SAFETY DATA SHEET. EMERGENCY PHONE: For an emergency involving spill, leak, fire, exposure or accident call CHEMTREC:

Transcription

1 SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Chemical Class: BRT MMO-250 Earth-like metal oxides Supplier: Blue Ribbon Technology, Inc Dairy Ashford, Suite 135 Product Information: (281) Fax: (281) EMERGENCY PHONE: For an emergency involving spill, leak, fire, exposure or accident call CHEMTREC: COMPOSITION, INFORMATION ON INGREDIENTS Ingredient Name: CAS No. Contents: Proprietary Ingredients Various 100 % 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: CAUTION: CAN CAUSE EYE, SKIN and RESPIRATORY TRACT IRRITATION. Avoid contact with eyes. Avoid breathing airborne product. Do not take internally. Wash thoroughly after handling. This product is a white powder and a nuisance dust. ACUTE EFFECTS: HEALTH HAZARDS, GENERAL: Particles may cause mechanical irritation to the eyes, nose, throat and lungs. INHALATION: INGESTION: SKIN: EYES: May be irritating to the respiratory tract if inhaled. May cause gastric distress, and nausea if ingested. Slightly irritating. Irritating to the eyes. CHRONIC EFFECTS: CARCINOGENICITY: IARC: Not listed. OSHA:. NTP: Not listed. ROUTE OF ENTRY: Inhalation. Skin and/or eye contact Page 1 of 6

2 TARGET ORGANS: Respiration 4. FIRST AID MEASURES GENERAL: INHALATION: INGESTION: SKIN: EYES: Persons seeking medical attention should carry a copy of this MSDS with them. Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Get medial attention. Drink a couple of glasses water or milk. Do NOT induce vomiting unless directed to do so by a physician. Never give anything by mouth to an unconscious person. Get medical attention. Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if any discomfort continues. Promptly wash eyes with lots of water while lifting the eyelids. Continue to rinse for at least 15 minutes. Get medical attention immediately. Continue to rinse. 5. FIRE FIGHTING MEASURES AUTO IGNITION TEMP ( F) FLAMMABILITY LIMIT LOWER (%) FLAMMABILITY LIMIT UPPER (%) N/D N/D N/D EXTINGUISHING MEDIA: Carbon dioxide (CO 2 ), dry chemicals, and foam. Water spray, fog or mist SPECIAL FIRE FIGHTING PROCEDURES: Wear positive-pressure, self-contained breathing apparatus (SCBA) and protective fire fighting clothing (including fire fighting helmet, coat, pants, boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance. UNUSUAL FIRE & EXPLOSION HAZARDS: Toxic gases are formed when heated. HAZARDOUS COMBUSTION PRODUCTS: Irritating gases/vapors/fumes. 6. ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Wear proper personal protective equipment (see MSDS Section 8). SPILL CLEAN-UP PROCEDURES: Avoid generating and spreading of dust. Shovel into dry containers. Cover and move the containers. Flush the area with water. Do not contaminate drainage or waterways. Repackage or recycle if possible. 7. HANDLING AND STORAGE HANDLING PRECAUTIONS: Avoid handling causing generation of dust. Wear full protective clothing for prolonged exposure and/or high concentrations. Eye wash and emergency shower must be available at the work place. Wash Page 2 of 6

3 hands often and change clothing when needed. Provide good ventilation. Mechanical ventilation or local exhaust ventilation is required. STORAGE PRECAUTIONS: Store at moderate temperatures in dry, well ventilated area. Keep in original container. 8. EXPOSURE CONTROLS, PERSONAL PROTECTION OSHA PEL: ACGIH TLV: OTHER: INGREDIENT NAME: CAS No.: TWA: STEL: TWA: STEL: TWA: STEL: UNITS: Proprietary ingredients 10 5 mg/m 3 Resp.dust INGREDIENT COMMENTS: This product is regulated as nuisance particulates (dust/mist/aerosol). TLV: 5 mg/m 3 resp. dust; PEL: 10 mg/m 3 resp. dust. Based on known component data PROTECTIVE EQUIPMENT: ENGINEERING CONTROLS: Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to reduce air contamination and keep worker exposure below the applicable limits. VENTILATION: RESPIRATORS: Supply natural or mechanical ventilation adequate to exhaust airborne product and keep exposures below the applicable limits. Use at least a NIOSH-approved N95 half-mask disposable or reusable particulate respirator. In work environments containing oil mist/aerosol use at least a NIOSH-approved P95 half-mask disposable or reusable particulate respirator. PROTECTIVE GLOVES: Use suitable protective gloves if risk of gross and repeated skin contact. EYE PROTECTION: Wear dust resistant safety goggles where there is danger of gross eye contact. PROTECTIVE CLOTHING: Wear appropriate clothing to prevent repeated or prolonged skin contact. HYGENIC WORK PRACTICES: Wash promptly with soap and water if skin becomes contaminated. Change work clothing daily if there is any possibility of contamination. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance/Physical State: Powder, dust. Color: White. Odor: Odorless or no characteristic odor. Solubility Description: Slight. Bulk Density: lb/cu.ft. Vapor Density (air=1) N/A Vapor Pressure: N/A Temperature ( F). ph-value, Dilute Solution Concentration (%,M): 1% Page 3 of 6

