APOG - AMERICAN PAINT, OIL & GREASE REMOVER

Size: px
Start display at page:

Download "APOG - AMERICAN PAINT, OIL & GREASE REMOVER"

Transcription

1 MATERIAL SAFETY DATA SHEET PRODUCT APOG - AMERICAN PAINT, OIL & GREASE REMOVER NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 2 Moderately combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Spot and stain removal agent for drycleaning only. Synonyms: American POG, APOG SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Aromatic petroleum distillates Cyclohexanol Amyl alcohol Potassium hydroxide (dilute solution) pentyl acetate 1-methoxy-2-propanol Cyclohexanone Petroleum distillates % <5 <5 <5 < CAS # SECTION 3: PHYSICAL DATA OSHA PEL 500 ppm TWA 50 ppm TWA Not listed 2 mg/m3 Ceiling 100 ppm TWA Not listed 50 ppm TWA 500 ppm TWA LD 50 oral: 4700 mg/kg (rat) dermal: 3480 mg/kg (rat) oral: 2060 mg/kg (rat) dermal: 1300 mg/kg (dog) oral: 3880 mg/kg (rat) dermal: 4.49 ml/kg (rat) oral: 273 mg/kg (rat) dermal: 4200 mg/kg (rabbit) oral: 6500 mg/kg (rat) oral: 6070 mg/kg (rat) dermal: 12 ml/kg (rabbit) oral: 1900 mg/kg (rat) dermal: >1 ml.kg (rabbit) oral: >5000 mg/kg (rat) dermal: >3160 mg/kg (rabbit) Appearance: Light yellow liquid Odor: Nut-like Specific Gravity (20 C): ph (20:80 in IPA/H2O Soln.): Boiling Point: 206 F (96.7 C) Solubility in Water: Slight-forms emulsion Vapor Pressure (mm Hg): No data Vapor Density: Heavier than air SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): 104 (TCC) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: No data Lower Flammable Limit: No data Dry chemical, carbon dioxide, water fog or other media for Class B fires. Wear self-contained breathing apparatus. Cool containers with water spray. Vapors may form combustible or explosive mixture with air. Combustible products may be toxic. SECTION 5: REACTIVITY DATA Stability: Stable Conditions to Avoid: Use or storage at temperatures over 120 F. Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers. Burning may produce toxic, irritating vapors. Will not occur. SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Slight Acute: Chronic: Exposure to high concentrations of vapors may cause headaches, nausea, dizziness, or nose, throat or eye irritation. Contact with eyes, prolonged or repeated contact with skin may cause drying or irritation. Orthodichlorobenzene is reported to cause liver and kidney damage with prolonged or repeated exposure. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

2 APOG - American Paint, Oil & Grease Remover EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 50 pm TWA (cyclohexanol, No components are listed by ACGIH, cyclohexanone), 100 ppm TWA (pentyl Slight eye and skin reported IARC or OSHA. acetate) TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Respiratory Protection: Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Local exhaust at work station is recommended. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in closed containers in a well ventilated area. Keep containers closed when not in use. Keep away from heat and open flame. Avoid breathing vapors. Keep from sources of ignition. Soak up on absorbent material (sawdust, etc.) and shovel into containers for disposal. Dispose of in a manner that complies with all local, state and federal regulations for combustible wastes. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Combustible. Keep away from heat and open flames. Use with adequate ventilation. Avoid prolonged breathing of vapors. Avoid contact with skin and eyes. FIRST AID: Remove person overcome by vapors to fresh air. In case of contact with eyes, flush for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Eyes: Skin: Remove person overcome by vapors to fresh air. Flush eyes for 15 minutes with water. Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: September 30, 2008 Replaces MSDS of: February 27, 2007

3 MATERIAL SAFETY DATA SHEET PRODUCT BPR - Blood & Protein Remover NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 1 Slightly combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Stain removal agent for drycleaning and laundry Synonyms: Blood and protein remover SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Ammonium hydroxide (aqua ammonia) Potassium hydroxide (dilute solution) % <1 <2 CAS # OSHA PEL 50 ppm TWA 2 mg/m3 Ceiling LD 50 oral: 350 mg/kg (rat) oral: 273 mg/kg (rat) dermal: 4200 mg/kg (rabbit) SECTION 3: PHYSICAL DATA Appearance: Light yellow liquid Odor: Bland, trace of ammonia Specific Gravity (20 C): ph (Straight): Boiling Point: 212 F Solubility in Water: Miscible Vapor Pressure (mm Hg): No data Vapor Density: Heavier than air SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): >200 (COC) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: No data Lower Flammable Limit: No data Dry chemical, carbon dioxide, foam, water fog. Compatible with all types. Avoid directing strong stream of water into material - may cause foaming. Wear self-contained breathing apparatus when fighting fires in confined areas. Exposure to fire or high temperatures may produce noxious, irritating or toxic fumes. Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: Storage at temperatures above 120 F (48.8 C) Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers Burning produces toxic, irritating fumes Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Low Acute: Chronic: May cause drying or irritation if splashed into eyes or on prolonged or repeated contact with skin. Inhaling vapors may cause temporary discomfort. known Carcinogenicity: Trace component (<0.01%) is listed by ACGIH, IARC and OSHA as suspected carcinogen. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

4 EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT Slight eye and skin reported TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY BPR - Blood & Protein Remover CARCINOGENICITY Trace component listed by ACGIH, IARC and OSHA SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES SPECIAL PROTECTION INFORMATION Respiratory Protection: required when used as directed with adequate ventilation. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: Store in closed containers at temperatures below 120 F. Do not store in aluminum containers. SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Small spills - flush to sewer with water. Large spills - soak up on absorbent material and transfer to containers for disposal as nonhazardous waste. Nonhazardous. Flush to sewer or dispose of material and container in municipal landfill in compliance with all local, state and federal regulation. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Splashing into eyes or prolonged or repeated contact with skin may cause irritation. FIRST AID: In case of contact, flush eyes for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Eyes: Skin: Remove person to fresh air. Flush eyes for 15 minutes with water. Wash off of skin with soap and water. Ingestion: If swallowed, do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: August 25, 2008 Replaces MSDS of: February 27, 2007

