Building 32A Roof Safety Assessment
|
|
|
- Shannon Richards
- 5 years ago
- Views:
Transcription
1 Roof Safety Survey GENERAL INFORMATION Building 32A Roof Safety Assessment CAMPUS: Wollongong Campus BUILDING: Print & Distribution (32A) Building is a two storey metal warehouse structure with steeply pitched metal DESCRIPTION: RISK ASSESSMENT # : roof and polycarbonate skylights on the southern face. UOW01602 ROOF ACCESS: Portable Ladder SIGNAGE: Nil COMPLIANCE PLATES: MARKED SAFE AREA: ROOFING SYSTEM: HEIGHT OF BUILDING: PITCH: ROOF CONSTRUCTION: STRUCTURAL INTEGRITY: VEGETATION: ADJOINING ROOFES: 1) Located on ridge at eastern end of the horizontal lifeline, 2) located on the western end of the horizontal lifeline, 3) Tags on the anchor points. None Sala Sayflgida & Sayf8 Lifeline TYPICAL ANCHORS Two storey < 30 degrees Metal Roof Sound, however southern facing roof also contains transparent polycarbonate roofing which is brittle and unsafe to walk on. Nil Nil SERVICES: Gutters Yes Satellite Dishes Yes A/C Units Yes Antenna Yes Exhaust Fans Yes Skylights Yes Ducts No Glass Skylights No Roof Ventilators Yes Pipework No Fume Cupboards 1 Cooling Tower No Telco Towers No EXISTING SAFETY ITEMS: Horizontal Lifelines Yes Handrail No Anchor Points Yes Walkway No Vertical Lifelines No Parapets No WORK ACTIVITY DETAILS: Clean Gutters / Routine Maintenance Service A/C Plant Fume Cupboard Yes Yes Yes Frequency Every 6 months Every 3 months Every 6 months Note: Before commencing any work obtain Roof Permit from Facilities Management Division
2 Building 32A Roof Safety Assessment Roof Safety Survey RISK ASSESSMENT Risk Assessment / Task Location BUILDING 32A Note: The hazards identified do not include hazards that related to specific work tasks. These should be identified in the Safe Work Method Statement (SWMS) of the contractor. What is the Activity/Service Item Hazard Identification What are the potential Hazards Risk Assessment & Control Measures What is the Risk Level List any Control Measures already Implemented Risk Control Describe what can be done to eliminate risk or reduce the harm Access to Roof via portable ladder Falling M Anchor Points Installed All access points to roof are Access to Roof Unauthorised access M locked and made secure so are not accessable by unauthorised persons; signage Secure ladder to suitable access point - adjacent to installed anchors. Risk Assessment and Roof Safety Survey Access roof. Steep pitch H Gutter Maintenance on Roof and Awnings Falling H Horizontal Lifeline & Anchors Installed Horizontal Lifeline & Anchors Installed Ensure horizontal lifeline & anchors used correctly Ensure horizontal lifeline & anchors used correctly Roof Plant Maintenance greater than 2m from roof edge Refer to SWMS for contractor H Safe Work Procedure Roof Plant Maintenance within 2m from roof edge Falling & Refer to SWMS for contractor H Horizontal Lifeline & Anchors Installed General Trip Hazard - Roof Sheeting M Safe Work Procedure Steep roof pitch - minimum awareness. Ensure horizontal lifeline & anchors used correctly Walkway or minimum awareness in Safe Work Procedure Roof Skylights Falling H General Environmental Hazards - Spiders, Wasps, and other insects M Horizontal Lifeline & Anchors Installed Ensure horizontal lifeline & anchors used correctly Appropriate PPE and insect On-going pest control repellent; Pest control as required measures General Weather Trips/Slips - Wet Roofs H General Weather - Windy Condition H Safe Work Procedure, do not work on wet roof Safe Work Procedure, do not work in high wind conditions General Weather - Hot Conditions M Safe Work Procedure Do not work while roofs are wet or have dew Do not work in windy conditions Use suncream, hats and remain hydrated and take appropriate breaks
