TANTALUM ELECTROLYTIC CAPACITORS

Size: px

Start display at page:

Download "TANTALUM ELECTROLYTIC CAPACITORS"

August Cain
5 years ago
Views:

TNTLUM LTROLYTI PITORS TMM Series (Miniturized Tntlum hip pcitors with xtended pcitnce Rnge) Fetures model type miniturized chip cpcitor developed on the bsis of TMS production technology idel for

1 TNTLUM LTROLYTI PITORS TMM Series (Miniturized Tntlum hip pcitors with xtended pcitnce Rnge) Fetures model type miniturized chip cpcitor developed on the bsis of TMS production technology idel for high density component mounting pplied in V equipment. Super compct : Reduced size 1/2 to 1/3 in comprison with TMS. Product symbol : (xmple) TMM Series cse 7V µf ±20% TMM 0J 6 M T R F Type of series Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code se size code Product specifictions Operting temperture rnge TMM 55 ~ +125 Rted voltge D2.5 ~ 35V 85 Surge voltge D3.2 ~ 45V 85 Derted voltge D1.6 ~ V 125 pcitnce 0. ~ 0µF Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Lekge current Refer to tble stndrd porduct tble Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Outline of drwings nd dimensions node indiction belf mrk tnδ Refer to tble stndrd porduct tble Prgrph 7.9, 120Hz L H Surge withstnding voltge / ±5% or less L Specified initil vlue Prgrph 7.14 / - ~ 0% 0 ~ +% 0 ~ +12% cse,, cse tnδ Vlue shown tble Temperture chrcteristics or less Prgrph Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H ±0.2 r ±0.3 ± ± Solder het resistnce L 0.01V 0.1V 0.125V or or or 0.5µ or less 5µ or less 6.25µ or less / ±5% or less L Dip 260±5, cse, cse ±1 sec. 5±0.5 sec. Reflow 260 ±1 sec. Stndrd vlue nd cse size pcitnce µf ode , (),,,, 4 0G,,,,,,, (),,,,,,, 6.3 (7) 0J,,,,,,,,,,,,,, Rted voltge (V.D) ,,,,,,,,, () 20 1D 25 1,,,,,,,,,,,,,,, (), () 35 1V, ( ): Under Developing Moisture resistnce leving High-temperture lod Therml shock Moisture resistnce lod Filure rte / ±% or less L / ±% or less L 125% / ±% or less L / ±% or less tnδ 0% L 200% 1% / 00h Prgrph 9.5, ~ 95%RH,500h Prgrph 9., 85 The rted voltge is pplied for 2000 hours. Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 20 times running. 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. 85. The rted voltge is pplied (through protective resistor of 1 Ω/V). For rtings not covered the tble, consult Hitchi I. 14 Hitchi I Inc.

2 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMM series Stndrd product tble - TMM series (For rtings not covered the tble, consult Hitchi I.) Rted voltge pcitnce Lekge current se Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme V.D µf tnδ µ code Product nme TMM TMM TMM TMM TMM TMM TMM TMM16 (0.18) (5.0) () TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM TMM1D TMM TMM1D TMM TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM1D TMM0G TMM TMM0G TMM TMM0G TMM TMM0G TMM TMM0G TMM TMM0G TMM TMM0G TMM TMM0G TMM TMM0J TMM16 (7) TMM0J TMM TMM0J TMM TMM0J TMM TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM0J TMM1V TMM TMM1V TMM TMM1V TMM TMM1V TMM TMM16 Lot indiction 0.08 TMM16 Month 0.08 TMM16 Yer 1 0. TMM TMM TMM TMM TMM17 Mrking indiction TMM series 2002 N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M, cse, cse G7 16 Simplified code of rted voltge (G : 4V) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Simplified code of nominl cpcitnce (7 : µf) The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph 7. Nominl cpcitnce Volue (µf) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) node indiction belt mrk Simplified code of rted voltge (G : 4V) G7 Lot indiction (for mnufcturing in Jnury, 2001) Simplified code of nominl cpcitnce (7 : µf) The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph 7. node indiction belt mrk Nominl cpcitnce Volue (µf) 16 Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) Hitchi I Inc.

