November 10, ,112 words 3 Figures

Transcription

1 0 0 0 Pedestrian Infrastructure on the Public Right-of-Way: Aging Pedestrians and Prioritizing Sidewalk Hazards Using the Ultra Light Inertial Profiler (ULIP) Corresponding Author Mr. Arfaraz Khambatta, CASp Director, Access Consulting Sally Swanson Architects 0 Sansome St., Suite 00 San Francisco, California Phone: 0 Fax: 0 ssa@swanarch.com Mr. Franz Loewenherz City of Bellevue 0 0th Ave. NE P.O. Box 00 Bellevue, Washington 00 Phone: FLoewenherz@bellevuewa.gov November, 0, words Figures

2 Khambatta & Loewenherz ABSTRACT Walkability is an important criterion of livable communities and has been tied to health and social benefits. New planning concepts reducing car dependency will increase senior resident s time on sidewalks. While cities are required by ADA laws to reduce sidewalk hazards, the time and cost of gathering exact data has been a deterrent. The typical sampling of elements such as sidewalks, curb ramps, pedestrian crossings, and obstructions do not provide an adequate understanding of the hazards and barriers throughout a district. In particular, prioritizing the most critical sidewalk hazard locations for city maintenance is not organized and tied to other street maintenance plans. A new and innovative tool, the ULIP, developed through the Federal Highway Administration, allows 0% sidewalk inventory and converts the data into a city s GIS system. Knowing exactly the location and severity of sidewalk barriers increases the likelihood that all hazards are addressed, reducing the potential for falls and accidents. This innovative technology is now being tried in five cities. In the future, time and cost savings could be accrued, treating ADA code requirements on a regional rather that a city scale. As cities plan for greater sidewalk use by a new generation of aging residents, they can reduce potential accidents and the possibility of increased litigation.

3 Khambatta & Loewenherz WALKABLE COMMUNITIES Livable communities are walkable communities; the two go hand in hand. Decreasing the time residents spend in their cars and increasing the time they spend walking is a component found on the agendas of city governments to create a better quality of life in their communities. Popular movements, organizational and government campaigns, including New Urbanism ( the Center for Disease Controls Healthy Communities ( the American Institute of Architect s livable communities ( and many others, place a new unprecedented focus on the walking environment. Many of the requirements for safe and accessible sidewalks already exist as required codes. The Americans with Disabilities Act (ADA) of 0 provided civil rights protection to those with disabilities; amendments since that time have extended those rights to cover access to services, which includes accessible sidewalks. These code requirements are mandatory for cities and counties to uphold (), although time and budget constraints have often turned compliance into a reactive endeavor through ADA complaints and litigation. Research exists documenting the need of improved sidewalk accessibility, particularly for seniors (). America s growing senior population has been a spur for the creation of walkable communities. Within 0 years, the US Census Bureau estimates that more than % of Americans will be over the age of (). The American Association of Retired Persons (AARP), in their definition of livable communities, includes affordable and appropriate housing, supportive community features and services, and adequate mobility options. On AARP s Evaluation Guide for Livable Communities, walkability is an important element with 0 criteria listed for rating. Walkability is a key requirement for livable communities because walkable communities have been linked to many health benefits. Studies show that physical activity, such as walking, can extend older persons independent life, lower death rates, and reduce costs of health care. Investing money in creating a more walkable community brings large returns in terms of health and social benefits. A report from the United Kingdom () lists walking as lowering death rates by 0%, reducing cardiovascular disease up to 0%, and reducing the risks of high blood pressure and cholesterol, aside from exercise helping to reduce weight. The positive impact on mental health, and social connection to a community, has also been researched (), as well as it being an alternative that provides a safer mode of mobility to the aging than driving. In AARP s livability survey, walkability criteria includes a number of factors, among them are ratings for sidewalk maintenance, appropriate curb cuts and sidewalk obstructions. The need to reduce sidewalk hazards, particularly for seniors, underlies their greater susceptibility to falls. Each year, Americans who are and over fall, and a third of the falls cause injuries requiring medical treatment. The leading cause of injury deaths for those and over are falls and about half of those resulted in traumatic brain injuries (). As cities emphasize walking for health and spending more time out of doors, creating a safe walkable environment for seniors becomes critical. THE ULIP The ADA requires state and local governments to prepare a Self-Evaluation Plan to identify all access issues. Public agencies are required to develop a Transition Plan to identify and schedule the removal of barriers to their programs and facilities. But regularly updating transition plans for pedestrian facilities on public rights of way (such as curb ramps and sidewalks) is challenging. In the traditional approach, sidewalk measuring is a labor intensive task. One person walks down the sidewalk, placing a level at a prescribed distance, usually every two to four feet, measuring the running slope (slope in the direction of travel), cross slope (slope perpendicular to the direction of travel), and slab-to-slab faulting inventory assessment. On average, measuring covers less than one mile per hour. The many digital images and measurements that result can make assessing compliance difficult when referencing then from a desk at a later point in time. Due to the high cost, length of time, and complexity of conducting accurate measurements, many agencies find that they cannot feasibly complete a 0% inventory; instead they conduct samplings and

