Maintenance Made Simple Fewer replacement parts and super-simple disassembly make cleaning and maintaining the 7000 Series easy.

Transcription

1 Easy to Wear The 7000 Series half mask respirator is specifically designed to comfortably conform to facial contours and with a modern look that increases worker acceptance. The curved neck buckle and adjustable head cradle ensure a comfortable, custom fit for most users and without pressure points. Lightweight and Low Profile Workers will enjoy the all-day comfort that comes from the lightweight 7000 Series masks. The low profile, compact design provides an expansive field of vision and makes the mask well suited to be worn under welding helmets. Drop Down/Lock Down Strap In drop down mode the mask can be conveniently stored around the neck while on the go. Switch the strap to lock down position for quick donning of a mask pre-adjusted for personal comfort SERIES HALF MASK RESPIRATORS Sleek design for modern, high-tech look and increased worker acceptance Lightweight design plus extra-wide sealing area provides all-day comfort Low profile, compact design fits well under welding helmets and with safety glasses Mask drops down for convenient storage around the neck or locks down for custom fit Adjustable head cradle and curved neck buckles for extra comfort Wide field of vision Maintenance made simple with very few replacement parts Available pre-assembled and also as individual components 100% PVC-Free Maintenance Made Simple Fewer replacement parts and super-simple disassembly make cleaning and maintaining the 7000 Series easy. Lock down mode Drop down mode

2 IMPORTANT NOTICE TO USERS You are responsible to understand and follow all warnings, restrictions and other information contained in the instruction manual before you enter a contaminated work area. Failure to do so may result in sickness or death. APPLICATIONS USE AGAINST 1. Contaminants specified on NIOSH approval label, matrix, cartridges or filters and in accordance with all limitations and applicable safety and health regulations, including OSHA. 2. Contaminants with good warning properties, i.e., smell, taste or irritation. DO NOT USE AGAINST 1. Concentrations of contaminants which are unknown, or are immediately dangerous to life or health. 2. Concentrations of contaminants which exceed the maximum use concentration or 10x the OSHA Permissible Exposure Limit, (PEL), whichever is lower, or according to applicable government regulations. 3. Gases or vapors with poor warning properties or those which generate high heats of reaction, or paint sprays containing isocyanates. 4. Sandblasting. 5. Oil-based mists with N filters. WARNINGS TO USER 1. Follow all instructions and warnings on the use of this respirator and wear during all times of exposure. Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death. 2. For proper use, ask your supervisor or call 3. The user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area. A written Respiratory Training Program must be in place and followed by each user before first use. It must meet all requirements of all applicable standards, including OSHA 29 CFR , and in Canada CSA Z 94.4, e.g. training, fit testing, medical evaluation, and applicable OSHA substance specific standards. 4. The vapors, gases, dusts, mists, fumes, and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell. 5. Check with your supervisor for the appropriate cartridges and/or filters for the contaminants in your work area. 6. A qualitative or quantitative fit test must be performed before a respirator is assigned. Refer to current OSHA 29 CFR (f). TECHNICAL SERVICE LINE Moldex maintains a toll-free Technical Service Line to answer questions about the use of Moldex respirators, contaminants and regulations. RESTRICTIONS 1. This respirator does not supply oxygen and must not be used in atmospheres containing less than 19.5% oxygen. 2. Do not remain in contaminated area if any physical distress occurs, for example breathing difficulty, dizziness or nausea. 3. Leave contaminated area and replace respirator and/or cartridge or filter if it is damaged, distorted, a proper fit cannot be obtained, you taste, smell or become irritated by contaminants, or breathing becomes difficult. 4. Do not alter, modify, or abuse this respirator. 5. Store respirator in sealed bag in a clean, dry, non-contaminated area. 6. Dispose of facepiece, and/or cartridges and disks/filters according to your employer s policy and applicable regulations. 7. N, R or P filters are required for particulates. 8. Where oil mists are present, either alone or in combination with solid particulates, do not use the R or P filters for longer than one eight-hour work shift. Dispose no later than eight hours after first use. Do not exceed 10x PEL or a total of 200 mg loading per respirator, whichever is lower. It is the user s responsibility to know the PEL and concentration of the contaminant, the maximum work rate of the employee, and any other work site-specific information to calculate the loading of the filter. Where oil mists are present do not use N filters. 9. Dispose of all cartridges and N filters no later than thirty days after a) first use, and/or b) removing from sealed bag. 10. Use cartridges, filters, and facepieces before the use by expiration date printed on box or bag. PACKAGING Product Code Description Sizes Display Case 7001/2/3 Facepiece S, M, L 1 per Bag 12 Bags per Case 7101/2/3 Organic Vapors S, M, L 1 per Bag 12 Bags per Case Pre-assembled Respirator 7111/2/3 Oil-Free Paint Sptray/ S, M, L 1 per Bag 12 Bags per Case Pesticide Pre-assembled Respirator 7171/2/3 Oil or Water-based S, M, L 1 per Bag 12 Bags per Case Paint Sptray/Pesticide Pre-assembled Respirator 7601/2/3 Multi-Gas/Vapor Smart S, M, L 1 per Bag 12 Bags per Case Cartridges Pre-assembled Respirator 7941/2/3 P100 S, M, L 1 per Bag 12 Bags per Case Pre-assembled Respirator LIMITED WARRANTY IMPORTANT NOTICE TO PURCHASER This limited warranty is made in lieu of the warranties of merchantability, fitness for particular purposes and all other warranties, express or implied. There are no other warranties which extend beyond the description on the face hereof. The physical standards and specifications of Moldex will be met by products sold. Exclusive Remedies: damages for the breach of this limited warranty are limited to the replacement of such quantity of Moldex products proved to be defectively manufactured. Except as provided above, Moldex shall not be liable or responsible for any loss, damage, or liability, direct, indirect, incidental, special, or consequential, arising out of sale, use, or misuse, or the inability to use products by the user.

