Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck

Size: px
Start display at page:

Download "Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck"

Transcription

1 Pool & Fountain Paints & Deck Coatings Guide The paint system for every residential or commercial pool, fountain and deck

2 EPOXY EP Epoxy Pool Paint EP Hi-Build Epoxy Pool Paint This superior high build epoxy coating is formulated to provide the longest lasting finish of any pool paint. Renovates aged concrete, plaster, and fiberglass/ gelcoat surfaces Provides up to eight or more years of service life Satin finish Abrasion and chemical-resistant An excellent choice for spas and slides on bare surfaces Alternative to plastering at one-third the cost Three hour pot-life when component A and B (catalyst) are mixed together Do not apply to weak or unsound surface Non-tintable 2 Mixing Mix Part A Mixing with Part B Protects previously painted epoxy or unpainted concrete/plaster/fiberglass/ gelcoat swimming pools and spas Excellent choice for water park facilities, including lazy rivers High gloss, tile-like finish provides ease of cleaning Abrasion and chemical-resistant Eight-hour pot life when component A and B (catalyst) are mixed together at 75 degrees F BEACH BEIGE This premium low film build epoxy coating is formulated to provide ease of and excellent coverage rates. Up to 125 sq ft per kit 5-7 dry days outdoors orsolvent Xylene Fill days Time on first coat; 300 sq ft indoors Clean-Up BEACH BEIGE DARK BLUE ROYAL BLUE VERMILLION RED Mixing Mix Part A Mixing with Part B Up to 200 sq ft per Fill Time kit on first coat; up to days indoors 500 square feet Solvent Clean-Up

3 WATER-BASED DS Water-Based Acrylic Pool Paint This acrylic pool paint is formulated to offer all of the advantages of water-based technology. It can be applied over most previously painted pool surfaces and in damp environments. Aqualuster Water-Based Acrylic Pool Paint This acrylic coating can topcoat existing acrylic surfaces and is VOC compliant throughout the US. Excellent solution when short down-time is critical Adheres best on a cool, damp (not wet), and extremely clean surface Matte finish Not for use on fiberglass/gelcoat pools and spas Do not store product at temperatures less than 32 F Can be applied to damp (not wet) surfaces Two coat system Gloss finish provides ease of cleaning Not for use on fiberglass Not for use in spas or hot tubs Do not store at temperatures below 32º Do not use on bare surfaces BEACH BEIGE DARK BLUE ROYAL BLUE BRICK RED DARK BLUE ROYAL BLUE Up to 250 sq ft per kit on first coat; up to 400 sq ft /gal 10 days indoors Soap & Water Up to 450 sq ft /gal Soap & Water 3

4 RUBBER-BASED A-2 Premium Rubber-Based Paint This premium rubber coating is formulated to provide excellent hiding, coverage, and protection. It restores and upgrades previously painted chlorinated rubber and synthetic rubber surfaces. It is VOC Compliant for all 50 states and Canada. Superior coverage rate compared to other rubber based paints High gloss finish allows for easy cleaning Easy to apply by roller or airless spray Must be applied to a dry surface Not for use on spas or fiberglass/gelcoat surfaces Best when used to topcoat previously painted synthetic or chlorinated rubber painted surfaces Ultra Pro 2000 Low VOC Rubber Pool Paint This commercial rubber coating is competitively priced and designed for commercial use where pool maintenance is scheduled annually. Compatible with chlorinated rubber painted swimming pools and synthetic rubber coated pools, flat finish Up to 2 years of service life Use Skid-Tex Additive to achieve non-slip surface VOC compliant in all 50 states Must be applied to dry surfaces Flat finish Not for use on spas or fiberglass/gelcoat pools VOC restrictions may apply Available Colors: NEW! Up to 250 sq ft on first coat; up to 400 sq ft /gal 10 days indoors Up to 250 sq ft on first coat; up to 400 square feet on recoats days indoors 4

5 Pro 2000 Chlorinated Rubber This chlorinated rubber coating is competitively priced and designed for commercial use where pool maintenance is scheduled annually. Compatible with chlorinated rubber painted swimming pools Must be applied to dry surfaces Flat finish Not for use on spas or fiberglass/gelcoat pools VOC restrictions may apply Available Colors: Type A Chlorinated Rubber This premium chlorinated rubber coating is formulated to provide excellent hiding, coverage, and protection. It restores and upgrades previously painted chlorinated rubber surfaces and has been the paint choice of swimming pool professionals for more than 70 years. Superior coverage rate compared to other chlorinated rubber paints High gloss finish allows for easy cleaning Easy to apply by roller or airless spray Must be applied to a dry surface Not for use on spas, or fiberglass/gelcoat pools VOC restrictions may apply DARK BLUE ROYAL BLUE 175 square feet on bare surface; up to 300 square feet days indoors 300 square feet on bare surface; up to 400 square feet days indoors 5