4 Khambatta & Loewenherz extrapolate. Often approximations, the data can also be out of date because budget limitations preclude updating on a regular basis. A new alternative methodology is based on an inertial profiler system that had been in use since the 0s to measure defects on highway and airport pavement surfaces. The Ultralight Inertial Profiler (ULIP) system was designed and developed by Starodub, Inc. in Kensington, MD, under contract with the Federal Highway Administration, which is responsible for ensuring access to pedestrian facilities within the public right-of-way. The innovative system, mounted on a Segway HT scooter, has both sensor and data acquisition components. The device s laser measurement system, three accelerometers, and gyroscope measure the sidewalk profile at a rate of,000 records of data per second. Together, these devices enable the capture of highly accurate locationspecific information about Figure : Accessibility Consultant performing surveys on the ULIP. sidewalk slope and small surface variations that can make a sidewalk difficult to navigate (). The accompanying software is compatible with a City s asset management database and Geographic Information Systems (GIS). Using the new Segway approach, one person is able to measure, in more detail than the traditional method, six miles of sidewalk per hour. The ULIP is therefore a cost-effective solution for inventorying and mapping the degree to which sidewalks and curb ramps meet ADA standards. Also advantageous is that the ULIP allows 0% data collection rather than samplings, resulting in accurate information for any sidewalk within the measurement boundaries. GIS INTEGRATION The ULIP uses ESRI ArcPad to automatically record the exact position of access barriers using the inertial navigation system. That information is then plugged into a GIS computer system to store, analyze,

5 Khambatta & Loewenherz 0 0 compare and display the information. The raw ULIP data is first imported into ArcGIS which turns the surveyed route into a digital rendering. Once the field data collection and validity checks are performed, the raw data is calibrated and processed so it can be analyzed. The data is associated to GIS layers, each representing one of several characteristics and linked to geographic points. For example, the ULIP measurements are one layer, curb ramps and pedestrian signals would each have a layer as well. GIS is used to overlap the data layers and determine the cumulative intensity of all characteristics throughout the area measured. Technical Infeasibility Analysis Among the barriers measured are those sidewalk areas that are deemed technically infeasible. Side walk grades, per ADAAG standards, should not be greater than five percent. But sidewalks follow the existing topography and the slope doesn t always meet the ADA guidelines. If a City is able to document the issue as technically infeasible because of the existing grade of the adjacent street, it can greatly reduce the amount of non-compliant barriers which the City is responsible for mitigating. ADA Activity Ranking Sidewalk Data Aggregation involves converting all the data from the various sidewalk related datasets into attributes which are then attached to each individual sidewalk feature. This is an intermediate step for barrier ranking and the mapping interface required to create an ADA dataset. When completed, activity scores for each ADA feature are assigned. Pedestrian facilities heavily used are assigned a higher priority for repairs than those which are not as often used. A variety of spatial data characteristics such as socioeconomic data, transit routes and stops, arterial classifications, housing and employment density, and others, are used to assess each feature and assign it a score. A key feature of this GIS-based ranking tool is a user-friendly interface which allows City staff to assign different weights to the various criteria and re-run the analysis in order to iteratively refine the analysis as needed. ADA Impedance Scoring Scores are determined for each ADA feature based upon the field data collected. A sidewalk with large portions of non-compliant slope and grade, or with numerous obstructions, would be assigned a higher priority for repairs than one with few issues. User-friendly interfaces allow City staff to adjust weights and try different scoring scenarios to validate the scoring strategy. Figure : Prioritizing data to achieve barrier ranking

