: LACQUER SPRAY CLEAR HIGH GLOSS

Transcription

1 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Commercial Product Name : Product code : MSDS-Identcode : Product Use Description : Paints Company : Wurth NewZealand Ltd 42 Hobill Ave Manukau City 2104 New Zealand Telephone : Telefax : Responsible/issuing person : prodsafe.wurth@sap.com Emergency telephone number : Telephone number of company in case of emergency HAZARDS IDENTIFICATION DANGEROUS GOODS. HAZARDOUS SUBSTANCE. Dangerous goods classification according to the Australia Dangerous Goods Code. Classified as hazardous according to the criteria of NOHSC. R-phrase(s) Extremely flammable. Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. S-phrase(s) Keep container in a well-ventilated place. Do not breathe spray. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. This material and its container must be disposed of in a safe way. Use only in well-ventilated areas. 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components 1 / 14

2 Chemical Name CAS-No. Concentration acetone >= 25 - < 35% butane >= 15 - < 20% propane >= 10 - < 12.5% n-butyl acetate >= 7 - < 10% cellulose nitrate, containing a >= 5 - < 7% maximum of 12,6 % nitrogen xylene >= 3 - < 5% 2-methoxy-1-methylethyl acetate >= 3 - < 5% ethanol >= 2 - < 3% 4-methylpentan-2-one >= 2 - < 3% butyl glycollate >= < 2% 4. FIRST AID MEASURES General advice If inhaled In case of skin contact In case of eye contact If swallowed : If you feel unwell, seek medical advice (show the label where possible). First aider needs to protect himself. Move out of dangerous area. Never give anything by mouth to an unconscious person. Take off contaminated clothing and shoes immediately. : If breathed in, move person into fresh air. In the case of inhalation of aerosol/mist consult a physician if necessary. Keep patient warm and at rest. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. : In case of contact, immediately flush skin with soap and plenty of water. Do NOT use solvents or thinners. If skin irritation persists, call a physician. : Protect unharmed eye. If easy to do, remove contact lens, if worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. : If swallowed, seek medical advice immediately and show this container or label. If swallowed, DO NOT induce vomiting. If a person vomits when lying on his back, place him in the recovery position. 2 / 14

3 5. FIREFIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media Specific hazards during firefighting Special protective equipment for firefighters : Carbon dioxide (CO2) Dry powder Water spray jet Alcohol-resistant foam : High volume water jet : Do not use a solid water stream as it may scatter and spread fire. Exposure to decomposition products may be a hazard to health. : In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. : Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. In the event of fire and/or explosion do not breathe fumes. Use water spray to cool unopened containers. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. If the temperature rises there is danger of the vessels bursting due to the high vapor pressure. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Methods for cleaning up : Use personal protective equipment. Avoid contact with skin and eyes. Ensure adequate ventilation, especially in confined areas. Immediately evacuate personnel to safe areas. Avoid inhalation of vapour or mist. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. : Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. : Contain and collect spillage with non-combustible absorbent 3 / 14

4 material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations. Keep in suitable, closed containers for disposal. Clean contaminated surface thoroughly. Do not flush with water. 7. HANDLING AND STORAGE Handling Advice on safe handling Advice on protection against fire and explosion Dust explosion class : Limit the stocks at work place. Use only in well-ventilated areas. Do not breathe vapours or spray mist. Avoid contact with skin and eyes. Do not spray on a naked flame or any incandescent material. Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour concentration higher than the occupational exposure limits. Take precautionary measures against static discharges. : Normal measures for preventive fire protection. Vapours may form explosive mixtures with air. Keep away from heat and sources of ignition. Do not smoke. No sparking tools should be used. Electrical equipment should be protected to the appropriate standard. : not applicable Storage Requirements for storage areas and containers on storage conditions : Store in original container. BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and wellventilated place. Please observe the storage instructions for aerosols! : AS/NZS 3833 The storage and handling of mixed classes of Dangerous Goods in packages and intermediate bulk containers. 4 / 14

