Mares regulators have been tested and certified in compliance with EC directive 89/686/EEC according to the EN 250: 2014 standard.

Transcription

1 XTENDE

2 D RANGE

3 BREATHING SYSTEMS Mares regulators have been tested and certified in compliance with EC directive 89/686/EEC according to the EN 250: 2014 standard. All Mares Nitrox regulators are tested in accordance with European standard EN All Mares Nitrox regulators are compatible with oxygen mixes up to 100% O2 and are equipped with a dedicated connection in conformity with European standard EN144-3.

4 75xr - DR FULL TEk SET code: This set includes: - 2 DR Second Stages XR First Stages - 2 Hoses (60 cm cm) - 1 Neck Bungee - 1 Dead Bolt Snap Vortex assisted Newly designed mesh grid High-performance second stage Stable flow without excessive positive-pressure breathing (VAD - Vortex Assisted Design) No need for user adjustments Compact and rugged All-metal body is made from high-impact chrome and nickel-plated brass Slightly negatively buoyant Strong and resistant, ideal for scootering, deep, cold and wreck diving Cold water resistant Cover design disperses water flow around the second-stage diaphragm and reduces free flow (Mesh Grid Design) Easy-to-push purge New ultimate carbon/titanium PU coated miflex hose: Stronger resistance to cuts, abrasions, bursting and UV less floating Environmentally sealed - flexible and comfortable All-metal (nickel and chrome DR Standard downstream valve plated brass) second stage Flow Rate (STP) 620 l/min 22 cuft/min Weight (without hose) Hose length 269 g / 9.6 oz 60 cm / 24 inches cm / 7 ft 107

5 25xr - DR FULL TEk SET code: This set includes: - 2 DR 2 nd Stages XR 1 st Stages - 2 Hoses (60 cm cm) - 1 Neck Bungee - 1 Dead Bolt Snap 25xr - CR FULL TEk SET code: This set includes: - 2 CR 2 nd Stages XR 1 st Stages - 2 Hoses (60 cm cm) - 1 Neck Bungee - 1 Dead Bolt Snap Vortex Assisted New designed mesh grid High-performance second stage stable flow without excessive positive-pressure breathing (VAD - Vortex Assisted Design) No need for user adjustments Compact and rugged All metal body is made from high-impact chrome and nickel-plated brass Slightly negatively buoyant Strong and resistant, Ideal for scootering, deep, cold and wreck diving Cold water resistant Cover design disperses water flow around the second-stage diaphragm and reduces the free flow (Mesh Grid Design) Easy-to-push purge New ultimate carbon/titanium PU coated miflex hose: Stronger resistance to cuts, abrasions, bursting and UV less floating Environmentally sealed - flexible and comfortable Vortex Assisted New designed soft cover High-performance second stage stable flow without excessive positive-pressure breathing (VAD - Vortex Assisted Design) No need for user adjustments Slightly negatively buoyant Cover design disperses water flow around the second-stage diaphragm and reduces the free flows Easy-to-push purges Can be opened under water Ideal for cave and cold WATER diving New ultimate carbon/titanium PU coated miflex hose: Stronger resistance to cuts, abrasions, bursting and UV less floating Environmentally sealed - flexible and comfortable All-metal (nickel and chrome DR Standard downstream valve plated brass) second stage Flow Rate (STP) 620 l/min 22 cuft/min Weight (without hose) Hose length 269 g / 9.6 oz 60 cm / 24 inches cm / 7 ft CR Flow Rate (STP) Weight (without hose) Hose length Technopolymer second Standard downstream valve stage 560 l/min 20 cuft/min 193 g / 7 oz 60 cm / 24 inches cm / 7 ft 108

6 VR 2 nd STAGE 75XR AST 1 st stage code: NR: black - air code: NX: green - O2 code: NR: air - G5/8 code: NX: O2 - M26 The first vertical second stage ever Excellent breathing position Integrated sagittal VAD (S-VAD) Unique bubble exhaust Oversized silicone purge button Freedom of movement in all positions Ideal for stage decompression, travel gas and sidemount configuration Can be mounted on the right as well as the left side Under the shoulder hose position New ultimate carbon/titanium PU coated miflex hose: Stronger resistance to cuts, abrasions, bursting and UV less floating Environmentally sealed - flexible and comfortable 4 vertical and 4 radial LP ports (3/8 UNF) Two pre-oriented HP ports Perfect, snag-free LP hose positioning Full metal body CHROME-plated marine brass Compact, solid, one-piece body Balanced diaphragm DFC preferential flow path Extreme reliability Highest safety New ACT valve - Advanced Coating Technology Maximized breathing comfort Environmental dry system = keeps water out of the main spring chamber + prevents ice buildup + keeps silt and contamination out Cold water resistant DIN only Designed for extreme depth, demanding dives & mixed gas diving (Helium, O2, Nitrogen) For twinset use but equally suitable for single or stage cylinder configurations AST- Auto Sealing Technology Keeps the first stage dry. Reliability without compromise The system is automatically activated by air Tested with oxygen and cold temperatures in demanding environments Patented system According to the directive 2016/426, 89/686, and EN250, these individual stages are spare parts and are to be used only with Mares XR DR, CR and VR second stages.they should never be matched with any other second stage resulting in a combination that is not certified. VR Flow Rate (STP) Weight (without hose) Technopolymer second stage 560 l/min 20 cuft/min 199 g / 7 oz Standard downstream valve 75XR Flow Rate at end of one 210cm/7ft long low pressure hose (STP) Static intermediate pressure (0-300bar/4350psi supply pressure) High pressure ports Low pressure ports All-metal (nickel and chrome plated brass) first stage 1300 l/min - 45 cuft/min 9,8-10,2 bar / psi 2 (7/16 UNF) 8 (3/8 UNF) Balanced diaphragm mechanism Hose length 100 cm / 40 inches Weight DIN: 1142 g / 40 oz 109

