Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet Revision Number: Issue date: 03/15/ PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation 10 Finderne Avenue, Suite B Bridgewater, New Jersey LOCTITE LIOFOL HS B7710AR known as LATISEAL B7710AR Adhesive Region: United States Contact information: Customer Service: MEDICAL EMERGENCY Phone: Poison Control Center (toll free) or TRANSPORT EMERGENCY Phone: CHEMTREC (toll free) or Internet: 2. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW HMIS: Physical state: Liquid HEALTH: *1 Color: Whitish FLAMMABILITY: 0 Odor: Mild PHYSICAL HAZARD: 0 Personal Protection: See MSDS Section 8 CAUTION: MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. REPEATED OR PROLONGED CONTACT MAY CAUSE ALLERGIC SKIN REACTION. Relevant routes of exposure: Skin, Inhalation, Eyes Potential Health Effects Inhalation: Skin contact: Eye contact: Ingestion: Existing conditions aggravated by exposure: May cause respiratory tract irritation. May cause irritation. Prolonged contact with this product may cause allergic skin sensitization reactions. May cause irritation. May cause gastrointestinal tract irritation if swallowed. Eye, skin and respiratory disorders. This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR ). See Section 11 for additional toxicological information. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous components CAS NUMBER % Aliphatic polyurethane Proprietary Di(2-ethylhexyl) sulfosuccinate Na FIRST AID MEASURES Inhalation: Move to fresh air. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention. Page 1 of 5

2 Skin contact: Immediately wash skin thoroughly with soap and water. Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical attention. Ingestion: DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get immediate medical attention. 5. FIRE FIGHTING MEASURES Flash point: Autoignition temperature: Flammable/Explosive limits - lower: Flammable/Explosive limits - upper: Extinguishing media: Special firefighting procedures: Unusual fire or explosion hazards: Hazardous combustion products: Not applicable Use extinguishing measures appropriate to local circumstances and the surrounding environment. Keep unnecessary personnel away. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. This product is an aqueous mixture which will not burn. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Smoke. Oxides of carbon. 6. ACCIDENTAL RELEASE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Clean-up methods: Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways. Small spills can be absorbed with vermiculite, clay or other suitable nonbiodegradable absorbent material, scooped up and placed in containers. For large spills dike ahead and collect liquid. Follow all local, state, federal and provincial regulations for disposal. 7. HANDLING AND STORAGE Handling: Storage: Wear suitable protective clothing, safety glasses and gloves. Avoid skin and eye contact. Wash hands before breaks and immediately after handling the product. Avoid breathing vapors or mists of this product. Keep container closed. For safe storage, store at or above 3 C (37.4 F) Protect from freezing. For information on product shelf life, please review labels on container or check the Technical Data Sheet. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed. Page 2 of 5

3 Hazardous components ACGIH TLV OSHA PEL AIHA WEEL OTHER Aliphatic polyurethane Di(2-ethylhexyl) sulfosuccinate Na Engineering controls: Respiratory protection: Eye/face protection: Skin protection: Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits. Use NIOSH approved respirator if there is potential to exceed exposure limit(s). Observe OSHA regulations for respirator use (29 CFR ). Safety goggles or safety glasses with side shields. Wear face shield as necessary when spraying. Use impermeable gloves and protective clothing as necessary to prevent skin contact. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Liquid Color: Whitish Odor: Mild Odor threshold: ph: 7-8 Vapor pressure: Boiling point/range: Melting point/ range: Specific gravity: 1.05 Vapor density: Heavier than air. Flash point: Not applicable Flammable/Explosive limits - lower: Flammable/Explosive limits - upper: Autoignition temperature: Evaporation rate: Slower than diethyl ether. Solubility in water: Miscible Partition coefficient (n-octanol/water): VOC content: 0 % (minus exempt solvents and water). Viscosity: >= 0 mpa.s 10. STABILITY AND REACTIVITY Stability: Hazardous reactions: Hazardous decomposition products: Incompatible materials: Conditions to avoid: Stable under normal conditions of storage and use. Will not occur. Smoke. Oxides of carbon. known Do not freeze. 11. TOXICOLOGICAL INFORMATION Acute inhalation product toxicity: Toxic by inhalation. Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen (Specifically Regulated) Aliphatic polyurethane No No No Di(2-ethylhexyl) sulfosuccinate Na No No No Hazardous components Aliphatic polyurethane Di(2-ethylhexyl) sulfosuccinate Na Health Effects/Target Organs No Data Allergen, Gastrointestinal, Irritant Page 3 of 5

4 12. ECOLOGICAL INFORMATION Ecological information: 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Hazardous waste number: Legal disposition of wastes is the responsibility of the owner/generator of the waste. Applicable federal, state and/or local regulations must be followed during treatment, storage, or disposal of waste containing this product. To the best of our knowledge, this product is not listed nor does it meet the criteria of a hazardous waste if discarded in its purchased form. However, under RCRA, it is the responsibility of the user to determine at the time of disposal whether a product meets any of the RCRA hazardous waste criteria. This is because product uses, transformations, mixtures, processes, etc., may render the resulting material hazardous, under the criteria of ignitability, corrosivity, reactivity and toxicity characteristics under the new Toxicity Characteristics Leaching Procedure (TCLP) 40 Code of Federal Regulations U.S. Department of Transportation Ground (49 CFR) 14. TRANSPORT INFORMATION International Air Transportation (ICAO/IATA) Water Transportation (IMO/IMDG) 15. REGULATORY INFORMATION United States Regulatory Information TSCA 8 (b) Inventory Status: TSCA 12(b) Export Notification: CERCLA/SARA Section 302 EHS: CERCLA/SARA Section 311/312: CERCLA/SARA 313: California Proposition 65: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. above reporting de minimus above reporting de minimis Immediate Health, Delayed Health above reporting de minimis This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Canada Regulatory Information CEPA DSL/NDSL Status: WHMIS hazard class: One or more components are not listed on, and are not exempt from listing on either the Domestic Substances List or the Non-Domestic Substances List. D.2.B Page 4 of 5

5 16. OTHER INFORMATION This material safety data sheet contains changes from the previous version in sections: New Material Safety Data Sheet format. Prepared by: Carrie Oswald, Regulatory Affairs Specialist DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation and its affiliates ( Henkel ) does not assume responsibility for any results obtained by persons over whose methods Henkel has no control. It is the user s responsibility to determine the suitability of Henkel s products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any Henkel s products. In light of the foregoing, Henkel specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel s products. Henkel further disclaims any liability for consequential or incidental damages of any kind, including lost profits. Page 5 of 5