SYSCO FOODS BAHAMAS FOOD SERVICE NASSAU, BAHAMAS
|
|
- Maud Glenn
- 5 years ago
- Views:
Transcription
1 SYSCO FOODS BAHAMAS FOOD SERVICE NASSAU, BAHAMAS January, 2019 Infrared Inspection Report Sysco Bahamas Foods Gladstone Road Nassau, Bahamas Company Contact Eddie O Connor Project: CHARTER OAK DRIVE, LITTLE ROCK, AR PHONE: & FAX: Logistics@usscanman.com
2 ORDER OF REPORT CONTENTS 1: Data To Facilitate Understanding & Utilizing Scan Report 2: Scan Results Overview & Action Taken Form 3: Identified Faulting Conditions, Information & Photographs 4: List Of Facility Equipment Identified By The Customer Representative & Notations Of Faulting Conditions Found DISCLAIMER This report and the recommendations contained in it are based upon conditions and practices observed and information made available to United Spectrographics personnel. This report does not purport to list all hazards or faulty conditions. It is not intended to indicate that other hazards or faulty conditions do not exist. Severity ratings in the report are based on the criteria shown in this report and are intended as guidelines only. No responsibility is assumed for the control of the facility s condition, maintenance practices or correction of conditions indicated herein. By issuing this report, neither United Spectrographics nor any of its employees makes any warranty, expressed or implied, concerning the contents of this report. Furthermore, neither United Spectrographics nor any of its employees shall be liable in any manner (other than liability that may be expressed in any policy of insurance that may be issued by United Spectrographics) for personal injury or property damage or loss of any kind arising from or connected with this inspection or failure to inspect.
3 January 30, 2019 Sysco Bahamas Foods Attn: Eddie O Connor Gladstone Road Nassau, Bahamas Dear Mr. O Connor; During the course of our January 2019 Infrared Inspection of your facility s electrical equipment, no equipment indicating a faulty thermal signature was located at the Sysco Bahamas Foods Nassau, Bahamas facility. Locating no faults is an unusual occurrence for us; we generally encounter only a small percentage of facilities a year with no faults. Your maintenance people appear to be doing an outstanding job. We greatly appreciated the opportunity to complete this project for you and look forward to the next one. If you have any questions concerning this infrared inspection, please call Sincerely, S Richard P. Lincourt United Spectrographics, LLC CHARTER OAK DRIVE, LITTLE ROCK, AR PHONE: & FAX: Logistics@usscanman.com
4 Utilizing Report Contents Included in this report are Photographs and Thermographs of problem areas found during our recent Infrared Inspection of your facility. Each problem area picture is accompanied by: Date Location Information Temperature Calculations Color-coded Temperature Intensity and/or Condition Significance Data A Brief Comment Relating The Item In The Photograph To Its Corresponding Thermograph Suggested Corrective Recommendations. In most cases, problems (faults) found will be listed according to the date and order that they were located, rather then by significance or priority, as we feel that you and/or your personnel can best judge this, keeping in mind circuit importance and thermograph intensity. Thermal intensity is indicated by use of a color-coded data inserts that locate a fault s position on the standard electrical failure curve. The color of the insert represents the temperature range of the hottest item, or a portion of the item's circuitry, pointed out in the thermograph. The temperature ranges which the colored inserts represent are grouped as follows: INSERT Red Orange Yellow Green Temperature Range 70ºC/126ºF and higher above Ambient Operating Temp. 40ºC/72ºF to 69ºC/124ºF above Ambient Operating Temp. 25ºC/45ºF to 39ºC/70ºF above Ambient Operating Temp. *10ºC/18ºF to 24ºC/43ºF above Ambient Operating Temp. ( * See page 4)
5 Determining Cost Effective Responses Electrical equipment failures generally follow a standard mechanical/electrical failure curve. Dividing the failure curve into temp. ranges and locating a problems position on the curve allows us to indicate the probable time to its failure. Knowing a problems probable time to failure allows you to make a cost effective response to the problem areas that we locate. Below is a depiction of the electrical fault failure curve with the thermal intensity ranges and the colors that we assign to faults detailed in our reports. STANDARD ELECTRICAL FAULT FAILURE CURVE (Does Not Include Area In Blue) MINOR INTERMEDIATE SERIOUS CRITICAL DEVICE TEMP IS AMBIENT, BUT DEVICE IS EITHER FAULTY OR UNSAFE. 10ºC * 18ºF 25ºC 45ºF 40 C 72ºF 70 C 126ºF AMBIENT TEMP YEARS MONTHS MONTHS TO WEEKS WEEKS TO NOW FAULTY EQUIP Built In Trend Monitoring When yearly scans are accomplished, report results allow you to trend monitor your electrical equipment without having to cross reference previous report findings. If a previous years problem is not repaired it will show up again in the current scan report and its current intensity range indicates a current effective response.
