OPERATION & MAINTENANCE MANUAL
|
|
- Paulina Skinner
- 5 years ago
- Views:
Transcription
1 THUMB Imagery does not reflect actual product size T2017A OPERATION & MAINTENANCE MANUAL 1
2 2 T2017A
3 CONTENTS INTRODUCTION Owner Information 5 Warranty Registration 6 Key Features 7 To the Owner 8 SAFETY Safety Instructions 9 Pre-Start Check List 10 INSTALLATION PROCEDURE Installation 12 General Maintenance & Servicing 16 Suggested Greasing Product 17 OPERATION Hydraulic Requirements & Plumbing 18 Plumbing Circuit Diagram 19 Operating and Procedure 20 Precautions 21 MAINTENANCE Maintenance & Repair Log 22 Parts Diagram 23 T2017A 3
4 4 T2017A
5 INTRODUCTION OWNER INFORMATION Thank you for choosing to purchase your new Calibre (Thumb) from Calibre Contracting Equipment s (Calibre) range of earthmoving products. This manual contains important information about the installation, maintenance and safe operation of your Thumb. You can assist in this proactive safety approach by ensuring that all persons involved with the fitting and operation of the Thumb, read and understand these basic safety features and instructions. Calibre reserves the right of modification as a result of further technical developments with regard to the information and illustrations cited in this manual: Calibre and its suppliers have sole copyright of this manual The manual is intended solely for the use of the Thumb No part of this manual may be reprinted, translated or reproduced by any means without prior written permission from Calibre Utilisation for the purposes of competition is forbidden The Thumb is designed for safe and dependable service if installed, maintained and operated correctly We request that time be devoted to the study of installation and maintenance requirements. Users are also expected to familiarise themselves with the correct operation and use of the Thumb and its advised safety procedures. IMPORTANT NOTE To comply with Occupational Safety and Health requirements, a record must be made of all repairs, adjustments and regular maintenance events involving your Thumb. T2017A 5
6 INTRODUCTION WARRANTY REGISTRATION Upon purchasing your Thumb please complete and return this form immediately to your local Calibre branch. DATE OF DELIVERY: SERIAL NUMBER: I confirm that the operator(s) of the relevant excavator has read and understands the Operating Instructions and Warranty Terms, which relate to the Thumb. The Operator accepts that he/she is responsible for understanding safety and operation features of the Thumb. NAME: POSITlON: COMPANY: SIGNATURE: THE PURCHASER SHALL: Follow the recommended installation, testing and maintenance and operating procedures Comply with safety and training guidelines for use of equipment (not totally exclusive) Keep an accurate maintenance, operation, malfunction and repair log of equipment Ensure that the equipment is used for the purpose it was intended for 6 T2017A
7 INTRODUCTION KEY FEATURES Smart Valve Technology incorporated into cylinder Reinforced base plate for additional stiffness Compact within parked position No parking pin required Adjustable Thumb arm 7 7
8 INTRODUCTION TO THE OWNER As the new owner and/or operator of the Thumb we recommend that you take the time to read this Operation Manual carefully before commencing work. FOLLOW THE SAFETY INSTRUCTIONS Carefully read all the safety information contained in this manual Make sure all warning signs are securely fitted Immediately replace any signs which are missing or damaged Before starting work make sure you are familiar with the equipment, and where necessary with the machine and its control devices INFORMATION FOR THE USER The user of the Thumb is obliged to ensure that the equipment is always in safe working order in accordance with accident prevention regulations, Occupational Safety and Health or any other official instructions. WARRANTY REGULATION Calibre provides guarantees according to its sales and delivery conditions, extended to twelve months from delivery. The extended guarantee assumes proper operation and use as intended but will be nullified as a result of: Repairs or other intervention not undertaken by persons authorised by Calibre With use of accessories or replacement parts not approved by Calibre or which are not original replacement parts supplied by Calibre After the warranty period has expired, we strongly recommend the use of original replacement parts and manufacturer s replacement parts approved by Calibre. 8 T2017A
