Selecting the correct protection

Transcription

1 All prices in this Catalogue exclude VAT Y PROTECTION Selecting the correct protection The selection of Respiratory Protection follows a basic four-step method: Identify the Hazards dust, metal fume, gas, vapour Assess the Hazards assess the hazard level/other protection skin and eye Select the proper Respirator disposable, half mask, full face, powered, airline Training in fitting and use to optimise respiratory protection Y HAZARDS Dusts produced when solid materials are broken down into finer particles, the longer the dust remains in the air the easier it is to inhale. Mists tiny liquid droplets formed by atomisation and condensation processes such as spraying. Mists are often combinations of several hazardous ingredients. Metal fumes occur when metals are vaporised under high heat. The vapour is cooled quickly and condenses into very fine particles that float in the air. Gases airborne at room temperature. Able to diffuse or spread freely, can travel very far very quickly. Vapours gaseous state of substances that are liquids or solids at room temperature. Formed when substances evaporate in the way water vapour evaporates from water. Legislation Update Amended Standard EN-19:2001+A1:2009 EN 19:2001 was superseded by an amended version, EN 19:2001+A1:2009 (EN 19+A1) in July Changes included the introduction of two usability classifications for disposable respirators; single shift only devices nonreusable (shown through marking NR ) and reusable devices (marked R ). The amended European Standard EN 19:2001+A1:2009 states that all reusable devices (marked R ) must withstand being cleaned and disinfected using a method provided by the manufacturer. This change, along with new performance requirements, is intended to give the user further confidence in respirators providing continuous respiratory protection in hazardous environments. All particle filtering half masks featured fully conform to EN 19:2001+A1:2009 Disposable respirators that have passed the optional Dolomite clogging test have a suffix D listed in their conformity standards. 3

2 TYPES OF Y PROTECTIVE EQUIPMENT (RPE) Each type of RPE has specific limitations which dictate the types of application for which it may be used. RPE is tested to relevant European Standards which determines the product performance. Y TERMINOLOGY PARTICULATE GAS & VAPOUR POWERED AIRLINE Workplace Exposure Limit (WEL) Airborne concentration of a Hazardous Substance, averaged over a specified time period referred to as a Time Weighted Average (TWA). WEL Time Periods There are two reference periods for which WELs may be set; 8 hour Time Weighted Average (TWA) and 15 minute Short Term Exposure Limit (STEL). A substance may be assigned WELs at either one or both reference periods. 8 hour TWA some adverse health effects can occur after prolonged or accumulated exposure. The 8 hour TWA is set to restrict the total intake by inhalation over one or more shifts. 15 minute STEL Some adverse health effects may be seen after short exposures. 15 minute STEL may be applied to control these effects. Immediately Dangerous to Life or Health (IDLH) The IDLH concentration of a substance is defined as that which poses a threat of exposure to airborne contaminants when that exposure is likely to cause death or immediate or delayed permanent adverse health effects or prevent escape from such an environment. The IDLH value represents a maximum concentration from which a worker would escape within 30 minutes without any impairing symptoms or irreversible health effects. FILTER MARKINGS For use against Gas and Vapour (EN 1387 and EN 05) Particles (EN 13 and EN 19) Gas and Vapour (EN 371) NEGATIVE PRESSURE maintenance free & reusable AIR PURIFYING S Odour Threshold The concentration of a substance at which the majority of individuals can smell or taste it. FIT TESTING OF RPE FACEPIECES From November 2002 the CoSHH regulations and associated ACOP require employers of wearers of tight fitting facepieces to conduct a fit test to assess the degree of face seal leakage of that respirator to the wearer. Tight fitting facepieces include disposable particulate respirators, half and full face masks with filters. A fit test should also be conducted on powered and airfed respirators which include a tight fitting facepiece. If a full facepiece is being used the HSE recommend a Quantitative fit test be conducted. This is usually carried out by a suitably qualified outside agency or competent person. If any other device is used, e.g. filtering facepieces FFP1/2/3 or half face mask respirators fitted with a particulate or combined filter, a Qualitative test can be conducted, which is normally carried out in-house. For further information, please read the HSE document Fit Testing of Respiratory Protective Facepieces HSE 282/28. Filter Colour Type Code Main Applications A Brown Organic Vapours with boiling point greater than 65 C and good warning properties B Grey Inorganic gases and vapours, e.g. Chlorine (not Carbon Monoxide) E Yellow Acid gases and vapours, e.g. Sulphur Dioxide, Hydrogen Chloride K Green Ammonia and organic ammonia derivatives P White Particulate P1 White Protection against particulates P2 White Protection against particulates P3 White Protection against particulates AX Brown Certain organic compounds with boiling points less than 65 C & good warning properties POSITIVE PRESSURE Y PROTECTIVE EQUIPMENT RPE SELECTION CALCULATION Personal Air Monitoring information, when compared to the relevant WEL for that hazardous substance, helps to more accurately determine the required level of respirator protection factor. For example: Woodworking ❶ Measured Levels (Wood Dust) = 60mg/m3 over 8 hours TWA. ❷ Workplace Exposure Limit (WEL) for wood = 5mg/m3. ❸ Divide ❶ by ❷ = 60 = ➍ This figure of 12 is the level at which the hazard is above the WEL, i.e. the Hazard Level is 12 WEL. ❺ Assuming all other control measures have been considered, including the eight new principles of good practice, select a respirator with an Assigned Protection Factor (APF) greater than 12 (e.g. 3M which has an APF of 20). ❻ Ask yourself the further question Do I need to lower levels as far below the WEL as is reasonably practicable? i.e. is this substance one of the group of substances that can cause cancer, sensitisation or heritable genetic change? In this case, wood dust is a carcinogen and therefore levels should be lowered as far below the WEL as is reasonably practicable. Therefore, if all other control measures have been considered, an even higher performing respiratory protection product should be contemplated. However, always remember that RPE should be the last resort and that one of the main principles of RPE selection should be that it is suitable to the job and the wearer. POSITIVE PRESSURE SUPPLIED AIR S EUROPEAN STANDARDS Respirators are tested to the relevant European Standards and CE marked. All respirators carry the CE mark plus the European Standard and performance category markings. EN19 Filtering facepiece and particulate respirators EN05 Valved filtering half mask respirators for gases and/or particulates EN10 Halfmask facepieces EN136 Full facepieces EN137 Self-contained opencircuit compressed air breathing apparatus EN13 Particulate filters EN16 Powered Respirators Hoods & Helmets EN17 Powered Full Face Masks EN270 Heavy Duty Supplied Air EN371 Gas and/or combined filters for use against low boiling organic compounds EN02 Escape Apparatus. SCBA with full face mask or mouthpiece assembly EN529 Respiratory selection, use and care EN116 Compressed air escape apparatus with hood EN1835 Light Duty Supplied Air EN1291 Powered Respirators Hoods and Helmets EN1292 Powered Respirator Full Face Masks EN1387 Gas & vapour filters Y PROTECTION 35

3 All prices in this Catalogue exclude VAT Y PROTECTION Classic DISPOSABLE PARTICULATE S Selecting and specifying the appropriate Respiratory Protective Equipment may appear daunting, with multiple factors to consider the equipment needs to not only provide appropriate protection for the job, but also be comfortable enough for the individual user to wear during the whole period of exposure. To help make the selection of a 3M disposable respirator easier, 3M has reorganised the range into three categories. Our respirators are classified in the following three categories: Premium Our top of the range respirators. The Premium range of 3M respirators offers advanced features including a lightweight, cup-shaped off-the-face design, providing excellent wearer comfort as well as higher levels of protection. Cool Flow valved and with effective protection against dust, mist and metal fumes, this superior series is available in FFP2 and FFP3. Comfort Our built for comfort respirators. Available in cup-shaped and flat fold designs, the Comfort range sets the benchmark in wearer comfort. With effective protection against dust and mist as standard, and additional metal fume protection from the FFP3 product, the Comfort range is a popular choice both Cool Flow valved and unvalved. Available in FFP1, FFP2 and FFP3, for a comfortable wear to suit all your respirator needs. Our most affordable respirators. The Classic range of cup-shaped and flat fold respirators offers simple and effective protection against dust and mist. Cost effective Classic respirators are available unvalved or with Cool Flow valve incorporated. Available in FFP1 and FFP2 to suit all your basic respirator needs. Now follow our three-stage selection process: STAGE ONE Which protection factor suits your needs? FFP1 Respirators FFP2 Respirators FFP3 Respirators Speciality Respirators Protection factor APF APF 10 APF 20 APF or 10 Typical applications Easy identification Low level fine dust/oil or water based mists (hand sanding, drilling and cutting) Identified by YELLOW straps or noseclip Moderate level fine dust/oil or water based mists (plastering, sanding and wood dust) Identified by BLUE straps, noseclip or valve lettering Higher level fine dust/oil or water based mists (hazardous pharmaceutical powders, biological agents and fibres) Identified by RED straps, noseclip or valve lettering Fine dust/oil or water based mists. Options for metal fume, ozone and nuisance levels of certain gases and vapours dependent on model Protection level can be identified by the strap colour or valve lettering Classification explained: APF = Assigned Protection Factor. When correctly used by a wearer who has passed a face fit test, an FFP1 respirator should reduce exposure to airborne particles by a factor of, an FFP2 by a factor of 10 and an FFP3 by a factor of 20. STAGE TWO STAGE THREE What style? Choose from our Premium, Comfort or Classic ranges or a Welding or Speciality respirator for specific applications. Some of our ranges offer a cup-shaped and fold flat respirator for your preference. Particulate Respirator Options FFP1 FFP2 FFP3 Unvalved Valved Unvalved Valved Valved Premium Cup-shaped Comfort Cup-shaped Flat fold Classic Cup-shaped Welding Cup-shaped - - Speciality Cup-shaped Flat fold Choose a valved or unvalved respirator