6 DECK PRODUCTS Acrylic Deck Coat This water-based acrylic deck coating is formulated for upgrading Kool-Deck and other textured concrete deck surfaces. Keeps your deck cool while protecting it from harsh UV rays Not intended for immersion Direct contact with strong acids or chlorine solutions may cause discoloration Not for use on wood decks Do Not Spray Available Colors: DECK COAT ARIZONA SAND CAYMAN SAND DUNE SHADOW SILVER CREEK WHISPER ACCESSORY PRODUCTS Skid-Tex This non-skid additive creates a slip-resistant surface on concrete decks or pool surfaces. It can be used with all RAMUC Pool Paints. Recommended use is one carton (1 lb.) per gallon or broadcast as needed on first coat of paint followed by a second coat to seal the surface. Polyurethane Sealants Vulkem 116 is an excellent general-purpose polyuretane sealant designed for use on poured and pre-cast concrete, masonry work, and similar types of construction joints. Vulkem 45SSL is a one-part, moisture-curing, lowmodulus polyurethane sealant. It provides exceptional wear and tear resistance required in high traffic areas. Formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, floors and other horizontal surfaces. Roller/Brush 150 square feet on bare surface; up to 300 sq ft /gal Walk Time 2 Dry Days Soap & Water Specially formulated to reduce spray applied solvent base pool paints. Cleans rollers and spray equipment. 6

7 BEFORE YOU PAINT... WHAT PAINT TO USE Ramuc Pool Paint COMPATIBILITY CHART PAINT TYPE EPOXY RUBBER ACRYLIC Product Name EP Hi Build EP Type A Pro 2000 Ultra Pro 2000 Type A2 DS Aqualuster BARE SURFACES Concrete HHH HH HHH HH HH HH H T Plaster HHH HH HHH HH HH HH H T Fiberglass HHH HH T T T T T T Gunite HHH H T T T T T T Marcite HHH HH HHH HH HH HH H T SURFACE WITH EXISTING COATING Chlorinated Rubber T T HHH HH HH HHH HH H Synthetic Rubber T T T T T HHH HH H Epoxy HHH HH T T T T H T Acrylic T T T T T T HHH HH DURABILITY Chemical Resistance HHH HHH HH H H HH H H Stain Resistance HHH HHH HHH H H HHH H HH Life Expectancy *Residental up to 8 years up to 4 years up to 4 years up to 2 years up to 2 years up to 4 years up to 2 years up to 2 years *Commercial up to 5 years up to 3 years up to 3 years 1 Season 1 Season up to 3 years 1 Season 1 Season * Water chemistry, surface prep and use, etc. will effect the life of all paints. RATING: GOOD H BETTER HH BEST HHH Do Not Use T To Determine the existing coating on your pool, send a sample chip for analysis to RAMUC Pool Paint HOW MUCH PAINT TO USE Estimating the Quantity of Paint Required: Below are the standard pool configurations together with corresponding simple formulas to calculate the square footage of your pool. Keep in mind that the amount of paint you will need depends on whether your pool surface is rough or smooth. The square foot coverage of each type of paint will determine how much product you will need. RECTANGLE ROMAN KIDNEY OVAL LAZY L Length x Width x 1.65 =Total Sqaure Feet Length x Width x 1.5 =Total Sqaure Feet Length x Width x 1.6 =Total Sqaure Feet Length x Width x 1.65 =Total Sqaure Feet Length x Width x 1.55 =Total Sqaure Feet SURFACE PREPARATION Clean & Prep Solution Used to clean and degrease while simultaneously dissolving mineral deposits, increasing porosity for good adhesion on surfaces prior to painting. Mix Clean and Prep with water according to package directions. Ratio is contingent upon type of surface to be cleaned. Dampen surface with water Apply mixed solution with garden sprayer Scrub thoroughly until foaming stops Flush with clear water and hose. Continue until foam is completely gone and water runs clear. (Sprayer is not recommended) NOTE: do not apply to concrete that has already been sealed or stained. Pool Paints / Fountain Paints / Deck Coatings 7

8 RAMUC Pool Paint Beautifies and Protects For more than 70 years, RAMUC Pool Paint has supplied the pool and recreation industry with chlorinated and synthetic rubber, epoxy, and acrylic pool and deck coatings. Our years of experience, coupled with our history of excellent customer service and quality products, have established our commitment to exceed your expectations. Whether you have a backyard pool or spa, an Olympic-size pool or waterpark attraction, our total coatings program offers you quality products, superior service and proven success. Recapture your pool s original beauty. Extend the life of your pool and deck surface with a UV and chemical-resistant finish. Protect your investment. RAM

PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET

PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET Check local VOC DESCRIPTION Pro-Tex Truckbed Liner is a professional, two component, urethane liner system that provides a hard, durable finish and superior

More information

Technical Data Sheet PART A & PART B

Technical Data Sheet PART A & PART B Technical Data Sheet PART A & PART B NuPool Epoxy 2 Pack System PART A Product Description NuPool Epoxy Features: NuPool Epoxy is an isocyanate free, high build gloss epoxy coating that is impervious to

More information

DFT in excess of 8.0 mils per coat is not recommended.