3 TNTLUM LTROLYTI PITORS TMP Series Fetures Rendered even smller-sized thnks to the ccumulted technologicl knowhow (reduced to bout 1/3 the cubic volume of the TMS type). Suitble for high-density pckging essentil to V nd other equipment downsizing. Product symbol : (xmple) TM Series P cse 6.3V µf ±20% TM P 0J 6 M T R F Type of series (0805 Size Tntlum hip pcitors) Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code se size code Product specifictions Operting temperture rnge TMP 55 ~ +125 Rted voltge D2.5 ~ 20V 85 Surge voltge D3.2 ~ 26V 85 Derted voltge D1.6 ~ 13V 125 pcitnce 0.1 ~ µf Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Lekge current Refer to tble stndrd product tble Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Outline of drwings nd dimensions node indiction belf mrk L P cse product (0805) H tnδ Surge withstnding voltge Refer to tble stndrd product tble / ±% or less L Specified initil vlue / -12 ~ 0% 0 ~ +% 0 ~ +12% tnδ Vlue shown tble Temperture or less chrcteristics Prgrph 7.9, 120Hz Prgrph 7.14 Prgrph 7.12 L 0.01V 0.1V 0.125V or or or 0.5µ or less 5µ or less 6.25µ or less Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H MX R ±0.2 ±0.1 P Solder het resistnce / tnδ L ±5% or less Dip 260±5 P cse ±1 sec. Reflow 260 ±1 sec. Stndrd vlue nd cse size pcitnce µf ode G Rted voltge (V.D) J D P P P P P P P P P P P P (P) P P P P P P P P P P P P P P P P P P P P P P P P P P P (P) (P) ( ): Under Developing For rtings not covered the tble, consult Hitchi I. Moisture resistnce leving High-temperture lod Therml shock Moisture resistnce lod Filure rte / ±% or less L / ±% or less L 125% / ±% or less L / ±% or less tnδ 0% L 200% 1% / 00h Prgrph 9.5, ~ 95%RH,500h Prgrph 9., 85 The rted voltge is pplied for 2000 hours. Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 5 times running. 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. 85. The rted voltge is pplied (through protective resistor of 1 Ω/V). 16 Hitchi I Inc.

4 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMP series Stndrd product tble - TMP series (For rtings not covered the tble, consult Hitchi I.) Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme P TMP P TMP P TMP P TMP0G P TMP0G6 () (0.3) (13.2) P (TMP0G6) P TMP0J P TMP0J P TMP0J6 () (0.12) (1.9) P (TMP0J6) () (0.3) (13.9) P (TMP0J6) P TMP P TMP P TMP P TMP15 () (0.20) () P (TMP16) P TMP P TMP1D P TMP1D P TMP1D P TMP1D P TMP1D P TMP1D4 (1) (0.08) (0.5) P TMP1D5 Mrking indiction (xmple 1) 6.3V1µF 6 node indiction belt mrk Simplified code of nominl cpcitnce (6 : 1µF) (xmple 1) 6.3V1µF 6 node indiction belt mrk Simplified code of nominl cpcitnce (6 : 1µF) (xmple 2) V1µF node indiction belt mrk Simplified code of nominl cpcitnce ( : 1µF) Simplified code of rted voltge ( : V) node indiction belt mrk (xmple 2) V1µF Simplified code of nominl cpcitnce ( : 1µF) Simplified code of rted voltge ( : V) hen the cpcitnce code is the sme, use the voltge code for the higher rted voltge. hen indicting both rted voltge nd nominl cpcitnce by code, omit the multiplier of the cpcitnce code. The simplified code is subject to JIS 5143, prgrph. Lot indiction Month Yer 2002 N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M Hitchi I Inc. 17

