NATIONAL PAINT SYSTEMS SPECIFIER

Size: px
Start display at page:

Download "NATIONAL PAINT SYSTEMS SPECIFIER"

Transcription

1 CONCRETE PLASTER NATIONAL S SPECIFIER () EMULSION BASED (SMOOTH FINISH) - NATIONAL PVA SEALER MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL PVA WHITE MASONRY - NATIONAL AQUA SILOXANE - NATIONAL STUCCO FILLER ( ONLY) - NATIONAL SHIELD FILLER - NATIONAL PLASTIC EMULSION / ACRYYL EMULSION I ( ONLY) - NATIONAL ACRYLIC SUPER EMULSION ( ONLY) - NATIONAL MATT EMULSION NICE EMULSION - NATIONAL SUPER MATT EMULSION - NATIONAL EGGSHELL SILKY / MATT WEATHER RESIST - NATIONAL ACRYL EMULSION II ACRYLIC EGGSHELL GOLD - NATIONAL GLOSS EMULSION SHIELD TOPCOAT GLOSS/MATT - NATIONAL DEPENDEM EGGSHELL ANTI FUNGAL EMULSION - NATIONAL SILICON EMULSION PAINT INSECT RESIST (WB) () EMULSION BASED (TEXTURED FINISH) - NATIONAL PVA SEALER MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL TEX NATIONAL AQUA SILOXANE - NATIONAL TEX HEAVY TEXTURE - NATIONAL TEX (W.O.M.C.) MEDIUM TEXTURE - NATIONAL SWISS SANDTEX MEDIUM TEXTURE - NATIONAL SUPER FINETEX LIGHT/MEDIUM/HEAVY TEXTURE - NATIONAL MINITEX LIGHT TEXTURE - NATIONAL GRAFFIO DÉCOR/SYNPLAST (TEXTURED COATING) - NATIONAL SHIELD ULTRASILK/FINESILK/TEX SILK - NATIONAL SHIELD LONGLIFE TRADITIONAL TEX/ANTIQUE TEX/CLASSIC TEX Rev. 05/0 Page /6

2 CONCRETE PLASTER CONCRETE PLASTER (3) (4) NATIONAL S SPECIFIER NATIONAL FIBRE FINISH - NATIONAL PVA SEALER MASONRY - NATIONAL PVA WHITE MASONRY - NATIONAL ACRYLIC (W.B.) AQUA SILOXANE - NATIONAL WHITE GLUE - NATIONAL FIBRE - NATIONAL MATT EMULSION SUPER MATT EMULSION - NATIONAL EGGSHELL EMULSION SILKY/MATT ] - NATIONAL GLOSS EMULSION SHIELD TOPCOAT SILK /GLOSS - NATIONAL ACRYLIC ROCK TOPCOAT I) NATIONAL WALL ROCK (EPOXY BASED) - NATIONAL GUARD CLEAR/WHITE - NATIONAL INTERGUARD H.B. (SPRAY TEXTURE) - NATIONALTHANE TOPCOAT / NATIONAL POLYURETHANE TOPCOAT I NATIONAL TILE (WATER BASED) - NATIONAL PVA WHITE MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL TEX PRRIMER - NATIONAL NUTEX (SPRAY TEXTURE) - NATIONALTHANE TOPCOAT / NATIONAL POLYURETHANE TOPCOAT NATIONAL ACRYLIC ROCK - NATIONAL PVA WHITE MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL TEX - NATIONAL NUTEX (SPRAY TEXTURE) - NATIONAL ACRYLIC ROCK TOPCOAT Rev. 05/0 Page /6

3 NATIONAL S SPECIFIER BATHROOMS KITCHENS (4) IV) (5) I) NATIONAL ECO SYSTEM - NATIONAL PVA WHITE MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL TEX - NATIONAL NUTEX (SPRAY TEXTURE) - NATIONAL WEATHER RESIST ACRYLIC WEATHER RESIST - NATIONAL GLOSS EMULSION / SHIELD TOPCOAT (SILK/GLOSS) ALKYD BASED - NATIONAL PVA SEALER MASONRY - NATIONAL PVA WHITE MASONRY - NATIONAL STUCCO FILLER - NATIONAL SYNTHETIC ENAMEL GLOSS I / GLOSS II / ECO ENAMEL - NATIONAL FLAT/MATT SYNTHETIC ENAMEL ( ONLY) (6) (6) ACRYLIC (SOLVENT BASED) - NATIONAL PVA SEALER MASONRY - NATIONAL ACRYLIC (W.B.) - NATIONAL PVA WHITE MASONRY - NATIONAL STUCCO FILLER - NATIONAL MATT EMULSION - NATIONAL ACRYLIC ROCK TOPCOAT I) ALKYD BASED (DOORS FRAMES) - NATIONAL - NATIONAL STUCCO FILLER - NATIONAL SYNTHETIC ENAMEL / GLOSS / SEMI-GLOSS- MATT - NATIONAL ECO ENAMEL - NATIONAL FLAT/MATT SYNTHETIC ENAMEL ( ONLY) ALKYD VARNISH - NATIONAL SYNTHETIC VARNISH (GLOSS/MATT) - NATIONAL SYNTHETIC VARNISH (GLOSS/MATT) (Diluted) Rev. 05/0 Page 3/6