DFT in excess of 8.0 mils per coat is not recommended. SELECTION & SPECIFICATION DATA Generic Type Description Features Color Gloss Primer Dry Film Thickness Cross-linked epoxy polymeric amine An all-purpose immersion-grade epoxy that has a variety of attributes

More information

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications GENERAL DESCRIPTION Imron Industrial Strength Clear, 9C01, is a high gloss, high performance clear coat designed to

More information

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy SELECTION & SPECIFICATION DATA Generic Type Description Features Cycloaliphatic Amine Epoxy High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over

More information

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives)

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives) SELECTION & SPECIFICATION DATA Generic Type Description Features Epoxy Polyamide Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can

More information

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199 uses specially selected raw materials, showing excellent weathering and abrasion r resistance to aromatic solvents splash, aliphatic and very polluted atmospheres, especially where there gases that f solutions.

More information

An Axalta Coating Systems Brand. New Look, Lasting Protection.

An Axalta Coating Systems Brand. New Look, Lasting Protection. An Axalta Coating Systems Brand New Look, Lasting Protection. A reputation built on quality, durability, performance, and unrivaled beauty. Representing the next generation of urethane technology, Imron

More information

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required. Other 462;463;9880;464;1500;7021 1,2 462 epoxy VValidationDate). 1 Product description This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an anti-skid coating.

More information

Self-priming. May be applied over most generic types of coatings.

Self-priming. May be applied over most generic types of coatings. SELECTION & SPECIFICATION DATA Generic Type Description Features Polymeric epoxy amine. Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with

More information

*Valid if manufactured at a certified location. Light Grey (0700), White (0800), and Light Blue (0100). Colors are unmatched

*Valid if manufactured at a certified location. Light Grey (0700), White (0800), and Light Blue (0100). Colors are unmatched SELECTION & SPECIFICATION DATA Generic Type Description Features High solids polyamine-epoxy Ultra high solids epoxy that is designed as a liner for potable water, demineralized water, wastewater and many

More information

Two coats are normally recommended. Some service may require mils DFT

Two coats are normally recommended. Some service may require mils DFT SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness High solids phenolic-epoxy High performance, high solids, epoxy lining that is recommended for a

More information

XL7000 Complete Chlorine Pool Kit

XL7000 Complete Chlorine Pool Kit XL7000 Complete Chlorine Pool Kit Rating: Not Rated Yet Price: Ask a question about this product Description WHAT COMES IN THE KIT? Pool Framework XL7000 Pool Model Our XL7000 Above Ground Swimming Pools

More information

For Establishing and Maintaining Your Spa using PROtech Spa Chemicals

For Establishing and Maintaining Your Spa using PROtech Spa Chemicals Spa Care For Establishing and Maintaining Your Spa using PROtech Spa Chemicals QUICK START Add water up to the level recommended by the manufacturer of your spa and let the pump circulate for at least

More information

PD100 White, PD200 Black Low VOC Acrylic Polyurethane Topcoat

PD100 White, PD200 Black Low VOC Acrylic Polyurethane Topcoat PD100 White, PD200 Black Low VOC Acrylic Polyurethane Topcoat PRODUCT DESCRIPTION PRODUCT DATA SHEET PRISM Direct-To-Metal(DTM) Urethane Topcoat is a premium two-component acrylic polyurethane system designed

More information

Imron Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality)

Imron Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality) Imron 2.1 + Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality) GENERAL DESCRIPTION A high solids aliphatic polyurethane enamel available in multiple gloss levels. It may be applied by brush, roll

More information

Aerodur 2111 Chrome Free Primer

Aerodur 2111 Chrome Free Primer Technical Data Sheet Product Group High Solid Epoxy Chromate Free Primer Characteristics - A VOC compliant, chrome free, corrosion inhibiting, urethane Product compatible, Skydrol resistant primer for

More information

COATINGS SPRAY GUIDE Urethane 520

COATINGS SPRAY GUIDE Urethane 520 This guide covers handling and airless spray application of AWS URETHANE 520 single component, moisture-cured polyurethane elastomeric coating. Airless spray is an effective method of application particularly

More information

Hardener: at least 24 months when stored cool and dry

Hardener: at least 24 months when stored cool and dry DESCRIPTION Satin Engineered Siloxane PRINCIPAL CHARACTERISTICS Virtually HAPs free, low VOC High durability in challenging environments Tough and abrasion resistant Resists dirt pickup, easily cleaned