5 TNTLUM LTROLYTI PITORS TMU Series Fetures Low profile tntlum chip cpcitors developed to meet the growing needs for flt cpcitors where height is criticl. Smll nd low profile: Obtined by thinning the TMS type. Type of series (Ultr Flt Low Profile Tntlum hip pcitors) Product symbol : (xmple) TMU Series cse 4V µf ±20% TMU 0G 5 M T R F Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code se size code Product specifictions Operting temperture rnge TMU 55 ~ +125 Rted voltge D2.5 ~ 35V 85 Surge voltge D3.2 ~ 45V 85 Derted voltge D1.6 ~ V 125 pcitnce 0.1 ~ 0µF Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Lekge current Refer to stndrd product tble Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Outline of drwings nd dimensions node indiction belt mrk L tnδ Refer to stndrd product tble Prgrph 7.9, 120Hz H Surge withstnding voltge / tnδ L ±5% or less Prgrph 7.14 U cse U, U, U cse Specified initil vlue / -12 ~ 0% 0 ~ +% 0 ~ +12% tnδ Temperture chrcteristics Vlue shown tble or less Prgrph Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H MX R ±0.3 ±0.2 U U U U Stndrd vlue nd cse size pcitnce µf ode U U U,U U,U U,U U,U U U 4 0G U U U,U U,U U,U U,U (U) U 6.3 (7) 0J U U U,U (U),U U,U U U U (U) Rted voltge (V.D) U U U (U),U U,U (U),U U U U For rtings not covered in the tble, consult Hitchi I. U U,U U,U U,U U,U U,U U (U) U 20 1D U U,U U,U U U U,U U,U U (U) (U) 25 1 U U U U,U U,U U,U U 35 1V U U U U U,U U,U ( ): Under Developing Solder het resistnce Moisture resistnce leving High-temperture lod Therml shock Moisture resistnce lod Filure rte L 0.01V 0.1V 0.125V or or or 0.5µ or less 5µ or less 6.25µ or less / ±5% or less L 1% / 00h / ±% or less L 125% / ±5% or less L / ±% or less tnδ 0% L 200% Dip 260±5 U, U cse U, U cse ±1 sec. 5±0.5 sec. Reflow 260 ±1 sec. / ±% or less Prgrph 9.5, ~ 95%RH,500h L Prgrph 9., 85 The rted voltge is pplied for 2000 hours. Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 5 times running. 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. 85. The rted voltge is pplied (through protective resistor of 1 Ω/V). 18 Hitchi I Inc.

6 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMU series Stndrd product tble - TMU series Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme U TMU U TMU U TMU U TMU U (TMU06) U TMU U TMU U TMU U (TMU07) U TMU U TMU U TMU U TMU0G U TMU0G U TMU0G U TMU0G6 (0.18) 2.4 (U) TMU0G U TMU0G U TMU0G U TMU0G U TMU0G U TMU0G7 0 (0.18) (6.0) (U) (TMU0G7) U TMU0G U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J U TMU0J6 (0.18) (4.2) U TMU0J U TMU0J U TMU0J U TMU0J6 0 (0.18) (7.0) (U) (TMU0J7) U TMU0J7 0 (0.18) (.4) (U) (TMU0J7) U TMU U TMU U TMU16 (0.12) (3) U TMU16 0. U TMU16 0. U TMU U TMU16 (0.12) (6.6) (U) TMU U TMU U TMU16 (0.12) () (U) TMU U TMU17 Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU16 (0.08) (3.5) (U) TMU U TMU U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D U TMU1D6 () (0.08) (3.0) (U) TMU1D6 () (0.08) (4.4) (U) TMU1D U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU U TMU1V U TMU1V U TMU1V U TMU1V U TMU1V U TMU1V U TMU1V U TMU1V5 Lot indiction Month Yer N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M Mrking indiction U, U cse V1µF U cse 16V1µF U cse 6 6 Simplified code of nominl cpcitnce (6 : 1µF) Lot indiction (for mnufcturing in Jnury, 2001) node indiction belt mrk Simplified code of rted voltge ( : 16V) V1µF U cse 16V1µF U cse 6 6 Simplified code of nominl cpcitnce (6 : 1µF) Lot indiction (for mnufcturing in Jnury, 2001) node indiction belt mrk Simplified code of rted voltge ( : 16V) U, U cse hen the cpcitnce code is the sme in the sme cse, use the voltge code for the higher rted voltge. The simplified code is subject to JIS 51-1(1998), prgrph nd IJ R-3813, prgrph Nominl cpcitnce Volue (µf) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) hen the cpcitnce code is the sme in the sme cse, use the voltge code for the higher rted voltge. The simplified code is subject to JIS 51-1(1998), prgrph nd IJ R-3813, prgrph 7. node indiction belt mrk Nominl cpcitnce Volue (µf) 16 Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) Hitchi I Inc. 19