4 3M FFP1 S Protection Factor: APF Typical Applications: Low levels (up to x WEL) of fine dust and oil or water-based mists typically found during hand sanding, drilling and cutting. All particle filtering half masks featured fully conform to EN 19:2001+A1:2009 Easy Identification: 3M FFP1 Respirators are easy to recognise by their YELLOW straps 3M FFP1 CLASSIC S FEATURED PRODUCT The 3M 8300 Comfort Respirator Series 3M FFP1 COMFORT S M-Noseclip The noseclip is quick and easy for wearers to mould around the nose, offering greater comfort High Performance Filter Material 3M Advanced Electret filter material helps wearers to breathe easily for more comfortable protection 3M Cool Flow Valve The Cool Flow Valve reduces heat build-up to offer workers comfortable protection even in hot and humid conditions Cushion-Fit Lining The cushioned inner lining helps workers stay comfortable Braided Headbands Materials have been selected for extra comfort and durability Y PROTECTION 3M 8710E CUP-SHAPED DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Protection against fine respirable dusts. Assigned Protection Factor = Code: Box of M 8310 CUP-SHAPED DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Protects against fine respirable dusts. 3M Advanced Electret filter material helps wearers to breathe easily through the respirator for more comfortable protection. A cushioned lining, braided headbands and M-Noseclip offer extra comfort. Assigned protection factor = Code: 2921 Box of M AURA TM FFP1 FLAT FOLD DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Protection against fine respirable dusts. Individually packed, this fold flat respirator features a 3 panel design and soft cover web for greater comfort and good fit. Assigned Protection Factor = Code: Box of M 8812 CUP-SHAPED VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Protection against fine respirable dusts with 3M Cool Flow valve for wearer comfort. Assigned Protection Factor = Code: Box of M 8312 CUP-SHAPED VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Protects against fine respirable dusts. Fitted with a 3M Cool Flow valve. A cushioned lining, braided headbands and M-Noseclip offer extra comfort. Assigned protection factor = Code: Box of M AURA TM FFP1 FLAT FOLD VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP1 NR D Individually packed fold flat respirator. 3-panel design and soft cover web for greater comfort and good fit. Incorporates the 3M Cool Flow exhalation valve for even greater wearer comfort! Assigned Protection Factor = Code: 2927 Box of

5 All prices in this Catalogue exclude VAT Y PROTECTION 38 Economy Respirators This cost effective product range has been developed for use when economy is a main concern. The products are all produced to high standards and ensures the wearer excellent comfort and protection. Fold Flat Respirators Respair Fold Flat is a vertically folded and individually wrapped single use lightweight disposable respirator for protection against non toxic and toxic particles. The nose clip ensure a good sealed fit. Unique filter material offers low breathing resistance. Comfort Mesh Respirators The ultimate in comfort, being of lightweight construction, the products offers extremely low breathing resistance offering the wearer total comfort. The unique outer support shell ensures that the mask will not collapse during use, particulary important in hot and humid conditions. FFP1 Y E P1 MASK Adjustable nose clip P1 MASK Adjustable nose clip Lightweight design Comfortable design E P1V MASK P1V MASK Colour coded valve Colour coded valve Adjustable straps RESPAIR ECONOMY P1 VALVED AND UNVALVED Conforms to EN19 : A1: 2009 (NR). APF Comfortable design RESPAIR FFP1 ECONOMY RANGE. Protects against solid & liquid particles including oil based mists. RESPAIR E P1V - UNVALVED Code: Box of RESPAIR E P1V - VALVED Code: Box of RESPAIR P1 FOLD FLAT DISPOSABLE S Conforms to EN 19: A1: 2009 (NR). APF Lightweight, only 2g. Multi layered filter medium combining electrostatic charge. Unique filter material provides an extremely low breathing resistance. Ergonomically shaped for comfort and ease of use. Allows freedom of speech. Easy fit minimising leakage. Complete compatibility with all other forms of protective equipment. Adjustable head straps to provide individual fit. Adjustable nose clip to ensure good seal around nose. Colour coded for ease of identification. Non-allergenic. Protects against solid & liquid particles including oil based mists. RESPAIR P1 - UNVALVED Code: Box of RESPAIR P1V - VALVED Code: 3016 Box of

6 Whatever your industrial application; painting, welding, carpentry, metal processing or chemical handling, your safety is Dräger s prime objective. For more than 100 years Dräger products have helped keep people breathing safely. CoolSAFE - Filter Material combines low breathing resistance with high filter performance and meets the requirements of the dolomite dust test VarioFLEX - Head Harness continuous loop robust, tear resistant elasticated textile strap for easy donning and comfortable fit CoolMAX - Exhalation Valve (optional) where featured the exhalation valve provides extremely low breathing resistance and prevents heat build-up within the face piece KEEP SAFE FFP1 DISPOSABLE S A range of reliable quality moulded disposable respirators designed to protect the wearer against solid aerosols, dust, mists, powders and accompanying odours. All particle filtering half masks featured fully conform to EN 19:2001+A1:2009. Available in: Moulded Cup Fold Flat (individually packed within carton) Comfort Fit Soft seal comfort fit Adjustable nose piece Staple free Y PROTECTION High Performance Filter Material Lower breathing resistance FEATURED PRODUCT The Keep Safe FFP1 moulded respirator DRäGER X-PLORE FFP1 MOULDED RANGE Conforms to EN 19: A1: 2009 FFP1 NR D. Pre-formed respirator offering comfort and secure fitting. Provides protection against fine dust, and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries. CoolMAX exhalation valve offering easy breathing, comfort (1310V ONLY) Assigned Protection Factor = Code: 3108 Box of V Code: Box of KEEP SAFE FFP1 MOULDED CONFORMS TO EN 19:2001 FFP1 NR Protection against fine non-toxic dusts and fumes. Suitable for use with dusts generated from construction, brick and clay dust, sanding and agricultural uses such as with animal feeds, grain, hay and pollen. Assigned Protection Factor = Code: Pack of KEEP SAFE FFP1 FOLD FLAT CONFORMS TO EN 19:2001 FFP1 NR Protection against fine non-toxic dusts and fumes. Suitable for use with dusts generated from construction, brick and clay dust, sanding and agricultural uses such as with animal feeds, grain, hay and pollen. Individually packed. Assigned Protection Factor = Code: Pack of DRäGER X-PLORE FFP1 FOLD FLAT RANGE Conforms to EN 19: A1: 2009 FFP1 NR D. Fold Flat respirator offering comfort and secure fitting ProvideS protection against fine dust and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries. CoolMAX exhalation valve offering easy breathing, comfort (1710V ONLY) Assigned Protection Factor = 1710 Code: Box of V Code: Box of KEEP SAFE FFP1 DISPOSABLE Protection against fine non-toxic dusts and fumes. Suitable for use with dusts generated from construction, brick and clay dust, sanding and agricultural uses such as with animal feeds, grain, hay and pollen. Individually packed within carton. Assigned Protection Factor = Code: Box of

7 FEATURED PRODUCT All prices in this Catalogue exclude VAT Y PROTECTION 0 3M FFP2 S Protection Factor: APF 10 Typical Applications: Moderate levels of fine dust (up to 10 x WEL) and oil or water based mists typically found during plastering, cement, sanding and wood dust. All particuate filtering disposable masks featured fully conform to EN 19:2001+A1:2009 Easy Identification: 3M FFP2 Respirators are easy to recognise by their BLUE colour coded features (either headbands or lettering on the valve) 3M FFP2 CLASSIC S 3M 8810 CUP-SHAPED DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D This respirator provides protection against fine dusts, water-based mists and oil based mists. The convex shape, conforms to most face shapes and sizes. Code: Box of M 8822 CUP-SHAPED VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D This respirator provides protection against fine dusts, water-based mists and oil based mists. The convex shape and 3M Cool Flow valve reduce heat build-up to offer comfortable protection particularly in hot and humid conditions. Code: Box of M FFP2 COMFORT S 3M 8320 CUP-SHAPED DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D Provides protection against fine dusts, water-based mists and oil based mists. 3M Advanced Electret filter material helps wearers to breathe easily through the respirator for more comfortable protection. A cushioned lining, braided headbands and M-noseclip offer extra comfort. Code: Box of M 8322 CUP-SHAPED VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D Provides protection against fine dusts, water-based mists and oil based mists. Fitted with a 3M Cool Flow valve. A cushioned lining, braided headbands and M-noseclip offer extra comfort. Code: Box of M AURA FFP2 FLAT FOLD DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D Individually packed flat fold respirator. 3-panel design and soft cover web for greater comfort and better fit. Code: Box of M AURA FFP2 FLAT FOLD VALVED DUST/MIST CONFORMS TO EN 19:2001 FFP2 NR D Individually packed flat fold respirator. 3-panel design and soft cover web for greater comfort and better fit. Incorporates the 3M Cool Flow exhalation valve for even greater wearer comfort. Code: Box of The NEW 3M Aura Series, Flat Fold Comfort Respirators Face & Head Comfort Unique 3M 3-Panel flat fold design Embossed top panel helps prevent the misting of eyewear Sculpted nose fit for improved compatibility with eyewear High Performance Filter Media NEW low breathing resistance filter technology combines effective filter performance with lower breathing resistance 3M Cool Flow Valve The Cool Flow Valve reduces heat build-up inside the respirator for a cooler and more comfortable wear Lightweight Low tension, odour-free headband Skin Comfort Chin tab, improves the ease of donning and doffing adjustment Accommodates your facial movements Flat fold and individually wrapped 3M FFP2 PREMIUM S 3M 8825 BUCKLE STRAP DUST/MIST CONFORMS TO EN 19:2001 FFP2 R D Provides comfortable, effective respiratory protection against fine dusts, oil and water-based mists and metal fumes. The 3M Cool Flow valve, 3M Advanced Electret filter media, soft sealing ring and adjustable buckle straps ensure a comfortable, confident fit. Cleanable sealing ring and additional D Dolomite anticlogging test allows use for longer than one shift. Code: 2925 Box of For further information on 3M Respiratory Protection please visit or call the helpline on (9am-5pm Monday to Friday).