3 REUSABLE RESPIRATORS EASY TO WEAR

4 COMPLIANCE JUST GOT A WHOLE LOT EASIER Moldex designed the 7000 and 7800 half masks and 9000 full face series to be the most user friendly respirators on the market. These streamlined respirators feature fewer parts, minimal maintenance, and a wider field of vision. They are all ultra-light weight, durable, and economical, so maximum comfort with extended use is built-in. The award-winning 7000/7800/9000 series add up to simple, comfortable, and economical respiratory protection that s just plain EASY TO WEAR PREMIUM SILICONE HALF MASK The 7800 Premium Silicone Half Mask has higher resistance to heat and compression, with all the enhanced comfort and durability of silicone. NEW IN SILICONE 7000, 7800 and 9000 share a full line of cartridges and filters. Full range of gas/vapor cartridges for these common applications and environments: Foundries, paper, pesticides, wood products, printing, pharmaceuticals, agriculture, tobacco, mining, petrochemical, aluminum processing, textiles, glass, chemical manufacturing, paint, laboratories, utilities, cement, fiberglass, coal, fertilizer, petroleum refining, oil or water-based paints, electroplating, embalming, rendering, adhesives, construction, automotive, food processing, agriculture, mining, transportation industries, ship/boat building, health services, furniture manufacturing, primary and fabricated metal.

5 7000/7800 FEATURES Adjustable head harness for a custom fit Wide flange fits more facial shapes comfortably Compact, fits under welding helmets Low profile, angled cartridge placement for wider field of vision Contoured neck buckles for comfort and quick attachment Easy mount bayonet cartridge/filter attachment The versatile 7000/7800 has optional drop down/lock down strap modes Attached exhale cover for easy inspection 7000/ in Drop Down Mode Lock down mode Drop down mode Common applications and environments for 7940 P100 filter and 7990 P100 cartridge: For contaminants where an OSHA substance specific standard applies (asbestos, lead, cadmium, inorganic arsenic, MDA) requiring a High Efficiency Particulate Air (HEPA) filter as well as pharmaceutical, battery, nuclear, welding, metal processing. Also for use in environments where oil-based particulates are present.

6 9000 FEATURES Lightest weight facepiece of any popular model. Weighs less than 13 oz. Over-molded buckles for secure strap attachment. One finger strap release Stand away head harness for easy donning Completely free of metal parts Lens with scratch resistant coating meets ANSI Z87+ for impact protection. Tear away lens protector included Over-molded flange to lens. Eliminates heavy metal clamping frame for less weight and fewer parts Panoramic lens with peripheral vision side panels Integrated exhale area with attached cover. Fewer parts, simple maintenance and inspection Easy mount bayonet cartridge/filter attachment Common applications and environments for N95 and R95: Welding, grinding, machining, bagging, buffing, cement, metal working, dusty environments, foundry, mining, poultry, sanding, wood, furniture, textiles, waste processing. Always refer to instructions before using.