3 Building 32A Roof Safety Assessment Reference Documentation Legislation NSW Work Health and Safety Regulation 2011 Part 4.4 Falls Australian Standards AS : Fixed platforms, walkways, stairways and ladders - Design, construction and installation AS : Industrial fall-arrest systems and devices - Harnesses and ancillary equipment AS : Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems AS : Industrial fall-arrest systems and devices - Fall-arrest devices AS : Industrial fall-arrest systems and devices - Selection, use and maintenance AS : Portable ladders - Selection, safe use and care AS : Safety, protective and occupational footwear - Guide to selection, care and use AS : Safety in Laboratories - Fume Cupboards AS : Safety in Laboratories - Recirculating Fume Cabinets AS : Temporary edge protection - General requirements AS : Temporary edge protection - Roof edge protection - Installation and dismantling Code of Practice WorkCover - Safe Work on Roofs. Part 1 - Commercial and industrial buildings UOW Documentation Working at Heights Guidelines Thermal Comfort Guidelines UOW Roof Access Permit UOW Roof Access Certificate Other SALA - Fall Arrest and Height Safety Systems - Fall Protection Manual WorkCover - Safe Working at Heights Guide 2006 WorkCover Safety Guide - Portable Ladders February 1999
4 Building 32A Roof Safety Assessment Campus map Google Image Aerial photograph P - location of compliance plate - location of horizontal lifeline o - location of anchor point
5 Building 32 A Roof Safety Assessment Looking down from Building 32 North western corner showing location of compliance plate and fall restraint system South west aspect Western aspect Northern aspect
6 GUIDE LINE ONLY THIS OPERATION MANUAL SHOULD BE CONSIDERED A GUIDE ONLY. ALL PERSONS USING THE EQUIPMENT LISTED IN THIS MANUAL MUST BE COMPETENTLY TRAINED. THE INSTALLER INSTALLS SYSTEMS ONLY AND DOES NOT MANUFACTURE THE SYSTEMS. END USERS TO ENQUIRE WITH THE MANUFACTURER ( CAPITAL SAFETY GROUP) AT THEIR OWN DISCRETION. ALWAYS FOLLOW MANUFACTURERS INSTRUCTIONS. SAFE USE OF SALA SAYFGLIDA & SAYF8 LIFELINE. 2. ATTACHMENT OF SHUTTLE 1. TYPICAL LIFELINE. 2. SHUTTLE IN CLOSED POSITION. 3. CORRECT ORIENTATION
7 PAGE 2. SAFE USE OF SALA SAYFGLIDA & SAYF8 LIFELINE. 1. TYPICAL LIFELINE. 2. ATTACHMENT OF SHUTTLE 2. SHUTTLE IN CLOSED POSITION. 3. CORRECT ORIENTATION SALA SAYFLINK SHUTTLE part # SS130 - Slide the locking pin / attachment point into the slot on the safelink and open the mouth ( the attachment point must be facing you or the mouth will not open.) - Place the safelink over the cable and close the mouth. - Slide the locking pin back to the original position and lift the locking pin / attachment point. - Connect the hardware from the lanyard or rope grab to the hole in the locking pin / attachment point to prevent the locking pin from falling into the slot and the mouth opening.