8 Economy Respirators This cost effective product range has been developed for use when economy is a main concern. The products are all produced to high standards and ensures the wearer excellent comfort and protection. Fold Flat Respirators Respair Fold Flat is a vertically folded and individually wrapped single use lightweight disposable respirator for protection against non toxic and toxic particles. The nose clip ensure a good sealed fit. Unique filter material offers low breathing resistance. FFP2 S C P2 MASK Whatever your industrial application; painting, welding, carpentry, metal processing or chemical handling, your safety is Dräger s prime objective. For more than 100 years Dräger products have helped keep people breathing safely. CoolSAFE - Filter Material combines low breathing resistance with high filter performance and meets the requirements of the dolomite dust test VarioFLEX - Head Harness continuous loop robust, tear resistant elasticated textile strap for easy donning and comfortable fit CoolMAX - Exhalation Valve (optional) where featured the exhalation valve provides extremely low breathing resistance and prevents heat build-up within the face piece FFP2 S Y PROTECTION RESPAIR FFP2 CUP RANGE CONFORMS TO EN 19:2001 +A1:2009 (NR) APF 10 Hazardous dusts & fine dust particles. RESPAIR C P2V - VALVED Code: Box of RESPAIR C P2 - UNVALVED Code: Box of P2 MASK RESPAIR FFP2 FOLD FLAT RANGE CONFORMS TO EN 19:2001 +A1:2009 (NR) APF 10 Hazardous dusts & fine dust particles RESPAIR P2V - VALVED Code: 3080 Box of RESPAIR P2 - UNVALVED Code: Box of DRäGER X-PLORE FFP2 MOULDED RANGE CONFORMS TO EN 19:2001 +A1:2009 (NR) D Preformed respirator offering comfort and secure fitting. Provides protection against fine dust, and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries. CoolMAX exhalation valve offering easy breathing, comfort (1320V ONLY) APF UNVALVED Code: Box of V - VALVED Code: Box of E P2 MASK RESPAIR FFP2 ECONOMY RANGE CONFORMS TO EN 19:2001 +A1:2009 (NR) APF 10 Hazardous dusts & fine dust particles RESPAIR E P2V - VALVED Code: Box of RESPAIR E P2 - UNVALVED Code: Box of DRäGER X-PLORE FFP2 FOLD FLAT RANGE CONFORMS TO EN 19:2001 +A1:2009 (NR) D Fold Flat respirator offering comfort and secure fitting. Provides protection against fine dust, and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries. CoolMAX exhalation valve offering easy breathing, comfort (1720V ONLY) APF UNVALVED Code: Box of V - VALVED Code: 3109 Box of

9 3M FFP2 WELDING S All prices in this Catalogue exclude VAT Y PROTECTION 2 The 3M 9925 and 3M 9928 Welding Fume Respirators provide lightweight, comfortable and hygienic respiratory protection against dust, mist and metal fumes; the soft face seal incorporated in the 3M 9928 respirators differentiates the two. All particulate filtering disposable masks featured fully conform to EN 19:2001+A1:2009 FEATURED PRODUCT 3M 9928 VALVED SOFT SEAL WELDING FUME Robust Shell and Cup Design Flame retardant outer surface minimises the effect of welding splatter Conforms well to most face shapes and sizes Collapse-resistant Adjustable Braided Headbands Help provide comfort to face, head and neck Soft Inner Face-Seal Ring Provides secure feel Improves wearer comfort Can be hygienically cleaned (3M 105 Face Seal Cleaner) Colour Coded Valve Lettering Easy to recognise protection level by colour coding (BLUE = FFP2) 3M Cool Flow Valve Carbon Layer Provides protection against ozone gas (10 x WEL) and relief from nuisance level odours (below WEL) 3M 9928 VALVED SOFT SEAL WELDING FUME CONFORMS TO EN 19:2001 FFP2 R D Specially designed for welding applications, this respirator provides effective respiratory protection against oil- and water-based mists, fine dusts, metal fumes and ozone. Features the 3M Cool Flow valve as in the 3M 9925, but additionally includes a soft inner face seal ring which can be wiped clean if used for more than one shift. Code: Box of M 9925 VALVED WELDING FUME CONFORMS TO EN 19:2001 FFP2 NR D Specifically designed for welding applications, this respirator provides effective respiratory protection against water and oil-based mists, fine dusts, metal fumes and ozone. Features the 3M Cool Flow valve and adjustable straps to reduce heat and moisture build up to improve wearer comfort in a hot environment. Code: Box of FFP2 WELDING S RESPAIR WELDAIR P2V FOLD FLAT FACE MASK CONFORMS TO EN 19: A1:2009 (NR) APF 10. Welding fume/nuisance levels of ozone gas. WELDAIR P2V Code: Box of FFP2 S All particle filtering half masks featured fully conform to EN 19:2001+ A1:2009. MOLDEX 205 FFP2 NR D VALVED CONFORMS TO EN 19:2001 FFP2 NR D For use against toxic dusts, water-based mists and fumes. Ventex -valve reduces heat and humidity within the mask. Code: Box of

10 KEEP SAFE FFP2 CONFORMS TO EN 19:2001 FFP2 NR Protection against fine toxic dusts, fibres and aqueous mists. Suitable for use as FFP1, plus aluminium oxide, zinc oxide dusts, cement dust, grinding, agricultural, mining and petrochemical industries. Code: Pack of KEEP SAFE FFP2 DISPOSABLE S A range of reliable quality disposable respirators providing protection to the wearer from dust, mists, solid aerosols, powders and accompanying odours. All particle filtering half masks featured fully conform to EN 19:2001+A1:2009. FEATURE Fold-Flat FFP2 moulded respirator Available in: Moulded Cup Fold-Flat (individually packed within carton) Flexinet Lightweight and comfortable to wear Sealed individually so can be kept clean until used, fold-flat only Low breathing resistance for cooler use and better speech transmission Soft facial seal to minimise leakage but maximise comfort Styles available with exhalation valves for increased comfort and easier breathing Central valve for extra comfort Adjustable nose piece Elasticated straps Latex free Staple free High performance exhale valve Centrally positioned valve (where featured) keeps mask cooler and avoids CO 2 build-up High performance filter material Y PROTECTION KEEP SAFE FFP2 VALVED CONFORMS TO EN 19:2001 FFP2 NR Suitable for use as FFP2 (S) for protection against fine toxic dusts, fibres and aqueous mists, but with additional protection against oil-based mists or aerosols present when cutting oils/lubricants in use. Exhalation valve lessens heat build-up and provides greater comfort. Code: Pack of KEEP SAFE FFP2 FOLD-FLAT CONFORMS TO EN 19:2001 FFP2 NR Protection against fine toxic dusts, fibres and aqueous mists. Suitable for use as FFP1, plus aluminium oxide, zinc oxide dusts, cement dust, grinding, agricultural, mining and petrochemical industries. Individually packed. Code: Pack of KEEP SAFE FFP2 FLEXINET 3D DISPOSABLE CONFORMS TO EN 19:2001 FFP2 NR Offers protection against dust and water-based mists and fumes. Suitable for DIY jobs, brick and clay dust, woodworking, animal feed (hay and grain) and reduces symptoms of pollen allergies. Code: Box of KEEP SAFE FFP2 FOLD-FLAT VALVED CONFORMS TO EN 19:2001 FFP2 NR Protection against fine toxic dusts, fibres and aqueous mists with additional protection against oil-based mists or aerosols present when cutting oils/lubricants in use. Suitable for use as FFP2, but with an exhalation valve for interior heat reduction and greater comfort. Individually packed. Code: Pack of KEEP SAFE FLEXINET 3D FFP2 VALVED DISPOSABLE CONFORMS TO EN 19:2001 FFP2 NR Offers protection against fine dust, water and oil-based mists and fumes. Suitable for DIY, some manufacturing processes, refinishing and woodworking. Code: Box of FFP2 ECONOMY DISPOSABLE CONFORMS TO EN 19:2001 +A1:2009 (NR) Protection against fine non toxic dusts, fibre and aqueous mists. Suitable for use as FFP1. plus Aluminium Oxide, Zinc Oxide, cement dust, grinding agricultural mining, all petrochemical industries. Code: Box of FFP2 VALVED ECONOMY DISPOSABLE CONFORMS TO EN 19:2001 FFP2 Suitable for use as FFP2 with the added advantage of an exhalation valve. Lessens heat build up to provide greater comfort. Code: Box of

