PRINT DATE: 1/07/07 Version 1.2 REVISION DATE: 1/07/07 MATERIAL SAFETY DATA SHEET MSDS 294 PAGE 1 OF 6

Transcription

1 PRINT DATE: 1/07/07 Version 1.2 REVISION DATE: 1/07/07 MATERIAL SAFETY DATA SHEET MSDS 294 PAGE 1 OF 6 1. Product and Company Identification 1.1 PRODUCT NAME: KEIM SILAN PRIMER 1.2 USE OF PRODUCT Hydrophobic impregnation for mineral building materials such as concrete, render, artificial stones etc. 1.3 SUPPLIER: Equus Industries Ltd Sheffield Street Riverlands Industrial Estate Blenheim, Marlborough, New Zealand Telephone: Fax: EMERGENCY CONTACT: National Poison Centre Telephone: Information about Safety Data Sheet: Telephone: :00am 6:00pm Mon - Fri 2. Hazards Identification 2.1 Classification: Dangerous Goods classification according to New Zealand Dangerous Goods Code. 2.2 Risk & Safety Phrases: R11,38 S7/9,16,23,36/37/39 The full text of each R & S phrases are listed in Section Composition/Information on Ingredients 3.1 Chemical Characterization (Preparation): This product is a preparation. 3.2 Hazardous Ingredients: CAS NO. COMPONENT CONCENTRATION % CLASSIFICATION Ethanol 80% R Triethoxyisobutylsilane 20% R38

2 PAGE 2 OF Only ingredients, additives and impurities which are classified and contribute to the classification of the product are included in this section. 4. First Aid Measures 4.1 After Inhalation: Sit down in a fresh air environment. If dizziness symptoms persist seek medical advice. 4.2 After Skin Contact: Wash skin with plenty of soap and water and seek medical advice if irritation develops. 4.3 After Eye Contact: Rinse opened eye for at least 10 minutes under running water or with eyewash. Remove contact lenses. If irritation persists seek medical attention. 4.4 After Ingestion: Do not induce vomiting. Rinse mouth with water and drink 2-4 cups of milk or water. Allow affected person to rest. Seek medical attention. 4.5 Advice to Doctor: Treat symptomatically. Persons with skin or eye disorders or liver, kidney, chronic respiratory diseases, or central and peripheral nervous system diseases may be at increased risk from exposure to this substance. 5. Fire Fighting Measures 5.1 Suitable Extinguishing Media: Use carbon dioxide, water, dry chemical or foam. 5.2 Protective Equipment: Use self contained breathing apparatus operated in positive pressure mode when in close proximity to fire, and wear full body protective clothing. 5.3 Specific Hazards: Vapour may travel considerable distance to source of ignition and flash back. Can release vapours that form explosive mixtures at temperatures above the flashpoint. Containers may explode in the heat of a fire. 5.4 Combustion Products: Carbon dioxide, carbon monoxide, acrid smoke and toxic fumes. 5.5 Precautions in Connection with Fire: Do not use a heavy water stream, in order to avoid the fire spreading. Apply water spray or fog to cool nearby equipment. Avoid fire fighting water entering environment. 6. Accidental Release Measures 6.1 Preliminary Action and Precautions: Eliminate every possible source of ignition and increase ventilation.

3 PAGE 3 OF Evacuate all personnel immediately and ventilate area Avoid breathing vapour and contact with skin, eyes and clothing Wear recommended personal protective equipment Shut off leaks if possible without risk Dike in the spilled product as much as possible with inert material Prevent entry of product in public water, sewers, soil etc Collect the spillage in closable, suitable disposal containers Clean up and spills as soon as possible, using an inert absorbent material and eliminate as hazardous waste. 7. Handling and Storage 7.1 Handling: Always provide adequate ventilation Avoid breathing vapour or mist Avoid contact with eyes, skin and clothing Wash hands thoroughly after handling, especially before eating, drinking, smoking or using the toilet Do not use near welding operations, flames, hot surfaces or other ignition sources. 7.2 Storage: Store in a well ventilated, fire proof place Store away from sources of ignition, (i.e. sparks, open flames, heat etc.) Store away from perchlorates, peroxides, chromic acid or nitric acid and oxidizing materials Keep containers tightly closed at all times. 8. Exposure Controls and Personal Protection Equipment 8.1 Exposure Limits: Ethanol Cas TLV/TWA (ACGIH): 1000ppm (1880mg/m 3 )