7 25XR AST 1 st stage R2 1 st stage code: Left code: NR: air - G5/8 code: Right code: NX: O2 - M26 Full metal body nickel-plated marine brass Compact, solid one-piece body Balanced diaphragm - DFC New ACT valve - Advanced coating technology Dry cold water kit DIN only Trimix, Heliox, Helitrox 2 LP ports (3/8 UNF) all angled downward 1 HP port (IPD: Intelligent Port Design) powered (7/16 UNF) Extreme reliability Highest safety Maximized breathing comfort Extreme depth, engaged dives & Mixed gas diving (Helium, O2, Nitrogen) Perfect LP hoses positioning no useless port - Offering perfect, snag-free hose positioning For twinset use but equally suitable for single or stage cylinder configurations (IPD: Intelligent Port Design) concept for HP Dual configuration: fits all certifying agencies from RSTC to DIR divers and all XR uses including cave Minimized risk of accidental snagging + no hose kinking + easier access to the manifold valves Environmental dry system = keeps water out of the main spring chamber + prevents ice buildup + keeps silt and contamination out Cold water resistant Lightweight: 432 g Sturdy and compact Easy to clean and maintain Piston control Very simple and reliable DIN only AST - Auto Sealing Technology Keeps the first stage dry. Reliability without compromise The system is automatically activated by air Tested with oxygen and cold temperatures in demanding environments Patented system According to the directive 2016/426, 89/686, and EN250, these individual stages are spare parts and are to be used only with Mares XR DR, CR and VR second stages.they should never be matched with any other second stage resulting in a combination that is not certified. AST - Auto Sealing Technology Keeps the first stage dry. Reliability without compromise The system is automatically activated by air Tested with oxygen and cold temperatures in demanding environments Patented system According to the directive 2016/426, 89/686, and EN250, these individual stages are spare parts and are to be used only with Mares XR DR, CR and VR second stages.they should never be matched with any other second stage resulting in a combination that is not certified. 25XR All-metal (nickel and chrome plated brass) first stage Flow Rate at end of one 210cm/7ft long low pressure 1200 l/min - 42 cuft/min hose (STP) Static intermediate pressure (0-300bar/4350psi supply 8,8-9,4 bar / psi pressure) Dynamic Flow Control (DFC) Up to 9,9 bar / 144 psi High pressure ports 1 (7/16 UNF) Low pressure ports 2 (3/8 UNF) Of which DFC ports 1 Weight DIN: 758 g / 27 oz Balanced diaphragm mechanism R2S Flow Rate at end of one 210cm/7ft long low pressure hose (STP) Static intermediate pressure (0-300bar/4350psi supply pressure) Dynamic Flow Control (DFC) High pressure ports Low pressure ports All-metal (nickel and chrome plated brass) first stage 1200 l/min - 42 cuft/min Piston mechanism 230bar / 3300psi 30bar / 450ps Up to 11,5 bar / 167 psi 1 (7/16 UNF) 4 (3/8 UNF) Of which DFC ports 1 Weight DIN: 431 g / 15 oz 110

8 Instrument SPG52 code: cm hose - BAR code: cm hose - PSI code: cm Miflex - BAR code: cm Miflex - PSI code: cm Miflex Oxygen - BAR code: cm Miflex Oxygen - PSI Over Pressure Relief Valve code: standard LP port thread, 3/8 UNF set to 13bar, nominally, with +/-0.5bar tolerance chrome plated brass standard regulator spring SPG with graduation range bar, psi Single reading Tempered glass Luminescent glow in the dark screen 56 cm rubber hose or 15 cm milflex carbon/titanium black hose AIR or 100% Oxy (oxy clean) Certified according to EN 250 DESIGNED for technical divers and top quality regs Double chrome, mirror-plated case treatment: assures the best look and maximum protection against corrosion Brass housing with tempered glass for extreme durability + chance to use with no cover protection due to double welding Copper beryllium bourdon tube mechanism that never goes out of calibration EVEN WITH HARD KNOCKS Greatest degree of accuracy and reliability Preferred for its simplicity by many technical divers who follow DIR training philosophy OFFERED IN a total of 6 options to fit all technical requirements Neck Regulator Bungee code: Silicone regulator necklace Attaches easily to any regulator 2nd stage mouthpiece Allows regulator to hang close under the chin Keep your second stage where you need it DURABLE, SHAPE RETAINING SILICONE BK YL Weight 210 g 7.40 oz Diameter 52 mm 2 111

9 Tank Bands Seam-welded, marine-grade 316 stainless steel Constructed from wide, seam-welded, marine-grade 316 stainless steel Available in 3 different sizes Supplied in pairs with a fastening kit 7L 10L 15L Code Cyl. Centres 154 mm mm 177 mm mm 216 mm mm Band Sizes 160 mm centres 185 mm centres 220 mm centres Cyl. Diameter & Size 140 mm 171 mm 204 mm smith stage system 6 SMITH Stage System code: stainless cylinder clamp with PVC sleeve 6 cord with all BK tube, 27 cm, w/bolt snaps S.S. 316 size 120 mm 6 (17 cm) 2 rubber straps with webbing puller 7 SMITH Stage System code: stainless cylinder clamp with PVC sleeve without plastic bag 8 cord with all BK tube, 30.5 cm, w/bolt snaps S.S. 316 size 120 mm 8 (23 cm) 2 rubber straps with webbing puller 8 SMITH Stage System code: stainless cylinder clamp with PVC sleeve 8 with all BK tube, 30.5 cm, w/bolt snaps S.S. 316 size 120 mm 8 (23 cm) 2 rubber straps with webbing puller 112