5 MATERIAL SAFETY DATA SHEET PRODUCT EASY OUT NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 2 Moderately combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Spot removal & leveling agent for water sensitive drycleanable fabrics. For use in drycleaning only. Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name % CAS # OSHA PEL LD 50 Synthetic isoparaffinic hydrocarbon ppm TWA (recommended) oral: 34.6 g/kg (rat) SECTION 3: PHYSICAL DATA Appearance: Clear, yellow liquid Boiling Point: No data Odor: Bland Solubility in Water: Dispersible Specific Gravity (20 C): Vapor Pressure (mm Hg): No data ph (20:80 in IPA/H 2 O Soln.): Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Upper Flammable Limit: No data Flash Point (Method)( F): 157 (PM) Lower Flammable Limit: No data Extinguishing Media: Dry chemical, carbon dioxide, water fog Special Fire Fighting Procedures: Avoid directing strong water stream into product - may generate foam Unusual Fire and Explosion Hazards: High heat may produce noxious decomposition product Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: High heat Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers, strong alkalis Amines, ammonia, and irritating fumes Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Low Acute: Chronic: Causes drying and irritation in eyes or on prolonged contact with skin. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

6 Easy Out EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 300 ppm TWA recommended (synthetic isoparaffinic hydrocarbon) Very slight eye and skin reported No components are listed by ACGIH, IARC, or OSHA TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS effects reported effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: Store in plastic or lined metal containers. Use plastic or stainless steel drum pump. SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Small spills may be flushed to sewer with water. Larger spills - soak up on absorbent material and transfer to containers for disposal. Flush to sewer or dispose of material and container in nonhazardous municipal landfill in compliance with all local, state, and federal regulations. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Splashing into eyes or prolonged or repeated contact with skin may cause irritation. FIRST AID: In case of contact with eyes, flush 15 minutes with water. Wash off of skin. If swallowed, do NOT induce vomiting. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: No treatment necessary. Eyes: Flush eyes 15 minutes with water. Skin: Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 7, 2008 Replaces MSDS of: June 17, 2004

7 MATERIAL SAFETY DATA SHEET PRODUCT HYDRO SPOT NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 2 Moderately combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Spot and stain removal agent for drycleaning only. Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Terpene hydrocarbons % CAS # OSHA PEL 100 ppm TWA LD 50 oral: 5 g/kg (rat) dermal: 5 g/kg (rabbit) SECTION 3: PHYSICAL DATA Appearance: Yellow-orange liquid Odor: Citrus odor Specific Gravity (20 C): ph (20:80 in IPA/H2O Soln.): Boiling Point: 257 F Solubility in Water: Slight - forms emulsion Vapor Pressure (mm Hg): No data Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): 108 (TCC) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: 6.1 (terpene hydrocarbons) Lower Flammable Limit: 0.7 (terpene hydrocarbons) Dry chemical, carbon dioxide, water fog, or other media for Class B fires. Wear self-contained breathing apparatus. Cool containers with water spray. Vapors may form combustible or explosive mixture with air. Combustible products may be toxic. Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: Use or storage at temperatures over 120 F Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers Burning may produce toxic, irritating vapors. Will not occur. SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Slight Acute: Chronic: Exposure to high concentrations of vapors may cause headaches, nausea, dizziness, or nose, throat, or eye irritation. Contact with eyes, prolonged or repeated contact with skin may cause drying or irritation. Prolonged or repeated exposure can cause drying, defatting, and dermatitis of skin. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

8 Hydro Spot EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 100 ppm TWA (terpene hydrocarbons) Slight eye and skin reported No components are listed by ACGIH, IARC or OSHA TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Local exhaust at work station recommended. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in closed containers in a well ventilated area. Keep containers closed when not in use. Keep away from heat and open flame. Avoid breathing vapors. Keep from sources of ignition. Soak up on absorbent material (sawdust, etc.) and shovel into containers for disposal. Dispose of in manner that complies with all local, state, and federal regulations for combustible wastes. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Combustible. Keep away from heat and open flames. Use with adequate ventilation. Avoid prolonged breathing of vapors. Avoid contact with skin and eyes. FIRST AID: Remove person overcome by vapors to fresh air. In case of contact with eyes, flush for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Remove person overcome by vapors to fresh air. Eyes: Flush eyes 15 minutes with water. Skin: Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 10, 2008 Replaces MSDS of: March 2, 2004

9 MATERIAL SAFETY DATA SHEET PRODUCT NEUTRA NFPA HAZARD RATINGS* Health Fire Reactivity 1 Slight health hazard 1 Slightly combustible 0 Nonreactive SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO, Inc., 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Synonyms: Soil and stain removal agent for laundry and drycleaning Neutral lubricant State Registry#: MA Prod. # SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Cyclohexanol ethylene glycol monobutyl ether (EB solvent) % 1-5 <5 CAS # OSHA PEL 50 ppm TWA 25 ppm TWA LD 50 oral: 2060 mg/kg (rat) oral: 470 mg/kg (rat) dermal: 200 mg/kg (rabbit) Hexylene glycol < ppm TWA oral: 3.7 g/kg (rat) dermal: 12.0 g/kg (rabbit) SECTION 3: PHYSICAL DATA Appearance: Clear light yellow Boiling Point: 210 F Odor: Bland Solubility in Water: Miscible Specific Gravity (20 C): Vapor Pressure (mm Hg): No data ph (Water Solution): Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Upper Flammable Limit: (cyclohexanol) Flash Point (Method)( F): 130 (TCC) Lower Flammable Limit: 1.2 (cyclohexanol) Extinguishing Media: Compatible with all types of fire extinguishers. Special Fire Fighting Procedures: Avoid directing strong stream of water into material - may cause foaming. Unusual Fire and Explosion Hazards: Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers Burning produces toxic vapors, irritating fumes Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Very low Acute: Chronic: Eye contact may cause irritation and swelling of conjunctiva. Prolonged skin contact may cause redness and swelling at site of contact. Inhalation may cause dizziness. Kidney and liver effects reported in animals (cyclohexanol). Prolonged skin contact may cause dermatitis. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

