Presented By David F. Coble, MS, CSP. Safety Associates
|
|
- Rosemary Craig
- 6 years ago
- Views:
Transcription
1 OSHA Required Training Presented By David F. Coble, MS, CSP Coble, Taylor & Jones Safety Associates t
2 David F. Coble, MS, CSP 36 years of safety experience including 12 y y p g years with NC OSHA and 24 years in consulting and training OSHA Required Training and Inspections frequent training and speaking topic Professional Member of ASSE and Member of Standards Development Committee Director on the Board of Certified Safety Professionals Chair of ANSI B15.1 Committee
3 Other Resources The Safety Professionals Handbook Management Applications Section 4 Safety and Health Training and ASSE Webinar Provided on April 14, 2009
4 Goals Review OSHA Required Training Found in 1910 and 1926 Discuss Certification Records, Trainer Requirements and Subject Matter Review OSHA Expectations Found in OSHA Letters of Interpretation and My Own Experience
5 OSHA Required Training Number of OSHA Training and Inspection Requirements 190 General Industry Training Rules 140 Construction Training Rules 250 General Industry Inspection Rules 150 Construction Inspection Rules
6 For a Free Copy of CTJ Safety Associates Checklists OSHA Required Training for General Industry OSHA Required Training for Construction E Mail me at davidcoblecsp@aol.com
7 Approximately 730 OSHA 1910 and 1926 Standards That Require Training and Inspections (Not Counting The Standards Incorporated by Reference plus General Duty Obligations) Access to Records Aerial Lifts Bloodborne Pathogens Confined Spaces Ladders Scaffolds Signs and Tags Slings Welding
8 Nearly 200 Documents Incorporated by Reference Professional Organization s Documents (API, CGA, etc.) Welding Manuals Underwriter s Lab Standards Consensus Standards (ANSI, NFPA, etc.) For Example
9 Compressed Gas Assoc. Pamphlet P-1 Requires Training for Those Who Handle and Use Gas Cylinders (b)
10 Another Example, The Owner s Manual of the Welding Machine Requires Training (d)(6)
11 OSHA General Industry Vs. Construction Differences Scaffolds Construction has a training requirement General Industry does not The hazard is the same
12 General Industry Vs. Construction Differences Fall Protection Construction has a training requirement General Industry does not The hazard is the same.
13 General Industry vs Construction Differences Construction has Generic Training Requirements ( ) General Industry Does Not!
14 Many Standards Require Only Initial Training i Ladder Usage and Inspection [ ] Danger Signs and Tags [ (c)] 145(c)] Overhead and Gantry Crane Operators [ (b)(8)] 179(b)(8)] Sling Inspections [ (d)] Welding, Burning and Cutting [ ,.253 and.254 and (d) and.351(d)]
15 Some Standards Require Initial Training and Repeat Training if There are Problems or Changes Emergency Action Plans [ (f)] Personal Protective Equipment [ (f)(3)] )] Permit Confined Spaces [ (g)(2)] Powered Industrial Trucks [ (l)(4)] 178(l)(4)] Fall Protection [ (c)] For Example
16 Arrow indicates where the employee was pinned beneath the overhead canopy.
17 Was the floor of this trailer inspected before entry?
18 Could training for this worker be deficient? i
19 Could training for this worker be deficient? What if?? - Moving vehicles are present? - The weed eater throws a rock at him? - He stumbles upon a wasp nest? - It is a 104 F day?
20 A Few Standards Require Evaluation of Training and Then Followup If There are Problems Personal Protective Equipment [ (f)(3)] Confined Spaces Rescue [ (k)(1)(i)] Wheel Rims [ (c)(3)] For Example
21 Multi-Piece and Single Piece Rim Wheels 29 CFR
22 Multi-Piece and Single Rim Wheels Standard Includes: Large Trucks Buses Trailers Off-road Machines Does Not Include: Automobile Tires Light Truck Tires Designated LT
23 Mechanic Killed by Exploding Tire NIOSH FACE Report #05CA007 May 25, 2005 Apprentice mechanic checking air pressure on a military wheel Stood over the tire and used a wrench to adjust the bolts on the flange Tire exploded and killed mechanic
24 Multi-Piece and Single Piece Rims Multi-Piece: Inflate only if 80% inflated and using remote control inflation equipment, and out of trajectory Single Piece: Inflate only if all lug nuts fully tight
25 Multi-Piece and Single Rim Wheels Protection Restraining Device For Single or Multi-piece Barrier For Single Piece Only
26 Written Certification of Training There are about a dozen standards that require a written certification record of the training. This must include the employee s name, the signature of the trainer and the dates of the training. For example
27 Written Certification Record of Training About 25 Requirements Confined Spaces (g)(4) Fall Protection (b)(1) Building Powered Platforms (i)(1)(v) ) Process Safety Management (g)(3) Personal Protective Equipment (f)(4) Lockout (c)(7)(iv) Powered Industrial Trucks (l)(6) 178(l)(6) Telecommunications (c) Bloodborne Pathogens (h)(2)
28 Typical Certification Record CTJ Safety Associates FALL PROTECTION TRAINING ROSTER Certification of Training in Accordance with (b) Page 1 of 1 Date of Training Employee Name Work Location Initials Trainer s Signature: Date:
29 Requirement for Qualified Trainer About 12 Requirements Hazwoper (e)(3)(i) - (iii) Fall Protection (a)(2) Building Powered Platforms (i)(1)(iii) Scaffolds (a)(1) and (b)(1) Mobile Cranes (h)(3)(xii) Respirator Program Administrator (c)(3) Emergency Response (q)(7) Powered Industrial Trucks (l)(2)(iii) Overhead Cranes (n)(3)(ix) Bloodborne Pathogens (g)(2)(viii)
30 39 OSHA Standards Require Initial and Annual Training Hearing Conservation [ (k)(2)] Respirator Users [ (k)(5)] 134(k)(5)] Fire Extinguisher Users [ (g)] Access to Exposure and Medical Records [ (g)(1) and ] Bloodborne Pathogens [ (g)(2)]
31 Training Fundamentals Annual means every 365 days to OSHA OSHA has expectations for Computer Based training (OSHA Letter of Interpretation to Nancy Wickler dated January 15, 1999) Keep a record of all training indefinitely Train to a level so that the employee can do the job safely (i.e., electrical l work practices)
32 Different Levels of Training Would Be Expected (a) (a)(2)
33 Training Fundamentals Annual means every 365 days to OSHA OSHA has expectations for Computer Based training Keep a record of all training indefinitely Train to a level so that the employee can do the job safely (i.e., electrical l work practices) Your employees can not do effective inspections until they have been trained; for example
34 Inspecting Abrasive Wheels (d)(1) Before mounting: inspect closely l for damage perform sound- or ring-test to ensure free from cracks / defects To test: tap wheel gently with a light, non-metallic instrument if wheel sounds cracked or dead, do not use it because it could fly apart
35
36 In other words, there are quite a few regulatory required training topics! This must be managed. OSHA s Recommended Training Management System?...
37 OSHA s Voluntary Training Guidelines Issued July 27, 1984 (1) determine whether a worksite problem can be solved by training; g;( (2) determine what training, if any, is needed; (3) identify goals and objectives for the training;(4) design leaning activities; (5) conduct training; (6) determine the effectiveness of the training; and (7) revise the training program based on feedback from employees, supervisors, and others.
38 The ANSI/ASSE Z490.1 (2009) standard was developed to improve the consistency and quality of training development, delivery, evaluation and management.
39 1 st Key Issue for Effective Training Content What They Need to Know 1. Do a Needs Assessment Use the CTJ Safety Checklists on required training as a starting point, i.e.
40 1 st Key Issue for OSHA Required Training What They Need to Know 1. Do a Needs Assessment Use the CTJ Safety Checklists on required training as a starting point Walkthrough audits, interviews, incident reports, safety meeting minutes And, the following
41 Needs Assessment Use the Following Documents OSHA Standards State and Federal Consensus Standards Manufacturer s Instructions and Manuals Local Codes and Laws Association Guides
42 Content What They Need to Know 1. Needs assessment 2. Develop a matrix or chart of required training
43 Training Topics Details** Mechanics Helpers Machinists Aerial llifts H3W H, 3, Asbestos C, A, W Bloodborne Pathogens Burning/ Cutting CB, A, W H, I, P Chemicals CB, T, I, W Confined Spaces C, H, A, P Emergencies C, A, W Etc. From A to Z ** H = Hands On, T = Tool Box, C = Classroom, CB = Computer Based, A = Annually, I = Initially, 3 = Every 3 Years, W = Written Test, P = Practical Test
44 2 nd Key Issue for OSHA Required Training 2. Develop the training curriculum for each subject
45 ANSI Z490.1 Recommends Develop a written plan showing how the training i will be accomplished, the contents, delivery techniques, attendee participation, ii i etc.
46 ANSI Z490.1 Recommends Assess the competency of the trainers.
47 3 rd Key Issue for OSHA Required Training Develop a plan to assess how well the recipients of the training understood it.
48 Effectiveness of the Training Written tests Oral tests Demonstrations Supervisory observations Followup competency demonstrations
49 OSHA Has Cited Employers for Not Following the Guidance in ANSI Z490.1
50 Let s Review My Suggestion for the Top 5 Most Overlooked Training Requirements
51 Top 5 Overlooked Training Requirements 1. Access to Exposure and Medical Records (g) Required Annually What records are available How to get copies Must provide within 15 days
52 Top 5 Overlooked Training Requirements 1. Access to Exposure and Medical Records (g) Required Annually 2. Caution and Danger Signs and Tags (c)
53 Danger and Caution Signs and Tags (c) Danger Signs mean you do not proceed unless you are trained and authorized Caution Signs mean you may proceed but with a heightened sense of awareness
54 Top 5 Overlooked Training Requirements 1. Access to Exposure and Medical Records (g) 2. Caution and Danger Signs and Tags (c) 3. Lockout/Tagout -- All Others (c)(7)(i)(C)
55 Top 5 Overlooked Training Requirements 1. Access to Exposure and Medical Records (g) 2. Caution and Danger Signs and Tags (c) 145(c) 3. Lockout/Tagout All Others (c)(7)(i)(C) 147(c)(7)(i)(C) 4. First Aid (b) The 4 Minute Rule
56 Top 5 Overlooked Training Requirements 1. Access to Exposure and Medical Records (g) 2. Caution and Danger Signs and Tags (c) 3. Lockout/Tagout All Others (c)(7)(i)(C) 4. First Aid (b) The 4 Minute Rule 5. Electrical Safety Work Practices
57 Electrical Safety Work- Practices Applies to Both Qualified and Unqualified Personnel Train Employees to a Level That Each Can Work Safely Around Electricity
58 (b)(1)(ii) NFPA 99 Requires 4 ozs of Receptacle Tension (g)(2)(iii) Flexible Cords Must Have Strain Relief
59 (b)(1)(viii) Light Bulbs Within 8 of the Floor Guarded (g)(1) Proper Clearance in Front of Electrical Panels
60 (b)(2)(i) Faceplate Should Not be Broken (g)(5) Grounding Path Must be Continuous
61 (g)(1)(iv)(A) Flexible Cords Can Not be Used in Lieu of Fixed Wiring (b)(2) Electrical Equipment Used According to Listing or Labeling
62 In Summary Know what the regulations require regarding workplace training Develop a plan to train to a level that, at least, meets OSHA requirements Followup with employees to determine if the training was understood
63 Thank you! David Coble, MS, CSP CTJ Safety Associates
James J Arendas Ph.D.
James J Arendas Ph.D. Safety Program Elements Management Commitment Hazard Identification Hazard Correction Training Hazard Identification Qualified and Competent Persons Identify Hazards in the Workplace
MIOSHA Administrative Requirements. Chad Ignatowski
MIOSHA Administrative Requirements: Metal Fabrication Industry MIOSHA Administrative Requirements Chad Ignatowski Office: (616) 696-3887 Cell: (616) 240-2739 Email: Chad@AccessSafety.biz www.accesssafety.biz
Model Safety Program
Model Safety Program DATE: SUBJECT: Safety Procedures for Servicing Single and Multi Piece Rim Wheels. REGULATORY STANDARD: OSHA 29 CFR 1910.177 RESPONSIBILITY: The company Safety Officer is. He/she is
OSHA Federal Standards October 1, 2014 September 30, 2015
OSHA Federal Standards October 1, 2014 September 30, 2015 29 CFR 29 CFR 1910 1910. SUBPARTS MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN GENERAL INDUSTRY 2015 K N D S J O I Z O Z HAZARD COMMUNICATION WRITTEN
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
Creative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007
T h e D e l l G r o u p, I n c. Creative s o l u t i o n s for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised November
Harley-Davidson Motor Company
Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds
Creative Solutions for your compliance burdens
The Dell Group, Inc. Creative Solutions for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised September 2016 TRAINING
Access Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
Lockout/Energy Control
Lockout/Energy Control Presented By: Sotaris, LLP 2000 Auburn Drive, Suite 200 Beachwood, Ohio 44122 P: 216-378-7650 F: 866-794-5756 W: www.sotaris.com E: awj@sotaris.com 1 About Me Andrew W. Johnson,
Servicing Multi-Piece and Single Piece Rim Wheels Self Inspection Checklist
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Servicing Multi-Piece and Single Piece Rim Wheels Self Inspection Checklist Guidelines:
This written Compressed Gas Plan is kept at the corporate office and in the written Safety & Health Program.
Safety & Health Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 Compressed Gas Plan Purpose It is the policy of EMA to permit only trained and authorized
Access Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
Techniques for Hazard Recognition for the Field Employee
Session No. 611 Techniques for Hazard Recognition for the Field Employee David F. Coble, MS, CSP President Coble, Taylor & Jones Safety Associates Cary, NC Introduction Even within organizations with the
Written Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
OSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
SERVICING MULTI-PIECE AND SINGLE PIECE RIM WHEELS
Department of Military and Veterans Affairs Pennsylvania Army National Guard State Safety and Occupational Health Office Annville, PA 17003-5002 STANDING OPERATING 3 January 2008 PROCEDURES SERVICING MULTI-PIECE
Committed to Providing Quality Safety Products and Services. Online Training
Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to
SH&E Training Matrix (Americas, all Business Groups)
SH&E Training Matrix (Americas, all Business Groups) Employee Name: Location: Employee Number: Date: Table 1: All Employees 10 Hour Outreach Course (OSHA General Industry or Construction) 30 Hour Outreach
Responsibilities / Accountability
Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety
10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
http://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,
OSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
Elements of a Lockout/Tagout Program OSHA
September 15, 2015 Elements of a Lockout/Tagout Program OSHA 1910.147 Dayna Noble Industrial Safety Consultant Specialist Ohio BWC 567-204-8917 Dayna.noble@bwc.state.oh.us Top 10 most frequently cited
9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR
New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information
Self Inspection Checklist
Self Inspection Checklist Name: Date: Job Name: Title: Time: Job Number: Instructions: Review each lettered subpart under each section that you are responsible for completing. If you have inspected all
Section 35 Brieser Construction SH&E Manual
Brieser Construction SH&E Manual August 2017 Assure that employees handling compressed gases are adequately trained in the inherent hazards of the cylinders and their contents, as well as proper handling,
Fall Hazards: One of OSHA s Big Three. By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION
OPTIMUM Articles Provided by www.optimumresultsusa.com Fall Hazards: One of OSHA s Big Three By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION In 2010, the Bureau of Labor Statistics (BLS) reported
OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: TSMF REVISED: 09-11-09 The following summarizes the orientation requirements for new employees at the facility. This plan augments the company
Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted
A Different Sort Of Knowledge Box
The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard
Aerial Lift Safety Program
Aerial Lift Safety Program Revision Date: 6-19-2017 TABLE OF CONTENTS Aerial Lift Safety Program 1.0 Overview... 3 2.0 Policy......3 3.0 Requirements. 3 4.0 Purpose..... 4 5.0 Scope.........4 6.0 Responsibilities........7
There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
Authorized Outreach Trainer Update. November 28, 2017
Authorized Outreach Trainer Update November 28, 2017 1 Breakdown of Topic Hours by Class Type 2 Link to Trainer Portal: https://outreachtrainer.gatech.edu/ Questions about using the website, submitting
WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST
Windmill Hazard Inspection Checklist WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Authorised by: LOCATION OF INSPECTION...... Inspected By (1)........... (2)..... PRINT PRINT Signature (1):. (2)....
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
Electrical. Version 1.0
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
ARKANSAS TECH UNIVERSITY FACILITIES MANAGEMENT HEALTH AND SAFETY MANUAL (LOCKOUT/TAGOUT) 30.0
() 30.0 The purpose of the Energy Control Policy (Lockout/Tagout) is to ensure that before any employee performs any servicing and/or maintenance on machinery or equipment, where the unexpected energizing,
Respiratory Protection
Respiratory Protection Purpose The purpose is to establish a set of guidelines for the selection of respiratory protection equipment, situations for its use, and training in the use of the respirator required.
Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t
JO CHESM Field Inspection Checklist Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t This checklist provides a format for the recording of observations at work sites visited during the inspection.
SafeLandUSA - Syllabus
1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION Revised July 2015 COURSE INFORMATION This course description catalog describes courses offered by or through the Department of
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
GIVE ME FIVE VIDEO EXCHANGE CLUB
GIVE ME FIVE VIDEO EXCHANGE CLUB The following programs are available to club members on DVD. An (S) beside a title denotes availability in Spanish. ATTITUDES & MOTIVATION 4778 Take Action To Avoid Distraction
Return the completed questionnaire, OSHA 300A Summary form and EMR Rating via e- mail.
EHS CONTRACTOR SAFETY It is the Mission of Olin Brass to Create an environment of safety excellence where an injuryfree work place is achieved through continuously confronting and correcting unsafe conditions
Risk Management Resources
Risk Management Resources Machine Guarding Name: Notes: Electrical Systems: Fire Prevention Are circuit breakers accessible to personnel, protected from physical damage, and located away from ignitable
OSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
2. What is the definition of an electrocution hazard? a. Electrocution results when a person is exposed to a lethal amount of electrical energy
Electrocution Hazards Lesson Plan Sample Lesson Plan In This Document Construction Training Program (10-hour) Overview The purpose of this lesson is to provide workers with information that will enable
Authorized Outreach Trainer Update. July 10, 2014
Authorized Outreach Trainer Update July 10, 2014 1 If you have questions during the webinar, use the Chat. Your questions will either be answered during the webinar, if time allows, or will be answered
Staffing Services Client Evaluation Form
Staffing Services Client Evaluation Form Client Name: Location: Contact(s): Completed By: A Safety Performance Experience Modification Factor? OSHA 300 Logs Available? # Of Injuries/Illnesses? Types of
A. Evaluation of the written program
A. Evaluation of the written program Begin your audit with an evaluation of the written respiratory protection program. In addition to the operating procedures describing respirator selection and use in
Telecommunication Tower Technician Course Descriptions
Telecommunication Tower Technician Course Descriptions Developed by: TES, Inc. 10909 Murdock Drive Knoxville, TN 37932 800-327-4036 O*NET-SEC CODE: 49-2021.00 RAPIDS CODE: 2030CB Approved By US Department
Quality Companies USA TRAINING SYLLABUS
Quality Companies USA TRAINING SYLLABUS Quality Companies USA Quality Companies USA HSE / Training Group 425 Griffin Road Youngsville, LA 70592 (337) 857-6000 All right reserved. No part of this publication
On-Demand SAFETY Learning Library Catalog
On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com
OSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None
Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,
PRINTED COPY IS NOT CONTROLLED Page 1 of 22
The current (electronic) copy of this procedure is found at: Z:/ISDC Procedures and Forms/Current/ (Revision History/Approvals is on last page) 1. PURPOSE The following guidelines are intended to help
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON SCENIC LAB SAFETY PROCEDURES (CPAC 154) 1. POLICY The Department Scenic Lab is a facility, which supports courses in scenic design
Walking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments
Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness
January 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable!
January 25, 2011 TO: Our Clients FROM: Will Johnson, Corporate Training Director SUBJECT: Increase your bottom line, safety is profitable! Ladies and Gentlemen: Workplace injuries and illnesses are preventable
SAFETY TRAINING and SERVICES CONFINED SPACE FALL PROTECTION EXCAVATION FORKLIFTS SCAFFOLD. Rescue. Spring D2000 Safety: Key Facts
TM SAFETY TRAINING and SERVICES CONFINED SPACE FALL PROTECTION D2000 Safety: Key Facts EXCAVATION Founded in 1993 and located in Eugene, Oregon, we provide training for workers in high-hazard environments
The Best Use of Lockout/Tagout and Control Reliable Circuits
Session No. 565 The Best Use of Lockout/Tagout and Control Reliable Circuits Introduction L. Tyson Ross, P.E., C.S.P. Principal LJB Inc. Dayton, Ohio Anyone involved in the design, installation, operation,
Electrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
CONTRACTOR SAFETY RULES
CONTRACTOR SAFETY RULES CONTRACTOR SAFETY RULES AND REGULATIONS This manual sets forth policy with regards to contractor safety. Each Quinn facility consists of one or several diverse operations under
EHS Solutions Based in Reality
ETC Compliance Solutions Corporate Office Remittance Address: 5532 E. Grant Rd., AZ 85712 PRSRT STD US POSTAGE PAID, AZ Permit #2216 Serving clients in Arizona & around the world! Site-Specific Training
Job Hazard Analysis. University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195
Job Hazard Analysis University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195 Working Job Title: Utility Worker 2 (CEO) JHA Completed by Date: The Job
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED:
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED: 09-11-2009 The following summarizes the orientation requirements
NSC Online Workplace Training
ACCIDENT INVESTIGATION What is an Accident Investigation? Learn why an accident investigation is conducted and how to plan the investigation. Importance of gathering information Conducting an effective
RISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
Personal Protective Equipment (PPE) Hazard Assessment Certificate Instructions
Personal Protective Equipment (PPE) Hazard Assessment Certificate Instructions Based on the NIOSH hierarchy of controls, PPE is a last resort. Personal protective equipment alone should NOT be relied upon
OSU - COLLEGE OF FOOD, AGRICULTURAL AND ENVIRONMENTAL SCIENCES OSHA COMPLIANCE SELF-INSPECTION CHECKLIST
OSU - COLLEGE OF FOOD, AGRICULTURAL AND ENVIRONMENTAL SCIENCES OSHA COMPLIANCE SELF-INSPECTION CHECKLIST INSPECTED BY: BUILDING: ROOM: DATE: YES NA NO COMMENTS Recordkeeping / Safety Training Are all occupational
Welding and Cutting (Hot Work) Operations Self-Audit Checklist. Building Room Supervisor Date
Welding and Cutting (Hot Work) Operations Self-Audit Checklist Building Room Supervisor Date Audit Performed by A. General Welding and Cutting Controls 1. Welding and cutting operations restricted to authorized
Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities
OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio
Suitability of Work Equipment
These regulations came into effect on the 5th December 1998 and replace PUWER 1992. They cover almost all equipment used at work, including tool box tools such as hammers, knives etc. They also cover machinery
Pannier Corporation Health and Safety Handbook Marking System Group Aerial Lifts Original Date: Section: Revision date: Page: 12/5/ of 11
12/5/2013 37 1 of 11 1.0 Overview Aerial lifts are commonly used in construction, inspection, athletic events and repair services to lift Pannier employees to an elevated work position. Proper operation
List all key terms and acronyms used in the procedure, and their definitions.
Purpose The purpose of this procedure is to provide guidelines for electrical safety in general within Seqwater in compliance with the Electrical Safety Act 2002, Industry Codes of Practice, Regulations,
Safety & Equipment Training Courses Field Inspection Programs
www.wisesafetyenv.com & 2016 Safety & Equipment Training Courses Field Inspection Programs Ask how we can CUSTOMIZE your training program(s)! David Cook Occupational Safety & Health Compliance Specialist
KEY. DVD Item # Single Student Online Video Course Item # Instructor Streaming Video Course Item # Interactive Online Item # Length of DVD Program
A KEY DVD Item # Single Student Online Video Course Item # Instructor Streaming Video Course Item # Interactive Online Item # Length of DVD Program Available Languages: E/S - English and Spanish Combo
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
Management Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
Section 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
Session Topics. Industrial Hygiene from an OSHA Perspective. Health Hazards in Shops. Labeling Example 1/27/2014. Shop Safety: Health & Ventilation
Session Topics Shop Safety: Health & Ventilation UW Extension Webinar January 28, 2014 Mary Bauer CIH, CSP Compliance Assistance Specialist Eau Claire, WI 54701 715-832-9019 1. Organization walk paths,
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
SAFETY AND RESCUE TRAINING FOR HIGH-HAZARD ENVIRONMENTS
SAFETY AND RESCUE TRAINING FOR HIGH-HAZARD ENVIRONMENTS SAFETY TRAINING Confined Space Fall Protection Excavation/Trench Forklift/Telehandler RESCUE TRAINING Confined Space Rescue Tower Rescue Surface
THE UNIVERSITY OF NORTH CAROLINA
THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL CHILLED WATER DEPARTMENT ENERGY CONTROL PROCEDURE The purpose of this document is to establish minimum requirements for the manual isolation and securing
Fall Protection ABC s
Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall
FALL PROTECTION PROGRAM (OHS-0010)
() For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7
Online Course and Lesson Objectives
Online Course and Lesson Objectives 2 0 0 6 - No Downtime - No Travel Expenses - Available 24/7 - Customization - High Retention - Scalability Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3
2106 PEDESTRIAN SAFETY IN INDUSTRY
ERI Safety Videos Videos for Safety Meetings 2106 PEDESTRIAN SAFETY IN INDUSTRY Leader s Guide 2000, ERI PRODUCTIONS INC. PEDESTRIAN SAFETY IN INDUSTRY This easy-to-use Leader s Guide is provided to assist
Accident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
EM Section 12. Control of Hazardous Energy (Lockout/Tagout)
EM 385-1-1 Section 12 Control of Hazardous Energy (Lockout/Tagout) Lockout/Tagout References EM 385-1-1 Section 12 29 CFR 1926.600 (a) (3) i Heavy Equipment 29 CFR 1926.702 (j) (1) Concrete Tools 29 CFR
ONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
SAFET Y TR AINING CATALOG
SAFET Y TR AINING CATALOG CO R P O R AT E A N D CO M M U N I T Y S ERV I CES D IV I S I O N www.monroeccc.edu MCCC Mission Statement Monroe County Community College provides a variety of higher education
What Every Town Manager Needs to Know About Workplace Safety
What Every Town Manager Needs to Know About Workplace Safety Presented to: Massachusetts Municipal Association Annual Meeting & Trade Show January 23, 2016 Mary Dozois, CIH Department of Labor Standards