TOBALAWI ELIJAH BUSAYO MAINTENANCE OFFICER FIDSON HEALTHCARE PLC NIGERIA. Fidson Healthcare Plc
|
|
|
- Damon Price
- 5 years ago
- Views:
Transcription
1 TOBALAWI ELIJAH BUSAYO MAINTENANCE OFFICER FIDSON HEALTHCARE PLC NIGERIA Fidson Healthcare Plc
2 TRAINING TITLE NECESSITY OF SAFETY PRECAUTION IN RELATION TO MAN,MACHINES AND EQUIPMENT IN MANUFACTURING INDUSTRIES
3 OBJECTIVE OF THE TRAINING AT THE END OF THE TRAINING ONE SHOULD BE ABLE TO KNOW : Meaning of Safety Precaution? Some Safety Precautions to follow in Manufacturing industries? Why Safety Precaution?
4 WHAT MAKES SAFETY PRECAUTION? Before Safety Precaution can be explained, the meaning of safety must be known as well as the meaning of precaution. These two words combine together to give Safety Precaution. The meaning will be treated in the next slide.
5 WHAT IS SAFETY? SAFETY can be defined as the condition of being protected from or unlikely to cause danger, risk or injury. It can be also said to be the condition of being SAFE, freedom from danger, risk and injury. SAFETY is no accident.
6 WHAT IS PRECAUTION? PRECAUTION can be defined as a measure taken in advance to prevent something dangerous, unpleasant, injury and inconvenient from happening. It also means exactly what it sound like the prefix PRE- means BEFORE while CAUTION means CAREFULLNESS in the face of danger.
7 MEANING OF SAFETY PRECAUTION According to the meaning of SAFETY and PRECAUTION. Safety Precaution can be said to be any action taken before any TASKS to prevent DANGER, RISK,INJURY OR ACCIDENT during the TASKS. Here TASKS can be operation of Industrial machines/ equipment or maintenance of Industrial machines/equipment in any manufacturing industry.
8 SAFETY PRECAUTION ON MACHINES OPERATION In operation of any machine, there is operating safety precaution according to their Standard Operation Procedure(SOP). This SOP should be followed properly when any machine is being operated in any manufacturing industry. Some of Safety precaution for operation of industrial machine are highlighted as follows:
9 SAFETY PRECAUTION ON MACHINES OPERATION CONTINUE Necessary personal protective equipment (PPE)must be put on properly before operating any machine, such as safety goggle, safety gloves, safety boot, safety clothing, if applied. Do not wear loosed cloth/overall or jewelry when working on moving machine. Keep the machines clean and in good condition.
10 SAFETY PRECAUTION ON MACHINES OPERATION CONTINUE All machinery must have the manufacturer s installed safety guards and ensure all machines guards are in position. Do not run or start any machine unless you are trained on it. Isolate any machine from current before making any adjustment.
11 SAFETY PRECAUTION ON MACHINES OPERATION CONTINUE Do not clean machine when it is running or working. Do not touch moving part of a machine when machine is running. Switch off the machine immediately when anything goes wrong.
12 SAFETY PRECAUTION ON MACHINES OPERATION CONTINUE All equipment or machinery must be shut down when not in use Anyone working on a machine under the influence of drugs or alcohol should be stopped. All equipment/machines safety device must be in good condition.
13 SAFETY PRECAUTION ON MACHINES OPERATION CONTINUE Concentrate on what you are doing whenever you are operating any machine. Do not play practical jokes when operating any machine. Do not take chance when operating a machine. Do not direct compressed air on yourself or your colleague,it CAN KILL.
14 SAFETY PRECAUTION ON MAINTENANCE OF MACHINES Necessary personal protective equipment (PPE)must be put on properly before any machine maintenance can be done such as safety gloves, safety boot, safety clothing /overall etc. You must know the working principle of a machine/equipment before you can carry out maintenance on it.