7 7000, 7800 AND 9000 FACEPIECES, CARTRIDGES, FILTERS & ACCESSORIES 7000, 7800 and 9000 Gas/Vapor and Particulate Cartridges 7100 Organic Vapors 7200 Acid Gases 7300 Organic Vapors/Acid Gases 7400 Ammonia/Methylamine 7500 Formaldehyde 7600 Multi-Gas/Vapor Smart Cartridgeridge 7990 P100 Particulates , 7800 and 9000 Particulate Filters Use 8910 N95 or 8970 R95 Pre-Filter with the 7020 Pre-Filter Retainer with any Gas/Vapor Cartridge. Use the 7940 P100 Filter Disk or 7950 P100 Filter Disk plus Nuisance OV/AG, or the 7960 P100 Filter Disk plus Nuisance OV as stand alone filters. Use the 7940 with the 7920 Piggyback Adapter with any Gas/Vapor Cartridge. Use the 7999 Splash and Spark Disk Cover for filter protection P100 Filter Disk 7999 Splash and Spark Protector Cover 7950 P100 + Nuisance OV/AG Filter Disk 8910 N95 Filter 7000, 7800 and 9000 Combo Stacked Cartridge/Filters 7960 P100 + Nuisance OV Filter Disk 8970 R95 Filter Pre-assembled Cartridge + Adapter + Filter for easy attachment. Optional replacement of either cartridge or filter, as needed, for optimum usage and cost savings Organic Vapor Cartridge/P Multi-Gas/Vapor Smart Cartridge/P , 7800 and 9000 Retainers and Accessories Product Display Case Code Description Quantity Quantity 7000 Series Half Mask Facepiece Half Mask, Small 1/Bag 12 Bags Half Mask, Medium 1/Bag 12 Bags Half Mask, Large 1/Bag 12 Bags 7800 Series Premium Silicone Half Mask Facepiece Silicone Half Mask, Small 1/Bag 12 Bags Silicone Half Mask, Medium 1/Bag 12 Bags Silicone Half Mask, Large 1/Bag 12 Bags 9000 Full Facepiece Full Facepiece, Small 1/Box 2 Boxes Full Facepiece, Medium 1/Box 2 Boxes Full Facepiece, Large 1/Box 2 Boxes Gas/Vapor Cartridges 7100 Organic Vapor Cartridges 1 Pair/Bag 30 Bags 7200 Acid Gas Cartridges 1 Pair/Bag 30 Bags 7300 Organic Vapor/Acid Gas Cartridges 1 Pair/Bag 30 Bags 7400 Ammonia/Methylamine Cartridges 1 Pair/Bag 30 Bags 7500 Formaldehyde Cartridges 1 Pair/Bag 30 Bags 7600 Multi-Gas/Vapor Smart Cartridges 1 Pair/Bag 30 Bags Particulate Filters and Retainers * 8910 N95 Particulate Filter 5 Pair/Bag 10 Bags * 8970 R95 Particulate Filter 5 Pair/Bag 10 Bags 7940 P100 Filter Disk 1 Pair/Bag 30 Bags 7950 P100 Filter Disk with Nuisance OV/AG 1 Pair/Bag 30 Bags 7960 P100 Filter Disk with Nuisance OV 1 Pair/Bag 30 Bags 7999 Splash and Spark Protector Cover 1 Pair/Bag 30 Bags 7020 Pre-Filter Retainer 1 Pair/Bag 50 Bags 7920 Piggyback Adapter 1 Pair/Bag 30 Bags 7990 P100 Cartridge Filters 1 Pair/Bag 30 Bags Combo Stacked Cartridge/Filters 7140 Organic Vapor/P100 Combo Cartridge/Filter 1 Pair/Bag 30 Bags 7640 Multi-Gas/Vapor Smart Cartridge/P100 1 Pair/Bag 30 Bags Combination Cartridge/Filter Accessories and Replacement Parts Head Strap Assembly 1/Bag 20 Bags 0073 Diaphragms (7000/7800/9000) 20 Inhale 5 Exhale 1 Kit 0074 Gaskets (7000/7800/9000) 20/Bag 1 Bag Head Harness 1/Bag 5 Bags Faceshield Protector 15/Bag 1 Bag M/L Nose Cup 1/Box 5 Boxes S Nose Cup 1/Box 5 Boxes Series Spectacle Kit 1/Box 1 Box 7006 Probed Cartridge Kit (7000/7800/9000) 1/Kit 1 Kit 7020 Pre-Filter Retainer 7920 Piggyback Adapter 0098 Spectacle Kit *8910 N95 and 8970 R95 pre-filters can be used with 7000, 7800, 8000 and 9000 series respirators.