5 Advice on common storage Materials to avoid Other data : Keep away from oxidising agents and strongly acid or alkaline materials. Do not store together with oxidizing and self-igniting products. Keep away from food, drink and animal feedingstuffs. : Bases, Acids, Oxidizing agents : No decomposition if stored and applied as directed. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value Control parameters acetone WES- 500 ppm TWA 1,185 mg/m3 Update Basis : bio: Exposure can also be estimated by biological monitoring WES- STEL 1,000 ppm 2,375 mg/m3 : bio: Exposure can also be estimated by biological monitoring butane WES- TWA 800 ppm 1,900 mg/m3 n-butyl acetate WES- TWA 150 ppm 713 mg/m3 WES- STEL 200 ppm 950 mg/m3 xylene WES- TWA 50 ppm 217 mg/m NZ OEL ethanol WES- TWA 1,000 ppm 1,880 mg/m3 5 / 14

6 4- methylpentan-2-one : See Appendix 6 for exposure limits set by other organisations WES- TWA 50 ppm 205 mg/m3 : See Appendix 6 for exposure limits set by other organisations WES- STEL 75 ppm 307 mg/m3 : See Appendix 6 for exposure limits set by other organisations butan-1-ol WES- Ceiling 50 ppm 150 mg/m NZ OEL : Skin: Skin absorption Biological occupational exposure limits Substance name CAS-No. Control parameters Sampling time Update acetone Acetone: 50 mg/l xylene Methylhippuric acid: 1.5 g/l methylpentan-2-one MIBK: 2 mg/l Engineering measures Provide sufficient air exchange and/or exhaust in work rooms. Personal protective equipment Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Product contains low-boiling liquids. Respiratory protective equipment must be air supplied respirators. 6 / 14

7 Hand protection : Nitrile rubber : Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Eye protection Skin and body protection Hygiene measures : Tightly fitting safety goggles : Flame retardant antistatic protective clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. : Handle in accordance with good industrial hygiene and safety practice. General industrial hygiene practice. Do not inhale aerosol. Avoid contact with skin, eyes and clothing. When using do not eat, drink or smoke. Wash hands before breaks and at the end of workday. Follow the skin protection plan. Wash contaminated clothing before re-use. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Colour Odour Odour Threshold : aerosol : in accordance with the product description : characteristic Safety data Flash point Ignition temperature : 365 C Lower explosion limit Upper explosion limit : 1 %(V) : 13.0 %(V) 7 / 14

8 Flammability Autoignition temperature ph Melting point/range Boiling point/boiling range : not auto-flammable : not applicable Vapour pressure : 3,600 hpa at 20 C Density Water solubility Partition coefficient: n- octanol/water Solubility in other solvents Viscosity, dynamic Viscosity, kinematic Relative vapour density Evaporation rate Thermal decomposition : 1 g/cm3 : partly miscible 10. STABILITY AND REACTIVITY Conditions to avoid : Heat, flames and sparks. Materials to avoid : Bases Acids Oxidizing agents Hazardous decomposition products Hazardous reactions : Vapours may form explosive mixtures with air. If the temperature rises there is danger of the vessels bursting due to the high vapor pressure. Stability : No decomposition if stored and applied as directed. 8 / 14

9 11. TOXICOLOGICAL INFORMATION Acute toxicity Acute oral toxicity : Acute toxicity estimate: 5, mg/kg Method: Calculation method Acute inhalation toxicity (Components) n-butyl acetate : LD50: 14,112 mg/l Exposure time: 24 h Species: rabbit xylene 4-methylpentan-2-one : Acute toxicity estimate: 11 mg/l Exposure time: 4,500 h Method: Expert judgement : LC50: 40 mg/l Exposure time: 4 h Species: rat Acute dermal toxicity (Components) xylene : Acute toxicity estimate: 1,100 mg/kg Method: Expert judgement 4-methylpentan-2-one Skin corrosion/irritation Skin irritation Skin irritation (Components) acetone n-butyl acetate xylene 4-methylpentan-2-one : LD50: 16,001 mg/kg Species: rabbit : Result: Repeated exposure may cause skin dryness or cracking. : Result: Repeated exposure may cause skin dryness or cracking. : Result: Severe skin irritation : Result: Mild skin irritation Classification: Irritating to skin. Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin resulting in desiccation of the skin. 9 / 14

