BIG TBS-LBIP MANUAL Lifeboat Inspection Platform
|
|
|
- Vanessa Wheeler
- 5 years ago
- Views:
Transcription
1 BIG TBS-LBIP MANUAL Lifeboat Inspection Platform Guide for using LBIP and R7 to carry out lifeboat simulation test Use R7 to carry out MSC.1/Circ.120 periodic inspection and annual inspection Use LBIP and R7 to carry out 5-year load test MSC.1/Circ.1392 one-time follow-up overhaul examination Operating personnel must have lifeboat inspection license and full understand R7 and LBIP operation. Please refer to R7 manual for detailed instruction. All the lifeboat release and retrieval steps must comply with the standard regulation of drilling and inspection.
2 Background & Purpose Lifeboat accidents happen continuously and cause severe injuries and casualties. Create a simulation test environment to make the operating personnel to work in an all safe condition. Repeat the test, inspection, drill and inspection. Provide total solution for existing test method which is inappropriate and unsafe. LBIP Feature Provide total solution Carry out on-load and off-load test by simulating inspection and drill in perfect safety condition. Especially for 5-year load test and MSC.1392 one-time follow-up overhaul examination. Enhance the safety feature for drill. Provide simulation test environment for MSC.1392 one-time follow-up overhaul examination. Provide simulation test environment for lifeboat inspection. Provide simulation test environment for drill and training Watch and learn Provide a perfect safety environment for watching and learning. Benefit For lifeboat service company, it provides simulating test condition for inspection, drill, maintenance and training. Make the test time shorter, lower down the expense and cost; also provide detailed report for Administrations. Make the lifeboat service company more competitive by providing new test method. The first travelling dry dock which is able to carry out 5-year load test and MSC.1392 one-time follow-up overhaul examination. Easy to disassemble and reassemble and portable to be anywhere
3 Assemble LBIP foundation & Assemble Lifting beam 1 Carry out on shore a Set LBIP foundation in aft or fore side of ship. (safe working area, do not in the way of loading progress) Settle two endless strips. a (S.E.A.T. can provide) Carry out on shore a b measurement Check the distance between release hooks Settle the electronic scales a and blocks b on the hooks (the electronic scale is optional)
4 Prepare for launching Lower down lifeboat Release the hooks 2 Carry out on parent ship Prepare of launching procedure by standard regulation. Check is fitted. Lower down lifeboat by standard regulation. Carry out on parent ship Remove, release the hooks. (off-load release) Carry out the inspection for davit and winch on board
5 Operate the lifeboat out of the parent ship and reach to the port. Reset the hooks 3 a Settle the lifting beam scale to 0, if fit) a on the crane truck. (return the PORT Operate the lifeboat out of the parent ship and reach to port next to LBIP. Reset the hooks, lower down the lifting beam to connect hooks and blocks. Fit.
6 Lift up from sea Settle lifeboat on LBIP foundation 4 1M Lift up the lifting beam. The lifeboat is out of water. (record the weight by scale, if fit) b a Put the lifeboat on LBIP foundation until the keel reaches to the cushion a, stop and keep the height. Settle and adjust the 2 endless strips b till tight, lower down the lifeboat again till it full sits on the foundation. (endless strips should hold the bottom side of lifeboat)
7 Modify or replace release and retrieval system Assemble the top structure of LBIP Fit R7 and scale on lifting beam 5 Modify or Replace Modify or Replace Modify or replace release and retrieval system to comply with MSC.1392 and latest LSA code, then go on next step. Assemble 4 main columns and fix them. Assemble supports and horizontal beams R7 R7 Lift the lifting beam up by crane. Fit R7 on two end sides of lugs toward next to scale lugs. Lift the lifting beam and connect with the foundation and fix them.
8 Use R7 to lift up lifeboat (simulate to be out of sea water and carry out on-load test) 9 9 reset the hooks R7 Connect R7-Lifter with hook lugs. Lift up lifeboat simultaneously for aft and fore hooks till the R7-Lifter in unit 9. Reset the blocks back to hooks. (the gap between blocks and hooks should be 1 cm. 1CM tight up No more adjustment before finish the inspection.) Tight up 2 endless strips again. Release R7. The lifeboat weight is taken over by hooks and blocks.