11 All prices in this Catalogue exclude VAT Y PROTECTION 3M FFP3 COMFORT S 3M 8833 CUP-SHAPED VALVED DUST/MIST/METAL FUME CONFORMS TO EN19:2001 FFP3 NR D The 3M Cool Flow valve reduces heat build up to offer comfortable protection, particularly in hot and humid conditions. Soft inner face-seal ring provides secure face fit and increases wearer comfort. Reliable, effective protection against fine particulates. Assigned Protection Factor = 20 Code: Box of M FFP3 S Protection Factor: APF 20 Typical Applications: Higher levels of fine dust (up to 20 x WEL) and oil or water based mists typically found when handling hazardous powders in the pharmaceutical industry or work with biological agents and fibres All particale filtering half masks featured fully conform to EN 19:2001+A1:2009 Easy Identification: 3M FFP3 Respirators are easy to recognise by their RED colour coded features (either headbands or lettering on the valve) 3M AURA FLAT FOLD VALVED DUST/ MIST/ METAL FUME CONFORMS TO EN 19:2001 FFP3 NR D Individually packed flat fold respirator. 3-panel design and soft cover web for greater comfort and good fit. Incorporates the 3M Cool Flow exhalation valve for even greater wearer comfort! Assigned Protection Factor = 20 Code: Box of FEATURED PRODUCT The 3M 8835 Premium Respirator! Advanced Comfort Soft inner face seal ring increases wearer comfort and can be wiped clean for use for more than one shift Adjustable braided headbands ensure a more secure feel and provides comfort to face, head and neck 3M Advanced Electret Filter Media Increased filter area helps extend the life of the respirator Higher capacity against dust Effective filtration combined with low breathing resistance 3M Cool Flow Valve Effective removal of heat and moisture build-up provides a cooler and more comfortable wear Removes exhaled air and minimises the risk of misting eyewear 3M FFP3 PREMIUM 3M 8835 VALVED SOFT SEAL DUST/MIST/METAL FUME CONFORMS TO EN 19:2001 FFP3 R D This valved respirator provides comfortable, effective respiratory protection against fine dusts, oil and water-based mists and metal fume. The 3M Cool Flow valve, soft sealing ring and adjustable straps ensure a comfortable, confident fit. Cleanable sealing ring and additional testing allows use for more than one shift. Assigned Protection Factor = 20 Code: Box of

12 Economy Respirators This cost effective product range has been developed for use when economy is a main concern. The products are all produced to high standards and ensures the wearer excellent comfort and protection. Fold Flat Respirators Respair Fold Flat is a vertically folded and individually wrapped single use lightweight disposable respirator for protection against non toxic and toxic particles. The nose clip ensure a good sealed fit. Unique filter material offers low breathing resistance. SLIMLINE S Slimline is a horizontally folded, individually wrapped respirator for protection against non toxic and toxic particles. The nose clip ensure a good sealed fit. Unique filter material offers low breathing resistance. FFP3 S Y PROTECTION RESPAIR C P3V CUP EN 19:2001 +A1:2009 (NR) APF 20 Toxic dusts & fine dust particles. Code: Box of RESPAIR P3V FOLD FLAT EN 19:2001 +A1:2009 (NR) APF 20 Toxic dusts & fine dust particles Code: Box of RESPAIR E P3V EN 19:2001 +A1:2009 (NR) APF 20 Toxic dusts & fine dust particles Code: Box of RESPAIR SLIMLINE FFP3 VALVED MASK EN 19:2001 +A1:2009 (NR) APF 20 Lightweight - g. Multi-layered filter. Ergonomically shaped. Protects against solid and liquid particles including oil base mists. Non allergenic. Exhalation valve for easier breathing. RESPAIR S P3V Code: Box of Whatever your industrial application; painting, welding, carpentry, metal processing or chemical handling, your safety is Dräger s prime objective. For more than 100 years Dräger products have helped keep people breathing safely. CoolSAFE - Filter Material combines low breathing resistance with high filter performance and meets the requirements of the dolomite dust test VarioFLEX - Head Harness continuous loop robust, tear resistant elasticated textile strap for easy donning and comfortable fit CoolMAX - Exhalation Valve (optional) where featured the exhalation valve provides extremely low breathing resistance and prevents heat build-up within the face piece DRäGER X-PLORE 1330V FFP3 MOULDED CONFORMS TO EN 19: A1:2009 FFP3 NR D Preformed respirator with the added benefit of the CoolMAX exhalation valve offering easy breathing, comfort and secure. fitting. Provides protection against fine dust, and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries. APF V Code: Box of DRäGER X-PLORE 1730V FFP3 FOLD FLAT VALVED CONFORMS TO EN 19: :2009 FFP3 NR D Fold Flat respirator with the added benefit of the CoolMAX exhalation valve offering easy breathing, comfort and secure fitting whilst providing protection against fine dust, and solid and liquid particles which are found in construction, manufacturing, agricultural and service industries APF V Code: Box of

13 FFP3 S A quality range of disposable respirators providing protection to the wearer from dusts, mists,solid aerosols, powders and accompanying odours. All prices in this Catalogue exclude VAT Y PROTECTION 6 Available in: Moulded Cup Fold-Flat (individually packed within carton) Flexinet KEEP SAFE FFP3 VALVED CONFORMS TO EN 19:2001 FFP3 NR Protection against very fine toxic dusts, fibres and aqueous mists. Protects against oil mists, welding fumes (not Nitrate gases) and microbiological hazards. For use in pharmaceutical, iron and steel and construction industries. Exhalation valve lessens heat build-up and provides greater comfort. Staple free. Assigned Protection Factor = 20 Code: Pack of KEEP SAFE FFP3 VALVED CONFORMS TO EN 19:2001 FFP3 NR Protection against very fine toxic dusts, fibres and aqueous mists. Protects against oil mists, welding fumes (not Nitrate gases) and microbiological hazards. For use in pharmaceutical, iron and steel and construction industries. Exhalation valve lessens heat build-up and provides greater comfort. Staple free. Assigned Protection Factor = 20 Code: Pack of Flexible netting Gives optimum shape retention, longevity and durability Adjustable straps For improved fit and comfort High performance exhale valve Reduces heat and CO2 build-up and breathing resistance 3D slimline ergonomic design Flows with the contours of the face to give ultimate fit, comfort and protection ECONOMY DISPOSABLE VALVED FFP3 CONFORMS TO EN 19:2001 FFP3 Protection against vinyl fire toxic Dusts, Fibre & Aqueous Mists protects against oil mists welding fumes (not nitrate gases) and microbiological hazards for use in Pharmaceutical iron & steel and construction industries. Exhalation valve lessens heat build up and provides greater comfort. Code: Box of KEEP SAFE FLEXINET 3D FFP3 VALVED DISPOSABLE CONFORMS TO EN 19:2001 FFP3 NR Offers protection against very fine dusts, fumes, water and oil-based mists or aerosols. Suitable for heavy based manufacturing processes, pharmaceutical, steel construction and limited welding. Assigned Protection Factor = 20 Code: Box of FEATURED PRODUCT The Keep Safe Flexinet 3D FFP3 valved disposable respirator Denotes products available to special order 3M FACE FIT TESTING KITS 3M FACE FIT TEST KIT Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters. FT10 FACE FIT TEST KIT (SWEET) Code: Each FT30 FACE FIT TEST KIT (BITTER) Code: Each For further information on 3M Respiratory Protection please visit or call the helpline on (9am-5pm Monday to Friday).

14 3M 000 Series Maintenance-Free Reusable Respirators The 000 Series is a range of ready-to-use, maintenance-free half masks designed for effective and comfortable protection against a combination of many gases, vapours and particulate hazards found throughout industry. Utilising unique filter technology enables a very low-profile design for undisturbed field of vision to make your worklife more comfortable. Features and Benefits: Facepiece Low profile design for better peripheral vision Lightweight, well balanced design Soft, non-allergenic material with textured face seal Built In Filters Four versions available, each offering protection against different hazards throughout industry One piece, maintenance-free construction Exhalation Valve Y PROTECTION Central position for effective removal of heat and moisture build up within facepiece Adjustable Head Cradle and NeckStraps Stable secure fit Easy to fasten neck strap CONVENIENCE S Where the respirator is used for more than one shift, and disposed of within a month, record keeping is not required under CoSHH. The only maintenance, apart from daily visual inspection, is the cleaning of the face seal for hygiene requirements. For advice on current selection of 3M respiratory protective equipment please contact the 3M Health and Safety Help Line on or visit selectrespirator M 000 REUSABLE S 3M CODE DESCRIPTION Organic vapour/ particulate respirator Organic vapour/ particulate respirator Organic vapour/ Inorganic and acid gas particulate respirator PROTECTION A1 A2 P2 P3 A B E1 P3 GASES/VAPOURS PROTECTION LEVEL 10 WEL or 1000ppm (whichever is the lowest) 10 WEL or 5000ppm (whichever is the lowest) 10 WEL or 1000ppm (whichever is the lowest) ORGANIC GASES/ VAPOURS INORGANIC GASES/ VAPOURS CONFORMS TO EN05:2001 PROTECTION AGAINST: ACID GAS AMMONIA PARTICULATES: FFP2: 10 WEL (water and oil based) PARTICULATES: FFP3: 20 WEL (water and oil based) Organic vapour/ 10 WEL or Inorganic, acid 1000ppm gas and ammonia A B E K1 P3 279 particulate (whichever is respirator the lowest) APPLICATIONS General paint spraying/ Adhesive spraying/creosoting/ Solvent spraying/paint stripping/ Boat building/vehicle Manufacturing General paint spraying/adhesive spraying/ Mixing agricultural chemicals/creosoting/ Solvent spraying/paint Stripping/ Boat building/aerospace Manufacturing/ Vehicle Manufacturing Burn stripping for paint removal/ Electro-plating/Grinding/ Polishing/ Finishing cured epoxy resins/ Metal Pickling/Metal etching/acid cleaning Burn stripping for paint removal/ Using ammonia solutions/agrochemicals/ Manufacture and maintenance of refrigeration equipment CODE PRICE EACH