4 NATIONAL S SPECIFIER I IV) STAIN (ALKYD/OIL BASED) - NATIONAL STAIN (ALKYD/OIL BASED) - NATIONAL SYNTHETIC VARNISH N.C. STAIN - NATIONAL N.C. STAIN - NATIONAL N.C. SANDING SEALER (As REQUIRED) - NATIONAL N.C. LACQUER CLEAR (GLOSS/MATT) V) N.C. LACQUER (CLEAR) - NATIONAL N.C. SANDING SEALER - NATIONAL N.C. AUTO LACQUER CLEAR 3 VI) N.C. LACQUER SYSTEM - NATIONAL N.C. R - NATIONAL N.C. PUTTY - NATIONAL N.C. R - NATIONAL N.C. LACQUER TOPCOAT - NATIONAL N.C. LACQUER CLEAR FLOORS V (7) I) NATIONAL POLYURETHANE SYSTEM - NATIONAL POLYURETHANE SANDING SEALER (4:) - NATIONAL POLYURETHANE CLEAR (4:) EPOXY (SOLVENT BASED) - NATIONAL GUARD (CLEAR) - NATIONAL GUARD EPOXY FLOORING TOPCOAT - NATIONAL SILICA AGGREGATES AFTER FIRST COAT (IF REQUIRED) SOLVENT FREE EPOXY - NATIONAL GUARD - NATIONAL GUARD EPOXY FLOORING S.F. - NATIONAL SILICA AGGREGATES (IF REQUIRED) - NATIONAL GUARD EPOXY FLOORING S.F. (COLOUR) - (NATIONAL POLYURETHANE H.B. TWO ) 3 I HEAVY DUTY EPOXY FLOOR SCREED ( 0 MM) - NATIONAL GUARD EPOXY FLOORING S.F. AS - NATIONAL GUARD EPOXY FLOORING S.F. WITH SCREED - NATIONAL GUARD EPOXY FLOORING S.F. AS TOPCOAT (NATIONAL POLYURETHANE H.B. TWO ) Rev. 05/0 Page 4/6

5 NATIONAL S SPECIFIER STRUCTURAL STEEL (8) I) ALKYD BASED - NATIONAL RED OXIDE - NATIONAL SYNTHETIC ENAMEL GLOSS I - NATIONAL SYNTHETIC ENAMEL GLOSS II EPOXY SYSTEM - NATIONAL GUARD EPOXY RED OXIDE - NATIONAL GUARD ZINC PHOSPHATE EPOXY - NATIONAL GUARD UNDERCOAT H.B. - NATIONAL GUARD TOPCOAT No. of Coats x DFT/Coat (Microns) x 35 x x 5 40 x 5 40 x 50 x 50 x00 5 x 50 Total DFT (Microns) (Five Coats) (Four coats) GALVANIZED NON- FERROUS Metal (9) NOTE: Where colour stability is required instead of National Guard Topcoat use Nationalthane / National Polyurethane to achieve microns thickness in a single coat. ALKYD BASED - NATIONAL WASH - NATIONAL ZINC CHROMATE - NATIONAL SYNTHETIC ENAMEL GLOSS I OR II - NATIONAL ECO ENAMEL x (5-8) x 50 x x 40 x (Four coats) Rev. 05/0 Page 5/6

6 NATIONAL S SPECIFIER (0) NATIONAL FIRE RETARDANT PAINT CONCRET E PLASTER () - NATIONAL FIRE RETARDANT PAINT (AS ) - NATIONAL FIRE RETARDANT PAINT NATIONAL ANTICARBONATION SYSTEM (WATER BASED) - NATIONAL ACRYLIC (W.B.) AQUA SILOXANE - NATIONAL STUCCO FILLER () - NATIONAL SHIELD FILLER - NATIONAL PROTECT SEAL / () NATIONAL ANTICARBONATION SYSTEM (SOLVENT BASED) - NATIONAL PENETRATING SILOXANE - NATIONAL ALIPHATIC ACRYLIC H.B. (3) NATIONAL INTUMESCENT PAINT - NATIONAL GUARD ZINC PHOSPHATE EPOXY - NATIONAL GUARD ZINC RICH EPOXY - NATIONAL INTUMESCENT PAINT 4 5 Rev. 05/0 Page 6/6