10 EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 50 ppm TWA (cyclohexanol), 25 ppm TWA (EB solvent), 25 ppm TWA (hexylene glycol) Slight eye and skin reported Neutra No components are listed by ACGIH, IARC, or OSHA TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS effects reported effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Local exhaust at work station is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: Store in closed containers at temperatures below 50 C. Do not store in unlined metal containers. SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Small spills may be flushed to sewer with water. Large spills - soak up on absorbent material and transfer to containers for disposal as nonhazardous waste. Nonhazardous. Flush small quantities to sewer with water. Soak up large spills on absorbent material and transfer to containers for disposal as nonhazardous waste in compliance with all local, state, and federal regulations. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Splashing in eyes or prolonged or repeated contact with skin may cause irritation. FIRST AID: In case of contact with eyes, flush 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: No treatment necessary. Eyes: Flush eyes 15 minutes with water. Skin: Wash off of skin with soap and water. Ingestion: If swallowed, do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 12, 2008 Replaces MSDS of: March 17, 2004

11 MATERIAL SAFETY DATA SHEET PRODUCT PURO NFPA HAZARD RATINGS* Health Fire Stability 2 Moderate health hazard 1 Slightly combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Stain removal agent for use in drycleaning only. Synonyms: Volatile dry solvent, VDS SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Trichloroethylene % <100 CAS # OSHA PEL LD ppm TWA oral: 4920 mg/kg (rat) SECTION 3: PHYSICAL DATA Appearance: Colorless Liquid Odor: Sweet, like ether Specific Gravity (20 C): ph: Not applicable Boiling Point: 189 F Solubility in Water: 20 C Vapor Pressure (mm Hg): 20 C Vapor Density: Heavier than air SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): >230 (TCC) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: No data Lower Flammable Limit: No data Self-extinguishing Use water spray to keep fire-exposed containers cool. Wear self-contained breathing apparatus. Vapors may develop a flammable atmosphere in confined areas. May decompose to hydrochloric acid at high temperatures in fire. SECTION 5: REACTIVITY DATA Stability: Hazardous Polymerization: Stable Incompatibility (materials to avoid): Hazardous Decomposition Products: Conditions to Avoid: High temperatures may induce thermal decomposition. Avoid open flames. Welding arcs should not be used. Strong oxidizers. aluminum, or zinc coated containers. Hydrogen chloride, phosgene, and other toxic fumes may be produced on burning vapors. Will not occur. SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Very low: oral LD 50: >4920 mg/kg skin absorption Effects of Overexposure: Acute: Chronic: Contact with eyes, prolonged or repeated contact with skin may cause irritation, redness, and drying. Breathing a high concentration of vapors may cause irritation of the nose and throat, dizziness, nausea, or loss of coordination. Carcinogenicity: Trichloroethylene component rated "2A" IARC - "C" NTP - human carcinogen on CA list *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

12 EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT 50 ppm TWA (trichloroethylene) Slight eye and skin known TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY Puro CARCINOGENICITY Trichloroethylene component rated "2A" IARC - "C" NTP - human carcinogen on CA list SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Respiratory Protection: Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES required when used as directed with adequate ventilation. When cleaning up large spills in confined area, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in closed containers in a well ventilated area. Aluminum equipment should not be used for storage or transfer. Keep containers closed when not in use. Small spills - wipe up. Large spills - soak up on absorbent material and transfer into resealable containers for disposal. Liquid product or absorbents containing this product must be disposed on in accordance with applicalbe local, state and federal regulations for chlorinated hydrocarbons. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapors. Harmful if swallowed. FIRST AID: If overcome be vapors, remove person to fresh air. In case of contact with eyes, flush for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Eyes: Skin: Remove person overcome by vapors to fresh air. Flush eyes for 15 minutes with water. Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 7, 2008 Replaces MSDS of: November 16, 2007

13 MATERIAL SAFETY DATA SHEET PRODUCT SEMI WET SPOTTER NFPA HAZARD RATINGS* Health Fire Stability 2 Moderate health hazard 1 Slightly combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Stain removal agent for laundry and drycleaning Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Trichloroethylene % <100 CAS # OSHA PEL 50 ppm TWA LD 50 oral: 4920 mg/kg (rat) SECTION 3: PHYSICAL DATA Appearance: Semi-clear water white liquid Odor: Sweet, like ether Specific Gravity (20 C): 1.25 ph (20:80 in IPA/H2O Soln.): Boiling Point: 188 F Solubility in Water: Forms an emulsion Vapor Pressure (mm Hg): 60 mm 20 C Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): >230 (PM) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: No data Lower Flammable Limit: No data Self extinguishing Use water spray to keep fire-exposed containers cool. Wear self-contained breathing apparatus. Vapors may develop a flammable atmosphere in confined areas. May decompose to hydrochloric acid at high temperatures in fire. SECTION 5: REACTIVITY DATA Stability: Hazardous Polymerization: Stable Incompatibility (materials to avoid): Hazardous Decomposition Products: Conditions to Avoid: High temperatures may induce thermal decomposition. Avoid open flames. Welding arcs should not be used. Strong oxidizers, aluminum, or zinc coated containers. Hydrogen chloride, small amounts of phoscene, irritating fumes at high temperatures. Will not occur. SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Very low: oral LD 50: above 4920 mg/kg skin absorption Effects of Overexposure: Acute: Chronic: Contact with eyes, prolonged or repeated contact with skin may cause irritation, redness, and drying. Breathing high concentration of vapors may cause irritation of the nose and throat, dizziness, nausea or loss of coordination. Carcinogenicity: Trichloroethylene component rated "2A" IARC - "C" NTP - human carcinogen on CA list *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