10 Elastic stage tank strap code: l code: l code: l 1 PAIR OF ELASTIC LOOP TANK STRAPS 2.5 cm WIDE WITH WEBBING PULLER 3 SIZES: 6 FOR 6 DIAMETER TANK 7 FOR 7 DIAMETER TANK 8 FOR 8 & 8.5 DIAMETER TANKS Rubber STAGE TANK strap code: code: PAIR OF RUBBER LOOP TANK STRAPS 2.5 cm WIDE WITH WEBBING PULLER 2 SIZES: 6 FOR 6 DIAMETER TANK (17 cm RUBBER LOOP), 7 FOR 7, 8 & 8.5 DIAMETER TANKS (23 cm RUBBER LOOP) stage rigging set code: the most modular system FOR CARRYING stage tanks fits all diameters of tanks FITS STAGES OF ALL LENGTHS includes: 2 large Stainless Steel Dead Bolt SnapS, adjustable tank band with stainless steel buckle and hi-resistance cord 113

11 BUOYANCY SYSTEMS

12 RED DEVIL SINGLE BAckmount set code: A complete set Light and perfect for travelling Great look that matches other new products Easier for beginners and non-technical divers as already mounted 16 liter red single tank donut 6 mm red aluminum backplate 6 mm red aluminum rings Red aluminum buckle Standard webbing harness 2 tank straps with red aluminum buckles Black flat head bolt screws 115

13 heavy duty HARNESS A. code: Complete B. code: Mounted System A. includes: Webbing 3.5 m webbing with center hole and GROMMET 3 x 40 mm ELASTIC LOOP RETAINERS 1.5 m Crotch strap B. includes: Harness Heavy Duty Complete (A) Backplate Stainless Steel 3 mm Harness 2 x bent D-ring 50mm stainless steel 2 x straight D-Ring 50mm stainless steel 4 x 3-bar slides normal stainless steel 2 x 3-bar slides toothed stainless steel 1 x Waist buckle stainless steel Crotch strap 2 x straight D-rings 50 mm stainless steel 1 x 3-bar glides 50 mm stainless steel DIR Hogarthian configuration A B

14 heavy light HARNESS A. code: Complete B. code: Mounted System A. includes: Webbing 3.5 m webbing with center hole and GROMMET 3 x 40 mm ELASTIC LOOP RETAINERS 1.5 m Crotch strap B. includes: Harness Heavy Light Complete (A) Backplate Aluminum 3 mm Harness 2 x bent D-ring 50 mm black aluminum 2 x straight D-Ring 50 mm black aluminum 4 x 3-bar slides normal black aluminum 2 x 3-bar slides toothed black aluminum 1 x Waist buckle black aluminum Crotch strap 2 x straight D-rings 50 mm black aluminum 1 x 3-bar glides 50 mm black aluminum DIR Hogarthian configuration A B

15 Sidemount Back Weight code: Holds up to 12 kg 1200D bulletproof ballistic nylon and 600D polyester exterior Heavy duty cold water Velcro dual closing system Attachment grommets on top and bottom for modular fixing on sidemount plates 3 back straps for adjustable attachment on harness Stylish, durable (resistant to scuffs, tears and abrasions), lightweight and long-lasting finest quality materials Sidemount Side Weight code: Holds up to 4 kg 1200D bulletproof ballistic nylon and 600D polyester exterior Modular - they can be installed on any Mares XR harness Can be placed on the shoulder or waist straps Heavy duty cold water Velcro single closing system Integrated flat D-ring Stylish, durable (resistant to scuffs, tears and abrasions), lightweight and long-lasting finest quality materials Sidemount Back Pouch code: D bulletproof ballistic nylon and 600D polyester exterior posterior pouch Zippered front 316 stainless steel D-rings to attach fastening Heavy duty plastic zipper and slider with elongated teeth - Does not interfere with the woven textile tape, easy to handle, strong and durable Very useful accessory for all sidemount divers enabling you to stow away everything that you would normally carry in your pockets Fast and easy water drainage Outer mesh pocket for storage of slates, dive tables or wetnotes Stylish, durable (resistant to scuffs, tears and abrasions), lightweight and long-lasting finest quality materials 118

16 SF2 SS316 Clip code: cargo pocket code: Allows free adjustment of RIGHT harness strap Precision machined from SS AISI 316 Strong, durable, logical alternative to plastic clips Fits in all our rigid plates (Alu and SS) 1200D bulletproof Ballistic Nylon Large main volume pocket with zippered closure Internal bungee cord Internal stainless steel D-ring Small front compartment pocket with zippered closure 2 large NYLON loops to slide over HARNESS BELT 2 small NYLON loops to ATTACH POCKET TO standard 2 waistband 2 bottom drain grommets Unparalleled versatility due to its modular nature A highly technical rig for those trained to push the limits Can also be scaled down to make a travel friendly set up suitable for any diver Designed to complement the XR range Can be attached to your XR harness or any other Toothed SS316 Trigliders code: Accessories for additional configuration Precision machined from SS AISI 316 Strong, durable, fits with all harnesses straps 10 pcs D-Rings SS316 Flat code: mask pocket code: Accessories for additional configuration Precision machined from SS AISI 316 Strong, durable, fits with all harnesses straps 10 pcs 1200D bulletproof Ballistic Nylon 600D Polyester web grid Large and expandable Inner reinforcement in black Polyurethane 1 oversized clip Long nylon strap allowing full pocket expansion 1 large NYLON loop to slide over HARNESS BELT Unparalleled versatility due to its modular nature A highly technical rig for those trained to push limits Can also be scaled down to make a travel friendly set up suitable for any diver Designed to complement the XR range Can be attached to your XR harness or any other D-Rings SS316 Bent code: Accessories for additional configuration Precision machined from SS AISI 316 Strong, durable, fits with all harnesses straps 10 pcs 119