PAINT APPROVED BRAND LIST AS OF 03/20/2012

PAINT APPROVED BRAND LIST AS OF 03/20/2012 MANUFACTURER PRODUCT NAME VOC CONTENT (g/l) LEED 1 VOC MAXIMUM LIMIT(g/L) RECOMMENDED PRIMER INITIAL FINAL EXPOSURE EXPOSURE DATE DATE EXPOSURE RESULTS DATE CERTIFIED EXPIRATION DATE STATUS SPECIFICATION

More information

PAINT APPROVED BRAND LIST AS OF 08/20/2012 Page 1 of 5

PAINT APPROVED BRAND LIST AS OF 08/20/2012 Page 1 of 5 PAINT APPROVED BRAND LIST AS OF 08/20/2012 Page 1 of 5 MANUFACTURER PRODUCT NAME VOC CONTENT (g/l) LEED 1 VOC MAXIMUM LIMIT(g/L) RECOMMENDED PRIMER INITIAL FINAL EXPOSURE EXPOSURE DATE DATE EXPOSURE RESULTS

More information

SHOPLINE MATERIAL SAFETY DATA SHEET PACKAGE

SHOPLINE MATERIAL SAFETY DATA SHEET PACKAGE J01 J02 J03 J04 J05 J06 J07 J08 J105 J11 J12 J128 J13 J136 J14 J143 J15 J16 J17 J179 J18 J19 J20 J21 J22 J23 J24 J25 J26 J27 J28 J29 J33 J34 J35 J41 J42 Silver Diamonds Gold Diamonds Russet Diamonds Blue

More information

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal.

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal. PRODUCT DESCRIPTION DP 40 CHROMATE-FREE 2K EPOXY DP40 D834 DP402 HARDENER D835 DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare

More information

Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck

Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck Pool & Fountain Paints & Deck Coatings Guide The paint system for every residential or commercial pool, fountain and deck EPOXY EP Epoxy Pool Paint EP Hi-Build Epoxy Pool Paint This superior high build

More information

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy SELECTION & SPECIFICATION DATA Generic Type Description Features Cycloaliphatic Amine Epoxy High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over

More information

GLOBAL MATERIAL SAFETY DATA SHEET PACKAGE

GLOBAL MATERIAL SAFETY DATA SHEET PACKAGE D740 D741 D744 D746 D747 D748 D749 D750 D751 D752 D753 D754 D756 D757 D759 D760 D761 D762 D763 D764 D765 D767 D768 D769 D770 D771 D772 D776 D777 D778 D779 D780 D789 D790 D792 D793 D794 Black Bright Blue

More information

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives)

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives) SELECTION & SPECIFICATION DATA Generic Type Description Features Epoxy Polyamide Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can

More information

Self-priming. May be applied over most generic types of coatings.

Self-priming. May be applied over most generic types of coatings. SELECTION & SPECIFICATION DATA Generic Type Description Features Polymeric epoxy amine. Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical) Approved 462;463;9880;464;1500;7021 1,2 462 epoxy ^(ValidationDate) 1 Product description This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an antiskid coating.

More information

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required. Other 462;463;9880;464;1500;7021 1,2 462 epoxy VValidationDate). 1 Product description This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an anti-skid coating.

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested) Approved 34802;34803;36922;37662 1,2 34802 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build

More information

TECHNICAL DATA SHEET INNOPUR COURT AC-200 ( RESURFACER ) WATERBORNE REPAIR AND ADHESION MATERIAL FOR ASPHALT AND CONCRETE

TECHNICAL DATA SHEET INNOPUR COURT AC-200 ( RESURFACER ) WATERBORNE REPAIR AND ADHESION MATERIAL FOR ASPHALT AND CONCRETE INNOPUR COURT AC-200 ( RESURFACER ) TECHNICAL DATA SHEET WATERBORNE REPAIR AND ADHESION MATERIAL FOR ASPHALT AND CONCRETE DEFINITION Acrylic emulsion based, waterborne, flexible and providing good adhesion

More information

Seamless Acoustical Plaster Solutions

Seamless Acoustical Plaster Solutions Seamless Acoustical Plaster Solutions A seamless acoustical plaster solution The Fade system is a high quality plastering solution that absorbs unwanted noise in a wide range of environments. As an acoustic