4 PAGE 4 OF Exposure Controls: Exposure Controls in the Work Place: Ensure adequate ventilation at all times to maintain exposure levels below exposure limits set for the solvents Personal Protection Equipment: Respiratory Protection Use Approved respirator with replaceable organic vapour filter. Reference should be made to Australian standards AS/HZS Use and maintenance of respiratory protection devices and AS/HZS 1716 Respiratory Protection Devices, in order to make any necessary changes for individual circumstances. Hand Protection Eye Protection Body Protection Use PVC, neoprene or nitril-rubber gloves. Use protective goggles. Long sleeved overalls. 9. Physical and Chemical Properties 9.1 General Information: Physical State/Form Liquid Colour Clear Odour Slight ethanol Boiling Point/Range 84 o C Flash Point 10 0 C Vapor Pressure 65hPa (20 0 C) Water Solubility/Miscibility Partly soluble Density 0.81 g/cm Stability and Reaction 10.1 General Information: This material is stable when properly handled and stored. No hazardous reactions are known Conditions to Avoid: Open flames, sparks, heat and other sources of ignition Material to Avoid: Strong oxidizing agents, perchlorates, peroxides, acids, and alkali metals Hazardous Decomposition Products: None expected when material properly handled and stored. For thermal decomposition see Section 5.

5 PAGE 5 OF Toxicological Information 11.1 General Information: No specific toxicity data is available for this product 11.2 Skin Contact: May cause moderate irritation Eye Contact: May cause eye irritation. May cause painful sensitization to light. May cause chemical conjunctivitis Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea Inhalation: May cause respiratory tract irritation. Symptoms may include nausea, headache and dizziness Chronic Effects: Inhalation in high concentrations may cause central nervous system effects and may cause narcotic effects. May cause systemic toxicity with acidosis. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness and nausea. Advanced stages may cause collapse, unconsciousness, and coma. May cause cyanosis of the extremities to the skin. High concentrations may cause liver, kidney and heart damage. 12. Ecological Information 12.1 Environment Protection: Prevent from entering sewers, drains and waterways Ecotoxity: Data not available Persistence and degradability: Data not available Bioaccumulative Potential: Data not available. 13. Disposal Consideration 13.1 Material Dispose of according to regulations by incineration in a special waste incinerator or landfill at a permitted facility in accordance with local/national regulations.

6 PAGE 6 OF Transport Information 14.1 Land Transport: Road: Flammable liquid (Class 3, GPII, Haz Chem 3YE) Rail: Flammable liquid (Class 3, GPII, Haz Chem 3YE) 14.2 Sea Transport: Flammable liquid (Class 3.2, GPII, Haz Chem 3YE) 14.3 Air Transport: Flammable liquid (Class 3, GPII, Haz Chem 3YE) 14.4 Postal and Courier Service: This product cannot be transported by courier. 15. Regulatory Information This product is hazardous and flammable. 16. Other Information 16.1 Full Text of R-Phrases Contained in Section 2: R11 Highly flammable R38 Irritating to skin 16.2 Full Text of S-Phrases Contained in Section 2: S7/9 Keep container tightly closed and in a well-ventilated place S16 Risk of explosion, do not smoke S23 Do not inhale vapours S36/37/39 Wear suitable protective clothing, gloves and eye/face protection The information contained in this Data Sheet relates only to the specific material identified. Equus Industries Ltd believes the information to be accurate and reliable as at the date of this Data Sheet. No Warranty, Guarantee or representation is expressed or implied by the Company as to the absolute correctness or completeness of any representation contained in this Data and assumes no legal responsibility in connection therewith. It can not be assumed that all acceptable safety measures are contained in this Data Sheet, or that additional measures may not be required under particular or exceptional circumstances or conditions.