8 GUIDE LINE ONLY THIS OPERATION MANUAL SHOULD BE CONSIDERED A GUIDE ONLY. ALL PERSONS USING THE EQUIPMENT LISTED IN THIS MANUAL MUST BE COMPETENTLY TRAINED. THE INSTALLER INSTALLS SYSTEMS ONLY AND DOES NOT MANUFACTURE THE SYSTEMS. END USERS TO ENQUIRE WITH THE MANUFACTURER (BULLIVANTS ) AT THEIR OWN DISCRETION. ALWAYS FOLLOW MANUFACTURERS INSTRUCTIONS. TYPICAL ANCHORS
9
Building 30 Roof Risk Assessment
Roof Safety Survey GENERAL INFORMATION Building 30 Roof Risk Assessment CAMPUS: Wollongong Campus BUILDING: Woolyungah Indigenous Centre / UOW College (30) DESCRIPTION: L shaped 2 storey building with
Building 9 Roof Safety Assessment
Roof Safety Survey GENERAL INFORMATION Building 9 Roof Safety Assessment CAMPUS: Wollongong Campus BUILDING: Sports Hub (9) DESCRIPTION: Two storey metal roof building with no internal roof access and
Building 31A Roof Safety Assessment. UOW01628 Access Hatch from Second Floor Yes
Roof Safety Survey GENERAL INFORMATION Building 31A Roof Safety Assessment CAMPUS: Wollongong Campus BUILDING: Facilities Management Division (31 A) DESCRIPTION: Two storey metal roof building comprising
Building 21 Roof Safety Assessment. Multi Story Building with large metal roof areas Exteral access required for window cleaning UOW01613
Roof Safety Survey GENERAL INFORMATION CAMPUS: Wollongong Campus BUILDING: 21 Early Start Facility DESCRIPTION: RISK ASSESSMENT # ROOF ACCESS: Multi Story Building with large metal roof areas Exteral access
Building 43 Roof Safety Assessment
Roof Safety Survey GENERAL INFORMATION CAMPUS: Wollongong Campus BUILDING: Building 43 Building 43 Roof Safety Assessment DESCRIPTION: RISK ASSESSMENT # : ROOF ACCESS: SIGNAGE: COMPLIANCE PLATES: SAFE
International House Roof Safety Assessment. 3 storey student accomodation units with tile roofs. Nil - Anchor points are not compliant None
Roof Safety Survey GENERAL INFORMATION CAMPUS: Wollongong Residential BUILDING: International House International House Roof Safety Assessment DESCRIPTION: RISK ASSESSMENT # : ROOF ACCESS: SIGNAGE : COMPLIANCE
Building 24 Roof Safety Assessment
Roof Safety Survey GENERAL INFORATION CAPUS: Wollongong Campus BUILDING: Teaching Building (24) DESCRIPTION: odern three storey building with low pitch metal roof. orizontal lifelines located 2 metres
Building 68 Roof Safety Assessment
Roof Safety Survey GENERAL INFORMATION CAMPUS: Wollongong BUILDING: Building 68 Kooloobong Stage 2 DESCRIPTION: Modern E shaped unit accommodation block comprising of three wings. Pitch and level of roof
Building 16 Roof Safety Assessment
Building 16 Roof Safety Assessment Roof Safety Survey GENERAL INFORMATION CAMPUS: Wollongong Campus BUILDING: Library (16) DESCRIPTION: Original flat concrete roof surrounded by handrail and parapet. More
Safety Risk Assessment Roofing Works / Surveying / Inspections
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 One Direct Operatives accessing roof
FATAL AND SEVERE RISK PROGRAM
FATAL AND SEVERE RISK PROGRAM LEADER SESSION FALL FROM HEIGHTS Only do the task if it can be done safely FALL FROM HEIGHTS OUR COMMITMENT LIFE SAVING BEHAVIOUR: I WILL ALWAYS USE ADEQUATE PROTECTION WHERE
Develop and sign off on risk assessment/work method statement for the task, considering task specifics elements that will affect the user s safety:
Safe Use Step 1 Complete your site induction with the RIS Altitude system owner and confirm that the users can demonstrate competence in the activity of working at heights by provision of a nationally
Applying Construction Fall Protection Concepts to General Industry
Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This
SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
FALL PROTECTION WORK PLAN (Alstom Power Installation Canada)
FALL PROTECTION WORK PLAN (Alstom Power Installation Canada) Location: Unit: Foreman: Task: Supervisors Ensure: Workers must review and sign this fall protection work plan prior to starting work in an
1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX
Anchor on the Go. Portable Roof Anchor for Metal Roofs. Part Number Patent Number Installation and Operating Instructions
Anchor on the Go Portable Roof Anchor for Metal Roofs Part Number 762998 Patent Number 2003258383 Installation and Operating Instructions WARNING: This product is part of a fall protection system. Users
At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.
