SAFETY DATA SHEET 1. Identification Product identifier Cork Adhesive Other means of identification Recommended use Recommended restrictions

Transcription

1 SAFETY DATA SHEET 1. Identification Product identifier Other means of identification None. Recommended use Solvent-based, penetrating sealer. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Supplier Company name Southern Grouts and Mortars, Inc. Address 1502 SW 2nd Place Pompano Beach, Florida Telephone number (954) Fax (954) Contact name Technical Manager Website Emergency telephone (954) number 2. Hazard(s) identification Classification of the substance or mixture This product does not meet the criteria for classification as hazardous under the GHS and 29 CFR Label elements GHS label elements Hazard pictograms Signal word Hazard statements Classification system: NFPA rating (scale 0 4) HMIS-rating (scale 0 4) Health = 1 Fire = 0 Reactivity = 0 Health = 1 Fire = 0 Physical Hazard = 0 3. Composition/information on ingredients Chemical characterization: Mixtures Description: Adhesive Dangerous components: No hazardous/reportable components Cas # Water 31-48% Trade name: SGM First-aid measures Description of first aid measures After inhalation: Overexposure, remove to fresh air and seek medical attention. After skin contact: Immediately wash with water and soap and rinse thoroughly. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: Do not induce vomiting; immediately call for medical help. 1 / 6

2 Most important symptoms and effects, both acute and delayed: Indication of any immediate medical attention and special treatment needed: No further relevant information available 5. Fire-fighting measures Extinguishing media Suitable extinguishing agents: Special hazards arising from the substances or mixture: Protective equipment: CO2, extinguishing powder or water spray. Fight larger fires with water spray. Use fire-fighting measures that suit the environment. Dried solids can burn and release toxic fumes and vapors. Protective clothing and respiratory protective device. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures: Environmental precautions: Methods and material for containment and cleaning up: Reference to other sections: Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation Dilute with water. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Wash area thoroughly with water. Dispose of contaminated material as waste in accordance with federal state and local regulations. Ensure adequate ventilation. See section 7 for information on safe handling See section 8 for information on personal protection equipment See section 13 for disposal information 7. Handling and storage Precautions for safe handling: Information about protection against explosions and fires: Conditions for safe storage, including any incompatibilities Storage Requirements to be met by store rooms and receptacles: Information about storage in one common storage facility: Further information about storage conditions: Avoid prolonged or repeated contact with skin. Avoid contact with eyes. Wash thoroughly after handling. No special measures required. Store above 40 F. Freeze-thaw stable up to five cycles at 20 F. Not required Protect product from freezing. Specific end use(s) 8. Exposure controls/personal protection Additional information about design of technical systems: No further data; see item 7 Control parameters Components with limit values that require monitoring at the workplace: This product does not contain any relevant quantities of materials with critical values that have to monitor at the workplace. Additional information: The lists that were valid during the creation were used as basis. Exposure controls 2 / 6

3 Personal protective equipment (see listings below) General protective and hygienic measures: Breathing equipment: Protection of hands: Material of gloves: Eye protection: Body protection: The usual precautionary measures for handling chemicals should be followed. Not necessary if room is well-ventilated Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/ the preparation. natural rubber Safety glasses with side shields Protective work clothing 9. Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Heavy paste Color: Tan to light beige Odor: Resinous Odour threshold: ph-value at 20 C (68 F): Change in condition Melting point: Undetermined Boling point: 212 F (100 C) Flash point: Flammability (solid, gaseous): Ignition temperature: Decomposition temperature: Auto igniting: Product is not self-igniting Danger of explosion: Product does not present an explosion hazard. Flammable limits: Lower: Upper: Specific gravity at 20 C (68 F): Relative density: Vapour density: Evaporation rate: Slower than ether Solubility in/miscibility with Water: Miscible in water, difficult to mix Solvent content: Organic solvents: 0.0% Water: 31-48% Other information: California VOC Compliance: Solvent Free Product SCAQMD Rule 1168: VOC compliant 10. Stability and reactivity Reactivity Chemical stability Thermal decomposition /conditions to be avoided: Possibility of hazardous reactions: Conditions to avoid: Incompatible materials: Hazardous decomposition products: No decomposition if used according to specifications No dangerous reactions known. Carbon monoxide and carbon dioxide 3 / 6

4 11. Toxicological information Information on toxicological effects Acute toxicity: Primary irritant effect: on the skin: May irritate the skin on the eye: May irritate the eye Sensitization: No sensitizing effects known. Additional toxicological information: The product is not subject to classification according to internally approved calculation methods for preparations: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us. Carcinogenic categories: IARC (International Agency for Research on Cancer) NTP (National Toxicology Program) OSHA-Ca (Occupational Safety & Health Administrations 12. Ecological information Toxicity Aquatic toxicity: Persistence and degradability: Bioaccumulative potential: Mobility in soil: Other adverse effects: 13. Disposal considerations Waste treatment methods Recommendation: Uncleaned packaging: Recommendation: Comply with current regulations Comply with current regulations. 14. Transport information 4 / 6

5 Un-Number DOT, ADR, AND, IMDG, IATA UN proper shipping name DOT, ADR, AND, IMDG, IATA Transport Hazard class (es) DOT, ADR, AND, IMDG, IATA Class Packing group DOT, ADR, IMDG, IATA Environmental hazards: Special precautions for user Transport in bulk according to Annex II of MARPOL73/45 and the IBC Code Transport/Additional information: DOT, ADR, IMDG, IATA in transport. Not dangerous according to the above specifications. UN Model Regulation : 15. Regulatory information US REGULATIONS Safety, health and environmental regulation/legislation specific for the substance or mixture Sara Section 355 (extremely hazardous substances): Section 313 (Specific toxic chemical listings): TSCA (Toxic Substances Control Act): All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements, Proposition 65 Chemicals known to cause cancer: Chemicals know to cause reproductive toxicity: (DSL) Canada Domestic Substance List All components of this product are on the DSL (Canada Domestic Substance list) or are exempt from SDL requirements Cancerogenity categories 5 / 6

6 EPA (Environmental Protection Agency) TLV (Threshold Limit Value established by ACHIH) NIOSH-Ca (National Institute for Occupational Safety and Health) 16. Other information, including date of preparation or last revision Additional information Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of the product s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for competitive reasons. Section 8 Exposure Limits attained from and This Safety Data Sheet (SDS) meets the requirements of the Federal OSHA Hazard Communication Standard (29 CFR ). This product has been classified according to the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all of the information required by the CPR. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief accurate and reliable as of the date compiled. However, no representation, warranty or guarantee expressed or implied, is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. Nothing herein shall be construed as a recommendation for uses which infringe valid patents or as extending a license under valid patents. This SDS provides selected regulatory information on this product, including its components. This is not intended to include all regulations. It is the responsibility of the user to know and comply with all applicable rules, regulations and laws relating to the product being used. Vertical lines in the left-hand margin indicate changes compared with the previous version. 6 / 6