Respiratory protection equipment

Transcription

1 Respiratory protection equipment

2 Designed to go through fire with you. The new Dräger PSS 5000 compressed air breathing apparatus No matter what danger you are faced with: the new Dräger PSS 5000 adapts to your operational conditions. You can select from two harnesses: the basic Dräger Standard (DS) variant and the Dräger Professional (DP), which is particularly robust and offers maximum comfort. To avoid snagging, medium and high-pressure lines are integrated in the back plate. The hoses can be individually routed over the left or right shoulder. The prevention of excessive dirt and water ingress and the ease of dismantling without the need for additional tools results in a harness which is easy to clean and decontaminate and keeps maintenance downtime to a minimum. Within a short time, your Dräger PSS 5000 is ready for the next challenge

3 Breathing apparatus, Dräger Breathing apparatus, Dräger Compressed air breathing apparatus PSS New abrasion-proof upholstery with extremely non-skid anti-slip surface. Solid, rustfree steel buckles. Hose jacket at the shoulder straps for additional protection against getting caught. Shoulder and pelvis belts are provided with a simple snap closure for easy handling. Shoulder fork for optimum adjustment easily adjustable in height. Newly designed, carbon-fibre reinforced carrying box. Large, integrated grips at the carrying box. The medium and high pressure hoses are integrated in the carrying box. Patented pelvis belt connected with the carrying box, able to turn and slide. Pressure reducer with snap closure. Inlet pressure: 200 or 300 bar normal outlet pressure: 1st stage: 6-9 bar air supply output 1st stage: > 1000 l/min warning whistle activating pressure: bar warning whistle loudness: > 90 dba warning whistle frequency range: Hz (version with Bodyguard II) operating temperature range: -30 up to + 60 C approvals: EN137:2006 Typ 2, vfdb 0802 Ex-/Atex-Approval without cylinder and without lung demand valve weight: approx. 4,3 kg Compressed air breathing apparatus PSS 7000 With universal cylinder strap for single cylinders or for two cylinders Compressed air breathing apparatus PSS 7000 With standard cylinder strap for single cylinders Compressed air breathing apparatus PSS 7000 with pressure gauge QC With cylinder quick-connect and standard cylinder strap for single cylinders

4 Breathing apparatus, Dräger Compressed air breathing apparatus PSS 7000 With universal cylinder strap for single cylinders and for two cylinders. Weight: approx. 4,5 kg Compressed air breathing apparatus PSS 7000 with pressure gauge QC With standard cylinder strap for single cylinders. Weight: approx. 4,5 kg Compressed air breathing apparatus PSS 7000 with Bodyguard II QC With cylinder quick-connect and standard cylinder strap for single cylinders

5 Breathing apparatus, Dräger Compressed air breathing apparatus PSS 7000 with Bodyguard 7000 Universal With universal cylinder strap for single cylinders and for two cylinders Compressed air breathing apparatus PSS 7000 with Bodyguard 7000 With standard cylinder strap for single cylinders Compressed air breathing apparatus PSS 7000 with Bodyguard 7000 QC With cylinder quick-connect and standard cylinder strap for single cylinders

6 Breathing apparatus, Dräger Compressed air breathing apparatus PSS 5000 The new generation of efficient compressed air breathing apparatus designed for fire fighting and emergency service. Optimum ergonomics and many possibilities of configuration. Features: ergonomic carrying system solid and relieving bands integrated and variable guiding of the medium pressure and high pressure hose line Available in 2 types: Dräger-Standard (DS), the basic version for the constant application provides high comfort and long service life, Dräger-Professional (DP) is made of materials withstanding the high demands of daily use with maximum comfort and increased functionality. Thanks to stainless steel buckles and heavy-duty aramide fabric the DP-type is suitable for tough and frequent use under extreme conditions Compressed air breathing apparatus PSS 5000 DP With single cylinder strap. Approval acc. to EN 137:2006 type 2 and vfdb 08/02. With pressure gauge. Turnable and swivel-type lap belt for high mobility. Particular ease of maintenance thanks to snap closures at the bands and pressure reducer. The hoses fully integrated in the back plate provide high protection and reduced risk of getting caught. Dräger Professional (DS) bands for high resistance thanks to reinforced padding, plastic buckles and heavy-duty materials. Technical data: inlet pressure: bar output pressure 1st stage: 7,5 bar air supply output 1st stage: > 1000 l/min regulator valve air supply output: > 400 l/min warning whistle activating pressure: bar warning whistle loudness: > 90 dba weight: approx. 4 kg (back plate and carrying system) Compressed air breathing apparatus PSS 5000 DP* Like art. no , however, with universal strap Compressed air breathing apparatus PSS 5000 DP with Bodyguard Like art. no , however, with Bodyguard Compressed air breathing apparatus PSS 5000 DP with Bodyguard, universal strap Like art. no , however, with universal strap and Bodyguard Compressed air breathing apparatus PSS 5000 DS* With single cylinder strap. Approval acc. to EN 137:2006 type 2 and vfdb 08/02. With pressure gauge. Turnable and swivel-type lap belt for high mobility. Particular ease of maintenance thanks to snap closures at the bands and pressure reducer. The hoses fully integrated in the back plate provide high protection and reduced risk of getting caught. Dräger Professional (DS) bands for high resistance thanks to reinforced padding, plastic buckles and heavy-duty materials. Technical data: inlet pressure: bar output pressure 1st stage: 7,5 bar air supply output 1st stage: > 1000 l/min regulator valve air supply output: > 400 l/min warning whistle activating pressure: bar warning whistle loudness: > 90 dba weight: approx. 3,85 kg (back plate and carrying system) Compressed air breathing apparatus PSS 5000 DS* Like art. no , however, with universal strap

7 Breathing apparatus, Dräger Compressed air breathing apparatus PSS 5000 DS with Bodyguard Like art. no , however, with Bodyguard Compressed air breathing apparatus PSS 5000 DS with Bodyguard* Like art. no , however, with universal strap and Bodyguard Compressed air breathing apparatus PSS 3000 This new compressed air breathing apparatus features uncomplicated handling, high wearing comfort as well as low weight and solid design. Characteristics: ergonomic, light-weight and high wearing comfort proven pneumatic components of the PSS-series integrated hose guiding for medium pressure- and high-pressure lines easy cleaning and maintenance reliable system components Compressed air breathing apparatus PSS 3000 with manometer, Dräger* Bodyguard 1000 with push button, Dräger Thanks to the high warning effect the compact and light-weight Dräger Bodyguard 1000 provides at motionlessness considerably increased safety at use of all breathing apparatus without electronic control unit or detached, e.g. at works in sewers. Features: approved acc. to PSA/EN 137 blue position LED improve the visual contact between the crew members red flash LED and 112 dba loudness in the main alarm facilitate considerably localization in case of an emergency low maintenance: only the batteries (~ 365 h monitoring time) have to be exchanged as needed additional functions: integrated data logger and individual adjustment of the operating modes via PC interface dim. (HxWxD): approx. 100x70x40 mm weight: approx. 215 g Bodyguard 1000 with push button, Dräger* Like art. no , however, with push button