More information

Paintchlore ALIPHATIC ONE-COMPONENT POLYURETHANE RESIN FOR SWIMMING-POOL PROTECTION

Paintchlore ALIPHATIC ONE-COMPONENT POLYURETHANE RESIN FOR SWIMMING-POOL PROTECTION Paintchlore ALIPHATIC ONE-COMPONENT POLYURETHANE RESIN FOR SWIMMING-POOL PROTECTION DESCRIPTION Paintchlore is a performance polyurethane resin, aliphatic isocyanate-based, that cures upon reaction with

More information

Protective & Marine Coatings

Protective & Marine Coatings Protective & Marine Coatings General POlymers 3462 AQUARMOR COATING WATER-BASED EPOXY Part A GP3462 Series Part B GP3462B01 Hardener Revised January 8, 2015 Product Description GENERAL POLYMERS 3462 AquArmor

More information

Advantages of ALEXIT BladeRep

Advantages of ALEXIT BladeRep Advantages of ALEXIT BladeRep Product can be used individually or as a complete system User-friendly packaging for repairs of any size Easy mixing and application Specifically designed for blade repair

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 31462;9441 1,2 31462 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

SPECIALLY ENGINEERED TO HELP GROW YOUR BUSINESS

SPECIALLY ENGINEERED TO HELP GROW YOUR BUSINESS SPECIALLY ENGINEERED TO HELP GROW YOUR BUSINESS When you choose Imron Elite, you get more than paint you get the industry benchmark in color, appearance and productivity. While some manufacturers make

More information

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above)

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above) DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear IDENTITY CODE DIAMOND COAT PLUS DCU 2035 Hardener Medium Temperature DCX 8 Hot Temperature/Force Dry DCX 9 General Purpose DCX 61 DCU 2035 DT Reducers

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested) Approved 34802;34803;36922;37662 1,2 34802 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build

More information

MAINTAINING THE. Perfect Balance IN UNIVERSITY POOLS. by Ellen Meyer

MAINTAINING THE. Perfect Balance IN UNIVERSITY POOLS. by Ellen Meyer MAINTAINING THE Perfect Balance IN UNIVERSITY POOLS by Ellen Meyer In the most simple terms, over stabilization occurs when too much cyanuric acid is added to pool water. Over stabilization is a problem

More information

Before you begin your job you will need: Tiling Hints: Factory Tile:

Before you begin your job you will need: Tiling Hints: Factory Tile: Before you begin your job you will need: 1. Solvent = Alcohol or Acetone 2. Pencil 3. Single edge razor blades 4. Small water pail 5. Liquid dish soap 6. Role of paper towels 7. Caulking gun 8. Use a wooden

More information

10P20-13 High Solids Primer

10P20-13 High Solids Primer Technical Data Sheet Product Group Epoxy primer Characteristics Product Information This low VOC two-component epoxy primer exhibits excellent corrosion resistance with good flexibility and chemical resistance.

More information

Imron 2.1 HG + Polyurethane High Gloss Topcoat

Imron 2.1 HG + Polyurethane High Gloss Topcoat Imron 2.1 HG + Polyurethane High Gloss Topcoat Product Data Sheet (Mix Quality QH) Description: DuPont Imron 2.1 HG + is the new generation of Imron technology. Based upon unique DuPont formulations and

More information

Versatile On Ground/Semi-Inground Pool Systems. Featuring the ROCKWOOD. and CHAMPLAIN Series. lathampool.com

Versatile On Ground/Semi-Inground Pool Systems. Featuring the ROCKWOOD. and CHAMPLAIN Series. lathampool.com Versatile On Ground/Semi-Inground Featuring the ROCKWOOD and CHAMPLAIN Series lathampool.com On Ground/Semi-Inground The ultimate in backyard fun, a swimming pool is a lasting investment your whole family

More information

weber.cote Pool Paint

weber.cote Pool Paint weber.cote Pool Paint weber.cote Pool Paint weber.cote Pool Paint is a cement-based, integrally coloured, waterproof finish, specifically formulated for the revamping of marble plastered pools. Applied

More information

T17 Scrubber PARTS & CONSUMABLES

T17 Scrubber PARTS & CONSUMABLES T7 Scrubber PARTS & CONSUMABLES SERIAL # Only genuine Tennant parts can ensure peak performance for the life of your equipment. BRUSHES Excellent cleaning performance, designed and engineered specifically

More information

SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text. SECTION 10185 SHOWER AND BATH ENCLOSURES Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bathtub wall enclosures. B. Shower wall

More information

Property Test/Standard Description

Property Test/Standard Description Approved 35042;33404 2 35042 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It provides superior resistance