9 SAFETY SAFETY INSTRUCTIONS This safety alert symbol indicates important safety messages in this manual. When you see this symbol carefully read the message that follows and be alerted to the possibility of personal injury or death. WARNING: Incorrect operation of this machine can cause injury or death. Before using this machine make sure that every operator: Is instructed in safe and proper use of the attachment Reads and understands the manual pertaining to the attachment Reads and understands all safety decals and tags on the machine Clears the area of all other persons Learns and practices safely using attachment controls in a safe, clear area before operating this machine on a job site It is your responsibility to observe pertinent laws and regulations and follow Calibre instructions for operation and maintenance. T2017A 9
10 SAFETY PRE-START CHECK LIST Location: Date: Ref no: Hazards Identified: Work equipment Lifting devices Ergonomics Entanglement Crushing Access / exit Slip, trip and fall Plant movement Warning devices on equipment Noise Vibration Fumes Environmental People Affected YES NO N/A Involved in activity Close to activity Everyone on site Members of the public Expected Precautions YES NO N/A Has the operator been adequately trained on the use of the Thumb in general? Is there a checklist of daily and weekly inspections? Is there cab instructions for the Thumb? Personal Protective Equipment (PPE) Hard Hat High Visibility Vest Safety Boots Gloves Ear Protection Safety Glasses Other Management Assessed by: Name: Date: Reported to: Name: Date 10 T2017A
11 SAFETY Operator s Name: Calibre Serial No.: Calibre Model: Date: In Cab Operating Instructions (labels) Operating and Maintenance Manual M O N T U E W E D T H U F R I S A T S U N Hydraulic System Wear or damage to hoses or fittings Security of hoses Hydraulic oil leaks Thumb Coupler Security of mounting pins, locking bolts and nuts Is the attachment safe to use? YES or NO Lubrication Greasing in accordance with Calibre instructions Operator Signature Manager Signature T2017A 11
12 INSTALLATION PROCEDURE INSTALLATION STEP 1: CHECK EXISTING DIPPER SURFACE FOR DOUBLER PLATES/WEAR BARS Some machines have a doubler plate or wear bars welded to the inside of the dipper arm. Before fitting the thumb to the dipper arm these have to be modified. If your machine has a doubler plate (Fig 1.1), it may need to be extended by adding a doubler extension (Fig 1.2), this is to ensure a good weld all around the end of the Thumb baseplate. The doubler should be wider than the Thumb baseplate by 8-10mm to allow a good fillet weld (also refer step 3 for a positioning suggestion). Doubler extension Doubler Fig 1.1 Doubler Fig 1.2 If your machine has wear bars (Fig 1.3), you will need to remove these and grind the area smooth so the Thumb will sit flat on the dipper. Wear bars Fig T2017A
13 INSTALLATION PROCEDURE STEP 2: TRIM THUMB BASEPLATE WIDTH (IF NECESSARY) Because different machines have different dipper widths, the thumb baseplate provided is made to the widest known dipper width. This means that the baseplate may need to be trimmed in width to suit your machine. Depending on your machine you may need to trim the sides of the baseplate to: A) Line up with the welds that join the dipper arm top and side plates (Fig 1.4). Dipper Arm Welds aligned Thumb baseplate Fig 1.4-Section through Dipper Arm and Thumb B) Fit approximately 8-10mm within any doubler plate or extension welded to dipper (Fig 1.5). Doubler T2017A Fig
14 INSTALLATION PROCEDURE STEP 3: LAYOUT OF THUMB 1. Put the attachment with the greatest forward protrusion on the machine/hitch and fully crowd attachment towards machine. 2. Position the Thumb assembly so the closest point of the Thumb is approximately 50mm to the closest point of the equipment on the dipper (Fig 1.6). Note: this will also allow you to measure the distance you will need to increase the doubler by at the other end (refer Step 1). 20 TIP: Use a piece of 20mm to set the gap Fig 1.6 Once positioned, stitch weld (approx. 20mm stiches) each side of the Thumb baseplate to the dipper arm in locations shown in Fig 1.7. Standing clear of the Thumb and attachment, crowd the attachment in/out and open/close the Thumb to check the Thumb operates in the desired range. Stitch weld Fig T2017A