15 PERSONAL PROTECTIVE EQUIPMENT (PPE)
16 SAFETY PRECAUTION ON MAINTENANCE OF MACHINES CONTINUE Machines should be shut down before any maintenance can be carried out. Use the right tools for the right job. Do not use defect tools e.g. Damage cable,meters,hammer,spanners etc No machine should be modified by personnel who is not specifically trained on the technical aspects of the machine.
17 SAFETY PRECAUTION ON MAINTENANCE MACHINES CONTINUE Keep your workbench and your work area clean. Never leave tools layout where they may cause injury Tools should be properly stored when not in use. Machines should be installed in well ventilated place.
18 WHY SAFETY PRECAUTION? Without safety precaution, accident, injury and loss of life are bound to happen. Before you start using any machine you need to think about what risks may occur and how these can be managed. THIS LEAD TO SAFETY PRECAUTION.
19 WHY SAFETY PRECAUTION CONTINUE Accident or injury did not happen without a cause and these are major causes of accident Lack of training. Missing or loosed machine guards. Unauthorized person/untrained person running a machine or doing maintenance. Carelessness or uncared attitude.
20 THE END THINK SAFETY THINK LIFE
Heavy Duty Drag Harrow
Heavy Duty Drag Harrow OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
THICKNESSER RISK ASSESSMENT (U003ra)
Task Being Carried Out: Area: Persons at Risk: Operation of T500 Thicknesser Brindle Mill Operatives, Maintenance engineers Description of Equipment: Wadkin T500 Thicknesser Serial No.: T500 82240 (Machine
Hazardous Energy Control
Lockout Tagout This program has been prepared to provide assistance in compliance with USA OSHA standards and/or Best Management Practices. It should not be used without consideration of the unique conditions
60 Drum Style Spike Aerator
60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
University of Delaware. Shop Safety
University of Delaware Shop Safety The first step in preventing personal injury or machine damage in the shop is to make sure that you are familiar with and know how to operate the equipment correctly.
DENTAL SHOP SAFETY. James Kaznosky Environmental Health and Safety
DENTAL SHOP SAFETY James Kaznosky Environmental Health and Safety TRAINING OBJECTIVES Types of Machines at Dental School lab General Shop Hazards General Shop Safety Rules What to do in Case of Injury
Heavy Duty Drag Harrow
Heavy Duty Drag Harrow OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
WADKIN OVER HEAD ROUTER RISK ASSESSMENT (U002ra)
Task Being Carried Out: Area: Persons at Risk: Operation of Over Head Router Brindle Mill Operatives, Maintenance engineers Description of Equipment: Wadkin Over Head Router Serial No.: LS 3891 Location
Student Shop Safety. University of Tennessee Safety Guide GS-005. Purpose. Scope and Applicability. Definitions and Abbreviations.
Student Shop Safety University of Tennessee Safety Guide GS-005 Document Contact: EHS Date effective: August 1, 2012 Revision Date: June 7, 2017 Purpose Machine shops are present in many departments and
Composite Pistol-Type Air Needle Scaler OWNER S MANUAL
Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
INTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
Lockout/Tagout - Energy Control Program
Lockout/Tagout - Energy Control Program Lockout and Tagging of ELECTRICAL Circuits This portion of the K.R. Miller Contractors, Inc. safety program has been created to maintain a written copy of procedures
LOCKOUT/TAGOUT PLAN August 2015
LOCKOUT/TAGOUT PLAN August 2015 Office of Environmental Health and Safety 423-354-5224 TABLE OF CONTENTS Purpose and Intended Use... 2 A. Types of Energy Sources... 2 B. Activities Requiring Lockout/Tagout
OWNER S MANUAL. Page: 1 of 8
Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
COGPOLY39 Meet safety, health and environmental requirements in the workplace
Meet safety, health and environmental requirements in the workplace Overview This unit is for those with responsibilities for meeting safety, health and environment requirements in the workplace. It is