15 All prices in this Catalogue exclude VAT Y PROTECTION 8 1 SCOTT SAFETY VISION 2 FULL FACE CONFORMS TO EN 136 Vision 2 is a fully maintainable, high performance full facemask. Features a unique visor design offering almost unrestricted, optically perfect vision for unrivalled user acceptance. The liquid silicone rubber faceseal design is non-dermatitic and extremely soft, to maximise wearer comfort. Code: Each SAFETY FILTER CARTRIDGES SCOTT SAFETY PRO 2000 FILTER CANISTERS TO FIT SCOTT PROFILE 0 HALF MASK (EXCEPT AND 50507) ANDVISION 2 FULL FACE CONFORMS TO EN 13:2000/A1 AND EN 1387 TYPE AND COLOUR CODE APPLICATION Organic gases and vapours with a boiling point of 65 C or above, solid and liquid A2 P3 particles, radioactive and toxic particles, bacteria and viruses Inorganic gases and vapours, solid B2 P3 and liquid particles, radioactive and toxic particles, bacteria and viruses Organic, inorganic, acid gases and A2 B2 E2 K2 P3 vapours, ammonia, solid and liquid particles, radioactive and toxic particles, bacteria and viruses. P Solid and liquid particles, radioactive and toxic particles, bacteria and viruses SCOTT SAFETY S Scott are world renowned respiratory protection specialists. Their range of half and full face masks ensure wearer comfort, simplicity of use, easy maintenance and cleaning. All Scott respirators conform to the latest national and international standards. FULL FACE SAFETY S PLEASE NOTE: Respirators are supplied without filters which are available separately. CODE EACH TYPE AND COLOUR CODE 2 SCOTT SAFETY PROMASK 2 FULL FACE CONFORMS TO EN 136 User friendly inner mask and high performance speech diaphragm. Moulded in soft comfortable silicone, it gives an excellent field of vision and the filters sweep back each side to give exceptional balance. Accepts all Scott Pro 2 particulate, gas and combined filters to provide respiratory protection in a wide variety of applications. Code: Each SCOTT SAFETY PRO 2 FILTER CARTRIDGES TO FIT SCOTT PROFILE 2, PROFILE 60 AND PROMASK 2 S CONFORMS TO EN 13:2000/A1 AND EN 1387 APPLICATION CODE PACK OF Organic gases and vapours A1 (e.g. solvents) Organic, inorganic, acid A1 B1 E1 K gases and vapours and ammonia. A1 P Organic gases and vapours, solid and liquid particles Long duration, for organic A2 P3 gases and vapours, solid and liquid particles Organic, inorganic and acid A1 B1 E1 P3 gases and vapours, solid and liquid particles Organic, inorganic, acid gases A1 B1 E1 K1 P3 and vapours, ammonia, solid and liquid particles. P Solid and liquid particles

16 HALF MASK SAFETY S 3 SCOTT SAFETY PROFILE 0 HALF MASK CONFORMS TO EN 10 Silicone respirator designed to provide a highly efficient fit. Large diameter valves create low breathing resistance and significantly reduce wearer fatigue. Accepts all Scott Pro2000 particulate, gas and combined filters below 300g in weight to provide respiratory protection in a wide variety of applications. Hygienic storage bag included. Size: S/M, M/L Code: Each SCOTT SAFETY PROFILE 60 HALF MASK CONFORMS TO EN 10 Moulded in silicone offering a soft, comfortable facepiece ergonomically designed to provide a highly efficient fit. Accepts all Scott Pro 2 particulate, gas and combined filters to provide respiratory protection in a wide variety of applications. Hygienic storage bag included. Size: S/M, M/L Code: Each Y PROTECTION PLEASE NOTE: Respirators are supplied without filters which are available separately. 5 5 SCOTT SAFETY PROFILE2 HALF MASK CONFORMS TO EN 10 Combines comfort, protection and low through life costs. Perfectly balanced, user friendly and modern in design, Latex and silicone-free to ensure no allergic skin reaction or irritation. Head harness and neck buckle support the mask comfortably without feeling tightness in the straps. Spark, splash and contaminant guards for filters and exhale valve. Accepts all Scott Pro 2 particulate, gas and combined filters to provide respiratory protection in a wide variety of applications. Hygienic storage bag included. Size: M/L, L Code: Each Denotes products available to special order 9

17 All prices in this Catalogue exclude VAT Y PROTECTION 3M 7500 SERIES PREMIUM REUSABLE S The 3M 7500 Series half mask combines comfort, reliable protection and durability. The half mask meets the European Standard EN 10. Gas and vapour filters meet EN 1387 and particulate filters meet EN 13. Comfort with textured face seal Easy to use features the 3M Bayonet Fitting System Reliable easily maintained over long lifetime 3M 7502/3 HALF MASK CONFORMS TO EN 10 A 3M breakthrough in half mask comfort and fit. Silicone mask supplied without filters. Very pliable face seal for extra comfort and good face fit. Innovative exhalation valve to decrease breathing resistance. Supplied without filters Size: Medium Code: Each Size: Large Code: Each M 6000 SERIES LOW MAINTENANCE REUSABLE S A range of low maintenance half mask and full face respirators. The half masks meet the European Standard EN 10 and the full face masks meet the European Standard EN 136 Class 1. Gas and vapour filters meet EN 1387 and particulate filters meet EN 13. 3M 6000 SERIES HALF MASK CONFORMS TO EN 10 The 3M 6000 half mask combines good protection with economy in use. Low maintenance, as only selected spares are available. Supplied without filters. 6200M Size: Medium Code: Each L Size: Large Code: Each Mask is shown complete with filters which are supplied separately. Mask is shown complete with filters which are supplied separately. 3M 6000 SERIES CLASS 1 FULL FACE MASK CONFORMS TO EN 136 CLASS 1 A Class 1 full face mask with good protection and economy in use. Excellent field of vision. Designed for maximum comfort, cost effectiveness and protection against respiratory hazards plus eye and face protection. Silicone facepiece material. Eye impact protection (medium energy) 6800S Size: Medium Code: Each S Size: Large Code: Each Mask is shown complete with filters which are supplied separately. 50

18 PARTICULATE PROTECTION ONLY 3M FILTER SELECTION Choose your filters The bayonet-style cartridge connection on every 3M Reusable Respirator allows you to select from a range of particulate, gas and vapour or combination filters. Refer to the diagram below for assistance Visit the 3M online Filter Selector at and get an estimated fitter service life at Call the 3M Health & Safety Helpline on for further information 3M FACEPIECE GAS & VAPOUR PROTECTION ONLY PARTICULATE + GAS & VAPOUR PROTECTION Y PROTECTION 3M 2000 SERIES PARTICULATE FILTERS CONFORMS TO EN 13 P2 Particulate Protection M 6000 SERIES GAS AND VAPOUR FILTERS CLASS 1 & 2 CONFORMS TO EN 1387 Check whether any 3M readystacked filters are applicable: P3 Particulate Protection & Class 2 organic, inorganic acid gas & ammonia (ABEK2P3R) P2 Particulate Protection & Nuisance Level Organic Vapour & Acid Gas P3 Particulate Protection P3 Particulate Protection & Nuisance Level Organic Vapour & Acid Gas Lightweight for optimal weight distribution Unique low profile trapezoidal shape gives unobstructed field of vision FILTER FILTER No. in Per TYPE NO. CODE Pack Pack A K AX, P3R Particulate Protection & Low Boiling Point Organic Vapours (AX) The following filters are only for use on a full face mask. FILTER FILTER Pack of TYPE NO. CODE 2 A2 B2 E2 K2 P AXP3 (Single shift use only) If not, choose your Gas & Vapour filter from here A1 B1 E TYPE APPLICATION CODE Pack of 2 P2R P2R Extremely lightweight Low breathing resistance Low profile gives unobstructed field of vision 2125 For use against particulates For use against particulates, nuisance level organic vapours and acid gases For use against P3R particulates For use against P3R particulates, nuisance level organic vapours and acid gases. Denotes products available to special order A1 B1 E1 K A1 and Formaldehyde A GAS & VAPOUR PROTECTION EXPLAINED EN1387, the European standard for gas filters, classifies gases and vapours into the following groups, each of which are designated a standard colour coding. There are coloured bands on 3M 6000 series filters using this coding to denote the nature of the protection that each product provides. A - Organic Vapours (boiling point >65 C). Examples of these include xylene and toulene B - Inorganic Vapours. Examples of these include chlorine and bromine E - Acid gases. Examples of these include sulphuric acid K - Ammonia and its derivatives AX - Organic Vapours (boiling point <65 C). Examples of these include acetone and bromoethane *1 or 2-1 after the letter denotes Class 1-2 after the letter denotes Class 2 Class 2 has higher gas capacity than Class 1 3M 5000 SERIES PARTICULATE FILTERS FOR USE WITH GAS AND VAPOUR FILTERS CONFORMS TO EN 13 Extremely lightweight Low breathing resistance Excellent field of vision FILTER FILTER No. in Per TYPE NO. CODE Pack Pack P1R P2R P3R Use a 3M 501 retainer to clamp the two filters together 3M 501 FILTER RETAINER Code: 2921 Pair