0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate
2018 INSPECTION REPORT
2018 INSPECTION REPORT Compiled For Queensland University of Technology KELVIN GROVE CAMPUS INTRODUCTION Height Dynamics is an innovative height safety company that provides a diverse range of products
FALL PROTECTION LADDERS ACCESSWAYS
FALL PROTECTION LADDERS ACCESSWAYS PORTABLE LADDERS Max. Height 20 Step Ladder For small hand tool use only Must have non-slip feet Top step is not to be stood on Wood ladders not to be painted See COE
HIPPLOCK. User s Safety Manual
HIPPLOCK User s Safety Manual This temporary roof anchor device is intended to be used in compliance with OSHA s subpart M (1926.500) as part of a personal fall protection system under the oversight of
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
CHAPTER 10 FALL PROTECTION
CHAPTER 10 FALL PROTECTION A. INTRODUCTION... 1 B. CHAPTER-SPECIFIC ROLES and RESPONSIBILITIES... 2 C. HAZARD IDENTIFICATION... 3 1. Job Hazard Analysis (Jha).... 3 2. Fall Hazards... 3 D. HAZARD CONTROL...
GARDENS POINT CAMPUS
08 INSPECTION REPORT Compiled For Queensland University of Technology GARDENS POINT CAMPUS INTRODUCTION Height Dynamics is an innovative height safety company that provides a diverse range of products
This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
FALL PROTECTION PROGRAM (OHS-0010)
() For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7
DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
WORKING AT HEIGHTS MANUAL
WORKING AT HEIGHTS MANUAL 1300 301 755 SAYFA.COM.AU 1 ABOUT SAYFA Sayfa Group leads the industry in the design, installation and management of access, fall protection and ground safety systems. The In-Action
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
TRAVSMART permanent single-cable horizontal lifeline system
The Travsmart single-line system provides a smooth travel. It allows the traveler to move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user s hands remain
SAFE WORK METHOD STATEMENT 0005 (Hang-On Platform) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities)
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0005 (Hang-On Platform) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities) Additional Information (if required):
Fall Protection / Open Holes & Guardrail
Fall Protection / Open Holes & Guardrail 1. Leading Edges Policy Statement It is GW Communications policy that any worker exposed to a fall 6 or greater, shall be protected from coming into contact with
LADDERS FIXED AND PORTABLE
CONTRACTOR WHS HAZARD STANDARD LADDERS FIXED AND PORTABLE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
Prevention of Falls and Working at Heights
Workplace Safety Schools Cleaning Prevention of Falls and Working at Heights It is the policy of the Company to avoid working at heights above 2 metres wherever practical. When avoidance is not an option,
Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene
Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature
ROOFING FALL PROTECTION 27.I
ROOFING FALL PROTECTION 27.I Prior to the start of work, a structural analysis of the roof shall be conducted by a Qualified Person to assure that the load capacity of the roof deck will not be exceed.
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET Re-roofing exposes workers to the hazards of demolition work at heights. With the proper fall protection,
2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices.
Title: Elevated Walking/Working Surfaces (Fall Protection) Site Function: Safety Procedure No.: MC032.122 Page: 1 of 16 McIntosh Site Reviewed: 02/2013 Effective: 03/2013 Supersedes: 08/2012 Preparer:
Work At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
SWMS No 007 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS Manual SWMS No 007 Samark North Qld Pty Ltd ABN : 99 082 958 487 Electrical Contractors License C37121 Page 2 of 6 Safe Work Method Statement Title: SWMS:007 WORKING ON ENERGISED
WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST
Windmill Hazard Inspection Checklist WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Authorised by: LOCATION OF INSPECTION...... Inspected By (1)........... (2)..... PRINT PRINT Signature (1):. (2)....