Model Visit our website at:
6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL
WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety
"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
Safety and operating instructions
BV 20H Safety and operating instructions Beams and screeds BV 20H Contents Contents Introduction........................................................................ 5 About the Safety and operating
HIGH WHEEL HOSE REEL CART OWNER S MANUAL
HIGH WHEEL HOSE REEL CART OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
HIGH-IMPACT SAFETY TRAINING FOR QUALIFIED ELECTRICAL WORKERS
HIGH-IMPACT SAFETY TRAINING FOR QUALIFIED ELECTRICAL WORKERS This easy-to-use Leaders Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description
Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii
Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6
Accidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
Lockout / Tagout Safety Program
Lockout / Tagout Safety Program Prepared by: The Ohio State University Environmental Health and Safety Occupational Safety & Industrial Hygiene 1314 Kinnear Road Columbus, OH 43212-1168 614-292-1284 Phone
EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico Department of Environmental Health and Safety Reviewed July 2008 TABLE OF CONTENTS Section Page 1.0 INTRODUCTION... 1-1
LOCKOUT/TAGOUT PROGRAM
0 Appendix C OCCUPATIONAL SAFETY AND HEALTH PROGRAM LOCKOUT/TAGOUT PROGRAM Hazardous Energy Control Lockout/Tagout Program TABLE OF CONTENTS Section Page I. Purpose and Scope. 1 II. Definitions 1 III.
Your after-sales service contact:
SB 55/99-100 Operate the Hydraulic Anchor Part Brake 2018-11-28 Rev. B 1 Scope and Target Group Always refer to the user manual for additional information and safety warnings. Only perform this task if
Effective Workplace Inspections
Effective Workplace Inspections Why are workplace inspections important? 3600-Safety Inspections-General Information Workplace inspections help prevent injuries and illnesses. Through critical examination
Module: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
LOCKOUT/TAGOUT PROGRAM
LOCKOUT/TAGOUT PROGRAM HOW CLIMATE ENGINEERS INC. COMPLIES WITH THELO/TO STANDARD It is the intent of Climate Engineers Inc. to comply with OSHA s Control of Hazardous Energy Standard (1910.147). The following
Equipment and Shop Safety. Safety Unit
Equipment and Shop Safety Safety Unit 2 General Safety Rules 1. Listen to or read instructions carefully before attempting to doanything. 2. Wear safety goggles to protect your eyes from chemicals, heated
Most homeowners generally do not consider lawn maintenance a dangerous activity - but it can be if you don't approach it with safety in mind.
Most homeowners generally do not consider lawn maintenance a dangerous activity - but it can be if you don't approach it with safety in mind. Lawn Maintenance Incident Facts: More than 234,000 people received
Product Safety Information
Dwg. Tp2302 Dwg. Tp2301 Dwg. Tp2303 Dwg. Tp2304 Dwg. Tpa1751 45735685 Edition 1 June 2008 Rotary Air Sander, Polisher or Buffer Product Safety Information Save These Instructions MATCO TOOLS EN Product
SECURITY ARRANGEMENTS
Security Arrangements :: 43 7 SECURITY ARRANGEMENTS 7.1 INTRODUCTION The precautions taken to prevent the possibility of accidents is called Security Arrangements. In this lesson you will know about the
Lockout Tagout Program
Lockout Tagout Program RIM of the World Unified School District 27315 North Bay Road Blue Jay, CA 92352 (909) 336-4100 July 2016 Safety and Risk Management Department RIM of the World Unified School District
Manual. FRESH AERO OneOP Model PC (Portable Compressors) Tire Inflator. Where Imagination Meets Innovation
FRESH AERO OneOP Model PC (Portable Compressors) Tire Inflator For inflating aircraft tires and all types of other vehicle tires and air operated devices Manual The Fresh Aero Group Where Imagination Meets
H. Control of Hazardous Energy: Lockout/Tag Out