17 BACKPLATE stainless steel code: mm code: mm Stainless Steel 3mm grade LASER CUT AND LASER ETCHED SLOTS 8 slots specially designed for OPTIMUM positioning of the harness webbing 2 upper and 2 lower slots for nylon cylinder bands so a single cylinder can be strapped directly Having only 2 slots provides enough lateral cylinder stability without weakening the strength of the spine 2 wide crotch strap slot, 15 holes 3 holes at the top of the plate offer a range of height adjustments for buoyancy cells and cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned 4 Upper and lower perimeter holes along either side and 4 holes along the bottom allow for the mounting of accessories and side-mount butt plate Bended lower edges Mares XR logos and laser cut shaped axis Highly technical pre-shape - Unparalleled versatility Ultra-rugged backbone Pushed to limits through intense testing Total modularity: all Harnesses and all Donuts/Wings BACKPLATE aluminum code: mm 6061 marine grade anodized aluminum alloy 13 LASER CUT AND LASER ETCHED SLOTS 8 slots specially designed for OPTIMUM positioning of the harness webbing 2 upper and 2 lower slots for nylon cylinder bands so a single cylinder can be strapped directly Having only 2 slots provides enough lateral cylinder stability without weakening the strength of the spine 2 wide crotch strap slot 15 holes 3 holes at the top of the plate offer a range of height adjustments for buoyancy cells and cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned 4 Upper and lower perimeter holes along either side and 4 holes along the bottom allow for mounting accessories and side-mount butt plate Bended lower edges Mares XR logos and lazer cut shaped axis Highly technical pre-shape -Unparalleled versatility Ultra-rugged unfoldable backbone Pushed to limits through intense testing Total modularity: all Harnesses and Donuts/Wings Thickness 3 mm 6 mm Weight 2,5 kg 4 kg Compatibility Deluxe Padding - Butt Plate Thickness Weight Compatibility 3 mm 750 g Deluxe Padding - Butt Plate 120

18 BACKPLATE soft code: D bulletproof Ballistic Nylon Ultralight POLYPHRENE HYDRO-DRAINAGE COMFORT PADDING, 4 SLOTS 2 upper and 2 lower slots accommodate nylon cylinder bands to strap single cylinder directly to the plate 5 double slide bars Specially positioned for OPTIMIZED fitting of the harness webbing and the crotch strap 2 centered holes at the top and 2 at the bottom offer a range of height adjustments for the buoyancy cells 2 mid perimeter holes along either side and 4 holes along the bottom allow for mounting accessories and side-mount butt plate 4 D-Rings Complementing the side holes Mares XR logos embroidered to enhance the look of the plate Highly technical shape - Unparalleled versatility Ultra-rugged material - PUSHED TO LIMITS THROUGH INTENSE TESTING Total modularity: all Harnesses and all Donuts/Wings COMPAtibility: Deluxe Padding - Butt Plate Sidemount PlateS Laser cut and laser etched edges Highly technical pre-shape - Unparalleled versatility Ultra-rugged - Pushed to the limits through intense testing Total modularity: All types of sidemounting Sidemount TOP Plate code: g 6 mm stainless steel 3 mm grade 316 Fully modular plate allowing all types of mounting Sidemount BOTTOM Plate code: g 6 mm stainless steel 3 mm grade 316 Sidemount BUTT PLATE code: D bulletproof Ballistic Nylon Polyphrene hydro-drainage comfort padding 4 holes along the bottom allow for the mounting OF any harness as well as adding accessories Provides the proper amount of rigidity to hold tanks in position and eliminate sag Two stainless steel 316 marine grade handles used for tank attachment Allows divers to transform their existing harness and buoyancy compensating wing into a rig capable of sidemounting tanks Sidemount TAIL Plate code: g 3 mm stainless steel 3 mm grade 316 Sidemount HIP RINGS code: (Right &Left) 105 g each 3 mm stainless steel 3 mm grade

19 Sidemount Pure Bladder code: liters fully compatible with all harnesses from the range 1200D bulletproof ballistic nylon and 600D polyester exterior Inner air cell: black polyurethane Heavy duty plastic zipper and slider with elongated teeth - Does not interfere with woven textile tape, easy to handle, strong and durable Fully modular trim: cave, open water, wreck cold and warm waters Wave shape for perfect envelopment of the back weight pouch No bungees compressing the body allowing comfort and optimal trim No camel or cake effect with pre-shaped internal bladder allowing perfect flat trim Reversible low profile dump valve / inflator Knobless puller 35 low profile, round-shaped hose K style inflators with brass buttons Stylish, durable (resistant to scuffs, tears and abrasions), lightweight and long-lasting finest quality materials donut bladder single tank code: kg code: kg Drains: 6 large grommets, 2 on top and 4 on bottom 1200D bulletproof Ballistic Nylon and 600D Polyester EXTERIOR Inner air cell: black Polyurethane Heavy duty plastic ZIPPER and SLIDER with elongated teeth 4 heavy duty grommets positioned to ALLOW OPTIMUM TRIM K style INFLATORS with brass buttons 35 low profile, round-shaped hose LEFT POSITION DOES NOT INTERFERE WITH 1ST STAGE DUMP VALVE Right and left modular low profile dump valve and blinder Knobless puller Tank Stabilizer body slide Bars Finest quality materials STYLISH, DURABLE (RESISTANT TO TEARS, SCUFFS AND ABRASIONS), LIGHTWEIGHT AND LONG-LASTING Very smart and unique design allowing the cylinder to nest inside Extremely streamlined - very stable continuous loop shape SMOOTH GAS SHIFT from left to right Top quality zipper: does not interfere with the woven textile tape, easy handling, strong and durable 122