19 POWERED AND SUPPLIED AIR SYSTEMS All prices in this Catalogue exclude VAT Y PROTECTION POWERED OR SUPPLIED AIR SYSTEM? POWERED AIR SYSTEM Incorporates a battery powered motorised fan to draw air through a filter Cannot be used to protect against substances with poor warning properties (taste/smell) Must not be used in conditions that are Immediately Dangerous to Life or Health (IDLH) Suitable for use over long shifts - no increase in breathing resistance Can offer integrated head, eye and face protection SELECTION PROCESS FOR POWERED AIR SYSTEM STAGE 1 1. Select your Starter Kit See pages for Starter Kit options SELECTION PROCESS FOR SUPPLIED AIR SYSTEM STAGE 1 Belt Unit STAGE 2 Belt Unit Coupling STAGE 2 2. Choose a headtop See pages for Headtop options STAGE 3 Hose SUPPLIED AIR SYSTEM Air supplied from a compressor (compressed air must be of breathable bl quality) Can be used to protect against substances with poor warning properties (taste/smell) Must not be used in conditions that are Immediately Dangerous to Life or Health (IDLH) Suitable for use over long shifts - no increase in breathing resistance Can offer integrated head, eye and face protection STAGE Hose Coupling Set Benefits of the 3M Modular Approach 3M have developed a comprehensive approach to worker protection systems based on comfortable-to-wear modules. Each system incorporates easy-to-select modules that can be combined into dozens of system configurations. n All 3M headtops, air delivery units and breathing tubes are compatible with one another. Users can mix and match modules as they move from one environment to another, or from one application to the next. This provides plug-and-play adaptability for the continually evolving demands of your workplace. STAGE 3 3. Choose additional components for specific applications or environments eg: breathing tubes, filters etc See pages for component selection STAGE 5 Breathing Tube STAGE 6 Headtop 52 See page 55 for Supplied Air System components

20 3M VERSAFLO POWERED The 3M Versaflo range simplifies the equipment selection process, increases system versatility and improves user comfort every step of the way. Protection from Particles Easy-to-use, versatile respiratory protection systems for environments with hazardous particles Lighter and Smaller Slim, lightweight, balanced design for outstanding comfort Downward air inlet to enable sitting with unit Intelligent Power The lightweight lithium ion battery quickly charges and has no memory effect Electronic audible and visual alarm in case of low battery and/or low air flow Y PROTECTION Straight forward Care and Maintenance The turbo unit has a smooth surface to facilitate fast wipe downs for easier cleaning Intuitive Design All functional parts are indicated in blue 3M VERSAFLO TR-315 POWERED AIR STARTER KIT CONFORMS TO EN 1291 Starter Kit containg the TR-302E turbo unit, particulate filter, pre-filter, standard belt, high capacity battery, battery charger kit, self-adjusting breathing tube and air flow indicator. Code: Each If you have specific system requirements you can make up your own system with the following components: 3M VERSAFLO FILTERS 3M VERSAFLO TURBO UNIT TR-302E POWERED AIR TURBO UNIT CONFORMS TO EN 1291 The lightweight turbo unit is the key to an easy-to-use, versatile respiratory protective system for environments with hazardous particles. This unit is supplied with an Air Flow Indicator only. Code: Each M VERSAFLO BATTERIES (LITHIUM ION) AND CHARGERS TR-330 STANDARD BATTERY PACK Code: Each TR-332 HIGH CAPACITY BATTERY PACK (LONGER LIFE) Code: Each TR-3UK -STATION BATTERY CHARGER KIT Code: Each TR-31UK SINGLE STATION BATTERY CHARGER KIT Code: Each 11.0 TR-3600 PRE-FILTER Code: Each 9.23 TR-3710E PARTICULATE FILTER (P) CONFORMS TO EN 1291 TH2/TH3 Code: Each TR-3800E P+NUISANCE LEVEL ORGANIC VAPOUR FILTER CONFORMS TO EN 1291 TH2/TH3 Code: Each 23.7 TR-3820E P+HYDROGEN FLUORIDE +NUISANCE LEVEL ACID GAS FILTER CONFORMS TO EN 1291 TH2/TH3 Code: Each M VERSAFLO BREATHING TUBES BT-30 LENGTH ADJUSTING BREATHING TUBE Code: Each BT-0 HEAVY DUTY RUBBER BREATHING TUBE Code: Each Denotes products available to special order 53

21 All prices in this Catalogue exclude VAT Y PROTECTION 5 3M JUPITER POWERED AIR The many advanced features of the 3M Jupiter Turbo Unit take powered air respiratory protection into a new dimension of comfort and flexibility. Easy to maintain and use, it can feed any one of a wide range of different headtops for many hazardous environments. Wide choice of gas, vapour and particle filters for a broad range of applications. 1 3M JUPITER POWERED AIR READY TO USE PACK CONFORMS TO EN 1291 This Starter Kit includes a standard Jupiter powered air turbo including decontamination belt and clip, filter gaskets, air flow indicator and calibration tube as well as a pair of organic vapour and particulate (A2P) filters, pre-filters, length-adjusting breathing tube, 8 hour rechargeable battery (NiMH) and a battery 1 charger. Code: Each If you have specific protection requirements you can make up your own system with the following components: 2 3M JUPITER TURBO POWERED AIR UNIT CONFORMS TO EN Includes Decontamination Belt, Air Flow Indicator and Calibration Tube P Code: Each M JUPITER FILTERS CONFORMS TO EN 1291 TH2/TH3 TYPE APPLICATION CODE PRICE A2 P P2 Organic vapours b.p.>65 C + solid and particulates (dust, fibres, mists, fumes and bacteria) A1 B1 E1 P P2 As above plus inorganic and acid gases and vapours, e.g. chlorine, sulphur dioxide, hydrogen chloride + particulates A2 B1 E1 K1 P P2 As above plus ammonia and derivatives P P2 Solid and liquid particulates (dusts, fibres, mists, fumes and bacteria) P2 Pack of pre-filters for use with filters Pack of Pack of Pack of Pack of Pack of Comfort Mounted on an ergonomic comfort belt for a snug fit that remains comfortable even during long periods of wear Alarm Electronic audible and visual alarm in case of low battery and/or low air flow Filters Range of filter canisters for gases, vapours and particles Filter cover which prevents spark damage and allows shower decontamination Straightforward Care and Maintenance Smooth shape and decontamination belt allows easy cleaning 3M JUPITER BATTERIES AND CHARGERS 3 BATTERY PACK - 8 HOUR P Code: Each BATTERY PACK - HOUR P (Not Illustrated) Code: Each BATTERY PACK - HOUR INTRINSICALLY SAFE WITH POUCH KIT P (Not Illustrated) Code: Each Note: A Jupiter Turbo Unit that has been used in a dust environment without an Intrinsically Safe pouch fitted should never be used for Intrinsically Safe applications. INTELLIGENT BATTERY CHARGER P Code: Each BREATHING TUBES 5 BT-30 LENGTH ADJUSTING BREATHING TUBE Code: Each BT-0 HEAVY DUTY RUBBER BREATHING TUBE (Not Illustrated) Code: Each See pages for head top selection 3 5 Denotes products available to special order

22 3M VERSAFLO SUPPLIED AIR REGULATOR 3M Versaflo V-500 Regulator is an advanced, balanced, supplied air regulator designed to provide safe, comfortable and ergonomic protection. Comfort Allows the wearer to achieve the right air flow for optimum comfort by adjusting the belt regulator control Extremely quiet due to its integrated silencer Airflow Extremely stable air flow and control from 3.5 bar to 8 bar Air tools such as an HVLP spray gun can be connected to the auxiliary port with no variation in headtop airflow Y PROTECTION Modular Can be used with the 3M range of headtops, choice of couplings, hoses and accessories (see below for options) Safety Contains an odour filter and whistle to warn of reducing air pressure Approved to EN 159 Selection process for the 3M Versaflo V-500 Regulator - Follow these stages to create a complete 3M V-500 System STAGE 1 STAGE 2 STAGE 3 STAGE STAGE 5 1. Select your Belt Unit 3M AIRFED BELT UNITS 2. Select your Belt Unit Coupling Set* 3M AIRFED BELT UNIT COUPLINGS 3. Select your Hose 3M AIR HOSES Select your Hose Coupling Sets* 3M AIR HOSE COUPLING SETS 6 5. Select your Breathing Tube 3M BREATHING TUBES M VERSAFLO V-500 SUPPLIED AIR REGULATOR CONFORMS TO EN P Code: Each Denotes products available to special order 2 3M AIRFED BELT UNIT CEJN COUPLING P3 Code: Each M AIRFED BELT UNIT RECTUS COUPLING P3 Code: Each M COMPRESSED AIR SUPPLY TUBE (CAST) P Length: 10m Code: Each M COILED COMPRESSED AIR SUPPLY TUBE (CAST) P Length: 7.5m Code: Each M AIRFED CEJN DOUBLE ACTION COUPLING P3 Code: Each M AIRFED RECTUS DOUBLE ACTION COUPLING P3 Code: Each M BT-30 LENGTH ADJUSTING BREATHING TUBE Code: Each M BT-0 HEAVY DUTY RUBBER BREATHING TUBE Code: Each *PLEASE NOTE: Keep your choice for Stage 2 the same as for Stage. For example, if you select a Rectus Belt Coupling you must also select a Rectus Hose Coupling Set. 55