H. Control of Hazardous Energy: Lockout/Tag Out 1. Purpose Control of Hazardous energy is the purpose of the Lockout- Tagout Program. This program establishes the requirements for isolation of both kinetic
Safety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
Facilities Management
Facilities Management Policy Number: 700.6 Title: Lockout/Tag Out Policy Implementation Date: 2004 Last Audited: July 2 nd, 2018 Last Revised: March 25 th, 2015 Introduction This policy contains the necessary
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON SCENIC LAB SAFETY PROCEDURES (CPAC 154) 1. POLICY The Department Scenic Lab is a facility, which supports courses in scenic design
TEST BENCH SAFETY VALVES ¼ - 5 DN10 DN125
TEST BENCH SAFETY VALVES ¼ - 5 DN10 DN125 Model: VC-40-VYC Table of contents 1. - Installing the test bench 1.1.1- Connecting the compressed air / nitrogen source 1.1.2- Maximum test pressure according
Product Safety Information
16609604 Edition 1 May 2008 Fixtured Air Drill Product Safety Information Save These Instructions EN Product Description A Fixtured Air Drill is a compressed air powered, rotary power tool whose output
Personal commitments you can live and work by:
Personal commitments you can live and work by: I anticipate possible dangers in any given operation and make every effort to analyze and avoid them before starting work, including immediately communicating
20 Ton SD Shop Press Operating Instructions
20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
Energy Control. Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: cell:
Energy Control Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: 905.577.0303 cell: 905.977.0210 consultant@staffaid.ca www.staffaid.com Safety, Energy Control, Power Lockout & Function Test Procedures
LOCKOUT SYSTEM AND POLICIES
LOCKOUT SYSTEM AND POLICIES Lockout System Purpose Employees health and safety takes top priority. Isolating hazardous energy to prevent sudden and unexpected energisation of machines, equipment, and processes
Health, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
1. De-energize circuit serving the outlet following LOTO procedure (see pages 3 5). PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All
University of Massachusetts Dartmouth
Page 1 of 7 University of Massachusetts Dartmouth College of Engineering Mechanical Engineering Department Best Laboratory Safety Practices This handbook intends to provide you with essential safety information
Fiat - Argentina - Wheel Aligner / Headlamp Aimer #16435
2017 Wheel Aligner / Headlamp Aimer Operation & Maintenance Manual Safety Fori Automation Version 1.2 4/21/2017 SECTION 1.0 SAFETY These Safety Requirements Must Be Read And Understood By All Machine Operators,
4-in-1 Professional Inflator Kit
4-in-1 Professional Inflator Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
MCW s Control of Hazardous Energy Program
2018 MCW s Control of Hazardous Energy Program - Lockout Tagout Program This document is MCW s written program for managing the lockout and tagout of hazardous energy, and identifies roles and responsibilities
LO/TO LOCKOUT/TAGOUT PROGRAM
LO/TO LOCKOUT/TAGOUT PROGRAM April 2017 CONTENTS Section 1: Introduction...1 Section 2: Purpose... 1 Section 3: Application... 1 Section 4: Definitions... 2 Section 5: Roles and Responsibilities... 4 Section
PROGRAM: Control of Hazardous Energy (LOCKOUT) Chapter 5
Classroom, Occupational Safety & Health Plan Date: August 5, 2017 PROGRAM: Control of Hazardous Energy (LOCKOUT) Chapter 5 1. Purpose This document establishes the Lockout Program for Tidewater Community
CITY AND COUNTY OF DENVER CR&CF RISK UNIT Job Hazard Analysis
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.4.1 Job Hazard Analysis 1.0 Introduction The Job Hazard Analysis (JHA) shall be used to describe task specific hazards and to identify control measures that
University of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
Training Videos and Other Materials
Training Materials pg 1 Training Videos and Other Materials (Updated as of 9/23/2015) Title Format Category Length Description 12 Secrets to High Self-esteem CD Professional Includes workbook to print