More information

FILE - RE CAULKING WINDOWS AND DOORS EBOOK

FILE - RE CAULKING WINDOWS AND DOORS EBOOK 23 June, 2018 FILE - RE CAULKING WINDOWS AND DOORS EBOOK Document Filetype: PDF 492.45 KB 0 FILE - RE CAULKING WINDOWS AND DOORS EBOOK How Often Do I Need to Caulk Doors, Windows. The houses in our area

More information

OMNI MATERIAL SAFETY DATA SHEET PACKAGE

OMNI MATERIAL SAFETY DATA SHEET PACKAGE JX995 JX996 M102 M103 M104 M105 M106 M108 M109 M110 M111 M112NF M113 M114 M115 M116NF M117 M118 M119 M120 M121 M122 M123 M124 M125 M126 M127 M128 M129 M130 M131 M132 M133 M134NF M135 M141 M142 Drier Mixing

More information

Safety Data Sheet. according to Regulation (EC) No. 1907/2006. WICKES Interior Matt-Satin Emulsions

Safety Data Sheet. according to Regulation (EC) No. 1907/2006. WICKES Interior Matt-Satin Emulsions Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifier Further trade names Trade Matt Paint for new Plaster (W701141) Trade Flat Matt BW (W701148)

More information

Product Information D822

Product Information D822 AUTOMOTIVE REFINISH Product Information D822 Corrosion Resistant Primer Sealer Product Description D822 Corrosion Resistant Primer is a two-pack sealer for use under Global topcoat colours. It must be

More information

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI)

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI) 16560;16561;16840 1,2 16560 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids,

More information

Product Information D822

Product Information D822 GLOBAL REFINISH SYSTEM AUTOMOTIVE REFINISH Product Information D822 Corrosion Resistant Primer Product Description D822 Corrosion Resistant Primer is a two-pack primer for use under Global topcoat colours.

More information

Imron Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality)

Imron Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality) Imron 2.1 + Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality) GENERAL DESCRIPTION A high solids aliphatic polyurethane enamel available in multiple gloss levels. It may be applied by brush, roll

More information

smart paints Smart Pure Gold SPPG 30 gm, 100 gm, 300gm and 1 kg

smart paints Smart Pure Gold SPPG 30 gm, 100 gm, 300gm and 1 kg SPPG 30 gm, 100 gm, 300gm and 1 kg Description Smart 24K Pure Gold is a premium quality, 100% full acrylic water-based emulsion paint formulated with premium lustrous pigment. It is a quick dry high performance

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C Approved 1531;3560;1533 1,2 1531 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

Binks Model 21 (Brass Body) Automatic Spray Gun General Arrangement Diagram and Hook-Up. Side Port Control. Fluid. Cylinder Air Fluid.

Binks Model 21 (Brass Body) Automatic Spray Gun General Arrangement Diagram and Hook-Up. Side Port Control. Fluid. Cylinder Air Fluid. Binks Model 21 Automatic Spray Gun (Brass Body) 6220-XXXX-X Binks Model 21 (Brass Body) Automatic Spray Gun General Arrangement Diagram and Hook-Up Atomizing Air Cylinder Air Shut-Off Cocks To Supply Atomizing

More information

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199 uses specially selected raw materials, showing excellent weathering and abrasion r resistance to aromatic solvents splash, aliphatic and very polluted atmospheres, especially where there gases that f solutions.

More information

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured.

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured. Product Description: GLOBAL REFINISH SYSTEM 2K Primer Surfacer/Sealer is a gray 2K primer surfacer suitable for a wide range of day-to-day repair work in the refinish collision center. Versatile, quickly

More information

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating DESCRIPTION Two-component, fast dry multi-purpose epoxy coating PRINCIPAL CHARACTERISTICS Multi-purpose high build epoxy Application over a wide range of surface temperatures Suitable for immersion in

More information

TECHNICAL DATA SHEET EC75. EC75 Epoxy Topcoat. Product Description. Components. Specifications

TECHNICAL DATA SHEET EC75. EC75 Epoxy Topcoat. Product Description. Components. Specifications TECHNICAL DATA SHEET Product Description is a two pack, epoxy topcoat designed to provide protection of internal structures of aircraft and land based equipment. Excellent adhesion properties Applicable

More information

Page Uni-Solvent -Medium Coating Component Clear; Color; Multi-color; Primer; Single

Page Uni-Solvent -Medium Coating Component Clear; Color; Multi-color; Primer; Single 155 Sunprep Cleaning Solvent Solvent Cleaner 6.43 770 6.43 770 6.43 770 100.0 0.0 0.0 0.0 0.0 161 Basecoat Stabilizer Fast Coating Component Color Coating 7.05 845 6.91 827 6.90 827 97.9 0.0 0.0 0.0 0.0

More information

Property Test/Standard Description

Property Test/Standard Description Approved 18400;18360 1,2 18400 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a surface tolerant, high solids, high build product. Specially designed