15 INSTALLATION PROCEDURE STEP 4: WELDING WARNING: Never weld straight across the dipper as this can cause the dipper arm to crack/fail along the weld. Always curve/angle plates running across the dipper arm. Make sure machine or batteries are isolated before welding. 1. Ensure that the earth lead is attached near the cylinder mount. DO NOT attach earth lead to the hydraulic cylinder. 2. Grind all surfaces that will be welded before welding. 3. The welds should be a well penetrated fillet of approximately 8-10mm all around. 4. Ensure to weld the baseplate to the dipper inside all plug welds provided. 8-10mm fillet weld all around Fig 1.8 T2017A 15
16 DAILY MAINTENANCE - Grease all grease points twice daily (see greasing tips) - Remove solid materials, stones etc from around moving parts - Check hoses and fittings for signs of leak or wear - Check all pin retainer bolts and nuts for tightness - Check hydraulic cylinder mounting bolts for tightness - Check for damage and cracks INSTALLATION PROCEDURE GENERAL MAINTENANCE & SERVICING GREASING Greasing must be carried out twice daily! We recommend before starting work, and before restarting after lunch. 16 T2017A
17 INSTALLATION PROCEDURE SUGGESTED GREASING PRODUCTS SUGGESTED REQUIREMENTS: NLGI Grade 2 Lithium Complex Base Better ones contain 3-5% Moly (MoS2/ Molybdenum Disulfide) additive Base Oil 40 degrees C exceeds 300 cst Exceeds 28kg on Timken OK Load Test Contains high tack / adhesive qualities / Resists water washout SUGGESTED PRODUCTS: Moreys BigFoot EP2 Moreys Moly Complex EP2 Moreys Super Red Premium Waterproof Cat Ultra 3Moly Grease NGI2 Trans Diesel Super Red Lith Tac EP2 Shell Gadus S3 V460D Mobil Grease XHP 462 Moly Any Mobil XHP 460 Grease Gulf Western Red Lith Tac GENERAL NOTE: Recommended greases are generally hard to pump because of their high viscosity. A quality 10000psi gun will give guaranteed results. T2017A 17
18 OPERATION HYDRAULIC REQUIREMENTS & PLUMBING THUMB CIRCUIT REQUIREMENTS Operating Pressure PSI Hose/ Tube Size 3/8 Minimum Flow Rate 15 LPM Min. 47 LPM Max. (must not be exceeded) Port Connecting (Calibre Supplied) 3/8 BSPP Female x3 *Ensure that the operating hydraulic pressure is set at a minimum of 206 Bar (3000PSI) on A and B line. Pressure and flow need to be checked at connecting hose to Thumb cylinder. 18 T2017A
19 OPERATION PLUMBING CIRCUIT DIAGRAM T2017A 19
20 OPERATION OPERATING AND PROCEDURE TO OPEN 1. Extend dipper arm close to horizontal 2. Extend SHS (square hollow section) arm fully until it stops 1. Retract cylinder slightly until it stops 1. Thumb should drop slightly over centre under its own weight 2. Extend the cylinder to move the Thumb outwards. Thumb is ready to use. Tip: If the thumb doesn t drop slightly under its own weight, pulse the cylinder controls open/closed. TO CLOSE 1. Tuck in dipper arm close to machine 2. Retract cylinder fully until it stops 1. Thumb should drop slightly over centre under its own weight. 1. Extend cylinder fully to close Thumb onto stops 2. Retract SHS (square hollow section) arm 20 T2017A
21 OPERATION PRECAUTIONS A Calibre Thumb is a medium duty piece of equipment not to be used for purposes where a heavy duty Power Claw or grab type attachments would otherwise be used. The Thumb is designed to be used in conjunction with a standard bucket and should only experience forces exerted by the opposing bucket as shown below. Care needs to be taken when the Thumb cylinder is fully extended, that the thumb does not experience any loading that tries to over extend the cylinder. (e.g. when the dipper is being moved towards the operator and the thumb catches onto an object). Failure to do so will result in evident damage to the cylinder end and will VOID ANY WARRANTIES. THE CALIBRE THUMB IS DESIGNED TO HOLD A LOAD AGAINST A SUITABLE BUCKET OR RIPPER: ü FORCE û FORCE Do not exert load on the back of the Thumb (e.g. Do not pull anything towards the cab with the Thumb) Do not exert load on the side of the Thumb (e.g. do not slew) Do not pull stumps or other items out of the ground with the Thumb Do not use with items longer than the machine width If fitted with tilting coupler, do not tilt coupler with Thumb extended Always ensure that any tilting hitches or buckets are locked in a horizontal position and cannot creep or tilt before using the Thumb Always ensure that the centre of gravity of the load is in line with the centre of the dipper and Thumb Always ensure that the ram and base are free from dirt or debris when extending or retracting the Thumb Always ensure that any people or property are well clear of your work area T2017A 21