9 Use R7 to lift up lifeboat (simulate to be out of sea water and carry out on-load test) 7 turn off after release R7 Check the pressure of cushion and endless strips. (check from the scale, if fit, the load should be loaded by hooks) 1st empty lifeboat test R7 release the pressure R7 Lift up R7 to unit (1 cm between blocks and hooks), turn on the shut-off valve to turn the accumulator on. The weigh is loading by hooks. Release the lifeboat.
10 1st empty lifeboat test Load to 100% load weight.(refer to MSC.1392 appendix 1.1)- 8 reset the hooks R7 turn off turn on turn on Turn off the shut-off valve. Lift up lifeboat and reset the hooks. Release R7. The weight returns to hooks, then turn on the shut-off valve to reset the hydraulic pressure. Put s or water s to 100% load weight.
11 Carry out 100% on-load test % Ton R7 (Get the total weight from scale, if fit.) R7 release the pressure R7 Lift up lifeboat till R7 in unit.(1 cm between blocks and hooks)(the scale weight turns from 100% to 0%, if fit) Turn on the shut-off valve in accumulator.(the scale weight turns from 0% to 100%, if fit) The lifeboat is loaded by blocks. Release the lifeboat hooks.(pull the release handle and check if it is in good condition simultaneously release)
12 Carry out 100% on-load test 10 reset the hooks R7 turn off turn on turn on After release, turn off the shut-off valve in accumulator. Lift up lifeboat and reset hooks. After reset, turn the shut-off valve on to release fully R7 pressure. Repeat the step for 2 to 50 times to inspect the condition of LRRS and make detailed record. R7 R7
13 Disassemble hooks. Check and record the wearing.(refer to MSC.1392 appendix 1.2) R7 and ag and ag disassemble Turn the scale off. Lifeboat is sitting on LBIP foundation. Release hooks and put R7 aside. Disassemble hook assembly to the ground for cleaning, maintaining and recording. Reassemble hooks. Carry out enclosed hook test for 110% load weight Add load to 110% load weight. put 10 %
14 Carry out enclosed hook test for 110% load weight. (refer to MSC.1392 appendix 1.3) reset the hooks R7 turn on Turn the scale on. Re-connect R7 and hooks in aft and fore side. Lift up lifeboat by R7-Lifter for reset hooks, then release R7-lifter after reset. R7 1CM Lift up lifeboat again till R7 in unit. (1 cm between blocks and hooks) (Scale shows 0, if fit) Put blocks back to hooks to reset condition. Disconnect the release cables.
15 Carry out enclosed hook test for 110% load weight. 13 0~10(S) R7 slowly turn on Slowly turn on the check valve to make R7 down. (According requirement of MSC.1392, it should take 10 second for 110% load test in order to look over the condition of hooks.) (Scale turns from 0% to 110%) R7 turn off after release 2~10(Times) After reset, turn the check valve on to release fully R7 pressure. Repeat the step for 2 to 10 times to inspect the condition of LRRS and make detailed record.
16 Carry out the actuation force test of release handle.(refer to MSC.1392 appendix 1.4) remove 10 % R7 Reduce 10% load weight to 100% When R7 lifter is in unit, re-connect the release cables. turn on 24 kg (Scale shows 0) turn on the shut-off valve. (The scale weight turns from 0% to 100%) Put the RH50 on release handle. Pull the release handle and record the actuation force shows on RH50. Check if the hooks released smoothly and simultaneously.
17 Operate lifeboat back to parent ship and carry out brake test for 110% load 15 DAVIT & WINCH maintenance and inspection put 10 % Carry out davit and winch maintenance and inspection. 1. Add 10% load weight to 110%. R7 2. Turn the scale off. Lifeboat is sitting in the foundation. Release the hooks, remove the blocks and reset the hooks. Remove R7. 3. Disassemble top parts of LBIP and foundation beam. 4. Disassemble supports and 4 main column.
18 Operate lifeboat back to parent ship and carry out dynamic brake test for 110% load 1 5. Fully reset hooks. Lower down lifting beam. Lift lifeboat to water. Remove and release hooks. 7. Start lifeboat engine and operate lifeboat back to parent ship. Reset hooks and fit. 110 % 8. Lower down embarkation ladder. All persons go back to ship by rope ladder. 9. The lifeboat is empty. Carry out dynamic brake test for 110% load.