23 3M VERSAFLO S-SERIES HEADCOVERS AND HOODS All prices in this Catalogue exclude VAT Y PROTECTION 56 3M features a range of headtops giving high levels of respiratory protection with options to also protect eyes, head, face and neck as well as specialised activity such as welding. Integrated Suspension Headcovers Ready to use straight out of the box Suitable for applications that require frequent replacement of the entire headtop assembly Wide faceseal with soft elastic for improved comfort and reduced noise New exhalation panel Available in two adjustable sizes: S/M and M/L Premium Reusable Suspension Hoods Cost-effective choice for some high disposal rate environments just the soiled hood fabric is replaced, while the suspension and air ducting can be reused. Innovative Head Cradle with Adjustable Airflow The external cover lets wearers control the location of the airflow Open valve Closed valve 3M VERSAFLO HEAD COVER S-133 CONFORMS TO EN 1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 3A WITH THE 3M AIRFED BELT UNITS Size: S/M, M/L Colour: White Code: Each M VERSAFLO HOOD S-657 STARTER KIT CONFORMS TO EN1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNIT AIR FILTER UNIT; EN159 3A WITH THE 3M AIRFED BELT UNITS Code: Each M VERSAFLO S-607 REPLACEMENT OVERHOOD Code: Each Meets highest respiratory class TH3 Improved shape Comfortable to wear for long periods Excellent air flow Assigned Protection Factor (APF) When used with TR-300, Jupiter and V APF 0 Improved visibility 3M VERSAFLO HEAD COVER S-33 CONFORMS TO EN 1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 3A WITH THE 3M AIRFED BELT UNITS Size: S/M, M/L Colour: White Code: Each 53.6 S-Series hoods require a breathing tube to connect to 3M Jupiter, 3M Versaflo or air fed systems. 3M VERSAFLO HOOD S-855 STARTER KIT CONFORMS TO EN1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNIT AIR FILTER UNIT; EN159 3A WITH THE 3M AIRFED BELT UNITS Code: Each M VERSAFLO S-805E REPLACEMENT OVERHOOD Code: Each 72.0

24 3M VERSAFLO M-SERIES HEADTOPS The 3M VERSAFLO M-Series features lightweight, compact and well-balanced faceshields and helmets that offer protection from a range of respiratory, impact and splash hazards. For further information on 3M Respiratory Protection please visit or call the helpline on (9am-5pm Monday to Friday). Integrated protection for multiple hazards Provides protection from specific respiratory, head and eye hazards Optional hearing protection (H-31 available separately) Modern, well balanced design Lightweight with excellent balance Fully-adjustable head suspension A deflector allows users to direct the airflow inside the headtop for increased control and comfort Y PROTECTION Straightforward care and maintenance Spare parts and accessories are quick, easy and intuitive to replace Visor design Visor design combines excellent peripheral and downward vision with good optical clarity Lenses provide chemical and scratch resistance M VERSAFLO M-106 HEADTOP CONFORMS TO EN 1291 TH2 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 2B WITH THE 3M AIRFED BELT UNITS Features a general purpose faceseal for dusts, spraying and chemical processing. Assigned Protection Factor = 20 Code: Each M VERSAFLO M-107 HEADTOP CONFORMS TO EN 1291 TH2 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 2B WITH THE 3M AIRFED BELT UNITS Features a flame resistant faceseal for applications with hot particles. Assigned Protection Factor = 20 Code: Each M VERSAFLO M-306 HEADTOP CONFORMS TO EN 1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 3B WITH THE 3M AIRFED BELT UNITS Features a general purpose faceseal for construction, chemical applications and heavy industry. Assigned Protection Factor = 0 Code: Each M VERSAFLO M-307 HEADTOP CONFORMS TO EN 1291 TH3 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 3B WITH THE 3M AIRFED BELT UNITS Features a flame resistant faceseal for applications with hot particles. Assigned Protection Factor = 0 Code: Each M VERSAFLO H-31 HELMET MOUNTED EAR MUFF ASSEMBLY SNR 28 CONFORMS TO EN352 H=35, M=26, L=16 SNR=28 Code: Each ATTENUATION H-31 FREQ (Hz) Mean att. (db) St. deviation APV (8%) M VERSAFLO M-925 MOLTEN METAL VISOR CONFORMS TO EN 166 1:BT:3:9 For use with any Versaflo M Series headtop. Code: Box of M VERSAFLO M-928 PEEL OFF VISOR COVERS Code: Box of See page 55 for Supplied Air System components Denotes products available to special order 57

25 All prices in this Catalogue exclude VAT Y PROTECTION 58 3M WELDING HEADTOPS 3M Welding Headtops, used in conjunction with the TR-300, Jupiter and V-500 Respiratory Systems, provide comfortable protection for welding applications. 3M HT-79 WELDINGHEADTOP CONFORMS TO EN 1291 TH2 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; EN 159 2B WITH THE 3M AIRFED BELT UNITS. APF20 Provides integrated head, eye, welding and respiratory protection. UK-sized aperture (3¼"x ¼" 108 x 82mm). Independent welding and clear-view visors allow grinding and respiratory protection with welding visor up. Integrated head protection. Supplied with polycarbonate visors with medium energy eye impact and molten metal protection (EN 166:B:9). Assigned Protection Factor (APF): when used with TR-300, Jupiter or V-500 APF 20. Code: Each M SPEEDGLAS WELDING HEADTOP CONFORMS TO EN 1291 TH2 WITH THE 3M VERSAFLO TR-300 AND JUPITER TURBO UNITS; APF20 The Speedglas 9000 welding headtop is a face, eye and respiratory protective system for increased comfort and safety in welding. Headtop features shade 5 side windows. Combine with any Speedglas Auto-darkening Filter (see right). Includes headtop and hose. Assigned Protection Factor (APF): when used with TR-300 or Jupiter APF 20. Code: Each 18.0 For further information on 3M Respiratory Protection please visit or call the helpline on (9am-5pm Monday to Friday). 3M ADFLO POWERED AIR PURLFYING HIGH EFFICIENCY SYSTEM WITH 3M SPEEDGLAS WELDING HELMET 9100 FX-AIR, SW SIDEWINDOWS AND AUTO-DARKENING FILTER 9100X, SHADES 5, 8-13, 1/CASE 3M Adflo Powered Air Purifying Respirator (PAPR) for welders. Compact, lightweight system with NiMH battery, high efficiency particulate filter, wide leather belt. The 3M Adflo PAPR has a high efficiency particulate filter that can be stacked onto an optional 3M Adflo Cartridge Filter (not included) for additional protection against OV/SD/CL/HC vapors. Audible and visual alarms signal low airflow and low battery charge. The 3M Speedglas Welding Helmet 9100 FX-Air features: Flip-up assembly for grinding and prep work 8 x.25 clear visor viewing area SideWindows - Shade 5 side filters that increase peripheral vision Ergonomic, adjustable head suspension for increased comfort, helmet stability and weight distribution 3M Speedglas Auto-Darkening Filter 9100X with 2.1 x.2 viewing area Selectable Shades 5, 8-13 and Shade 3 light state; Grinding and Tack modes For use with all Stick, MIG, and TIG welding processes Five-position sensitivity control Adjustable recovery delay Solar panel Meets ANSI Z Storage bag, welding cap and starter kit included. Code: Each SPEEDGLAS 9002 AUTO- DARKENING WELDING FILTERS The 9002 range offers a choice of three autodarkening filters with variable shades, normal or large viewing areas plus sensitivity and delay adjustments. Constant protection from ultraviolet and infrared radiation. Consistent auto-switching from clear to dark and back again in just the way the welder wants. Eliminates neck strain of shield flipping while greatly increasing the accuracy of electrode placement. 1 Code: Speedglas 9002X Variable shades 9-13 Each Code: Speedglas 9002D Dual shades 9/11 Each Denotes products available to special order. 1