22 MAINTENANCE MAINTENANCE & REPAIR LOG DATE FAULT REPAIR BY WHOM 22 T2017A
23 MAINTENANCE PARTS DIAGRAM T2017A 23
24 MAINTENANCE 24 T2017A
25 T2017A 25 January Version 2017
26 CALIBRE Contracting Equipment Australia 59 Magnesium Drive, Crestmead, Australia CALIBRE Contracting Equipment New Zealand 49 McLaughlins Road, Wiri, Auckland T2017A
1 2 CONTENTS INTRODUCTION Owner Information 4 Warranty Registration 5 Safety Instructions Safety 6 Safety Decals 7 Safety Identification Labels 8 Safety Notice 10 Safety Standards 11 Risk Assessment 13
More informationFRONT & REAR LOCK OPERATION & MAINTENANCE MANUAL
RAM-TILT COUPLER Imagery does not reflect actual product size FRONT & REAR LOCK OPERATION & MAINTENANCE MANUAL CONTENTS INTRODUCTION Owner Information 4 Warranty Registration 5 Key Features 6 Ram-Tilt
More informationWerk-Brau D-Lock Coupler Installation and Operation Manual
Werk-Brau D-Lock Coupler Installation and Operation Manual SERIAL NUMBER: The D-Lock Coupler (Fully Automatic with Dual Pin Locking) International Patents pending IMPORTANT: The booklet should be kept
More informationThis section provides general information and recommendations required prior to installing, operating or maintaining your KAT Master Hitch.
WBM Parts and Installation Manual for KAT Master Hitch General Information This section provides general information and recommendations required prior to installing, operating or maintaining your KAT
More informationInstallation and Service Manual
An Actuant Company Installation and Service Manual Heavy Duty Hydraulic Stabilization Legs CONTENTS Part # 3010003129 REV 0D Section Page 1.0 Receiving Instructions 2 2.0 Safety Issues 2 3.0 Hydraulic
More informationWBM Installation Manual KAT Master Hitch
WBM Installation Manual KAT Master Hitch General Information This section provides general information and recommendations required prior to installing, operating or maintaining your KAT Master Hitch.
More information35 TON HYDRAULIC PUNCH WARNING
OPERATORS GUIDE REL-35T-PNC 35 TON HYDRAULIC PUNCH NOTICE Sizes, weights and tool specifications listed in this manual are subject to change without notice. Please consult factory for information and updates.
More information30T A/Manual Hydraulic Shop Press
30T A/Manual Hydraulic Shop Press Operation Manual 1 1. Important Information 1.1 Safety Information 1.1.1 Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when
More informationINSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT
INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT P.O. Box 1058 1058 West Industrial Avenue Guthrie, OK 73044-1058 405-282-5200 FAX: 405-282-8105 www.autoquip.com Item # 830ABS Version 1.0 07/2001
More informationREL-46 WARNING NOTICE 15 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD. Compatible with RELIABLE R15 and P Style dies. REL-46 Manual
OPERATORS ORS GUIDE REL-46 15 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD Compatible with RELIABLE R15 and P Style dies. RELIABLE EQUIPMENT & SERVICE CO., INC. 301 Ivyland Road Warminster, PA 18974
More informationREL-510H WARNING NOTICE 12 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD
OPERATORS ORS GUIDE REL-510H 12 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD Compatible with U style and RELIABLE R12 shell type 12 ton compression dies. RELIABLE EQUIPMENT & SERVICE CO., INC. 92 Steamwhistle
More informationHYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL
HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual
More informationSafety and operating instructions
Safety and operating instructions Oil flow dividers 5, 8 www.cp.com 2 Contents Contents Introduction....................................................................... 5 About the Safety and operating
More information60 Drum Style Spike Aerator
60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationTube-Line Accelerator Spinner Kit
Tube-Line Accelerator Spinner Kit Operator's Manual PP-00799 (19/09/11) 2 TO THE OWNER This manual contains information concerning the adjustment, assembly and maintenance of your Tube-Line Spinner Kit.
More informationMODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST
MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read
More informationParts & Operators Manual
Parts & Operators Manual (888) 317-5878 www.talet.ca To The Owner General Comments Congratulations on the purchase of your new Talet Mat Grapple. Your unit was carefully designed and manufactured to give
More informationPressure Relief Valve Instruction Manual
CVR3-M0_062017 Pressure Relief Valve Instruction Manual MODEL: CVR3 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website:
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More informationSAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT
SAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT Personal Protective Equipment Foot Hearing High Visibility Head Eye Day Operations Normal Requirements: Safety footwear, hearing protection,
More informationMeuangvang Development Co.LTD Standard Working Procedure 058 Use of Hydraulic Torqueing Devices
1. Application To provide a standard work procedure for as required in accordance with Meuangvang Development Co Ltd Safety Management Program 2. Revision Schedule Rev # Old Section Ref New Section Ref
More informationModel No.: SFC-ED Torque Tool Serial No.: SFC Ref No.:
Model No.: SFC-ED Torque Tool Serial No.: SFC Ref No.: CONTENTS 1 Contents Page & Introduction 2 Training Requirements & General Safety 3 SFC ED Tool Models Covered By Manual Noise & Vibration Levels 4
More informationDK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationRugged Powered Bin Lifter. Operating Manual
Rugged Powered Bin Lifter Operating Manual Rugged Powered Bin Lifter Operating Manual OM0016E/2 This manual contains important safety, installation and operating instructions for this unit. Read this manual
More informationWARNING. RELIABLE EQUIPMENT & SERVICE CO., INC. 301 Ivyland Road Warminster, PA USA Phone: Fax:
OPERATOR'S GUIDE Pivot style control valves may be operated with one hand, leaving the second hand free to control the head. Lever locks in the forward position for tool advance, and in the rear position
More informationHYDRAULIC PUNCH DRIVER 38456, 38520, 7306 / 7306SB, 7310 / 7310SB, 7506, 7606SB, 7610SB, 7625 / 7625Pg / 7625PgSB, 7646 / 7646Pg / 7646PgSB
INSTRUCTION MANUAL HYDRAULIC PUNCH DRIVER 38456, 38520, 7306 / 7306SB, 7310 / 7310SB, 7506, 7606SB, 7610SB, 7625 / 7625Pg / 7625PgSB, 7646 / 7646Pg / 7646PgSB Read and understand all of the instructions
More informationGeneral Information. NTA607HD Lift Assist Adjustments. Tools Required. Work Location. Notations and Conventions U B F D R B F L
Great Plains Manufacturing, Inc. 1 NTA607HD Lift Assist Adjustments Null4: When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives
More information4-BIKE HITCH RACK OWNER S MANUAL
4-BIKE HITCH RACK OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationOperator s Manual. with Maintenance Schedule. Fourth Edition Second Printing Part No
Operator s Manual with Maintenance Schedule Fourth Edition Second Printing Part No. 82297 Operator s Manual Fourth Edition Second Printing Important Read, understand and obey these safety rules and operating
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFT LINE CUTTER SL55 PRODUCT CODE No. 980504 INSTRUCTIONS FOR INSTALLATION,
More informationQ-POWER 106 SERIES HYDRAULIC SQUEEZE CHUTE PRODUCT MANUAL arrowquip.com
Q-POWER 106 SERIES HYDRAULIC SQUEEZE CHUTE PRODUCT MANUAL 1-877-275-6075 cs@arrowquip.com arrowquip.com CONTENTS General Description of the Q-Power 106 Series Hydraulic 1 Squeeze Chute Safety Precautions
More information750 Cable Cutter INSTRUCTION MANUAL
INSTRUCTION MANUAL 750 Cable Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com
More informationHYDRAULIC INTENSIFIER Max. Pressure: See Intensifier Data Plate Weight: 16 Lbs. (7.26 kg)
Form No. 102897 Operating Instructions for: HB443 HB444 HYDRAULIC INTENSIFIER Max. Pressure: See Intensifier Data Plate Weight: 16 Lbs. (7.26 kg) Definition: A devise that raises the inlet pressure to
More information3 Post Pressure Fit System Owner s Manual
3 Post Pressure Fit System Owner s Manual Use and Care Trouble Shooting Warranty Information Table of Contents 3 Post Pressure Fit System Introduction... 3 Overview of the 3 Post Pressure Fit System...