8 Breathing apparatus, Dräger Compressed air breathing apparatus PSS 100 Basic apparatus of ergonomic light carbon composite backplate with optimum carrying position close to the bodys centre of gravity. Flameproof high-temperature comfort harness with Kevlar-liner and wide shoulder and hip paddings for optimum weight distribution. Can be easily unbuttoned for cleaning. The paddings can be exchanged individually. The hip belt swivels and slides with the wearer and is provided with lateral pull for force-locking adjustment. Universal cylinder fastening strap (high-temperature version) for all standard types of cylinders and cylinder combinations. With elastic cylinder support and centre positioning for 2-cylinder sets. Shoulder fork with fixed non-twist shoulder belts, adjustable to individual body heights. The medium pressure line for the lung demand valve with quick-acting safety coupling is lead over the shoulder and is easy to operate on the right (optionally left) shoulder belt. Flexibly mounted pressure reducer for quick adaptation of the compressed air cylinders. Air supply > 1000 l/min, sufficient for 2 persons. Can be provided optionally with adaptor with non-return valve for a second lung demand valve or hose supply and/or optional direct fill connection 300 bar. Requires lung demand valve with long medium pressure line. Without cylinder and without lung demand valve. Weight: approx. 4,5 kg DrägerMan PSS 100 basic unit (pressure gauge) Compressed air breathing apparatus - basic unit incl. pressure gauge DrägerMan PSS 100 basic unit with Bodyguard II* Compressed air breathing apparatus - basic unit incl. Bodyguard II. Weight: approx. 4,7 kg Compressed air breathing apparatus PSS 90 Basic unit of ergonomic light carbon composite backplate with optimum carrying position close to the bodys centre of gravity. Flameproof high-temperature comfort harness with Kevlar-liner and wide shoulder and hip paddings for optimum weight distribution. Can easily be unbuttoned for cleaning. The paddings can be exchanged individually. The hip belt swivels and is provided with lateral pull for force-locking adjustment. Universal cylinder fastening strap (high-temperature version) for all standard types of cylinders and cylinder combinations. With elastic cylinder support and centre positioning for 2-cylinder sets. Flexibly mounted pressure reducer for quick adaptation of the compressed air cylinders. Air supply > 1000 l/min, sufficient for 2 persons. Can be provided optionally with adaptor with non-return valve for a second lung demand valve or a hose supply and/ or optionally provided with direct fill connection 300 bar. Long medium pressure line on basic unit with quick acting safety coupling, easy to operate on the right (optionally left) shoulder belt. Requires lung demand valve with short medium pressure line. Without cylinder and without lung demand valve. Weight: approx. 4 kg Compressed air breathing apparatus PSS 90, Dräger Compressed air breathing apparatus - basic unit incl. pressure gauge DrägerMan PSS 90 basic app. with Bodyguard II Compressed air breathing apparatus - basic unit incl. Bodyguard II. Weight: approx. 4,2 kg

9 Breathing apparatus, Dräger DrägerMan Bodyguard II Fully electronic signal and warning unit for the compressed air breathing apparatus Dräger PSS 7000, DrägerMan PSS 500, PSS 100, PSS 90, PA 94 up and PA 80. Automatic activating of the following functions when the cylinders are opened: Automatic function test (sensors, battery, display as well as acoustic and visual signaling systems): Digital pressure reading, illumination of display, acoustic and visual warning signals. Activating and deactivating of additional functions automatically or via control key. Choice of cylinder, short test before use, input of a user identification, digital and analogous reading of the cylinder pressure, reading of remaining time before the warning signal of the remaining pressure sounds at 50 % cylinder pressure. Permanent warning signal at a cylinder pressure of 55 bar (visual and acoustic), permanently flashing light, automatic alarm in case of inaction (with prealarm), manual panic alarm, push button for temperature reading, datalogging. The data can be read via an IR port on a PC. When ordering the following individual configurations can be chosen: 1. Activation of the additional functions automatically or by means of control key. 2. Selection of cylinders: 6 l/300 bar (standard) and/or 6,8 l/300 bar and/or 2x 4 l/200 bar and/or 2x 6 l/300 bar and/or 2x 6,8 l/300 bar. 3. Warning signal at 50 % cylinder pressure (without reserves) switched on (standard) or switched off. 4. Possibility for showing and input of a user identification switched off (standard) or switched on. Bodyguard II with loud alarm signal, the first remaining pressure warning by means of stroboscopic flash, second independent remaining pressure warning by means of mechanical whistle, improved pressure sensor, inaction alarm can be deactivated, automatic activation of the unit when the cylinder is opened Bodyguard 7000, Dräger The fully electronic signalling and warning unit for the compressed air breathing apparatus Dräger PSS With power supply and electronics used as transmitter for a head-up display (optional). Automatic activation of the following functions when opening the compressed air cylinders: automatic function test: sensors, battery, display as well as the acoustic and visual signalling units digital pressure indication lighting of display acoustic and visible warning signals selection of the cylinders short test before action entry of a user identification via personal identity card (RFID) digital and analogous indication of the cylinder pressure indication of the remaining duration until you hear remaining pressure warning electronic warning signal from 55 bar cylinder pressure (visual and acoustic) position flashlight automatic alarm at motionlessness (with pre-alarm) manual emergency call alarm data recording (data logger). The data can be read via an interface at a PC. The following individual configuration possibilities can be chosen for connection at ordering: 1. Automatic activation of the Bodyguard 7000 at turning on the cylinder (standard configuration) or activation by pulling the key. 2. Selectable cylinders: 6 l/300 bar (standard configuaration) and/or 6,8 l/300 bar and/or 2 pc. 4 l/200 bar and/or 2 pc. 6 l/300 bar and/or 2 pc. 6,8 l/300 bar and/or 9 l/300 bar permanent mechanic warning signal at pressure reducer 481

10 Breathing apparatus, Dräger Dräger lung demand valves and accessories Small, light-weight and low noise in operation. Housing of impact-proof plastics, bonded with non-slip silicone protective cover. Reliable body, easy to maintain. Approved with all Dräger compressed air breathing apparatus of the product lines PSS, PA 94 UP, PA 80 UP Lung demand valve PSS-N, Dräger Normal pressure round thread connection acc. to EN 148-1, with short hose. Weight: approx. 0,4 kg Lung demand valve PSS-AE, Dräger Excess pressure plug connection M 45 x 3 acc. to EN 148-3, with short hose. Weight: approx. 0,4 kg Lung demand valve PSS-A, Dräger Dräger excess pressure plug connection with short hose. Weight: approx. 0,4 kg Lung demand valve PSS-ESA, Dräger Excess pressure uniform plug connection acc. to DIN with short hose. Weight: approx. 0,4 kg Lung demand valve PSS-N with 1,75 m hose, Dräger Normal pressure round-thread connection acc. to EN Approved for rescue purposes. (At use of a second lung demand valve only the normal pressure type is approved). Weight: approx. 0,5 kg Adaptor for connection of a second lung demand valve Adaptor with non-return valve for a second lung demand valve. For retrofit of the compressed air breathing apparatus PSS 90, PSS 100 and PA 94 Plus Adaptor for connection of a second lung demand valve Hose with connection possibility for a second lung demand valve or the PSS rescue hood. Suitable for compressed air breathing apparatus PSS Retrofitting compressed air breathing apparatus Upgrade set I PSS-pneumatic with Bodyguard II To upgrade the compressed air breathing apparatus PA 94 D to PA 94 UP and PA 80/90 respectively PA 80 to PA 80 UP. Scope of supply: medium pressure hose, long (PSS 90/100) fixing material for PA 94 D, PA 80, PA 80/90 new type plate (PA 94 UP and PA 80 UP) DrägerMan Bodyguard II (B II) Upgrade set II PSS-pneumatic with manometer To upgrade the compressed air breathing apparatus PA 94 D to PA 94 UP and PA 80/90 respectively PA 80 to PA 80 UP. Scope of supply: PSS pressure reducer medium pressure hose, long (PSS 90/100) fixing material for PA 94 D, PA 80, PA 80/90 new type plate (PA 94 UP and PA 80 UP) pressure gauge with completely persistent dial injectorless warning whistle integrated in the protective cap of the pressure gauge the combination line for medium pressure to warning whistle and integrated high pressure line for manometer is lead over the shoulder

11 Breathing apparatus, Dräger Upgrade set III PSS 100, carrying system complete To upgrade the compressed air breathing apparatus PSS 90, PA 94 UP, PA 80 UP to PSS 100. Scope of supply: PSS 100 backplate PSS 100 high temperature harness Nomex/Kevlar new type plate (PSS 100) Upgrade set IV PSS 90, carrying system complete for changing the apparatus PA 80 to PSS 90. Scope of supply: PSS 90 backplate PSS 90 high temperature harness Nomex/Kevlar new type plate (PSS 90) Upgrade set V PSS 90, high temperature harness To upgrade the compressed air breathing apparatus PA 94 UP to PSS 90. Scope of supply: PSS 90 high temperature harness Nomex/Kevlar new type plate (PSS 90)