More information

Slam Dunk GYM SYSTEM. The 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH GUARANTEED TO LAST 2 YEARS

Slam Dunk GYM SYSTEM. The 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH GUARANTEED TO LAST 2 YEARS The Slam Dunk GYM SYSTEM 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH WILL OUTPERFORM ALL 350 VOC GYM FINISHES MANUFACTURED TODAY GUARANTEED TO LAST 2 YEARS POLYSACCHARIDES THE POLYMER Slam

More information

Imron 2.1 PR Polyurethane Primer

Imron 2.1 PR Polyurethane Primer Imron 2.1 PR Polyurethane Primer GENERAL DESCRIPTION A two-package, VOC conforming (2.1 lbs/gal) low HAPS primer based on Axalta polyurethane technology. The resulting primer is designed to deliver a smooth

More information

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description Product Data Sheet August 2006 FOR PROFESSIONAL USE ONLY Product Primecoat P565-625 Description P565-625 Primecoat - Greyish green P275-124 Standard Activator P275-232 Slow Activator P275-292 Extra Slow

More information

Property Test/Standard Description

Property Test/Standard Description Approved 18400;18360 1,2 18400 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a surface tolerant, high solids, high build product. Specially designed

More information

S P A C A R E G U I D E

S P A C A R E G U I D E SPA CARE GUIDE There are many reasons why you own and use your spa: Relaxation. Therapy. Entertainment. Comfort. No matter why you use your spa, when you are using it, you are relaxing by submerging yourself

More information

ARM & HAMMER Baking Soda

ARM & HAMMER Baking Soda Pool Care: Made Easy Crystal Clear Opening ARM & HAMMER Baking Soda 1 A Safe and Natural Start ARM & HAMMER Baking Soda is the quick, safe and natural way to open your pool for the season. Use our conveniently

More information

Heresite VR-514 T E C H N I C A L D A T A S H E E T

Heresite VR-514 T E C H N I C A L D A T A S H E E T Heresite VR-514 Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became

More information

Lifeline Exterior. Our Value Priced Exterior Wall Stain

Lifeline Exterior. Our Value Priced Exterior Wall Stain Exterior Wood Stain & Finishes Lifeline Exterior Our Value Priced Exterior Wall Stain Our original exterior wall formula has been updated and improved for over 20 years. Lifeline Exterior forms a thin

More information

PRODUCT CATALOG 2018 Reinforced Swimming Pool Membranes and Accessories

PRODUCT CATALOG 2018 Reinforced Swimming Pool Membranes and Accessories PRODUCT CATALOG 2018 Reinforced Swimming Pool Membranes and Accessories Dear customers and partners, our world is changing at a rapid pace, be it in climate and environment or digital, economic and political.

More information

COATINGS SPRAY GUIDE Acrylics (210, 211, 211HT, and 212)

COATINGS SPRAY GUIDE Acrylics (210, 211, 211HT, and 212) This guide covers handling and airless spray application of American WeatherStar waterborne single component acrylic elastomeric coatings. These American WeatherStar products require only complete evaporation

More information

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience DTM Coatings for Rail Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience Polyaspartic Topics Resin Technology Use in Rail Market New Developments in Technology Polyaspartic Coatings What

More information

Mix ratio (by volume for base and activator): CA8022/B7022 (base component) CA8020DX (activator component) 920K058 (pumice component)

Mix ratio (by volume for base and activator): CA8022/B7022 (base component) CA8020DX (activator component) 920K058 (pumice component) TECHNICAL DATA SHEET Product Description Desothane HS walkway coating is a high solids, anti-skid polyurethane topcoat. It is used on the upper wings of aircraft to prevent passengers from slipping during

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical) Approved 528;529 1,2 528 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially

More information

Vanguard Complete Chlorine Pool Kit

Vanguard Complete Chlorine Pool Kit Vanguard Complete Chlorine Pool Kit Rating: Not Rated Yet Price: Ask a question about this product Description WHAT COMES IN THE KIT? Pool Framework Vanguard Pool Model Our Vanguard is the latest model

More information

TECHNICAL DATA SHEET 02GN070A. 02GN070A Epoxy Primer. Product Description. Components. Specifications

TECHNICAL DATA SHEET 02GN070A. 02GN070A Epoxy Primer. Product Description. Components. Specifications Epoxy Primer TECHNICAL DATA SHEET Product Description is a high solids, corrosion, chemical and solvent resistant, military epoxy primer for use on the exterior of aircraft. Corrosion inhibiting Chemical

More information

Technical Data Megacote

Technical Data Megacote Technical Data Megacote Product description Megacote is a fast-curing abrasion resistant high solids two-component epoxy anticorrosive coating that will bond to a wide variety of substrates. Recommended

More information

44GN098 Water Reducible High Performance Epoxy Primer

44GN098 Water Reducible High Performance Epoxy Primer Water Reducible High Performance Epoxy Primer TECHNICAL DATA SHEET Product Description Components is a chrome-free, water reducible, chemically cured, polyamide primer with corrosion inhibiting properties.

