MATERIAL SAFETY DATA SHEET

Transcription

1 Date Prepared: 15 October PRODUCT IDENTIFICATION: Product Name: UN Product Class: Manufacturer: Address: Telephone: Fax Venus Spray On ne Allocated Sheep Blow fly treatment Jaychem Industries Ltd. 3 Kordel Place, East Tamaki, Auckland COMPOSITION/ INFORMATION ON INGREDIENTS: Cyromazine 01 Percent: 60 g/l CAS Acetic Acid 02 Percent: <5 CAS Other non hazardous components 03 Percent: Up to 100 Page 1 of 5

2 3. HAZARDS IDENTIFICATION: Hazard Classification: Priority identifiers Secondary identifiers Risk and Safety Phrases WHO Hazard Class III n Dangerous Goods WARNING KEEP OUT OF REACH OF CHILDREN R22:Harmful if swallowed 4. FIRST AID MEASURES: For advice contact the National Poisons Centre on 0800 POISON ( ) or a doctor immediately. Observe good work practices to avoid skin and eye contact and wash hands and exposed skin before meals and after use. Eyes If splashed in eyes wash out immediately with water Ingestion If swallowed seek medical attention. Do NOT induce vomiting Skin If skin or hair contact occurs remove contaminated clothing and flush skin and hair with running water. Inhalation Remove to fresh air 5. FIRE FIGHTING MEASURES: Flash Point: Lower Explosive Limit: Upper Explosive Limit: Extinguishing Media: Unusual Fire and Explosive Hazards: Use media suitable for surrounding materials. Do not allow water to enter drains. n flammable, non combustible and non explosive Page 2 of 5

3 6. ACCIDENTAL RELEASE MEASURES: Emergency Procedures Wear suitable protective clothing. Restrict access to contaminated area. Contain the spill and prevent further dispersion. Retrieve intact containers from site. Place damage containers into containment devices. Absorb spills with inert material and place in waste containers. Wash the area with water and absorb with further inert material. Collect spilled material and place in sealable containers for subsequent disposal. Avoid contamination of water courses or sewers. 7. HANDLING AND STORAGE : Suitable Container Storage Site Requirements Packaging as recommended by manufacturer. Check that containers are clearly labelled. Keep out of reach of children. Store below 30 o C in original container tightly closed Approved Handlers t required. Precautions for safe handling Apply with well-maintained and calibrated equipment. Handle with care. 8. EXPOSURE CONTROL/ PERSOL PROTECTION: Eye Body/Hands/Feet Exposure standards outside the workplace Engineering controls Contact lenses pose a special hazard; soft lenses may absorb irritants and all lenses concentrate them. Wear appropriate clothing and gloves NO TEL is set for this substance at this time. EEL- t applicable t applicable Page 3 of 5

4 9. PHYSICAL DESCRIPTION/PROPERTIES: Appearance Pink suspension ph Specific gravity STABILITY AND REACTIVITY: Stability of substance Conditions to Avoid Material to Avoid Hazardous Decomposition Products Hazardous Polymerisation Specific data Stable under normal conditions of use and storage ne specific materials to avoid hazardous products are expected, except when heated to decomposition Components are not expected to form hazardous components 11. TOXICOLOGICAL INFORMATION: Data Summary This product is unlikely to present a hazard during normal use. Low toxicity 12. ENVIRONMENTAL INFORMATION: Potential Environmental Interactions Environmental Risk and Safety Phrase t Applicable t applicable 13. DISPOSAL CONSIDERATIONS: Disposal Preferably dispose of by use. Otherwise dispose of product and packaging at an approved landfill or other approved facility. Do not use container for any other purpose. 14. TRANSPORT INFORMATION: Relevant Information Page 4 of 5

5 15. REGULATORY INFORMATION: Regulatory Status Registered pursuant to the ACVM Act 1997,.A OTHER INFORMATION: As of the date of preparation of this document, the foregoing information is believed to be accurate and is provided in good faith. However, no warranty or representation with respect to such information is intended or given. Page 5 of 5