14 Semi Wet Spotter EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 50 ppm TWA (trichloroethylene) Slight eye and skin reported Trichloroethylene component rated "2A" IARC - "C" NTP - human carcinogen on CA list TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in closed containers in a well ventilated area. Aluminum equipment should not be used for storage or transfer. Keep containers closed when not in use. Small spills - wipe up. Large spills - soak up on absorbent material and transfer into resealable containers for disposal. Liquid product or absorbents containing this product must be disposed of in accordance with applicable local, state, and federal regulations for chlorinated hydrocarbons. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapors. Harmful if swallowed. FIRST AID: If overcome by vapors, remove person to fresh air. In case of contact with eyes, flush for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Remove person overcome by vapors to fresh air. Eyes: Flush eyes 15 minutes with water. Skin: Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 7, 2008 Replaces MSDS of: November 16, 2007

15 MATERIAL SAFETY DATA SHEET PRODUCT Super Tan + NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 1 Slightly combustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO (660) EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) HRS 7 DAYS A WEEK; ADCO (800) (8-5 M-F) Intended Product Use: Stain removal agent for laundry and drycleaners Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Citric acid (dilute solution) % CAS # OSHA PEL LD 50 oral: 975 mg/kg (rat) SECTION 3: PHYSICAL DATA Appearance: Clear, water-white to pale yellow liquid Odor: Sharp, sweet odor Specific Gravity (20 C): ph (Straight): 2-3 Boiling Point: 212 F Solubility in Water: Miscible Vapor Pressure (mm Hg): No data Vapor Density: Heavier than air SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): >230 (PM) Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazards: Upper Flammable Limit: No data Lower Flammable Limit: No data Dry chemical, carbon dioxide, foam, water fog - Compatible with all types Avoid directing strong water stream into material - may cause foaming. Wear self-contained breathing apparatus when fighting fires in confined areas. Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: Storage at temperatures above 120 F (48.8 C) Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers Burning produces toxic, irritating fumes Will not occur. SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Very low Acute: Chronic: May cause drying or irritation if splashed into eyes or on prolonged or repeated contact with skin. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

16 EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT listed by OSHA Slight eye and skin known TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY Super Tan + CARCINOGENICITY No components are listed by ACGIH, IARC, or OSHA SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES SPECIAL PROTECTION INFORMATION Respiratory Protection: required when used as directed with adequate ventilation. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store at temperatures below 120 F. Do not store or dispense in aluminum or iron equipment. Use glass, plastic, or stainless steel liners and containers. Clean up spills on walkways to prevent slick spots. Small spills may be flushed to sewer with water. Large spills - soak up on absorbent material and transfer to containers for disposal as nonhazardous waste. Flush small quantities to sewer or dispose of material in container in municipal landfill in compliance with all local, state, and federal regulations. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Splashing into eyes or prolonged or repeated contact with skin may cause irritation. FIRST AID: In case of contact with eyes, flush for 15 minutes with water. Wash off of skin with soap and water. If swallowed, do NOT induce vomiting. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Eyes: Skin: Remove victim to fresh air Flush eyes for 15 minutes with water. Wash off of skin with soap and water. Ingestion: Do NOT induce vomiting. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does not contain any components which are under the reporting requirements of SARA Title III, Section 313. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: November 7, 2008 Replaces MSDS of: January 16, 2008

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET W TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION MATERIAL SAFETY DATA SHEET PRODUCT "W" TEST SOLUTION NFPA HAZARD RATINGS* Health Fire Stability 2 Moderate health hazard 3 Highly flammable 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET U.S. Oil Co., Inc. Lubricants Division 425 S. Washington St, Combined Locks, W/54113 Phone 920-735-8298 MATERIAL SAFETY DATA SHEET PRODUCT NO.: 175 PRODUCT TRADE NAME: REVISION NUMBER: 1947 PREPARATION/REVISION

More information

Safety Data Sheet 1818BR

Safety Data Sheet 1818BR Safety Data Sheet 1818BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: 4 Glass Cleaner Glass & Surface Cleaner Use only for the purpose

More information

Material Safety Data Sheet

Material Safety Data Sheet Page 1 of 6 Material Safety Data Sheet SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION: 1.1 Product Name: EGS Mortar & Grout System (Part A) 100% Epoxy 1.2 Company Identification: Southern Grouts and Mortars,

More information

Safety Data Sheet 1533BR

Safety Data Sheet 1533BR Safety Data Sheet 1533BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Spotter Carpet Cleaner Use only for the purpose on product

More information

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET PAGE 1 1254 Chestnut Street Newton, MA 02464-1418 Tel: (617) 965-5511 Fax: (617) 965-5818 MATERIAL SAFETY DATA SHEET PAGE 1 SECTION 1. CHEMICAL IDENTIFICATION ---------------------------------------------------------

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Bond 200 Catalyst C May 7, 2013 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC 27611 919-365-3800

More information

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 Product Type: Lubricant Emergency Contact: Chemtrec Phone (24 hours): (800) 424-9300 Part Number(s): 19-070

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Line Rosin Solvent November 22, 2005 Vishay Micro-Measurements Post Office Box 27777 Raleigh, NC 27611 919-365-3800

More information

Name: SoluDent 30 Concentrate Developer Product Number: , Product Use: Photographic Developer