More information

Property Test/Standard Description

Property Test/Standard Description Approved 14902;14903 2 14902 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured pure epoxy coating. It is a fast drying, high solids, high build product. It has excellent

More information

Chemicals Explained. Lowest Prices Guaranteed! Educated pool owners appreciate our smart packaging POOL CHEMICALS EXPLAINED

Chemicals Explained. Lowest Prices Guaranteed! Educated pool owners appreciate our smart packaging POOL CHEMICALS EXPLAINED Chemicals Explained Lowest Prices Guaranteed! POOL CHEMICALS EXPLAINED The Doheny s line of pool chemicals is specially formulated to keep your pool sparkling clean with minimum effort. This guide provides

More information

44GN072 Water Reducible Low Density Epoxy Primer

44GN072 Water Reducible Low Density Epoxy Primer TECHNICAL DATA SHEET Product Description Components is a water reducible, chemically cured, low density epoxy polyamide primer. Corrosion inhibiting Excellent adhesion Chemical and solvent resistant Resistant

More information

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating DESCRIPTION Two-component, fast dry multi-purpose epoxy coating PRINCIPAL CHARACTERISTICS Multi-purpose high build epoxy Application over a wide range of surface temperatures Suitable for immersion in

More information

D8126 EU-142. CERAMICLEAR Mar and Scratch Resistant Clearcoat. Preparation of Substrate: Required Products. Product Description:

D8126 EU-142. CERAMICLEAR Mar and Scratch Resistant Clearcoat. Preparation of Substrate: Required Products. Product Description: CERAMICLEAR Mar and Scratch Resistant Clearcoat Product Description: CERAMICLEAR is a nano-technology, mar and scratch resistant, high solid clearcoat. This clear is specifically designed for the repair

More information

PRODUCT DATA SHEET. Advanced Industrial Coatings 2.1 VOC Epoxy Primer AIP302 Gray, AIP303 White PERSONAL PROTECTION SURFACE PREPARATION

PRODUCT DATA SHEET. Advanced Industrial Coatings 2.1 VOC Epoxy Primer AIP302 Gray, AIP303 White PERSONAL PROTECTION SURFACE PREPARATION Gray/ White s are a high-solid, direct to metal epoxy primer offering excellent performance properties and is easily topcoatable. Gray/ White can be used with a wide range of topcoats and are considered

More information

ProAir Clear LV 2 Pack

ProAir Clear LV 2 Pack Description The Lesonal Pro Air LV Clear Air Dry 2 PK Clear is an acrylic urethane clearcoat for use over Lesonal WB or SB Basecoat and intended for ambient cure conditions. This Clear offers excellent

More information

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits.

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits. Product Group Epoxy primer Characteristics Product Information - This low VOC two-component epoxy primerr exhibits excellent corrosion resistance with good flexibility and chemical resistance. Components

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 9440;9441 1,2 9440 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

A + a holiday in your own backyard. Pools Built to Perform. No Fuss Installation

A + a holiday in your own backyard. Pools Built to Perform. No Fuss Installation a holiday in your own backyard A + Exceeding Expectations Pools Built to Perform No Fuss Installation Incredible & Credible Every Barrier Reef pool by Australian Outdoor Living exceeds Australian and world

More information

PRODUCT CATALOG 2016/17. Reinforced Swimming Pool Membranes and Accessories

PRODUCT CATALOG 2016/17. Reinforced Swimming Pool Membranes and Accessories PRODUCT CATALOG 2016/17 Reinforced Swimming Pool Membranes and Accessories Reinforced swimming pool membranes are our passion and core business area. As the only worldwide flexible PVC membrane and film

More information

NATIONAL PAINT SYSTEMS SPECIFIER

NATIONAL PAINT SYSTEMS SPECIFIER CONCRETE PLASTER NATIONAL S SPECIFIER () EMULSION BASED (SMOOTH FINISH) - NATIONAL PVA SEALER MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL PVA WHITE MASONRY - NATIONAL AQUA SILOXANE - NATIONAL STUCCO FILLER

More information

Autoclear Mix & Matt

Autoclear Mix & Matt Description is a three component matting finish for application over either Autowave or Autobase Plus in National Rule markets. The desired gloss level can be achieved by mixing the Low Gloss and Semi-Gloss

More information

PACKAGING: Component A W-THANE HBA CD (2,7 L) Component B W-THANE 5057 CD (0,9 L)

PACKAGING: Component A W-THANE HBA CD (2,7 L) Component B W-THANE 5057 CD (0,9 L) W-THANE HBA 851 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyester glossy finishing paint, high solids per volume. Product developed to compose an anticorrosive protection system, high impermeabilization