Fall Protection Program
Fall Protection Program 135 College Street, Suite 100, New Haven, CT 06510 Telephone: 203-785-3550 / Fax: 203-785-7588 ehs.yale.edu 6/26/2018 CONTENTS: 1. Introduction... 3 2. Responsibilities... 3 A.
Telco Antennas SWMS Working At Height Above 2m
Telco Antennas SWMS Working At Height Above 2m A SWMS shall be developed for a task where the risk has been assessed as Medium or Higher Division: Date: SWMS No: (e.g. Installation, Engineering Workshop)
FCX Department of Occupational Health and Safety. Flagging and Barricading Guideline
FCX Department of Occupational Health and Safety Flagging and Barricading Guideline Approval Date: 11/12/13 Original Date: 03/30/09 SOP # FCX-19 Revision # 1 Supersedes X High Medium Task Risk Low NA Contents
Company Name: Address: ABN: Company Contact: Position: Phone No.: Date SWMS provided to Principal Contractor: Principal Contractor Signature: Date:
Page 1 of 15 ACTIVITY: Heights - Working at SWMS No.: SAFE WORK METHOD STATEMENT (SWMS) - Part 1 Company Name: Address: ABN: Company Contact: Position: Phone No.: Project Details Project: Job Address:
SECTION FACILITY FALL PROTECTION PART I - GENERAL
SECTION 11 24 29 - FACILITY FALL PROTECTION PART I - GENERAL 1.1 The Illinois Department of Labor (IDOL) regulates fall protection for general industry and construction in the public sector under the Illinois
Overview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used
FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to
Working at Height. A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use.
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: WORKING AT HEIGHT CSBP-GM-11-031-02 Version Number: 24.0.0 Date Revised: 10 September
Safe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Organisation Details : Organisation Name Northern Plumbing Contact ABN 17 15 41 4 Position Director Address 47 Thomas Street Edgeworth 85 Phone Number 0411 10 4 Project
The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America.
Construction & Utilities Division Planning Tools The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America. Guidelines for Creation of
Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1
Fall Protection Refresher Orientation Fall Protection Refresher Orientation 1 Course Objectives! Understand the definitions of fall prevention, fall restraint, and fall arrest.! Understand the requirements
Training Manual RIIWHS204D Work Safely at Heights
Training Manual RIIWHS204D Work Safely at Heights START TIME: 7.45AM SHARP Participants must read this manual prior to attending the training program and are required to bring the manual to the training
Working at Heights Training Checklist (Ontario Version)
Working at Heights Training Checklist (Ontario Version) The new working at heights training is different from the fall protection training required by Sec. 26.2(1) of the Ontario Construction Projects
WORKING AT HEIGHTS CS-PTW-HAZ-02
CS ENERGY PROCEDURE FOR WORKING AT HEIGHTS CS-PTW-HAZ-02 Responsible Officer: Corporate PTW Administrator Responsible Executive: Chief Executive Officer (CEO) DOCUMENT HISTORY Key Changes Prepared By Checked
FALL PROTECTION PLAN FALL PROTECTION PROGRAM
FALL PROTECTION PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific fall protection plans for working at heights. FALL PROTECTION PLAN IMPORTANT: This document
FALL PROTECTION GUIDELINE
FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE
Fall Protection and Elevated Work
Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following
MR-051 ROOF ACCESS PERMIT
Instruction 1 State the job Details. Date: Site Name: Site Supervisor: Number of workers: Work description: Blocks being accessed: Existing weather conditions: Instruction 2 State and verify competency/
FALL PROTECTION CODE OF PRACTICE
FALL PROTECTION CODE OF PRACTICE This guide can help you comply with Section 50.2 of the General Regulation 91-191. NOTE: Not for use when a safety monitor is part of the fall protection system on a work
SWMS No 009 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 4
Samark North Qld Pty Ltd SWMS Manual SWMS No 009 Samark North Qld Pty Ltd ABN : 99 082 98 87 Electrical Contractors License C72 Page 2 of Safe Work Method Statement Title: SWMS:009 Confined Space Work
FALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
Fall Protection ABC s
Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall
Fall Protection PPT-SM-FALLPROT V.A.0.0
Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which
THE ULTIMATE IN MODULAR SYSTEM DESIGN
ROOFSAFE ANCHOR AND CABLE SYSTEM THE ULTIMATE IN MODULAR SYSTEM DESIGN FLEXIBLE COST-EFFECTIVE VERSATILE THE ULTIMATE IN FALL PROTECTION Product BROCHURE ROOFSAFE ANCHOR AND CABLE SYSTEM MEETING THE NEEDS
Harbour Town Gold Coast Site Induction
Harbour Town Gold Coast Site Induction At Harbour Town Gold Coast we believe that safety is integral to the way we do business. We are committed to operating a safe environment for all where we are incident
Safe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Work Activity/Description: Site Name: Date: Site Address: Name Position Signature Document No: Prepared By: OHS Manager Revision: Reviewed By: National Program Manager
Security and confidence at height.