8 7000/7800/9000 REUSABLE RESPIRATORS FITTING INSTRUCTIONS AND SELECTION GUIDE 7000/7800 HALF MASKS AND 9000 FULL FACE MASK FITTING INSTRUCTIONS STANDARD LOCK DOWN MODE CARTRIDGES & FILTERS DROP DOWN MODE 7100 Organic Vapor Cartridge 7200 Acid Gas Cartridge Chlorine/Hydrogen Chloride/Sulfur Dioxide/or Chlorine Dioxide/or Hydrogen Flouride/or Hydrogen Sulfide. To lock the straps in position, open the valve cover by pulling up on the latch. Position straps underneath the tabs of the strap channel. Close and snap shut the valve cover. Open valve cover by pulling up on the latch. Pull the straps out from underneath the tabs of the strap channel. Close and snap shut the valve cover. Grab lower lengths of head harness with each hand, just above each adjustment buckle, and while positioning chin in flange, pull harness over the head Organic Vapor/ Acid Gas Cartridge Organic Vapors/Chlorine/Hydrogen Chloride/Sulfur Dioxide/Or Chlorine Dioxide/Or Hydrogen Fluoride/ Or Hydrogen Sulfide Ammonia/ Methylamine Cartridge First adjust head cradle then place respirator under the chin and pull the cradle to the top of the head so it rests on the crown. Attach the bottom straps directly against the back of your neck. Push facepiece onto face and chin with one hand and position for most comfortable and secure seal while pulling and tightening neck tab of harness with other hand. Repeat for other neck tab. For easiest, most secure and best fit, always adjust neck harness tabs first before tightening top harness tabs Formaldehyde Cartridge 7600 Multi-Gas/Vapor Smart Cartridge Attach the bottom straps directly against the back of the neck. Adjust head cradle then pull the cradle to the top of the head so it rests on the crown. PERFORM BOTH NEGATIVE AND POSITIVE SEAL CHECKS EACH TIME BEFORE ENTERING A CONTAMINATED AREA. Organic Vapors/Ammonia/Methylamine/ Chlorine/Hydrogen Chloride/Sulfur Dioxide/Or Chlorine Dioxide/ Or Hydrogen Fluoride/ Or Formaldehyde/Or Hydrogen Sulfide P100 Filter Cartridge Tighten top straps first then the lower neck straps until you have a very snug and leak-free fit. Facepiece should not be loose or slide up or down the nose. Tighten by pulling on ends or loosen by pushing out on buckle tab. Do not overtighten. Further tighten top straps if necessary. Tighten top straps first then the lower neck straps until you have a very snug and leak-free fit. Facepiece should not be loose or slide up or down the nose. Tighten by pulling on ends or loosen by pushing out on buckle tab. Do not overtighten. Further tighten top straps if necessary. Negative Pressure Seal Check: Cover both cartridges without pressing too hard against face, then gently inhale and hold your breath. The facepiece should slightly collapse. If air leakage is detected, re-adjust the position of the facepiece and the tension of head harness and repeat the seal check until leakage is eliminated P100 Filter Disk P100 plus Nuisance P100 plus Nuisance OV/AG Filter Disk OV Filter Disk PERFORM A NEGATIVE OR POSITIVE SEAL CHECK EACH TIME BEFORE ENTERING A CONTAMINATED AREA N95 Pre-Filter Negative Pressure Seal Check: Cover both cartridges without pressing too hard against face, and gently inhale and hold your breath. The facepiece should slightly collapse. If air leakage is detected, re-adjust the position of the facepiece and the tension of both headstraps and repeat the seal check until leakage is eliminated. Positive Pressure Seal Check: Cover the exhalation valve vent without pressing too hard against face, and exhale gently to create a slight positive pressure. If air leakage is detected, re-adjust the position of the facepiece and the tension of both headstraps and repeat the seal check until leakage is eliminated. Positive Pressure Seal Check: Cover the exhalation valve vent without pressing too hard against face, then exhale gently to create a slight positive pressure. If air leakage is detected, re-adjust the position of the facepiece and the tension of head harness and repeat the seal check until leakage is eliminated Organic Vapor Cartridge/ P100 Cartridge Disk 8970 R95 Pre-Filter 7640 Multi-Gas/Vapor Smart Cartridge/ P100 Cartridge Disk 7000/7800/9000 ACCESSORIES AND REPLACEMENT PARTS 7020 Pre-Filter Retainer 7920 Piggyback Adapter 7999 Splash/Spark Protector 7000 Replacement Parts: 0072 Head Harness Assembly 0073 Diaphragm Kit 0074 Gasket Kit 7001/7801/9001 Facepiece, Small 7002/7802/9002 Facepiece, Medium 7003/7803/9003 Facepiece, Large WARNING: Before using these respirators, you must read manual for complete instructions. If you cannot obtain a proper fit, do not enter the contaminated area and see your supervisor. Follow all instruction and warnings on the use of this respirator and wear at all times of exposure. Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Replacement Parts: 0073 Diaphragm Kit 0074 Gasket Kit 0092 Head Harness 0093 Face Shield Protectors 0094 Med./Large Nose Cup Assembly 0095 Small Nose Cup Assembly 0098 Spectacle Kit