More information

Seamless Acoustical Plaster Solutions

Seamless Acoustical Plaster Solutions Seamless Acoustical Plaster Solutions A seamless acoustical plaster solution The Fade system is a high quality plastering solution that absorbs unwanted noise in a wide range of environments. As an acoustic

More information

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description Product Data Sheet August 2006 FOR PROFESSIONAL USE ONLY Product Primecoat P565-625 Description P565-625 Primecoat - Greyish green P275-124 Standard Activator P275-232 Slow Activator P275-292 Extra Slow

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical) Approved 528;529 1,2 528 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially

More information

Date of issue: 20 April 2018 Page: 1/6

Date of issue: 20 April 2018 Page: 1/6 Approved 16560;16561;16840 1,2 16560 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high

More information

Property Test/Standard Description

Property Test/Standard Description Approved 36902;36903 2 36902 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with good gloss

More information

Brushes & Rollers. Brushes & Rollers. Exclusively Supporting the Independent Sector

Brushes & Rollers. Brushes & Rollers. Exclusively Supporting the Independent Sector Rollers Range Exclusively Supporting the Independent Sector Marshall Ltd Hargreaves House, Plumbe Street, Burnley BB11 3AB T:+44 (0) 1282 705731 E: sales@mako-uk.com W: www.marshallbrushes.co.uk Foam Roller

More information

Toplus High Gloss TPHG 1 & 5 Litre

Toplus High Gloss TPHG 1 & 5 Litre Toplus High Gloss TPHG 1 & 5 Litre Description Toplus Gloss is a general purpose solvent based enamel gloss paint. Suitable for use on all types of wood and metal surfaces. Recommended for use where economy

More information

TECHNICAL DATA SHEET CA7040. CA7040 HS CF Polyurethane Primer. Product Description. Components. Specifications. Surface Preparation and Pretreatment

TECHNICAL DATA SHEET CA7040. CA7040 HS CF Polyurethane Primer. Product Description. Components. Specifications. Surface Preparation and Pretreatment TECHNICAL DATA SHEET Product Description is a two pack chromate-free polyurethane primer suitable for application on aged alkyd coatings as well as on steel. Components Specifications High solids, low

More information

Marking & Identification.

Marking & Identification. Marking & Identification. Section Contents Artline Markers 134 Jumbo Markers 134 Scribe Markers 135, 137 Ballmarker 136 Refillable Markers 136 Zinc & Silver Gal 136 Paint Markers 137 Stencil Sets 138 Stencilling

More information

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

Property Test/Standard Description

Property Test/Standard Description Approved 2080;2081 1 2080 epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured epoxy coating. It is a high solids, high build product. Designed as a mid coat in systems

More information

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer.

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer. (National Rule) Product Description: GLOBAL REFINISH SYSTEM 2K A-Chromatic Surfacers (D8001 White, D8005 Gray, D8007 Black) are premium quality primer surfacers suitable for the wide range of repair work

More information

Co onstruction. Evaluation of substrates & Substrate preparation. Sika Australia

Co onstruction. Evaluation of substrates & Substrate preparation. Sika Australia Evaluation of substrates & Substrate preparation Evaluation of Substrates Substrate Quality The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm 2 ) with a minimum

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24 15720;15760 1 15720 novolac epoxy VValidationDate). 1 Product description This is a two component amine cured novolac epoxy coating. It is a light coloured conductive coating with very good chemical resistance.

More information

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas. Approved 1055;1063 1,2 1055 vinyl epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers

More information

Imron 2.1 HG + Polyurethane High Gloss Topcoat

Imron 2.1 HG + Polyurethane High Gloss Topcoat Imron 2.1 HG + Polyurethane High Gloss Topcoat Product Data Sheet (Mix Quality QH) Description: DuPont Imron 2.1 HG + is the new generation of Imron technology. Based upon unique DuPont formulations and

More information

Including the new. series. HTC Pocket Grinding Guide.