20 donut bladder twin tank code: kg code: kg wing bladder twin tank code: kg code: kg Drains: 6 large grommets, 2 on top and 4 on bottom 1200D bulletproof Ballistic Nylon and 600D Polyester Exterior Inner air cell: black Polyurethane Heavy duty plastic Zipper and SLIDER with elongated teeth 4 heavy duty grommets positioned to ALLOW OPTIMUM TRIM K style INFLATORS with brass buttons 35 low profile, round-shaped hose MID POSITION DOES NOT INTERFERE WITH 1ST STAGE DUMP VALVE Right and left modular low profile dump valve and blinder Knobless puller Finest quality materials STYLISH, DURABLE (RESISTANT TO TEARS, SCUFFS AND ABRASIONS), LIGHTWEIGHT AND LONG-LASTING Extremely streamlined - very stable continuous loop shape SMOOTH GAS SHIFT of air from left to right Top quality zipper: does not interfere with the woven textile tape, easy handling, strong and durable Drains: 4 large grommets, 2 on top and 2 on bottom 1200D bulletproof Ballistic Nylon and 600D Polyester Exterior Inner air cell: black Polyurethane Heavy duty plastic Zipper and slider with elongated teeth 4 heavy duty grommets positioned to ALLOW OPTIMUM TRIM K style INFLATORS with brass buttons 35 low profile, round-shaped hose MID POSITION DOES NOT INTERFERE WITH 1ST STAGE DUMP VALVE Right and left modular low profile dump valve and blinder Knobless puller Finest quality materials STYLISH, DURABLE (RESISTANT TO TEARS, SCUFFS AND ABRASIONS), LIGHTWEIGHT AND LONG-LASTING Extremely streamlined - very stable continuous loop shape SMOOTH GAS SHIFT from left to right Top quality zipper: does not interfere the woven textile tape, easy handling, strong and durable 123

21 rigging accessories deluxe PADDING code: Adjustable Shoulder Pads Movable Velcro tabs for a custom fit around shoulder, D-ring and harness accessories Integrated storage compartment to carry lift devices Ultimate in comfort and convenience without sacrificing any features Shoulder mounted D-rings can easily be moved to the desired location without affecting the shoulder pad sidemount stage bungees code: Dry Suit Inflation Mounting Band code: Independent bungees 52 cm long pair of bungees to be attached to the back/shoulder plate Bolt snaps attached to the free ends of the bungees To be stretched around the neck of the cylinder with bolt snap clipped on a chest mounted harness D-ring Can be used with any valves - matched (left & right hand) valves are not required Simple and easy to use Inflation tank mounting strap with buckle For mounting a small 0,85L or 1L steel air or argon bottle directly on a back plate Suitable especially for cold, deep, wreck or cave diving A secondary bottle filled with Argon is the most common method used to increase insulation properties of thermal garments PROVIDES A quick, secure and lightweight mounting option for drysuit inflation sources NOT AVAILABLE IN NORTH AMERICA 124

22 rigging accessories Deadbolt Screw Flat code: mm Chrome Deadbolt Screw Flat code: mm Black STRONG, DURABLE SCREW FOR ALL ATTACHMENTS PRECISION MADE FROM AISI 316 GRADE STAINLESS STEEL 11 mm FLAT HEAD DEAD BOLT SCREW WITH O-RINGS ACCESSORIES FOR ADDITIONAL CONFIGURATION 4 PCS (1PC = MALE + FEMALE + O-RINGS) ALSO FOR USE WITH ALUMINUM PLATES WITH O-RINGS TO PREVENT ANODIZING STRONG, DURABLE SCREW FOR ALL ATTACHMENTS PRECISION MADE FROM AISI 316 GRADE STAINLESS STEEL 11 mm FLAT HEAD DEAD BOLT SCREW WITH O-RINGS ACCESSORIES FOR ADDITIONAL CONFIGURATION 4 PCS (1PC = MALE + FEMALE + O-RINGS) ALSO FOR USE WITH ALUMINUM PLATES WITH O-RINGS TO PREVENT ANODIZING Deadbolt Screw Round code: mm code: mm Thumbwheel SS316 code: x14 mm code: x18 mm STRONG, DURABLE SCREW FOR ALL ATTACHMENTS PRECISION MADE FROM AISI 316 GRADE STAINLESS STEEL ROUNDED HEAD - 6 mm AND 9 mm Accessories for additional configuration 4 PCS (1PC = MALE + FEMALE) PRECISION MADE FROM AISI 303 STAINLESS STEEL STRONG AND DURABLE EASY ALTERNATIVE TO THE TRADITIONAL WINGNUT/BUTTERFLY KNURLED SURFACE FOR EASIER GRIP 28X14 mm AND 28X18 mm WITH A HOLE THROUGH THE CENTER 2 PCS 125

23 insulation systems

24 Active Heating Vest code: Double zip for comfort when seated Supplied with rechargeable battery and charger Adjustable heat setting temperature control 2-5 hours heating time Hand washable Created to be even lighter and thinner for demanding divers provides heat to the back kidney area and to each side of the chest in order to give a feeling of complete warmth to the upper body! The Active Heating Vest is not suitable for people with pacemakers battery pack features Charge level and Battery level indicator EU charger AHV standard battery code: Standard Garment Voltage 7.4V Lithium Capacity Heating Time 2600 mah 2-5 hours Battery Capacity Cell 2600 mah Brannew grade-a Li-ion Weight approx 125 g IN AC100V~240V Dimension 70mm x 50mm x 22mm Charger OUT DC8.4V 1.2A Voltage 7,4 V Single output (EU type) Sizes XS S M L XL 2XL Chest Size "

25 XR1 kevlar LATEX code: Dry Suit Kevlar with Latex Seals Latex conic neck and wrist seals (allowing dry gloves) New exclusive dedicated purge and inflation valve New super light (<2,8 kg) breathable Bilaminate Kevlar type proctection on shoulders, BEHIND, knees and shins ENHANCED DESIGN for maximum flexibility 2 YKK front shifted plastic zippers: 1 heavy duty plastic zip and a new YKK 'Aquaseal Dry' zip Adjustable drawstring waist and crotch strap Adjustable pre-mounted elastic large and comfortable suspenders Embedded boots in 4 mm neoprene with a rigid sole Reinforced boot instep and adjustable velcro strap for perfect closure 2 SELF-DRAINING FOUR-COMPARTMENT POCKETS, CLOSED WITH A HIGH- STRENGTH ZIP AND EQUIPPED WITH MULTIPLE BUNGEES INSIDE PIPING AROUND THE POCKET FLAP FOR BETTER GRIP DRY SEAL AROUND NECK AND COMPLETE NECK COVERAGE FROM THE HOOD TO AVOID WATER EXPOSURE SPECIAL CARPET BAG for extremely demanding technical divers, long cave, deep and wreck diving Extremely strong and durable, it is still versatile and eases all movements such as frog kicking and valve-drills DETAILS Sizes XS S M L XL 2XL 3XL 128