Name: SoluDent 30 Concentrate Developer Product Number: , Product Use: Photographic Developer SAFETY DATA SHEET Section 1: Product and Company Identity Name: SoluDent 30 Concentrate Developer Product Number: 240-79,240-76 Product Use: Photographic Developer Distributed By: Henry Schein Telephone:

More information

Safety Data Sheet 1797SYM

Safety Data Sheet 1797SYM Safety Data Sheet 1797SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Key Glass & Surface Cleaner RTU Ready To Use Glass Cleaner

More information

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101 MATERIAL SAFETY DATA SHEET Quick Identifier (In Plant Common Name): SP-101 MANUFACTURER INFORMATION MANUFACTURER'S NAME: SPRAY PRODUCTS CORPORATION ADDRESS: P.O.BOX 737 NORRISTOWN, PA 19404 EMERGENCY TELEPHONE

More information

Safety Data Sheet 1628SYM

Safety Data Sheet 1628SYM Safety Data Sheet 1628SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Solo Gum & Grease Remover Solvent Based Gum Remover Use only

More information

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221 ISSUE DATE: July 28, 2004 IDENTITY: Chloraprep 2% Component 51964, 27132 SECTION 1 MARKETED OR DISTRIBUTED BY: Medline Industries, Inc. One Medline Place Mundelein, IL 60060 1.800.MEDLINE Emergency Telephone

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET EC-100 UL Top Coat 08/14/08 MSDS DATE: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: EC-100 UL Top Coat MANUFACTURER: ADDRESS: Pro-Tech Products, Inc. 3003 N. 73

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Sasol Solvents Trading as Sasol Chemicals North America LLC 900 Threadneedle Houston, Texas 77079 MATERIAL SAFETY DATA SHEET EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 MSDS or Product Information: 281

More information

Safety Data Sheet 1126SYM

Safety Data Sheet 1126SYM Safety Data Sheet 1126SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Loco Oven, Grill & Hood Cleaner Oven and Grill Cleaner Use

More information

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA MATERIAL SAFETY DATA SHEET EPOXY TECHNOLOGY 14 FORTUNE DRIVE PRODUCT NAME: EpoTek OG154-1 BILLERICA, MA 01821 Single Component EMERGENCY PHONE: *HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 (978) 667 3805 Carcinogen:

More information

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology. MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK H70E-2, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH-2 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:

More information

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET PAGE 1 1254 Chestnut Street Newton, MA 02464-1418 Tel: (617) 965-5511 Fax: (617) 965-5818 MATERIAL SAFETY DATA SHEET PAGE 1 SECTION 1. CHEMICAL IDENTIFICATION ---------------------------------------------------------

More information

Safety Data Sheet 1454

Safety Data Sheet 1454 Safety Data Sheet 1454 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Citra-Cide Disinfectant/Cleaner/Sanitizer Use only for the purpose

More information

Safety Data Sheet 1225BR

Safety Data Sheet 1225BR Safety Data Sheet 1225BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: High Gloss Finish Floor Finish Use only for the purpose on

More information

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture Air Tool Lubricant MSDS Product # s : ATL004, ATL016, ATL032, ATL128, ATL55, A145-4, A145-16, A145-32, A145-128 Section 1 : Chemical Product And Company Information Product Name : Manufacturer Name : General

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Premium AW Hydraulic Oil 68 Date Prepared: 07/01/2006 Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name Premium AW Hydraulic Oil 68 Chemical Name Mixture

More information

SAFETY DATA SHEET. Section 1: Product and Company Identity

SAFETY DATA SHEET. Section 1: Product and Company Identity SAFETY DATA SHEET Section 1: Product and Company Identity Name: Gendex Process Chemistry - Developer Product Number: 1.0069274 & 0.8223045 (296-49,296-40) Product Use: Photographic Developer Manufacturer:

More information

Safety Data Sheet 1432BR

Safety Data Sheet 1432BR Safety Data Sheet 1432BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Oxy Citrus All-In-One Concentrated, All-Surface Peroxide Based

More information

Safety Data Sheet 1565BR

Safety Data Sheet 1565BR Safety Data Sheet 1565BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Enzyme Cleaner & Deodorizer Cleaner & Deodorizer Use only for

More information

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821 MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:

More information

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET Cyclo Max Clean Foam Cleaner, C192 MSDS Page 1 of 4 CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET This MSDS is being provided to your company for the purpose of providing current health and safety information

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet 1. MATERIAL IDENTIFICATION Material Name: Uses: Glass Cleaner Product Code: 5071268 Emergency Telephone Number Transport / Spill Information: (CHEMTREC) 1-800-424-9300, Local:

More information

Rest Easy SECTION 1 - IDENTIFICATION SECTION 2 - INGREDIENTS. The remaining components of this product comprise proprietary information.

Rest Easy SECTION 1 - IDENTIFICATION SECTION 2 - INGREDIENTS. The remaining components of this product comprise proprietary information. MATERIAL SAFETY DATA SHEET Rest Easy SECTION 1 - IDENTIFICATION Manufactured for: RMB Group, LLC 474 SE Southwood Trail Stuart, Fl. 34997 24 Hour Emergency Phone: (901) 239-4769 CHEMTREC: (800) 424-9300

More information

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS Page 1 Chemical Family: Glycols Material Safety Data Sheet Propylene Glycol 38% Section 1: PRODUCT INFORMATION Supplier: LynCar Products Ltd 30 Hedgedale Road Brampton, Ontario L6T 5L2 Emergency Phone

More information

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046 Product Name: TRILOGY MSDS Page 1 of 5 MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046 1. CHEMICAL PRODUCT AND COMPANY INFORMATION PRODUCT NAME... : TRILOGY

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Coat D April 13, 2010 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC 27611 919-365-3800 CHEMTREC

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 Product Type: Specialty Emergency Contact: Chemtrec Product Name: GC Acrylic Plastic Phone (24 hours): (800)