19 Remove s or water s Persons go to lifeboat by embarkation ladder. Remove and release hooks. Operate lifeboat to port. 2. Fully reset hooks. Lower down the lifting beam. Connect blocks and hooks. Fit. 3. Lift lifeboat to LBIP foundation. 4. Remove s or water s. Recover lifeboat back to parent ship. Disassemble LBIP. Finish all 5-year inspection and MSC.1392 one-time follow-up overhaul examination
20 Parts Description R7 R Foundation 5 Lifting beam 8 Cushion mat Anti-impact beam Main column Horizontal beam Block unit 9 Fall Preventer Devices (during lifeboat drill and shifting) 7 Hydraulic lifting module (BIG TBS-R7) Soft endless strips Turn buckle
21 Parts Description Foundation With socket for folk, which is easy to move and assemble. With lugs for fitting soft endless strips. With turn buckles for making the strips in appropriate length. Anti-impact beam With rubber mat as cushion. Protect lifeboat from damage. Is designed for quick assemble and disassemble. Easy for move, lift and assemble.
22 Parts Description Main column With guide plate to make installation the Horizontal column for foundation easy and fast. With eye bolts. Easy to move, lift and assemble. Horizontal beam With guide beam to make installation the lifting beam easy and fast. With lugs. Easy to move, lift and assemble.
23 Parts Description Lifting beam With lugs. Easy to move, lift and assemble. Lugs are fit for all lifeboats under 40 persons ( tons). With quick instruction for understanding the attachment points Block unit With soft strips to absorb shocking load. Preventing lifeboat from damage. Can fit with electronic scales to show the lifeboat weight. With turn buckles to make appropriate length between hooks and lugs. Apply for different type of lifeboats.
Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum
Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire
IMO DEVELOPMENT OF MODEL PROCEDURES FOR EXECUTING SHIPBOARD EMERGENCY MEASURES. Abandon ship drills. Submitted by the Republic of Korea
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON STANDARDS OF TRAINING AND WATCHKEEPING 41st session Agenda item 12 STW 41/12/Rev.1 4 November 2009 ENGLISH ONLY DEVELOPMENT OF MODEL PROCEDURES
MEASURES TO PREVENT ACCIDENTS WITH LIFEBOATS..2 inadvertent operation of on-load release mechanism;
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 020 7735 7611 Fax: 020 7587 3210 IMO E Ref. T4/3.01 MSC.1/Circ.1206/Rev.1 11 June 2009 MEASURES TO PREVENT ACCIDENTS WITH
INSTALLATION AND OPERATING INSTRUCTIONS. T10219-AD Deckboat 40 with AutoDeploy and Wireless Remote Control
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCH T10219-AD Deckboat 40 with AutoDeploy and Wireless Remote Control If you have any questions or difficulty installing this product, we are here to help!
This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
GUIDANCE ON SAFETY DURING ABANDON SHIP DRILLS USING LIFEBOATS
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 020 7735 7611 Fax: 020 7587 3210 IMO E Ref. T4/3.01 MSC/Circ.1136 15 December 2004 GUIDANCE ON SAFETY DURING ABANDON SHIP
GUIDELINES ON SAFETY DURING ABANDON SHIP DRILLS USING LIFEBOATS
E 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: +44 (0)20 7735 7611 Fax: +44 (0)20 7587 3210 MSC.1/Circ.1578 19 June 2017 GUIDELINES ON SAFETY DURING ABANDON SHIP DRILLS USING LIFEBOATS 1 The Maritime
General Information. NTA607HD Lift Assist Adjustments. Tools Required. Work Location. Notations and Conventions U B F D R B F L
Great Plains Manufacturing, Inc. 1 NTA607HD Lift Assist Adjustments Null4: When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives
MoveRoll Conveyor Operating and Maintenance Manual
MoveRoll Conveyor Operating and Maintenance Manual 1. Read this first! This manual contains information for protection of personnel in the roll handling area from possible injury and/or equipment damage.