More informationOPERATOR'S & PARTS MANUAL
MULTI-TASK ATTACHMENT OPERATOR'S & PARTS MANUAL OM638 8963 11-5-04-3 REV. 3 75538 IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become
More information20 Ton SD Shop Press Operating Instructions
20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
More informationHercules Space Saver Sole Press series
Hercules Space Saver Sole Press series HERCULESSSD Also available in single, SKU: HERCULESSS Operator Manual Manufactured by: 2 HERCULES SPACE SAVER PRESS GENERAL DESCRIPTION Your Hercules Press is designed
More informationCLAY DIGGER. Safety, Operating, Maintenance Instructions & Spare Parts List MCD-30A 1" MCD-30A 7/8"
CLAY DIGGER Safety, Operating, Maintenance Instructions & Spare Parts List MCD-30A 1" MCD-30A 7/8" Read and understand this manual and all other safety instructions before using the equipment. CONTENTS
More informationHPB25 Hydraulic Paving Breaker
INSTRUCTION MANUAL HPB25 Hydraulic Paving Breaker Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com
More informationSafety and operating instructions
BV 20H Safety and operating instructions Beams and screeds BV 20H Contents Contents Introduction........................................................................ 5 About the Safety and operating
More informationModel Visit our website at:
6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationPROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road
PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves
More informationRISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2
PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Excavator Models 322 341, (Series D & G) CONTENTS Applicability Standards referenced in the preparation
More informationINSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL
WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...
More informationREV0709. Parts List. Hydraulic Cylinder Model MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER. Max. Capacity: 55.2 Tons at 10,000 PSI
REV0709 Parts List Hydraulic Cylinder Model 10312 MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER Max. Capacity: 55.2 Tons at 10,000 PSI REV0709 Item No. Part No. No. Req d Description 1 10606
More informationINTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More information444C DUAL PERFORMANCE VALUE PACK
(Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL
More informationOperation Manual Guillotine Cutter RC-5
Operation Manual Guillotine Cutter RC-5 Technical Specifications General Safety/Operating Instructions Using the Guillotine Cutter/Crimper Blade Change Instructions Maintenance Instructions This is a detailed
More informationMODEL 840 AIR HYDRAULIC PUMP INSTRUCTION
MODEL 840 AIR HYDRAULIC PUMP INSTRUCTION Jackco Transnational Inc. 202 South El Monte, CA 888-452-2526 www.jackco.com FOR YOUR SAFETY Read all instructions, warnings and cautions carefully. Follow all
More informationKRAC KC-600 PLOW OPERATOR S MANUAL
PLOW OPERATOR S MANUAL RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com JANUARY 2015 THE INFORMATION
More informationDRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.
DR ` DRAG HARROW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and
More informationCULTIVATOR SAFETY SECTION
CULTIVATOR SAFETY SECTION The above safety-alert symbol means ATTENTION! Be Alert! Your personal safety is involved This symbol draws your attention to important instructions concerning your personal safety.
More informationDR19 HYDRAULIC DIGGER
DR19 HYDRAULIC DIGGER USER MANUAL Safety, Operation and Maintenance 2014 Stanley Black & Decker, Inc. New Britain, CT 06053 U.S.A. 62213 9/2014 Ver. 4 TABLE OF CONTENTS SAFETY SYMBOLS...4 SAFETY PRECAUTIONS...5
More informationOperating Instructions for BAIR22-6 AIR-POWERED CRIMPING TOOL
Operating Instructions for BAIR22-6 AIR-POWERED CRIMPING TOOL Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Table of Contents
More informationCylinder Tilt Saddle Instruction Manual
Cylinder Tilt Saddle Instruction Manual MODELS: SDT05, SDT10, SDT15, SDT25 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More informationRARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
More information1ml] ARROWQUIP COM-CATCH 61 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL arrowquip.com
1ml] ARROWQUIP COM-CATCH 61 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL 1-866-383-7827 operations@arrowquip.com arrowquip.com CONTENTS 1. General Description of the Com-Catch 61 Series Manual Squeeze Chute
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More information75 Ton SD Shop Press Operating Instructions
75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
More informationFlexfence Swaging Unit. Product Manual. Release 02/16.