4 10. STABILITY AND REACTIVITY STABILITY: CONDITIONS TO AVOID: HAZARDOUS POLYMERIZATION: POLYMERIZATION DESCRIPTION: Normally stable. Keep away from humidity. Will not polymerize. Not applicable. MATERIALS TO AVOID: HAZARDOUS DECOMPOSITION PRODUCTS: None known. No specific hazardous decomposition products noted. 11. TOXICOLOGY INFORMATION TOXICOLOGY INFORMATION: No toxicology data is available for this product. Single dose oral toxicity is believed to be low. 12. ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No ecological information is available for this product. 13. DISPOSAL CONSIDERATIONS WASTE MANAGEMENT: This product does not meet the criteria of a hazardous waste if discarded in its purchased form. Under RCRA, it is the responsibility of the user of the product to determine at the time of disposal, whether the product meets RCRA criteria for hazardous waste. This is because product uses, transformations, mixtures, processes, etc., may render the resulting materials hazardous. Empty containers retain residues. All labeled precautions must be observed. DISPOSAL METHODS: Recover and reclaim or recycle, if practical. Should this product become a waste, dispose of in a permitted industrial landfill. 14. TRANSPORT INFORMATION U.S. DOT: CANADIAN TRANSPORT: IMDG/IMO: ICAO/IATA: Page 4 of 6

5 15. REGULATORY INFORMATION REGULATORY STATUS OF INGREDIENTS NAME CAS No: TSCA: CERCLA: SARA 302: SARA 313 DSL (CAN): Proprietary Ingredients Yes No No No Yes US FEDERAL REGULATIONS: WASTE CLASSIFICATION: Not a hazardous waste by U.S. RCRA criteria. See Section 13. REGULATORY STATUS: This product or its components, if a mixture, is subjected to following regulations (not meant to be all inclusive- selected regulations represented): SECTION 313: This product does not contain toxic chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR Part 372. SARA 311 Categories: 1: Immediate (Acute) Health Effects. The components of this product are listed on or are exempt from the following international chemical registries: TSCA (US) DSL (Canada) EINECS (Europe) AICS (Australia) STATE REGULATIONS: STATE REGULATORY STATUS: This product or its compounds, if a mixture, is subject to the following regulations (Not meant to be all inclusive selected regulations represented): PROPOSITION 65: This product does not contain chemicals considered by the state of California s Safe Drinking Water and Toxic Enforcement Act of 1986 as causing cancer or reproductive toxicity and for which warnings are now required. CANADIAN REGULATIONS: LABELS FOR SUPPLY: REGULATORY STATUS: This Safety Data Sheet has been prepared in compliance with the Controlled Product Regulations. 16. OTHER INFORMATION NPCA HMIS HAZARD INDEX: FLAMMABILITY: REACTIVITY: NPCA HMIS PERS. PROT. INDEX: USER NOTES: INFORMATION SOURCES: 1 Slight Hazard 0 Slight Hazard 0 Minimal Hazard E Safety Glasses, Gloves, Dust Respirator N/A = Not applicable N/D = Not determined OSHA Permissible Exposure Limits, 29 CFR 1910, Subpart Z, Section 191\0.1000, Air Contaminants. ACGIH Threshold Limit Values and Biological Exposure Indices for Chemical Substances and Physical Agents (latest edition). Page 5 of 6

6 Sax s Dangerous Properties of Industrial Materials, 9 th ed., Lewis, R.J. Sr., (ed.), VNR, New York, New York, (1997) Product information was provided by the commercial vendor(s). DATE: March 2, 2008 DISCLAIMER: The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Blue Ribbon Technology be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Blue Ribbon Technology has been advised of the possibility of such damages. Page 6 of 6