IMO INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION LADDERS. Proposal for an amendment to SOLAS and associated guidelines
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON SHIP DESIGN AND EQUIPMENT 50th session Agenda item 5 DE 50/WP.8 7 March 2007 Original: ENGLISH INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION
GUIDELINES FOR THE FITTING AND USE OF FALL PREVENTER DEVICES (FPDs)
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 020 7735 7611 Fax: 020 7587 3210 IMO E Ref. T4/3.01 MSC.1/Circ.1327 11 June 2009 GUIDELINES FOR THE FITTING AND USE OF
Lifeboats: Fitting of 'Fall Preventer Devices' to reduce the danger of accidental on-load hook release
MARINE GUIDANCE NOTE MGN 388 (M+F) Lifeboats: Fitting of 'Fall Preventer Devices' to reduce the danger of accidental on-load hook release Notice to all Shipowners; Masters; Deck Officers; Manufacturers
Operation and maintenance manual for Norsafe K4-D & K4-D-FM release hooks.
Operation and maintenance manual for Norsafe K4-D & K4-D-FM release hooks. Norsafe AS, P.O.Box 115, N-4852 Færvik Norway Phone: +47 37 05 85 00 Fax: +47 37 05 85 01 Email: mail@norsafe.com Internet: www.norsafe.com
Charmborough Bells Risk Assessment and Method Statement
Charmborough Bells Risk Assessment & Method Statement Charmborough Bells Risk Assessment and Method Statement Introduction This risk assessment and method statement has been prepared to outline the procedures
Carter Option X Valve connector assembly. Maintenance manual
Carter Option X Valve connector assembly Maintenance manual Table of contents Description Page 1.0 Introduction... 3 1.1 Safety equipment and procedure... 3 1.2 Maintenance safety alerts... 3 2.0 Equipment
MANITOWOC MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - TON CAPACITY BOO RIGGING GUIDE ODEL # HEAVY LIFT BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal
Operation and Maintenance Instructions
Hydratight Limited Bentley Road South Darlaston West Midlands WS10 8LQ United Kingdom Tel: +44 121 50 50 600 Fax: +44 121 50 50 800 E-mail: enquiry@hydratight.com Website: www.hydratight.com TOP COLLAR
OPERATING INSTRUCTIONS. Parts List N. Note: Owner and operator MUST read and understand this operating instructions before use this lift table.
OPERATING INSTRUCTIONS Parts List 770N te: Owner and operator MUST read and understand this operating instructions before use this lift table. Thank you for using this lift table. Your lift table is made
QUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift
INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your
Guidance on safety during abandon ship drills and fire drills on board ships
Only the Danish version is authentic. Guidance no. 5 of 22 November 2002 issued by the Danish Maritime Authority Guidance on safety during abandon ship drills and fire drills on board ships Accidents during
Safety System Installation Guide for ARE Wind Poles
Safety System Installation Guide for ARE Wind Poles V. 1 May 2011 ** Climbing pegs and ladder should be installed before the pole is erected.** A. Install climbing pegs Install climbing pegs (bolt set)
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
HD-21 MKI - Free Fall Lifeboat Davit
HD-21 MKI - Free Fall Lifeboat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0170 Rev. Date: 10.10.2016 Rev. No: 1 Tel: +47 37 05 85 00 Fax: +47 37
C Crane. Installation & Operation Manual. SWL 120kg. The Hansa CRANE ID#: Davit ISO/DIS June 2000 Sling AS Sept 2000
The Hansa C Crane CRANE ID#: Installation & Operation Manual Ideal for the safe and dignified transference of sailors with disabilities from a wharf to the boat. The crane is also suited to many other
BUTTERFLY VALVES Series 800
BUTTERFLY VALVES Series 800 WARNING Before proceeding read ALL instructions and become familiar with the equipment and associated drawings. Follow ALL applicable safety regulations and codes for pressurized
CLIENT NAME: LOCATION: CALM BUOY INSPECTION:
INSPECTOR REVIEWED INSPECTION OF CALM BUOY OVERALL PHOTO REVISION DESCRIPTION: Preliminary / Final Page: 1 TABLE OF CONTENT 1. MANAGEMENT SUMMARY... 3 1.1. SCOPE OF WORK:... 3 1.2. CORRECTIVE ACTIONS...
KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
Installation Operation Maintenance. Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow IOM.
Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow Model: FP 450-80 Installation Operation Maintenance PAGE 1 OF 5 1. Safety First BERMAD believes that the safety of personnel
CAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
RESOLUTION MSC.321(89) (adopted on 20 May 2011) ADOPTION OF AMENDMENTS TO THE REVISED RECOMMENDATION ON TESTING OF LIFE-SAVING APPLIANCES (RESOLUTION
ANNEX 5 RESOLUTION MSC.321(89) MSC 89/25/Add.1 Annex 5, page 1 THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning the functions
Ground Release Shackle
Operator Manual Subhead Advantages: In the process of installing Slide Rail, the shackle connecting the top of posts, panels, and sheeting must be removed manually. This is normally done by climbing on
Boat type: FRSQ 600 A. Revision status
Boat type: FRSQ 600 A Boat design / purpose: Hull material Engine configuration: Propulsion: G.A. drawing no.: Fast rescue boat Aluminium Inboard diesel 144 HP Water Jet 3FA-100041 Revision status Rev.
1. Product Name. 2. Product Code. 3. Colour. 4. Brief Description. 5. Contents. Itinerant Frame. Likely to be as shown
1. Product Name Itinerant Frame 2. Product Code 21542 3. Colour Likely to be as shown 4. Brief Description Height adjustable! The first real portable suspension system available for travelling therapists
SHIP DESIGN AND EQUIPMENT
E MARITIME SAFETY COMMITTEE 92nd session Agenda item 13 MSC 92/INF.7 5 April 2013 ENGLISH ONLY SHIP DESIGN AND EQUIPMENT Sample form for ship-specific plans and procedures for recovery of persons from
BMR 2100XL Operating Instructions Page 1 of 13
BMR 2100XL Operating Instructions Page 1 of 13 Thank you for deciding to purchase a Swisswing BMR 2100XL (Biomechanical Stimulation Device will be referred to in these operating instructions as the BMR).
OPERATING INSTRUCTIONS (Translation) Rope Winch Type , , ,75
OPERATING INSTRUCTIONS (Translation) Rope Winch Type 4202.0,5 4585.0,5 4585.0,75 GB The length of the rope is correct if: 1. User groups Duties Operator Operation, visual inspection Specialist Assembly,
WORK PROGRAMME. Draft amended guidelines for simulated launching of free-fall lifeboats
E MARITIME SAFETY COMMITTEE 97th session Agenda item 19 MSC 97/INF.3 2 August 2016 ENGLISH ONLY WORK PROGRAMME Draft amended guidelines for simulated launching of free-fall lifeboats Submitted by the Marshall
X-03 EMERGENCY TOWING ARRANGEMENTS
Guideline No.: X-03(201510) X-03 EMERGENCY TOWING ARRANGEMENTS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements,
IMCA Safety Flash 10/11 September 2011
IMCA Safety Flash 10/11 September 2011 These flashes summarise key safety matters and incidents, allowing wider dissemination of lessons learnt from them. The information below has been provided in good
Assembly Drawing: W-311B-A01, or as applicable Parts List: W-311B-A01-1, or as applicable Special Tools: , , &
REDQ Regulators Model 411B Barstock Design Powreactor Dome Regulator OPERATION AND MAINTENANCE Contents Scope..............................1 Installation..........................1 General Description....................1
Standard Operating Procedure
Standard Operating Procedure BOOMS Offshore RO-BOOM / Lamor HD boom Equipment description SOP intended for the use and deployment of Lamor HD 1300 and Desmi Ro-clean 1500 offshore boom. The boom reel holds
VALVCHEQ BACKFLOW PREVENTERS FIGURE RP03
Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections FEATURES GENERAL APPLICATION The RP03 provides protection from both backsiphonage and backpressure
MSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns , , , , , )
VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns 3714022, 3714028, 3714034, 3714040, 3714043, 3714046) REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112103 04/09/18 1 SAFETY 1.1 INTRODUCTION
INSTALLATION OPERATION MAINTENANCE
Bermad Electrically Controlled On-Off Deluge Valve Model: 400E-3D INSTALLATION OPERATION MAINTENANCE Application Engineering BERMAD 1. Safety First BERMAD believes that the safety of personnel working
75 Ton SD Shop Press Operating Instructions
75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections
VALVCHEQ Backflow Preventers Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections Features General application The RP03 provides protection from both
