: ASP50D Adhesive Side Powder, Dark

Transcription

1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name Product code : Substance : ASP50D Adhesive Side Powder, Dark : ASP50D 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture 1.3. Details of the supplier of the safety data sheet : Latent fingerprint powder SIRCHIE Finger Print Laboratories 100 Hunter Place Youngsville, NC USA T ; F ; Emergency telephone number Emergency number : SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (GHS-US) Not classified 2.2. Label elements GHS-US labeling No labeling applicable 2.3. Other hazards 2.4. Unknown acute toxicity (GHS-US) Not applicable SECTION 3: Composition/information on ingredients 3.1. Substance Name : ASP50D Adhesive Side Powder, Dark Name Product identifier % Classification (GHS-US) iron(ii,iii)oxide (CAS No) Not classified Full text of H-phrases: see section Mixture Not applicable SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. : Not expected to present a significant hazard under anticipated conditions of normal use. 12/08/2015 EN (English US) Page 1

2 4.3. Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture Reactivity Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials 7.3. Specific end use(s) : On land, sweep or shovel into suitable containers. Minimize generation of dust. Store away from other materials. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. : Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use. : Strong bases. Strong acids. SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Sources of ignition. Direct sunlight. ASP50D Adhesive Side Powder, Dark ACGIH ACGIH TWA (mg/m³) 10 mg/m³ OSHA OSHA PEL (TWA) (mg/m³) 15 mg/m³ ACGIH Not applicable OSHA OSHA PEL (TWA) (mg/m³) 15 mg/m³ 12/08/2015 EN (English US) 2/6

3 8.2. Exposure controls Personal protective equipment : Dust formation: dust mask. Gloves. Safety glasses. Hand protection Eye protection Respiratory protection : Wear protective gloves. : Chemical goggles or safety glasses. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Appearance Color Odor Odor threshold ph Melting point Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) Explosion limits Explosive properties Oxidizing properties Vapor pressure Relative density Relative vapor density at 20 C Solubility Log Pow Log Kow Auto-ignition temperature Decomposition temperature Viscosity Viscosity, kinematic Viscosity, dynamic 9.2. SECTION 10: Stability and reactivity Reactivity No data available Chemical stability Stable under normal conditions Possibility of hazardous reactions Not established Conditions to avoid Direct sunlight. Extremely high or low temperatures. : Solid : Powders. : Black : odorless : Insoluble in water. Water: Solubility in water of component(s) of the mixture : : 12/08/2015 EN (English US) 3/6

4 10.5. Incompatible materials Strong acids. Strong bases Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity LD50 oral rat Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms > mg/kg (Rat) Based on available data, the classification criteria are not met Based on available data, the classification criteria are not met : Based on available data, the classification criteria are not met. SECTION 12: Ecological information Toxicity LC50 fish Persistence and degradability ASP50D Adhesive Side Powder, Dark Persistence and degradability Persistence and degradability Bioaccumulative potential ASP50D Adhesive Side Powder, Dark Bioaccumulative potential Bioaccumulative potential > 1000 mg/l (48 h; Leuciscus idus) Not established. Biodegradability in water: no data available. Adsorbs into the soil. Not established. No bioaccumulation data available Mobility in soil Other adverse effects Effect on the global warming : No known ecological damage caused by this product. : Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. 12/08/2015 EN (English US) 4/6

5 Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated for transport Additional information : No supplementary information available. ADR Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations International regulations CANADA EU-Regulations Classification according to Regulation (EC) No. 1272/2008 [CLP] Not classified Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] Not classified National regulations US State regulations SECTION 16: Indication of changes : Revision - See : *. Data sources Training advice : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. : Normal use of this product shall imply use in accordance with the instructions on the packaging. : None. NFPA health hazard NFPA fire hazard NFPA reactivity : 1 - Exposure could cause irritation but only minor residual injury even if no treatment is given. : 2 - Must be moderately heated or exposed to relatively high temperature before ignition can occur. : 1 - Normally stable, but can become unstable at elevated temperatures and pressures or may react with water with some release of energy, but not violently. 12/08/2015 EN (English US) 5/6

6 HMIS III Rating Health Flammability Physical Personal Protection : 1 Slight Hazard - Irritation or minor reversible injury possible : 2 Moderate Hazard - Materials which must be moderately heated or exposed to high ambient temperatures before ignition will occur. Includes liquids having a flash point at or above 100 F but below 200 F. (Classes II & IIIA) : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high temperatures and pressures. Materials may react non-violently with water or undergo hazardous polymerization in the absence of inhibitors. : E E - Safety glasses, Gloves, Dust respirator SDS US (GHS HazCom 2012) The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. 12/08/2015 EN (English US) 6/6