Product Manual www.ingalcivil.com.au 1.0 Safety Precautions 1.1 Personal Protection While operating this equipment it is recommended that the following personal protective equipment be worn; Long sleeve
More informationCUT OFF TOOL MODEL: CAT113
CUT OFF TOOL MODEL: CAT113 Part No: 3120135 ASSEMBLY & INSTRUCTION MANUAL LS0309 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you
More informationHANDBOOK. Squeeze Off Unit SOU 400. Please refer any queries to:
HANDBOOK Squeeze Off Unit SOU 400 Please refer any queries to: Hy Ram Engineering Co Ltd Pelham Street Mansfield Nottinghamshire NG18 2EY Telephone No: (01623) 422982 Please note all queries should state
More informationPRESSURE TEST PUMP OPERATING & MAINTENANCE INSTRUCTIONS. Model No: PTP100. Part No: GC01/09
PRESSURE TEST PUMP Model No: PTP00 Part No: 06020 OPERATING & MAINTENANCE INSTRUCTIONS GC0/09 INTRODUCTION Thank you for purchasing this CLARKE Pressure Testing Pump. Before attempting to use the product,
More informationSAILTEC, INC CONGER COURT, OSHKOSH, WI USA
OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"
More information56 Bypass Mini Grapple
56 Bypass Mini Grapple T-1001 1 INTRODUCTION Branch Manager Attachments would like you to be completely satisfied with your new product, so please contact us for help with service, replacement parts, or
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFTLINE CUTTER SL80 PRODUCT CODE No. 980248 INSTRUCTIONS FOR INSTALLATION,
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationVL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns , , , , , )
VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns 3714022, 3714028, 3714034, 3714040, 3714043, 3714046) REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112103 04/09/18 1 SAFETY 1.1 INTRODUCTION
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationPressure Fit System - Two Post Version Owner s Manual
Pressure Fit System - Two Post Version Owner s Manual Use and Care Trouble Shooting Warranty Information Table of Contents Pressure Fit System Introduction... 3 Overview of the Pressure Fit System... 3
More informationVF80 HYDRAULIC VENTILATING FAN. Safety, Operation and Maintenance Stanley Black & Decker, Inc. New Britain, CT U.S.A /2013 Ver.
VF80 HYDRAULIC VENTILATING FAN Safety, Operation and Maintenance USER MANUAL 2012 Stanley Black & Decker, Inc. New Britain, CT 06053 U.S.A. 07193 1/2013 Ver. 4 TABLE OF CONTENTS SAFETY SYMBOLS...4 SAFETY
More informationOperating Instructions and Parts Manual 24529
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More informationCONTENTS: 57100AH 100 Ton Air/Hydraulic Shop Press OWNER'S MANUAL
OWNER'S MANUAL CONTENTS: Page 1 Warning Information 2 Specifications, Operating Instructions and Notes 3 Inspection, Safety Instructions and Limited Warranty 4 Parts Diagram PRESS SPECIFICATIONS Sunex
More informationTAMPERS WARNING NOTICE. Reliable s REL-TMP Series makes quick work of setting poles, asphalt patch and general construction backfill compacting.
OPERATORS GUIDE REL-TMP HYDRAULIC TAMPERS Reliable s REL-TMP Series makes quick work of setting poles, asphalt patch and general construction backfill compacting. All information found in this guide must
More informationOPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS
OPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS Declaration of conformity AirVANTAGE Tools 10018 Lower Azusa Road, Unit #C; El Monte, California 91731 USA declare on
More informationTechnical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
More informationInstruction Sheet 1.0 IMPORTANT RECEIVING INSTRUCTIONS 2.0 SAFETY. 2.1 Introduction. 2.2 Hydraulic Cylinder Safety Precautions (RT-Series)
Instruction Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. L4211 Rev. A 09/17 RT-Series Multi-Stage Telescopic Hydraulic Cylinders Table of Contents Page 1.0 IMPORTANT RECEIVING INSTRUCTIONS... 1 2.0 SAFETY...
