SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

Transcription

1

2 Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method / Task Description Hazard Identification Level Recommended Actions / Controls for Prevention P.P.E Residual. Check layout and crane access for standing & unloading poles. Tripping, pedestrians & traffic Ensure area, in particular, walkways are clear of trip hazards Implement any pedestrian & traffic control. Wear safety foot wear, gloves, helmet & Hi Vis Clothing. 0. Receive poles & lights on site and confirm correct numbers and types. 3. Install cable underground or overhead. Struck by falling objects Falling from heights Use appropriate protective gloves. Check access Keep lifting area clear of people. Barricade work area Implement manual risk control procedures in accordance with SWMS 0 Test and confirm cables before commencing work. Isolate and fit danger tags as appropriate where running near live equipment. Use ladders or work platforms appropriately in accordance with SWMS 09 and SWMS 00. lifting PPE procedures to be used. 9. Check light fitting base or bracket and terminate cabling into fitting. Struck by falling objects. Keep lifting area clear of people. Barricade work area. Check crane or other lifting equipment and operator s qualifications are up to date. Ensure spotter available to prevent pedestrians entering work area & traffic management as required. Pedestrians Unsafe equipment Overhead cables. Use spotter to control unauthorised access Pre op check of equipment Use spotter as required Implement manual risk control procedures in accordance with WMS 0 and Code of Practice for Tasks 00. Check PPE is worn Wear safety foot wear, gloves, helmet & Hi Vis Clothing. 0 9 Version. 0/03/07 Review Date 0/03/08

3 Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37 Page 3 of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method / Task Description Hazard Identification Level Recommended Actions / Controls for Prevention P.P.E. Residual 6. Install pole, ensure it is secure and installed to specifications. Struck by falling objects Falling Use appropriate protective gloves. Barricade work area Complete the fitting of any other parts and wiring to the light poles. Cable connections & testing Use ladders or work platforms appropriately in accordance with SWMS 09 and SWMS 00. Confirm all connected cables are isolated & tagged. Version. 0/03/07 Review Date 0/03/08

4 Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Personnel Qualifications and Experience Required Personnel Duties and Responsibilities Training Required to Complete Work Minimum of Electrical Worker Grade or apprentice working under the effective supervision of a qualified Electrical Worker minimum Grade. Supervisor to carry out daily inspections of work site for hazards. Supervisor to be trained in risk identification, assessment and control e.g. Job Safety Analysis (JSA). Appropriate industry and site induction. Elevated Work Platform training and national certification as required dependent upon equipment to be used. Traffic Management Engineering Details / Certificates / WorkCover Approvals / Australian Standards Installation to be in accordance with AS 3000 Standards and client's specifications. Floor capacity sufficiently engineered to carry weight of elevated work platform/s. Footings and rag bolts correct size for size and weight of poles. Plant / Equipment Required (Mobile or Static) Portable hand tools, electrical power tools, drills, leads and ladders. Hazard Identification to be conducted for plant used e.g. Scissor lift, boom lift, cherry picker. Persons responsible for ensuring compliance with this SWMS All personnel to maintain tidy work area on site at all times. Personal Protective Equipment (PPE) to be worn at all times on site. Barricading to be used as appropriate to protect others from working below elevated work, crane and other plant and equipment. Supervisor to be appropriately trained, qualified and competent in OH&S and electrical practices for the task. On the job skills training to be conducted by Supervisor to personnel. Training on specific elevated work platform to be used if using EWP. Referenced Codes of Practice / Regulations / Legislation Work Health and Safety Act and Regulations 0, Electrical Safety Act 00 and Regulations 03, Electrical Safety Code of Practice 00, Hazardous Tasks Code of Practice 00, Plant Code of Practice 00, Mobile Crane COP 006, Industry Standard for Electrical Installations on Construction Sites 00. Maintenance Checks / Calibration Intervals Hand tools and ladders to be checked daily. Elevated Work Platform/s in accordance with manufacturer s recommendations and log book. Truck crane in accordance with manufacturers recommendations and log book.. Mark McDonald. Austin Wilds P P E Version. 0/03/07 Review Date 0/03/08

5

6