More information

EC96 HS Epoxy Topcoat. 1 part. ACT197 (Activator) near matt. 1 part

EC96 HS Epoxy Topcoat. 1 part. ACT197 (Activator) near matt. 1 part HS Epoxy Topcoat TECHNICAL DATA SHEET Product Description Epoxy Finish possesses excellent adhesion and high chemical resistance. This combination makes it an ideal topcoat to enhance the protection of

More information

02GN093 Chrome-Free Epoxy Primer. Kit size 02GN093 base 02GN093CAT Gallon 96oz/2.84L 32oz/946mL Quart 24oz/710mL 8oz/237mL

02GN093 Chrome-Free Epoxy Primer. Kit size 02GN093 base 02GN093CAT Gallon 96oz/2.84L 32oz/946mL Quart 24oz/710mL 8oz/237mL TECHNICAL DATA SHEET Product Description is a chrome-free, high solids, corrosion-, chemical-, and solvent-resistant, epoxy primer for use on the exterior of aircraft. Chrome-free Corrosion inhibiting

More information

D8150 EU-139. Performance Clearcoat. Preparation of Substrate:

D8150 EU-139. Performance Clearcoat. Preparation of Substrate: Product Description: GLOBAL REFINISH SYSTEM Performance Clearcoat is a premium quality high solids clear specifically formulated for today s high production shops. The exceptionally short bake cycle and

More information

DuraPad On-Deck Circles

DuraPad On-Deck Circles DuraPad On-Deck Circles Page 1 CALL FOR YOUR QUOTE TODAY! On-Deck Circles Page 2 Dura-Pad On-Deck Circles with Logos Page 3 EFFECTIVE: JANUARY 1, 2017 DURA PAD ON-DECK CIRCLES, FUNGO CIRCLES & COACHES

More information

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C Approved 1531;3560;1533 1,2 1531 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

FOR LESS! The Secret to a Sparkling Pool and Patio. Enjoy a crystal clear pool with ARM & HAMMER Baking Soda

FOR LESS! The Secret to a Sparkling Pool and Patio. Enjoy a crystal clear pool with ARM & HAMMER Baking Soda The Secret to a Sparkling Pool and Patio FOR LESS! Enjoy a crystal clear pool with ARM & HAMMER Baking Soda ARM & HAMMER Pool Care and Outdoor Cleaning Guide 1 Pool Care: Made Easy Crystal Clear Opening

More information

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer.

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer. (National Rule) Product Description: GLOBAL REFINISH SYSTEM 2K A-Chromatic Surfacers (D8001 White, D8005 Gray, D8007 Black) are premium quality primer surfacers suitable for the wide range of repair work

More information

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable.

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable. Approved 5580;5660;6520 1,2 5580 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24 15720;15760 1 15720 novolac epoxy VValidationDate). 1 Product description This is a two component amine cured novolac epoxy coating. It is a light coloured conductive coating with very good chemical resistance.

More information

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal.

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal. PRODUCT DESCRIPTION DP 40 CHROMATE-FREE 2K EPOXY DP40 D834 DP402 HARDENER D835 DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare

More information

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured.

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured. Product Description: GLOBAL REFINISH SYSTEM 2K Primer Surfacer/Sealer is a gray 2K primer surfacer suitable for a wide range of day-to-day repair work in the refinish collision center. Versatile, quickly

More information

Specially designed for maintenance and repair of dedicated water ballast tanks on vessels and offshore structures. Other

Specially designed for maintenance and repair of dedicated water ballast tanks on vessels and offshore structures. Other Approved 385;386;799 1,2 385 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product.

More information

Property Test/Standard Description

Property Test/Standard Description Approved 36902;36903 2 36902 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with good gloss

More information

Property Test/Standard Description

Property Test/Standard Description Approved 9211;9212 6 9211 epoxy based ^(ValidationDate) 1 Product description This is a two component epoxy primer. Pigmented with a high content of aluminium flakes giving very good waterproof protection.

More information

Property Test/Standard Description

Property Test/Standard Description Approved 612;625;627 1,2 625 epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured epoxy coating. It has a glossy finish with fair gloss retention. To be used as topcoat

More information

The Modular Pool Professionals Judged Best Modular Pool in Australia by SPASA

The Modular Pool Professionals Judged Best Modular Pool in Australia by SPASA The Modular Pool Professionals Judged Best Modular Pool in Australia by SPASA Page 1 Classic Pools Australia s Largest Modular Pool Retailer Australia s Most Awarded Modular Pool Retailer At Classic Pools

More information

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO Technical Data Sheet Application Guide 502;503 1,5 502 epoxy VValidationDate). 1 Product description This is a two component amide cured epoxy coating. It is a high performance product. It is easy to apply.