26 XR1 kevlar SILICONE code: Dry Suit Kevlar with Silicone ST Seals Silicone conic grey Si-Tech quick connect wrist and neck seals, SLT dry seal on both the wrists and the neck (can be replaced immediately by the user) New exclusive dedicated purge and inflation valve New super light (<2,8 kg) breathable Bilaminate Kevlar type proctection on shoulders, BEHIND, knees and shins ENHANCED DESIGN for maximum flexibility 2 YKK front shifted plastic zippers: 1 heavy duty plastic zip and a new YKK 'Aquaseal Dry' zip Adjustable drawstring waist and crotch strap Adjustable pre-mounted elastic large and comfortable suspenders Embedded boots in 4 mm neoprene with a rigid sole Reinforced boot instep and adjustable velcro strap for perfect closure 2 SELF-DRAINING FOUR-COMPARTMENT POCKETS, CLOSED WITH A HIGH- STRENGTH ZIP AND EQUIPPED WITH MULTIPLE BUNGEES INSIDE PIPING AROUND THE POCKET FLAP FOR BETTER GRIP DRY SEAL AROUND NECK AND COMPLETE NECK COVERAGE FROM THE HOOD TO AVOID WATER EXPOSURE SPECIAL CARPET BAG for extremely demanding technical divers, long cave, deep and wreck diving Extremely strong and durable, it is still versatile and eases all movements such as frog kicking and valve-drills DETAILS Sizes XS S M L XL 2XL 3XL 129

27 XR3 Neoprene Latex code: High density hyper flexible neoprene - Tough but flexible Adjustable, pre-mounted, large, comfortable elastic suspenders Latex conic neck and wrist seals (allowing for use of dry gloves) Enhanced design for maximum flexibility Embedded boots in 4 mm neoprene with a rigid sole Reinforced boot instep and adjustable Velcro strap for perfect closure 1 neoprene wide zippered pocket on the right leg Dry seal around neck and complete coverage from the hood to avoid water exposure Same collar neoprene system as XR1 Graphite (Kevlar type) protection on the knees, shoulders and posterior TM back mounted dry zip - XR inlet and outlet valves Latex seals on neck and wrists Sizes XS S M L XL 2XL 3XL 130

28 size chart - XR dry suits S M L XL 2XL 3XL MARES XR Body hight 170 +/- 5 cm 175 +/- 5 cm 180 +/- 5 cm 185 +/- 5 cm 190 +/- 10 cm 195 +/- 10 cm MARES XR chest >120 >125 >130 Suit length Chest Waist Hips Torso length Inseam Arm length Wrist cuff Ankle cuff Suit size S M L XL 2XL 3XL Boot Size Last length (cm) Last width_toe (cm) 8, ,3 9,5 10 Last width_heel (cm) 5,5 5,5 5, ,5 DRY SUIT HOOD code: code: dry suit suspender grey silicone seals accessories neck code: code: Small wrist bottleneck (1Pair) code: code: Small Thickness 4 mm Sizes XS S M L XL 2XL 3XL 131

29 COMFORT MID BASE LAYER code: EXTREME UNDERGARMENT code: Can be used as a base layer or as a mid-layer under a dry suit - Perfect for neoprene dry suits Made using Polartec Powerstretch (originally developed for NASA) Breathable, fleece-lined, windproof and water-resistant panels Traps a layer of air - a much better insulator than water - next to the skin Warm without contributing to bulk or buoyancy Flat seams for next to skin comfort Enhanced durability and freedom of movement Keeps the wearer drier and more comfortable Ultra-lightweight Thumb-loops hold sleeves in place during donning Uniquely designed secure foot pockets Unisex range Every suit comes with a lightweight dry sack, ideal for keeping the undersuit and other items dry amongst wet dive gear Enhanced insulation on critical zones of the body Breathable, fleece-lined windproof, water-resistant panels on the chest and arms Between dives additional weather protection Enhanced Durability and freedom of movement Ceramic-impregnated fabric and resin-coated fibres, give enhanced abrasion resistance without impeding fabric breathability or stretch Handwarmer pockets for comfort and convenient zipped pocket for valuables Unique retractable thumb loops for easy donning without loose loops interfering with wrist seals Every suit comes with a lightweight drysac, ideal for keeping the undersuit and other items dry amongst wet dive gear Sizes XS S M L XL 2XL 3XL Sizes S M L XL 2XL 3XL 132

30 TEK SHORTS code: tek gloves code: To be worn on top of a wet suit or alone in warm water Made of the same material as the XR1 dry suit including Kevlar Non-floating, fast draining and fast drying Ultra-light but extremely resistant Same pockets as the XR1 dry suit Unisex 3 UNCOVERED FINGERS (thumb, index, middle) Double-lined neoprene, with Amara 2 mm inserts No velcro strap BEST DESIGN FOR MAINTAINING TOUCH WHEN 'BLIND' DIVING Thickness 2 mm Sizes XS S M L XL 2XL DETAILS Sizes XS S M L XL 2XL 3XL 133