Installation instructions for the Yepp Maxi Easyfit
Installation instructions for the Yepp Maxi Easyfit The Yepp Maxi Easyfit is suitable for: - fitting to an Easyfit luggage carrier* (fig 1A) or - fitting in combination with the Yepp Maxi Easyfit carrier
Safety instructions and operating manual
5-Master Safety instructions and operating manual TBF-PyroTec GmbH Lichterfelder Str. 5 A 21502 Geesthacht Tel.: + 49 (0)4152 157 9950 Fax: + 49 (0)4152 157 9951 Flame projector 5-Master Safety instructions
TECHNICAL SPECIFICATION. Boat type: FRSQ 600 A. Engine configuration: Revision status
Boat type: FRSQ 600 A Boat design / purpose: Hull material Engine configuration: Propulsion: G.A. drawing no.: Fast rescue boat Aluminium Outboard Single Outboard 3FP-100039 Revision status Rev. Revision
Operator s Manual. with Maintenance Schedule. Fourth Edition Second Printing Part No
Operator s Manual with Maintenance Schedule Fourth Edition Second Printing Part No. 82297 Operator s Manual Fourth Edition Second Printing Important Read, understand and obey these safety rules and operating
MANUAL OF HANDLING, TRANSPORTATION AND STORAGE OF ELECTRICAL CABLE REELS
MANUAL OF HANDLING, TRANSPORTATION AND STORAGE OF ELECTRICAL CABLE REELS OBJECTIVE Establish conditions for the proper handling, transportation and storage of electric cable reels, in order to keep the
Model No.: SFC-ED Torque Tool Serial No.: SFC Ref No.:
Model No.: SFC-ED Torque Tool Serial No.: SFC Ref No.: CONTENTS 1 Contents Page & Introduction 2 Training Requirements & General Safety 3 SFC ED Tool Models Covered By Manual Noise & Vibration Levels 4
M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
Use this key to determine which sections of this Product Manual apply to your job.
R710 Product Manual Contents Warnings and Important Information 3 Recommended Use 4 Product Information 5 Technical Data 5 Before & During Every Transfer 6 Inspection 6 SoloLift Scale (optional) 6 SoloVest
Specifications Testing & Adjusting Disassembly & Assembly
SB4191E00 Jul. 2005 Specifications Testing & Adjusting Supplement for Quad Lift Mast D20/25/30/32/33S-3 G/GC20/25/30/32P-3 G/GC20/25/30/32E-3 Important Safety Information Most accidents involving product
WHEN YOU RE OUT THERE, WE RE WITH YOU CENTRE INFORMATION AND COURSE DIRECTORY
WHEN YOU RE OUT THERE, WE RE WITH YOU - DESIGN - BUILD - MAINTAIN - TRAIN - CENTRE INFORMATION AND COURSE DIRECTORY www.survivalcraftacademy.com www.survivalcraftacademy.com 2 An Introduction The Survitec
2-1- Shipping Receiving Lifting Location on Site Installation Stages 6
NEUTRAL GROUNDING RESISTORS INSTALLATION, OPERATION & MAINTENANCE MANUAL Contents 1- SAFETY INSTRUCTIONS... 3 1-1- Compliance with Instructions in this Manual. 3 1-2- Guidance Notes Installation.... 3
SETTING THE HANDLE HEIGHT ON THE ROLLATOR
Model No: Maximum User Weight: 10910C (Lightweight) 10928C (Heavy duty) 125kg (20st) (Lightweight) 170kg (27st) (Heavy duty) Height of handles: 780-915mm (30.5-36 ) (Lightweight) 790-930mm (31-36.5 ) (Heavy
Drive Belt Instructions
Drive Belt Safety Do not roll, pry, twist, invert or bend the belt back on itself. Do not zip tie the belt. The acceptable temperature range for your belt drive is -53 C to 85 C. Do not lubricate the belt
Tel: +44 (0)
Personnel Lifting PORTA-DAVIT 120MR lightweight, portable, aluminium alloy davit; adapted with WLL 120kg for personnel lifting application. Available in several configurations with a wide range of optional
Installation and Service Manual
An Actuant Company Installation and Service Manual Heavy Duty Hydraulic Stabilization Legs CONTENTS Part # 3010003129 REV 0D Section Page 1.0 Receiving Instructions 2 2.0 Safety Issues 2 3.0 Hydraulic
S-60-TO : 1 ton tower system INSTRUCTION MANUAL
S-60-TO : 1 ton tower system INSTRUCTION MANUAL LIVE SYSTEMS bvba Mandellaan 282 8800 B-Roeselare Tel: +32(0)51 69 38 14 Mobile : +32 (0) 495 24 24 67 e-mail: ricky@livesystems.be BTW : 0859.636.665 1
Operating and Safety Instructions. Sectional doors
Operating and Safety Instructions Sectional doors Index Index General Information Warnings and Safety Instructions Inspection / Maintenance Attention in case of rope rupture or spring fracture Operation
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are
Welcome. Globestock Ltd.