6 Defining Total Temperature and Ambient Operating Temperature And Explanation For Their Use Total Temperature: Total Temperature = Ambient Operating Temperature + Fault temperature Allows you, the customer, to evaluate possible damage to equipment. Leads fail between 90ºC/194ºF and 110ºC/230º Phenolic fails around 200ºC/392ºF Transformers and Motor Insulation failure temperature depends on insulation class rating. Contacts start to fail around 130ºC/266ºF Ambient Operating Temperature (AOT*) for Infrared Scanning Purposes: Temperature within a device container (Box or Cabinet) that is not directly affected by faulting component = Normal Equipment Operating Temperature Contained By Box or Cabinet. If there is no container (Example: Device mounted to a wall) it is the temperature adjacent to the device not affected by the fault. Allows you, the customer, to determine if device will operate at intended amperage. Most switchgear is rated to operate at approximately 40ºC/104ºF (Industrial) to 50ºC/122ºF (Marine) If AOT is enough above normal rated temperature, either of the following conditions can cause an unanticipated trip. 1. An intermittent high load. 2. A minor (Green) or intermediate (Yellow) fault. Report pages with photographs: PH stands for Visible Light Photograph TH stands for Infrared Light Thermograph *AOT stands for Ambient Operating Temperature Both black & white and color infrared thermographs are presented to better depict the fault condition.
7 In addition to the corrective response time frame suggested below and the failure curve located on the previous page, you may want to consider using the military standard responses presented below. Military Standard For Evaluating Faults Located In Electrical Equipment Utilizing Temperature Data Obtained With Infrared Imaging Equipment: Temperatures rise above Ambient Operating Temperature: *10ºC/18ºF to 24ºC/43ºF component failure unlikely, but corrective measures required at next scheduled routine maintenance period or as scheduling permits. (Green Label) 25ºC/45ºF to 39ºC/70ºF component failure probable, unless corrected. (Yellow Label) 40ºC/72ºF to 69ºC/124ºF component failure almost certain, unless corrected. (Orange Label) 70ºC/126ºF and above component failure imminent. Immediately inform the person responsible for continued operation of equipment. (Red Label) Note: United Spectrographics uses a Blue Label to indicate faults that require attention due to either ambient temperature (Ex: Phase Not Operating), faulty equipment elements or unsafe conditions. * Note: Temperature conditions below 10ºC/18ºF rise above AOT are not considered significant enough to record and are usually not included in the reports unless the fault temperature is being affected by a cooling medium such as oil or wind. Fault Correction Recommendation When Our Source Assessment Is Inaccurate: When a fault is indicated in a connection or component and examination by your electrician does not turn up a loose connection or faulty component where we have indicated, a fault does exist. The electrician should continue to investigate the next connection or component to be found in the direction that the heat is coming from until a source is located. Example: If a molded case breaker line side lead connection lug is indicated as a fault source and is found to be secure, but not frozen in place, look for a loose connection or sign of over temp. in the lead holder lug.
8 SCAN RESULTS OVERVIEW PROMPT ATTENTION ITEMS: Because of: 1. The intensity or heat level indicated at the time of the scan. 2. Deterioration caused by excessive temperature not present at the time of the scan. 3. Physical condition irregularities observed at the time of the scan. We recommend that the following faults be given prompt attention: Faults: No Faults Found Items With Asterisks Have High Total or Ambient Operating Temperatures. United Spectrographics January, 2019
9 SUMMARY OF FINDINGS FAULTS BY CATEGORY NUMBER OF FAULTS FAULT NO./ITEM NO. MINOR 0 0 INTERMEDIATE 0 0 SERIOUS 0 0 CRITICAL 0 0 SERIOUS 0 0 Number of items located at facility: 181 Number of faults: 0
10 ACTION TAKEN Sysco Bahamas Foods Nassau, Bahamas January, 2019 None Required
11 AREA/EQUIPMENT LIST Following is a list of the electrical equipment located at the Sysco Bahamas Foods, Nassau, Bahamas, facility and data relating to its operating condition at the time the scan was performed. NOTE: Items noted as visually inspected were not operational or show no visible load at the time of the inspection. No. Equipment Operating Visually Inspected EQUIPMENT LIST Fault # OFFICE AREA UPSTAIRS ELECTRICAL ROOM 1 120V Distribution Panel RP13 Section 1 X 2 120V Distribution Panel RP13 Section 2 X 3 120V Distribution Panel RP14 X 4 480V Distribution Panel LP13 X -TEST KITCHEN 5 120V Distribution Panel PPK X - -MAIN ELECTRICAL 6 Soft Start III X 7 Soft Start II X 8 Soft Start I X 9 Combination Starter EF 2-1 X 10 Combination Starter EF 2-2 X 11 Combination Starter EF 2-3 X 12 Combination Starter EF 2-4 X 13 Combination Starter P1-1 X 14 Combination Starter P1-2 X 15 Soft Start Compressor C-5 X V Distribution Panel RP21 Section 1 X V Distribution Panel RP21 Section 2 X 18 Contactor 1 X 19 Contactor 2 X
12 No. Equipment Operating Visually Inspected 20 Contactor 3 X Fault # 21 Contactor 4 X 22 75kVA Transformer T-RP21/LP21 X V Distribution Panel LP21 Section 1 X V Distribution Panel LP21 Section 2 X V Distribution Panel LRDP2 X V Distribution Panel LP28L X 27 Control Cabinet for Day Tanks X SWITCHBOARD 28 Transfer Switch X 29 Meter X 30 Circuit Breaker Unit 4 X 31 Circuit Breaker HVAC DP2 X 32 Circuit Breaker LRDP2 X 33 Circuit Breaker DP11 X 34 Circuit Breaker REFMCC2 X MCC 35 Main Lugs X 36 EF-1.11 X 37 EF-1.12 X 38 EF-1.13 X 39 EF-1.14 X 40 EF-1.15 X 41 EF-1.16 X 42 P1.1 Chilled Water Pump X 43 P1.2 Chilled Water Pump Standby X 44 AHU1.1 X 45 AHU1.2 X
13 No. Equipment Operating Visually Inspected 46 AHU-1.3 X 47 AHU-1.4 X 48 AHU-1.5 X 49 AHU-1.6 X 50 FF-2.1 X 51 EF-2.2 X 52 EF-2.3 X 53 EF-2.4 X 54 SF-1.1 X 55 EF-2.8 X MCC #2 56 Condenser Fan X 57 Condenser Fan X 58 Condenser Fan X 59 Condenser Fan X 60 Liquid Ammonia X 61 Liquid Ammonia X 62 Blank 63 Condenser Water Pump X 64 Refrig AHU 101 X 65 Refrig AHU 505 Receiving Dock X 66 Refrig AHU 504 Receiving Dock X 67 Refrig AHU 503 Receiving Dock X 68 Refrig AHU 401 Dry Cooler X 69 Refrig AHU 501 Receiving Dock X 70 Refrig AHU 102 Freezer X 71 Refrig AHU 502 Receiving Dock X 72 Refrig AHU 602 Produce X 73 Refrig AHU 402 Dry Cooler X Fault #
14 No. Equipment Operating Visually Inspected 74 Refrig AHU 601 Produce X Fault # 75 Refrig AHU 701 Rework X 76 Refrig AHU 103 Freezer X 77 Refrig AHU 301 Wet Cooler X 78 Refrig AHU 201 Meat Cooler X 79 Refrig AHU 302 Wet Cooler X 80 Refrig AHU 104 Freezer X 81 Refrig AHU 801 Rack Area X 82 AHU 202 X 83 Condenser #2 Fan #2 X 84 Refrig Comp #3 X 85 Refrig Comp #2 X X X 88 Comp C-5 X 89 Refrig Comp #1 X - -MACHINE ROOM / EQUIPMENT ROOM 90 Starter for Oil Pump C6 X 91 Disconnect LTR1 X 92 Disconnect LTR2 X 93 Control Cabinet for Pumps X 94 Starter for Motor Fan C7 X -ELECTRICAL ROOM # V Distribution Panel MDP-3 X V Distribution Panel NH3 X V Distribution Panel NL3 X 98 Overhead Transformer X 99 Control Cabinet CFP-1 X
15 No. Equipment Operating Visually Inspected 100 VFD EC-2 1 Fan X 101 VFD EC-2 2 Fans Can t Open 102 VFD EC-3 Fan #3 X 103 VFD EC-3 Fan #2 X 104 VFD EC-3 Fan #1 X 105 Control Cabinet for Comp C-7 X 106 Control Cabinet for Comp C-6 Can t Open 107 Control Cabinet for Comp C-4 X SWITCHBOARD 108 Bus X 109 Molded Case Panel NB-1 X 110 Molded Case Panel NB-2 X 111 Molded Case Comp C-6 X 112 Molded Case MCC-3 X 113 Molded Case Panel NM-1 X 114 Molded Case MDP-3 X 115 Molded Case Panel NH-3 X 116 Molded Case Comp C-4 X 117 Molded Case Comp C-7 X MCC #3 118 AHU-105 X 119 AHU-106 X 120 AHU-107 X 121 AHU-203 X 122 Main Lugs X 123 AHU-304 X 124 AHU-303 X 125 AHU-403 X 126 AHU-901 X Fault #
16 No. Equipment Operating Visually Inspected 127 AHU-1001 X Fault # 128 EVAP Cond EC-4 Pump X 129 NH3 Recirc Pump RP-3 X 130 NH3 Recirc Pump RP-4 X 131 Blank 132 Blank 133 Spare 134 EF2.5 X 135 Evap Cond EC-3 Pump X SWITCHGEAR 136 Transfer Switch Control X 137 Power Monitor X 138 Circuit Breaker Utility Main X 139 Surge Protector X 140 Circuit Breaker MSB3 X 141 Circuit Breaker MSB2 X 142 Circuit Breaker Generator G2 X 143 Circuit Breaker Generator G1 X ROOFTOP 144 Disconnect AC1 Can t Open 145 Disconnect AC2 X -BILLING V Distribution Panel LP12 X V Distribution Panel RP12 Section 1 X V Distribution Panel RP12 Section 2 X -FORKLIFT SHOP V Distribution Panel RP11 Section 1 X V Distribution Panel RP11 Section 2 X
17 No. Equipment Operating Visually Inspected 151 Contactor X 152 Contactor X 153 Contactor X V Distribution Panel LP11 Section 1 X V Distribution Panel LP11 Section 2 X V Distribution Panel 11 X V Distribution Panel LP15 Section 1 X V Distribution Panel LP15 Section 2 X 159 Overhead Transformer X 160 Battery Chargers X TRUCK SHOP kVA Transformer X V Distribution Panel RP41 Section 1 X V Distribution Panel RP41 Section 2 X V Distribution Panel LP41 Section 1 X V Distribution Panel LP41 Section 2 X 166 Lighting Contactor X DRY DOCK Overhead Transformers (2) (By Dock Door 22 X 168 Battery Chargers X 169 Combination Starter EF1-16 X 170 Combination Starter EF1-13 X 171 Overhead Transformer X 172 Combination Starter EF1-14 X 173 Combination Starter EF1-11 X 174 Combination Starter EF1-15 X 175 Combination Starter EF1-12 X -MEAT ROOM V Distribution Panel NL1 X Fault #
18 No. Equipment Operating Visually Inspected V Distribution Panel NM1 X Fault # V Distribution Panel NH1 X CHILL DOCK V Distribution Panel NB-1 Section 1 X V Distribution Panel NB-1 Section 2 X 181 Forklift Battery Chargers X
SYSCO ALLARD VILLE DE QUEBEC, QUEBEC, CANADA
SYSCO ALLARD VILLE DE QUEBEC, QUEBEC, CANADA November, 2016 Infrared Inspection Report Sysco Allard 199 2e Avenue Ville de Quebec, QC, G1L 3A5 Company Contact Louis Grenier Project: C041116 2605 CHARTER
More informationSYSCO BUCKHEAD BEEF CHARLOTTE, NORTH CAROLINA
SYSCO BUCKHEAD BEEF CHARLOTTE, NORTH CAROLINA August, 2016 Infrared Inspection Report Sysco Buckhead Beef 3516 Green Park Circle Charlotte, North Carolina, 28217 Company Contact Mark McNeely Project: 15120816
More informationSYSCO ST JOHN'S MOUNT PEARL, NEWFOUNDLAND
SYSCO ST JOHN'S MOUNT PEARL, NEWFOUNDLAND October, 2016 Infrared Inspection Report Sysco St. John s 10 Old Placentia Road Mount Pearl, NF A1N 4P5 Company Contact: David Shaw Project: C261016 2605 CHARTER
More informationBUZZI UNICEM USA PENSACOLA TERMINAL MILTON, FLORIDA
BUZZI UNICEM USA PENSACOLA TERMINAL MILTON, FLORIDA May, 2017 Infrared Inspection Report Buzzi Unicem Terminal 6266 Da Lisa Road Milton, Florida, 32583 Company Contact Andy Rogers Project: 04110517 2605
More informationPAVESTONE COMPANY CST PAVERS PEDRICKTOWN, NEW JERSEY
PAVESTONE COMPANY CST PAVERS PEDRICKTOWN, NEW JERSEY October, 2015 Infrared Inspection Report Pavestone Company Company Contact Joe Dougan Project: 06051015 2605 CHARTER OAK DRIVE, LITTLE ROCK, AR 72227
More informationSYSCO BUCKHEAD BEEF COLLEGE PARK, GEORGIA
SYSCO BUCKHEAD BEEF COLLEGE PARK, GEORGIA June, 2016 Infrared Inspection Report Sysco Buckhead Beef 4500 Wickersham Drive College Park, Georgia, 30337 Company Contact: Richard Blahnik Project: 05220616
More informationSIDEWINDER DRILLING RIG 122 CLEBURNE COUNTY, ARKANSAS
SIDEWINDER DRILLING RIG 122 CLEBURNE COUNTY, ARKANSAS March, 2015 Infrared Inspection Report Sidewinder Drilling Rig 122 Company Contact Jesse Russell Project: 07090315 2605 CHARTER OAK DRIVE, LITTLE ROCK,
More informationSelection of Electrical PPE Tables
Selection of Electrical PPE Tables Instructions Table 1 - Starting with Table 1, select the task you plan to do (right-hand column) and the condition of the equipment you will be working on, (center column).
More informationYou Just Experienced an Electrical Failure, What Should You Do Next? By Don Genutis Hampton Tedder Technical Services
You Just Experienced an Electrical Failure, What Should You Do Next? By Don Genutis Hampton Tedder Technical Services Why Failures Occur Insulation Failure - Every electrical component is comprised of
More informationInfrared Thermography Inspection Guidelines. Date Issued:
Infrared Thermography Inspection Guidelines Date Issued: 2002 01 29 Created By: Approved By: L. Henderson G. Durnford Table Of Contents Table Of Contents...i POLICY STATEMENT...1 APPLICABLE INTERNATIONAL
More informationTWC Services, Inc. Structured On-The-Job Training for JT- 1, 2, 3
TWC Services, Inc. Structured On-The-Job Training for JT- 1, 2, 3 The following tasks parallel the Jr. Tech (JT-1, 2, 3) description and development plan and use the Refrigeration and Air conditioning
More informationLow GWP R-404A Alternatives for Commercial Refrigeration. Barbara H. Minor Dr. Frank Rinne DuPont Fluorochemicals
Low GWP R-404A Alternatives for Commercial Refrigeration Barbara H. Minor Dr. Frank Rinne DuPont Fluorochemicals Chillventa Nűrnberg October 9-11, 2012 Topics Regulatory Environment Properties of New Refrigerants
More informationMonitoring transformers with infrared cameras
APPLICATION NOTE Monitoring transformers with infrared cameras Most transformers are cooled by either oil or air while operating at temperatures much higher than ambient. In fact, operating temperatures
More informationInfrared Thermography Report
Infrared Example An Infrared thermography survey was recently conducted at the XXXX facility. This report highlights any equipment with identified faults or that requires repair work. During the survey
More informationInnovative Techniques for Mitigating Arc Flash Exposure
Innovative Techniques for Mitigating Arc Flash Exposure Presented at MEMSA 2009 Annual Meeting & Technical Symposium 2007 Eaton Corporation. All rights reserved. INTRODUCTION. As more and more industries
More informationAE R1 February 2015
February 2015 CoreSense Diagnostics for Copeland Scroll UltraTech Air Conditioning Compressors TABLE OF CONTENTS Safety Safety Instructions... 2 Safety Icon Explanation... 2 Instructions Pertaining to
More informationIt is essential that the maintenance staff is qualified for electrical works and follows safety procedures.
MAINTENANCE OF POWER FACTOR CORRECTION EQUIPMENTS Procedures, suggestions and traceability The purpose of this document is to propose a maintenance method that allows to identify the elements to be maintained
More informationPixel Thermographics Ltd. Compressed Air Leak Detection Survey SAMPLE REPORT. Pixel Thermographics Ltd
Compressed Air Leak Detection Survey By Sunrise House Hulley Road Macclesfield Cheshire SK10 2LP Tel: +44 (0)8456 042 703 Web: Email: info@pixelthermographics.co.uk Survey Information This sample report
More informationELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
More informationATL R/V Atlantis AUXILIARY PLANT OPERATION APPENDIX OPERATING PROCEDURES
110 AIR CONDITIONING CHILLED WATER PLANT 1. Ensure power to water chiller controller and all fan coil unit controllers is on 2. Ensure chilled water expansion tank level is at its proper level 3. Ensure
More informationAR740 RPS Redundant Power Supply Quick Install Guide
AR740 RPS Redundant Power Supply Quick Install Guide AT-RPS 740 Quick Install Guide Document Number. 1999-2006 Allied Telesis Inc. All rights reserved. No part of this publication may be reproduced without
More informationMODELS YLAA YLAA0175 DESIGN SERIES A, B & C DEVELOPMENT LEVEL A
AIR-COOLED SCROLL CHILLERS RENEWAL PARTS Supersedes: 50.72-RP (80) Form 50.72-RP () MODELS YLAA0070 - YLAA075 DESIGN SERIES A, B & C DEVELOPMENT LEVEL A GS5608 R-0A 70-75 TON 60 Hz Issue Date: January,
More information120 PSI FAST-FILL AIR SOURCE KIT 25% Duty Compressor on 1.5 Gallon Air Tank
120 PSI FAST-FILL AIR SOURCE KIT 25% Duty Compressor on 1.5 Gallon Air Tank PART NO. 20003 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationEnergy Control. Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: cell:
Energy Control Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: 905.577.0303 cell: 905.977.0210 consultant@staffaid.ca www.staffaid.com Safety, Energy Control, Power Lockout & Function Test Procedures
More informationR E D I C O N T R O L S
R E D I C O N T R O L S Operation & Maintenance Manual Portable Service Purger for Low Pressure Chillers Model: PSP-LP-1B For Refrigerants R-11, R-113, R-114 & R-123 & Other Similar Refrigerants File Literature
More informationAppendix A: Energized Work Permit
Appendix A: Energized Work Permit Part I: To be completed by the Supervisor Description of Circuit & Equipment: Job Location: Description of Work to Be Done: Justification of why the circuit cannot be
More informationHazardous Energy Control/Lockout
This is a photographic template your photograph should fit precisely within this rectangle. Hazardous Energy Control/Lockout MESH 8.0 - Process Safety Awareness Training 2008 Eaton Corporation. All rights
More informationRisk Assessment Procedure
Voltage, current testing, troubleshooting Infrared inspection Visual inspection, data collecting Risk Register ES Acc 6 4 1 1 6 36 ES < Acc 6 4 3 3 10 60 AF/AB 40 Acc 8 3 2
More informationElectrical Safety PPT-SM-ELECTSFTY V.A.0.0
Electrical Safety 1 Electrical Safety OSHA s electrical safety standard covers Work on or near exposed energized equipment Proper use of electrical protective equipment Safe use of portable electric equipment
More informationProduct Overview. Product Description CHAPTER
CHAPTER 1 This chapter provides a functional overview of the Cisco Redundant Power System 2300 and covers these topics: Product Description, page 1-1 Features, page 1-3 Supported Devices, page 1-4 Deployment
More informationProtection of motor circuits
Protection of motor circuits Circuit breaker/contactor coordination A circuit supplying a motor may include one, two, three or four switchgear or When a number of devices are used, they must be coordinated
More informationElectrical Hazards: Overhead and underground power lines. tools. Ungrounded electrical systems and tools. in wet/damp environments
ELECTRICAL SAFETY Electrical hazards pose a serious threat to worker safety. Many workers are unaware of the potential electrical hazards present in their work environment which makes them more vulnerable
More informationPreparer: Owner: Approver: EHS Team Member TES Manager Site Manager
Procedure No.: BMEHS-002.033 Page: 1 of 10 Preparer: Owner: Approver: EHS Team Member TES Manager Site Manager Document Revision Change Table Revision Revision Description Revised Revision Number New By
More informationMaintenance handbook
Maintenance handbook ontents HPU IDENTIFIATION SHEET... 4 1. MAINTENANE... 5 1.1 Filling level... 5 1.2 Fluid top-up... 5 1.3 Fluid replacing... 5 1.4 Fluid temperature control... 6 1.5 Functional control...
More informationTHE OSHA LOCK-OUT/TAG-OUT STANDARD
PRESENTER'S GUIDE "LOCK-OUT/TAG-OUT" Training for THE OSHA LOCK-OUT/TAG-OUT STANDARD Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM
More informationInstruction Manual No. 742, 8/98
Instruction Manual No. 742, 8/98 Eclipse Ratio Regulators ES Series COPYRIGHT Copyright I997 by Eclipse Combustion, Inc. All rights reserved worldwide. This publication is protected by federal regulation
More informationPortable Oil Lube Air Compressors
Portable Oil Lube Air Compressors 8003631 8003632 0410149 8018968 8018940 Owner s Manual Read and understand operating instructions before use Safety definitions The information listed below should be
More informationThis parts list is current as of the above revision date. See for the current revision.
Parts List This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-.pdf for the current revision. Condensing Units Table of Contents Model Explanation...................................................................................................................
More informationLeader s Guide ERI Safety Videos
1419 SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting a
More informationTalas Measurer 250VDC Datasheet
Talas Measurer 250VDC Datasheet KEY FEATURES Automatic insulation resistance monitoring AC and DC motors MODBUS protocol M2M-modem communication Monitor from any computer or smart device Adjustable automatic
More information200 PSI HIGH-FLOW AIR SOURCE KIT
200 PSI HIGH-FLOW AIR SOURCE KIT 50% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20008 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationMODEL NUMBER: PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or Electrocution: MODEL NUMBER: 20008 200 PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank IMPORTANT: It is
More informationPRESCOTT SCHOOL DISTRICT NO South A Street Prescott, WA The Control of Hazardous Energy (Lockout/Tagout)
PRESCOTT SCHOOL DISTRICT NO. 402-37 207 South A Street Prescott, WA 99348 509-849-2217 The Control of Hazardous Energy (Lockout/Tagout) I. Purpose The Control of Hazardous Energy (Lockout/Tagout) This
More informationDuPage County Environmental, Safety, Health & Property Loss Control Program Hazardous Energy Control (Lockout/Tagout)
Purpose: To provide the minimum requirements for the lockout or tagout of energy isolating devices whenever work is performed or servicing is done on County of DuPage machinery, equipment, vehicles and
More informationMODEL NUMBER: M20005 AIR SOURCE KIT. 30% Duty Compressor on. 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE
MODEL NUMBER: M20005 AIR SOURCE KIT 30% Duty Compressor on 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock
More informationLeader s Guide ERI Safety Videos
1717 SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting
More informationMISSOURI UNIVERSITY OF SCIENCE & TECHNOLOGY Procedure: 3.6
Procedure This electrical safety procedure structures safety procedures to meet the requirements of the NFPA-70E Standard. The program is designed for qualified employees who occasionally must perform
More information30T A/Manual Hydraulic Shop Press
30T A/Manual Hydraulic Shop Press Operation Manual 1 1. Important Information 1.1 Safety Information 1.1.1 Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when
More informationSEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits
Carrying out fault location on electrical equipment and circuits Overview This unit identifies the competences you need to locate faults on electrical equipment and circuits, in accordance with approved
More informationJORDAIR/BAUER Service Manual
JORDAIR/BAUER Service Manual Breathing Air Compressor Maintenance Log Doc. ServiceManual Page - 1 SAFETY RELEASE-2016 The following document is prepared to ensure safety of operators and service technicians.
More informationConcentrate Distribution System (Stand Mounted) A-CDS-70-X & A-CDS-TANK-X-ST Industrial Drive, Orlinda, TN 37141
0 Operation Manual Concentrate Distribution System (Stand Mounted) A-CDS-70-X & A-CDS-TANK-X-ST 615-654-4441 sales@specialtyh2o.com 615-654-4449 fax TABLE OF CONTENTS Section 1 GENERAL 1.1 Warnings and
More informationSAFETY PRECAUTIONS FOR THE BLACK BEARD S BEACH WATER PARK
SAFETY PRECAUTIONS FOR THE BLACK BEARD S BEACH WATER PARK The following safety precautions are for the Black Beard s Beach Water Park and are based on the Operations Manual Warranties & As-Builts for the
More information200 PSI FAST-FILL AIR SOURCE KIT
200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationManagement Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
More informationEffective March 2015 Supersedes S August 2002
Reclosers MN280009EN Effective March 2015 Supersedes S280-40-11 August 2002 COOPER POWER SERIES Type R, RE, W, WE reclosers closing solenoid contactor replacement kit KA852R installation instructions DISCLAIMER
More informationElectrical Safety Program
Electrical Safety Program The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 6/8/2018 Table of Contents 1. Summary...
More information42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only)
42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) 42047 Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only) 45052 Constant Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor
More informationPROGRAM: Control of Hazardous Energy (LOCKOUT) Chapter 5
Classroom, Occupational Safety & Health Plan Date: August 5, 2017 PROGRAM: Control of Hazardous Energy (LOCKOUT) Chapter 5 1. Purpose This document establishes the Lockout Program for Tidewater Community
More informationUSER MANUAL. JET TST and JET TST S.
USER MANUAL JET TST and JET TST S www.sisteven.com Types of Jet fans: JET TST UNI: Impulse axial fan single direction JET TST S UNI: Impulse axial fan single direction (short case) JET TST REV: Impulse
More informationMP15 Jockey Pump Controller
Setup and Operating Instructions MP15 Jockey Pump Controller This manual provides general information, installation, operation, maintenance, and system setup information for Metron Model MP15 Jockey Pump
More informationGround Fault Circuit Interrupter(GFCI) Policy
NewStar Netronics, LLC American Products for the World Ground Fault Circuit Interrupter(GFCI) Policy 3926 East 3 rd Street Tulsa, OK 74112 Phone (918)894-5006 Fax (918)836-9909 tech@newstarnetronics.com
More informationLockout/Tagout - Energy Control Program
Lockout/Tagout - Energy Control Program Lockout and Tagging of ELECTRICAL Circuits This portion of the K.R. Miller Contractors, Inc. safety program has been created to maintain a written copy of procedures
More informationPRAHER PLC-MP AQUASTAR MANAUL 2009
PRAHER PLC-MP AQUASTAR MANAUL 2009 1. Copyrights This Operating Manual contains copyright-protected information. All rights reserved to Praher Kunststofftechnik GmbH. This Operating Manual is designed
More informationMini Pod Press. #78H-M2 Mini Pod Press Manual-R1
Mini Pod Press Model - #78H-M2 SN - Year - JLT Clamps 108 Parker Ave. Poughkeepsie, NY 12601 Tel: (800) 901-8037 Fax: (845) 452-0764 E-mail: clampguys@jltclamps.com Web: http://www.jltclamps.com TABLE
More informationMaxSB - Low Voltage Switchboard
BU 3101 Low Voltage Systems, March 2009 Low Voltage Systems MaxSB - Low Voltage Switchboard May 5, 2009 Slide 1 MaxSB Product Overview Description Value Rated Main bus current 1600A, 2000A, 3000A, 3200A,
More informationGeneral Requirements of the NEC Advanced Course. Building Officials and Inspectors Educational Association
General Requirements of the NEC Advanced Course Building Officials and Inspectors Educational Association General Requirements -NEC Course Outcome Explain general requirements found in Article 110 of the
More informationProject: Consultant : MEP Contractor: PREPARED BY: DORMAN SMITH SWITCHGEAR - DUBAI REVIEWED BY CONSULTANT : Page 1 of 15
PRCEDURES FR RUTINE TESTING F CAPACITR BANKS Consultant : MEP Contractor: Project: PREPARED BY: DRMAN SMITH SWITCHGEAR - DUBAI NAME: REVIEWED BY CNSULTANT : NAME: SIGNATURE: SIGNATURE: Page 1 of 15 Table
More informationInstallation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units
Installation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units Models: EPS Single Pump EPT Twin Pump EPS-HP EPT-HP Single Pump High Pressure Twin Pump High Pressure
More informationList all key terms and acronyms used in the procedure, and their definitions.
Purpose The purpose of this procedure is to provide guidelines for electrical safety in general within Seqwater in compliance with the Electrical Safety Act 2002, Industry Codes of Practice, Regulations,
More informationLockout/Tagout Training Overview. Safety Fest 2013
Lockout/Tagout Training Overview Safety Fest 2013 Purpose of Lockout/Tagout The standard covers the servicing and maintenance of machine and equipment in which the unexpected energization or start up of
More informationGas Network Craftsperson
Gas Network Craftsperson Unit EIAU016 Carrying out Fault Diagnosis on Electrical Equipment and Circuits This assessment specification has been developed as part of the network maintenance craftsperson
More informationArc Flash 101. presented by Arc Flash Blaster LLC
Arc Flash 101 presented by Arc Flash Blaster LLC ARC FLASH? ARC FLASH INCIDENT STANDARDS AND REGULATIONS Arc flash accidents... 35,000 F Molten Metal Pressure Waves Sound Waves Copper Vapour: (Solid to
More informationOperating Manual. Models AQT-02 & AQT-COO2 Manual No. MON004 (Rev 2 April 2000)
Models AQT-02 & AQT-COO2 Manual No. MON004 (Rev 2 April 2000) Operating Manual AIR SYSTEMS INTERNATIONAL, INC. 829 Juniper Crescent, Chesapeake, Va., 23320 Telephone (757) 424-3967 Toll Free 1-800-866-8100
More informationInstallation Instructions
32LT900301 32LT900611 32LT901247 32LT901647 SMALL ROOFTOP S ACCESSORY MOTORMASTERR I HEAD PRESSURE CONTROLLER 3to10TONS Installation Instructions TABLE OF CONTENTS PACKAGE CONTENTS... 1 PACKAGE USAGE-
More informationCOOPER POWER SERIES. UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions. Surge Arresters MN235006EN
Surge Arresters MN235006EN Effective August 2016 Supersedes June 2014 (S235-35-1) COOPER POWER SERIES UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions DISCLAIMER
More informationDow s New Practice for Locating Temporary Portable Buildings. P. Partridge 9/29/05 UNRESTRICTED - May be shared with anyone Slide 1
Dow s New Practice for Locating Temporary Portable Buildings P. Partridge 9/29/05 UNRESTRICTED - May be shared with anyone Slide 1 Dow guidelines issued following the explosion at BP s Texas City facility
More informationInspection Recommendations
S&C Vista SD Underground Distribution Switchgear Pad-Mounted and Vault-Mounted Styles Outdoor Distribution (17.5 kv and 29 kv) With Visi-Gap Load Interrupter Switches and Visi-Gap Fault Inetrrupters Inspection
More informationDP Station Keeping Event Bulletin
DP Station Keeping Event Bulletin IMCA DP Station Keeping Event Bulletin 04/17 October 2017 The following event trees have been compiled from recent reports received by IMCA. The originators granted IMCA
More informationDEH Instructions. Three-Phase, Platform-Mounted Distribution Transformers
g DEH 40050 Instructions Three-Phase, Platform-Mounted Distribution Transformers Introduction The equipment covered by these instructions should be operated and serviced only by competent technicians familiar
More informationWelding With Arc Welding Equipment
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Welding With Arc Welding Equipment Self Inspection Checklist Guidelines: This checklist
More informationHydrogen Cooling System
g GEK 95213a Revised, June 2007 GE Energy 7FH 2 GENERATOR These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection
More informationOperating Instructions
ELECTRIC AND GAS FRYER AUTOMATIC BASKET LIFT SYSTEM Operating Instructions 302 Spencer Lane P.O. Box 5369 San Antonio, Texas 78201 (800) 525-8130 (210) 731-5000 Fax: (210) 731-5099 www.ultrafryer.com PREFACE
More informationRULE 1. Facilities and Equipment
RULE 1 Facilities and Equipment 1.1 Competition Area The competition area is defined as the portion of the facility where student-athlete and team competition is played. The playing area shall be clearly
More informationNew AQF Filter Polymer Filtration System
New AQF Filter Polymer Filtration System Operator Manual Covering Serial Number 20002001 onwards February 2011 Index Disclaimer notice...3 Introduction...4 Important safety notices...5 Getting started...6
More informationPower Supply Facilities Failure (Units 3-4 Temporary M/C (A), etc.) March 22, 2013 Tokyo Electric Power Company
< Reference > Power Supply Facilities Failure (Units 3-4 Temporary M/C (A), etc.) March 22, 2013 Tokyo Electric Power Company Occurrence of Events in a Chronological Order At around 6:57 PM on March 18,
More informationSample Written Program for The Control of Hazardous Energy (Lockout/Tagout)
USAG Bavaria Safety Office Sample Written Program for The Control of Hazardous Energy (Lockout/Tagout) Nov 2016 1910.147 The Control of Hazardous Energy (Lockout/Tagout) The following lockout/tagout program
More informationKMU SUBSTATION WORKSHOP
Rick Aguilar, Director of Job Training & Safety KMU SUBSTATION WORKSHOP JUNE 29-30, 2016 OTTAWA, KS Hazards & Safety Rules Qualified Personnel & Task-Based Hazard Mitigation Worksite Applications & Considerations
More informationOperating Manual. Model BAC-30RT30/BAC-30DC
Model BAC-30RT30/BAC-30DC Manual No. BAC012 (Rev 1 October 2002) Operating Manual AIR SYSTEMS INTERNATIONAL, INC. 829 Juniper Crescent, Chesapeake, Va., 23320 Telephone (757) 424-3967 Toll Free 1-800-866-8100
More informationHAS2400 Hepa Air Scrubber
HAS2400 Hepa Air Scrubber Diamonds Products 15 SW 40th Ave Great Bend, KS 67530 USA Toll Free: (866) 539-1694 Local: (620) 792-4542 Purchase Date: Serial Number: Purchased From: The DIAMOND HAS2400 HEPA
More informationAquavar SOLO 2 Frequently Asked Questions
Aquavar SOLO 2 Frequently Asked Questions How do I size the Aquavar SOLO 2 for the appropriate pump/motor combination? Can I use a 208 Volt motor? Can I run the Aquavar SOLO 2 up to 80HZ? What are the
More informationVeriforce TG CCT 609OP. Training Guide
Training Guide Directions: This training guide is to be used by a Veriforce Authorized Evaluator/Trainer and Trainee during on-thejob training (OJT) or prior to an evaluation as a resource. (S) Indicates
More informationNIOSH Task Number 18388
National Personal Protective Technology Laboratory Technology Evaluation Branch Certified Product Investigation Program Report of Self-Contained Breathing Apparatus Second Stage Regulators Submitted by
More informationELECTRIC OPERATING PROCEDURES Date: 11/01/06
Doc No.: NG-USA EOP D001 Page: 1 of 5 ELECTRIC OPERATING PROCEDURES SUBJECT: Cutouts Open/Enclosed Type SECTION: Distribution/Overhead REFERENCE: National Grid Retail Company Safety Manuals National Grid
More informationQPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems
Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route
More informationAPPENDIX D HYDRO-VAC
The City of Winnipeg Bid Opportunity No. 33-2018 Template Version: C420160226 - RW APPENDIX D HYDRO-VAC Corporate Safety & Health Division GUIDELINES FOR EXCAVATION OF CABLES BY WATER PRESSURE/VACUUM SYSTEMS
More informationCycling Device Training Manual
NRG POWER, INC. Industrial Electrical Contractors NRG POWER, INC. Phone: 714.424.6484 Industrial Electrical Contractors Fax: 714.424.6477 3011 South Shannon Street email: nrgpower@yahoo.com Santa Ana,
More informationAdvanced Pump Control for Irrigation Applications
Advanced Pump Control for Irrigation Applications Paul Nistler VFD Applications Engineer And Julian Atchia Director of Research and Development SJE Rhombus 22650 County Hwy 6 Detroit Lakes MN 56502 Executive
More informationSUBSTATION EXPLOSION BARRY GASS HIGH VOLTAGE TRAINING. Barry Gass Training Manager High Voltage Training South Africa
High Voltage Training Barry Gass Training Manager High Voltage Training South Africa BARRY GASS HIGH VOLTAGE TRAINING INTRODUCTION An authorised person closed an 11kV Oil Circuit Breaker (OCB) onto a fault
More informationPool Inspection. Your Street San Diego, California Prepared for: Your Name Prepared by: Priority Inspection Service
Pool Inspection Your Street San Diego, California 92106 Prepared for: Your Name Prepared by: Page 1 of 10 Table of Contents Standards of Practice 2 Definitions 3 General Information 3 General Pool Information
More information2 Sentry MCL Installation, Operation & Maintenance
Gas Liquid & Slurry Solid & Powder Steam & Water Installation, Operation & Maintenance Manual Original Instructions Liquid Sampling Manual Low-Emission Samplers S-GA-IOM-00249-7 11-17 Sentry MCL 966 Blue
More information