A Security and confidence at height. Vertical Systems DISTRIBUTED BY M DBI-SALA Vertical Systems are designed to complement your ability to work while meeting all applicable OSHA and ANSI standards. Vertical
ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
FALL PREVENTION PROCEDURE
TABLE OF CONTENTS 1. OBJECTIVE... 3 2. SCOPE... 3 3. DEFINITIONS... 3 4. RESPONSIBILITIES... 4 5. HAZARD AND RISK ASSESSMENT... 4 5.1 WORKING AT HEIGHT PERMIT... 4 5.1.1 Permit Currency... 5 5.1.2 Working
FALL PROTECTION
115500 FALL PROTECTION PART 1 GENERAL 1.01 General A. Cornell University seeks to prevent exposures to fall hazards whenever possible and protect personnel that may be exposed to fall hazards. Therefore,
Region: USA Language: EN Number : TB0031 Revision : B. Total Page: 3 Page n : 1 First Issue: 10/2014 Rev. Date: 10/08/2014
Subject Dropped Object Protection Region: USA Language: EN Number : TB0031 Revision : B Total Page: 3 Page n : 1 First Issue: 10/2014 Rev. Date: 10/08/2014 Some users of fall protection equipment require
SWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0002 (Void Platform Stairs) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities & SWMS 0002 Void Platform) Additional
SAFE WORK METHOD STATEMENT Part B
SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS
CPWR - The Center for Construction Research and Training. Fall Hazard Identification and Control Audit of the Aria Building. City Center Project
CPWR - The Center for Construction Research and Training Fall Hazard Identification and Control Audit of the Aria Building City Center Project Las Vegas, Nevada September, 2008 Submitted by Mark Fullen
SAFE WORK METHOD STATEMENT 0003 (Perimeter and Balcony Fallguard) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities)
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0003 (Perimeter and Balcony Fallguard) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities) Additional Information
FALL PROTECTION PLAN INSTRUCTIONS
Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or
Training and Assessment Strategy
TAS Work Safely at Heights RIIWHS204D Training and Assessment Strategy Version 5.00 Introduction This Training and Assessment Strategy (TAS) provides a guide to Trainers/Assessors as to how to deliver
CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition WHS
Tower Climber Orientation.
www.natehome.com Disclaimer: Thank you for supporting the National Association of Tower Erectors (NATE) with your participation in this online orientation course. This program is designed as a resource
Surface exploration drilling
Checklist Surface exploration drilling This checklist is intended to assist employers to identify common hazards and manage risks associated with surface exploration drilling. June 2017 Background In surface
December 2012 Safety Meeting. Fall Protection Answer Key 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT V.A.0.