MADE IN BRITAIN Welcome Globestock Ltd. Established in 1982, Globestock manufacture and supply a wide range of high quality solutions for confined space access, working at height and load arrest. We take
MSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
On the Go Swing System Instruction Manual
On the Go Swing System Instruction Manual WARNING READ ENTIRE MANUAL BEFORE USE. THIS SWING IS NOT A TOY. THIS SWING IS ONLY TO BE USED BY TRAINED PERSONNEL, SUCH AS AN OCCUPATIONAL THERAPIST, PHYSICAL
Gas Cylinder Storage Structures
Gas Cylinder Storage Structures O These Heavy Duty Storage Structures Provide Galvanized Steel Floors Ensuring Cylinders Will Be Stored On A Level, Dry Surface $ 15,976.00 Order No: L62-3117 Custom Designs
SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
GV Standard X-Vent. Setup, Commissioning & Installation Guide
GV Standard X-Vent Setup, Commissioning & Installation Guide Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
Bermad Model:
Bermad Model: 405-02 Manually Operated Hydraulic Valve INSTALLATION OPERATION MAINTENANCE Application Engineering BERMAD 1. Safety First BERMAD believes that the safety of personnel working with and around
OSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
INSTRUCTIONS ON INSTALLATION, OPERATION AND MAINTENANCE FOR KIRLOSKAR MULTI DOOR NON RETURN VALVES
INSTRUCTIONS ON INSTALLATION, OPERATION AND MAINTENANCE FOR KIRLOSKAR MULTI DOOR NON RETURN VALVES KIRLOSKAR BROTHERS LIMITED MANUFACTURING UNIT, KONDHAPURI (PUNE) INDEX 1 Introduction 2 Inspections on
INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
LAD-SAF LAD-SAF VERTICAL SAFETY SYSTEM THE ULTIMATE IN FALL PROTECTION
LAD-SAF VERTICAL SAFETY SYSTEM THE ULTIMATE IN FALL PROTECTION CONTENTS Product Overview 2 Working Safely at Height 2 Features & Benefits 3 Lad-Saf X2 Detachable Cable Traveller 4-5 Typical System Configurations
TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE. 4. TECHNICAL DATA Approvals:
February 11, 2005 Deluge Valves 218 a 1. PRODUCT NAME Viking Model F-1 Deluge Valve 8" - Manufactured since 2002 4" & 6" - Manufactured since 2003 2-1/2" & 3" - Manufactured since 2004 2. MANUFACTURER
Miller DuraHoist Safety Systems
Portable Confined Space System designed for manhole and confined space entry/ retrieval and fall arrest applications. Portable Fall Arrest Post provides three independent swivel tie-off points for fall
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFT LINE CUTTER SL55 PRODUCT CODE No. 980504 INSTRUCTIONS FOR INSTALLATION,
ST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N SOL 051 Rev.1 SOLAS 74 CHAPTER V, REG.23 REQUIREMENTS FOR PILOT TRANSFER ARRANGEMENTS TO: SHIPOWNERS, SHIPS OPERATORS & MANAGERS, FLAG
LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER
LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES... 4 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE. 5 LIFTING AREA
For ANCHOR WINCH Model: T Big Water 45 T sw Salt Water Series Big Water 45
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCHES For ANCHOR WINCH Model: T10110-45 Big Water 45 T10103-45sw Salt Water Series Big Water 45 If you have any questions or difficulty installing this
Safety Flash. IMCA Safety Flash 10/09 July Compact Fluorescent Lights Interfering with Communications Equipment
AB Safety Flash IMCA Safety Flash 10/09 July 2009 These flashes summarise key safety matters and incidents, allowing wider dissemination of lessons learnt from them. The information below has been provided
HYDRAULIC MOBILE LIFTING TABLE