Including the new. series. HTC Pocket Grinding Guide. Including the new series HTC Pocket Grinding Guide HTC Superfloor Platinum The intention of the first grinding step is to create a good end result. All subsequent grinding steps - mu Resin/plastic bonded

More information

Advantages of ALEXIT BladeRep

Advantages of ALEXIT BladeRep Advantages of ALEXIT BladeRep Product can be used individually or as a complete system User-friendly packaging for repairs of any size Easy mixing and application Specifically designed for blade repair

More information

Bike-Shell Model 301P

Bike-Shell Model 301P Bike-Shell Model 301P NEW design, one piece FRP Composite bike locker NO ASSEMBLY required Specify the 300 Series lockers for the highest customer satisfaction from the no-assembly ready-touse delivery

More information

W00 - W999 OCTOBASE ECO PLUS SYSTEM

W00 - W999 OCTOBASE ECO PLUS SYSTEM W00 W999 OCTOBASE ECO PLUS SYSTEM GENERAL INFORMATION W00 W999 Octobase Eco Plus System is a waterbased basecoat layer in a clearoverbase system. Suitable for passenger cars, touring cars and commercial

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 9440;9441 1,2 9440 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

PR219 Epoxy Primer Undercoat

PR219 Epoxy Primer Undercoat TECHNICAL DATA SHEET Product Description Components is a two pack, zinc chromated epoxy primer designed to provide anti-corrosive protection to military vehicles and equipment. Anti-corrosive protection

More information

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product)

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product) 5 pages Revision of September 2005 DESCRIPTION two component solvent free amine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS one coat tank coating system clear version is the basis for the glassmat

More information

PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET

PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET Check local VOC DESCRIPTION Pro-Tex Truckbed Liner is a professional, two component, urethane liner system that provides a hard, durable finish and superior

More information

DFT in excess of 8.0 mils per coat is not recommended.

DFT in excess of 8.0 mils per coat is not recommended. SELECTION & SPECIFICATION DATA Generic Type Description Features Color Gloss Primer Dry Film Thickness Cross-linked epoxy polymeric amine An all-purpose immersion-grade epoxy that has a variety of attributes

More information

There is no place like PEACE RHYTHM

There is no place like PEACE RHYTHM There is no place like Rhythm is a ow of harmony, a poetry in motion, a movement of steadiness, a melody to perfection and a pattern or composition to eternity. A Peace Projects aims at similar environment

More information

smart paints Smart High Gloss SPHG 1 Litre & 5 Litres

smart paints Smart High Gloss SPHG 1 Litre & 5 Litres SPHG 1 Litre & 5 Litres Description is a premium quality high gloss paint, suitable for use on all types of wood and metal surfaces. Based on full alkyd, it is a fungus resistant, high gloss architectural

More information

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable.

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable. Approved 5580;5660;6520 1,2 5580 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially

More information

Safety Data Sheet. according to Regulation (EC) No. 1907/2006. WICKES Exterior Masonry Paint

Safety Data Sheet. according to Regulation (EC) No. 1907/2006. WICKES Exterior Masonry Paint Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifier Further trade names Extra Tough Masonry Textured (W709367) Extra Tough Masonry Smooth (W701710)

More information

Parts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE

Parts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE COMMERCIAL CLEANING EQUIPMENT MODELS: Parts Manual (EN) 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE Read the Operators Manual before using the machine. Read the Safety Messages before servicing machine.

More information

FENCING SYSTEM SOLUTIONS

FENCING SYSTEM SOLUTIONS FENCING SYSTEM SOLUTIONS ABOUT US TE-FENCE is a trademark of TMEC INTERNATIONAL Group international based in Istanbul, Turkey. Our company specialized in designing, manufacturing and installation of fencing

More information

Laminating. POLYESTER MASTICS 48 Polyester mastic PLASTOBOAT...48 Polyester mastic with fiberglass FIBROBOAT...48 Wood mastic PLASTOBOIS...

Laminating. POLYESTER MASTICS 48 Polyester mastic PLASTOBOAT...48 Polyester mastic with fiberglass FIBROBOAT...48 Wood mastic PLASTOBOIS... POLYESTER RESINS 47 Polyester kit..................................................47 Polyester resin pre accelerated...................................47 Polyester resin non accelerated..................................47

More information

BXUV.X632 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263

BXUV.X632 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263 BXUV.X632 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements

More information

Imron 2.1 PR Polyurethane Primer

Imron 2.1 PR Polyurethane Primer Imron 2.1 PR Polyurethane Primer GENERAL DESCRIPTION A two-package, VOC conforming (2.1 lbs/gal) low HAPS primer based on Axalta polyurethane technology. The resulting primer is designed to deliver a smooth

More information

Surf Clear EVO Epoxy system for surfboards

Surf Clear EVO Epoxy system for surfboards Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,

More information

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above)

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above) DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear IDENTITY CODE DIAMOND COAT PLUS DCU 2035 Hardener Medium Temperature DCX 8 Hot Temperature/Force Dry DCX 9 General Purpose DCX 61 DCU 2035 DT Reducers

More information

Desofill CA8620 HS PU Sanding Surfacer. CA8000B (Activator) CA8000C or CA8000C2 (Thinner)

Desofill CA8620 HS PU Sanding Surfacer. CA8000B (Activator) CA8000C or CA8000C2 (Thinner) TECHNICAL DATA SHEET Product Description Desofill is a chromate free polyurethane sanding surfacer designed to improve the appearance of aluminium, fibre glass and composites. can be used as a sanding

More information

PART II Building the MDV-1

PART II Building the MDV-1 21 PART II Building the MDV-1 The MDV-1 is a simple, easily driven, seaworthy boat intended for both rowing and power propulsion. Its general-purpose design is suitable for inshore waters around the world.