Fall Protection Answer Key December 2012 Safety Meeting Below is the answer key for the quiz. 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT Fall Protection 1 Introduction to Fall Protection
SOP. Working in Confined Spaces
Purpose This procedure outlines the requirements for the management of entry into confined spaces in all work areas with the intention of minimising risks to health and safety from any potential hazards
Department of Facilities Management. Occupational Health and Safety. Fall Protection Program
Department of Facilities Management Occupational Health and Safety Fall Protection Program October 2016 1 1.0 INTRODUCTION This program has been developed to provide guidance to those managers and supervisors
Work At Height Health & Safety Management Standard Issue 3 (April 2011)
Work At Height Health & Safety Management Standard Issue 3 (April 2011) Introduction This document contains corporate standards and guidance on the management of risks arising from work at height. It is
ROOF ANCHOR TO GO INSTALLATION & OPERATING INSTRUCTIONS. AZ-200 Portable Roof Anchor for Metal Roofs. zero4heightsafety.com
ROOF ANCHOR TO GO AZ-200 Portable Roof Anchor for Metal Roofs INSTALLATION & OPERATING INSTRUCTIONS WARNING: This product is part of a fall protection system. Users must read and follow instructions in
Safe Work Method Statement
Company Name: Safe Work Method Statement Site Address: Other Details: Contractor: Activity/Trade: Electrician Date: TASKS List the tasks required to perform the activity in sequence carried out. Entry
SWMS No 001 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 5
Samark North Qld Pty Ltd SWMS Manual SWMS No 00 Samark North Qld Pty Ltd ABN : 99 082 98 87 Electrical Contractors License C372 Page 2 of Safe Work Method Statement Title: SWMS:00 USING PORTABLE LADDERS
User Instruction Manual
User Instruction Manual Dual Sliding Beam Anchor Model # GF-DSBA-BA01202 Model # GF-DSBA-BA01802 Model # GF-DSBA-BA02402 WWW.GFORCE-SAFETY.COM Tacklestore Ltd Unit R1D Rockingham Gate Cabot Park, Poplar
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content 1910.28 Duty to have Fall Protection and Falling Object Protection 1910.29 Fall Protection Systems and Falling Object Protection Criteria and
FALL PROTECTION PLAN July 2012
FALL PROTECTION PLAN July 2012 Office of Police and Safety (423)323.0255 Introduction In the construction industry in the United States, falls are the leading cause of worker fatalities. Each year, on
J&S Cooper Utilities
Working at Heights Inspection conducted for J&S Cooper Utilities Conducted on 17 Apr 2018 08:35 AM Location 11953 Tyler Rd, Red Bluff, CA 96080, USA Prepared by SafetyCulture Staff Completed on 17 Apr
Safe Working at Heights Theory Assessment
Safe Working at Heights Theory Assessment Version 4.00 Safe Working at Heights Theory Assessment This Theory Assessment will form part of the formal assessment for the following unit/s of competency: RIIWHS204D
??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
MANUFACTURING TECHNICAL INSTRUCTIONS - SAFETY FALL HAZARD CONTROL REQUIREMENTS SERIES & NO. SMI - 157
1 of 6 1.0 PURPOSE To establish minimum requirements and guidelines for controlling hazardous exposure of personnel to falls from working elevations in conformance with Federal and State OSHA rules and
The following items represent the bulk of the exposure to falls on a construction site.
Falls Page 60 Wily Coyote always seems to fall into a deep canyon and not be injured at all. People can t. Then why do we seem to have trouble getting workers to pay attention to the fall hazards around
SAFE WORK METHOD STATEMENT (SWMS) All Trades Abseiling ABN: Ph:
PCBU: ALL TRADES ABSEILING ABN: 42 137 576 035 PO Box 774 NEWPORT NSW 2106 LIC: 123517C P: 0412 227 578 Principal Contractor (PC): Date SWMS provided to PC: Work activity: Workplace location: High risk
RoofSafe. Anchor. Ready to spring into action when you need it most. The innovative NEW RoofSafe Anchor. with
RoofSafe Anchor Ready to spring into action when you need it most The innovative NEW RoofSafe Anchor with Anchor visualisation showing SpiraTech Force Management Technology. Image for illustrative purposes