HYDRAULIC MOBILE LIFTING TABLE MODEL NO: HTL300 & HTL500 PART NO: 7610148 & 76210152 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1116 INTRODUCTION Thank you for purchasing this CLARKE
DISPOSITIVI ANTICADUTA FALL PREVENTER DEVICE
MANUALE DISPOSITIVI ANTICADUTA FALL PREVENTER DEVICE 1 1. GENERAL Two lifting cables are needed for each lifeboat; one is fastened to the bow hook the other to the stern hook (pics 1&2). As both hooks
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFTLINE CUTTER SL80 PRODUCT CODE No. 980248 INSTRUCTIONS FOR INSTALLATION,
For ELECTRIC ANCHOR WINCH Models: T Pontoon 35 T sw Salt Water Series Coastal 35
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCHES For ELECTRIC ANCHOR WINCH Models: T10109-35 Pontoon 35 T10102-35sw Salt Water Series Coastal 35 If you have any questions or difficulty installing
INSTRUCTION MANUAL. Eurosul/Sollax-D type Launched Inflatable Liferaft. Eurosul/Sollax D davit-launched inflatable liferaft series specification
INSTRUCTION MANUAL Eurosul/Sollax-D type Launched Inflatable Liferaft Eurosul/Sollax D Davit-launched inflatable liferaft was found to be in accordance with relevant requirements of the regulations of
INSTRUCTION MANUAL Eurosul/sollax-D type Launched Inflatable Liferaft. The liferaft was found to be in accordance with relevant requirements of the
INSTRUCTION MANUAL Eurosul/sollax-D type Launched Inflatable Liferaft The liferaft was found to be in accordance with relevant requirements of the regulations of "1996 Amendments to 1974 SOLAS"and"Rules
AcornVac Vacuum Plumbing Systems - Trouble Shooting Guide
AcornVac Vacuum Plumbing Systems - Trouble Shooting Guide 1. Accumulators Problem Accumulator is overflowing If Accumulator continues to overflow Correction 1. Push and hold the manual activation button
1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
Installation and service should be performed by a qualified service professional.
Damage to your lift or vessel can result from improper initial setup of the system. Consult a HydroHoist Certified Installer for initial setup and support Installation and service should be performed by
Differential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
"FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
Table of Contents Documentation for PIT TROLLEY A4
Table of Contents Documentation for PIT TROLLEY A4 Declaration of conformity 1 Safety instructions and routines to check for safety 2 Description of features and technical data 3 Assembly instructions
Conducting Safer Lifeboats & Davit Inspections and Testing
Conducting Safer Lifeboats & Davit Inspections and Testing As per IMO/MSC/ Circ.1206. Rev 1 In compliance with IMO/MSC/Circ. 1392 owners are reminded that all hooks will be required to be made compliant
User Instruction Manual For Davit Rescue System
Instructions for the following series products: Rescue Davit System Model numbers 8004000 and 8302500 User Instruction Manual For Davit Rescue System This manual should be used as part of an employee training
LOAD CHARTS RT890E METRIC DIN / ISO / 75%
LOAD CHARTS RT89E METRIC DIN / ISO / 75% 232729 SERIAL NUMBER RT89E - S/N 232729 1 RT89E - S/N 232729 2 TABLE OF CONTENTS GENERAL NOTES...4 WEIGHT REDUCTIONS / LINE PULLS & REEVING INFO / RIGGING CHART
S/Y MORSKI ZEKAN TECHNICAL INFORMATION
S/Y MORSKI ZEKAN TECHNICAL INFORMATION Cabins: 3 Toilets: 1 Max. Persons: 8 (6+2) LOA: 11,35 m Beam: 3,80 m Draft: 1,95 m Engine: Volvo 28HP Water tanks: 360 L Fuel tank: 150 L Anchor windlass Speed and