More information

PAC33 Polyurethane Primer. Mix Ratio (by volume) 4355/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0433/9000 (Thinner) 4-5 parts

PAC33 Polyurethane Primer. Mix Ratio (by volume) 4355/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0433/9000 (Thinner) 4-5 parts TECHNICAL DATA SHEET Product Description is a two component, corrosion inhibitive, polyurethane primer modified with epoxy resin. is designed for use with aerospace paint systems. Excellent corrosion resistance

More information

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas. Approved 1055;1063 1,2 1055 vinyl epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers

More information

PR143 (ACT 149) Epoxy Primer

PR143 (ACT 149) Epoxy Primer Product Description (ACT149) is a two-pack, ambient curing, chromated epoxy primer developed for the internal and external protection of aircraft. Ambient curing Excellent resistance to phosphate ester

More information

As Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l)

As Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l) SELECTION & SPECIFICATION DATA Generic Type Description Features Color Dry Film Thickness Typical Uses Solid(s) Content Coverage Rate VOC Values Dry Temp. Resistance Temperature Resistance (Immersion)

More information

44GN008A Water Reducible Type II Epoxy Primer

44GN008A Water Reducible Type II Epoxy Primer TECHNICAL DATA SHEET Product Description is a chromated, water reducible, chemically cured, two-component epoxy polyamide primer. Corrosion inhibiting Chemical and solvent resistant Resistant to immersion

More information

Epoxy Non-chromate Corrosion Inhibiting Primer. Alumigrip 4101P001 Alumigrip 4901 (CS4901) AkzoNobel Aerospace Coatings. Bombardier Hawker Beechcraft

Epoxy Non-chromate Corrosion Inhibiting Primer. Alumigrip 4101P001 Alumigrip 4901 (CS4901) AkzoNobel Aerospace Coatings. Bombardier Hawker Beechcraft Technical Data Sheet Product Group Characteristics Product Information Epoxy Non-chromate Corrosion Inhibiting Primer - is a 2 component urethane compatible, corrosion inhibiting primer formulated for

More information

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI)

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI) 16560;16561;16840 1,2 16560 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids,

More information

Pool Inspection. Your Street San Diego, California Prepared for: Your Name Prepared by: Priority Inspection Service

Pool Inspection. Your Street San Diego, California Prepared for: Your Name Prepared by: Priority Inspection Service Pool Inspection Your Street San Diego, California 92106 Prepared for: Your Name Prepared by: Page 1 of 10 Table of Contents Standards of Practice 2 Definitions 3 General Information 3 General Pool Information

More information

Your spa and the water

Your spa and the water Spa Care Guide There are numerous types of spas out there. Some spas are small, others are large, some have several jets, and others have few. Spas can be made from an assortment of materials, including

More information

TECHNICAL DATA SHEET CA7040. CA7040 HS CF Polyurethane Primer. Product Description. Components. Specifications. Surface Preparation and Pretreatment

TECHNICAL DATA SHEET CA7040. CA7040 HS CF Polyurethane Primer. Product Description. Components. Specifications. Surface Preparation and Pretreatment TECHNICAL DATA SHEET Product Description is a two pack chromate-free polyurethane primer suitable for application on aged alkyd coatings as well as on steel. Components Specifications High solids, low

More information

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product)

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product) 5 pages Revision of September 2005 DESCRIPTION two component solvent free amine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS one coat tank coating system clear version is the basis for the glassmat

More information

NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.

NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. ASTM F-718 INTERNATIONAL PAINT LLC Intershield 6GV PRODUCT DESIGNATIONS Part A: EGA65 Part B: EGA651 MIL-PRF-24667, Type I, II & V Comp G If this product is to be applied as part of a coating system, all

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested) Approved 577;576 1,2 577 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It is highly scratch resistant. Suitable

More information

GWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST

GWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST GWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST Pool Name: Address: Contractor: Phone: Number of Pools Applied for: GENERAL INFORMATION Plan review paid Pool Piping plan stamped by Design Professional.

More information

Mix ratio (by volume): 44GN011 (base component) 44GN011CAT (catalyst component) Reducer (Distilled or Deionized water) MCS0200 Grade E

Mix ratio (by volume): 44GN011 (base component) 44GN011CAT (catalyst component) Reducer (Distilled or Deionized water) MCS0200 Grade E TECHNICAL DATA SHEET Product Description is a water reducible, chemically cured, two-component epoxy polyamide primer. is formulated to protect the structural interior of aircraft from corrosion. Corrosion

More information

Lincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC Phone: Fax:

Lincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC Phone: Fax: Lincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC 28092 Phone: 704-736-8426 Fax: 704-736-8427 APPLICATION FOR APPROVAL TO CONSTRUCT OR RENOVATE A PUBLIC SWIMMING

More information