6 Khambatta & Loewenherz 0 Final Prioritization scoring. The c activity and impedance scores from the above tasks are combined to create the final prioritization score for each feature. A City then has the option to use the created data layers on their existing computer system or through a GIS viewer where all information could be accessed from a dedicated web page. This browser-based GIS Viewer is a lightweight, fast application which allows for basic viewing and reporting on the ADA dataset through ArcGIS Server web application & documentation. The application s basic features and functionality: A set of cached base map services such as Bing Maps, aerial photography or similar, with interface for toggling visibility between them A custom cached map service displaying data from the City s GIS database, such as city limits, landmarks, or similar A dynamic map service showing the ADA data Standard map navigation tools A Table of Contents widget allowing user to turn on or off individual ADA data layers Address search functionality allowing user to enter an address and zoom to it on the map Identify functionality, allowing user to click on an ADA feature to get attributes, photo or hyperlink, etc Staff training in the use of the barrier ranking tool and browser-based mapping interface would be important to achieve the best results. Figure : Diagram showing the process of how the ULIP works (Courtesy of F. Loewenherz).

7 Khambatta & Loewenherz THE CITY OF BELLEVUE REDUCING COSTS The customized ULIP system was implemented through a pilot program in the City of Bellevue. The city has a population of 0,000 residents, with approximately percent living with a variety of disabilities and. % of the population over the age of. In 00, the City initiated an update to their ADA transition plan documenting existing physical barriers for persons with disabilities. Bellevue considered a number of options for gathering data on its miles of sidewalk and,000 curb ramps. Based on preliminary tests using existing options, the City concluded that the cost could be $ million at a minimum (). Hearing about the profiler technology, an interdepartmental City team partnered with federal and regional agencies to adapt it to their needs. In 00, the FHWA s Office of Pavement Technology funded Starodub to provide the City of Bellevue with a ULIP and support. Additional FHWA funding was provided in 00 for software refinements. Bellevue s city staff managed a three-agency partnership, including Transportation and IT Departments, to field test versions of the technology, and developed programming to synthesize ULIP data records into the city's GIS system. King County, a transit operator in the region, provides ADA curb-to-curb para-transit service, used extensively by the elderly. The service is a safety net for those whose disabilities prevent use of fixed route bus service. Bellevue consulted with the Department of Accessible Services to ensure that the ULIP technology would save time and money that would otherwise be spent conducting accessible pathway assessments. King County subsequently provided support for two staff members involved in the inventory process. The City of Bellevue sought confirmation that data acquired from the ULIP platform was reproducible and accurate as it was a new system. In 00, during the trial period, Bellevue and Starodub, Inc. staff undertook numerous tests comparing grade and cross slope measurements from the ULIP and alternative measurement devices (e.g., digital smart level readings) before a decision was made to employ this technology citywide. Bellevue testing with global navigation satellite system (GPS) found the accuracy of latitude/longitude data degraded in areas with tall buildings or thick tree canopies. After evaluating alternative approaches a sensor-based inertial navigation system integrated with an ESRI ArcPad interface was selected to enhance the accuracy of the spatial data in the inventory. To establish travel path control points, field technicians entered the start and end points for each data collection run on an ortho-photo image on the ULIP s notebook computer screen. The gyroscope, accelerometers and distance measurement instrument in the sensor box were used to compute the ULIP s relative path of travel. The relative travel path was combined with the control points to produce a travel path consistent with the city s GIS system (). The ULIP technology's efficacy was further tested by the City in 00, when two interns (supported by King County Metro s contribution) were able to inventory the entire city's pedestrian system, across. square miles, within a few months. GIS systems organized the millions of data points generated during the study and were instrumental in developing a web-based mapping interface for asset management and compliance monitoring. For technical infeasibility, City of Bellevue staff developed a GIS script that enabled a comparison of every non-standard sidewalk segment to the grade of the adjacent roadway. Adjacent roadway grade profiles were derived from a digital elevation model, a representation of ground surface topography. Criteria were then used to filter out miles of non-standard sidewalk grade locations deemed technically infeasible. The resulting ADA sidewalk and curb ramp self evaluation is documented on the City s intranet. This internal web interface maps all non-standard data points related to curb ramp location and compliance rating at the block face level, including sidewalk obstructions, heaving, running slope, and cross slope. Additional functionality of this geospatial database includes the ability to search and/or turn off certain barrier types and generate reports of the barrier information.