12 Breathing apparatus, Dräger Upgrade set VI medium pressure hose To upgrade the compressed air breathing apparatus PA 94 plus to PSS 90. Scope of supply: medium pressure hose long (PSS 90/100) new type plate (PSS 90) Upgrade set VII medium pressure hose Medium pressure hose long (PSS 100/90) with screw thread to upgrade the compressed air breathing apparatus PA 94 D to PA 94 HP for use with the PSS lung demand valve RAT pressure reducer for PA 94 Plus and PSS 90 Exchange pressure reducer against return of the old pressure reducer. The used part has to be returned within four weeks RAT pressure reducer for PA 90 and PA 94 Exchange pressure reducer against return of the old pressure reducer. The used part has to be returned within four weeks RAT LA-dosing valve excess pressure Dosing valve for Dräger PSS excess pressure lung demand valve substitutional. The used part has to be returned within four weeks RAT LA-pressure valve normal pressure Dosing valve for Dräger PSS normal pressure lung demand valve substitutional. The used part has to be returned within four weeks PA90 RAT-set PSS 100 Pneumatic PSS Pneumatic with pressure gauge substitutional. For retrofit of the compressed air breathing apparatus PA 94 D to PA 94 UP and PA 80/90 respect. PA 80 to PA 80 UP. Scope of supply: PSS pressure reducer Medium pressure hose long (PSS 90/100) Type plates PA 94 UP respect. PA 80 UP Pressure gauge with completely persistent dial Injectorless warning whistle integrated in the protective cap of the pressure gauge Combination line led over the shoulder for medium pressure to the warning whistle and integrated high pressure line for the pressure gauge Adaptor 200 bar for Dräger compressed air breathing apparatus PSS 100, PSS 90, PA 94 Plus and PA 94 D as well as PSS 7000 versions SH (small hand wheel). With 2 high pressure connections (hand wheels) for fixing of 2 steel cylinders 4 l/200 bar. Weight: approx. 0,4 kg Adaptor 300 bar for Dräger compressed air breathing apparatus PSS 7000, PSS 100, PSS 90, PA 94 Plus and PA 94 D. With 2 high pressure connections (hand wheels) for fixing of 2 CFK cylinders 6 l or 6,8 l/300 bar. Weight: approx. 0,4 kg

13 Breathing apparatus, Dräger Safety bags Safety bag GEARBAG* For taking of a BA-unit. (The second velcro is placed without imprint in the bag.) Aluminium die-casting rolls provide easy transport by only one fire fighter without effort. All-around padding for protection of BAmask, lung demand valve and BA-unit. Auxiliary holders for fire fighter axe or Halligan tool keep free the hands of the fire fighter crew. Various inside and outside pockets provide clear space for rescue blanket and sling, rescue hoods, etc. BA unit pocket: 67 l with triple belt BA-holder. Zipper cover pocket, lateral mesh pockets. Mask pocket: 13 l with mesh pocket. Zipper outside pocket (WxH): approx. 450x190 mm. Removable yellow label 450x80 mm SICHERHEITSTRUPP, additional removable yellow label 450x80 mm for individual lettering. Lateral reflecting stripes, fire fighter axe holder, aluminium die-casting rolls and grip for transport by one person, four heavy-duty carrying handles. Abrasion-resistant material: 1200D polyester FR, total volume: 80 l, dim. (LxWxH): approx. 770x350x300 mm, weight: approx. 4,6 kg Safety bag GEARBAG with 2. velcro strip imprinted* Like art. no , however, with 2. velcro strip imprinted Velcro strip of polyester, suitable for GEARBAG* Colour yellow. Print in black, only possible single-spaced, however, as specified individually by customer, e.g. FF GIENGEN. Face masks, Dräger Dräger respirator masks with accessories PANORAMA-NOVA full face masks Inner face mask with control valves, each with skin compatible, especially rugged and refined rubber compound EPDM. Easily adjustable 5-point bands and practical neckstrap. Excellent visual field thanks to wide concave pane, one piece, of extremely flexible, impact and heat-resistant polycarbonate, clamped in stainless steel frame. Plastic connection piece, one part, with patented plug-type connection. With stainless steel talking membrane for excellent communication. Tested acc. to EN Full face mask Panorama Nova RA PC, Dräger With normal pressure round-thread connection RD 40 mm x 1/7" acc. to EN Weight: approx. 0,6 kg Full face mask Panorama Nova PE PC, Dräger With excess pressure screw-type connection M 45x3 acc. to EN Weight: approx. 0,6 kg 485

14 Face masks, Dräger Full face mask Panorama Nova P PC, Dräger With Dräger-excess pressure plug-type connection. Weight: approx. 0,6 kg Full face mask Panorama Nova ESA PC, Dräger With uniform plug-type connection of the German Fire Brigade acc. to DIN Weight: approx. 0,6 kg Face mask Panorama Nova Supra RA PC, Dräger With mounted adaptors for combination with Dräger-helmets HPS 6200 and HPS 6100, with normal pressure round-thread connection RD 40 mm x 1/7" acc. to EN Weight: approx. 0,6 kg Face mask Panorama Nova Supra PE PC, Dräger With mounted adaptors for combination with Dräger-helmets HPS 6200 and HPS 6100, with screw-type connection M 45 x 3 acc. to EN Weight: approx. 0,6 kg Face mask Panorama Nova Supra P PC, Dräger With mounted adaptors for combination with Dräger-helmets HPS 6200 and HPS 6100, with Dräger-excess pressure plug-type connection. Weight: approx. 0,6 kg Face mask Panorama Nova Supra ESA PC, Dräger With mounted adaptors for combination with DRÄGER-helmets HPS 6200 and HPS 6100, with uniform plug-type connection of the German Fire Brigade acc. to DIN Weight: approx. 0,6 kg Dräger full face mask FPS 7000 The personal breathing connection for highest demands concerning fitting and wearing comfort. Mask body with proven double sealing frame for absolutely tight and comfortable fitting. Inner face mask with control valves. Mask body of resistant, skin compatible rubber compound EPDM (Ethylene-Propylene-Dien-Monomer). Inner face mask of TPE. Easily adjustable 5-point bands and practical neckstrap. Excellent visual field thanks to the pane of extremely flexible, impact and heat-resistant polycarbonate, clamped in GRP frame. No steaming up thanks to optimum aeration. Tested acc. to EN Face mask FPS 7000 RA-EPDM-M2-PC-CR, Dräger With normal pressure round-thread connection RD 40 mm x 1,7" acc. to EN 148-1, size M2. Weight: approx. 0,6 kg Face mask FPS 7000 PE-EPDM-M2-PC-CR, Dräger With excess pressure screw-type connection M 45 x 3 acc. to EN 148-3, size M2. Weight: approx. 0,6 kg Face mask FPS 7000 P-EPDM-M2-PC-CR, Dräger With Dräger-excess pressure plug-type connection size M2. Weight: approx. 0,6 kg Other sizes are available on request!

15 Face masks, Dräger Face mask FPS 7000 ESA-EPDM-M2-PC-CR, Dräger With uniform plug-type connection of the German Fire Brigade acc. to DIN 58600, size M2. Weight: approx. 0,6 kg Accessories Carrying box WIKOV V of plastics For mask Panorama Nova and filter with adjustable bands. Oval. Dim. (WxHxD): approx. 240x120x270 mm, weight: approx. 0,5 kg Carrying box MABOX I for F2 and FPS face masks Of plastics, with adjustable harness. Dim. (WxHxD): approx. 305x264x184 mm, weight: approx. 0,7 kg Carrying box MABOX II of plastics For masks F2, FPS 7000, small size. With adjustable bands. Dim. (WxHxD): approx. 240x264x164 mm, weight: approx. 0,6 kg Mask box for FPS-Box of plastics For mask FS 7000, with adjustable bands. Dim. (WxHxD): approx. 360x190x190 mm, weight: approx. 0,6 kg Box for respiratory masks PROTEX of cotton Of flame-retardant cotton, for masks Panorama Nova, F2 and FPS 7000 as well as for masks X-Plore 5000 and Spectacle frame for Panorama Nova, without optical glasses With case Mask goggles for FPS 7000, Dräger For inserting in the masks FPS Without optical glasses Spectacle frame for F2 + Futura without optical glasses With case Holster RESPI For taking of a full face mask. Of polyester, colour blue, with fluorescent strips yellow-silver-yellow. Replaces the carrying box of plastics. Completely padded, with spectacle case for securing the private glasses, with mesh inside pocket, holder for protective hood in cover, infinitely adjustable dual carrying strap for wearing as hip or shoulder bag. With Vario velcro straps for fixture at Kombi-canvas bag. Dim. (LxWxH): approx. 260x190x170 mm Rescue pack system RPS 3500, Dräger For use in rescue crew acc. to FwDV 7. Provides independent supply of breathable air at salvage and during decontamination. Consisting of an especially compact pressure reducer which will be connected directly with the breathing air cylinder, a medium pressure hose with strain relief, a special Y piece as distributor as well as a solid and padded bag. External dim. (LxWxH): approx. 750x170x290 mm, weight: approx. 6 kg Rescue hood PSS, Dräger For rescue of persons from hazardous areas. The hood can be put on easily and can be used by any person independent from face shape and size. Fits also well for spectacle wearers and bearded men. Can be used in connection with any breathing apparatus independent from air circulation being provided with a second hose connection and approved acc. to EN 137. Completes usefully the Dräger RPS 3500 rescue pack system. Incl. velcro bag