More information

BXUV.D935 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263

BXUV.D935 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263 BXUV.D935 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements

More information

As Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l)

As Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l) SELECTION & SPECIFICATION DATA Generic Type Description Features Color Dry Film Thickness Typical Uses Solid(s) Content Coverage Rate VOC Values Dry Temp. Resistance Temperature Resistance (Immersion)

More information

Technical Data Megacote

Technical Data Megacote Technical Data Megacote Product description Megacote is a fast-curing abrasion resistant high solids two-component epoxy anticorrosive coating that will bond to a wide variety of substrates. Recommended

More information

MESA PAINT MANUFACTURING PTE LTD No. 3, FOURTH LOK YANG ROAD, SINGAPORE Co. Reg. No M Tel: Fax:

MESA PAINT MANUFACTURING PTE LTD No. 3, FOURTH LOK YANG ROAD, SINGAPORE Co. Reg. No M Tel: Fax: MESA SUPER MESALITE EMULSION Product Code: MSM 21XXX Mesa Super Mesalite Emulsion is an economical decorative wall finish with algae and fungus resistant. It is suitable for all normal interior masonry

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 31462;9441 1,2 31462 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 36 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 36 C Approved 635 1,2 635 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. It has a glossy finish with good gloss retention. To be used as topcoat in atmospheric

More information

PRODUCT SAFETY DATA SHEET (In accordance with Annex II of REACH regulation)

PRODUCT SAFETY DATA SHEET (In accordance with Annex II of REACH regulation) PRODUCT SAFETY DATA SHEET (In accordance with Annex II of REACH regulation) 1 Identification of the substance/preparation and of the company/undertaking 1.1 Identification of the substance or preparation

More information

Construction Chapters Index

Construction Chapters Index Construction Chapters Index 9 7 8 Chapters Index c. c. c. c. c. c. c7. c8. c9. c0. c. c. c. c. c. c. c7. Balsa Wood Skeleton Strip Planking Hull Fairing Keel Bulb Mould Lead Bulb Casting Keel Construction

More information

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO Technical Data Sheet Application Guide Approved 490;491;1516 1,5 490 epoxy VValidationDate). 1 Product description This is a three component polyamide cured solvent free epoxy screed. It is a robust high

More information

Sports Synthetic Court

Sports Synthetic Court Sports Synthetic Court 1 Badminton Synthetic Court GAMA Badminton court is rectangular Surfaces and with shock absorption of 56.9% and with thickness of 3 mm divided into halves by a net. Courts are usually

More information

How to Weather and Ballast Track

How to Weather and Ballast Track How to Weather and Ballast Track Presented by Jeffrey Jarr Weathering Track What is a train track comprised of? Weathering Track What does real weathered track look like? Weathering Track What does real

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested) Approved 577;576 1,2 577 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It is highly scratch resistant. Suitable

More information

EC96 HS Epoxy Topcoat. 1 part. ACT197 (Activator) near matt. 1 part

EC96 HS Epoxy Topcoat. 1 part. ACT197 (Activator) near matt. 1 part HS Epoxy Topcoat TECHNICAL DATA SHEET Product Description Epoxy Finish possesses excellent adhesion and high chemical resistance. This combination makes it an ideal topcoat to enhance the protection of

More information

Mix ratio (by volume): CA8110/XXXX (base component) CA8110D (activator component) G Kit Yield

Mix ratio (by volume): CA8110/XXXX (base component) CA8110D (activator component) G Kit Yield TECHNICAL DATA SHEET Product Description Desothane HS /CA8120 anti-chafe topcoats are high solids, Teflon filled polyurethane coatings. They are used on surfaces where low friction, abrasion resistance,

More information

Property Test/Standard Description

Property Test/Standard Description Approved 35042;33404 2 35042 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It provides superior resistance

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS SpectroFlex Surfacer 5400. Permasolid HS SpectroFlex Surfacer 5400 is an innovative coloured 2K HS surfacer system based on new generation acrylic resins. The system

More information

Interzinc 22 Application Guidelines

Interzinc 22 Application Guidelines Interzinc 22 Page 1 of 10 Interzinc 22 Application Guidelines Prepared by: M&PC Technical Operations International Paint Ltd. www.international-pc.com The information in this guideline is not intended