8 Khambatta & Loewenherz The ADA viewer interface creates a platform from which city staff will retrieve information on ADA barriers in the public right of way, informing the following accessibility programs: New Development: New development or redevelopment projects must include sidewalks and curb ramps. Citizen Request Program: Citizens submit requests to have a new curb ramp installed or have an existing curb ramp repaired at any location within the City. Annual Installation, Repair, and Maintenance Program: The City s Transportation Department repairs sidewalks and installs new curb ramps annually as part of routine maintenance. Street-Related Capital Improvement Projects: Sidewalks and/or curb ramps are installed and/or repaired in all street-related capital improvement projects (e.g., street widening or other street upgrades). The total cost of the city's ADA inventory effort - from technology development to complete data set - was $,000, a 0 percent cost savings over the original estimate to conduct a traditional survey (). The project began in 00 and concluded in 00. As a new technology, the City of Bellevue sought confirmation that data acquired from the ULIP platform was repeatable, reproducible, and accurate. Numerous tests were carried out comparing grade and cross slope measurements from the ULIP and alternative measurement devices (e.g., digital smart level readings). Bellevue and Starodub staff undertook a rigorous review of this data before a decision was made to employ this technology in a citywide inventory effort. During the citywide inventory effort, the city employed quality assurance and quality control protocol for validation testing of the software and hardware. The City of Bellevue advanced the ULIP platform and cities now using this system realize additional cost-savings because the technology has already been field tested and refined. After development and testing, the ULIP platform is the first technology of its kind that enables jurisdictions to quickly and accurately complete an ADA condition assessment inventory. Bellevue s project was identified as a best practice (). The ULIP system is now being utilized by the firm of Sally Swanson Architects in the following county and cities: County of St. Louis, MO Large Scope The County, with,000 residents of which almost % are over the age of, has a prohibitively large number of lineal miles of sidewalk across square miles. Data collecting, using the ULIP, is being divided into phases, with Phase I covering 0 linear square miles of sidewalks on arterials and collectors. The project began in 0 and will conclude in 0. The City of San Carlos Topographic Impassibility The City of San Carlos, with a population of,00 residents of which over % are over years old, is located between San Francisco and San Jose, among hilly terrain. The City has technical and topographical infeasibility issues in meeting ADA compliance on 0 miles of sidewalk within six square miles. The accuracy of the ULIP will allow pinpointing where a sidewalk slope would not be able to be fixed because of the steepness of an existing hill. Digital elevation models created by the city overplayed on the ULIP models in GIS reveal slopes along adjacent roadways that match with sidewalks, which can then be labeled technically infeasible. The project began in 0 and will conclude in 0.

9 Khambatta & Loewenherz The City of Clovis, CA DOJ requirements The City, with a population of,0 is under a court ordered consent decree by the Department of Justice, required to undertake a complete documentation of all their ADA barriers within the rights of way. The ULIP is in the process of gathering field data on linear miles of sidewalk over. square miles. The project began in 0 and will conclude in 0. The City of San Marcos, CA Planning Tool The City of San Marcos, with a population of approximately,000, is undergoing surveys of pedestrian facilities within the public rights of way using the ULIP. Their engineering department was interested in incorporating the data into their GIS system to be used as a scoping and planning tool (). Rather than static data, the City engineers will be able to sort and sift the field information instantaneously and over time to incorporate it into the city s overall maintenance plan. The project began in 0 and will conclude in 0. LESSONS LEARNED Partnerships Because agencies at all levels are required to respond to ADA mandates, developing partnerships increases the cost-effectiveness of technology development and compliance efforts. In the City of Bellevue, coordinated staffing and funding commitment from three participating agencies (Federal Highway Administration, King County, and the City of Bellevue) made it possible to undertake Bellevue s proposal to assess the applicability of inertial profiling technology in identifying existing facilities that limit access for persons with disabilities. GIS GIS can play an important role from data acquisition (i.e., organizing the millions of data points generated during the study) to project prioritization (i.e., determining priorities for improvements and displaying the corresponding locations on a variety of mapping interfaces. Integration of improvements The data inventory goal is to create a method of fixing barriers that is not haphazard but that bundles similar requirements or areas to produce a prioritized improvement list that can be integrated into an agency or city s capital improvement programming. The results provide cost-effectiveness through economies of scale and efficiency of delivery. In addition, the ULIP allows a priority ranking system of the most severe hazards, allowing them to be addressed first. New Possibilities on a Regional Scale For over twenty years, city and counties have had the legal obligation of providing accessible sidewalks free of barriers. But agencies did not have a tool that allowed them to be proactive in accessing all barriers. With the ULIP s ability to identify scope, a budget reflecting the specific barriers that need immediate attention can be folded into capital improvement projects and incorporated into GIS systems. The ULIP is an important component of this streamlined process for access. A rising population of elderly coupled with alternative planning movements for more walkable communities have made sidewalk safety an important issue. Walkable communities have been largely a district endeavor, because there has been little cost incentives to include larger areas. The ULIP opens the possibility of addressing sidewalk compliance as one issue of walkability on larger scales, even regionally. There is a cost advantage of gathering field data over many miles. While cities and towns strive to each have their walkable but fragmented areas, without much planning towards regional connectivity (), cooperatively and collaboratively addressing the issues may