16 Face masks, Dräger Adaptor ESA M 45x3/ESA For use of Dräger respirator masks with excess pressure screw-type connection and with excess pressure lung demand valves with standard plug connection ESA or breathing filter with normal pressure threaded connection RD 40 mm x 1/7" Combination filter type 1140, A1B2E2K1HGNOCO20P3 R D Against organic and inorganic gases and vapours, sulfur dioxide, mercury vapours, ammonia, carbon monoxide, nitrous gases and particles. With round thread connection acc. to EN Weight: approx. 0,4 kg Filter type 1140, A2B2E2K2HGP3 R D Against organic and inorganic gases and vapours, sulfur dioxide, mercury vapours, ammonia and particles. With round thread connection acc. to EN Weight: approx. 0,4 kg Filter Type 620, A2B2E2K2HGP3 E D Like art. no , however, suitable for respirator masks with excess-pressure screw-type connection M 45 x 3 (EN 148-3). Weight: approx. 0,4 kg Other filters are available on request! Anti-mist agent Klar-Pilot (50 ml) Environment-friendly cleaning agent, harmless to health, for all Dräger lenses. Without silicon or alcohol. With long-term effect. Klar-Pilot is antistatic and prevents fogging of the lens and spectacles also in case of extreme temperature fluctuations Anti-mist agent gel Klar-Pilot (50 ml)* Like anti-mist fluid, only gel Compressed air cylinders Dräger compressed air cylinders with accessories Compressed air cylinders acc. to DIN 3171, with impact-secured cylinder valve acc. to EN 141, G 5/8" straight, with locking screw and TÜV-approval Compressed air cylinder 6 l/300 bar, of steel, light Dia. approx. 140 mm, length with valve approx. 605 mm. TÜV-checking every 5 years. Service life unlimited. Weight: approx. 9,8 kg (filled) Compressed air cylinder 6 l/300 bar, of steel, light Like art. no , however, with flow-off lock Compressed air cylinder 6 l/300 bar, of CFK Dia. approx. 152 mm, length with valve approx. 581 mm. TÜV-checking every 5 years. Service life 20 years. Weight: approx. 6,5 kg (filled) Compressed air cylinder 6 l/300 bar, of CFK, with flow-off protection Like art. no , however, with flow-off lock

17 Compressed air cylinders Compressed air cylinder 6,8 l/300 bar, short, of CFK Dia. approx. 156 mm, length with valve approx. 600 mm. TÜV-checking every 5 years. Service life 15 years. Weight: approx. 7,1 kg (filled) Compressed air cylinder 6,8 l/300 bar, short type, of CFK Like art. no , however, with flow-off lock Compressed air cylinder 6,8 l/300 bar, of CFK Dia. approx. 156 mm, length with valve approx. 637 mm. TÜV-checking every 5 years. Service life 20 years. Weight: approx. 7,1 kg (filled) Compressed air cylinder 6,8 l/300 bar, of CFK Like art. no , however, with flow-off lock Compressed air cylinder 4 l/200 bar, of steel Dia. approx. 115 mm, length with valve approx. 585 mm. TÜV-checking every 5 years. Service life unlimited. Weight: approx. 6,1 kg (filled) Test pressure gauge bar For testing of the cylinder pressure of compressed air cylinders PROTEX cylinder protective cover For protection of CFRP compressed air cylinders 6,8 l and 6 l as well as steel cylinder 6 l. Colour dark blue Accessories for breathing apparatus, Dräger Dräger escape hoods Dräger Parat C - for special protection against inhaling of dangerous fire gases, e.g. hydrocyanic acid and odourless carbon monoxide at fire. Use e.g. in hospitals, hotels, homes for old people and industrial buildings for self-rescue or also for rescue by other people. Quick and simple application. Protection for minimum 15 min by the CO-P2 filter integrated in the escape hood. Tested acc. to EN 403. Maintenance-free for 6 years. Replacement of filter after 6 years. Total service life: 12 years Escape hood PARAT C, single pack In sealed cardboard. Pack size (HxLxW): approx. 80x190x135 mm, weight: approx. 0,6 kg Escape hood PARAT C, twin-pack Two escape hoods in transparent wall box. Pack size (HxLxW): approx. 90x330x225 mm, weight: approx. 1,5 kg Escape hood PARAT C, soft-pack In handy case. Pack size (HxLxW): approx. 80x190x135 mm, weight: approx. 0,6 kg 489

18 Accessories for breathing apparatus, Dräger Escape hood PARAT C, pack for the fire brigades* Consisting of: 2 Parat C single-pack (art. no ) and 1 carrying bag (art. no ). Pack size (HxLxW): approx. 100x320x235 mm, weight: approx. 1,4 kg Escape hood PARAT C, traveller-pack In compact plastic housing. Pack size (HxLxW): approx. 80x190x135 mm, weight: approx. 0,6 kg Carrying bag for two PARAT C, single or traveller pack Signal colour. With adjustable shoulder belt and velcro fastener Wall holder for PARAT C, for traveller pack With persistent pictograph Carrying strap PARAT C, for traveller and single pack For carrying on belt Spare parts kit for PARAT C Includes CO-P2 filter and breathing valve Respiration control devices Dräger monitoring equipment Immobility alarm Diktron DSX MK II Automatic ermergency signal unit for the person wearing the compressed air breathing apparatus with multiple warning function: automatic alarm in case of immobility (pre- and main alarm) manual activation in emergencies and in case of withdrawal regular reminder that the remaining air must be checked automatic alarm when battery capacity is low continuously by position flash. Diktron DSX MK II is ex-proof and can easily be fixed on the shoulder or hip belt of the compr. air breathing apparatus. Weight: approx. 0,45 kg Control board breathing protection REGIS 300 For up to 3 teams with each up to 3 wearers. The solid part is provided with three illuminated display short-time clocks with clear minute indication (count down). An internal electronic sensor alerts with a clearly audible permanent signal tone if the intervention teams have to be back from the intervention, i.e. adjusted intervention time is up. Standard intervention time is adjusted on 30 minutes. Change to 60 or 90 minutes by select buttons is possible or the adjustment of individually desired time up to 240 minutes. Acoustic and visual inter-alerts 490