7 TNTLUM LTROLYTI PITORS TMR Series Product symbol : (xmple) TMR Series cse V 0µF ±20% TMR 1 7 M T R F Type of series (Low SR Tntlum hip pcitors) Fetures TMR is Ultr SR tntlum chip cpcitors. Suitble for high frequency s high speed P, Switching Regultors, D/D cinverter, nd etc Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code se size code Product specifictions Operting temperture rnge TMR 55 ~ +125 Rted voltge D6.3 ~ 35V 85 Surge voltge D8 ~ 45V 85 Derted voltge D4 ~ V 125 pcitnce ~ 0µF Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Lekge current 0.01V or less Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Outline of drwings nd dimensions node indiction belf mrk L cse, cse H tnδ SR (0kHz) Mximum permissible ripple current (0kHz,20 ) ~ 0.06 or less 0 ~ or less or less 0 0. or less cse cse cse cse cse cse 500 ~ 700mΩ MX 350 ~ 500mΩ MX 0 ~ 500mΩ MX 370 ~ 400mrms MX 400 ~ 530mrms MX 490 ~ 10mrms MX Prgrph 7.9, 120Hz 0kHz 0kHz,20 Surge withstnding voltge / tnδ L ±5% or less Prgrph 7.14 Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H ±0.2 R ±0.3 ± ± Temperture chrcteristics Specified initil vlue / - ~ 0% 0 ~ +% 0 ~ +12% tnδ Vlue shown tble or less Prgrph 7.12 Stndrd vlue nd cse size pcitnce µf ode J /0.7 /0.6 /0.5 /0.35 /0.35 /0.2 /0.1 /0.1 /0.1 /0.1 1 /0.7 /0.6 /0.5 /0.35 /0.25 /0.2 /0.1 /0.1 /0.1 Rted voltge (V.D) 16 1 /0.6 /0.5 /0.4 /0.25 /0.2 /0. / D /0.6 /0.5 /0.35 /0.3 / /0.3 /0.3 /0.3 / V /0.3 /0.3 /0.5 se size / SR (Ω) t 20, 0KHz Solder het resistnce Moisture resistnce leving High-temperture lod L 0.01V 0.1V 0.125V / ±% or less L / ±% or less L / ±% or less L Dip 260±5 cse, cse ±1 sec. 5±0.5 sec. Reflow 260 ±1 sec. Prgrph 9.5, ~ 95%RH,500h Prgrph 9., 85 The rted voltge is pplied for 2000 hours. Therml shock / tnδ L ±% or less Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 5 times running. Moisture resistnce lod / tnδ L ±% or less 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. Filure rte 1% / 00h 85. The rted voltge is pplied (through protective resistor of 1 Ω/V). 20 Hitchi I Inc.