Handout Activity: HA107
Engines: Motive Power Types: Handout Activity: HA107 Student/Intern information: Name Date Class Identifying hazards Summary A workshop is a hazardous environment. The objective of this procedure is to
75 Ton SD Shop Press Operating Instructions
75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
Operating Instructions and Parts Manual 24529
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
SAFETY TRAINING LEAFLET 02 BASIC RULES FOR SAFETY AND GOOD HOUSEKEEPING
SAFETY TRAINING LEAFLET 02 BASIC RULES FOR SAFETY AND GOOD HOUSEKEEPING Doc 23.02/18 EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70 98 Fax: +32 2 219
TEM# Air Hammer Combo USER'S MANUAL
Air Tools TEM# 40 Air Hammer Combo USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions
SAFETY/RISK/HAZARD ASSESSMENT
AIR BREAKER 25KG JACK HAMMER SAFETY/RISK/HAZARD ASSESSMENT PLANT INFORMATION NHG Ref/Part No. Plant Name: Potential Noise Level in Db: Atlas Copco Air Breaker 25kg 100db to less than 120db Required hearing
G10K - 1/2" Heavy-Duty Air Impact Wrench
G10K - 1/2" Heavy-Duty Air Impact Wrench OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS
AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight
ISD #535 Rochester Public Schools
ISD #535 Rochester Public Schools Health & Safety Office Maintenance Service Building 10 9½ St SE Rochester, MN 55904 507-328-4507 Management Plan for Machine Guarding Modification Date Document Modification
LOCKOUT/TAGOUT: Operating Procedure TABLE OF CONTENTS
LOCKOUT/TAGOUT: Operating Procedure TABLE OF CONTENTS A. PURPOSE 1 B. FACILITIES STAFF RESPONSIBILITIES 2 C. TRAINING AND RETRAINING of AFFECTED and EUTHORIZED EMPLOYEES 3 NINE POINTS TO REMEMBER 5 LOCKOUT/TAGOUT
FRESH AERO OneOP Model RC (Reservoir/tank) Tire Inflating System
FRESH AERO OneOP Model RC (Reservoir/tank) Tire Inflating System For inflating aircraft tires and all types of other vehicle tires and air operated devices Manual The Steelebrook Group Where Imagination
PPE and Tools PPE and Tools
PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from
INSTRUCTIONS AND WARNING FOR SAFETY USE OF AIR TOOLS GENERAL RECOMMENDATIONS
INSTRUCTIONS AND WARNING FOR SAFETY USE OF AIR TOOLS GENERAL RECOMMENDATIONS SAFETY is a primary consideration when using the air tool. The tool should be used in the right way with good understanding
To secure the health and safety of workers and workplaces; to ensure everyone goes home safely at the end of each day. To set minimum standards for the management of particular hazards where alternative
310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
Hand & Finger Safety
Hand & Finger Safety HAND/FINGER SAFETY What Is The Most Commonly Used Tool in your Industry? Hammer? Screwdriver? Crescent Wrench? Power Drill? Impact Wrench? HAND/FINGER SAFETY The Most Commonly Used
STANDARD OPERATING PROCEDURE
TO BE USED BY PROPERLY TRAINED AND AUTHORIZED PERSONNEL ONLY This document serves as a guide for the probable hazards of this space and how to remediate those hazards. It is important to remember that
Williamsport Community Woodshop
Center for Creativity Williamsport Community Woodshop Work Rules The following rules are designed for your safety and the safety of other s. Non-compliance to these rules may result in your expulsion from
ASBESTOS ASBESTOS / CERAMIC WOOL CERAMIC WOOL. Safety Card No. 1 June 2014 Powered by: NVDO
ASBESTOS Because of its excellent properties as a material, asbestos was widely used in buildings until the late twentieth century. In 1993, however, its use was prohibited in the Netherlands. Since then,
Lockout/Tagout Program
Lockout/Tagout Program Control of Hazardous Energy Subpart J - 29 CFR 1910.147 29 CFR 1926.417 OSHA Standard All industries must comply Estimated to prevent Approximately 120 fatalities per year 28,000
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Replace a Light Ballast Job Title(s) Performing Task: Electrician, Maintenance
HAZARD IDENTIFICATION & RISK ASSESSMENT