More informationTwo-stage valve type NE
Two-stage valve type NE Product documentation Operating pressure pmax: Flow rate Qmax: 700 bar (High pressure) 80 bar (Low pressure) 25 lpm (High pressure) 180 lpm (Low pressure) D 7161 03-2017-1.0 by
More informationManual winch MANISTOR 100 and 200
Manual wall winch Manual winch MANISTOR 100 and 200 Instruction manual UK 173-192.10-3 PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO NF EN 13157 STANDARD REGISTERED DESIGN To ensure the constant improvement
More informationComposite Pistol-Type Air Needle Scaler OWNER S MANUAL
Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationINSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures
INSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures MINT-0289-XX TABLE OF CONTENTS Limited Warranty... 3 User Responsibility... 3-4 General Service... 4 Safety Precautions.... 5 Physical Dimensions..
More informationDR19 HYDRAULIC DIGGER
DR19 HYDRAULIC DIGGER USER MANUAL Safety, Operation and Maintenance 2014 STANLEY Black & Decker, Inc. New Britain, CT 06053 U.S.A. 62213 12/2017 Ver. 7 TABLE OF CONTENTS SAFETY SYMBOLS...4 TOOL STICKERS
More informationAIR STAPLER. MODEL: CSG3KC Part No OPERATING & MAINTENANCE INSTRUCTIONS
AIR STAPLER MODEL: CSG3KC Part No. 3110380 0506 OPERATING & MAINTENANCE INSTRUCTIONS SPECIFICATIONS Min. Hose Size (ID)... 6mm (1/4 ) Air Inlet Connector... 10mm Quick Fit Ave. Air Consumption... 0.4 cfm
More informationHydraulic Punch Drivers
SERVICE MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex Quick Draw Hydraulic Punch Drivers Serial Codes AHJ and YZ Read and understand all of the instructions and safety information in
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More informationTRI- B A L L H I TC H OWNER S MANUAL
TRI- B A L L H I TC H OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationAIR STAPLER MODEL: CSG1C Part No
AIR STAPLER MODEL: CSG1C Part No. 3110375 0506 OPERATING & MAINTENANCE INSTRUCTIONS SPECIFICATIONS Min. Hose Size (ID)... 6mm (1/4 ) Air Inlet Connector... 10mm Quick Fit Ave. Air Consumption... 0.27 cfm
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More informationdeluxe toilet safety support
deluxe toilet safety support Model 97388 Cleaning, Assembly, And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationInstruction sheet for Hydraulic Cylinder
Oper at or smanual 1088710891 Hydr aul i ccyl i nder s Instruction sheet for Hydraulic Cylinder NOTE PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE Yellow Jackit CYLINDERS. Carefully inspect all
More information1 DRIVE INDUSTRIAL IMPACT WRENCH
1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationInstructions for Use
Select-380 T-Auto T-Auto Contents Page Instructions for Use Ref: 3.0 IFU 380 T-Auto Mar 18 2 Schematic layout of the doser 3 Quick-fit instructions 4 Description/Installation/Operation Pump tubes & Water
More informationOPERATOR S MANUAL AND PARTS LISTING FOR THE. STM Mounted Harrow
MANUFACTURERS OF QUALITY AGRICULTURAL EQUIPMENT SINCE 1936 OPERATOR S MANUAL AND PARTS LISTING FOR THE STM Mounted Harrow With FH 5-Bar Section VERSION: 10-07AJF TO THE OWNER AND OPERATORS Before assembling
More informationINSTRUCTION MANUAL FOR UNDERWATER OPERATION
INSTRUCTION MANUAL FOR UNDERWATER OPERATION FOR HYDRAULIC HAMMER MODELS: H3XA, H4XE/4XL, H6XA, H7X Use Genuine NPK Parts 7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free
More informationLIFTING RIG Multi-Product Installation Rig
VISUAL INSPECTION CONDITION REPORT Review Date: Dec 13 LIFTING RIG Multi-Product Installation Rig Equipment Number Customer Dispatch/Receipt Date Out / / Date In / / Store Location Expected Return Date
More informationBray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning
More informationP/N for 1.25" SDR P/N for 1.50" SDR P/N for 2.00" SDR
CABLE OVERBLOWING JUNCTION BOX OPERATION & MAINTENANCE MANUAL P/N 89066 for 1.25" SDR P/N 89067 for 1.50" SDR P/N 89068 for 2.00" SDR Copyright 2017 by All rights reserved. No part of this publication
More information