More information

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of

More information

two component solvent free amine cured phenolic epoxy coating

two component solvent free amine cured phenolic epoxy coating 6 pages Revision of February 2006 DESCRIPTION two component solvent free amine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS one coat tank coating system clear version is the basis for the glassmat

More information

Mix ratio (by volume for base and activator): CA8022/B7022 (base component) CA8020DX (activator component) 920K058 (pumice component)

Mix ratio (by volume for base and activator): CA8022/B7022 (base component) CA8020DX (activator component) 920K058 (pumice component) TECHNICAL DATA SHEET Product Description Desothane HS walkway coating is a high solids, anti-skid polyurethane topcoat. It is used on the upper wings of aircraft to prevent passengers from slipping during

More information

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications GENERAL DESCRIPTION Imron Industrial Strength Clear, 9C01, is a high gloss, high performance clear coat designed to

More information

Professional Finishing. TempSpray. Airless heated hose systems. Easy to operate. Perfect surfaces. Innovative. Quality Offensive!

Professional Finishing. TempSpray. Airless heated hose systems. Easy to operate. Perfect surfaces. Innovative. Quality Offensive! Professional Finishing TempSpray Airless heated hose systems Easy to operate Perfect surfaces Innovative Quality Offensive! Professional Finishing Heating instead of diluting - How it works All heating

More information

1800CPB2 Service Regulators

1800CPB2 Service Regulators SB 8520.5 1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................ 4-6 1-1/4" Models,

More information

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks: Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level

More information

Mix ratio (by volume) for gloss colors: CA8271/XXXXX (base component) Mix ratio (by volume) for semi-gloss colors:

Mix ratio (by volume) for gloss colors: CA8271/XXXXX (base component) Mix ratio (by volume) for semi-gloss colors: Desothane HS Military and Defense Topcoats TECHNICAL DATA SHEET Product Description Desothane HS military and defense topcoats are high solids polyurethanes used to protect the exterior of aircraft. These

More information

FP McCann Tunnels and Shafts 1

FP McCann Tunnels and Shafts 1 FP M c Cann FP McCann Tunnels and Shafts 1 The McCann range of shaft and tunnel products have been developed to meet the requirements of the latest industry standards which include the British Tunnelling

More information

Technical Data Sheet PART A & PART B

Technical Data Sheet PART A & PART B Technical Data Sheet PART A & PART B NuPool Epoxy 2 Pack System PART A Product Description NuPool Epoxy Features: NuPool Epoxy is an isocyanate free, high build gloss epoxy coating that is impervious to

More information

TROWELS/FLOATS/HAWKS HOPPER GUN / SPLATTER GUN TILING TOOLS ELECTRIC MIXER & PADDLES. Plaster & Render Tools, Electric Mixers, Paddles.

TROWELS/FLOATS/HAWKS HOPPER GUN / SPLATTER GUN TILING TOOLS ELECTRIC MIXER & PADDLES. Plaster & Render Tools, Electric Mixers, Paddles. TROWELS/FLOATS/HAWKS HOPPER GUN / SPLATTER GUN TILING TOOLS ELECTRIC MIXER & PADDLES PLASTER/CEMENT TROWELS - STAINLESS STEEL Finest Grade Stainless Steel Cross Ground Blades Fully Riveted through the

More information

Property Test/Standard Description

Property Test/Standard Description Approved 612;625;627 1,2 625 epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured epoxy coating. It has a glossy finish with fair gloss retention. To be used as topcoat

More information

Smooth Matt Finish. A wide range of colours. Please refer Smart Cool Weather Colour Card. Theoritical Coverage : m2/litre Drying Time : :

Smooth Matt Finish. A wide range of colours. Please refer Smart Cool Weather Colour Card. Theoritical Coverage : m2/litre Drying Time : : SPCW 1 Litre, 5 Litres, 15 Litres & 20 Litres Description Paint is a premium quality, 100% full acrylic based emulsion paint. It is specially formulated for the tropics with excellent weathering properties,

More information

PAC33NV Polyurethane Primer. Mix Ratio (by volume) 4359/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0477/9000 (Thinner) 3 parts

PAC33NV Polyurethane Primer. Mix Ratio (by volume) 4359/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0477/9000 (Thinner) 3 parts Polyurethane Primer TECHNICAL DATA SHEET Product Description PU Primer is a two component, highly flexible, fast drying primer from the PU66 system, designed for use on internal fuel tank surfaces and

More information

October 2004 replaces December

October 2004 replaces December Carboguard 1209 Selection & Specification Data Substrates & Surface Preparation Generic Type Description Features Polyamido-Amine Epoxy Dense, highly impermeable glass flake-filled coating used for protecting

More information