Safety Data Sheet. according to Regulation (EC) No 1907/2006. KaVo Everest ZS-Blanks, ZS-Ronden

Transcription

1 Page 1 of 6 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product code: Further trade names Everest ZS-Blanks und Ronden 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture The product is intended for professional use Details of the supplier of the safety data sheet Company name: Kaltenbach & Voigt GmbH Street: Bismarckring 39 Place: D Biberach Telephone: +49 (0) Telefax:+ 49 (0) sdb@kavo.com Internet: 1.4. Emergency telephone number: SECTION 2: Hazards identification 2.1. Classification of the substance or mixture (0) (24 h) Regulation (EC) No. 1272/2008 This mixture is not classified as hazardous according to Regulation (EC) No. 1272/ Label elements Regulation (EC) No. 1272/ Other hazards SECTION 3: Composition/information on ingredients 3.2. Mixtures Chemical characterization Contains: zirconium dioxide Aluminium oxide SECTION 4: First aid measures 4.1. Description of first aid measures After inhalation Provide fresh air. Call a doctor if you feel unwell. After contact with skin Wash with plenty of water. Take off contaminated clothing and wash it before reuse. In case of skin irritation, consult a physician.

2 Page 2 of 6 After contact with eyes Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist. After ingestion Rinse mouth immediately and drink plenty of water. Call a doctor if you feel unwell Most important symptoms and effects, both acute and delayed 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Co-ordinate fire-fighting measures to the fire surroundings. Water Special hazards arising from the substance or mixture Non-flammable Advice for firefighters Wear a self-contained breathing apparatus and chemical protective clothing. Full protection suit. Additional information Use water spray jet to protect personnel and to cool endangered containers. Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Avoid generation of dust. Do not breathe dust Environmental precautions Do not allow to enter into surface water or drains Methods and material for containment and cleaning up Take up mechanically. Treat the recovered material as prescribed in the section on waste disposal Reference to other sections Safe handling: see section 7 Personal protection equipment: see section 8 Disposal: see section 13 SECTION 7: Handling and storage 7.1. Precautions for safe handling Advice on safe handling Avoid generation of dust. Provide adequate ventilation. Avoid contact with skin and eyes. Do not breathe gas/fumes/vapour/spray. Advice on protection against fire and explosion No special fire protection measures are necessary Conditions for safe storage, including any incompatibilities Requirements for storage rooms and vessels Keep container tightly closed in a cool, well-ventilated place. Advice on storage compatibility No special measures are necessary.

3 Page 3 of Specific end use(s) The product is intended for professional use. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Additional advice on limit values none 8.2. Exposure controls Protective and hygiene measures Do not breathe dust. Avoid contact with skin. Keep away from food, drink and animal feedingstuffs. Eye/face protection Wear eye/face protection. Hand protection When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Skin protection Wear suitable protective clothing. Respiratory protection dust formation: Use appropriate respiratory protection. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state: Colour: Odour: ph-value: Changes in the physical state Melting point: Initial boiling point and boiling range: Flash point: Flammability Solid: Gas: Lower explosion limits: Upper explosion limits: Auto-ignition temperature Solid: Gas: Decomposition temperature: Oxidizing properties Not oxidizing. solid white odourless Test method

4 Page 4 of 6 Vapour pressure: Density: Bulk density: Water solubility: Solubility in other solvents Partition coefficient: Viscosity / dynamic: Vapour density: Evaporation rate: 9.2. Other information Odour threshold: 3 g/cm³ SECTION 10: Stability and reactivity Reactivity No hazardous reaction when handled and stored according to provisions Chemical stability The product is stable under storage at normal ambient temperatures Possibility of hazardous reactions No known hazardous reactions Conditions to avoid none Incompatible materials Hazardous decomposition products No known hazardous decomposition products. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Irritation and corrosivity The inhalation of dust/mist or aerosols causes irritation of the respiratory tract. Causes eye irritation. Sensitising effects STOT-single exposure Severe effects after repeated or prolonged exposure Carcinogenic/mutagenic/toxic effects for reproduction Aspiration hazard

5 Page 5 of 6 Additional information on tests This mixture is classified as not hazardous according to regulation (EC) 1272/2008 [CLP]. SECTION 12: Ecological information Toxicity The product is not: Ecotoxic Persistence and degradability Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects Further information Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Advice on disposal Do not allow to enter into surface water or drains. Dispose of waste according to applicable legislation. Contaminated packaging Wash with plenty of water. Completely emptied packages can be recycled. SECTION 14: Transport information Land transport (ADR/RID) UN number: UN proper shipping name: Transport hazard class(es): Packing group: Inland waterways transport (ADN) UN number: UN proper shipping name: Transport hazard class(es): Packing group: Marine transport (IMDG) UN number: UN proper shipping name: Transport hazard class(es): Packing group: Air transport (ICAO) UN number: UN proper shipping name:

6 Page 6 of Transport hazard class(es): Packing group: Environmental hazards ENVIRONMENTALLY HAZARDOUS: Special precautions for user Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code SECTION 15: Regulatory information no Safety, health and environmental regulations/legislation specific for the substance or mixture National regulatory information Water contaminating class (D): Chemical safety assessment 1 - slightly water contaminating Chemical safety assessments for substances in this mixture were not carried out. SECTION 16: Other information Abbreviations and acronyms ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road ) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonized System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service LC50: Lethal concentration, 50% LD50: Lethal dose, 50% Further Information The above information describes exclusively the safety requirements of the product and is based on our present-day knowledge. The information is intended to give you advice about the safe handling of the product named in this safety data sheet, for storage, processing, transport and disposal. The information cannot be transferred to other products. In the case of mixing the product with other products or in the case of processing, the information on this safety data sheet is not necessarily valid for the new made-up material.