19 Respiration control devices according to FWDV 7 at 2/3 and 1/3 of time. Blotting pad with firmly grouped lettering fields marked with international comprehensible symbols. Up to nine individual name tags for lettering can be fixed by snap hook underneath the control board. With DIN A4 plastic wrap (can be lettered by attached marker). Without name tags, without snap hooks. Dim. (WxHxD): approx. 345x400x45 mm, weight: approx. 1,5 kg Control board breathing protection REGIS 500 The fully electronic digital monitoring board for up to 3 teams, each with up to 3 wearers of breathing apparatus. The board continuously shows the remaining working time of the teams. Scope of supply: monitoring board with digital clock (in the carrying grip), pad for mounting on a vehicle, 2 transparent foils for written notes to be clipped to the board, marker for writing on the foil. 9 V block battery. Protection class IP 54. Dim. (WxHxD): approx. 240x230x58 mm, weight: approx. 1 kg Transmitting module for REGIS 500 For mounting on the monitoring board REGIS 500. When the transmitting module is installed all alarm signals are transmitted to the external signaller (option). (Range of transmission from board to external signaller 40 m.) External signaller for REGIS 300/500 With integrated receiver. External flashlight coupled with loud alternating signal. Several REGIS boards 300/500 can transmit alarm signals to an external signaller. Confirmation of the alarm signals is made on the control board. Condition, however, is that the control board REGIS 500 is provided with the transmitting module, art. no (already included in scope of supply REGIS 300) Coded plugs normal time for REGIS 500 For use with compressed air breathing apparatus. The board recognizes automatically the time available for the intervention. The time is adjustable within pre-set limits. Definition: normal time respect. short-time compressed air breathing apparatus, 30 min. Colour red. Set of 10 pcs Coded plugs long time for REGIS 500 For long time use with breathing apparatus. The board recognizes automatically the time available for the intervention. The time is adjustable within pre-set limits. Definition: long time respect. circulation compressed air breathing apparatus, 120 min. Colour: blue. Set of 10 pcs Name tags yellow for REGIS 300/500 Of Duroplastic plastics. With snap hook. For identification of the breathing apparatus in use (for long-time compressed air breathing apparatus) Name tags red for REGIS 300/500 Of Duroplastic plastics. With snap hook. For identification of the breathing apparatus in use (for normal time respect. short time compressed air breathing apparatus). Set of 10 pcs Name tags blue for REGIS 300/500 Of Duroplastic plastics. With snap hook. For identification of the breathing apparatus in use (for long time respect. circulation compressed air breathing apparatus). Set of 10 pcs Detector for persons FRT 1000, Dräger For localization of missed rescue workers or for self-rescue at disorientation in worsening of working conditions. Technical data: Frequency: 457 khz, body material: polycarbonate (black), range: average 30 m, display: LED, operating temperature range: -20 up to +80 C, max. heat resistance: 260 C for 5 min. Corresponds with the demands acc. to IP 54. Incl. plug On/Off (2 pcs.), bracket for extendible carrying strap, 3 pcs. Alkali batteries type AAA, instructions. Dim. (LxWxH): approx. 140x80x30 mm, weight: approx. 0,2 kg without batteries 491

20 Respiration control devices Bag for detector FRT 1000, Dräger Cord extendible for detector FRT 1000, Dräger Spring-loaded, for securing of the FRT 1000 during the action Detector for persons ETR 1000, Dräger Supports self-rescue of disorientated fire fighters (can only be used in connection with the Dräger FRT 1000). Technical data: Frequency: 457 khz, body material: polycarbonate (black), range: average 20 m, operating temperature range: -20 up to +80 C, max. heat resistance: 260 C for 5 min. Corresponds with the demands acc. to IP 54. Incl. 2 pcs. Alkali batteries type AAA and instructions. Dim. (LxWxH): approx. 125x95x30 mm, weight: approx. 0,159 kg without batteries Testing devices Dräger test units Test unit Testor 3100, Dräger PC controlled tester for compressed air breathing apparatus, lung demand valves, full face masks and chemical protective suits. Consisting of Testor with integrated electronics and appliance software. Operation instruction, external high pressure sensor, USB cable for energy and data supply. For operation of the Testor 3100 PC, display and printer are required. Compressed air supply 4 up to 10 bar. Dim. (WxHxD): approx. 515x335x300 mm, weight: approx. 5 kg Tester Prestor, Dräger PC controlled tester for respirator masks, consisting of basic unit, operating systems, mains cable, connection cable for PC. For operation of Prestor PC, display and printer are required. Compressed air supply 5 up to 9 bar. Dim. (WxHxD): approx. 500x450x300 mm, weight: approx. 15 kg Accessories for Testor 3100/Prestor Screw clamp for Testor For fixing a test head or the test units Testor and Prestor on the work surface (2 pcs. are required for Prestor) Medium delivery hose for connection Testor For connection of the tester Testor with a stationary medium pressure pipe. With female MD coupling and open hose end. Length: approx mm 492

21 Testing devices Medium pressure hose for connection Testor For connection of the tester Testor with a pressure reducer of compressed air breathing apparatus at compressed air supply of the compressed air breathing apparatus Medium pressure shut-off valve for tester Testor Sensor connection 300 bar Connects the sensor with the T-piece 300 bar Sensor connection 200 bar Connects the sensor with the T-piece 200 bar Pedal switch for tester Prestor Provides start of checking without use of the computer keyboard Full face mask testing device TEST-IT 4100 Mobile testing device for full face masks, in solid aluminium case. The testing device includes an inflatable probe, a clamp and a digital stopwatch. Dim. (LxWxH): approx. 460x340x170 mm, weight: approx. 6,5 kg Accessories for lung demand valve checking Test piece PE for Testor For connection of a lung demand valve with excess pressure screwtype connection M 45 x Test piece P for Testor For connection of a lung demand valve with excess pressure plugtype connection P to round thread Test piece ESA for Testor* Additionally required for adaptor, art. no Stopper 9/20 DIN for Testor Cone-shaped, for sealing the lung demand valve medium pressure line during the low pressure test. Accessories for mask checking Plug RA for Testor For normal pressure mask with round breathing valve for tight fitting of the lung demand valve connection Plug P/PE/RP for Testor For excess pressure mask with round breathing valve for tight fitting of the lung demand valve connection Valve plug RA for Testor For closing of the breathing valve of normal pressure masks with round breathing valve

22 Testing devices Valve plug P/PE/ESA for Testor For closing of the breathing valve of excess pressure masks. Accessories for CSA-checking Test cap 30 mm for Testor For plugging on the pressure relief valves of the chemical protection suit and connection with the test and fill hose after removal of the valve plates (2 pcs. are required) Test cap 35 mm for Testor For plugging on the pressure relief valves of the chemical protection suit and for connection with the test respect. fill hose after the valve plates have been removed (2 pcs. are required) Sealing disc for Testor (set of 2), for sealing relief valves of chemical protection suits during leakage test Valve test socket 30 mm for Testor For the low pressure tightness test of the valves for chemical protective suits 30 mm, consisting of rubber plug and hose socket Valve test socket 35 mm for Testor For the low pressure tightness test of the valves for chemical protective suits 35 mm, consisting of rubber plug and hose socket Compressed air pistol for Testor For filling of chemical protection suit Hose clamp for Testor For clamping off the compressed air pistol after having filled the chemical protection suit (2 pcs. are required) Testing hose for Testor* For connection lung demand valve-adaptor to CSA testing cap. Length: approx. 2,5 m

23 Respiratory equipment, Dräger Respiratory equipment, Dräger Dräger communication systems Communication system Dräger FPS-COM Completely integrated mask communication system for Dräger full face masks FPS 7000, with radio unit and standard PTT cable. Included in scope of supply: two AAA batteries, ex-protected ATEX II 1 GD, EX ia IIC Ga T4, approved acc. to EN 136, cl. 3 and EN 137. COM control unit has to be ordered separately. At ordering the required connector (RA, PE, ESA or P) has to be stated Communication system Dräger FPS-COM-VA Completely integrated mask communication system for Dräger full face masks FPS 7000, with radio unit and standard PTT cable and voice amplifier for the direct environment. The scope of supply includes: two AAA batteries, ex-protected ATEX II 1 GD, EX ia II Ga T4, approved acc. to EN 136, cl. 3 and EN 137. COM control unit has to be ordered separately. At ordering the required connector (RA, PE, ESA or P) has to be stated Communication system Dräger FPS-COM-PTT Completely integrated mask communication system for Dräger full face masks FPS 7000, with radio unit and integrated PTT module (push to talk) for direct connection with Motorola walkie-talkies GP 360/FUG 11b. The scope of supply includes: two AAA batteries, ex-protected ATEX II 1 GD, EX ia II Ga T4, approved acc. to EN 136, cl. 3 and EN 137. COM control unit has to be ordered separately. At ordering the required connector (RA, PE, ESA or P) has to be stated Communication system Dräger MS-COM-FP-BOOM One loudspeaker especially for persons carrying respiratory equipment for combination with Dräger full face masks Panorama Nova and F2, fulfills the standard EN 136, cl. 3, ATEX/EEX IB IIC T4. With straight, flash-over tested cable. Suitable mask holder has to be ordered separately Mounting holder for Panorama Nova masks* Mounting holder for F2 masks* Communication system Dräger HC-1 COM/FP Compact and light-weight headset fitting with nearly any helmet. Provided with one sensitive bone microphone and one loudspeaker, with straight, flash-over tested cable with long microphone arm. ATEX approved EEX ia IIC T Control unit Dräger Com-Control 400 ML for Motorola walkie-talkie With extra-large and solid push-to-talk switch protected against accidental release. For combination with Dräger FPS-COM, MS-COM and HC-1 COM, with connector plug for Motorola walkie-talkie GP 360/FUG 11b. Protection class IP Control unit Dräger Com-Control 400 ML for Kenwood walkie-talkie With extra-large and solid push-to-talk switch protected against accidental release. For combination with Dräger FPS-COM, MS-COM and HC-1 COM, with connector plug for Kenwood walkie-talkie TK 290/FUG 11b. Protection class IP