31 accessories

32 Essence code: Power Plana code: Essence mask with neoprene/nylon strap Liquidskin for great comfort and ample field of vision Quick-adjusting buckles on the skirt Neoprene nylon strap to avoid the risk of breaking The strap is also sold alone as an accessory (see below) Light, flat foldable, easy to store in a pocket High-quality natural rubber with reinforced ribs Made of nearly indestructible natural rubber, this high performing fin is ideal for all kinds of kicks, particularly frog kicks The high density material makes the fins negatively buoyant, a desired feature when using a dry suit and a tech rig with steel plate Unlike competitors fins, the Mares rubber fin offers a full-shape foot pocket 2 colors: black and silver Match strap/fin sizes: Fin size S with strap size R Fin size R with strap size XL Fin size XL with strap size XXL Fin size XXL with strap size XXL Weight 185 g Sizes S R XL XXL mask strap code: Spring strap for tec fin code: Spring with wrap around nylon puller & safety chord the best solution for technical and cold water diving sold as a pair Sizes R XL XXL 135

33 DCT CANISTER LIGHT DCTV CANISTER LIGHT code: code: degree narrow LED diving flashlight 3*Cree XM-L2 (U4), max 3200 lumens output 3*26650 rechargeable lithium battery, max runtime reaches to 27h Regulated power maintains constant current output Overheat protection function - Reverse polarity battery protection Magnetic switch Three O-rings design to ensure waterproof function underwater down to 200 meters Al T6061-T6 aircraft-grade aluminum - Premium type III military hard-anodized 5 mm toughened glass Standard accessories: spare O-rings, lanyard, user manual and plastic box 120 degree narrow LED diving flashlight 6*Cree XM-L2 (U4), max 3400 lumens output 3*26650 rechargeable lithium battery, max runtime reaches 23h Regulated power maintains constant current output Over-heat protection function - Reverse polarity battery protection Magnetic switch Three O-rings designed to ensure waterproof function underwater down to 200 meters Premium type III military hard-anodized Al T6061-T6 aircraft-grade aluminum 5 mm toughened glass Standard accessories: spare O-rings, lanyard, user manual and plastic box ANSI High Medium Low Very low Strobe Lumen Output 3200lm 2000lm 1000lm 230lm 3200lm Runtime (3*26650) 2.1hours 3.2hours 6.5hours 27hours / Luminous Intensity cd Beam Distance 396 m Drop Resistance 1.5 m Waterproof Grade IPX-8, Underwater 200 m Dimension Head: 66 (Dia)*73 (L)mm; Canister: 37 (Dia)*245 (L)mm Net Weight 754g (excluding battery) Underwater Weight 200g (excluding battery) ANSI High Medium Low Very low Strobe Lumen Output 3400lm 2100lm 1000lm 230lm 3400lm Runtime (3*26650) 1.9hours 3.1hours 6.2hours 23hours / Luminous Intensity 1300 cd Beam Distance 72 m Drop Resistance 1.5 m Waterproof Grade IPX-8, Underwater 200 m Dimension Head: 66 (Dia)*73 (L)mm; Canister: 37 (Dia)*245 (L)mm Net Weight 740g (excluding battery) Underwater Weight 210 (excluding battery) Notice: The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. Notice: The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. 136

34 DCTS CANISTER LIGHT BACK UP LIGHT code: code: degree narrow LED diving flashlight 3*Cree XM-L2 (U4), max 2000 lumens output 2*26650 rechargeable lithium battery, max runtime reaches 21h Regulated power maintains constant current output Over-heat protection function - Reverse polarity battery protection Magnetic switch Three O-rings designed to ensure waterproof function underwater to 200 meters Al T6061-T6 Aircraft-grade aluminum - Premium type III military hard-anodized 5 mm toughened glass Standard accessories: spare O-rings, lanyard, user manual and plastic box THE LIGHT YOU DEPEND ON IF YOUR PRIMARY FAILS TOUGH, VERY COMPACT AND SUPER BRIGHT DELRIN BODY AND ALUMINUM HEAD, CAN BE USED TO 100M DEEP 8 ANGLE, CONVENIENT FOR LOW VISIBILITY ANSI High Medium Low Very low Strobe Lumen Output 2000lm 1200lm 550lm 135lm 2000lm Runtime (2*26650) 2.0hours 3.2hours 6.5hours 21hours / Luminous Intensity Beam Distance Drop Resistance Waterproof Grade Dimension Net Weight Underwater Weight cd 300 m 1.5 m IPX-8, Underwater 200 m Head: 66 (Dia)*73 (L)mm; Canister: 37 (Dia)*175 (L)mm 700g (excluding battery) 210g (excluding battery) Notice: The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. 142 mm Battery 1 ICR (2600mAh) Led 1 XML2 U2 Beam Angle 8 degrees Maximum Lumen 850 Beam Distance 220 m 1m LUX Waterproof Grade IPX-8, Underwater 100 m Burn Time 2.25 hours Charge Time 4-5 hours Dimension 34x142 mm Weight 85 grams 137

35 Dry backpack code: rigid cap code: Reinforced black PVC - Heat-sealed stitching Quick closure comfort pads chest buckle Fully waterproof sack, ideal for keeping your clothing and equipment dry On your more RUGGED ADVENTURES this backpack is perfect FOR CARRYING regulators or complete cave equipment and accessories Totally neutral in water Super light, fast drainage foam One size that fits most Adjustable soft nylon chin strap Quick disconnect buckle Suitable for mounting backup lights, LED primary lights or a GoPro camera Caution: The Rigid Cap offers minimal impact protection Dimensions (LxWxH) 35x20x60 cm Volume 30 L wetnotes code: Cover made from durable 2250D PU coated ballistic nylon Clear-window pockets on the inside and outside with velcro closure of the back cover for important items such as tables, checklists, compass etc. and inner front cover inside pocket Contains 23 pages of reusable waterproof plastic foil sheaths (w/ 6 tables) Material: Replaceable plastic foil sheaths with 1000 denier nylon cover Elastic pencil holders + storage space for pencil + graphite pencil Elastic bookmark allows to mark a PAGE for quick reference Elastic secure closure loop Elastic shockcord attachment for bolt snap Ideal for underwater communication, for decostops and for making notes CAN FIT SSI CUE-CARDS Hand compass code: Navigation (North) code: Navigation (South) Compass with bungee holder and extra long elastomeric bungee cords Side and top reading Luminescent glow in the dark internal dial Dual rotating index marks for easier reciprocal navigation Oversized for extreme use (low visibility, cave, night ) Dimensions Close Dimensions Open 200 mm x 125 mm x 15 mm 200 mm 250 mm x 15 mm 138