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Section I General Information Manufacturer: HMIS Rating KAL-GARD HEALTH: 1 1347 Poole Street FLAMMABILITY: 1 Mojave, CA 93501 REACTIVITY: 0 (661) 824-8101 Emergency Telephone:

More information

SAFETY DATA SHEET Lead Stop

SAFETY DATA SHEET Lead Stop SAFETY DATA SHEET Lead Stop SECTION 1 Identification Product Name: Lead Stop SDS Number: DCI-061 TiO2 Recommended use: Paint Stripping. Restrictions on use: Use only as directed Manufactured for: DUMOND

More information

Safety Data Sheet 1782SYM

Safety Data Sheet 1782SYM Safety Data Sheet 1782SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Grandioso Lemon Oil Cleaner/Polish/Protectant Use only for

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 03 AUG 2005 MSDS ID# MATERIAL SAFETY DATA SHEET PRODUCT NAME: PART #: SECTION I COMMON NAME: CHEMICAL NAME: FORMULA/CAS: 46-33 SERIES, 46-34 SERIES and 78-55-SERIES SUPPLIER INFORMATION N/A N/A SUPPLIER:

More information

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax: Kardol Quality Products 285 S. West Street Lebanon, Ohio 45036 513-933-8206 Fax: 513-932-6900 MATERIAL SAFETY DATA SHEET # 500121 Trade Name: Epoxy Glue Hardener Section 1: Material Identification Weight

More information

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION LUMINOX Section 1 : PRODUCT AND COMPANY IDENTIFICATION Chemical family: Detergent. Manufacturer emergency phone number: Manufacturer: Alconox, Inc. 30 Glenn St. Suite 309 White Plains, NY 10603. 800 255

More information

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFTEY DATA SHEET NAME OF PRODUCT: AQUA EPOXY COAT MSDS DATE: 07/07/2010 SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Aqua Epoxy Coat SYNONYMS: PRODUCT CODES: XS-011 MANUFACTURER: ADDRESS: Xcel Surfaces 3750

More information

BESSEY SPATTER RELEASE SOLVENT BASED

BESSEY SPATTER RELEASE SOLVENT BASED BESSEY SPATTER RELEASE SOLVENT BASED Chemical family: Mixture. Solvent Based Anti Spatter (Aerosol) Manufacturer emergency phone number: Product uses: Industrial material. Section 1: PRODUCT INFORMATION

More information

Safety Data Sheet LPS300 and LPS301

Safety Data Sheet LPS300 and LPS301 Safety Data Sheet LPS300 and LPS301 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Liquid Pro Scrub 10X Concentrate Performance Enhancing

More information

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 Product Type: Solvent Cleaner Emergency Contact: Chemtrec Product Name: GC Jiffy Bath Contact Cleaner Phone

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet MSDS: 760 SECTION 1: CHEMICAL PRODUCT AND COMPANY INFORMATION Company: HAZARD RATING SCALE IDQ Operating, Inc. Health 1 0 = Insignificant 2901 W Kingsley Rd. Fire: 2 1 = Slight

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Coat C May 15, 2013 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC 27611 919-365-3800 CHEMTREC

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Page: 1 of 5 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Identity (As Used on Label and List): SKF Grease LGMT 2 Product Code: LGMT 2 Product Use: Bearing lubricant Trade

More information

MATERIAL SAFETY DATA SHEET SPRAY 'N' LIFT/LABEL REMOVER AUGUST Distributor's name and address

MATERIAL SAFETY DATA SHEET SPRAY 'N' LIFT/LABEL REMOVER AUGUST Distributor's name and address MATERIAL SAFETY DATA SHEET AUGUST 2000 SECTION I GENERAL INFORMATION Distributor's name and address PerfectData Corporation 110 West Easy Street Simi Valley, California 93065-1689 (805) 581-4000 PRODUCT

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Effective and Print Date: 6/1/11 MSDS #1102011A Page #1 SECTION I - PRODUCT AND COMPANY IDENTIFICATION Product Code: 110 Part A Resin Product Name: NSP 110 Clear Primer/Topcoat Product Class: Modified

More information

Rice Protein Hydrolyzed

Rice Protein Hydrolyzed INCI Name SECTION 1 :: PRODUCT IDENTIFICATION Use of the Substance/Preparation Recommended use of substance/preparation as active ingredient in cosmetics applications Emergency telephone number National

More information

Safety Data Sheet 1452SYM

Safety Data Sheet 1452SYM Safety Data Sheet 1452SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Rondo Bowl & Urinal Cleaner Acid Bowl Cleaner Use only for

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: PL-3 July 14, 2011 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC 27611 919-365-3800 CHEMTREC

More information

SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:

SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC: SAFETY DATA SHEET SECTION 1. INDENTIFICATION Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY 14150 716-871-1161 800-828-7626 CHEMTREC: 800-424-9300 Product Name: Crème Polish, Lustreshine Product

More information

3. COMPOSITION / INFORMATION ON INGREDIENTS

3. COMPOSITION / INFORMATION ON INGREDIENTS 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: MicroC 2000 Publication Date: May 31, 2015 Product Code: NA Replaces: February 26, 2015 Product Use: A reducing agent for biological processes Supplier

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET 1. PRODUCT AND PREPARATION INFORMATION Manufacturer: Bloomco/Division of Double B 5035 North Service Rd., Unit B4 Burlington, Ontario, L7L 5V2, Canada (905)3328070 Emergency

More information

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821 MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH-2 FIRE-1 REACTIVITY- 0 US/CANANDA : 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:

More information

Product Name:Heat Sink Compound 1801 Morgan Street MSDS Number:148

Product Name:Heat Sink Compound 1801 Morgan Street MSDS Number:148 Section 4 - Fire & Explosion Hazard Data Flash Point (method): Flammable Limits-LEL: Flammable Limits-UEL: Extinguishing Agents: Fire Fighting Procedures and Equipment: Decomposition Products May Include:

More information

Material Safety Data Sheet

Material Safety Data Sheet Comet Chemical Company Ltd. 3463 Thomas Street Innisfil,ON L9S 3W4 Tel: (705) 436 5580 Fax: (705) 436 7194 Material Safety Data Sheet TRIETHYLENE GLYCOL Revision Date: 2008/08/08 Section 1 : PRODUCT AND

More information

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients MATERIAL SAFETY DATA SHEET General Finishes Corporation SECTION 1: Material Identification Material Name: Enduro Water Base Lacquer (I-79) Date: December 7, 2009 Material Description: Water-Based Acrylic

More information

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET 1. PRODUCT AND PREPARATION INFORMATION Manufacturer: Rust Check Corporation 6175 Danville Road, Mississauga, Ontario Canada, L5T 2H7 (905)670-5411 U.S.A. 1-800-265-0790 Emergency

More information

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B SAFETY DATA SHEET 1. Identification Product Identifier Other means of identification Product code Recommended use Recommended restrictions Manufacturer information Company name Address Telephone Fax Emergency

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 3 MATERIAL SAFETY DATA SHEET PRODUCT NAME: Enerpac HF Hydraulic Oil STOCK NUMBER: HF100, 101, 102, 104, CM40885 Distributor: Date Issued: 03-04-05 Enerpac Supercedes: 03-01-04 720 West James

More information

Chemical Name: BH-38. Manufacturer: Spartan. Container size: 1 gallon. Location: VLA. Disposal: Place empty container in trash.

Chemical Name: BH-38. Manufacturer: Spartan. Container size: 1 gallon. Location: VLA. Disposal: Place empty container in trash. Chemical Name: BH-38 Manufacturer: Spartan Container size: 1 gallon Location: VLA Disposal: Place empty container in trash. Spartan Chemical Company, Inc. Material Safety Data Sheet SECTION I: PRODUCT

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Section 1: Product and Company Identification Product Name: Poxy Paste Part A Company: Applied Technologies P. O. Box 18476 Fairfield, OH 45018 Telephone: (513) 939-3767 Fax:

More information

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V. LIQUINOX MSDS Section 1 : PRODUCT AND COMPANY IDENTIFICATION Chemical family: Detergent. Manufacturer: Alconox, Inc. 30 Glenn St. Suite 309 White Plains, NY 10603. Manufacturer emergency 800-255-3924.

More information

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line Page 1 of 5 SAFETY DATA SHEET PRODUCT NAME: Color Themes PRODUCT NUMBER: PRODUCT CLASS: Tintable Latex Paint COLOR: White REVISION DATE: 2/25/2015 SECTION 1 IDENTIFICATION MB4908 Product Line COMPANY IDENTIFICATION:

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET ALLFLEET Premium Synthetic Gear Lube 50 Page 1 MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification ---------------------- Product Name: ALLFLEET Premium Synthetic

More information

Bloomco/Division of Double B MATERIAL SAFETY DATA SHEET

Bloomco/Division of Double B MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET 1. PRODUCT AND PREPARATION INFORMATION Manufacturer: Bloomco/Division of Double B 5035 North Service Rd., Unit B4 Burlington, Ontario, L7L 5V2, Canada (905)3328070 Emergency

More information

MATERIAL SAFETY DATA SHEETY Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEETY Complies with OSHA Hazard Communication Standard 29 CFR MATERIAL SAFETY DATA SHEETY Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 Product Type: Aerosol Cleaner Emergency Contact: Chemtrec Product Name: Carpet & Upholstery Cleaner Phone (24

More information

Safety Data Sheet 1921SYM

Safety Data Sheet 1921SYM Safety Data Sheet 1921SYM 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Jazz Foaming Cleaner Degreaser Heavy Duty Cleaner/Degreaser

More information

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 09/23/2002 REV: B * HMIS CODE ratings are estimated by Epoxy Technology.

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 09/23/2002 REV: B * HMIS CODE ratings are estimated by Epoxy Technology. MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK 360-ST, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:

More information

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15 THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15 SECTION 1: PRODUCT / SUPPLIER IDENTIFICATION PRODUCT NAME: PRODUCT USE: MFR INFO: Denatured Ethanol Fuel / fuel additive The

More information

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification An ISO9001 Certified Company Material Safety Data Sheet Section 1 - Chemical Product and Company Identification MSDS Name: Catalog Numbers: LC14900 Synonyms: None Company Identification: LabChem Inc 200

More information

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION SECURITY COAT Product: 738 Manufacturer emergency phone number: Section 1 : PRODUCT AND COMPANY IDENTIFICATION Manufacturer: Tech international 200 East Coshocton Street P.O. Box 486 Johnstown, Ohio 43031.

More information

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET Final Flat Roof MATERIAL SAFETY DATA SHEET Section I IDENTITY INFORMATION Identity (Tradename): FFR-100 Flexible Roof Coating Part A Product Type: Thermo-set Date Revised: April 10, 2008 CHEMTREC Emergency

More information

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007 MSDS NO.: 0691012 DATE: May 22, 2007 1) PRODUCT AND COMPANY IDENTIFICATION Product: Budget Citrus Spray Product No.: BCS-013 Product Type: Aerosol Mold Cleaner 2) COMPOSITION, INFORMATION ON INGREDIENTS

More information

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

ALCONOX - Powdered Precision Cleaner:  LIQUINOX - Critical Cleaning Liquid Detergent: ALCONOX - Powdered Precision Cleaner: Concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Section 1 General Information Manufacturer: Zinsser Company, Inc. 173 Belmont Drive Somerset, NJ 08875 (732) 469-8100 Emergency Telephone: Chemtrec (800) 424-9300 Date: January

More information

Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( )

Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( ) Safety Data Sheet Product No. 19250 Tissue-Tack Adhesive Issue Date (07-23-15) Review Date (08-31-17) Section 1: Product and Company Identification Product Name: Tissue-Tack Adhesive Synonym: Tissue Tack

More information

Material Safety Data Sheet

Material Safety Data Sheet Page 1 of 6 Material Safety Data Sheet 24 Hour Assistance: 1-847-367-7700 Rust-Oleum Corp. www.rustoleum.com Section 1 - Chemical Product / Company Information Product Name: Identification Number: Product

More information

1461BR Lindell Rd Las Vegas, NV (Customer Service) (800) USA (813) International (Chemtel 24 hrs)

1461BR Lindell Rd Las Vegas, NV (Customer Service) (800) USA (813) International (Chemtel 24 hrs) Safety Data Sheet 1461BR 1 Material and Supplier Identification Product Name: Description: Recommended use of the chemical and restrictions: Turbo DC Disinfectant/Cleaner/Sanitizer Use only for the purpose

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Bond Curing Agent - Type 15 April 13, 2010 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC

More information

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET PAGE 1 1254 Chestnut Street Newton, MA 02464-1418 Tel: (617) 965-5511 Fax: (617) 965-5818 MATERIAL SAFETY DATA SHEET PAGE 1 SECTION 1. CHEMICAL IDENTIFICATION ---------------------------------------------------------

More information

Safety Data Sheet 1421

Safety Data Sheet 1421 Safety Data Sheet 1421 1 Material and Supplier Identification Product Name: Description: Recommended use of the chemical and restrictions: Econopine Pine Cleaner Use only for the purpose on product label.

More information

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Date Revised: 7/18/2013 Page: 1 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity Product Name: Mold Release Product Numbers: 105685 Product Use: Water-Based Release Agent Company

More information

MSDS THE PENRAY COMPANIES, INC.

MSDS THE PENRAY COMPANIES, INC. 1 of 5 1 PRODUCT AND COMPANY IDENTIFICATION Manufacturer The Penray Companies, Inc. 440 Denniston Ct. Wheeling, IL 60090 Contact: EH&S Manager Telephone Number: 847-459-5000 FAX Number: 847-459-5043 E-Mail:

More information

Material Safety Data Sheet

Material Safety Data Sheet ES800 Gram Stain Kit Page 1 of 8 M S D S Material Safety Data Sheet 24 HOUR EMERGENCY TELEPHONE NUMBER CALL CHEMTREC 1-800-424-9300 189 Twin County Road Morgantown, PA 19543 (610) 524-5810 ES800 is a gram

More information

T.J. RONAN PAINT CORP. SAFETY DATA SHEET FOR PROFESSIONAL GRAPHIC ARTS COATINGS SECTION I - PRODUCT IDENTIFICATION

T.J. RONAN PAINT CORP. SAFETY DATA SHEET FOR PROFESSIONAL GRAPHIC ARTS COATINGS SECTION I - PRODUCT IDENTIFICATION Page 1 of 8 T.J. RONAN PAINT CORP. SAFETY DATA SHEET FOR PROFESSIONAL GRAPHIC ARTS COATINGS SECTION I - PRODUCT IDENTIFICATION MANUFACTURER'S NAME: T.J. RONAN PAINT CORP. 749 EAST 135TH. STREET BRONX,

More information

GulfTEC Synthetic Motor Oil 0W-20

GulfTEC Synthetic Motor Oil 0W-20 GulfTEC Synthetic Motor Oil 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification ---------------------- Product Name: GulfTEC Synthetic Motor Oil Product Number: 330212 Synonyms: Synthetic

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer: Saw Blade Cleaner FRANMAR CHEMICAL, INC. 10282 E. 1400 North Rd. Bloomington, IL 61705 Emergency

More information

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: 270-218 Product Name: Chemical Family: compound Manufacturer

More information

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT CODES: Stick-it! ast-05 MANUFACTURER: Clean Plus, Inc. DIVISION: N/A ADDRESS: 138 East Main Street / PO Box 678 West Concord,

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Product Name: Rejex-it Fog Force HMIS Codes: H F R P Product Code: 1 1 0 B Section I Manufacturer Identification Manufactured For: Ceannard Inc Address: PO Box 2404 - Gastonia,

More information

Safety Data Sheet Cytology Fixative Spray

Safety Data Sheet Cytology Fixative Spray SECTION 1: IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER 1.1 Product Identifier Trade name: Product identifier: 4240-CYT-017 1.2 Relevant Identified Uses of the Substance or Mixture and

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Lyden Oil ProGuard EDM Fluid MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: ProGuard EDM Fluid Synonyms: Petroleum Lubricating Oil, Petroleum

More information

Enerpac, A Division of Actuant N86 W12500 Westbrook Crossing Menomonee Falls, WI Phone: (262) Fax: (262)

Enerpac, A Division of Actuant N86 W12500 Westbrook Crossing Menomonee Falls, WI Phone: (262) Fax: (262) Enerpac, A Division of Actuant N86 W12500 Westbrook Crossing Menomonee Falls, WI 53051 Phone: (262) 293-1500 Fax: (262) 293-7040 INHALATION: Remove exposed person to fresh air if adverse effects are observed.

More information

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5 Safety Data Sheet Tuxton Select Full Synthetic 0W20 API SN/GF-5 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: Tuxton Select Full Synthetic 0W20 API SN/GF-5 Synonyms:

More information

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( ) Material Safety Data Sheet Product No. 27055 PELCO CryO-Z-T Issue Date (02-27-08) Review Date (06-01-12) Section 1: Product and Company Identification Product Name: PELCO CryO-Z-T Synonym: Cryo Embedding

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Section I. Product Identification and Uses Product Name Label & Sticker Remover CI# Synonyms DSL Chemical Name CAS # Chemical Formula Chemical mixture. Code SLSR Chemical Family

More information