24 Respiratory equipment, Dräger Control unit Dräger Com-Control 500 ML for Motorola walkie-talkie Innovative and solid control unit with integrated loudspeaker and microphone. For use with radio unit. Two large push-to-talk switches. For combination with Dräger FPS-COM, MS-COM and HC-1 COM, with connector plug for Motorola walkie-talkie GP 360/FUG 11b. Protection class IP Control unit Dräger Com-Control 500 ML for Kenwood walkie-talkie Innovative and solid control unit with integrated loudspeaker and microphone. For use with radio unit. Two large push-to-talk switches. For combination with Dräger FPS-COM, MS-COM and HC-1 COM, with connector plug for Kenwood walkie-talkie TK 290/FUG 11b. Protection class IP Respiratory protection Face mask driers Drier for face masks type FD 115 With enforced air circulation. Electronically controlled APT.line preheating chamber technology provides high temperature exactness and reproducible results. Temperature range 5 C via room temperature up to 300 C, DS controller with integrated clock timer 0 to 99 h. Digital temperature adjustment to the degree, temperature limiter class 2 (DIN 12880) with visual temperature alarm. Adjustable air exchange by frontally air flap adjuster and rear exhaust pipe dia. 50 mm. In the scope of supply two chrome-plated drawers for each three respirator masks are included. Maximum storage: 6 respirator masks. Technical data: nominal voltage: 230 V/50/60 Hz, nominal output: 1,6 kw, protection class: IP 20, number of doors: 1. Inside dimension (WxHxD): approx. 600x480x400 mm, outside dimension (WxHxD): approx. 834x702x645 mm, weight: approx. 62 kg Drier for face masks type FD 240 Like art. no , however, maximum storage: 18 respirator masks. In the scope of supply 2 chrome-plated drawers for each 8-12 respirator masks are included. Technical data: nominal voltage 230 V/50/60 Hz, nominal output: 2,7 kw, protection class: IP 20, number of doors: 2. Inside dimension (WxHxD): approx. 800x600x500 mm, outside dimension (WxHxD): approx. 1034x822x745 mm, weight: approx. 96 kg Drawer for face mask drier type FD 115* (Grid) chrome-plated Drawer for face mask drier type FD 240* (Grid) chrome-plated. 496

25 Respiratory protection Cleaning and disinfection units Ultrasound cleaning appliance Sonorex Longlife RK 1028 CH For simultaneous cleaning and disinfection of 6 breathing masks in one go. Swing tub welded of titan stabilized stainless steel V4A rustproof 1.457, 2 mm strong. Capacity: 45 l. Drip-proof housing of stainless steel. Timer 1-15 min and permanency. With heating C, thermally adjustable. Power supply: 230 V/50/60 Hz, frequency: 35 khz, ultrasound top performance: 1200 W, HF performance: 300 W eff, heating performance: 1450 W, power consumption: 7,7 A, drain: ball cock G 1/2", left-hand side. External dimension (LxWxH): approx. 540x340x500 mm, swing tub inside (LxWxD): approx. 500x300x300 mm, weight: approx. 23,7 kg Basket insert K 28 CA for 6 breathing masks* Stainless steel. Mesh width 12,5x12,5 mm. Separating strip removable. Dim. (LxWxH): approx. 470x270x215 mm Lid D 28 C* Stainless steel, noise suppressing Basket insert K 28 CV for 3 breathing masks* Stainless steel. Mesh width 12,5x12,5 mm. Separating strip removable. Dim. (LxWxH): approx. 470x270x215 mm Ultrasound cleaning appliance Sonorex Longlife RK 1050 CH* For simultaneous cleaning and disinfection of 9 breathing masks in one go. Swing tub welded of titan stabilized stainless steel V4A rustproof , 2 mm strong. Capacity: 90 l. Drip-proof housing of stainless steel. Timer 1-15 min and permanency. With heating C, thermally adjustable. Power supply: 230 V/50/60 Hz, frequency: 35 khz, ultrasound top performance: 2400 W, HF performance: 600 W eff, heating performance: 1950 W, power consumption: 11,1 A, drain: ball cock G 1/2", left-hand side. External dimension (LxWxH): approx. 640x540x530 mm, swing tub inside (LxWxD): approx. 500x500x300 mm, weight: approx. 37 kg Basket insert K 50 CA for 9 breathing masks* Stainless steel. Mesh width 12,5x12,5 mm. Separating strip removable. Dim. (LxWxH): approx. 540x445x240 mm Basket insert K 50 CV for 6 breathing masks* Stainless steel. Mesh width 12,5x12,5 mm. Separating strip removable. Dim. (LxWxH): approx. 540x445x240 mm Lid D 1050 C* Stainless steel, noise suppressing Stammopur 24, 25 l can* Intensive cleaning and disinfecting concentrate, VAH-certified. EXAMsurveyed. Aldehyde-free, chlorine-free and phenol-free, bactericidal (incl. Tb-B.), fungicidal, limited virucidal (BVDV, vakzinia, HBV, HCV, HIV, H5N1), mild alkaline, ph 9,4 (1 %). Application 1-2 % Tickopur R 33, 25 l can* General purpose cleaner. EXAM-surveyed. For intensive cleaning of heavily soiled face masks. Mild alkaline, ph 9,9 (1 %). Gentle, with corrosion protection. Application 15 % Disinfectant Incidur, 2 l* Liquid concentrate for disinfection of breathing apparatus. Concentration 2 % at 15 min contact time. 497

26 Respiratory protection Disinfectant Incidur, 6 l* Liquid concentrate for disinfection of breathing apparatus. Concentration 2 % at 15 min contact time Disinfectant Incidur, 30 l* Liquid concentrate for disinfection of breathing apparatus. Concentration 2 % at 15 min contact time. Transport rack for compressed air cylinders acc. to GGVS Transport rack for 6 compressed air cylinders For safe storing of the cylinders during transport (e.g. on the way to workshop breathing protection). Thanks to the open design easy putting in or removal of the cylinders from the transport rack. Transport case of galvanized steel. Max. 6 compressed air cylinders 4 l/200 bar can be stored. Dim. (LxWxH): approx. 395x265x620 mm, weight: approx. 9,5 kg (without cylinders) Transport rack for 4 compressed air cylinders* For safe storing of the cylinders during transport (e.g. on the way to workshop breathing protection). Thanks to the open design easy putting in or removal of the cylinders from the transport rack. Transport case of galvanized steel. Max. 4 compressed air cylinders 6 l/300 bar can be stored. Dim. (LxWxH): approx. 330x320x665 mm, weight: approx. 9,5 kg (without cylinders) Transport rack for 4 CFK compressed air cylinders* For safe storing of the cylinders during transport (e.g. on the way to workshop breathing protection). Thanks to the open design easy putting in or removal of the cylinders from the transport rack. Transport case of galvanized steel. Max. 4 CFRP-compressed air cylinders 6,8 l respect. 6 l/300 bar can be stored. Dim. (LxWxH): approx. 360x350x680 mm, weight: approx. 9,8 kg (without cylinders) Transport rack for 2 CFK compressed air cylinders 6 l/300 bar Type Volk-System for safe storage of cylinders during transport (e.g. on the way to the workshop for respiratory equipment). Thanks to the open design easy putting in or removing of the compressed air cylinders from the carrying frame is possible. The basic element is designed for each two CFK compressed air cylinders 6,8 respect. 6 l/300 bar, each two carrying handles and one upper carrying handle are provided. The basic elements can be coupled by knurled screw retentions in groups of any size. The cylinder size is variable. Foam plastic cylinders are noiseless and absolutely safe stored in solid but nevertheless lightweight, shapely fire brigade red powder coated containers. Dim. (LxWxH): approx. 330x320x665 mm, weight: approx. 7,2 kg (without cylinders) Transport rack for 2 compressed air cylinders 4 l/200 bar* Like art. no Transport rack for 2 compressed air cylinders 6 l/300 bar* Like art. no