36 Dead Bolt Snap code: mm code: mm High quality marine grade 316 stainless steel Mares XR laser engraved CORROSION AND RUST RESISTANT swiveling bases making them easy to use Small snaps are ideal for attaching to items you can see, e.g. back up lights, LONG REGULATOR HOSE, canister light, SPG etc. Large snaps are great for cold water use where thick gloves make manipulation difficult Double Ender code: mm code: mm code: mm High quality marine grade 316 stainless steel Mares XR laser engraved CORROSION AND RUST RESISTANT easy to use even with dry gloves To clip away gear inside dry suit pockets To temporarily stow a canister light head TO ATTACH A PRIMARY REEL, A SPOOL, WET NOTES OR A SPARE MASK AND USE A STAGE LEASH ETC. Sizes 75 mm 120 mm Sizes 90 mm 100 mm 120 mm Hand Line-Cutter code: β Titanium Hand Line-Cutter code: Ceramic β Titanium Alloy - HRC 51 ± : S/L Excellent abrasion and corrosion resistance VELCRO HANDLE dedicated bag S/S Ultra sharp, abrasion and corrosion resistance VELCRO HANDLE dedicated bag 139

37 lines and markers coated s-spools code: m code: m Developed for divers who like spools for use with SMBs and divers with small hands or not using gloves Soft touch, comfortable grip and small size Red line for high visibility in clear waters Slightly heavier for better grip Sizes 15 m / 49 ft 30 m / 98 ft CAVE spools code: m code: m code: m Stainless Steel marine grade 316 Made from Edelrid Double ender: 316 Stainless Steel Technical but versatile enough to be used in a range of diving applications Unique flared design to allow ease of winding whilst wearing gloves A large diameter center hole for use in cold water whilst wearing gloves Rugged construction. Welded Stainless Steel marine grade 316 Spool is not over-wound, enabling additional line to be added if required Includes 316 stainless steel double ender Easy-release pull tabs High quality, high visibility line for low light conditions Complemented by a range of line markers and cookies Sizes 15 m / 49 ft 30 m / 98 ft 45 m / 148 ft 140

38 Cave LineS MADE FROM INJECTION MOLDED, DURABLE ABS Supplied in packs of 5 Unique technical design with: Corners removed for ease of use, Line guiding curves and grooves, Holes for ring/identifier clipping, Dedicated surface for marking Used for orientation as a visual and tactile reference on a guideline 3 different types are available: Line Arrows to indicate direction, Cookies to denote a junction, Non-Directional Markers reference a specific spot Cave Line Markers Cave Line Cookies Cave Line Arrows code: code: code: WH OR GN WH OR GN WH OR GN reels code: Primary m code: Safety / Back Up - 60 m 6061 marine grade anodized aluminum alloy handle Hard-coat finished Precision-fit handle - Delrin flares precisely adjusted Knurled stainless steel 316 marine lock-down screw Stainless steel 316 marine double ended bolt snap White braided nylon line Cold water / dry gloves puller DESIGNED FOR WRECKS, CAVES AND DEMANDING DIVES Excellent quality and optimized design entanglement free Thousands of hours of testing in recreational, technical, and cave diving environments Consistently proven reliability with a unique and trouble-free design Primary Sizes 60 m / 200 ft 120 m / 400 ft Safety / Back Up 141

39 SMBs code: SMB Regular code: SMB Emergency Width: 15cm Total length: 1.80m (inflatable section: 1.40m) Lift: 12kg Welded and double stitched TRANSPARENT WINDOW AT THE TOP FOR INSERTING WETNOTE MESSAGES OR GLOW STICKS Marked with Coast Guard approved SOLAS reflective tape Available in orange (standard) or yellow (emergency) One-way valve for LP connector or 1 breath inflation Stainless Steel D-ring and bungee attached Over-pressure valve (OPV) Integrated pressure-relief valve, allowing them to be deployed from depth One-way valve for oral inflation or LP hose connection - easily inflated at depth Available in yellow or orange: one color to mark position and one to mark emergencies Inflate at the surface to attract attention or at depth to send up as a surface marker Reflective tape on the top When deflated fits in a thigh pocket or backplate storage area SMBs code: SMB Training Orange 1 breath training SMB orange Oral inflation + OPV 3,3ft (1m) 10cm width - 6lb (2,7kg) lift 210D nylon with TPU lamination OPV retainer and tube in TPU metal parts instainless steel 304 Lift Bag code: Welded and double stitched 30kg / 80 lb lift capacity Available only in safety-orange color, easy to spot by surface or air traffic One-way valve for LP connector Stainless Steel D-ring on top and bottom and bungee attached on the bottom Over-pressure valve (OPV) allows for precise adjustment during lift operations with long puller Essential for a range of diving activities: from salvage and signaling to redundant lift and emergency flotation Provides the most reliable source of redundant buoyancy at depth or on the surface Eliminates the chance that gas will escape from your lift bag during ascent or while on the surface 142

40 PROMO MATERIAL display black tank 12l code: PEN FLAG code: Black Diameter: 170 mm - Circumference: 542 mm - Height: 645 mm Tank neck thread: M25x2 EN No valve supplied Weight: 1.8 kg Mares logo on one side and Mares XR logo on the opposite side height 1,80 m 100% NYLON POLO code: FLAG code: % cotton sizes: s/m/l/xl/xxl size: 140x90 cm STICKER code: size: 20x5 cm 143