8 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMR series Stndrd product tble - TMR series Rted voltge pcitnce Lekge current se SR (0kHz) Mximum permissible ripple current (20 0kHz) V. D µf tnδ µ code Product nme Ω mrms TMR0J6M TMR0J6M TMR0J6M TMR0J6M TMR0J6M TMR0J6M TMR0J7M TMR0J7M TMR0J7M TMR0J7M TMR16M TMR16M TMR16M TMR16M TMR16M TMR16M TMR17M TMR17M TMR17M TMR16M TMR16M TMR16M TMR16M TMR16M TMR16M TMR17M TMR1D6M TMR1D6M TMR1D6M TMR1D6M TMR1D6M TMR16M TMR16M TMR16M TMR16M TMR1V6M TMR1V6M TMR1V6M Mrking indiction cse, cse Simplified code of rted voltge (G : 4V) G7 node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Simplified code of nominl cpcitnce (7 : µf) The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph Nominl cpcitnce Volue (µf) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) node indiction belt mrk Simplified code of rted voltge (G : 4V) G7 Lot indiction (for mnufcturing in Jnury, 2001) Simplified code of nominl cpcitnce (7 : µf) The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph 7. node indiction belt mrk Nominl cpcitnce Volue (µf) 16 Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) Lot indiction Month Yer 2002 N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M Hitchi I Inc. 21

9 TNTLUM LTROLYTI PITORS TMH Series (High Relibility Tntlum hip pcitors) Fetures moulded type chip cpcitor developed on the bsis of TM production technology especilly for cr electronics pplictions. lso usble for use in office utomtion nd other computer-bsed equipment which is required to offer high relibility. High het resistnce nd high relibility: Improved over the predecessor in high-temperture (125 ) relibility, moisture resistnce, nd temperture cycling test resistnce. Product specifictions Operting temperture rnge TMH 55 ~ +125 Rted voltge D4 ~ 35V 85 Surge voltge D5 ~ 45V 85 Derted voltge D2.5 ~ V 125 pcitnce 0.1 ~ 0µF Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Product symbol : (xmple) TMH Series cse 16V 1µF ±20% TMH 1 5 M T R F Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code Type of series se size code Lekge current tnδ 0.005V or 0.25µ, whichever is lrger or less 0.1 ~ or less ~ or less Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Prgrph 7.9, 120Hz Outline of drwings nd dimensions node indiction belf mrk L Surge withstnding voltge / tnδ L ±5% or less Prgrph 7.14 cse,, cse H Temperture chrcteristics Specified initil vlue / - ~ 0% 0 ~ +% 0 ~ +12% tnδ Vlue shown tble or less Prgrph 7.12 L 0.005V 0.05V 0.062V or or or 0.25µ or less 2.5µ or less 3.12µ or less Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H ±0.2 R ±0.3 ± ± Solder het resistnce Moisture resistnce leving / tnδ L / tnδ L ±5% or less ±5% or less 0% 200% Dip 260±5, cse, cse ±1 sec. 5±0.5 sec. Reflow 260 ±1 sec. Prgrph 9.5, 85 85%RH,00h Stndrd vlue nd cse size pcitnce µf ode G 7 0J,,, 1,,, Rted voltge (V.D) D,,,,,, V,,, High-temperture lod Therml shock Moisture resistnce lod Filure rte / ±% or less L 125% / ±5% or less L 200% / ±5% or less tnδ 0% L 200% 0.5% / 00h Prgrph 9., 85 The rted voltge is pplied for 2000 hours. (TMH : Derted voltge t 125 ) Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 00 times running. 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. H : The rted voltge is pplied (through protective resistor of 1 Ω/V). Hitchi I Inc.

10 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMH series Stndrd product tble - TMH series Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme TMH0G TMH0G TMH0G TMH0G TMH0G TMH0G TMH0G TMH0G TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH0J TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH TMH16 Mrking indiction Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH1D TMH TMH TMH TMH TMH TMH TMH TMH TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V TMH1V6, cse 16V1µF cse 20V1µF cse 6 D6 Simplified code of nominl cpcitnce (6 : 1µF) Lot indiction (for mnufcturing in Jnury, 2001) node indiction belt mrk Simplified code of rted voltge (D : 20V) 16V1µF cse 20V1µF cse 6 D6 Simplified code of nominl cpcitnce (6 : 1µF) Lot indiction (for mnufcturing in Jnury, 2001) node indiction belt mrk Simplified code of rted voltge (D : 20V), cse hen the cpcitnce code is the sme in the sme cse, use the voltge code for the higher rted voltge. The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph Nominl cpcitnce Volue (µf) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) hen the cpcitnce code is the sme in the sme cse, use the voltge code for the higher rted voltge. The simplified code is subject to JIS 5143, prgrph nd IJ R-3813, prgrph 7. node indiction belt mrk Nominl cpcitnce Volue (µf) 16 Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) Lot indiction Month Yer 2002 N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M Hitchi I Inc. 23