27 Thermal imaging cameras Thermal imaging cameras Thermal imaging cameras ZIEGLER/Active photonics Thermal imaging camera active hand-up hornet 160 B With binocular video display. For fire brigade use, safety tasks, controls and industrial inspections. A tripod can be mounted. Continuous power supply via external 24VCD interface (short-circuit proof). Via this interface it will be also possible to connect an external monitor, PC or a notebook. The camera family is provided with 5 different colour schemes for any kind of use: black hot, white hot, cold tracer and full colour mode in real time switching. The measuring temperature also will be shown in the display at any mode. Temperature indication up to 595 C. Thanks to the standard integrated SD card recorder, incl. 2 GB SD card records of approx. 4 hours video with real time stamp are possible. The data can be processed respect. filed at any customary PC or notebook by the PC adapter (card reader) supplied along with and the special software. Individual scenes, images etc. can be processed in any current formats (avi or.jpeg) for sending via or burning on CD/DVD. All functions of the camera family will be operated by only two easily accessible multi-function buttons. Consequently simple and quick operation of the camera in use. The energy conception of the camera family is highly superior to customary batteries thanks to the new battery technology Nanophosphat. The battery has a running time of approx. 7 hours, the charging condition of the camera will be indicated in the video image. The charging time for a complete charging at the digital charger supplied along with is approx. 60 min at approx load cycles. Contrary to other batteries (NiMh, NiCd) the battery does not produce inflammable potassium hydrate gas. Furthermore, the battery can be charged in the unit via the short-circuit proof charging contacts. Technical data: heat resistance: 250 C 10 min/150 C 15 min, tightness: IP 67, drop test: 2 m, type: uncooled microbolometer (VOx), video display: binocular LCD full scene view, resolution: 160x120 pixel, thermal indication: in C and baton indication -40 C C, field of view: 52 x 40, image frequency: 30 Hz NTSC, 25 Hz PAL, operating temperature: -40 C up to 80 C, power supply: 2 pcs. LiFePo4 batteries, duration: approx. 7 hours (with DVT >5 h), load cycles: 5000, camera start time: approx. 3 sec. Scope of supply: camera, batteries, digital charger, PC adapter, SD card, software, shoulder strap, bag, operation instruction. Dim. (WxHxD): approx. 202x159x80 mm, weight: approx. 1,45 kg Thermal imaging camera active hand-up hornet 160 M * Like art. no , however, with 3,5" mono display. Technical data: Heat resistance: 250 C 10 min/150 C 15 min, tightness: IP 67, drop test: 2 m, type: uncooled microbolometer (VOx), video display: 3,5" TFT, resolution: 160 x 120 pixel, thermal indication: in C and baton indication -40 C C, field of view: 52 x 40, image frequency: 30 Hz NTSC, 25 Hz PAL, operating temperature: -40 C - 80 C, power supply: 2 pcs. LiFePo4 batteries, duration: approx. 6,5 hours (with DVT >4,5 h), load cycles: 5000, camera start time: approx. 1 sec. Scope of supply: camera, batteries, digital charger, PC adapter, SD-card, software, shoulder strap, bag and operation instruction. Dim. (WxHxD): approx. 202x159x91mm, weight: approx. 1,45 kg Thermal imaging camera active hand-up hornet 320 B * With binocular video display. For fire brigade use, safety tasks, controls and industrial inspections. A tripod can be mounted. Continuous power supply via external 24 VCD interface (short-circuit proof). Via this interface it will be also possible to connect an external monitor, PC or a notebook. The camera family is provided with 5 different colour schemes for any kind of use: black hot, white hot, heat tracer, cold tracer and full colour mode in real time switching. The measured temperature also will be shown in the display at every mode. Temperature indication up to 595 C. Furthermore, the 320-series is provided with a double zoom. This function is 2x shown in the display. Thanks to the standard integrated SD card recorder, incl. 2 GB SD card records of approx. 4 hours video with real time stamp are possible. The data can be processed respect. filed at any customary PC or notebook by the PC adapter (card reader) supplied along with and the special software. Individual scenes, images etc. can be processed in any current formats (avi or.jpg) for sending via or burning on CD/DVD. 499

28 Thermal imaging cameras All functions of the camera family will be operated by only two easily accessible multi-function keys. Consequently simple and quick operation of the camera in use. The energy conception of the camera family is highly superior to customary batteries thanks to the new battery technology Nanophosphat. The battery has a running time of approx. 7 hours, the charging condition of the camera will be indicated in the video image. The charging time for a complete charging is at the digital charger supplied along with approx. 60 min at approx load cycles. Contrary to other batteries (NiMh, NiCd) the battery does not produce inflammable potassium hydrate gas. Furthermore, the battery can be charged in the unit via the short-circuit proof charging contacts. Technical data: heat resistance: 250 C 10 min/150 C 15 min, tightness: IP 67, drop test: 2 m, type: uncooled microbolometer (VOx), video display: binocular LCD full scene view, resolution: 320x240 pixel, zoom: 2x, thermal indication: in C and baton indication C, field of view: 52 x 40, image frequency: 30 Hz NTSC, 25 Hz PAL, operating temperature: -40 C up to 80 C, power supply: 2 pcs. LiFePo4 batteries, duration: approx. 7 hours, load cycles: 5000, camera start time: approx. 3 sec. Scope of supply: camera, batteries, digital charger, PC-adaptor, SD card, software, shoulder strap, bag and operation instruction. Dim. (WxHxD): approx. 202x159x80 mm, weight: approx. 1,45 kg Thermal imaging camera active hand-up hornet 320M Like art. no , however, with 3,5" mono display and resolution 320x240 Pixel. Technical data: heat resistance: 250 C 10 min/150 C 15 min, tightness: IP 67, drop test: 2 m, type: uncooled microbolometer (VOx), video display: 3,5" TFT, resolution: 320x240 pixel, zoom: 2x, thermal indication: in C and baton indication -40 C C, field of view: 52 x 40, image frequency: 30 Hz NTSC, 25 Hz PAL, operating temperature: -40 C - 80 C, power supply: 2 pcs. LiFePo4 batteries, duration: approx. 6,5 hours (with DVT >4,5 h), load cycles: 5000, camera start time: approx. 1 sec. Scope of supply: camera, batteries, digital charger, PC adapter, SD-card, software, shoulder strap, bag and operation instruction. Dim. (WxHxD): approx. 202x159x91 mm, weight: approx. 1,45 kg Vehicle charging station for thermal imaging cameras hornet* With digital charging function, charging maintenance 12/24 VDC, can be mounted horizontally and vertically Transmitter and receiver unit for thermal imaging camera hornet 2,4 GHz receiver unit with 4 adjustable receiver channels. Included: 2 power packs for supplying the system optionally with 12 VDC/24 VDC respect. 240 VAC. The video picture is transmitted via an USB cable to a PC or laptop. All necessary drivers as well as a program (Win9X/NT/XP) for observing and storage of the video are included Recording module (video) for thermal imaging camera hand-up* For hand cameras model f, fz and camouflage. 4 hours recording time, pre record float, one-button control, incl. 2 GB SD card, USB PC reading station, software, date recording function, viewer software, batteries Thermal imaging planar amplifying antenna For amplifying the radio signal (thermal images) of the head-up and hand-up thermal imaging cameras. Amplification of reception +18 db, 2,4 MHz. Incl. 1,5 m long connection cable to the receiver unit and suction base bracket. Dim. (WxH): approx. 400x400 mm

