More informationD. N. HYLAN & ASSOCIATES, INC. BOATBUILDERS COQUINA STUDY PLANS
D. N. HYLAN & ASSOCIATES, INC. BOATBUILDERS COQUINA STUDY PLANS LOA - 6' " BEAM - 6" DRAFT, " board up, 36" board down WEIGHT - with rig, 50 lb HULL TYPE - round bottom lapstrake CONSTRUCTION - glued lapstrake
More informationMeasurements and repeat of website info on using RSS made sails for boats other than the intended
Measurements and repeat of website info on using RSS made sails for boats other than the intended Weight and type of boat. These sails are the correct weight cloth for trailer boats held up by the weight
More informationSCORPION CLASS RULES 2010
NATIONAL SCORPION CLASS RULES 2010 The Scorpion was designed in 1960 by Taprell Dorling and was adopted as a/recognised class in 1967. INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2
More informationLOA: 2,39m Beam: 1,17m
D5 LOA: 2,39m Beam: 1,17m Large scale plans for this boat can be purchased online from bateau.com The large scale version is printed on B and E size paper and includes full size patterns for the frames
More information"Queenie" - Tofinou 9.5
"Queenie" - Tofinou 9.5 Location Ipswich, United Kingdom Build Dimensions Price: 65,000 Length: 9.5m / 31.17ft Year: 2004 Beam: 2.45 meter Builder: Latitude 46 Max Draft: 2.2 meter Construction: GRP Keel
More informationOK DINGHY INTERNATIONAL ASSOCIATION. MANUAL OF MEASUREMENT Revised Apr 2009
OK DINGHY INTERNATIONAL ASSOCIATION MANUAL OF MEASUREMENT Revised Apr 2009 1. GENERAL This manual should be read in conjunction with the racing rules of sailing 2009-2012, the current class rules and measurement
More informationCOMET CLASS MEASUREMENT RULES
COMET CLASS MEASUREMENT RULES 1. INTENTION & INTERPRETATION. a. The intention of the Class Rules shall be to maintain a one-design class in which racing is a true test of sailing skill. The boats shall
More informationLooking aft from the forward bunk
STUDY PLANS 2 3 4 Looking aft from the forward bunk Looking aft from saloon 5 Looking forward from the galley Cockpit area 6 Specifications: LOA BOA Draft Displacement Headroom Mast Height Sail Area Main
More informationGS 48 Race. Specifications $995,000. Boat Details
GS 48 Race $995,000 Specifications Boat Details Price $995,000 Boat Brand Grand Soleil Model 48 Race Length 14.90 Year 2018 Category Racing Yachts Hull Style Single Hull Type GRP Power Type Sail Stock
More informationPHIGIT CLASS RULES 2006 V1.2
PHIGIT CLASS RULES 2006 V1.2 The Phigit class was developed by Charles Détriché, Graham Bantock, and Lester Gilbert in 2006 with the support of Marine Modelling International under the editorship of Chris
More information1/10 th Scale 1956 Ted Jones Classic Hydroplane
1/10 th Scale 1956 Ted Jones Classic Hydroplane Preparation These plans show outside sheeting of 3/32 balsa laminated with 1/64 birch ply. This makes a light and strong skin for this boat. Optionally you
More informationHansa COG 14 th century SCALE: 1/72 Length: 430mm Width: 210mm Height: 330mm
Hansa COG 14 th century SCALE: 1/72 Length: 430mm Width: 210mm Height: 330mm HISTORY: The Hansa was a medieval association of German cities which engaged by in long distance business mainly in area of
More informationRobotic Yacht. The construction of Birdy II. Paul
Robotic Yacht The construction of Birdy II Paul Table of Contents Introduction... 3 Construction... 4 Superstructure... 4 Birdy II... 5 Building Frame... 6 Bulkheads... 7 Drawing the Waterline... 7 Keel
More informationINSTALLING YOUR CLC RUDDER
INSTALLING YOUR CLC RUDDER These instructions are written to help you install the CLC rudder kit on your wooden kayak. The rudder can be fitted to your boat during construction or after completion. Please
More informationPRESS PACK n. 1 January 2010
PRESS PACK n. 1 January 2010 The KIWI 40FC the birth of an iconic yacht In 2004 the first of a new breed of 40 foot yachts was launched in France. Fast and capable offshore, it could be raced hard or cruised
More informationKNARR. SCALE: 1/35 length: 440mm width: 300mm height: 400mm
KNARR SCALE: 1/35 length: 440mm width: 300mm height: 400mm HISTORY: The Knarr is a type of Viking ship which serves for long trade naval business. The Knarrs were very robust and very well resist against
More informationThe Hartley TS21 is a one-design trailer yacht designed by the late Richard Hartley for both limited club racing and cruising.
Listed here are the Class Rules and Measurement Guidelines for the Hartley TS21 Trailerable Yacht, as adopted by the committee of the Hartley TS1 8-21 Yacht Club Inc. on 15 th October 2008 as amended on
More informationTugster. Tug Boat. Competition or Sport Tug Kit. A Zippkits R/C Boat. Building Instructions
Z I P P M A N U FA C T U R I N G Tugster Tug Boat Competition or Sport Tug Kit A Zippkits R/C Boat Building Instructions 2016 JMP Hobby Group St. Paul, Indiana 47272 www.zippkits.com Toll Free (866) 922-ZIPP
More informationBuilding a model of a Thames Barge
Building a model of a Thames Barge Stage 1 : Reading the instructions The model which I purchased is of the Will Everard, a steel-hulled barge built in the 1920's, one of a range of laser-cut kits from
More informationRules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION
MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2018 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that in exterior Hull form, hull weight, Sail plan and Spars,
More informationModel Maritime News. July 2009 Page 1 of 5
Page 1 of 5 NEW CARD SHIP MODELS We have bought in some more card models from Europe to compliment the new Sydney Ferry models featured recently in our newsletter. As we are aware that this type of modelling
More informationHANSA 2.3 CLASS RULES. Effective from April The Hansa 2.3 was designed in 1992 by Chris Mitchell
HANSA 2.3 CLASS RULES Effective from April 2016 The Hansa 2.3 was designed in 1992 by Chris Mitchell INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities...
More informationAPPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METER SAILING CANOE
APPENDIX IV Development Canoe Rules APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METER SAILING CANOE 1 GENERAL Class and measurement rules measurement forms may be obtained
More informationMaking Spars for the Schooner Jeanette
Making Spars for the Schooner Jeanette..... by Byron Rosenbaum Figure 1. Byron Rosenbaum s 1:16-scale radio-controlled model of the schooner Jeanette. All photographs by the builder. The spars required
More informationBoat Strength Errata & Updates 5/7/18 Sheet 1 of 5
Boat Strength Errata & Updates 5/7/18 Sheet 1 of 5 Formulas 1-2 and 1-3, page 7: Instead of averaging LOA and LWL and when LOA is more than 108% and instead of averaging BOA and BWL when BOA is over 112%,
More informationSanibel Owners Manual
Sanibel 36-600 Owners Manual TM Specifications Length (Hull):... 36 inches Height (Mast):... 51.5 inches Height (Overall):... 69 inches Beam:... 7.5 inches Radio: JR Beat Gear w/sail winch servo Sail area:
More informationEuromodel Falmouth Part 5 SHIP S BOAT - v.03. An interpretive build of the. SHIP S BOAT.05.v.03
TRANSLATION LINKS 1. type into your browser... english+italian+glossary+nautical terms 2. utilise the translation dictionary Nautical Terms & Expressions from Euromodel website An interpretive build of
More informationHANSA 303 CLASS RULES. Effective from April The Hansa 303 was designed in 1998 by Chris Mitchell
HANSA 303 CLASS RULES Effective from April 2016 The Hansa 303 was designed in 1998 by Chris Mitchell INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities...
More informationSONATA YACHT ASSOCIATION OF VICTORIA INC. P.O. Box 6010, M.D.C. Doncaster, Victoria 3108
1 SCOPE SONATA YACHT ASSOCIATION OF VICTORIA INC. P.O. Box 6010, M.D.C. Doncaster, Victoria 3108 A.A. Registration No. A00107436 Visit us at www.sonatayacht.com SONATA CLASS RULES AND RESTRICTIONS These
More informationHat s off to you for choosing a kit from Port Townsend Watercraft.
Hat s off to you for choosing a kit from Port Townsend Watercraft. 1 A 30 year fascination with the challenges of nesting boat design, and many prototypes have led to the PT Eleven. Because you chose this
More informationNEW ZEALAND EC12 ONE-DESIGN CLASS RULES
12 NEW ZEALAND EC12 ONE-DESIGN CLASS RULES NZ EC12 2010 NEW ZEALAND EC12 ONE DESIGN CLASS CLASS RULES 2010 (March) Authority: New Zealand EC12 Owners Association Inc. TABLE OF CONTENTS 1.0 GENERAL 1.1
More information8-GUN CORVETTE ASSEMBLY INSTRUCTIONS
8-GUN CORVETTE ASSEMBLY INSTRUCTIONS THE HULL STEP 1 Fasten the Deck to the Hull. Find the hull. This is a large, pink, ship-shaped piece of insulating foam board. This will form the base of your model
More informationKey Stage 2 - Design and Technology Project.
Key Stage 2 - Design and Technology Project. Name - Class - AT THE BOAT SHOW Learning Objectives: To know that boats are designed for different purposes. To evaluate boats and identify features that can
More informationNEW ZEALAND EC12 ONE-DESIGN CLASS RULES
12 NEW ZEALAND EC12 ONE-DESIGN CLASS RULES NZ EC12 2014 NEW ZEALAND EC12 ONE DESIGN CLASS CLASS RULES 2014 (February) Authority: New Zealand EC12 Owners Association Inc. Table of Contents INTRODUCTION
More informationNew York Yacht Club One-Design
NYYC One-Design New York Yacht Club One-Design Request for Proposal Presentation May 7 th, 2005 New York Yacht Club Harbour Court Table of Contents 1. RFP Requirements 2. The IRC Rule 3. IRC Research and
More informationK-designs PELICAN STUDY PLANS. Bernd Kohler. K-designs, Bernd Kohler 7 Rue de la Serre Maisons, France phone:
K-designs PELICAN STUDY PLANS by Bernd Kohler K-designs, Bernd Kohler 7 Rue de la Serre 11330 Maisons, France phone: + 33 468450803 1 K-designs Dear Customer Thank you for your interest on our Pelican
More informationBALTIC 175 PINK GIN VI A 6 th good reason to celebrate our 40 th Anniversary
BALTIC 175 PINK GIN VI A 6 th good reason to celebrate our 40 th Anniversary It s a great pleasure for us to be starting construction of the Baltic 175 Pink Gin VI the same year as our company celebrates
More informationINTERNATIONAL SUNFISH CLASS ORGANIZATION CLASS RULES
INTERNATIONAL SUNFISH CLASS ORGANIZATION November 2017 CLASS RULES 1. GENERAL The design and development of the Sunfish sailboat was directed to the creation of a one-design class where the true test is
More informationRules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION
MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2011 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that the Hull form, hull weight, Sail plan and Spars, the
More informationClassic Crosby Wianno Senior in excellent condition. Just launched for the 2018 season SALTWORKS is ready to go to her next owners
http://www.yachtworld.com/brooklin Brooklin Boat Yard - John Maxwell P.O. Box 143 Brooklin, ME 04616, United States Tel: 207-359-2193 Tel: 207-387-8383 Fax: 207-359-8871 brokerage@brooklinboatyard.com
More informationAMYA Soling 50 Class Rules
AMYA Soling 50 Class Rules - 2009 Overall General Specifications Length = 50 Overall Beam = 12 1/8 Overall Draft = 11 Sail Area = 800 Square Inches Displacement = 17 lbs. Minimum Mast Height = 61-1/4 Maximum
More informationTHE INTERNATIONAL EIGHT METRE ASSOCIATION
Subject: The Sira Cup Rules June 25 th, 2016 Dear members, For the past 33 years, the classic 8-Metres have been racing for the Sira Cup. Over these years the Deed of Gift remained our governing document,
More informationSpecification of Monotype-XV Accepted 1993
Specification of Monotype-XV Accepted 1993 3. CONSTRUCTION AND MEASUREMENT RULES 3.1 FUSELAGE MAX MIN 3.1.1 Length overall 7465 7435 3.1.2 Distance from bow to mast step pivoting point(middle hole of the
More informationCarving Ship Model Hulls Laminated and Machine Carved Hulls