10 butan-1-ol : Result: Severe skin irritation Serious eye damage/eye irritation Eye irritation Eye irritation (Components) acetone 4-methylpentan-2-one butan-1-ol : Result: Irritation to eyes, reversing after 7 to 21 days. : Result: Eye irritation Classification: Irritating to eyes. : Result: Risk of serious damage to eyes. Respiratory or skin sensitization Sensitisation Chronic toxicity Mutagenicity Carcinogenicity Teratogenicity Reproductive toxicity Specific target organ toxicity - single exposure no data available Specific target organ toxicity - single exposure(components) acetone : May cause drowsiness or dizziness. n-butyl acetate butan-1-ol : May cause drowsiness or dizziness. : May cause respiratory irritation. May cause drowsiness or dizziness. Specific target organ toxicity - repeated exposure no data available Aspiration toxicity : Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting. 10 / 14

11 Vapours may cause drowsiness and dizziness. 12. ECOLOGICAL INFORMATION Toxicity to fish (Components) n-butyl acetate : LC50: 18 mg/l Exposure time: 96 h Species: Pimephales promelas (fathead minnow) 4-methylpentan-2-one : LC50: mg/l Exposure time: 96 h Species: Pimephales promelas (fathead minnow) Toxicity to daphnia and other aquatic invertebrates (Components) n-butyl acetate : EC50: 44 mg/l Exposure time: 48 h Species: Daphnia 4-methylpentan-2-one : EC50: 170 mg/l Exposure time: 48 h Species: Daphnia magna (Water flea) Toxicity to algae (Components) n-butyl acetate : ErC50: 648 mg/l Exposure time: 72 h Species: Desmodesmus subspicatus (green algae) Elimination information (persistence and degradability) Bioaccumulation Biodegradability Mobility in soil on ecology Adsorbed organic bound halogens (AOX) Results of PBT assessment Additional ecological information : not included : The product should not be allowed to enter drains, water courses or the soil. 11 / 14

12 13. DISPOSAL CONSIDERATIONS Product Disposal of contaminated packaging : In accordance with local and national regulations., This material and its container must be disposed of in a safe way. : Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not burn, or use a cutting torch on, the empty drum. Please ensure aerosol cans are sprayed completely empty (including propellant) Containers that have not been emptied in compliance with regulations are regarded as hazardous waste. Dispose of as unused product. 14. TRANSPORT INFORMATION NZS UN number : 1950 Proper shipping name : AEROSOLS Class : 2.1 Labels : 2.1 Hazchem Code : 2YE Environmentally hazardous : no IATA UN number : 1950 Proper shipping name : Aerosols, flammable Class : 2.1 Labels : 2.1 Packing instruction (cargo : 203 aircraft) Packing instruction (passenger : 203 aircraft) Packing instruction (passenger : Y203 aircraft) Environmentally hazardous : no 12 / 14

13 IMDG UN number : 1950 Description of the goods : AEROSOLS Class : 2.1 Packing group : -- Labels : 2.1 EmSNumber 1 : F-D EmS Number 2 : S-U Marine pollutant : no 15. REGULATORY INFORMATION Labelling according to EC Directives 1999/45/EC R-phrase(s) : R12 Extremely flammable. R36 Irritating to eyes. R66 Repeated exposure may cause skin dryness or cracking. R67 Vapours may cause drowsiness and dizziness. S-phrase(s) : S 9 Keep container in a well-ventilated place. S23 Do not breathe spray. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S35 This material and its container must be disposed of in a safe way. S51 Use only in well-ventilated areas. Special labelling of certain mixtures : Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50 C. Keep away from sources of ignition - No smoking. Keep out of the reach of children. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Notification status : : not hazardous 13 / 14

14 For detailed advice on Personal Protective equipment, refer to the following Australian Standards :- HB 9 (Handbook 9) Manual of industrial personal protection. AS/NZS 1337 Eye protectors for industrial applications. AS/NZS 1715 Selection, use and maintenance of respiratory protective devices. AS/NZS 1716 Respiratory protective devices. AS/NZS : Occupational protective gloves - Selection, use and maintenance. AS/NZS 2919: Industrial clothing. 16. OTHER INFORMATION Full text of R-phrases referred to under sections 2 and 3 R12 Extremely flammable. R36 Irritating to eyes. R66 Repeated exposure may cause skin dryness or cracking. R67 Vapours may cause drowsiness and dizziness. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. End of Safety Data Sheet 14 / 14