10 Khambatta & Loewenherz truly help in creating walkable communities. Pooling of resources could also ease the task of rights of way maintenance, which is time consuming and costly. As a greater percentage of the population ages, rising to out of Americans over the age of sixty-five by 00 (), and city budgets are strained, while more and more plan for walking environments, adhering to ADA access requirements need not fall through the cracks. ACKNOWLEDGEMENT The FHWA supported Starodub, Inc, in their development of the ULIP. Initially invented to measure roughness on newly poured concrete pavements for the FHWA, the device proved to be easily transportable and could access sidewalks. Therefore, the ULIP was adapted to sidewalk accessibility and measurement of smoothness. Starodub completed initial validation testing, then provided technical support for prototype evaluation trails. The first field tests took place in 00 and refinements continued to 00. The authors thank Dorit Fromm for her research assistance and contribution to this work. REFERENCES. Americans with Disabilities Act Code of Federal Regulations. Part - Nondiscrimination on the Basis of Disability in State and Local Government Services. Chapter of Title, (CFR).. Kockelman, K., L. Heard, Y. J. Kweon, and T. Rioux. Sidewalk Cross-Slope Design: Analysis of Accessibility for Persons with Disabilities.In Transportation Research Record: Journal of the Transportation Research Board, No., Transportation Research Board of the National Academies, Washington, D.C., p. National Population Projections. Percent Distribution of the Projected Population by Selected Age Groups and Sex for the United States: 0 to 00. U.S. Census Bureau. NP00- T. Accessed July 0, 0.. Sinnett, Dr. D., K. Williams, Dr. K. Chatterjee, Dr N. Cavill. Making the Case for Investment in the Walking Environment A Review of the Evidence. Department of Planning and Architecture, Faculty of Environment and Technology, University of the West of England, Bristol BS QY, June 0.. Leyden, K.M. Social Capital and the Built Environment: The Importance of Walkable Neighborhoods. American Journal of Public Health, Vol., No., 00, pp. -.. Thomas, K.E., J.A. Stevens, K. Sarmiento and M.M. Wald. Fall-Related Traumatic Brain Injury Deaths and Hospitalizations Among Older Adults United States, 00. Journal of Safety Research, Vol., No., 00, pp. -.. Starodub User s Guide: Procedures using ULIP-ADA System. Starodub 0, pp -0.. Loewenherz, F. Asset Management for ADA Compliance Using Advanced Technologies. Journal of Public Works and Infrastructure, Vol., No., 0, pp-.

11 Khambatta & Loewenherz. City of Bellevue. Toward Universal Access: Americans with Disabilities Act Sidewalk and Curb Ramp Self-Evaluation Report for the City of Bellevue. September 00, p.. Quiroga, C, S. Turner. ADA Compliance at Transportation Agencies: A Review of Practices. Texas Transportation Institute, The Texas A&M University System, Texas 00 based on a study for the TRB: Asset Management Approaches to ADA Compliance. NCHRP 0-0 Task, National Cooperative Highway Research Program.. Schlossberg, M. From TIGER to Audit Instruments: Measuring Neighborhood Walkability with Street Data Based on Geographic Information Systems. Transportation Research Record: Journal of the Transportation Research Board, No., 00, pp. -.. Canepa, B. Bursting the Bubble Determining the Transit-Oriented Development s Walkable Limits. Transportation Research Record: Journal of the Transportation Research Board, Vol., 00, pp.-.