26 SCOTT SAFETY PROFLOW POWERED S The Scott Proflow is presented as a complete and ready to go boxed system: Electronically maintained level airflow throughout usage Continuous display of battery and filter status No user calibration or servicing necessary 3 year/1800 hr blower warranty Automatic data-logging to in-board microprocessor. Complete performance and service details can be downloaded. This provides an invaluable record of the protection provided and can be referred to in the event of litigation. Proflow provides extremely low through-life costs for efficient cost of ownership and peace of mind. SCOTT SAFETY PHANTOM VISION ADVANCED POWER ASSISTED CONFORMS TO EN1291 CLASS TH2 Utilises the widely acclaimed vision face mask providing the best possible all round field of vision. The blower motor is contained within the mask and all new electronics to ensure ultimate durability and reliability. The waist mounted battery pack ensures user comfort. Simplified maintenance and intuitive re-assembly between uses. Assigned Protection Factor = 0 Size: S, M, M-L Code: Each SCOTT SAFETY PROFLOW PROMASK FULL FACE CONFORMS TO EN136 CLASS Multi-function full face respirator provides unrivalled comfort and protection against a wide spectrum of respiratory hazards in major industrial applications. Can be used in conjunction with the Proflow SC Powered Respirator System or simply on its own with a full range of Pro2000 Filter cartridges as a negative pressure full face respirator. For Particulate: Assigned Protection Factor = 0. For Gas: Assigned Protection Factor = 20 Code: Each Y PROTECTION 1 SCOTT SAFETY PROFLOW SC PROMASK READY-PAK CONFORMS TO EN1292 CLASS TM READY TO GO pack, an easy way to get started based on the Proflow SC Promask Full Face Respirator. High protection against contaminants, e.g. asbestos. Pack includes blower unit, battery, re-charger, hose, Promask headtop and two Pro2000 PF10 P3 Filter Canisters. Assigned Protection Factor = 0 Code: Each Denotes products available to special order. 1 SCOTT SAFETY PRO 2000 FILTER CANISTERS TO FIT PROFLOW S CONFORMS TO EN 1291 AND EN 1292 TYPE AND COLOUR CODE APPLICATION CODE Organic gases and vapours with a A2 P3 boiling point of 65 C or above, solid and liquid particles, radioactive and toxic particles, bacteria and viruses Inorganic gases and vapours, solid B2 P3 and liquid particles, radioactive and toxic particles, bacteria and viruses Organic, inorganic, acid gases and A2 B2 E2 K2 P3 vapours, ammonia, solid and liquid particles, radioactive and toxic particles, bacteria and viruses. P Solid and liquid particles, radioactive and toxic particles, bacteria and viruses EACH

27 All prices in this Catalogue exclude VAT Y PROTECTION 60 SCOTT SAFETY TORNADO Y SYSTEM TORNADO THE POWERED AIR Y SYSTEM Tornado is the most flexible respiratory system available on the market. With a choice of interchangeable headtops, the modular Tornado system increases productivity through minimising user fatigue TORNADO T-POWER UNIT CONFORMS TO EN 1291/2 At the heart of the Tornado system the T-Power incorporates intelligent electronic systems that provide the wearer with real benefits: 15 automatic power levels for optimum airflow. Visual and audible low battery warning. Visual and audible warning of filter clogging. Extended battery and filter life. This lightweight unit is designed to fit neatly around the body. Supplied complete with microprocessor control, belt and flow tester. Code: Each TORNADO SMART CHARGER TOR/BC/SM Takes ultimate care of the battery by reverting to trickle charge on completion. LED lights indicate status. Full charge in 7 hours. Code: Each TORNADO BATTERY PACK TOR/BATT/LITE 8 hour Ultra lightweight, smart NiMh intrinsically safe. For use with smart charger only. Code: Each TORNADO FILTER ADAPTOR TOR/ADAPT For use where more than one filter is required on the T-Power unit. Code: Pack of TORNADO T-POWER FILTERS CONFORMS TO EN 1291/2 TYPE & COLOUR CODE APPLICATION CODE NO. OF ADAPTOR FILTERS EACH REQUIRED TF230 - Organic gases and vapours with a boiling point above 65 C. Inorganic and acid gases A1 B1 E1 PSL and vapours, e.g chlorine, hydrogen sulphide, hydrogen cyanide, sulphur dioxide, hydrogen YES chloride. Plus solid and liquid particulates, (dusts, fibres, mists, fumes, bacteria and virus) TF233 - Organic gases and vapours with a boiling point above 65 C. Inorganic gases and vapours e.g. chlorine and hydrogen sulphide. Acid gases A2 B2 E2 K2 Hg PSL including sulphur dioxide and hydrogen chloride YES Ammonia and organic ammonia derivatives. Mercury. Plus solid and liquid particulates (dusts, fibres, mists, fumes, bacteria & virus) PSL PF251/2 - High efficiency particulate filter NO PF251/SUPER - (Long Life/High Capacity) Solid PSL and liquid particulates (dusts, fibres, mists, fumes, NO bacteria & virus)

28 SCOTT SAFETY HEADTOPS SCOTT SAFETY FH1 HALF HOOD HEADTOP CONFORMS TO EN 1291 TH3, EN 166 1F AND AS/ NZS1716-P Revolutionary soft head cradle for intuitive and straightforward donning. Ultra-clear PETG visor giving wide field of view and a clear down-view panel. Half hood design with skin-friendly neoprene chin seal. Code: Each 5.00 Y PROTECTION SCOTT SAFETY FH2 FULL HOOD HEADTOP CONFORMS TO EN 1291 TH3, EN 166 1F AND AS/ NZS1716-P Revolutionary soft head cradle for intuitive and straightforward donning. Ultra-clear PETG visor giving wide field of view and a clear down-view panel. Full hood design with skin-friendly neoprene chin seal. Code: Each All Scott Safety headtops are supplied without a hose which should be ordered separately 61

29 All prices in this Catalogue exclude VAT Y PROTECTION 62 SCOTT SAFETY FH6 HELMET HEADTOP CONFORMS TO EN 1291 TH3 (PAPR), EN 1835 LDH2 (AIRLINE), EN 397 (HEAD), EN (EAR) AND EN 166 1B9 (EYE & FACE) Integrated helmet and visor with optional ear defenders. Polycarbonate visor. Safety helmet and rail-mounted retractable visor with flexible chin seal. Code: Each SCOTT SAFETY HEADTOPS SCOTT PAPR BREATHING TUBES SCOTT SAFETY CONNECTING HOSE To be used to connect FH1/2 headtop. Code: Each To be used to connect FH6/61 headtop. Code: Each SCOTT SAFETY FH61 HELMET AND WELDING HEADTOP CONFORMS TO EN 1291 TH3 (PAPR), EN 1835 LDH2 (AIRLINE), EN 175 (WELD), EN 397 (HEAD), EN (EAR) AND EN 166 1B9 (EYE & FACE) Integrated helmet, visor and welding shield with optional ear defenders. Electronic variable auto-darkening lens and passive lenses available. Safety helmet and rail-mounted retractable visor with flexible chin seal and outer welding shield. Code: Each All Scott Safety headtops are supplied without a hose which should be ordered separately

30 DRAEGER X-PLORE CONSTRUCTION SET + P3 FILTERS HALF MASK CONFORMS TO EN 10 FILTERS CONFORM TO EN 13:2000/A1 Ideal kit for many construction related activities. Built around the X-plore 3500 half face respirator which is robust, comfortable and suitable for demanding work areas. Features FlexiFit head cradle which can be worn under safety helmets, the body is hypoallergenic, extremely comfortable and silicone free. Includes two P3 Particulate Filters. Code: DRAEGER HALF FACE S DRAEGER X-PLORE PAINTER S SET + A2 P3 FILTERS HALF MASK CONFORMS TO EN 10 FILTERS CONFORM TO EN 1387 Ideal kit for many painting activities. Built around the X-plore 3300 low maintenance, economical half face respirator featuring FlexiFit head cradle which, where necessary, can be worn under a safety helmet. The body is lightweight, extremely comfortable and friendly to the skin. This kit includes two A2 P3 Organic Gas/ Vapour/Particulate filters. Code: DRAEGER X-PLORE CHEMICAL SET + A1B1E1K1HgP3 FILTERS HALF MASK CONFORMS TO EN 10 FILTERS CONFORM TO EN1387 Ideal kit for use in many chemical industry related activities. Built around the X-plore 3300 low maintenance, economical half mask featuring FlexiFit head cradle which, where necessary, can be worn under a safety helmet. The body is lightweight, extremely comfortable and friendly to the skin. This kit includes two A1B1E1K1HgP3 Organic, Inorganic, and Acid gases & vapours, Ammonia, Mercury Vapour and Particulate combination filters. Code: Y PROTECTION DRAEGER FULL FACE DRAEGER SPARE FILTERS TO FIT DRAEGER X-PLORE 3300/3500 HALF MASK AND 5500 FULL FACE CONFORMS TO EN 13:2000/A1 AND/OR EN 1387 TYPE AND COLOUR CODE P3 APPLICATION X-plore bayonet fit Particulate filter. CODE EACH A2 P3 X-plore bayonet fit Organic Gas, Vapour and Particulate combination filter A1 B1 E1 K1 Hg P3 X-plore bayonet fit Organic, Inorganic and Acid Gases and Vapours, Ammonia, Mercury Vapour and Particulate combination filter DRAEGER X-PLORE 5500 FULL FACE CONFORMS TO EN 136 Double layer face seal with triple sealing action ensuring reliable, secure leak-free protection regardless of the wearer s face shape. Swept back low-profile filter positioning provides an unobstructed field of vision. Wide angle distortion free polycarbonate impact proof lens. Easily adjustable head harness for secure and balanced fit. Accepts X-plore bayonet fit filters. Code: