Lyman. Case Prep Xpress TM. Operating Instructions. Lyman. 475 Smith Street Middletown, CT
|
|
- Silvester Tyler
- 6 years ago
- Views:
Transcription
1 Lyman Case Prep Xpress TM Lyman 475 Smith Street Middletown, CT Part # Rev. 04/16 Operating Instructions
2 WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. To reduce the risk of injury, user must read instruction manual CARE AND MAINTENANCE The Lyman Case Prep Xpress center is designed to provide years of service with minimal maintenance. The Xpress can be wiped occasionally with a damp cloth. Do not use any harsh cleaning products or solvents on unit. A removable brass shaving dump pan is included. The build up of brass shavings will occur around the tools and should be brushed off with the supplied brush. After using tools in the revolving tool stations, they may become quite tight. You may need to hold onto a tool in another station to keep from turning the motor when a tool is removed. HANDLING CAUTION FOR MOTOR MICA CASE LUBE CAUTION: Do not inhale dust and avoid contact with eyes. Prolonged inhalation may be unhealthy. Use in adequately ventilated areas only. Always wear eye protection while handling. Wear ear protection Wear eye protection Double insulation Warning: Do not expose to rain or use in damp locations FIRST AID PROCEDURES: In case of eye contact, flush immediately with plenty of water. If irritation occurs seek medical attention. In case of inhalation seek fresh air; if irritation occurs seek medical attention. OSHA/HMIS Label Health: 0 Flammability: 0 Reactivity: 0 Max. Personal Protection: E Before any work on the machine itself, pull the power plug from the outlet Wear protective gloves 2 11
3 Primer Pocket Cleaner Small and Large: Quickly removes fouling out of primer pocket bottoms. Lightly press case over tool (approx. 2-3 seconds) until fouling is removed. CASE NECK BRUSHES The following case neck brushes can be installed in the six storage stations located on either side of the unit. CASE NECK BRUSH (.25 Cal.): Allows cleaning of case necks up to.25 caliber CASE NECK BRUSH (.30 Cal): Allows cleaning of case necks from.26 to.30 caliber CASE NECK BRUSH (.38 Cal): Allows cleaning of case necks from.31 to.38 caliber CASE NECK BRUSH (.45 Cal): Allows cleaning of case necks from.38 to.45 caliber Case Neck Lube Dry (Motor Mica): Motor Mica is a dry lubricant that can be used to ease the passage of the resizing die s expander button. Pour small amount of Motor Mica supplied in a small plastic vial into round recess on edge of unit. Once you have used the appropriate brush to clean your case neck dip the case neck into Motor Mica and tap off any excess. NOTE: this operation should be done prior to decapping and sizing. SPECIFICATIONS Voltage - 230V, 120V +/-10% Frequency - 50/60 Hz Operating Current FLA Power Weight of unit Speed of spindle RPM NOISE and VIBRATION INFORMATION A weighted sound pressure LpA: db (A) A weighted sound power LwA: db (A) KpA&KwA: db (A) Wear ear protection when sound pressure is over: 80dB (A) The total vibration value is not exceeding 2.5m GENERAL INFORMATION Congratulations on the purchase of your new Lyman Case Prep Xpress TM. Lyman, the industry innovator in case preparation for decades, has produced the most complete electric case prep system ever developed. The Case Prep Xpress is the only All-Inclusive System offering all the most popular case prep accessories. It features a compact, space-saving housing containing a powerful, hightorque gear motor. The Case Prep Xpress allows the user to simultaneously do 5 different case prep operations. Removable dump pan provides easy clean up of brass shavings. The best part is that all accessories are included from the start, no need to have to separately purchase expensive additional accessories. 10 3
4 Figure #1 Need photo of box with top open showing the contents on top of packing material. UNPACKING AND SETUP INSTRUCTIONS Figure #1 shows your Case Prep Xpress in its original packaging. On top is your instruction booklet and accessory kit. Make sure all the included accessories are accounted for before going any further. The kit includes: 1 Inside Deburr (VLD) Tool 1 Outside Deburr Tool 1 Primer Pocket Uniformer (S) 1 Primer Pocket Uniformer (L) 1 Primer Pocket Reamer (S) 1 Primer Pocket Reamer (L) 1 Primer Pocket Cleaner (S) 1 Primer Pocket Cleaner (L) 1 Case Neck Brush (25 Cal) 1 Case Neck Brush (30 Cal) 1 Case Neck Brush (38 Cal) 1 Case Neck Brush (45 Cal) 1 Case Neck Lube (Mica) Once you have verified the contents of the accessory kit you may remove the top packing material. You can now remove the unit from the box and inspect for any damage. Place your Case Prep Xpress unit on a smooth flat surface for use. 4 Primer Pocket Uniformer Small and Large: The Lyman Primer Pocket Uniformer Tool is designed to cut primer pockets to a uniform depth that can produce more consistent ignition and lead to greater accuracy. The Primer Pocket Uniformer cuts to a uniform depth and at the same time squares the seating surface for the anvil of the primer. Primers are constructed so that the anvil protrudes slightly from the open end of the primer cup. This is necessary so that the anvil will rest firmly on the bottom of the primer pocket. When the firing pin strikes the primer, the impact sensitive compound inside the primer is crushed between the anvil and cup causing the compound to ignite. Variations in the depth or configuration of the primer pocket, or in the primer seating operation itself, can alter the effects of the firing pin blow. This, in turn, effects the ignition of the primer and may affect the accuracy of the cartridge. The Uniformer Tool is factory set to S.A.A.M.I. specifications and is fixed in place. NO ADJUSTMENTS ARE NEEDED OR SHOULD BE ATTEMPTED! To use the Primer Pocket Uniforming Tool, insert into the primer pocket of an empty, deprimed case. Be sure to hold the case straight in line with the Uniforming Tool. Hold case over tool while applying light pressure. Hold case over cutter and remove material until the head of the case makes contact squarely against the shoulder on the Uniformer Tool. Remove the case from the cutter and check the pocket for brass shavings. Remove any shavings that are found. If no material is removed, the pocket is already at the correct depth. Military cases have crimped-in primers. Lyman's Primer Pocket Reamer should be used first to remove the crimp and then the Uniformer Tool can be used as described above. WARNING: Large Rifle and Large Pistol Primers have different pocket depths. Do not use the Large Rifle Uniformer in pistol cases. Holding the Uniforming Tool at an angle in the primer pocket could enlarge the pocket and cause gas leakage. Keep tool square and in-line with the case. Primer Pocket Reamer Small and Large: Removes military crimps and rough metal edges from primer pockets. The tool requires only a few seconds to work properly. Be sure to hold case square with the reamer. Holding unit at an angle in the primer pocket could enlarge the pocket and cause gas leakage. 9
5 e. Do not use the tool if the switch does not turn it on and off.!! WARNING!! 1. The use of any accessory or attachment other than one recommended in this instruction manual may present a risk of personal injury. 2. Have your tool repaired by a qualified person 3. This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. 4. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. OPERATING THE XPRESS You may install your case prep tools in any of the 5 different stations on the unit to meet your specific needs for case preparation. Case prep tools simply thread into the tool stations on the top of unit. They will accept any case tools using an 8-32 thread. INDIVIDUAL TOOL INSTRUCTIONS Inside Deburr (VLD) Tool: This tool eliminates damage caused by sharp edges on the case neck. It cuts a gentle 22 degree chamfer on the case mouth allowing bullets to easily enter the cartridge. This tool only requires a few seconds to properly function. Do not over cut brass as this will lead to thin weak necks. Works on cartridges from 17cal. - 45cal. Outside Deburr Tool: This tool removes excess brass from trimmed cases. The tool easily deburrs the outside case mouth to leave a smooth even finish. This tool only requires a few seconds to properly function. Do not over cut brass as this will lead to thin weak necks. Works on cartridges from 17cal. - 45cal. IMPORTANT Before using your Lyman Case Prep Xpress read all operating instructions prior to getting started. This instruction manual should be kept with your Case Prep Xpress center so that it may be used for reference in the future. If after reading all user instructions you still do not understand the unit s operation please contact Lyman customer service at LYMAN for further assistance. At Lyman, customer satisfaction and quality are our top priorities. If you are experiencing any problem with this product, DO NOT RETURN IT TO YOUR RETAIL- ER. Please, let us help. If the item has a missing part, is damaged, or if you need help with the instructions, call us toll-free at LYMAN(59626) Mon-Fri 9:00am to 4:15pm (EST) or go to our website at and click on the Quick Link at the bottom right that says Contact Us. WARNINGS 1. Warning! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions 2. Remove plug from electric outlet when not in use. 3. Do not use the tumbler near a tub or sink where it could fall into water. 4. Do not leave the tumbler running unattended. 5. Do not touch rotating components. 6. Only connect the cord to a properly grounded electrical outlet. 7. Turn the control to the OFF position before removing tools from the spindles. 8. Keep hands, hair or loose clothing away from the rotating components. 9. Do not operate on carpet, only on a hard flat floor surface. 10. Do not work on loaded ammunition or cases with live primers. 11. For adult use only; keep away from children. 8 5
6 12. Keep work area clear a. Cluttered areas and benches invite injuries. b. Consider your work environment when operating this unit 14. Do not expose tools to rain. 15. Do not use tools in damp or wet locations. 16. Keep work area well lit. 24. Secure work a. Where possible use clamps or a vice to hold the work. It is safer than using your hand. 25. Do not overreach 26. Keep proper footing and balance at all times. 27. Follow instruction for lubricating and changing accessories. 17. Do not use tools in the presence of flammable liquids or gases. 18. Guard against electric shock a. Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators). 19. Keep other persons away a. Do not let persons, especially children, not involved in the work touch the tool or the extension cord and keep them away from the work area 20. Tooling a. Store idle tools in a safe location without power. b. When not in use, tools should be stored in a dry locked-up place, out of reach of children. c. Keep cutting tools sharp and clean for better and safer performance. d. Maintain tools with care e. Do not force the tool f. It will do the job better and safer at the rate for which it was intended. g. Use the right tool for the job. h. Do not force small tools to do the job of a heavy duty tool. i. Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs. 21. Dress properly a. Do not wear loose clothing or jewelry, they can be caught in moving parts. b. Non-skid footwear is recommended when working outdoors. c. Wear protective hair covering to contain long hair. 22. Use protective equipment a. Use safety glasses. b. Use dust mask if working operations create dust. 23. Do not abuse the cord a. Never yank the cord to disconnect it from the socket Keep the cord away from heat, oil and sharp edges. 28. Inspect tool cords periodically and if damaged have them repaired by a factory authorized service facility. 29. Inspect extension cords periodically and replace if damaged. 30. Keep handles dry, clean and free from oil and grease. 31. Disconnect tools a. When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools from the power supply. 32. Remove adjusting keys and wrenches a. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. 33. Avoid unintentional starting a. Ensure switch is in "off position when plugging in 34. Use of outdoor extension leads a. When the tool is used outdoors, use only extension cords intended for outdoor use and so marked. 35. Stay alert a. Watch what you are doing, use common sense and do not operate the tool when you are tired. 36. Check damaged parts a. Before further use of tool, it should be carefully checked to determine that it will operate properly and perform its intended function. b. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. c. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated in this instruction manual. d. Have defective switches replaced by an authorized service center. 6 7
3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationNOTE: Parts are no longer available for this tool. The manual will continue on the next page.
NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form Z455 Date 12-97/D Page 1 of 6 INSTRUCTIONS & PARTS LIST FOR SIOUX 8200 POLISHER GENERAL SAFTEY RULES READ
More information1 DRIVE INDUSTRIAL IMPACT WRENCH
1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationAIR INLINE METAL SHEAR
AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More information1/4 SHEET PALM SANDER
1/4 SHEET PALM SANDER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationINTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationOWNER S MANUAL. Page: 1 of 8
Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationG10K - 1/2" Heavy-Duty Air Impact Wrench
G10K - 1/2" Heavy-Duty Air Impact Wrench OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationTEM# Air Hammer Combo USER'S MANUAL
Air Tools TEM# 40 Air Hammer Combo USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions
More informationComposite Pistol-Type Air Needle Scaler OWNER S MANUAL
Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS
AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight
More information1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS
1/2 Twin Hammer Composite Air Impact Wrench 95098 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationCOMPACT METAL bender 99826
COMPACT METAL bender 99826 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationOPERATORS MANUAL MODEL 365 BACK LAPPING MACHINE WARNING
MODEL 365 BACK LAPPING MACHINE OPERATORS MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety instructions.
More information1/4 Air Ratchet Wrench
/4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationPS Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions
PS07569 201412 Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation
More informationHeavy-Duty Hot Knife
Heavy-Duty Hot Knife Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095
10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationATD LB PRESSURE BLASTER INSTRUCTION MANUAL
ATD-8402 90LB PRESSURE BLASTER INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS FOR SANDBLASTER 1. Before opening the tank release the air pressure on the sand tank. To do this, turn off
More informationHEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL
HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More information12" Electric Grass Trimmer & Edger Instruction Manual
Power Glide Limited Warranty Consumer Power Tools for Home Use World Factory, Inc. (Seller) warrants to the original Buyer only, that each POWER GLIDE portable power tool will be free from defects in material
More information1/2 in. AIR IMPACT WRENCH (TWIN HAMMER)
1/2 in. AIR IMPACT WRENCH (TWIN HAMMER) WARNING Read Operator s Manual. Do not operate equipment until you have read this Operator s Manual for Safety, Assembly/Operation and Maintenance Instructions.
More informationAIR COMPRESSOR 12V INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au AMC-3000 WHAT S IN THE BOX. Mini Compressor. Accessories x 3
WHAT S IN THE BOX AIR COMPRESSOR 12V INSTRUCTION MANUAL SPECIFICATIONS Voltage: 12V Max Current: 14Amp Max Pressure: 15psi Flow Rate: 35 L/min Hose Length: 1.5m Weight: 1.8kg ozito.com.au Mini Compressor
More informationIMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS
1 / 2 COMPACT AIR TWIN HAMMER IMPACT WRENCH 94802 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationTRI- B A L L H I TC H OWNER S MANUAL
TRI- B A L L H I TC H OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationHole cutter. Model 97194
Hole cutter Model 97194 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationMODEL H8214 AIR BODY SAW INSTRUCTION MANUAL
MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL COPYRIGHT SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL
More informationCopyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written
MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form
More information3 AIR HIGH SPEED CUTTER
3 AIR HIGH SPEED CUTTER 90114 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationMODEL H RPM
MODEL H8217 3 8" REVERSIBLE ANGLE DRILL 0 1500 RPM INSTRUCTION MANUAL COPYRIGHT AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
More informationAIR HAMMERS MODEL NO: CAT138/CAT139 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: / GC064
AIR HAMMERS MODEL NO: CAT138/CAT139 PART NO: 3120152 /3120153 OPERATING & MAINTENANCE INSTRUCTIONS GC064 INTRODUCTION Thank you for purchasing this CLARKE Air Hammer. Before attempting to use this product,
More informationTelescopic Hedge Trimmer
Product Code: M951817 Telescopic Hedge Trimmer INSTRUCTION MANUAL Please retain for reference 1 Contents I. Technical Data... 3 II. Intended Use... 3 III. Explanation of Symbols on your product... 4 IV.
More informationCopyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written
MODEL G5789/G5790 13-PIECE 3 4" IMPACT WRENCH KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the
More informationSoot Buster. Operating and Maintenance Instructions. M
Soot Buster M5784-00 Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com TABLE OF CONTENTS Introduction... 4 Safety
More informationCOMPRESSOR AND INFLATOR WITH TORCH
WHAT S IN THE BOX COMPRESSOR AND INFLATOR WITH TORCH 12V INSTRUCTION MANUAL SPECIFICATIONS Voltage: 12V Max Current: 10Amp Max Pressure: 150psi (10.3bar) Max Flow Rate: 16l/min Weight: 1.21kg ozito.com.au
More informationSOVEREIGN W Electric Hover Mower (Model: MEH929)
SOVEREIGN 2907857 900W Electric Hover Mower (Model: MEH929) Instruction Manual After Sales Support UK/Ireland 0345 640 0800 Web www.argosspares.co.uk Important - Please read these instructions fully before
More informationAir Hammer Model 32940
Air Hammer Model 32940 Assembly and Operation Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
More informationStorage Shelving. User Manual [Revision 3.0 May 2017]
User Manual [Revision 3.0 May 2017] READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. KEEP THIS MANUAL FOR FUTURE REFERENCE. Products covered
More informationINSTRUCTION MANUAL GUIDE D'UTILISATION
INSTRUCTION MANUAL GUIDE D'UTILISATION MANUAL DE INSTRUCCIONES INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. SI TIENE
More informationModel ASSEMBLY and OPERATING INSTRUCTIONS
QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationROTARY HAMMER DRILL 650W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au RHD-2100 WHAT S IN THE BOX. Rotary Hammer Drill. Side Handle.
WHAT S IN THE BOX ROTARY HAMMER DRILL 650W INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Speed: Impact Rate: Impact Energy: Accessory Fitment: Drilling Capacities: Net Weight: ozito.com.au 650W 1,000
More informationREVERSIBLE AIR DRILL
REVERSIBLE AIR DRILL MODEL NO: CAT87 PART NO: 3110835 OPERATING & MAINTENANCE INSTRUCTIONS GC0613 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill Before attempting to use this product,
More information2 Gallon, 100 PSI Oilless
2 Gallon, 100 PSI Oilless Air Compressor Model 47407 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationMODEL 300 BACKLAPPER OWNERS MANUAL
MODEL 300 BACKLAPPER OWNERS MANUAL Neary Technologies 1173 Benson Street River Falls, WI 54022 1 Manual No. 30019 (7-07) SAFETY INSTRUCTIONS Safety Awareness Symbols are inserted into this manual to alert
More informationSTRIBOG GRAND POWER. The INSTRUCTIONS FOR USE, MAINTENANCE AND SAFETY. 1
instructions The for use, maintenance STRIBOG and safety hestribog GRAND POWER INSTRUCTIONS FOR USE, MAINTENANCE AND SAFETY www.grandpower.eu 1 The STRIBOG Dear Customer, Thank you for purchasing a semi-automatic
More informationMANUAL DE INSTRUCCIONES
328521-01/DW624 9/6/01 8:00 AM Page 3 INSTRUCTION MANUAL GUIDE D UTILISATION MANUAL DE INSTRUCCIONES INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
More informationModel Visit our website at:
6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationAIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC05/14
AIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 PART NO: 3110400 & 3110846 OPERATING & MAINTENANCE INSTRUCTIONS GC05/14 INTRODUCTION Thank you for purchasing this CLARKE Air-Powered Ratchet Wrench. Before
More informationHedge Trimmer 520W. Operating Instructions XHT-450. XU1 Power tools
Operating Instructions XHT-450 520W Hedge Trimmer XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 = = = = Telephone: 1800 069 486 Website: www.xuone.com.au XHT-450 0516 SAFETY INSTRUCTIONS
More informationModel Air Caddy Orig TABLE OF CONTENTS
92-0919 Orig. 020201 Model 75-0114 Air Caddy TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 SPECIFICATIONS 7 MAINTENANCE 9 INSTALLATION AND OPERATION 11
More information3/8 ANGLED AIR DRILL
3/8 ANGLED AIR DRILL MODEL NO: CAT61 PART NO: 3110461 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angled Air Drill. Before attempting to use this product,
More informationAngled Sign Light with Shade
Angled Sign Light with Shade Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationRight-Angle Tube Roller Model
SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.
More informationRANGER PRO 12V AIR COMPRESSOR 560W RANGER PRO 12V AIR COMPRESSOR LPM MOTOR 150PSI MAX K13010 COILED AIRHOSE. ED1 July 17 POWERFUL DEFLATOR FUNCTION
RANGER PRO 12V AIR COMPRESSOR 169 LPM MAXIMUM 150PSI MAX WORKING PRESSURE 8M COILED AIRHOSE POWERFUL 560W MOTOR DEFLATOR FUNCTION K13010 ED1 July 17 Table of Contents Know Your Product...1 General Safety
More informationINFLATE-IT COMPRESSOR KIT
WHAT S IN THE BOX INFLATE-IT COMPRESSOR KIT 1100W INSTRUCTION MANUAL SPECIFICATIONS Motor: 1100W (S3 15%) No Load Speed: 3,450/min Max. Pressure: 8 bar (116psi) Theoretical Air Intake:190 l/min IP Rating:
More informationProduct Safety Information
16609604 Edition 1 May 2008 Fixtured Air Drill Product Safety Information Save These Instructions EN Product Description A Fixtured Air Drill is a compressed air powered, rotary power tool whose output
More information1/2 CROWN AIR STAPLER
1/2 CROWN AIR STAPLER Model 54753 ASSEMBLY AND OPERATION INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND
More informationDigital Mini Compressor 12V
Digital Mini Compressor 12V Instruction Manual 3 Year Replacement Warranty DMC-012! WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
More information1/2 DRIVE AIR IMPACT WRENCH
1/2 DRIVE AIR IMPACT WRENCH 2 YEAR WARRANTY 1110NM MAX TORQUE LOW AIR CONSUMPTION TWIN HAMMER MECHANISM K13204 ED2 Sept 15 Table of Contents 1/2 DRIVE AIR IMPACT WRENCH Know Your Product...1 General Safety
More informationANGLE DIE GRINDER SET
ANGLE DIE GRINDER SET MODEL NO: CAT65 PART NO: 3110725 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angle Die Grinder Set. Before attempting to use this
More information60 Drum Style Spike Aerator
60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information12" 8A Electric Snow Shovel
12" 8A Electric Snow Shovel 2600802 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. CONTENTS Contents... 2...
More information12 Inch Barn Light. Owner s Manual
12 Inch Barn Light Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationDUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211
DUAL ACTION SANDER MODEL NO: CAT121 PART NO: 3110877 OPERATION & MAINTENANCE INSTRUCTIONS LS0211 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please
More informationORBITAL AIR SANDER. Owner s Manual
ORBITAL AIR SANDER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationINFLATE-IT COMPRESSOR KIT
WHAT S IN THE BOX INFLATE-IT COMPRESSOR KIT 1100W INSTRUCTION MANUAL Air Compressor SPECIFICATIONS Power supply: Motor: No Load Speed: Max. Pressure: Max. Flow Rate: IP Rating: Product weight: 230 240V
More information[ACT 005] Manual E 5/25/05 9:24 PM Page 3 MULTI-FUNCTION
[ACT 005] Manual E 5/25/05 9:24 PM Page 3 MULTI-FUNCTION Air Compressor OWNER S MANUAL MODEL NO: RCP-C62A KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL THOROUGHLY
More information6 DUAL ACTION AIR SANDER
6 DUAL ACTION AIR SANDER Model 42966 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ
More informationModel OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein.
2 GALLON 1.5 HP AIR COMPRESSOR Model 94724 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationINDUSTRIAL - SOLVENT PARTS CLEANER
INDUSTRIAL - SOLVENT PARTS CLEANER OPERATION & INSTRUCTION MANUAL I. Introduction A. Manufacturer s Statement CM400 This manual will provide you with important information about the Solvent Parts Cleaners
More informationFLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS
FLOOR STAPLER WITH HAMMER Model 93197 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight
More informationHEAVY DUTY HOT KNIFE
HEAVY DUTY HOT KNIFE 66182 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More information1/2 REVERSIBLE AIR DRILL
1/2 REVERSIBLE AIR DRILL MODEL NO: CAT60 PART NO: 3110460 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill. Before attempting to use this
More informationAssembly Drawing: W-311B-A01, or as applicable Parts List: W-311B-A01-1, or as applicable Special Tools: , , &
REDQ Regulators Model 411B Barstock Design Powreactor Dome Regulator OPERATION AND MAINTENANCE Contents Scope..............................1 Installation..........................1 General Description....................1
More informationReciprocating saw attachment
Reciprocating saw attachment Model 96635 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More information1000 Lb. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011
1000 Lb. Electric Motorcycle Lift 66247 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationAIR HYDRAULIC RIVETER
AIR HYDRAULIC RIVETER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information10A ELECTRIC POWER HEAD 21142
10A ELECTRIC POWER HEAD 21142 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. CONTENTS Introduction... 2 General
More information14" 10A ELECTRIC DETHATCHER
14" 10A ELECTRIC DETHATCHER 27022 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. CONTENTS Contents... 2 Specifications...
More information1/2 DRIVE AIR IMPACT WRENCH STUBBY
1/2 DRIVE AIR IMPACT WRENCH STUBBY COMPACT AND LIGHT WEIGHT ONLY 610NM LONG TORQUE 122MM K13203 ED1 Sept 15 MAX LOW AIR CONSUMPTION TWIN HAMMER MECHANISM Table of Contents Know Your Product...1 General
More information3/8" Air Impact Wrench
3/8" Air Impact Wrench Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information2000 lb manual winch
2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationCOMPACT AIR COMPRESSOR
WHAT S IN THE BOX COMPACT AIR COMPRESSOR 24 L 2.0HP INSTRUCTION MANUAL SPECIFICATIONS Input: 230 240V ~ 50Hz Motor: 1500W S3:25% No Load Speed: 4,000/min Tank Volume: 24 litres Max. Pressure: 10 bar (145psi)
More informationPLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw
PLANT HAZARD REPORT Plant Description: Circular Saw PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser
More informationBelt Sander. Owner s Manual
Belt Sander Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationWALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL
WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety
More informationAIR COMPRESSOR KIT 6LITRE 1.5HP WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au MACP-015 STANDARD EQUIPMENT
STANDARD EQUIPMENT AIR COMPRESSOR KIT 6LITRE 1.5HP INSTRUCTION MANUAL SPECIFICATIONS Power supply: 220 240V ~ 50Hz Motor: 1200W (1.5HP) Tank Capacity: 6L No Load Speed: 3,450/min Max. Pressure: 8bar (116psi)
More informationSoot Buster. Operating and Maintenance Instructions. Fire Tube Boiler Cleaner
Soot Buster Fire Tube Boiler Cleaner Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com TABLE OF CONTENTS Introduction...
More informationOPERATOR'S MANUAL 10 in. (254 mm) ORBIT - BUFFER/POLISHER MODEL RB100
OPERATOR'S MANUAL 10 in. (254 mm) ORBIT - BUFFER/POLISHER MODEL RB100 SPECIFICATIONS: Orbital Diameter Rating Input No load Speed Net Weight 10 in. (254 mm) 120 Volts, 60 Hz, AC.75 Amps 3200 RPM 4.5 lbs.
More information12V AIR STATION ALL-IN-ONE
[ACT 027] Manual E 6/9/05 10:18 PM Page 3 Multi use 12V AIR STATION ALL-IN-ONE OWNER S MANUAL MODEL NO: C71A-54 KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL
More informationPRECISION PRODUCTS FOR THE HAND RELOADER
Tools Wilson Gages Over 80 years of Reloading Excellence! PRECISION PRODUCTS FOR THE HAND RELOADER 2008 Price Catalog L.E. (Sam) Wilson Tools Wilson Gages Founded in 1927, L.E. Wilson Tools and Gages,
More information20 Ton SD Shop Press Operating Instructions
20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
More informationAIR DIE GRINDER KIT ITEM # MODEL #SGY-AIR139. Français p. 14. Español p. 28 ATTACH YOUR RECEIPT HERE
ITEM #072332 KOBALT and the K & Design are registered trademarks of LF, LLC. All rights reserved. AIR DIE GRINDER KIT MODEL #SGY-AIR39 Français p. 4 Español p. 28 ATTACH YOUR RECEIPT HERE Serial Number
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More informationRARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
More information1/4 COMPOSITE AIR DIE GRINDER
1/4 COMPOSITE AIR DIE GRINDER 95029 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationPortable Electric Tools
A Health and Safety Guideline for Your Workplace Types Portable electric tools commonly used in industry are: drills, saws, sanders, buffers, grinders, impact wrenches, planers. Hazards The hazards associated
More informationMisaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii
Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6
More informationOPERATION & MAINTENANCE INSTRUCTIONS
1 /2 REVERSIBLE AIR DRILL MODEL NO: CAT123 PART NO: 3110879 OPERATION & MAINTENANCE INSTRUCTIONS GC1110 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More information