Why It s Worth a Look

Transcription

1

2 Why It s Worth a Look Engineered for performance fabrics Ultimate stretch and recovery Matte finish Patterns offer differentiating graphic/market relevant aesthetic Soft hand feel Abrasion resistant Withstands high heat wash Water resistant

3 / CORE COLORS Snow Grey Ash Gold TPX TPX TPX 871C Navy Black Pitch Red TPX TPX TPX TPX Orange Electric Metallic Silver Metallic Gold TPX 285C 877C 871C EXO / 1

4 TECHNICAL INFORMATION EXOFLEX EXO3900 EXO523 1 MATERIAL Thermoplastic Polyurethane Thermoplastic Polyurethane STOCKED WIDTH 475 mm 1422 mm GAUGE 75 µm (.003 ) 75 µm (.003 ) WEIGHT 90 g/m g/m 2 CARRIER Release Paper Matte Release Paper ADHESIVE SOFTENING POINT 102 C (216 F) 102 C (216 F) ADHESIVE MELT FLOW INDEX 20 dg/min at 150 C / 2.16 kg 20 dg/min at 150 C / 2.16 kg ABRASION RESISTANCE 2 Excellent Excellent SERVICE TEMPERATURE 40 C to 75 C ( 40 F to 167 F) 40 C to 75 C ( 40 F to 167 F) WASH Excellent up to 60 C Excellent up to 60 C HAND Soft Soft INITIAL BONDING CONDITIONS 3 FLAT PRESS TEMPERATURE 130 C to 155 C 130 C to 155 C TIME 15 to 30 seconds 15 to 30 seconds PRESSURE 2.8 to 5.5 bar (40 to 80 psi) 2.8 to 5.5 bar (40 to 80 psi) CONTINUOUS BONDING MACHINE TEMPERATURE 200 C to 250 C 200 C to 250 C SPEED 1.5 to 2.0 m/min 1.5 to 2.0 m/min PRESSURE 1.0 bar (14.5 psi) 1.0 bar (14.5 psi) 1 Only available in Black, Pitch, Grey and Snow. 2 Taber Test ASTM Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal bonding conditions should be established by the factory of the specific application. NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such warranties. Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, or misuse or inability to use this product.

5 / CORE COLORS Rose Pearl Essence Pink Pearl Essence Bright Purple Pearl Essence Bright Blue Pearl Essence Bright Green Pearl Essence Bright Gold Pearl Essence Nude Pearl Essence Carbon Pearl Essence Gold Pearl Essence Rusty Red Pearl Essence EXO / 2

6 / CORE PATTERNS Stainless Silver Flax (Silver/Silver) 877C/877C Silver Flax (Silver/Black) 877C/ Gold Flax (Gold/Gold) 871C/871C Navy Flax (Navy/Navy) TPX/ TPX Black Flax (Black/Black) Gold Desco (Gold/Gold) Desco (Silver/Black) TPX/ TPX 871C/871C 877C/ TPX EXO / 3

7 / CORE PATTERNS Silver Lodi Dotti (Silver/Silver) Gold Lodi Dotti (Gold/Gold) Pitch Lodi Dotti (Pitch/Pitch) Pitch Cobra (Pitch/Pitch) 877C/877C 871C/871C TPX/ TPX TPX/ TPX Billie Jean (Denim/Navy) Manila (Pitch/Pitch) TPX/ TPX TPX/ TPX EXO / 4

8 TECHNICAL INFORMATION EXOFLEX MATERIAL STOCKED WIDTH EXO3900 Thermoplastic Polyurethane 475 mm GAUGE 75 µm (.003 ) WEIGHT 90 g/m 2 CARRIER ADHESIVE SOFTENING POINT ADHESIVE MELT FLOW INDEX ABRASION RESISTANCE 1 SERVICE TEMPERATURE Release Paper 102 C (216 F) 20 dg/min at 150 C / 2.16 kg Excellent 40 C to 75 C ( 40 F to 167 F) WASH Excellent up to 60 C HAND Soft INITIAL BONDING CONDITIONS 2 FLAT PRESS TEMPERATURE 130 C to 155 C TIME PRESSURE 15 to 30 seconds 2.8 to 5.5 bar (40 to 80 psi) CONTINUOUS BONDING MACHINE TEMPERATURE 200 C to 250 C SPEED PRESSURE 1.5 to 2.0 m/min 1.0 bar (14.5 psi) 1 Taber Test ASTM Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal bonding conditions should be established by the factory of the specific application. NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such warranties. Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, or misuse or inability to use this product.