Clearheart Construction Co., Inc. Hazard Identification & Risk Assessment HAZARD IDENTIFICATION & RISK ASSESSMENT If all employees and subcontractors followed established OSHA compliant procedures to accomplish
Sample Lockout/Tagout Policy
Risk Solutions Sample Lockout/Tagout Policy Purpose The purpose of this program is to protect employees from injuries due to the potential release of hazardous energy while servicing and maintaining equipment
QUEENSLAND UNIVERSITY OF TECHNOLOGY
QUEENSLAND UNIVERSITY OF TECHNOLOGY SITE SPECIFIC SAFETY MANAGEMENT PLAN FOR SAMFORD HOUSE SAMFORD ECOLOGICAL RESEARCH FACILITY SAMFORD VALLEY 2007 Dylan Randall SN: 06305466 dylan.randall@student.qut.edu.au
PINNACLE OWNING SAFETY: Zero Fires Zero Loss Incidents 100% Employee Engagement
PINNACLE OWNING SAFETY: Zero Fires Zero Loss Incidents 100% Employee Engagement ENERGIZED WORK PERMIT OVERVIEW Effective January, 2016 ENERGIZED WORK DEFINITION Energized work describes work that must
DRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.
DR ` DRAG HARROW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and
Control of Energy - Isolation Process
Issue Date: 24/03/17 Last Reviewed: 24/03/17 Next Review Date: 24/03/18 Authorised By: Mike Muir Safe Operating Procedure Control of Energy - Isolation Process Purpose: This SOP is based on a Generic 12-step
OSHA Office of Training and Education 2
The Occupational Safety and Health Administration aims to ensure employee safety and health in the United States by working with employers and employees to create better working environments. Since its
Laboratory Personal Protective Equipment & Hazard Assessment Tool
Laboratory Personal Protective Equipment & Hazard Assessment Tool This form must be completed by the person in charge of the laboratory, with the guidance of the Chemical Hygiene Officer to conduct a laboratory
OPERATORS MANUAL MODEL 365 BACK LAPPING MACHINE WARNING
MODEL 365 BACK LAPPING MACHINE OPERATORS MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety instructions.
Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9
Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards
Lockout/Tagout Program Occupation Safety & Health Standards for General Industry 29 CFR
Volunteer State Community College Lockout/Tagout Program Occupation Safety & Health Standards for General Industry 29 CFR 1910.147 The information contained in this maual documents the policies and procedures
Initial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing
Initial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing Answer the following questions to assist you in identifying the health and safety hazards associated with your processes: Section
Leader s Guide ERI Safety Videos
1419 SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting a
EHS-SWP-140. Safe Work Practice. Animal Projects with Chemicals. 1.0 Hazard Description
EHS-SWP-140 This document is to be used when completing the hazard assessment portion of an Animal Use Protocol. Safe Work Practice Animal Projects with Chemicals 1.0 Hazard Description Chemicals utilized
OPERATOR S MANUAL AND PARTS LISTING FOR THE. STM Mounted Harrow
MANUFACTURERS OF QUALITY AGRICULTURAL EQUIPMENT SINCE 1936 OPERATOR S MANUAL AND PARTS LISTING FOR THE STM Mounted Harrow With FH 5-Bar Section VERSION: 10-07AJF TO THE OWNER AND OPERATORS Before assembling
Elements of a Lockout/Tagout Program OSHA
September 15, 2015 Elements of a Lockout/Tagout Program OSHA 1910.147 Dayna Noble Industrial Safety Consultant Specialist Ohio BWC 567-204-8917 Dayna.noble@bwc.state.oh.us Top 10 most frequently cited
Job Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
Hot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
techconnect CARPENTRY Objectives Unit 2 Workplace Safety TechConnect - STUDENT WORKBOOK 2-1 Workplace Safety - Unit 2
Unit 2 Workplace Safety techconnect One of the keys to working in any industry is the safety and health of the workers. The carpentry industry can be a dangerous industry in which to work if you do not