Carving Ship Model Hulls Laminated and Machine Carved Hulls Pete Jaquith 09 June 2015 Topsail Schooner Eagle 1847 Topsail schooner rig Built in Arrowsic Island, ME in 1847 3/16 to the foot, 1:64 scale
More informationBlazer Marine, Whiplash Sport 40
Blazer Marine, Whiplash Sport 40 Thank you for choosing to build the Whiplash 40. We have spent over 12 years perfecting this design, and finally we are making it available to the world. We are excited
More informationAn Australian Classic by spectre.com
An Australian Classic by www.go spectre.com Your Bug! Welcome to the Balain Bug experience!!!!!! The Bug kit has been designed so as to be a modern version of the Traditional Bug now you can sail like
More informationAlan Pape 35 Morvoren
Alan Pape 35 Morvoren Make: Model: 35 Length: Alan Pape 10.45 m Price: EUR 19,950 Year: 1990 Condition: Used Boat Name: Hull Material: Draft: Number of Engines: 1 Fuel Type: Morvoren Fibreglass (GRP) 1.8
More informationArmed Virginia Sloop - Part 4 Deck Fittings
Armed Virginia Sloop - Part 4 Deck Fittings With the deck planking completed, I planked the quarterdeck bulkhead and painted the inside of the bulwarks (but not the outside of the hull). Then I moved on
More informationZEPHYR CLASS RULES. June 2014
1. GENERAL 1.1. Name ZEPHYR CLASS RULES June 2014 The class shall be known as the Zephyr Class. The Zephyr is a one-design class. 1.2. Control The class shall be administered by the Zephyr Owners Association
More informationPRESS RELEASE New DUFOUR 45 Performance
PRESS RELEASE New DUFOUR 45 Performance PREFACE The latest born of the Performance Signature of Dufour Yachts, the Dufour 45 Performance will make her first appearance at the international boats shows
More information2018 INTERNATIONAL DRAGON CLASS RULES
2018 INTERNATIONAL DRAGON CLASS RULES Authority*: World Sailing World Sailing is not a National Authority (NA) Nominal Principal Dimensions LOA 8.9m Beam 1.95m Draft 1.2m Displacement 1700kg (with mast)
More informationTUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b
TUNE YOUR SAILS FOR OUTRIGHT SPEED Mast Tuning Tuning Guide for the Carbon Mast SET SPREADER ANGLE Check spreader angle by placing a straightedge or string from shroud to shroud at the spreaders. Measure
More information"Fomo" is a highly competitive Farr 280 which has recently had success in the UK's Farr 280 circuit, as well as the HP30 class.
Farr 280 FOMO Year: 2015 Current Price: 136,000 USD Location: Cowes, Isle of Wight, United Kingdom Hull Material: E-glass/epoxy/Corecell M-Foam "Fomo" is a highly competitive Farr 280 which has recently
More informationSoling Building Tips II
Soling Building Tips II Prepared: Arthur Deane Jan 20, 2002 adeane@ic.net Introduction The following are some lessons learned and experience gained in building a Soling kit. The plan developed is based
More informationFarr 11s 11meter Canting Keel Day Racer
Projected Price: $225,000 Boat #3 available June 2007 LOA: 36.68 (11.18 m) DWL: 32.81 (10.00 m) Beam: 11.25 (3.281 m) Draft: 8.86 (2.70 m) Displacement: Ballast: 5,300 lbs. (2,400 Kg) 2,400 lbs. (1,090
More information1982 Hydrostream Viking Restoration
1982 Hydrostream Viking Restoration Part 2c: The Rebuild Daniel W. Rickey Winnipeg, Manitoba Canada daniel@cancercare.mb.ca 2000-09-22 Introduction Part one of this report showed how the shoddy manufacturing
More informationWebsite:
Introduction The Javelin is a high performance, single trapeze, 14ft two-handed skiff raced competitively throughout New Zealand and Australia. Its lightweight 70kg hull, and powerful, efficient sail plan
More informationMAXIMUM SAIL POWER CHAPTER 7 MAINSAIL DETAILS FOR THE CRUISING SAILOR
MAXIMUM SAIL POWER CHAPTER 7 THE DEVIL IS IN THE DETAILS - Part 2 MAINSAIL DETAILS FOR THE CRUISING SAILOR It used to be simple. In the old days your sailmaker offered you one kind of mainsail and sailors
More information