29 Thermal imaging cameras active head-up Thermal imaging camera active head-up ft for DIN-/HPS4100-helmets For following helmets: DIN H1, DIN H2, DIN H3, Dräger HPS Microbolometer first intervention camera for rapid finding and rescue of injured persons as well as for tracking down and observing the source of the fire. Quick mounting on the helmet, thus the hands are free for other workings! Provides view at smoke, fog and darkness. Change-over possibility of the thermal image from bright to dark (white - hot/black - hot). With additional temperature measurement. The temperature can be measured in C by a crossline in the centre of the image. This temperature will be indicated in the image in C and also by a temperature scale. The measurement can take temperatures between 0 C and 500 C. Battery-powered. Power supply: 3 AA 1,5 V dry-cell batteries (alkali). Operating time: approx. 180 min, optic: germanium lens f/1,0. Temperature resolution: 0,1 ºC, range: optimized for rooms of 0,5 up to 15 m, angle of view: horizontal 55, vertical 35, diagonal 58,57, start time: below 5 sec, sealing: dust- and waterprotected acc. to EN and class IP67, carbon body: impact and temperature resistant, sensor: microbolometer asi. Accessories: batteries, operating instruction, cleaning cloth, fixing strap with balance weight. Packed in an aluminium case. Immediately ready for use. Weight: approx. 1,5 kg (incl. batteries) Outdoor notebook PEGASUS RP965 Display: 13,3" Wide Active matrix TFT, touchscreen, WXGA 1280x800, daylight readable 640 cd/m². CPU: Intel Core 2 Duo (ULV), U7500, 2x 1,06 GHz, graphics: intel GME965 Integrated Graphics, RAM: 2 GB DDR II 667 MHz, HDD: 250 GB SATA, drive: DVD Super Multi Drive. Interfaces: 1x LAN RJ45, 1x VGA/D-sub 15-pin, 3x USB 2.0, 1x Headphone/ Speaker out, 1x Micro/Line in, 1x DC-in, 1x Arry Microphone, 1x PC Card Slot, 1x SD Card Reader, 1x Docking Connector, 1x RS-232. Connectivity: WLAN AGN, LAN 10/100/1000, Bluetooth 2.0 Class I + EDR, GPS, Modem V.92, 1x RJ11. Battery: Lithium ions 9 cells, 7800 mah, >6 hours. System software: Windows 7 Professional 32-bit. Environmental features: Magnesium body rain-, dust-, vibration- and shock-protected. MIL-STD 810, IP 54. Special features: backgroundlighted keyboard (87 keys), display swivel-type, IP. Scope of supply: Notebook, battery, power pack, system software, manual. Thermal imaging cameras Dräger Thermal imaging camera UCF 6000, Dräger Thermal imaging camera of the latest generation with focus on the essential functions for easy operation. Scope of supply: integrated laser pointer and fixed-image function, Lithium-Ion battery, battery charger, PC-software-CD, USB-cable, removable camera foot. Features: simple and user-friendly, can be operated intuitively by one hand, excellent image quality at a resolution of 160x120 pixel and a lens coverage of 47, integrated laser pointer for safe marking such as pockets of embers and filling level of containers, fixed image: freezing of the thermal image for simple control of heavily accessible areas and for view around the corner, rugged body, meets the protection class IP 67, long operating time of 4 hours thanks to state-of-the-art Lithium-Ion batteries, integrated temperature measurement. Dim. (WxHxD): approx. 125x280x110 mm, weight: approx. 1,34 kg Thermal imaging camera UCF 7000, Dräger Like art. no , however, with double digital zoom, three additional modes of application and thermal scan-function, image and sound storage. Features: fixed images will be stored simultaneously in the integrated image storage (capacity ~ 1000 photos), permanent sound and video recording of the thermal images of the last two hours (ring storage), standard equipment with one USB 2.0 interface for transmitting of images and videos on PC, 501

30 Thermal imaging cameras operation modes suitable for task of use: Standard for taking of photos outdoor, haz-mat actions etc., Persons for searching of persons in inside attack. Emphasizes the temperature ranges of cooler objects like persons in hot environment and at open flames for quick finding of persons. Fire provides strong contrasts during fire fighting at high temperatures and open flames. Thermal Scan supports e.g. at search of pockets of embers by colouring of objects above a temperature which can be arbitrary chosen, intrinsically safe: approval for use in explosive areas (ATEX Zone 1) Transport bag for thermal imaging cameras UCF 6000 and 7000* Neck carrying strap for thermal imaging cameras UCF 6000 and 7000* Side carrying strap for thermal imaging cameras UCF 6000 and 7000* Spare battery for thermal imaging cameras UCF 6000 and 7000* Thermal imaging camera UCF 1600 (PAL without Thermal Scan), Dräger With sophisticated micro-bolometer technology for unique image colouring and image quality. Technical data: sensor type: uncooled MicroIR Vox bolometer resolution: 160x120 pixel lens material: Germanium sensivity to temperature: < 0,05 K (nominal) field of view diagonal: 55 temperature measurement: digital temperature indication, -40 C up to 590 C image frequency: 60 Hz various colour indications (TempColor): yellow, orange, red, blue spectral range: 7-14 µm video standard PAL double digital zoom battery up to approx. 4 hours incl. battery charger, battery, adaptor plug, operation instruction, transport case with cellular material insert dim. of camera (HxWxD): approx. 140x140x180 mm (5,6x5,5x7,0") weight: approx. 1,3 kg (with battery) Thermal imaging camera UCF 1600 (PAL with Thermal Scan), Dräger Like art. no , however, with Thermal Scan-(TS-)technology, by which heat sources deviating from the normal ambient temperature can be quickly and easily sensed Thermal imaging camera UCF 3200 (PAL without Thermal Scan), Dräger With sophisticated micro-bolometer technology for unique image colouring and image quality. Technical data: sensor type: uncooled MicroIR Vox bolometer resolution: 320x240 pixel lens material: Germanium sensivity to temperature: < 0,05 K (nominal) field of view diagonal: 68 temperature measurement: digital temperature indication, -40 C up to 590 C image frequency: 60 Hz various colour indications (TempColor): yellow, orange, red, blue spectral range: 7-14 µm video standard PAL double digital zoom battery up to approx. 4 hours incl. battery charger, battery, adaptor plug, operation instruction, transport case with cellular material insert dim. of camera (HxWxD): approx. 140x140x180 mm (5,6x5,5x7,0") weight: approx. 1,3 kg (with battery) 502

31 Thermal imaging cameras Thermal imaging camera UCF 3200 (PAL with Thermal Scan), Dräger Like art. no , however, with Thermal Scan-(TS-)technology, by which heat sources deviating from the normal ambient temperature can be quickly and easily sensed Battery Li-ions for thermal imaging cameras UCF 1600/3200, Dräger Vehicle charger for thermal imaging cameras UCF 1600/3200, Dräger For 12 V and 24 V Shoulder strap for thermal imaging cameras UCF 1600/3200, Dräger Carrying strap, extendible, for thermal imaging cameras UCF 1600/3200, Dräger Battery charger for thermal imaging cameras UCF 1600/3200, Dräger Incl. adaptor plug 230 V Base handle for thermal imaging cameras UCF 1600/3200, Dräger Video-/image memory grip for thermal imaging cameras UCF 1600/3200, Dräger For memory of more than 2 hours video and more than 1000 images, incl. USB cable and driver software Transmitter grip for thermal imaging cameras UCF 1600/3200, Dräger For transmission of images of the camera on available receiving stations Receiving station Handheld-Receiver for UCF 1600/3200, Dräger Compact, portable receiving station with integrated display, channel selector switch, video outlet, integrated battery and integrated antenna. Mains operation (optional 12 V and 240 V) and battery operation are possible Tripod for setting up of the thermal imaging camera Receiving station Command Center for thermal imaging camera With large LCD monitor (17"), with digital video recorder with SD card memory integrated in a solid plastic case plus bar antenna. Mains operation (optionally 12 V and 240 V) and battery operation are possible

32 Thermal imaging cameras Receiving station Stand Alone for thermal imaging camera (Without monitor), supply voltage 12 V or 240 V. With channel selector switch, video outlet, bar antenna and BNC video cable for connection with an external monitor Roof antenna with magnet for receiving stations For receiving stations Stand Alone and Command Center. High gain receiving aerial with magnet for easy fixing on metal surfaces, incl. antenna cable 3 m, with TNC connection