TNTLUM LTROLYTI PITORS TMTX Series (Tntlum hip pcitors with Internl Fuse) Fetures Protective-device-incorported chip tntlum cpcitor which is obtined by dding therml fuse to the TM type.

11 TNTLUM LTROLYTI PITORS TMTX Series (Tntlum hip pcitors with Internl Fuse) Fetures Protective-device-incorported chip tntlum cpcitor which is obtined by dding therml fuse to the TM type. High het resistnce: ithstnds infr-red-reflow nd solder dip nd high relibility. Prevention of fire or smoke with the work of internl fuse. Fusing chrcteristics:, cses: Open in less thn 0 sec t or in less thn 5 sec t 5., F cses: Open in less thn 5 sec t 5. Product specifictions Operting temperture rnge TMTX 55 ~ +125 Rted voltge D ~ 35V 85 Surge voltge D13 ~ 45V 85 Derted voltge D6.3 ~ V 125 pcitnce 1 ~ µf Test conditions JIS pcitnce tolernce ±% or 20% Prgrph 7.8, 120 Hz Lekge current 0.01V or 0.5µ, whichever is lrger or less Prgrph 7.7, in 5 minutes fter the rted voltge is pplied. Product symbol : (xmple) TMTX Series cse 16V µf ±20% TMTX 1 6 M T R F Type of series Outline of drwings nd dimensions Terminl code Pcking polrity code Pcking method code (T:crrier tpe) pcitnce tolernce code pcitnce code Rted voltge code se size code node indiction belf mrk tnδ Surge withstnding voltge 1.0 or less 0.04 or less ~ 0.05 or less or more 0.06 or less / ±5% or less L Prgrph 7.9, 120Hz Prgrph 7.14 L Specified initil vlue / -12 ~ 0% 0 ~ +% 0 ~ +12% H Temperture chrcteristics tnδ Vlue shown tble or less Prgrph 7.12 cse,, F cse L 0.01V 0.1V 0.125V or or or 0.5µ or less 5µ or less 6.25µ or less Dimensions (Unit : mm) se se size code L ±0.2 ±0.2 H ±0.2 R ±0.3 ± ± F ± Stndrd vlue nd cse size Rted voltge (V.D) pcitnce D 1 µf 1.0 ode ,F,F,F,F,F,F F 35 1V F Solder het resistnce Moisture resistnce leving High-temperture lod Therml shock Moisture resistnce lod Filure rte / ±5% or less L / ±% or less L / ±% or less L 125% / ±% or less L / ±% or less tnδ 0% L 200% 1% / 00h Dip 260±5 cse,,f cse ±1 sec. 5±0.5 sec. Reflow 260 ±1 sec. Prgrph 9.5, ~ 95%RH,500h Prgrph 9., 85 The rted voltge is pplied for 2000 hours. Leve t -55, norml temperture, 125, nd norml temperture for 30 min., 3 min., 30 min., nd 3 min. Repet this opertion 20 times running. 40, humidity 90 to 95%RH The rted voltge is pplied for 500 hours. 85. The rted voltge is pplied (through protective resistor of 1 Ω/V). 24 Hitchi I Inc.

12 TNTLUM LTROLYTI PITORS Stndrd product tbles - TMTX series Stndrd product tble - TMTX series Rted voltge pcitnce Lekge current se V. D µf tnδ µ code Product nme TMTX TMTX TMTX TMTX TMTX TMTX TMTX F TMTXF TMTX F TMTXF TMTX TMTX TMTX TMTX TMTX TMTX TMTX F TMTXF TMTX F TMTXF TMTX1D TMTX1D TMTX1D TMTX1D TMTX1D TMTX1D TMTX1D F TMTXF1D TMTX1D F TMTXF1D TMTX TMTX TMTX TMTX TMTX TMTX F TMTXF TMTX1V TMTX1V TMTX1V TMTX1V TMTX1V F TMTXF1V6 Mrking indiction cse N6 Simplified code of rted voltge (16V) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) N6 node indiction belt mrk Simplified code of rted voltge (16V) Lot indiction (for mnufcturing in Jnury, 2001),, F cse 16 Simplified code of nominl cpcitnce (N6 : µf) Nominl cpcitnce Volue (µf) node indiction belt mrk Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) 16 Simplified code of nominl cpcitnce (N6 : µf) node indiction belt mrk Nominl cpcitnce Volue (µf) Lot indiction (for mnufcturing in Jnury, 2001) Rted voltge (16V) *The simplified code is subject to JIS , prgrph nd IJ R-3813, prgrph 7.1. Lot indiction Month Yer 2002 N P Q R S T U V X Y Z 2003 b c d e f g h j k l m 2004 n p q r s t u v w x y z 2005 D F G H J K L M Hitchi I Inc. 25

13 TNTLUM LTROLYTI PITORS bout downsizing (upgrding) To meet the recent needs for electronic products smller in size nd lighter in weight, chip type tntlum cpcitor mnufcturers hve been downsized their products by vrious methods. Of these methods, the method of ensuring required cpcity by thinning the dielectric film gretly reduces the withstnd voltge chrcteristics. The most common method is therefore by using fine tntlum powder to enlrge the surfce re of the node per unit re. The TM type hs been enlrged in cpcity nd reduced in size by tking full dvntge of fine powder (hereinfter referred to s "high- V powder"). In recent yers, however, technicl dvnces hve been remrkble in downsizing nd cpcity expnsion in the industry of multilyer cermic cpcitors. The dvntge of TMs is therefore being chllenged. To keep the dvntge in competing with cermic cpcitors tody, it is impertive to use high-v powder to upgrde the TMs. Hitchi I is plnning to mke yet nother fmily of products. (1) Development of products with lrger cpcity thn the TMM type (2) Development of products with lrger cpcity thn the TMP type (0805 inch) (3) Development of products with lrger cpcity thn the TMU type (thin type, low-height version of the TMM type). (4) Development of products TMJ type (0603 inch) (5) Development of products Niobium solid lectrolytic pcitors. se pcity µf pcity µf se History of cpcity expnsion in 7-V models Pb free chip tntlum pcitor (TM serise) Tin-bsed Solder for Terminl Plting Het-resistnt t up to 260 Led lloy solder mounting No need to chnge existing mounting conditions (for conventionl not led-free production lines) Led-free solder mounting For led-free solder of ny formtion (For led-free production lines) Hitchi I hs developed tntlum cpcitor contining no led t the terminl, which went into mss production in pril It will be chnged completely by Mrch 2004 Led lloy hs long been used in electricl nd electronic equipment for solderings. Led is, however, known to be hrmful. The uropen Union hs nnounced tht it would bn the use of led nd other hzrdous substnces from In the interest of preserving the globl environment, Hitchi I hs been studying wy to eliminte the use of led in terminl plting. The new plting method is bsed on tin, the min ingredient in joint solder. It cn therefore be used in both led lloy nd led-free soldering. e ensure this product's high degree of het-resistnce (260 ; up to seconds) to provide strong support in the move to led-free production lines. 26 Hitchi I Inc.

14 Hed Office: Hitchi I Inc. 7F Nihon Seimei Gotnd ldg. No chome Nishi-Gotnd Shingw-ku, Tokyo 141 Jpn uropen Hed Office: I urope GmbH dolf-dembch-strße 14 D-829 Krefeld Germny Tel: +49 (0) Fx: +49 (0) mil: info@ic-europe.com ebsite: dition 2005

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS